Peachtree Woodworking Supply Bottle Turning Kit with 5 Classic Chrome Stoppers 19/64 inch Drill Bit 1 inch 8 tpi Chuck and Ratcheting Handle with 3/8 inch Tap
Asin: B00HHG5IFW | Model: 7230 | PartNumber: 7230
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Classic Chrome Bottle Stoppers Are Made From A Solid (Not Hollow) Piece Of Metal Material With A Shiny, Great Looking, Chrome Coating. The Stoppers Have Six Protruding Flexible Rubber Seals That Provide You With An Airtight Seal When Preserving Your Wine!.
This Set Was Created To Make The Mounting Of Your Bottle Stopper To Your Lathe Much Easier. With This Kit, The Tapping Process Is Also Simplified With The Drill Bit And Ratcheting T-Handle Tap Which Are Included With This Set. You Will Be Able To Drill, Tap And Secure Your Custom Turned Bottle Stopper Handle To Your Choice Of Bottle Stoppers With Ease..
Not Only That, Each Stopper Has A 3/8” X 16 Tpi Threaded Stud Mounted On The Top For Attaching Any Custom Handle You Choose. You Can Use The Bottle Stoppers For Sealing Wine, Soda, Oil, Vinegar And More. To Clean, Wash With Warm Soapy Water Or Clean Them In A Dishwasher..
The Deluxe Bottle Stopper Set Includes The Following: 1 Each 1” X 8 Tpi Bottle Stopper Chuck, 1 Each 19/64” Drill Bit, 1 Each 3/8 Tap, 1 Each Ratcheting T-Handle And 5 Each Classic Chrome Bottle Stoppers. All Of This Comes In A Customizable Plastic Storage Case. Instructions Are Also Included..
Features
- If you enjoy wood, acrylic or resin turning then you are sure to enjoy this deluxe bottle stopper kit! It includes hardware and tools to create wonderful looking bottle stopper handles. With this kit, you ll be able to tap a 3/8 hole into your handle topper using the ratcheting T-handle and tap. Once the threaded hole is tapped, and the handle has been turned, attach your chrome bottle stopper and your all but ready to gift the perfect wine bottle stopper!
- The Deluxe Bottle Stopper Set includes the following: 1 each 1 x 8 tpi bottle stopper chuck, 1 each 19/64 drill bit, 1 each 3/8 tap, 1 each ratcheting T-handle and 5 each Classic Chrome bottle stoppers. All of this comes in a customizable plastic storage case. Instructions are also included.
- The classic chrome bottle stoppers are made from a solid (not hollow) piece of metal material with a shiny, great looking, chrome coating. The stoppers have six protruding flexible rubber seals that provide you with an airtight seal when preserving your wine!
- Not only that, each stopper has a 3/8 x 16 tpi threaded stud mounted on the top for attaching any custom handle you choose. You can use the bottle stoppers for sealing wine, soda, oil, vinegar and more. To clean, wash with warm soapy water or clean them in a dishwasher.
- This set was created to make the mounting of your bottle stopper to your lathe much easier. With this kit, the tapping process is also simplified with the drill bit and ratcheting T-handle tap which are included with this set. You will be able to drill, tap and secure your custom turned bottle stopper handle to your choice of bottle stoppers with ease.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking
See On Amazon Similar To Peachtree Woodworking Supply Bottle Turning
#1
Odie's Oil Universal Finish for Wood Leather Plastic Vinyl Metal and More 9 Ounce Glass Jar Food Safe and Solvent Free Non Toxic Finish
Asin: B07XKQ4LWX | Model: Geeloa | PartNumber: Geeloa | Ean: 0851366006218 | UPC: 851366006218
Features
- If youre looking for a wood finish that not only looks fantastic but is easy to apply look no further than Odies Oil. Our finish not only works on all species of wood its ideal for leather metal plastic and more! Odies Oil can also be used as a wood stabilizer and is food safe solvent free and non-toxic making it great for kitchen and cooking based projects.|Odies Oil is very easy to use. Simply wipe Odies Oil on to your project wait a while then buff it off. Unlike conventional wood finishes theres no sanding or stripping needed between coats or retouching. No solvents means there is almost nothing to evaporate so what you put on the wood stays in the wood. Odie's Oil covers many many times the area of other wood finishes. Up to 20 times the coverage as conventional finishes. Coverage will vary depending on wood density and porosity.|Odies Oil works with all species of wood exotic or domestic hard or soft. It has also been specially formulated to work on the oiliest of woods and still produce a wonderful looking sheen. A unique trait of our Odies Oil finish is that it tends to get better looking with age once it is applied. The finish contains natural UV inhibitors which are a sunscreen for your wood!|Where can I use Odies Oil? Odie's Oil is great for interior and exterior applications like Boats Brightwork Doors Floors Decks Gates Fine Furniture Patio Furniture Bowls Cutting Boards Kitchen Implements Toys auto detail concrete leather and metal etc. etc. The list goes on and on and on!
