Flying Horse 48cc/66cc/80cc 2-Stroke Motorized Bicycle Engine Clutch Base Gas Bike Clutch Base Replacement
Asin: B00KO5VUXM
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Note: This Is Only The Base Of The Bevel Wheel Assembly. For A Complete Assembly You'll Need Clutch Pads, The Bevel Gear, And The Bevel Gear's Bearings.
This Clutch Base Is The Base Of The Clutch Bevel Wheel Assembly. To Install You'll Need To Pry The Existing Bevel Wheel Assembly And Then Press This One In To The Case.
Features
- The Clutch Base is made for 2-stroke 66/80cc bicycle engine kits, including the Flying Horse, Grubee Skyhawk, and Power King motors
- This clutch base is the base of the clutch bevel wheel assembly. To install you'll need to pry the existing bevel wheel assembly and then press this one in to the case
- Note: this is only the base of the bevel wheel assembly. For a complete assembly you'll need clutch pads, the bevel gear, and the bevel gear's bearings
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon Similar To Flying Horse 48cc 66cc 80cc
#1
FVRITO High Performance Exhaust Muffler Heat Shield Tap Gasket Kit for 2 Stroke 80cc 66cc 60cc 49cc 100cc Engine Gas Motorized Bicycle Motor Bike Parts Silver
Asin: B0CHDT8H9S | Model: Long Exhaust | PartNumber: Long Exhaust
【Easy Installation】: The Package Comes With Everything You Need. Including The Long Exhuast, A 40Mm High Performance Muffler Gasket And Mounting Brackets And Hardware To Securely Fasten Your Exhaust Pipe. Featuring An Optimized Angled Design For Easy Installation And Better Fit..
【Note】: Replacement For Original Part. Please Check Parts To See If It Fits Your Model..
【Package Contents:】1 Set Muffler Exhaust Pipe With Heat Shield Tape,Extra Hardware..
【Fitment】：The Exhaust With 40Mm Mounting Stud Spacing Fit For Most 48Cc, 60Cc, 66Cc And 80Cc 100Cc 2-Stroke Engine Gas Motorized Bicycle Motor Bikes Such As Flying Horse, Grubee, Skyhawk..
Features
- High Performance : The long exhaust could offer 2-stroke bicycle motor or racing engine the power it needs to run at optimal performance.Designed to run alongside the engine and out towards the back of your bike. The tuned chamber utilizes the exhaust's length to expel exhaust faster and more efficient resulting in increased torque and higher top speeds. Heat Shield Tape and anti scalding metal plate provide dual protection to avoid burns caused by excessive temperature.
- Fitment The exhaust with 40mm mounting stud spacing fit for most 48cc, 60cc, 66cc and 80cc 100cc 2-stroke engine gas motorized bicycle Motor Bikes such as Flying Horse, Grubee, Skyhawk.
- Easy Installation : The package comes with everything you need. Including the long exhuast, a 40mm high performance muffler gasket and mounting brackets and hardware to securely fasten your exhaust pipe. Featuring an optimized angled design for easy installation and better fit.
- Package Contents: 1 set Muffler Exhaust Pipe with Heat Shield Tape,extra hardware.
- Note : Replacement for original part. Please check parts to see if it fits your model.
- See more on Amazon...
Brand: FVRITO | Manufacturer: FVRITO
Warranty: 3 months
See On Amazon #2
Vitta Fuel Line
Asin: B00KWLKSAO
Note: If You're Using A Fuel Filter You Will Need To Install It In The Center Of The Fuel Line, Which Will Require You To Cut The Fuel Line In Half.
Installation Is A Breeze: Simply Slide One End Of The Fuel Line Over The Fuel Valve Filter And The Other To The Gas Jet Valve On Your Carburetor. If Needed, Use Hose Clamps To Tie The Fuel Line Down To The Jet, And You're Ready To Ride.
