Adafruit I2C Non-Volatile FRAM Breakout - 256Kbit / 32KByte [ADA1895]
Asin: B00OKJFAZW | Model: 100474 | PartNumber: 100474 | Ean: 0701980281938 | UPC: 701980281938
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fram Chip Has 256 Kbits (32 Kbytes) Of Storage.
Run At Up To 1Mhz I2c Rates.
I2c Interface.
Unlike Flash Or Eeprom There's No Pages To Worry About.
Features
- Allows for a lower power usage and a faster write performance
- Unlike Flash or EEPROM there's no pages to worry about
- FRAM chip has 256 Kbits (32 KBytes) of storage
- I2C interface
- Run at up to 1MHz I2C rates
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.20 x 3.54 x 2.36 inches | Weight: 0.01 Pounds
See On Amazon Similar To Adafruit I2C NonVolatile FRAM Breakout
#1
Adafruit MicroSD Card Breakout Board+ [ADA254]
Asin: B00NAY2NAI | Model: 100448 | PartNumber: 100448 | Ean: 0689481799964, 0701980281679 | UPC: 689481799964, 701980281679
Know When Your Adapter Is Reading/Writing With Led Light.
Read And Write 2Gb+ Of Storage.
Proper Level Shifting Built-In.
Features
- Assembled and tested
- Proper level shifting built-in
- Know when your adapter is reading/writing with LED light
- Read and Write 2gb+ of storage
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 50.00 Grams
See On Amazon #2
Adafruit FT232H Breakout - General Purpose USB to GPIO+SPI+I2C
Asin: B00XW2MD30 | Model: P2264 | PartNumber: P2264 | Ean: 0711978445730, 7107567371390, 0748347530469, 3700386522642, 4060137024658 | UPC: 748347530469, 711978445730
Back-Compatible Revision For Board Size, Mounting Holes And Pinouts.
Ft232h Breakout Is Like Adding A Little Swiss Army Knife For Serial Protocols To Your Computer.
New Stemma Qt Connector Lets You Plug & Play Any Stemma Qt Or Qwiic Devices, Sensors And Displays.
Features
- Updated in 2020 with a modern USB C connector on the board, a I2C Switch to connect D1 & D1, and 3V power output in
- New Stemma QT connector lets you plug & play any Stemma QT or Qwiic devices, sensors and displays
- Back-compatible revision for board size, mounting holes and pinouts
- FT232H breakout is like adding a little swiss army knife for serial protocols to your computer
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.20 x 3.54 x 2.36 inches | Weight: 0.00 pounds
See On Amazon #3
Adafruit 1.44" Color TFT LCD Display with MicroSD Card breakout [ADA2088]
Asin: B00SK6932C | Model: 2088 | PartNumber: 2088 | Ean: 0711978442807 | UPC: 711978442807
Can Be Used With Every Kind Of Microcontroller Even Low Memor, Small Ones With Few Available Pins.
Displays Full 16-Bit Color Using Adafruit's Library Code.
Has Its Own Pixel-Addressable Frame Buffer.
Features
- Best way to add a small, colorful and bright display to any project
- Has its own pixel-addressable frame buffer
- Can be used with every kind of microcontroller even low memor, small ones with few available pins
- Displays full 16-bit color using Adafruit's library code
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.18 x 4.33 x 2.17 inches | Weight: 0.02 pounds
See On Amazon #4
Adafruit 4502 Adafruit ISM330DHCX - 6 DoF IMU - Accelerometer and Gyroscope - Stemma QT/Qwiic
Asin: B084H3KC4B
Accelerometer: ±2/±4/±8/±16 G At 1.6 Hz To 6.7Khz Update Rate..
Gyroscope: ±125/±250/±500/±1000/±2000/±4000 Dps At 12.5 Hz To 6.7 Khz.
This Imu Sensor Has 6 Degrees Of Freedom.
Features
- ST ISM330DHCX: an industrial quality Accelerometer+Gyroscope 6-DOF IMUs (inertial measurement unit) from ST.
- This IMU sensor has 6 degrees of freedom
- accelerometer: 2/ 4/ 8/ 16 g at 1.6 Hz to 6.7KHz update rate.
- gyroscope: 125/ 250/ 500/ 1000/ 2000/ 4000 dps at 12.5 Hz to 6.7 KHz
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.10 Pounds
See On Amazon #5
USB Type C Breakout Board - Downstream Connection Adafruit 4090
Asin: B07Y3BBYVG | Model: 4090 | PartNumber: 4090 | Ean: 8436565502956
Usb-C Has A Reversible Connector Design With More Data Pins And Higher Current Output Capability.
Mimics Usb 2.0 For A Downstream Connection.