- See more on Amazon...
Brand: ODIE'S | Manufacturer: OCOOW LLC
Dimensions: 4.30 x 6.30 x 4.60 Inches | Weight: 0.56 Pounds
See On Amazon #2
Micro-Mesh 2 inch by 2 inch Double Sided Soft Touch Sanding Pads Ideal for Pen and Bottle Stopper Polishing. Perfect for Cycle Sanding Acrylic Materials with CA Glue Finish
Asin: B000H6EC4C | Model: STP-01 | PartNumber: STP-01 | Ean: 5915903721486, 4049933039516, 0810948010517 | UPC: 810948010517
The Pack Includes 1 Each 2 Inch By 2 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process..
Ideal For Use With Acrylics, Plastics, Resin Or Impregnated Blanks When Turning. Works Great On Automotive And Marine Body Work. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! Using The Step Up Process Will Leave Your Project Finish Looking Wonderful ..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .
- The pack includes 1 each 2 inch by 2 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work.
- Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface
Dimensions: 2.00 x 2.00 x 2.00 Inches | Weight: 0.02 pounds
See On Amazon #3
Sili Glue Roller with Sili Glue Tray for Arts Crafts Woodworking and Larger Glue Up Projects
Asin: B089QRP6J6 | Model: 4614 | PartNumber: 4614 | Ean: 0817918021689 | UPC: 817918021689
The Roller Itself Is A Has No Protruding Metal On One Side To Allow For Flush Passes On Your Glue Ups. This Means You Can Apply Glue Right Up Against Another Board And Have No Worries About Marring That Work Piece. This Also Makes It Easier To Glue Right Up To The Edge Of Your Project..
Both The Sili Roller And Tray Are Of Course Made From Silicone Rubber Which Means They Are Super Easy To Clean! You Can Simply Run Them Under Warm Water And Quickly Work The Glue Off With Your Fingers. You Can Also Let The Glue Dry Overnight And Then Crack And Peel The Glue Off Revealing A Clean, Ready To Go Surface Underneath. Either Way, It’S Quick And Virtually Painless To Clean The Sili Roller And Tray!.
Made Entirely Of Silicone Rubber, The Sili Tray Resembles A Paint Roller Tray But On A Smaller Scale And It Is More Flexible To Easily Dispense The Adhesives Back Into The Container After You Are Done. The Tray Has Been Designed For Use With The Sili Glue Roller (Not Included And Sold Separately), However It Can Be Used With Any Glue Brush Or Applicator That Fit Within Its Dimensions..
The Sili Glue Roller Is Made With Angled Grooves Which Allow The Glue To Be Worked Into The Roller And Help Retain The Glue On The Roller. The Recessed Grooves Also Keep The Glue From Dripping Too Quickly And Gives You Ample Time To Apply The Glue To Your Project Regardless Of Size. The Grooves Also Allow Just Enough Glue “Flow-Through” To Keep Things Rolling With Minimal Resistance. This Also Helps To Keep The Roller From Gliding Or Skating Across The Wood When Applying The Glue..
Features
- Designed to work together, the Sili Glue Roller and the Sili Glue Tray help you make quick work of larger glue up projects. It doesn t matter if you re an arts and crafts hobbyist, a professional woodworker or model making enthusiast, this combo pack will be a useful tool when you need to perform larger glue ups on your projects.
- The Sili Glue Roller is made with angled grooves which allow the glue to be worked into the roller and help retain the glue on the roller. The recessed grooves also keep the glue from dripping too quickly and gives you ample time to apply the glue to your project regardless of size. The grooves also allow just enough glue flow-through to keep things rolling with minimal resistance. This also helps to keep the roller from gliding or skating across the wood when applying the glue.
- The roller itself is a has no protruding metal on one side to allow for flush passes on your glue ups. This means you can apply glue right up against another board and have no worries about marring that work piece. This also makes it easier to glue right up to the edge of your project.
- Made entirely of silicone rubber, the Sili tray resembles a paint roller tray but on a smaller scale and it is more flexible to easily dispense the adhesives back into the container after you are done. The tray has been designed for use with the Sili Glue Roller (not included and sold separately), however it can be used with any glue brush or applicator that fit within its dimensions.
- Both the Sili Roller and Tray are of course made from silicone rubber which means they are super easy to clean! You can simply run them under warm water and quickly work the glue off with your fingers. You can also let the glue dry overnight and then crack and peel the glue off revealing a clean, ready to go surface underneath. Either way, it s quick and virtually painless to clean the Sili Roller and Tray!
- See more on Amazon...
Brand: Sili | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.00 Pounds
See On Amazon #4
Micro-Mesh Pen Sanding Kit
Asin: B0037MEIT2 | Ean: 0725123001139 | UPC: 725123001139
The Results Are Truly Wonderful And Will Most Definitely Please The Most Discriminate Of Eyes. The Pack Includes 1 Each 2 Inch By 2 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Works Great On Stabilized Woods, Acrylics & Solid Surface Materials. Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process. 9 Micro-Mesh Pads Included..
