Ardumoto - Motor Driver Shield
Asin: B00GM4PAO4 | Ean: 0757901941658 | UPC: 757901941658
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Manufacturer: Electronics123.com, Inc.
See On Amazon Similar To Ardumoto Motor Driver Shield
#1
HiLetgo L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board for Arduino Duemilanove Raspberry Pi
Asin: B01DG61YRM | Model: 3-01-0506 | PartNumber: 3-01-0506 | Ean: 0702082656945 | UPC: 702082656945
Tested Compatible For Arduino Mega, Diecimila & Duemilanove..
Multi-Function, Easy To Operate, A Strong Driver Library Support And Feature Updates..
2 Interface For 5V Servo Connected To The Arduino's High-Resolution Dedicated Timer - No Jitter..
Using This Chip You Can Use Dc Motors And Power Supplies Of Up To 10 Volts, That Some Pretty Big Motors And The Chip Can Supply A Maximum Current Of 600Ma Per Channel..
Features
- This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip.
- Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel.
- Tested compatible for Arduino Mega, Diecimila & Duemilanove.
- 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter.
- Multi-function, easy to operate, a strong driver library support and feature updates.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 2.16 x 2.67 x 0.78 Inches | Weight: 0.09 Pounds
See On Amazon #2
Arduino Motor Shield REV3 [A000079]
Asin: B0084ZQF3O | Model: A000079 | PartNumber: A000079 | Ean: 4250605584825, 5053252372468, 0609456348324, 7630049200371, 8349396200512 | UPC: 609456348324
Connect More To Your Board! It Works Also For Up To Four (External) Relays Or Solenoids..
External Power Input To Separate The Motor Power From The Microcontroller One..
Works With Your Arduino Uno, Uno Smd, Mega, And Leonardo..
Connect Other Sensors And Actuators Through The Shield’S Molex Connectors..
Features
- Control speed and direction for two DC motors, or just speed with four DC motors; drive a large stepper motor up to NEMA 17.
- Connect other sensors and actuators through the shield s Molex connectors.
- Connect more to your board! It works also for up to four (external) relays or solenoids.
- Works with your Arduino Uno, Uno SMD, Mega, and Leonardo.
- External power input to separate the motor power from the microcontroller one.
- See more on Amazon...
Brand: Arduino | Manufacturer: Arduino
Dimensions: 1.38 x 3.23 x 2.28 inches | Weight: 0.11 pounds
Warranty: as described on the official website
See On Amazon #3
KOOBOOK 1Pcs L298P Shield R3 Motor Driver Module Expansion Board H-Bridge 2A for Arduino UNO 2560
Asin: B07Y1J34P3 | Model: KOOBOOK | PartNumber: KOOBOOK | Ean: 0797806000685 | UPC: 797806000685
You Can Also Measure The Motor Current Absorption Of Each Motor, Among Other Features..
Max Current 2A Per Channel Or 4A Max (With External Power Supply).
Motor Drive Voltage: External Input 3-35V, Internal Input: 6-12V.
It Lets You Drive Two Dc Motors With Your Board, Controlling The Speed And Direction Of Each One Independently..
Features
- The Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors.
- It lets you drive two DC motors with your board, controlling the speed and direction of each one independently.
- You can also measure the motor current absorption of each motor, among other features.
- Motor drive voltage: external input 3-35V, internal input: 6-12V
- Max current 2A per channel or 4A max (with external power supply)
- See more on Amazon...
Brand: KOOBOOK | Manufacturer: KOOBOOK
See On Amazon #4
ACEIRMC 3D Printer CNC Shield V3 Engraver Expansion Board with 4X A4988 Driver Module and 4 x Radiator (Kits)
Asin: B07TT3C3HB | Ean: 0701715426405 | UPC: 701715426405
A4988 Stepper Motor Driver Board Is A Breakout Board For Allegro's A4988 Dmos Micro Stepping Driver With Translator And Overcurrent Protection;.
5.Cnc Shield Expansion Board V3.0 + A4988 Stepper Motor Driver With Heatsink For Arduino Kits K75.
