TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas (Gray, Quart), 32 Fl Oz (Pack of 1)
Asin: B00LLH4UYI | Model: 409318 | PartNumber: 409318 | Ean: 0811932021168, 0811932020963 | UPC: 811932020963, 811932021168
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Use: Apply 1-2 Coats By Brushing, Rolling Or Spraying On Prepared Fiberglass, Wood And Metal; Prime Prepared Metals With Totalboat Totalprotect; For Fiberglass Prime With Totalprotect If Desired; For Wood Use Totalboat Topside Primer If Desired.
Choose Color And Size: Available In White And Gray Colors, In Quart And Gallon Sizes. Coverage: 250-300 Sq Ft/Gal; Thinning: Brush/Roll Application - Totalboat Special Brushing Thinner 100; Spray Application - Xylene.
Easy To Keep Clean: Remove Grease, Oil, And Grime From The High-Gloss Finish Using A Cleaner/Degreaser. Totalbilge Won't Lift, Crack, Peel, Or Stain.
Choose Light Gray Or White: Paint Boat Bilge Areas To Protect And Brighten So You Can Find & Fix Leaks And Other Problems Before They Become Costly Damage, Or Find Items Accidentally Dropped Into The Bilge; Both Colors Offer Excellent Coverage And Hide.
Features
- TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat bilges, engine rooms, lazarettes, lockers, stowage areas and bulkheads
- CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly damage, or find items accidentally dropped into the bilge; both colors offer excellent coverage and hide
- EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal; prime prepared metals with TotalBoat TotalProtect; for fiberglass prime with TotalProtect if desired; for wood use TotalBoat Topside Primer if desired
- EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain
- CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal; THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100; Spray Application - Xylene
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon Similar To TotalBoat TotalBilge Epoxy Based Bilge
#1
TotalBoat Table Top Epoxy Resin 1 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts
Asin: B00S9QJIY6 | Model: TB-9335 | PartNumber: TB-9335 | Ean: 0811932021441, 0811932020765 | UPC: 811932020765, 811932021441
2 Part Epoxy Is Easy To Use: Just Mix 1 Part Resin To 1 Part Hardener, Stir Thoroughly, And Pour On Your Prepared Surface; The Epoxy Will Level On Its Own And Cure At Room Temperature; Maximum Pour Depth Per Layer Is 1/8" - 1/4".
1 Gallon Epoxy Kit Includes 1/2 Gallon Of Resin & 1/2 Gallon Of Hardener; Application Temperature: 70-80°F; Working Time: 20 Min. @ 70°F; Recoat Time: 4-8 Hrs; Cure Time: 16-20 Hrs @ 70°F; Coverage: 12.8 Sq Ft At 1/8" Thick; Store At 60-90°F.
No Vocs, Low Odor, Bpa-Free: No Harsh Fumes - Ideal For Indoor Or Shop Use With Adequate Ventilation And Proper Ppe; All Ingredients In This Food Safe Epoxy Resin Are On The Usda Approved List For Contact With Food, Once Cured; 100% Made In The Usa.
Epoxy Resists Scratches, Stains And Yellowing: Self-Leveling Formula Cures To A Finish As Smooth As Glass; Use This Versatile Diy Resin On Wood, Concrete, Ceramic, Stainless Steel And More; 100% Waterproof Upon Cure.
Features
- CLEAR EPOXY RESIN for a high gloss finish on bar tops, table tops & countertops; add pigments, tints or encapsulations to make your piece truly unique; versatile craft resin is also great for coating tumblers and casting coasters & jewelry
- EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass; use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more; 100% waterproof upon cure
- 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface; the epoxy will level on its own and cure at room temperature; maximum pour depth per layer is 1/8 - 1/4
- NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE; all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured; 100% made in the USA
- 1 GALLON EPOXY KIT includes 1/2 gallon of resin & 1/2 gallon of hardener; application temperature: 70-80 F; working time: 20 min. @ 70 F; recoat time: 4-8 hrs; cure time: 16-20 hrs @ 70 F; coverage: 12.8 sq ft at 1/8 thick; store at 60-90 F
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 10.00 x 7.00 x 5.00 inches | Weight: 9.30 pounds
See On Amazon #2
TotalBoat-382660 - Thixo (185ml Cartridge) | Thickened Epoxy Adhesive | for Bonding, Gluing, Sealing and Filling | Use on Wood, Fiberglass, Metals, Brick, Stone, Glass, Tile & More
Asin: B00HRG875K | Ean: 0811932020291 | UPC: 811932020291
Thickened Epoxy Wont Sag: Unique Viscosity Is Perfect For Working Overhead Or On Vertical Surfaces. It Stays Where You Apply It. However, Thixo Is Still Thin Enough To Wet Out Fiberglass.