Features
- The Vitta Fuel Line helps deliver fuel from the gas tank to the carburetor of any 2-stroke or 4-stroke 48cc, 49cc, or 66/80cc motorized bicycle engine
- Installation is a breeze: simply slide one end of the fuel line over the fuel valve filter and the other to the gas jet valve on your carburetor. If needed, use hose clamps to tie the fuel line down to the jet, and you're ready to ride
- Note: If you're using a fuel filter you will need to install it in the center of the fuel line, which will require you to cut the fuel line in half
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #3
High Performance Three Prong Spark Plug
Asin: B00KWLKVSI
Easy Installation: Installation Is A Breeze, Just Remove Your Old Spark Plug And Drop In Your New High Performance Three Prong Plug And Your Good To Go. No Tuning Necessary!.
Package Includes: 1X Flying Horse 2-Stroke Motorized Bicycle High Performance Three Prong Spark Plug.
Universal Fit: This Spark Plug Is Designed To Work With 2 Stroke 48Cc, 60Cc, 66Cc And 80Cc Bicycle Engine Kit Motors..
Reliable Spark: Not Only Do These Spark Plugs Increase Torque And Speed But It Also Helps Start Your Engine. With A Larger Spark, It Helps Assist Cold Engines Start Up Faster..
Features
- BOOST PERFORMANCE: The Flying Horse High Performance two stroke Three Prong Spark plug has three electrode grounds providing 3x the spark of a traditional single prong spark plug. The produces a stronger spark which helps the engine run more efficiently utilizing more of the fuel in the combustion chamber. This helps keep your engine clean of unburnt fuel and can extend the life of your engine.
- RELIABLE SPARK: Not only do these spark plugs increase torque and speed but it also helps start your engine. With a larger spark, it helps assist cold engines start up faster.
- EASY INSTALLATION: Installation is a breeze, just remove your old spark plug and drop in your new high performance three prong plug and your good to go. No tuning necessary!
- UNIVERSAL FIT: This spark plug is designed to work with 2 stroke 48cc, 60cc, 66cc and 80cc bicycle engine kit motors.
- PACKAGE INCLUDES: 1x Flying Horse 2-Stroke Motorized Bicycle High Performance Three Prong Spark Plug
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #4
Flying Horse 2-Stroke Motorized Bicycle Clutch Lever Gas Bike Clutch Handle Replacement
Asin: B00KO5VI98
Easy Installation: Installation Is A Breeze: Install The Beaded End Of Your Clutch Cable In To The Lever Arm. Mount The Lever To Your Handlebars And Adjust Your Clutch Cable Tension As Needed- Now You're Ready To Ride.
Package Includes: 1X Flying Horse 2-Stroke Bicycle Clutch Clever. Color & Appearance May Vary.
Universal Fit: Designed To Work With Most Standard 48Cc, 60Cc, 66Cc And 80Cc 2 Stroke Motorized Bike Engines..
Spring Loaded Lock: This Clutch Lever Features A Spring Loaded Button That Will Lock Your Clutch Lever In The Disengaged Position. That Way When You Choose To Ride Your Bike With Out The Engine You No Longer Have To Hold The Clutch Lever Pulled In.
Features
- DIRECT REPLACEMENT: The Flying Horse Motorized Bicycle Clutch Handle is used on most standard two stroke motorized bicycle engine kits and is used to engage and disengage your engine.
- SPRING LOADED LOCK: This clutch lever features a spring loaded button that will lock your clutch lever in the disengaged position. That way when you choose to ride your bike with out the engine you no longer have to hold the clutch lever pulled in
- EASY INSTALLATION: Installation is a breeze: install the beaded end of your clutch cable in to the lever arm. Mount the lever to your handlebars and adjust your clutch cable tension as needed- now you're ready to ride
- UNIVERSAL FIT: Designed to work with most standard 48cc, 60cc, 66cc and 80cc 2 stroke motorized bike engines.
- PACKAGE INCLUDES: 1x Flying Horse 2-Stroke Bicycle Clutch Clever. Color & Appearance May Vary
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
Weight: 0.25 Pounds
See On Amazon #5
BBR Tuning High Performance F2 Thrust Exhaust Muffler- Black
Asin: B01N5T44RW | Ean: 0755429762434 | UPC: 755429762434
Universal Fit: With 40Mm Mounting Stud Spacing This Exhaust Is Designed To Work With Most 48Cc, 60Cc, 66Cc And 80Cc 2-Stroke Bicycle Engine Kits And Brands Such As Flying Horse, Grubee, Skyhawk And Bbr Tuning..