Ideal For Use With Plastics, Resin Or Impregnated Blanks When Turning. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! When Using The Pads It Is Recommended That Start At The Lower Grit Of 1500 And Step Or Cycle Your Way Up To The High Grit Of 12000..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000.
- The results are truly wonderful and will most definitely please the most discriminate of eyes. The pack includes 1 each 2 inch by 2 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with plastics, resin or impregnated blanks when turning. The pads can also be used around the home for fine repair work.
- Works great on stabilized woods, acrylics & solid surface materials. Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process. 9 Micro-Mesh Pads included.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod
Dimensions: 1.25 x 4.40 x 3.40 inches | Weight: 0.02 Pounds
See On Amazon #5
Peachtree Woodworking Supply Boxed Multi-Roll Assorted Abrasive Rolls for Wood Turners, Wood, Metal Workers, Automotive Body Work in Assorted Grits, Includes 150, 240, 320, 400 and 600 Grit Rolls
Asin: B0045WIZHO | Model: 7036 | PartNumber: 7036 | Ean: 0814310011959 | UPC: 814310011959
They Also Work On Most Any Type Of Material And Can Be Cut To Any Length Needed..
Each Roll Is Made From Hard To Find J-Weight Cloth Backed Sandpaper. Available In 150X, 240X, 320X, 400X, & 600X. The Center Opening Of Each Roll Is Approximately 1-1/2"..
Stepping Your Abrasives From Low Grit To High Grit Is An Essential Process For Finishing Your Pens, Pencils, Bottle Stoppers Or Any Wood Project In The Proper Manner..
Or You Can Reach For The Correct Grit Inside The Box Dispenser And Tear Off Just The Right Amount For Your Project. Each Grit Roll Is 1" Wide And Is Flexible Enough To Be Used On Most Any Shape. These Abrasive Strips Work Exceptionally Well On Rounded Objects Such As Turned Pens, Bottle Stoppers Or Any Other Smaller Type Of Turning..
Features
- Sometimes when we are sanding smaller objects, we need, well, a smaller piece or just a strip of sandpaper. We could always cut one of our expensive 9" x 11" sheets and hopefully not cut too much off.
- Or you can reach for the correct grit inside the box dispenser and tear off just the right amount for your project. Each grit roll is 1 wide and is flexible enough to be used on most any shape. These abrasive strips work exceptionally well on rounded objects such as turned pens, bottle stoppers or any other smaller type of turning.
- They also work on most any type of material and can be cut to any length needed.
- Stepping your abrasives from low grit to high grit is an essential process for finishing your pens, pencils, bottle stoppers or any wood project in the proper manner.
- Each roll is made from hard to find J-weight cloth backed sandpaper. Available in 150x, 240x, 320x, 400x, & 600x. The center opening of each roll is approximately 1-1/2.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree
Dimensions: 0.01 x 11.00 x 9.00 Inches
See On Amazon #6
Micro-Mesh 3 x 4 Soft Touch Pads
Asin: B003ELH7AI | Model: 3MSTP6VW | PartNumber: 3MSTP6VW | Ean: 0725123001146, 0696738137257, 5915903681476, 0082045098891, 5915903681469 | UPC: 725123001146, 082045098891, 696738137257
The Pack Includes 9 Each 3 Inch By 4 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process..
Ideal For Use With Acrylics, Plastics, Resin Or Impregnated Blanks When Turning. Works Great On Automotive And Marine Body Work. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! Using The Step Up Process Will Leave Your Project Finish Looking Wonderful ..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .
- The pack includes 9 each 3 inch by 4 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work.
- Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod.
Dimensions: 0.10 x 7.10 x 5.95 Inches | Weight: 0.20 pounds
See On Amazon #7
Savannah Classic Chrome Style Bottle Stopper with 3/8" x 16 tpi Threaded Post For Attaching Hand Made or Lathe Turned Handles (10 Chrome Stoppers)
Asin: B07N7KG39Y | Ean: 0817918022006 | UPC: 817918022006
The Stopper Measures Approximately 3¼” In Total Length And Is Approx. 57/64” In Diameter At The Top Or Widest End Of The Bottle Stopper. With Its Cone Shape And The Protruding Rubber Seals, The Bottle Stopper Provides The Perfect Fit For Most Any Wine Bottle..
Caution: Once You Make One Bottle Stopper, It Is Highly Likely That You Will Want To Continue Making More And More Bottle Stoppers. We As A Company Can Not Take Any Responsibility In Regards To The Addictive Nature Of This Hobby. Please Enjoy!.
The Classic Chrome Style Is Simple In Design And That Makes It Compatible With Many Different Styles And Types Of Handles. It Looks Great With Standard Wooden Turned Handles, Acrylic Turned Handles, Metal Turned Handles Or Even Handles That Are Not Turned..