Wide Range Of Applications: Use On Wood, Fiberglass, Metals, Brick, Concrete, Glass, Slate, Tile, Stone And More. Thixo Is Used By Marine Trade Professionals, Construction Industry, Homeowners, And Diy Makers For Projects Ranging From Boat Building & Repair To Furniture Builds And Home Renovation.
Long Working Time Lets You Work At Your Pace: At 77°F, Thixo Gives You A Generous 50 Minutes Of Working Time. The Short 30-35 Minute Gel Time Means That Once You Apply It, It Sets Up Fast And Cures Fully In 24 Hours.
No Mixing, Mess, Or Waste: No Need To Mix Resin And Hardener. Included Mixing Tips Automatically Ensure Perfect 2:1 Mix Ratio Every Time. Convenient 185 Ml Cartridge Fits All Standard Caulking Guns. Each Cartridge Includes 2 Tips.
Features
- HIGH STRENGTH 2-PART THICKENED EPOXY ADHESIVE: For structural bonding, gluing, filling, and sealing projects. Cured epoxy can be drilled, sanded and painted, and is 100% waterproof
- NO MIXING, MESS, OR WASTE: No need to mix resin and hardener. Included mixing tips automatically ensure perfect 2:1 mix ratio every time. Convenient 185 ml cartridge fits all standard caulking guns. Each cartridge includes 2 tips
- THICKENED EPOXY WONT SAG: Unique viscosity is perfect for working overhead or on vertical surfaces. It stays where you apply it. However, Thixo is still thin enough to wet out fiberglass
- LONG WORKING TIME LETS YOU WORK AT YOUR PACE: At 77 F, Thixo gives you a generous 50 minutes of working time. The short 30-35 minute gel time means that once you apply it, it sets up fast and cures fully in 24 hours
- WIDE RANGE OF APPLICATIONS: Use on wood, fiberglass, metals, brick, concrete, glass, slate, tile, stone and more. Thixo is used by marine trade professionals, construction industry, homeowners, and DIY makers for projects ranging from boat building & repair to furniture builds and home renovation
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 1.00 pounds
See On Amazon #3
TotalBoat Table Top Epoxy Resin 2 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts
Asin: B07PYVYXNL | Model: 519708 | PartNumber: 519708 | Ean: 0811932024299 | UPC: 811932024299
2 Part Epoxy Is Easy To Use: Just Mix 1 Part Resin To 1 Part Hardener, Stir Thoroughly, And Pour On Your Prepared Surface; The Epoxy Will Level On Its Own And Cure At Room Temperature; Maximum Pour Depth Per Layer Is 1/8" - 1/4".
2 Gallon Epoxy Kit Includes 1 Gallon Of Resin & 1 Gallon Of Hardener; Application Temperature: 70-80°F; Working Time: 20 Min. @ 70°F; Recoat Time: 4-8 Hrs; Cure Time: 16-20 Hrs @ 70°F; Coverage: 12.8 Sq Ft Per Gallon At 1/8" Thick; Store At 60-90°F.
No Vocs, Low Odor, Bpa-Free: No Harsh Fumes - Ideal For Indoor Or Shop Use With Adequate Ventilation And Proper Ppe; All Ingredients In This Food Safe Epoxy Resin Are On The Usda Approved List For Contact With Food, Once Cured; 100% Made In The Usa.
Epoxy Resists Scratches, Stains And Yellowing: Self-Leveling Formula Cures To A Finish As Smooth As Glass; Use This Versatile Diy Resin On Wood, Concrete, Ceramic, Stainless Steel And More; 100% Waterproof Upon Cure.