Industry Leading Warranty: Backed By An Industry Leading 1 Month Manufacture Warranty And Lifetime Support The Bbr Tuning Thrust F2 Comes With The Industries Best Support And A Satisfaction Guarantee.
Easy Installation: This Comes With Everything You Need To Make Your Install A Breeze. It Includes The F2 Thrust Muffler, A 40Mm High Performance Muffler Gasket And Mounting Brackets And Hardware To Securely Fasten Your Muffler..
Improves Engine Sound: You Won't Find Any Baffle Hinder The Performance In This Muffler. It's A Straight Pipe With A Medium Expansion Chamber Resulting In A Deep Aggressive Sound We All Want From Out Motorized Bike..
Features
- BOOSTS PERFORMANCE: The BBR Tuning F2 Thrust exhaust is designed to give your stock 2-stroke bicycle motor or racing engine the power it needs to run at optimal performance. It's a long exhaust designed to run alongside the engine and out towards the back of your bike. It's tuned chamber utilizes the length of the exhaust to expel exhaust faster and more efficient resulting in increased torque and higher top speeds.
- IMPROVES ENGINE SOUND: You won't find any baffle hinder the performance in this muffler. It's a straight pipe with a medium expansion chamber resulting in a deep aggressive sound we all want from out motorized bike.
- UNIVERSAL FIT: With 40mm mounting stud spacing this exhaust is designed to work with most 48cc, 60cc, 66cc and 80cc 2-stroke bicycle engine kits and brands such as Flying Horse, Grubee, Skyhawk and BBR Tuning.
- EASY INSTALLATION: This comes with everything you need to make your install a breeze. It includes the F2 Thrust Muffler, a 40mm high performance muffler gasket and mounting brackets and hardware to securely fasten your muffler.
- INDUSTRY LEADING WARRANTY: Backed by an industry leading 1 month manufacture warranty and lifetime support the BBR Tuning Thrust F2 comes with the industries best support and a satisfaction guarantee
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #6
High Performance CDI Spark Plug Wire
Asin: B00Q4HHCW2
Easy Installation: Installation Is A Breeze, Just Unscrew Your Spark Plug Cap And Cdi From Your Stock Wire. Then Thread Your Cap And Cdi On To Your New Flying Horse High Performance Cdi Spark Plug Wire.
Package Includes: 1X Flying Horse High Performance Cdi Spark Plug Wire.
Universal Fit: Designed To Work With Most Standard 48Cc, 60Cc, 66Cc And 80Cc Bicycle Engines..
Increases Reliability: No More Rough Starts Or Inconsistent Spark, This Wire Is A Direct Replacement For Your Stock Wire And Will Drastically Increase Your Engines Spark..
Features
- BOOSTS PERFORMANCE: The Flying Horse High Performance Spark Plug Wire will lessen the resistance of your CDI which reduces energy loss between your ignition coil and spark plug which results in a better spark and a better running engine. With a better spark your engine will run smoother and more efficiently.
- INCREASES RELIABILITY: No more rough starts or inconsistent spark, this wire is a direct replacement for your stock wire and will drastically increase your engines spark.
- EASY INSTALLATION: Installation is a breeze, just unscrew your spark plug cap and CDI from your stock wire. Then thread your cap and CDI on to your new Flying Horse High Performance CDI Spark Plug Wire
- UNIVERSAL FIT: Designed to work with most standard 48cc, 60cc, 66cc and 80cc bicycle engines.
- PACKAGE INCLUDES: 1x Flying Horse High Performance CDI Spark Plug Wire
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #7
Flying Horse 2-Stroke Motorized Bicycle Complete Clutch Bevel Wheel Assembly Gas Bike Complete Clutch Replacement
Asin: B00KO5VVQS
Easy Installation: Installation Is A Breeze, Just Remove Your Existing Clutch Bevel Gear And Bold On Your New Clutch Bevel Wheel Assembly. It's That Simple!.