With A 3/8” X 16 Tpi (Threads Per Inch) Stud On The Top Side Of The Stopper, You Can Attach The Stopper To Most Anything With A Matching Thread Size. You Can Tap A Threaded Hole Directly Into Your Stock Or You Can Use A Threaded Insert (Sold Separately) That Would Be Embedded Into Your Stock Piece. Most Woodturners Prefer To Use An Insert Since It Is More Stable Over Time And Provides A Secure Fit That Will Last..
Features
- Add some curb appeal to your wine bottles by creating your very own bottle stopper! The Classic Chrome Bottle Stopper is sure to turn heads once you have mounted your very own and unique handle or topper. From hand made handles or toppers to lathe turned bottle stoppers, your only limitation is your imagination!
- With a 3/8 x 16 tpi (threads per inch) stud on the top side of the stopper, you can attach the stopper to most anything with a matching thread size. You can tap a threaded hole directly into your stock or you can use a threaded insert (sold separately) that would be embedded into your stock piece. Most woodturners prefer to use an insert since it is more stable over time and provides a secure fit that will last.
- The stopper measures approximately 3 in total length and is approx. 57/64 in diameter at the top or widest end of the bottle stopper. With its cone shape and the protruding rubber seals, the bottle stopper provides the perfect fit for most any wine bottle.
- The Classic Chrome style is simple in design and that makes it compatible with many different styles and types of handles. It looks great with standard wooden turned handles, acrylic turned handles, metal turned handles or even handles that are not turned.
- CAUTION: Once you make one bottle stopper, it is highly likely that you will want to continue making more and more bottle stoppers. We as a company can not take any responsibility in regards to the addictive nature of this hobby. Please enjoy!
- See more on Amazon...
Brand: Savannah
Dimensions: 31.50 x 57.63 x 57.63 Inches
See On Amazon #8
Mixol Universal Tints, Blue, 09, 20 ml
Asin: B0036AYXR2 | Model: 4002926090208 | PartNumber: 4002926090208 | Ean: 4002926090208
Not Flammable Or Hazardous.
Won’T Dry Out Or Thicken So There Is A Very Long Shelf/Shop Life.
Highly Resistant To Heat Or Frost Damage.
Easy Soap And Water Cleanup.
Features
- Most concentrated, highest quality tints on the market today
- Easy soap and water cleanup
- Not flammable or hazardous
- Highly resistant to heat or frost damage
- Won t dry out or thicken so there is a very long shelf/shop life
- See more on Amazon...
Brand: Mixol | Manufacturer: Sepp Leaf Products, Inc.
Dimensions: 0.98 x 3.15 x 0.98 Inches | Weight: 0.07 pounds
See On Amazon #9
3 x 4 Micro-Mesh TM Sanding Pads 9 Grits
Asin: B0756MT6X8 | Model: 3 x 4 Soft Pads | PartNumber: 3 x 4 Soft Pads
The Pack Includes 9 Each 3 Inch By 4 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process..
Ideal For Use With Acrylics, Plastics, Resin Or Impregnated Blanks When Turning. Works Great On Automotive And Marine Body Work. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! Using The Step Up Process Will Leave Your Project Finish Looking Wonderful ..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .
- The pack includes 9 each 3 inch by 4 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work.
- Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface
Dimensions: 0.10 x 3.00 x 4.00 Inches | Weight: 4.00 ounces
See On Amazon #10
Peachtree Woodworking Supply 2 inch by 2 inch Micro-Mesh Soft Touch Sanding Pads w/ Galvanized Steel Dispenser - for Pen & Bottle Stopper Turning, Cycle Sanding Acrylic Materials (9 Micro Mesh Pads)
Asin: B07PTBBL9B | Model: VN-309-11554 | PartNumber: VN-309-11554 | Ean: 0817918022136 | UPC: 817918022136
Specifically Designed For The Micro-Mesh 2” X 2” 9 Pack Of Abrasives, This Dispenser Has Color Coded Grit Chart To Help Keep Your Pads In Order. This Works Wonderfully Well When Step Sanding Your Finished Turning Project. Simply Cycle Your Way Through The Grits By Pulling The Next Grit From The Dispenser And Placing The Used One Back On Top..
The Dispenser Measures 6” Tall, 3¼” Wide (At Base Tabs), 2-7/16” Wide (Actual Abrasive Holder) By 1½” Deep. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process. Package Comes With 9 Color Coded Micro Mesh Pads And 1 Each Galvanized Steel Dispenser..
The Dispenser Is Made From Corrosion Resistant Galvanized Steel Which Also Makes It Extra Durable For The Workshop Environment. It Can Be Mounted Flat Against A Wall Or It Can Be Mounted To A Table Top. Of Course You Don’T Have To Mount It At All..
When Using The Pads It Is Recommended That Start At The Lower Grit Of 1500 And Step Or Cycle Your Way Up To The High Grit Of 12000. The More You Get Into To Woodturning The More The Reality Of Being Organized Comes Into Play. This Couldn’T Be More True Than When It Comes To Our Abrasives. This Unique Dispenser Accepts 2” X 2” Micro-Mesh Abrasive Pads.