Package Contents: 1 X Cnc Shield Board 4 X A4988 Stepper Motor Driver.
Pwm Spindle And Direction Pin: Pwm Spindle And Direction Pin, 4 Shaft Support (X, Y, Z, A - You Can Copy X, Y, Z Or Use Pin D12 And D13 Customize Firmware Perform Complete Shaft 4).
Features
- MAIN FUNCTION: The extension board can be used for engraving machine or 3D printer driver
- PWM SPINDLE AND DIRECTION PIN: PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
- A4988 Stepper Motor Driver Board is a breakout board for Allegro's A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection;
- Package Contents: 1 x CNC Shield Board 4 x A4988 Stepper Motor Driver
- 5.CNC Shield Expansion Board V3.0 + A4988 Stepper Motor Driver with Heatsink for Arduino Kits K75
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: Organizer
See On Amazon #5
HiLetgo TB6612 Mosfet for Arduino Motor Shield Standard IIC I2C TB6612FNG Stepper Motor PCA9685 PWM Servo Driver Shield V2 Robot PWM Uno Mega R3 Replace L293D
Asin: B073SP76MC | Model: 3-01-1428 | PartNumber: 3-01-1428
Completely Stackable Design: 5 Address-Select Pins Means Up To 32 Stackable Shields.
Feature: Motors Automatically Disabled On Power-Up.
Characteristic: Arduino Interface Is Fully Compatible Expansion.
Chip: Tb6612fng Motor Driver Chip.
Features
- H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak)
- Chip: TB6612FNG motor driver chip
- Completely stackable design: 5 address-select pins means up to 32 stackable shields
- Characteristic: Arduino interface is fully compatible expansion
- Feature: Motors automatically disabled on power-up
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #6
Adafruit Motor/Stepper/Servo Shield for Arduino v2.3 Kit
Asin: B00PUTH3B0 | Model: 1438 | PartNumber: 1438 | Ean: 0702658303396 | UPC: 702658303396
Instead Of A L293d Darlington Driver, We Now Have The Tb6612 Mosfet Driver: With 1.2A Per Channel And 3A Peak Current Capability. It Also Has Much Lower Voltage Drops Across The Motor So You Get More Torque Out Of Your Batteries, And There Are Built-In Flyback Diodes As Well..
As Of 3/21/2014 We Are Shipping Motor Shields With The Terminal Blocks, And Power Jumper Pre-Soldered On. You'll Still Need To Do A Little Soldering To Put On The Shield-Headers (Or Stacking Headers) But It Should Be Even Easier And Faster To Get Started!.
Instead Of Using A Latch And The Arduino's Pwm Pins, We Have A Fully-Dedicated Pwm Driver Chip Onboard. This Chip Handles All The Motor And Speed Controls Over I2c. Only Two Pins (Sda & Scl) Are Required To Drive The Multiple Motors, And Since It's I2c You Can Also Connect Any Other I2c Devices Or Shields To The Same Pins. This Also Makes It Drop-In Compatible With Any Arduino, Such As The Uno, Due, Leonardo And Mega R3..
Completely Stackable Design: 5 Address-Select Pins Means Up To 32 Stackable Shields: That's 64 Steppers Or 128 Dc Motors! What On Earth Could You Do With That Many Steppers? I Have No Idea But If You Come Up With Something Send Us A Photo Because That Would Be A Pretty Glorious Project..
Features
- New version 2.3!
- Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
- Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
- Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.
- As of 3/21/2014 we are shipping motor shields with the terminal blocks, and power jumper pre-soldered on. You'll still need to do a little soldering to put on the shield-headers (or stacking headers) but it should be even easier and faster to get started!
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.00 Pounds
See On Amazon #7
AITRIP 3PCS A4988 V3 Engraver Drive Shield 3D Printer CNC Drive Expansion Boards for Arduino 3D Printer CNC
Asin: B08XZ5T1JB | Ean: 0701715464902 | UPC: 701715464902
Stepper Motor Wiring As Follows: 2A, 2B Is A Group (Red, Green), 1A, 1B Is A Group (Blue, Yellow). If Want To Change Direction, Can Be Change The Position Of One Group , For Example 2A, 2B Mutually Exchanged..