Features
- CLEAR EPOXY RESIN for a high gloss finish on bar tops, table tops & countertops; add pigments, tints or encapsulations to make your piece truly unique; versatile craft resin is also great for coating tumblers and casting coasters & jewelry
- EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass; use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more; 100% waterproof upon cure
- 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface; the epoxy will level on its own and cure at room temperature; maximum pour depth per layer is 1/8 - 1/4
- NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE; all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured; 100% made in the USA
- 2 GALLON EPOXY KIT includes 1 gallon of resin & 1 gallon of hardener; application temperature: 70-80 F; working time: 20 min. @ 70 F; recoat time: 4-8 hrs; cure time: 16-20 hrs @ 70 F; coverage: 12.8 sq ft per gallon at 1/8 thick; store at 60-90 F
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 6.00 pounds
See On Amazon #4
TotalBoat 5:1 Epoxy Resin Kit (Gallon, Fast Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair
Asin: B00HR85152 | Model: 365247 | PartNumber: 365247 | Ean: 0811932021007 | UPC: 811932021007
Choose Fast Or Slow Hardener: Pot Life Ranges From 12 Minutes @ 75°F For Fast Hardener, To 20 Minutes @ 75°F For Slow Hardener.
Pumps Included: Metered Resin And Hardener Pumps Provide The Exact 5 Parts Resin To 1 Part Hardener Ratio For A Proper Cure Every Time. Easy-To-Use Pumps Are Calibrated So All You Do Is Mix One Full Pump Of Hardener To Every One Full Pump Of Resin.
Choose From Three Epoxy Kit Sizes: Quart, Gallon, And 4.5 Gallon, With Your Choice Of Totalboat 5:1 Fast Or Slow Hardener. Kits Include Resin, Hardener, And Calibrated Pumps. Compatible With Other 5:1 Epoxy Resin Systems.
Ideal Viscosity For Wetting Out Fiberglass Cloth And Other Reinforcement Fabrics. Self-Leveling Properties Are Ideal For Coating And Laminating. Combine With Fillers To Make A High-Strength Fairing Compound, Filleting Material, Or Adhesive.
Features
- PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair projects. For use on wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel, and lead. Not suitable for clear-coating applications
- IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating. Combine with fillers to make a high-strength fairing compound, filleting material, or adhesive
- CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75 F for Fast Hardener, to 20 minutes @ 75 F for Slow Hardener
- CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, and calibrated pumps. Compatible with other 5:1 epoxy resin systems
- PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #5
TotalBoat-409336 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Quart Kit)
Asin: B00LLL9FU8 | Model: 409336 | PartNumber: 409336 | Ean: 0811932021083 | UPC: 811932021083
Easy To Mix And Apply: Foolproof 1 To 1 Mix Ratio - Just Mix The Blue And Yellow Components Until They Turn Green. Creamy Smooth Consistency Makes It Easy To Spread And Feather To A Fine Edge; Won't Sag On Vertical And Overhead Surfaces.
Choose Kit Size: 2-Pint Kit, 2-Quart Kit Or 1-Gallon Kit. Note: Totalboat Gelcoat Should Not Be Applied Directly Over Totalfair Or Gelcoat Will Not Cure Properly. Before Applying Gelcoat, Apply Totalboat 2-Part Epoxy Primer Or Totalprotect Over Totalfair.
Cures Fast. Easy To Sand And Paint: Quick-Drying Compound Is Ready To Sand In Just 3 Hours At 80°F; Cured Fairing Compound Sands Easily; Compatible With Latex And Epoxy Primers And Paints.
Super Smooth Finish For Permanent, Waterproof Repairs: Marine Filler Bonds Strongly To Damaged Areas And Cures Without Pinholes On Wood, Aluminum, Steel And Fiberglass Repair Areas; Cured Totalfair Is Waterproof; Use Above And Below The Waterline.
Features
- HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
- SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
- EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
- CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80 F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
- CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 1.00 Pounds
See On Amazon #6
TotalBoat - 512952 - Polyester Structural Repair Putty - Marine Grade Long Strand Fiber Fiberglass Reinforced Filler for Boat and Automotive Repair (Gallon Kit)
Asin: B07BR5VNH1 | Ean: 0811932023704 | UPC: 811932023704
Easy To Mix, Easy To Apply: For A 100G Mass, Catalyze With 1% Mekp To Get 15-20 Min. Of Working Time At 70°F (14 Drops Of Mekp Per Ounce Of Putty); Adjust Amount Of Catalyst To Control Working Time; Paste-Like Consistency Is Easy To Spread And Won’T Sag.