Package Includes: 1X Complete Clutch Bevel Wheel Assembly.
Universal Fit: Designed To Fit Most Standard 48Cc, 60Cc, 66Cc And 80Cc 2 Stroke Motorized Bike Engines..
Pre Assembled: This Clutch Comes Pre-Assembled With The Clutch Pads, Bearings, Pintles And Clutch Base Already Installed. No More Packing The Bearings In Your Clutch..
Features
- DIRECT REPLACMENT: The Flying Horse Complete Clutch Bevel Wheel Assembly is a direct replacement for 48cc and 66/80cc two stroke motorized bikes.
- PRE ASSEMBLED: This clutch comes pre-assembled with the clutch pads, bearings, pintles and clutch base already installed. No more packing the bearings in your clutch.
- EASY INSTALLATION: Installation is a breeze, just remove your existing clutch bevel gear and bold on your new clutch bevel wheel assembly. It's that simple!
- UNIVERSAL FIT: Designed to fit most standard 48cc, 60cc, 66cc and 80cc 2 stroke motorized bike engines.
- PACKAGE INCLUDES: 1x Complete clutch bevel wheel assembly
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
Weight: 1.09 pounds
See On Amazon #8
BBR Tuning Complete 20 Piece Heavy Duty Engine Kit Stud Set (6mm)
Asin: B00VN3TUDQ | Model: BBR-HDSTUDSET | PartNumber: BBR-HDSTUDSET
Easy Installation: Installation Is A Breeze, Just Replace Each Bolt And Stud With The Correct One Supplied In Your New Bbr Tuning Heavy Duty Stud Set.
Package Includes: 4X Motor Head Studs W/ Washers & Lock Washers, 4X Motor Mount Studs (2X Rear, 2X Front) W/ Nuts, Washers, And Lock Washers, 3X Drive Sprocket Case Screws, 5X Gear Case Cover Screws, 4X Magneto Case Cover Screw.
Universal Fit: These Bolts Are Designed To Work With Most Standard 48Cc, 60Cc, 66Cc And 80Cc Two Stroke Motorized Bicycle Engine Kits.
Complete Kit: Full 20 Piece Kit- Most Kits On The Market Are 12-16 Bolts Only. Complete Bolt Kit Including Motor Studs.
Features
- NO MORE STIPPED SCREWS: The BBR Tuning Twenty Piece Stud Set replaces all the phillips screws and studs that are prone to stripping and braking on your two stroke bike engine with heavy duty hex studs. These bolts will allow you to properly tighten them without wearing out or getting stuck in your engine.
- COMPLETE KIT: Full 20 piece kit- most kits on the market are 12-16 bolts only. Complete bolt kit INCLUDING motor studs
- EASY INSTALLATION: Installation is a breeze, just replace each bolt and stud with the correct one supplied in your new BBR Tuning Heavy Duty Stud Set
- UNIVERSAL FIT: These bolts are designed to work with most standard 48cc, 60cc, 66cc and 80cc two stroke motorized bicycle engine kits
- PACKAGE INCLUDES: 4x Motor Head Studs w/ washers & lock washers, 4x Motor Mount Studs (2x rear, 2x front) w/ nuts, washers, and lock washers, 3x Drive Sprocket Case Screws, 5x Gear Case Cover Screws, 4x Magneto Case Cover Screw
- See more on Amazon...
Brand: Flying Horse | Manufacturer: BBR Tuning
See On Amazon #9
BBR Tuning Torquer Up Exhaust Pipe Muffler
Asin: B00LNGHHEM
Easy Installation: Just Unbolt And Remove Your Existing Exhaust And Bolt On Your New Bbr Tuning Torquer Up Exhaust. Note* Due To The Length Of This Muffler You Will Need To Use Brackets In Order To Keep The Muffler Mounted And Supported Properly.
Included Components: 1X Bbr Tuning Torquer Up Expansion Chamber Exhaust With Muffler.