Package Included : 3Pcs 3D Printer Cnc Expansion Board A4988 Driver Board.
Each Road Stepper Motors Only Need Two Io Ports. In Other Words, Six Io Ports Can Be Well Managed Three Stepper Motors. Very Convenient To Use..
Our Expansion Board As A Driver Expansion Board, Can Be Used For Engraving Machines, 3D Printers..
Features
- Uses removable A4988 compatible stepper drivers.
- our expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
- Stepper motor wiring as follows: 2A, 2B is a group (red, green), 1A, 1B is a group (blue, yellow). If want to change direction, can be change the position of one group , for example 2A, 2B mutually exchanged.
- Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
- Package Included : 3pcs 3D Printer CNC Expansion Board A4988 Driver Board
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
Dimensions: 0.70 x 2.67 x 2.08 inches
See On Amazon #8
LM YN 3D Printer Stepper Motor Driver Control Extension Shield Board for A4988 DRV8825
Asin: B01LWO9DI7 | Model: LY3DPS49885525 | PartNumber: LY3DPS49885525 | Ean: 0603983633205 | UPC: 603983633205
Jm Is Connected With The Motor. Jv Connection 5V And 12V-24V Power Supply..
Lm Yn 3D Printer Stepper Motor Driver Control Extension Shield Board User Manual Https://1Drv.Ms/B/S!Alzqucoyzqhkgxlpebdg8s1wtlng?E=X94260.
Jumper Hit On Dp Indicating The Position Of 16 Segments (4988) Or 32 Segments (8825)..
Features
- You can use the A4988/DRV8825, insert the attention direction, otherwise it will burn the drive.
- Jumper hit ON DP indicating the position of 16 segments (4988) or 32 segments (8825).
- Jm is connected with the motor. Jv connection 5V and 12V-24V power supply.
- LM YN 3D Printer Stepper Motor Driver Control Extension Shield Board User Manual https://1drv.ms/b/s!AlzQUCOyZQhKgXLPeBDG8s1WTLNG?e=x94260
- See more on Amazon...
Brand: LM YN | Manufacturer: LM YN
Dimensions: 0.59 x 1.65 x 1.65 inches
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #9
WWZMDiB 2Pcs L293D DC Stepper Motor Drive Shield Expansion Board for Arduino Raspberry Pi DIY Experiments
Asin: B0C9T22HLK | Model: L293D | PartNumber: L293D | Ean: 0705252403097 | UPC: 705252403097
Forward And Reverse Control Of Up To Two Stepper Motors Supporting Single/Dual Step Control, Interleaved Or Micro-Step Control, And Rotation Angle Control..
Pull-Down Resistors Ensure That The Motor Remains Stopped At Power-Up, Large Terminal Blocks Make Wiring Easier (10-22Awg), And External Power Terminals Are Supported To Ensure Separation Of Logic And Motor Drive Power..
With Reset Button And Two Large Terminal External Power Terminals..
Each Bridge Provides 0.6A (1.2A Peak) With Thermal Cutoff Protection And Supports A Voltage Range Of 5V To 36V..
Pmm Speed Control Of Up To Four Bi-Directional Dc Motors With Resolutions Up To 0.5%..
Features
- Coupling of two 5V servo motor (servo) ports to support high resolution and high accuracy timer jitter-free drives.
- PMM speed control of up to four bi-directional DC motors with resolutions up to 0.5%.
- Forward and reverse control of up to two stepper motors supporting single/dual step control, interleaved or micro-step control, and rotation angle control.
- Each bridge provides 0.6A (1.2A peak) with thermal cutoff protection and supports a voltage range of 5V to 36V.
- Pull-down resistors ensure that the motor remains stopped at power-up, large terminal blocks make wiring easier (10-22AWG), and external power terminals are supported to ensure separation of logic and motor drive power.
- With reset button and two large terminal external power terminals.