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro Mesh Soft Touch sanding pads! Starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it. This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional!
- When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000. The more you get into to woodturning the more the reality of being organized comes into play. This couldn t be more true than when it comes to our abrasives. This unique dispenser accepts 2 x 2 Micro-Mesh abrasive pads
- Specifically designed for the Micro-Mesh 2 x 2 9 pack of abrasives, this dispenser has color coded grit chart to help keep your pads in order. This works wonderfully well when step sanding your finished turning project. Simply cycle your way through the grits by pulling the next grit from the dispenser and placing the used one back on top.
- The dispenser is made from corrosion resistant galvanized steel which also makes it extra durable for the workshop environment. It can be mounted flat against a wall or it can be mounted to a table top. Of course you don t have to mount it at all.
- The dispenser measures 6 tall, 3 wide (at base tabs), 2-7/16 wide (actual abrasive holder) by 1 deep. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process. Package comes with 9 color coded micro mesh pads and 1 each galvanized steel dispenser.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply inc.
See On Amazon #11
Savannah Self Centering Pen and Bottle Stopper Drilling Vise Ideal For Wood Turners and Can Secure Wood Acrylic or Composite Materials
Asin: B06ZXTGY1B | Model: 7621 | PartNumber: 7621 | Ean: 0814310019856 | UPC: 814310019856
Vise Will Accept Blanks Up To 2-1/8" Diagonally Or Up To 1-1/2" Square..
The Solid Metal Construction Makes This Vise Perfect For Any Pen Turner..
The Self Centering Drill Press Vise Also Includes Three Sacrificial Mdf Plates To Slide Underneath The Blanks To Protect The Vise Base When Drilling Through Blank..
This Vise Can Also Be Used To Drill Both Stopper Blanks!.
Features
- This robust and uniquely designed Self Centering Pen Drilling Vise keeps your pen blanks secured. The jaws are parallel to one another and remain square to your drill press table to ensure accuracy. The jaws can open wide enough for wider bottle stopper blanks as well. The Savannah Self Centering Drill Press Vise also includes three sacrificial MDF Plates to slide underneath the blanks to protect the vise base when drilling through blank.
- This vise can also be used to drill Both Stopper Blanks!
- Vise will accept blanks up to 2-1/8 diagonally or up to 1-1/2 square.
- The Self Centering Drill Press Vise also includes three sacrificial MDF Plates to slide underneath the blanks to protect the vise base when drilling through blank.
- The solid metal construction makes this vise perfect for any pen turner.
- See more on Amazon...
Brand: Savannah | Manufacturer: Savannah
Dimensions: 4.25 x 11.25 x 4.00 Inches
See On Amazon #12
FASTCAP GLU-BOT Glue Bottle
Asin: B07HHKRMVT | Ean: 0663807982018 | UPC: 663807982018
Glue-Bot Sucks Glue Back Inside When You Stop Squeezing.
Also Available In 4Oz. Glu-Bot, Sold Separately.
Leaves A Clean, Clog Free Tip.
2 Chamber System Pushes Glue From The Bottom Through 2Nd Side Chamber.
Features
- Will not drip or spill
- 2 chamber system pushes glue from the bottom through 2nd side chamber
- Glue-bot sucks glue back inside when you stop squeezing
- Leaves a clean, clog free tip
- Also available in 4oz. Glu-bot, Sold separately
- See more on Amazon...
Brand: FastCap | Manufacturer: FastCap
See On Amazon #13
FASTCAP GLU-BOT GLUE BOTTLE (16OUNCES)
Asin: B001N1FR08 | Model: GB.GLUBOT | PartNumber: GB.GLUBOT | Ean: 0663807982018, 0600346739093 | UPC: 663807982018, 600346739093
Glue-Bot Sucks Glue Back Inside When You Stop Squeezing.
Also Available In 4Oz. Glu-Bot, Sold Separately.
Leaves A Clean, Clog Free Tip.
2 Chamber System Pushes Glue From The Bottom Through 2Nd Side Chamber.
Features
- Will not drip or spill
- 2 chamber system pushes glue from the bottom through 2nd side chamber
- Glue-bot sucks glue back inside when you stop squeezing
- Leaves a clean, clog free tip
- Also available in 4oz. Glu-bot, Sold separately
- See more on Amazon...
Brand: FastCap | Manufacturer: Fastcap Llc
Dimensions: 3.05 x 7.80 x 5.25 inches | Weight: 0.00 pounds
See On Amazon #14
Peachtree Woodworking Supply 1" x 8 tpi Bottle Stopper Chuck with Pilot Hole Drill Bit To Mount A Bottle Stopper Blank To Your Lathe Without A Jaw Chuck. For use with 3/8" x 16tpi Bottle Stoppers
Asin: B00J9UI0F4 | Model: P7228 | PartNumber: P7228 | Ean: 0814310014301 | UPC: 814310014301
After The Blank Is Drilled And With The Included Brad Point Drill Bit, The Blank Can Be Easily Threaded Onto The Chuck And Is Ready To Be Turned. As With All Items That Are Used With Power Tools Or Machinery, Please Follow All Instructions And Safety Precautions When Working On Your Project..