Universal Fit: This 2-Stroke Exhaust Is Designed To Work With Any 40Mm Stud Spacing Exhaust Port Common On Motorized Bicycles Such As 48Cc, 60Cc, 66Cc And 80Cc..
Sleek Design: This Exhaust Is A Long Shot Muffler That Extends Towards The Back Of The Bike. It's Designed To Keep Your Bike Looking Great With It's Stylish Fit..
Features
- BOOSTS PERFORMANCE: The BBR Tuning Torquer Up Exhaust features an expansion chamber that drastically improves performance over stock. This provides an increase in low to mid torque while increasing top speed. Since this exhaust features a muffler on the end you can expect the same quietness of stock but with a more deep sound all riders are looking for.
- SLEEK DESIGN: This exhaust is a long shot muffler that extends towards the back of the bike. It's designed to keep your bike looking great with it's stylish fit.
- EASY INSTALLATION: Just unbolt and remove your existing exhaust and bolt on your new BBR Tuning Torquer Up Exhaust. NOTE* Due to the length of this muffler you will need to use brackets in order to keep the muffler mounted and supported properly
- UNIVERSAL FIT: This 2-Stroke exhaust is designed to work with any 40mm stud spacing exhaust port common on motorized bicycles such as 48cc, 60cc, 66cc and 80cc.
- INCLUDED COMPONENTS: 1x BBR Tuning Torquer Up Expansion Chamber Exhaust with Muffler
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #10
CDI Electron Ignition Coil
Asin: B00KWLLIZI | Model: FH-CDI-2S | PartNumber: FH-CDI-2S
Easy Installation:Installation Is A Breeze: Start By Installing The Spark Plug Cap On To The Spark Plug. Then Wire The Cdi To Your Magneto And Kill Switch In The Same Manner You Had Them Prior To Replacing The Cdi (This May Require Looking At Your Original Installer's Guide). Mount The Brackets And The Cdi Around The Top Bar Above The Engine And You're Ready To Ride.
Package Includes: 1X Flying Horse Cdi Ignition Coil.
Universal Fit: Designed To Work With Most Standard 48Cc, 60Cc, 66Cc And 80Cc Two Stroke Motorized Bike Engines.
Reliable Performance: This Cdi Was Designed To Keep Your Keep Your Bike On The Road, Its Reliable And Heavy Duty Design Will Make Sure Your Engine Sparks Every Time.
Features
- DIRECT REPLACEMENT: The CDI Electron Ignition Coil helps provide spark to the spark plug of most 2-stroke 48cc and 66/80cc bicycle engine kits
- RELIABLE PERFORMANCE: This CDI was designed to keep your keep your bike on the road, its reliable and heavy duty design will make sure your engine sparks every time
- EASY INSTALLATION:Installation is a breeze: start by installing the spark plug cap on to the spark plug. Then wire the CDI to your magneto and kill switch in the same manner you had them prior to replacing the CDI (this may require looking at your original installer's guide). Mount the brackets and the CDI around the top bar above the engine and you're ready to ride
- UNIVERSAL FIT: Designed to work with most standard 48cc, 60cc, 66cc and 80cc two stroke motorized bike engines
- PACKAGE INCLUDES: 1x Flying Horse CDI Ignition Coil
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #11
66/80cc 2-Stroke Dual Window Piston #1 for Bicycle Engine Kits- Flying Horse, ZEDA, Grubee, and More
Asin: B07LCXNZ4M | Ean: 0799789987359 | UPC: 799789987359
With The Dual Windowed Design, This Piston Allows You To Recapture This Intake Flow Loss And Run More Efficiently..
This Piston Is 40Mm Diameter, 45Mm Height. Piston Rings Not Included.
The Windowed Design Also Decreases Degradation In Bike Engine Kit Parts.
The Windowed Design Allows For Better Lubrication To The Wrist Pin, Allowing A Smoother Ride..
Features
- This 66/80cc 2-Stroke Dual Window Piston is the perfect upgrade for your 2-stroke bicycle engine!
- The windowed design allows for better lubrication to the wrist pin, allowing a smoother ride.
- With the dual windowed design, this piston allows you to recapture this intake flow loss and run more efficiently.