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #10
CNC Shield Expansion Board V3.0 + 4Pcs A4988 Stepper Motor Driver for Engraver 3D Printer DC 12V to 36V
Asin: B07DXNZ9PS | Ean: 0763741935009 | UPC: 763741935009
Compatible With Grbl 0.8: The Cnc Expansion Board Is Compatible With Grbl 0.8. Open-Source Firmware Operated On Uno, Converting G Code Command Into Stepping Signal.
Practical Design: This Stepping Motor Can Connect 4 Pin Connectors Or Be Soldered..
Pwm Spindle And Direction Pin: Pwm Spindle And Direction Pin, 4 Shaft Support (X, Y, Z, A - You Can Copy X, Y, Z Or Use Pin D12 And D13 Customize Firmware Perform Complete Shaft 4).
Main Function: The Extension Board Can Be Used For Engraving Machine Or 3D Printer Driver.
Features
- SUITABLE FOR : Use removable A4988 or DRV8825 compatible stepping driver
- MAIN FUNCTION: The extension board can be used for engraving machine or 3D printer driver
- COMPATIBLE WITH GRBL 0.8: The CNC Expansion Board is compatible with GRBL 0.8. Open-source firmware operated on UNO, converting G code command into stepping signal
- PWM SPINDLE AND DIRECTION PIN: PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
- PRACTICAL DESIGN: This stepping motor can connect 4 pin connectors or be soldered.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #11
DiGiYes L293D DC Motor Drive Stepper Motor Drive Shield Expansion Board Fit for Arduino / Duemilanove / Raspberry Pi
Asin: B0BSN8FTH2 | Model: ROA_20E | PartNumber: ROA_20E
Two 5V Servo Motor (Steering Gear) Ports Are Connected To The High-Resolution And High-Precision Timer Without Jitter..
4-Way H Bridge: L293d Chip Provides 0.6A (Crest 1.2A) Current For Each Bridge, With Thermal Power Off Protection, 4.5V To 36V..
Up To 4 Bidirectional Dc Motors And 4-Way Pwm Speed Regulation (About 0.5 Percent Resolution); Up To 2 Stepper Motors For Forward And Reverse Control, Single / Double Step Control, Staggered Or Micro Step And Rotation Angle Control..
It Can Drive 4-Way Dc Motor Or 2-Way Stepping Motor And 2-Way Steering Gear, Support Arduino Uno / Mega 2560..
Features
- This is a commonly used DC motor drive module, which uses 293D chip to drive small current DC motor.
- It can drive 4-way DC motor or 2-way stepping motor and 2-way steering gear, support Arduino UNO / Mega 2560.
- Two 5V servo motor (steering gear) ports are connected to the high-resolution and high-precision timer without jitter.
- Up to 4 bidirectional DC motors and 4-way PWM speed regulation (about 0.5 percent resolution); Up to 2 stepper motors for forward and reverse control, single / double step control, staggered or micro step and rotation angle control.
- 4-way H bridge: L293D chip provides 0.6A (crest 1.2A) current for each bridge, with thermal power off protection, 4.5V to 36V.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.86 x 2.75 x 2.16 Inches
See On Amazon #12
HiLetgo 3pcs Arduino Sensor Shield V5.0 Sensor Expansion Board for Arduino UNO R3
Asin: B01MXRXCAW | Model: 3-01-1192 | PartNumber: 3-01-1192
Size: 57 X 57 X 19Mm.
Buckled Port With Vcc, Gnd And Output.
Buckled Brick Cables.
Features
- Upgraded V5 Arduino Sensor Shield
- Buckled brick cables
- Size: 57 x 57 x 19mm
- Buckled port with VCC, GND and Output
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.75 x 2.24 x 2.24 inches
See On Amazon #13
Eagles L293D DC Motor Drive, 2 PCS Motor Control Shield Module Stepper Motor Drive Shield Expansion Board Compatible with Arduino,Diecimila,Duemilanove,Arduino UNO,Arduino Mega 2560
Asin: B0CBX7DQ9B | Model: power-converters 06 | PartNumber: power-converters 06 | Ean: 5714403704827
【4 H-Bridges】- Per Bridge Provides 0.6A (1.2A Peak Current) With Thermal Protection, Can Run Motors On Dc 4.5V To 36V.