This Package Includes; 1 Each 1" X 8 Tpi Bottle Stopper Chuck And 1 Each Brad Point Drill Bit And 1 Each Full Step By Step Instruction Sheet. Wood, C/A Glue And Chrome Bottle Stopper Not Included..
This Size Chuck And Drill Bit Are One Of The Most Commonly Used Sizes For Turning Bottle Stopper Tops. Make Sure You Have The Right Size Bottle Stopper Threads Before Purchasing. Your Bottle Stopper Should Have A 3/8” X 16Tpi Threaded Stud And The Widest Part Of Your Bottle Stopper Should Be Approximately 31/32” In Diameter. The Finished Diameter Of Your Bottle Stopper Top May Vary Depending On Your Final Turned Size You Choose..
This Precision Machined Bottle Stopper Chuck Is Specifically Designed To Mount A Bottle Stopper Blank To Your Lathe. It Has A 3/8" X 16Tpi Threaded Stud Which Matches Most All Bottle Stoppers. The Bottle Stopper Chuck Threads Directly Onto Your 1” X 8 Tpi Lathe Headstock Spindle. This Small Compact Design Does Not Get In The Way Of Turning Compared To Larger Chucks..
Features
- Designed with the turner in mind. Thread your wooden blanks directly onto the chuck as opposed to using a bulky 4-jaw chuck. This method proves to be more cost effective and more efficient during the turning process. Many woodturners prefer turning their stopper blanks with this small, durable and compact design.
- This precision machined bottle stopper chuck is specifically designed to mount a bottle stopper blank to your lathe. It has a 3/8 x 16tpi threaded stud which matches most all bottle stoppers. The Bottle Stopper Chuck threads directly onto your 1 x 8 tpi lathe headstock spindle. This small compact design does not get in the way of turning compared to larger chucks.
- After the blank is drilled and with the included brad point drill bit, the blank can be easily threaded onto the chuck and is ready to be turned. As with all items that are used with power tools or machinery, please follow ALL instructions and safety precautions when working on your project.
- This size chuck and drill bit are one of the most commonly used sizes for turning bottle stopper tops. Make sure you have the right size bottle stopper threads before purchasing. Your bottle stopper should have a 3/8 x 16tpi threaded stud and the widest part of your bottle stopper should be approximately 31/32 in diameter. The finished diameter of your bottle stopper top may vary depending on your final turned size you choose.
- This package Includes; 1 each 1 x 8 tpi bottle stopper chuck and 1 each brad point drill bit and 1 each full step by step instruction sheet. Wood, C/A glue and chrome bottle stopper NOT included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 1.50 x 8.00 x 4.00 Inches
See On Amazon #15
Savannah Bottle Stopper Chuck (Standard 29/32" diameter)
Asin: B071Y4489Q | Ean: 0817918020019 | UPC: 817918020019
Available In Three Different But Common Smaller Sizes:.
Chuck Lathe Thread Size Is 1" X 8Tpi On All Three Chucks.
Micro, Mini And Standadrd.
Milled In Collar Makes Turning To Size Easier.
Features
- Ideal for turning smaller bottle stoppers
- Milled in collar makes turning to size easier
- Available in three different but common smaller sizes:
- Micro, Mini and Standadrd
- Chuck lathe thread size is 1 x 8tpi on all three chucks
- See more on Amazon...
Brand: Savannah | Manufacturer: Savannah
See On Amazon #16
Penn State Industries BSBUNDCS Bottle Stopper Kit Bundle with Blanks & Chuck Woodturning Project
Asin: B081QTQ42X | Model: BSBUNDCS | PartNumber: BSBUNDCS | Ean: 0810011933873 | UPC: 810011933873
You Will Receive (1) Of Each Of The Following Bottle Stopper Woodturning Project Kits: Classic In Chrome (Bs1), Vintage In Chrome (Bs8), Mini Stainless Steel (Bs10s), Round Stopper/Corkscrew Combo (Bs3), And Perfect Seal Adjustable (Bs9a).
Pkbsyst Consists Of (1) Of Each Of The Following Components: Bottle Stopper Chuck (Pk-Bs1-Mj) Pre-Threaded For A 1" X 8Tpi Spindle & A 3/8" X 16Tpi Tap Set And 5/16" Drill Bit (Bstapset2); Threaded Post On Both The Chuck And The Bottle Stopper Hardware Measures 3/8" X 16Tpi.
Wxpcwide Consists Of (1) Of Each Of The Following 2" X 2" X 2-3/8" Wood Blanks: Yucatan Rosewood, Bocote, Padauk, Bubinga, And Zebrawood.