- The windowed design also decreases degradation in bike engine kit parts
- This piston is 40mm Diameter, 45mm Height. Piston Rings NOT included
- See more on Amazon...
Brand: BBR Tuning | Manufacturer: BBR Tuning
See On Amazon #12
Flying Horse 48cc/66cc/80cc 2-Stroke Motorized Bicycle Engine Clutch Bevel Gear Gas Bike Large Clutch Gear Replacement
Asin: B00KO5VY0G
Package Includes Clutch Bevel Gear Only- Clutch Base And Clutch Pads Sold Separately.
This Is Part #9 On The 2-Stroke Clutch Diagram.
This Gear Is To Be Pressed On To The Clutch Base, Then The Clutch Pads Pressed In To Their Available Slots.
Features
- The clutch bevel gear is the gear that sits right behind the small bevel gear to help engage the engine
- This gear is to be pressed on to the clutch base, then the clutch pads pressed in to their available slots
- Package includes clutch bevel gear only- clutch base and clutch pads sold separately
- This is part #9 on the 2-Stroke clutch diagram
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #13
Flying Horse 2-Stroke Motorized Bicycle Chrome Magneto Case Cover Replacement Gas Bike Electrical Magneto Case Cover Upgrade
Asin: B00Q4HHISK
Easy Installation: Installation Is A Breeze, Just Unbolt And Remove Your Stock Magneto Case Cover And Bolt On Your New Flying Horse Chrome Magneto Case Cover And You're Good To Go. It's That Simple!.
Package Includes: 1X Flying Horse Motorized Bicycle Chrome Magneto Case Cover.
Universal Fit: Designed To Fit Most Standard 48Cc, 60Cc, 66Cc And 80Cc 2 Stroke Motorized Bicycle Engine Kits..
Increaed Protection: This Side Cover Helps Protect Your Engines Magneto Loop Set And It's Magnet..
Features
- STYLISH DESIGN: The Flying Horse Two Stroke Chrome Magneto Case Cover is perfect for those looking to add a little flash their motorized bike. Tired of those stock flat covers, these covers are bright and shiny chrome and will make any motorized bike look great.
- INCREAED PROTECTION: This side cover helps protect your engines magneto loop set and it's magnet.
- EASY INSTALLATION: Installation is a breeze, just unbolt and remove your stock Magneto case cover and bolt on your new Flying Horse Chrome Magneto case cover and you're good to go. It's that simple!
- UNIVERSAL FIT: Designed to fit most standard 48cc, 60cc, 66cc and 80cc 2 stroke motorized bicycle engine kits.
- PACKAGE INCLUDES: 1x Flying Horse Motorized Bicycle Chrome Magneto Case Cover
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #14
Flying Horse 2-Stroke Motorized Bicycle Chrome Drive Sprocket Case Cover Replacement Gas Bike 10 Tooth Drive Sprocket Case Cover Upgrade
Asin: B00KWLLPAQ
Easy Installation: Installation Is A Breeze, Just Unbolt And Remove Your Stock Drive Sprocket Case Cover And Bolt On Your New Flying Horse Chrome Drive Sprocket Case Cover And You're Good To Go. It's That Simple!.
Package Includes: 1X Flying Horse Motorized Bicycle Chrome Drive Sprocket Case Cover.
Universal Fit: Designed To Fit Most Standard 48Cc, 60Cc, 66Cc And 80Cc 2 Stroke Motorized Bicycle Engine Kits..
Increaed Protection: This Side Cover Helps Protect Your Engines Drive Sprocket, Chain As Well As Your Clutch Components Including The Bucking Bar And Crank Case..
Features
- STYLISH DESIGN: The Flying Horse Two Stroke Chrome Drive Sprocket Case Cover is perfect for those looking to add a little flash their motorized bike. Tired of those stock flat covers, these covers are bright and shiny chrome and will make any motorized bike look great.
- INCREAED PROTECTION: This side cover helps protect your engines drive sprocket, chain as well as your clutch components including the bucking bar and crank case.