Available In Quart And Gallon Kits: Includes 2 Oz. Mekp. This Versatile Bonding Compound Can Bond Dissimilar Materials And Can Also Be Used In Many Home, Auto, Construction, And Aerospace Applications, With No Shrinking Or Cracking, Even In Bulk Fillings.
Fast-Setting Structural Adhesive Is Ideal For Fiberglass & Gelcoat Repair; For Cosmetic Fairing, Overcoat Polyester Structural Repair Putty With Totalboat Polyester Fairing Compound; It Sands Smooth Easily & Can Be Finished With Totalboat Gelcoat With Wax.
Marine Filler Has Premium Polyester Resin And Long Strand Glass Fibers For Strength, Impact Resistance & Elasticity; Ideal For Bonding Decks, Stringers & Liners To Hulls; Filleting And Bonding Bulkheads, And Filling Screw Holes, Bolt Holes, Chips & Dents.
Features
- PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming; great for boat building & repair on fiberglass, wood, metal, polyester laminates & core materials; use above or below waterline
- MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity; ideal for bonding decks, stringers & liners to hulls; filleting and bonding bulkheads, and filling screw holes, bolt holes, chips & dents
- EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70 F (14 drops of MEKP per ounce of putty); adjust amount of catalyst to control working time; paste-like consistency is easy to spread and won t sag
- FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair; for cosmetic fairing, overcoat Polyester Structural Repair Putty with TotalBoat Polyester Fairing Compound; it sands smooth easily & can be finished with TotalBoat Gelcoat with wax
- AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many home, auto, construction, and aerospace applications, with no shrinking or cracking, even in bulk fillings
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #7
TotalBoat Epoxy Primer Thinner 200 Marine Solvent (Quart), Clear, 32 Fl Oz (Pack of 1)
Asin: B087RW6VLW | Model: 520415 | PartNumber: 520415 | Ean: 0811932024671 | UPC: 811932024671
Ideal Surface Prep Solvent Wipe For Rubberized Inflatable Materials Prior To Applying Totalboat Inflatable Boat Paint.
Available In Quart Size. 100% Made In The Usa. Use Only With The Totalboat Products Specified.
Makes It Easy To Remove Paint From Tools And Equipment After Painting Is Done.
Perfect For Brush, Roller, Or Spray Applications.
Features
- Marine solvent specially formulated for thinning or reducing TotalBoat TotalProtect, TotalBoat Aluminum Boat Barrier Coat, and TotalBoat 2-Part Epoxy Primer systems.
- Perfect for brush, roller, or spray applications
- Ideal surface prep solvent wipe for rubberized inflatable materials prior to applying TotalBoat Inflatable Boat Paint
- Makes it easy to remove paint from tools and equipment after painting is done
- Available in Quart size. 100% made in the USA. Use only with the TotalBoat products specified
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #8
TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas, White, 1 Quart (Pack of 1)
Asin: B00LLH4UZW | Model: 409320 | PartNumber: 409320 | Ean: 0811932021151, 0811932020970 | UPC: 811932021151, 811932020970
Easy To Use: Apply 1-2 Coats By Brushing, Rolling Or Spraying On Prepared Fiberglass, Wood And Metal; Prime Prepared Metals With Totalboat Totalprotect; For Fiberglass Prime With Totalprotect If Desired; For Wood Use Totalboat Topside Primer If Desired.
Choose Color And Size: Available In White And Gray Colors, In Quart And Gallon Sizes. Coverage: 250-300 Sq Ft/Gal; Thinning: Brush/Roll Application - Totalboat Special Brushing Thinner 100; Spray Application - Xylene.
Easy To Keep Clean: Remove Grease, Oil, And Grime From The High-Gloss Finish Using A Cleaner/Degreaser. Totalbilge Won't Lift, Crack, Peel, Or Stain.
Choose Light Gray Or White: Paint Boat Bilge Areas To Protect And Brighten So You Can Find & Fix Leaks And Other Problems Before They Become Costly Damage, Or Find Items Accidentally Dropped Into The Bilge; Both Colors Offer Excellent Coverage And Hide.