【Multi-Function】- 2 Stepper Motors (Unipolar Or Bipolar) With Single Coil, Double Coil Or Interleaved Stepping, Ideal For Many Robot And Cnc Projects. Easy To Operate, A Strong Driver Library Support And Feature Updates, Please Email Us For More Data Packs.
【Compatibility】- Fully Compatible For Mega, Diecimila & Duemilanove.
【4 Channel】- This L293d Motor Control Shield Is A Monolithic Integrated, High Voltage, High Current, 4-Channel Driver. Can Drive 4 Dc Motors Or 2 Stepper Motors Or 2 Servo, Support The New Arduino Uno, Arduino Mega 2560.
Features
- l293d Motor Driver - This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip. L293D chip is a type of H-Bridge. 2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!
- 4 Channel - This L293D motor control shield is a monolithic integrated, high voltage, high current, 4-channel driver. Can drive 4 DC motors or 2 stepper motors or 2 Servo, support the new Arduino UNO, Arduino Mega 2560
- 4 H-Bridges - Per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on DC 4.5V to 36V
- Compatibility - Fully compatible for Mega, Diecimila & Duemilanove
- Multi-function - 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping, ideal for many robot and CNC projects. Easy to operate, a strong driver library support and feature updates, Please email us for more data packs
- See more on Amazon...
Brand: Eagles | Manufacturer: Eagles
See On Amazon #14
V3 Extension Board, CNC Expansion Board with 4pcs A4988 Stepper Motor Driver Heat Sink for Engraver 3D Printer DC 12V to 36V
Asin: B07DFK6ZJW | Ean: 0763741052379 | UPC: 763741052379
Compatible With Grbl 0.8: Compatible With Grbl 0.8. Open-Source Firmware Operated, Converting G Code Command Into Stepping. The Cnc Expansion Board Operates Within A Voltage Range Of Dc 12V To 36V, Ensuring Stable Power Supply..
Compact Design: The Stepping Motor Can Be Connected Using Convenient 4-Pin Connectors Or Soldered Directly For Added Stability..
Pwm Spindle And Direction Pin: Pwm Spindle And Direction Pin, 4 Shaft Support (X, Y, Z, A - You Can Copy X, Y, Z Or Use Pin D12 And D13 Customize Firmware Perform Complete Shaft 4).
Can Be Used For: The Extension Board Can Be Used For Engraving Machine Or 3D Printer Driver. The Included A4988 Stepper Motor Drivers Offer Various Protection Features, Such As Thermal Shutdown, Cross-Current Protection, Ground Fault Protection, And Short Circuit Protection, Ensuring A Safe And Reliable Operation..
Features
- HIGH COMPATIBILITY: The V3 Extension Board is designed to be compatible with removable A4988 or DRV8825 stepping drivers, making it suitable for both engraving machines and 3D printers. It is also compatible with GRBL 0.8 open-source firmware, ensuring seamless integration with your existing systems. NOTE:Use removable A4988 or DRV8825 compatible stepping driver
- CAN BE USED FOR: The extension board can be used for engraving machine or 3D printer driver. The included A4988 stepper motor drivers offer various protection features, such as thermal shutdown, cross-current protection, ground fault protection, and short circuit protection, ensuring a safe and reliable operation.
- COMPATIBLE WITH GRBL 0.8: Compatible with GRBL 0.8. Open-source firmware operated, converting G code command into stepping. The CNC Expansion Board operates within a voltage range of DC 12V to 36V, ensuring stable power supply.
- PWM SPINDLE AND DIRECTION PIN: PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
- COMPACT DESIGN: The stepping motor can be connected using convenient 4-pin connectors or soldered directly for added stability.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #15
V3 Engraver 3D Printer CNC Shield Expansion Module Board A4988 Driver Board fit Arduino
Asin: B07PDFYVTS | Model: 50336941123 | PartNumber: 50336941123 | Ean: 0682228946294 | UPC: 682228946294
☆Pwm Spindle And Direction Pins. 4-Axis Support. Runs On 12-36V Dc..