Bsbundcs Includes (5) Bottle Stopper Woodturning Project Kits, (5) Bottle Stopper Wood Blanks (Wxpcwide), And (1) Bottle Stopper Chuck System (Pkbsyst).
Features
- This is a woodturning project kit. Hardware parts, wood blanks, chuck, drill bit, and tap set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED BOTTLE STOPPERS. All other turning tools and supplies are not included.
- BSBUNDCS includes (5) Bottle Stopper Woodturning Project Kits, (5) Bottle Stopper Wood Blanks (WXPCWIDE), and (1) Bottle Stopper Chuck System (PKBSYST)
- You will receive (1) of each of the following Bottle Stopper Woodturning Project Kits: Classic in Chrome (BS1), Vintage in Chrome (BS8), Mini Stainless Steel (BS10S), Round Stopper/Corkscrew Combo (BS3), and Perfect Seal Adjustable (BS9A)
- WXPCWIDE consists of (1) of each of the following 2 x 2 x 2-3/8 Wood Blanks: Yucatan Rosewood, Bocote, Padauk, Bubinga, and Zebrawood
- PKBSYST consists of (1) of each of the following components: Bottle Stopper Chuck (PK-BS1-MJ) pre-threaded for a 1 x 8tpi spindle & a 3/8 x 16tpi Tap Set and 5/16 Drill Bit (BSTAPSET2); Threaded Post on both the chuck and the bottle stopper hardware measures 3/8 x 16tpi
- See more on Amazon...
Brand: Penn State Industries | Manufacturer: Penn State Industries
See On Amazon #17
Savannah 3 piece Carbide Mini Turning Tool Set With Foam Lined Case Perfect For Turning Pens Pencils Tops Goblets Acorns Bottle Stoppers or any Small to Mid-Size Turning Project (3pc)
Asin: B01FWEX6OA | Model: 7382 | PartNumber: 7382 | Ean: 0814310017166 | UPC: 814310017166
Unlike Standard Tools, When Using Carbide Tipped Cutter Such As These, You Keep The Cutter Straight In On The Turning Which Produces A Shearing Action. This Produces Much Cleaner Cuts And Tends To Be Easier Then Using Standard Turning Tools.
Overall Length Approximately 13-1/8, Handle Length Approximately 9 1/8, Tool Shaft Approximately 4". Set Includes: All 3 Tools And Black Storage Case.
The Handles Each Have Molded Grips That Provide Better Grip And Less Fatigue After Extended Periods Of Use. Over All Length: Approximately 13-1/8" Handle Length: Approximately 9-1/8" Tool Shaft: Approximately 4" Set Includes: 1 Ea. Mini Turning Tool With Square Carbide Tip 1 Ea. Mini Turning Tool With Round Carbide Tip 1 Ea. Mini Turning Tool With Diamond Carbide Tip Note: Tips Can Be Replaced With Easy Wood Carbide Tips..
When The Tool Dulls, Simply Rotate The Tip For A Fresh, Clean Cutting Edge. The Carbide Tips Will Stay Sharper Longer Compared To Standard Turning Tools As Well. The Tips Are Replaceable When Needed (Extra Tips Are Sold Separately)..
Features
- Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning the results can be more than undesirable. With the Savannah Carbide Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and hold the tool in position to cut clean and smoothly.
- When the tool dulls, simply rotate the tip for a fresh, clean cutting edge. The carbide tips will stay sharper longer compared to standard turning tools as well. The tips are replaceable when needed (extra tips are sold separately).
- Unlike standard tools, when using carbide tipped cutter such as these, you keep the cutter straight in on the turning which produces a shearing action. This produces much cleaner cuts and tends to be easier then using standard turning tools
- The handles each have molded grips that provide better grip and less fatigue after extended periods of use. Over all Length: Approximately 13-1/8 Handle Length: Approximately 9-1/8 Tool Shaft: Approximately 4 Set Includes: 1 ea. Mini Turning Tool with Square Carbide Tip 1 ea. Mini Turning Tool with Round Carbide Tip 1 ea. Mini Turning Tool with Diamond Carbide Tip Note: Tips can be replaced with Easy Wood Carbide Tips.
- Overall Length Approximately 13-1/8, Handle Length Approximately 9 1/8, Tool Shaft Approximately 4. Set Includes: All 3 tools and Black Storage Case
- See more on Amazon...
Brand: Savannah | Manufacturer: Savannah
Dimensions: 4.00 x 15.00 x 11.00 Inches | Weight: 3.10 pounds
See On Amazon #18
Trend Complete Credit Card Diamond Sharpening Kit with 180/300 & 600/1000 Grit Stones, Lapping Fluid, Non-Slip Mat, Cleaning Block & Sharpening Guide, DWS/KIT/D
Asin: B0714BHBZ7 | Model: U*DWS/KIT/D | PartNumber: U*DWS/KIT/D | Ean: 5027654055304
Trend Lapping Fluid: Our Included Lapping Fluid Reduces The Threat Of Rusting By 95%. Use Minimal Amounts To Improve The Performance Of Your Diamond Abrasive Whetstones..