Features
- TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat bilges, engine rooms, lazarettes, lockers, stowage areas and bulkheads
- CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly damage, or find items accidentally dropped into the bilge; both colors offer excellent coverage and hide
- EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal; prime prepared metals with TotalBoat TotalProtect; for fiberglass prime with TotalProtect if desired; for wood use TotalBoat Topside Primer if desired
- EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain
- CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal; THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100; Spray Application - Xylene
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #9
TotalBoat-439901 TotalProtect Epoxy Barrier Coat System (White, Gallon), 1 Gallon (Pack of 1)
Asin: B00ULR2UV4 | Model: 439901 | PartNumber: 439901 | Ean: 0811932021557 | UPC: 811932021557
Provides Superior Protection On All Underwater Metals.
Available In White Or Gray In Quart Or Gallon Sizes. Coverage: 225 Sq. Ft. Per Gallon (At 7 Mils Wet). Thinner: Totalboat Epoxy Primer Thinner 200..
Easy To Mix And Apply By Roller Or Spray. No Sanding Required. Fast Drying Primer Creates A Flexible, Durable Epoxy Barrier Coat..
Excellent For Gelcoat Blister Prevention And Repair Work On Fiberglass Boats.
Features
- High-build two part epoxy primer and barrier coat for use above and below the waterline
- Excellent for gelcoat blister prevention and repair work on fiberglass boats
- Provides superior protection on all underwater metals
- Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat.
- Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200.
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #10
TotalBoat ThickSet Deep Pour Epoxy Resin Kit (1.3 Gallon) - Crystal Clear Thick Pour Resin for Art, Casting, Epoxy River Tables, Live Edge Slabs, Molds, Wood
Asin: B07QKF5F6F | Ean: 0811932024374 | UPC: 811932024374
Pour Epoxy Up To 1" Thick Per Single Layer: Pour Single Layers Of Resin Up To 1/2″ Thick For Larger Casting Applications Such As Slab And River Table Pours, And Up To 1" Thick For Smaller Molds; For Even Deeper Pours Per Layer, Try Total Boat Thickset Fathom (Sold Separately).
Low Voc, Low Odor Resin Is Available In Four Sizes: 1.3 Quart Kit (1 Qt Resin, 1/3 Qt Hardener), 1.3 Gallon Kit (1 Gal Resin, 1/3 Gal Hardener), 4 Gallon Kit (3 Gal Resin, 1 Gal Hardener) And 8 Gallon Kit (6 Gal Resin, 2 Gal Hardener); 100% Made In The Usa.
Easy To Use, Easy To Tint: Simple Mix Ratio Of 3 Parts Epoxy Resin To 1 Part Hardener, And Long Working Time Make It Easy To Use; To Add Interest, Tint Mixed Liquid Epoxy With Mica Powder, Universal Tints, Alcohol Ink Pigments And Other Epoxy-Safe Colorants.
Crystal Clear Epoxy Resin Self-Levels To Creates A High-Gloss, Glass-Like Finish On Prepared Wood, Concrete, Stone, Ceramic And Metal Surfaces; Great For Deep Casting And Molding Projects To Create Unique Sculptures, Figurines, Jewelry And More.
Features
- DEEP POUR EPOXY RESIN AND HARDENER KITS for river tables, live-edge slabs, casting, deep resin molds, art, embedding, encapsulating and filling deep voids in wood; waterproof resin cures without shrinkage, cracking or yellowing
- CRYSTAL CLEAR EPOXY RESIN self-levels to creates a high-gloss, glass-like finish on prepared wood, concrete, stone, ceramic and metal surfaces; great for deep casting and molding projects to create unique sculptures, figurines, jewelry and more
- POUR EPOXY UP TO 1 THICK PER SINGLE LAYER: Pour single layers of resin up to 1/2 thick for larger casting applications such as slab and river table pours, and up to 1 thick for smaller molds; for even deeper pours per layer, try Total Boat ThickSet Fathom (sold separately)
- EASY TO USE, EASY TO TINT: Simple mix ratio of 3 parts epoxy resin to 1 part hardener, and long working time make it easy to use; to add interest, tint mixed liquid epoxy with mica powder, universal tints, alcohol ink pigments and other epoxy-safe colorants
- LOW VOC, LOW ODOR RESIN IS AVAILABLE IN FOUR SIZES: 1.3 Quart Kit (1 qt resin, 1/3 qt hardener), 1.3 Gallon Kit (1 gal resin, 1/3 gal hardener), 4 Gallon Kit (3 gal resin, 1 gal hardener) and 8 Gallon Kit (6 gal resin, 2 gal hardener); 100% made in the USA
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 12.85 Pounds
See On Amazon
Looking For Something Else?
Search