☆Stepper Motor Wiring As Follows: 2A, 2B Is A Group (Red, Green), 1A, 1B Is A Group (Blue, Yellow), If Want To Change Direction, Can Be Change The Position Of One Group , For Example 2A, 2B Mutually Exchanged..
☆It Is A Total Of Four Slots, Can Drive Four A4988 Stepper Motor. Each Road Stepper Motors Only Need Two Io Ports. In Other Words, Six Io Ports Can Be Well Managed Three Stepper Motors. Very Convenient To Use..
☆This Expansion Board As A Driver Expansion Board, Can Be Used For Engraving Machines, 3D Printers..
Features
- Each road stepper motors only need two IO ports.
- This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
- PWM Spindle and direction pins. 4-Axis support. Runs on 12-36V DC.
- It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
- Stepper motor wiring as follows: 2A, 2B is a group (red, green), 1A, 1B is a group (blue, yellow), if want to change direction, can be change the position of one group , for example 2A, 2B mutually exchanged.
- See more on Amazon...
Brand: Generic | Manufacturer: Does Not Apply
See On Amazon #16
HiLetgo 2pcs 3D Printer Stepper Motor Driver CNC Shield V4 Engraving Machine Expansion Board for Arduino Nano 3D Printer A4988
Asin: B0834KK49M | Model: 3-01-1645 | PartNumber: 3-01-1645
Grbl Compatible, Worked With Nano, Released The Digital Io Interface, Easy To Connect To Other Modules, Such As Endstop..
Compatible With Micro-Drive Laser Engraving Machine, Three-Axis Cnc Engraving Machine,..
Features
- 3D Printer Stepper Motor Driver CNC Shield V4 Engraving Machine Expansion Board
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine,.
- GRBL compatible, Worked with nano, released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #17
Haosie V3.0 CNC Shield Extension Board, 4PCS A4988 Stepper Motor Driver with 4PCS Heat Sinks for Engraver 3D Printer (DC 12V to 36V)
Asin: B0C6X9VVKM | Ean: 0628489655087 | UPC: 628489655087
【Use Mounting】Stepper Motors Can Be Connected To 4-Pin Connectors Or Soldered, Which Is A Set Of Disassembled Parts That Require Basic Welding Skills To Solder Them Together..
【Satisfactory Service】We Provide Free Return And Exchange Service, We Care About The Feelings Of All Customers, If You Have Any Details Or Questions About This Item, You Can Contact Us At Any Time, We Will Give You A Satisfactory Answer..
【Protection Function】Thermal Shutdown Circuit, Crossover Current Protection, Ground Fault Protection, Short Circuit Protection; Five-Step Modes: Full, 1/2, 1/4, 1/8, And 1/16 Mixed Slow Current Attenuation Modes..
【Pwm】Pwm Spindle And Direction Pins, 4-Axis Support (X, Y, Z, A- You Can Copy X, Y, Z Or Perform Full Axis 4 Using Pins D12 And D13 Custom Firmware).
Features
- Compatible Use detachable A4988 or DRV8825 compatible with stepping driver, GRBL 0.8 compatible, open source firmware, convert G-code commands into stepping signals.
- PWM PWM spindle and direction pins, 4-axis support (X, Y, Z, A- You can copy X, Y, Z or perform full axis 4 using pins D12 and D13 custom firmware)
- Use Mounting Stepper motors can be connected to 4-pin connectors or soldered, which is a set of disassembled parts that require basic welding skills to solder them together.
- Protection function Thermal shutdown circuit, crossover current protection, ground fault protection, short circuit protection; Five-step modes: full, 1/2, 1/4, 1/8, and 1/16 mixed slow current attenuation modes.
- Satisfactory Service We provide free return and exchange service, we care about the feelings of all customers, if you have any details or questions about this item, you can contact us at any time, we will give you a satisfactory answer.
- See more on Amazon...