- EASY INSTALLATION: Installation is a breeze, just unbolt and remove your stock drive sprocket case cover and bolt on your new Flying Horse Chrome Drive Sprocket case cover and you're good to go. It's that simple!
- UNIVERSAL FIT: Designed to fit most standard 48cc, 60cc, 66cc and 80cc 2 stroke motorized bicycle engine kits.
- PACKAGE INCLUDES: 1x Flying Horse Motorized Bicycle Chrome Drive Sprocket Case Cover
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #15
Clutch Wire Clip
Asin: B00KO5VUA0
Installation Is A Breeze: Once The Clutch Cable And Its Springs Are Installed, Slide The Clutch Wire Clip Over The Excess Cable To The Desired Tension, Fasten The Locking Screw On To The Clutch Cable, And You're Ready To Ride.
Features
- The Clutch Wire Clip helps keep the proper tension on the clutch cable for your 2-stroke 48cc or 66/80cc motorized bike engine
- Installation is a breeze: once the clutch cable and its springs are installed, slide the clutch wire clip over the excess cable to the desired tension, fasten the locking screw on to the clutch cable, and you're ready to ride
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #16
Pull Start Assembly
Asin: B00KO5VO4M | Model: FBA_FH-PSASS | PartNumber: FBA_FH-PSASS
Easy Installation: Installation Is A Breeze, Just Unbolt And Remove Your Magneto Case Cover. Bolt On The Magneto Magnet Mount And Attach The Pull Start To The Side Of Your Engine. It's That Easy!.
Package Includes: 1X Flying Horse Pull Start Assembly, 1X Magneto Magnet Cover Plate.
Universal Fit: Designed To Fit Most Standard Two Stroke 48Cc, 60Cc, 66Cc And 80Cc Motorized Bicycle Engine Kits. **Note: In Some Cases Wide Pedal Crank Assemblies Are Required To Clear The Pull Start On Narrow Bikes..
Heavy Duty: This Pull Start Is Heavy Duty And Designed To Last. It Features A Metal Construction So That It Can With Stand Many Starts..
Features
- PEDAL FREE STARTING: With the Flying Horse 2 stroke Bicycle Engine Pull Start assembly jump starting your bike is a thing of the past. Just pull in your clutch and pull the rope to start your engine with ease. Perfect for those builds that no longer have pedals or bikes that are difficult to pedal.
- HEAVY DUTY: This pull start is heavy duty and designed to last. It features a metal construction so that it can with stand many starts.
- EASY INSTALLATION: Installation is a breeze, just unbolt and remove your magneto case cover. Bolt on the magneto magnet mount and attach the pull start to the side of your engine. It's that easy!
- UNIVERSAL FIT: Designed to fit most standard two stroke 48cc, 60cc, 66cc and 80cc motorized bicycle engine kits. **NOTE: In some cases wide pedal crank assemblies are required to clear the pull start on narrow bikes.
- PACKAGE INCLUDES: 1x Flying Horse Pull Start Assembly, 1x Magneto Magnet Cover Plate
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #17
Flying Horse 48cc/66cc/80cc 2-Stroke Intake Manifold Gasket Gas Bike Intake Gasket Replacement (30mm)
Asin: B0116AN5T0
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon #18
Flying Horse 66cc/80cc 2-Stroke Motorized Bicycle Engine Chrome Cylinder Body Cap Gas Bike Cylinder Head
Asin: B00KWLKX4K
Chrome Finish; 6Mm Head Studs; Torque: 9-12 Lb/Ft.
To Install Simply Unbolt The Existing Studs, Lift Off The Cap, Replace The Head Gasket (If Necessary), Torque Down The Head, And You're Ready To Run.
Features
- The 80cc Angle Fire Cylinder Body Cap is an angle fire head cap made for 66/80cc 2-stroke bicycle engine kits
- To install simply unbolt the existing studs, lift off the cap, replace the head gasket (if necessary), torque down the head, and you're ready to run
- Chrome finish; 6mm Head Studs; Torque: 9-12 lb/ft
- See more on Amazon...
Brand: Flying Horse | Manufacturer: Flying Horse
See On Amazon
Looking For Something Else?
Search