Sharpening Solutions: With Helpful Expert Advice, Hints And Tips, The Sharpening Solutions Guide Is The Perfect Introduction To Sharpening And Helps You Get The Most From Your Kit..
Essential Accessories: The Non-Slip Mat Helps Keep The Credit Card Stone In Place While Sharpening And The Cleaning Block Helps Maintain And Extend The Life Of The Whetstone..
Sharpen Your Tools: Ideal For Sharpening And Honing A Wide Range Of Tools Including Knives, Chisels, Gouges, Scrapers, Router Bits, Sawblades And More Hss Cutting Blades Or Tools..
Features
- COMPLETE KIT INCLUDES: Credit Card 180/300 Grit & 600/1000 Grit Diamond Stones, Lapping Fluid, Non-Slip Mat & Cleaning Block. Plus, a Diamond Sharpening Solutions Guide.
- SHARPEN YOUR TOOLS: Ideal for sharpening and honing a wide range of tools including knives, chisels, gouges, scrapers, router bits, sawblades and more HSS cutting blades or tools.
- TREND LAPPING FLUID: Our included lapping fluid reduces the threat of rusting by 95%. Use minimal amounts to improve the performance of your diamond abrasive whetstones.
- ESSENTIAL ACCESSORIES: The non-slip mat helps keep the credit card stone in place while sharpening and the cleaning block helps maintain and extend the life of the whetstone.
- SHARPENING SOLUTIONS: With helpful expert advice, hints and tips, the Sharpening Solutions Guide is the perfect introduction to sharpening and helps you get the most from your kit.
- See more on Amazon...
Brand: TREND | Manufacturer: TREND
Dimensions: 2.00 x 9.00 x 6.00 Inches
Warranty: 5 years
See On Amazon #19
Savannah Classic Chrome Style Bottle Stopper with 3/8" x 16 tpi Threaded Post For Attaching Hand Made or Lathe Turned Handles (5 Chrome Stoppers)
Asin: B07N87BCVX | Ean: 0817918021993 | UPC: 817918021993
The Stopper Measures Approximately 3¼” In Total Length And Is Approx. 57/64” In Diameter At The Top Or Widest End Of The Bottle Stopper. With Its Cone Shape And The Protruding Rubber Seals, The Bottle Stopper Provides The Perfect Fit For Most Any Wine Bottle..
Caution: Once You Make One Bottle Stopper, It Is Highly Likely That You Will Want To Continue Making More And More Bottle Stoppers. We As A Company Can Not Take Any Responsibility In Regards To The Addictive Nature Of This Hobby. Please Enjoy!.
The Classic Chrome Style Is Simple In Design And That Makes It Compatible With Many Different Styles And Types Of Handles. It Looks Great With Standard Wooden Turned Handles, Acrylic Turned Handles, Metal Turned Handles Or Even Handles That Are Not Turned..
With A 3/8” X 16 Tpi (Threads Per Inch) Stud On The Top Side Of The Stopper, You Can Attach The Stopper To Most Anything With A Matching Thread Size. You Can Tap A Threaded Hole Directly Into Your Stock Or You Can Use A Threaded Insert (Sold Separately) That Would Be Embedded Into Your Stock Piece. Most Woodturners Prefer To Use An Insert Since It Is More Stable Over Time And Provides A Secure Fit That Will Last..
Features
- Add some curb appeal to your wine bottles by creating your very own bottle stopper! The Classic Chrome Bottle Stopper is sure to turn heads once you have mounted your very own and unique handle or topper. From hand made handles or toppers to lathe turned bottle stoppers, your only limitation is your imagination!
- With a 3/8 x 16 tpi (threads per inch) stud on the top side of the stopper, you can attach the stopper to most anything with a matching thread size. You can tap a threaded hole directly into your stock or you can use a threaded insert (sold separately) that would be embedded into your stock piece. Most woodturners prefer to use an insert since it is more stable over time and provides a secure fit that will last.
- The stopper measures approximately 3 in total length and is approx. 57/64 in diameter at the top or widest end of the bottle stopper. With its cone shape and the protruding rubber seals, the bottle stopper provides the perfect fit for most any wine bottle.
- The Classic Chrome style is simple in design and that makes it compatible with many different styles and types of handles. It looks great with standard wooden turned handles, acrylic turned handles, metal turned handles or even handles that are not turned.
- CAUTION: Once you make one bottle stopper, it is highly likely that you will want to continue making more and more bottle stoppers. We as a company can not take any responsibility in regards to the addictive nature of this hobby. Please enjoy!
- See more on Amazon...
Brand: Savannah
Dimensions: 31.50 x 57.63 x 57.63 Inches
See On Amazon
Looking For Something Else?
Search