Brand: Haosie | Manufacturer: Haosie
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.11 pounds
See On Amazon #18
HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino
Asin: B07RNLG3HB
Adopt Dedicated High-Power Motor Driver Chip L298p Which Can Directly Drive Two Dc Motors With Drive Current Up To 2A..
Adopt Dedicated High-Power Motor Driver Chip L298p Which Can Directly Drive Two Dc Motors With Drive Current Up To 2A..
Stack Design Can Be Directly Plugged Into The Arduino, Easier To Use..
The L298p Shield Dc Motor Driver Has Pwm Speed Control Mode; Dual High-Power H-Bridge Driver..
Features
- Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input.
- The L298P shield DC motor driver has PWM speed control mode; dual high-power H-bridge driver.
- Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
- Stack design can be directly plugged into the Arduino, easier to use.
- Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #19
2 PCS L293D DC Motor Drive, Aideepen Motor Control Shield Module Stepper Motor Drive Shield Expansion Board
Asin: B09Y1WB2VN | Model: 2-0100712 | PartNumber: 2-0100712
【4 H-Bridges】Per Bridge Provides 0.6A (1.2A Peak Current) With Thermal Protection, Can Run Motors On Dc 4.5V To 36V..
【Why Choose Us】2Pcs L293d Motor Control Shield,Multi-Function, Easy To Operate.Aideepen Specializes In Various Electronic Components,We Have Always Cared About The Customer Experience And Improve The Product Function Details,Please Feel Free To Contact Us..
【Double Coil】Up To 2 Stepper Motors (Unipolar Or Bipolar) With Single Coil, Double Coil Or Interleaved Stepping.Ideal For Many Robot And Cnc Projects..
【4-Channel】This L293d Motor Control Shield Is A Monolithic Integrated, High Voltage, High Current, 4-Channel Driver.Can Drive 4 Dc Motors Or 2 Stepper Motors Or 2 Servo..
Features
- L293D L293D chip is a type of H-Bridge. You can use DC motors and power supplies of up to 36 Volts, supply a maximum current of 600mA per channel.
- 4-channel This L293D motor control shield is a monolithic integrated, high voltage, high current, 4-channel driver.Can drive 4 DC motors or 2 stepper motors or 2 Servo.
- 4 H-Bridges per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on DC 4.5V to 36V.
- Double coil Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.ideal for many robot and CNC projects.
- Why choose us 2pcs L293D motor control shield,Multi-function, easy to operate.Aideepen specializes in various electronic components,We have always cared about the customer experience and improve the product function details,please feel free to contact us.
- See more on Amazon...
Brand: Aideepen | Manufacturer: Aideepen
See On Amazon #20
DAOKI Control Extension Shield Board 3D Printer Stepper Motor Driver with A4988 DRV8825 Dupont Cable,for 3D Printer Accessories
Asin: B09BQZBMGY | Model: JK-US-164-1 | PartNumber: JK-US-164-1
【Corresponding Connections】: Jm Connects The Motor; Jv Connects 5V And 12V-24V Power Supplies; Jc's Esdg Corresponds To The Enablestepdirgnd Drive Signal Output On The Connection..
【Item Condition】: The Module Is 100% Made Of Original Electronic Components, And The Product Is A Brand New Product, You Can Buy It With Confidence.
【More Favorable】: We Have Distributed Dupont Lines For You, Making It More Convenient For You To Use.
【Position Indication】: The Position Where The Jumper Hits The On Dp Indicates 16 Subdivisions (4988) Or 32 Subdivisions (8825)..
Features
- Use and attention : The A4988/DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt.
- Position indication : The position where the jumper hits the ON DP indicates 16 subdivisions (4988) or 32 subdivisions (8825).
- Corresponding connections : Jm connects the motor; Jv connects 5V and 12V-24V power supplies; Jc's ESDG corresponds to the EnableStepDirGnd drive signal output on the connection.
- More favorable : We have distributed Dupont lines for you, making it more convenient for you to use
- Item Condition : The module is 100% made of original electronic components, and the product is a brand new product, you can buy it with confidence
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
See On Amazon
Looking For Something Else?
Search