Features
- Add a USB-C connection to your latest project
- Mimics USB 2.0 for a downstream connection
- USB-C has a reversible connector design with more data pins and higher current output capability
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 1.57 x 2.36 inches | Weight: 0.02 pounds
See On Amazon #6
Adafruit I2C Controlled + Keypad Shield Kit for 16x2 LCD [ADA715]
Asin: B00SLYAOJE | Model: 715 | PartNumber: 715 | Ean: 0711978441268 | UPC: 711978441268
Included Is A High Quality, Usa-Made Pcb And All The Components (Buttons, Header Etc)! - Kit Does Not Come With A 16X2 Lcd..
Compatible With Classic Arduinos Plus The Mega R3!.
Uses Only The I2c Pin.
Features
- This kit makes it easy to use a 16x2 Character LCD on your next project
- Uses only the I2C pin
- Included is a high quality, USA-made PCB and all the components (buttons, header etc)! - Kit does not come with a 16x2 LCD.
- Compatible with classic Arduinos plus the Mega R3!
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.00 pounds
See On Amazon #7
Adafruit OLED Breakout Board - 16-bit Color 1.5" w/microSD Holder [ADA1431]
Asin: B00XW2ME84 | Ean: 0711978445587 | UPC: 711978445587
Fully Assembled Breakout With Oled Display, A Small Boost Converter And A Microsd Card Holder.
No Backlight And Very High Contrast.
Ssd1351 Driver Chip, Which Manages The Display.
Features
- Set each pixel with 16-bits of resolution for a large range of colors.
- SSD1351 driver chip, which manages the display
- Fully assembled breakout with OLED display, a small boost converter and a microSD card holder
- No backlight and very high contrast
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.04 Pounds
See On Amazon #8
Adafruit 4201 Airlift ESP32 WiFi Co-Processor Breakout Board
Asin: B07Z587RBF | Model: 4201 | PartNumber: 4201
Send Basic But Powerful Socket-Based Commands Over 8Mhz Spi For High Speed Data Transfer.
Fully Assembled And Tested, Pre-Programmed With Esp32 Spi Wifi Co-Processor Firmware.
Works Great With Circuitpython, A Samd51/Cortex M4 Minimum Required Since We Need A Bunch Of Ram.
A Tri-State Chip For Mosi So You Can Share The Spi Bus With Other Devices.
Features
- ESP32 module on a PCB with level shifting circuitry
- A tri-state chip for MOSI so you can share the SPI bus with other devices
- Send basic but powerful socket-based commands over 8MHz SPI for high speed data transfer
- Works great with CircuitPython, a SAMD51/Cortex M4 minimum required since we need a bunch of RAM
- Fully assembled and tested, pre-programmed with ESP32 SPI WiFi co-processor firmware
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.03 Pounds
See On Amazon #9
Adafruit SWD (2x5 1.27mm) Cable Breakout Board [ADA2743]
Asin: B01GQFVGXW | Model: LYSB01GQFVGXW-ELECTRNCS | PartNumber: LYSB01GQFVGXW-ELECTRNCS | Ean: 0604310747626 | UPC: 604310747626
No Cables Included.
Handy Breakout Board And Headers When You Want To Use Jtag/Swd Debugging..
Features
- Designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming
- Handy breakout board and headers when you want to use JTAG/SWD debugging.
- No cables included
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.01 Pounds
See On Amazon #10
Adafruit SPI Non-Volatile FRAM Breakout - 64Kbit / 8KByte [ADA1897]
Asin: B00R3OVG36 | Model: 1897 | PartNumber: 1897 | Ean: 0711978441787 | UPC: 711978441787
No Pages To Worry About Like With Flash Or Eeprom.
64 Kbits (8 Kbytes) Of Storage, Interfaces Using Spi, And Can Run At Up To 20Mhz Spi Clock Rates.
Excellent For Low-Power Or Inconsistent-Power Datalogging Or Data Buffering Where You Want To Stream Data Fast While Also Keeping The Data When There's No Power..
Features
- Stable handling (the bytes you write are non-volatile) with dynamic responsiveness
- Excellent for low-power or inconsistent-power datalogging or data buffering where you want to stream data fast while also keeping the data when there's no power.
- No pages to worry about like with Flash or EEPROM
- 64 Kbits (8 KBytes) of storage, interfaces using SPI, and can run at up to 20MHz SPI clock rates
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.20 x 3.74 x 2.56 inches | Weight: 0.04 pounds
See On Amazon #11
Adafruit ATWINC1500 WiFi Breakout
Asin: B01GVI1NKA | Model: 2999 | PartNumber: 2999 | Ean: 0748347530650, 0743724369304 | UPC: 748347530650, 743724369304
Since This Is Our New Favoritest Spi-Protocol Wifi Module We've Decided To Make A Little Breakout For It. The Breakout Comes With Level Shifting On All The Input Pins So You Can Use It With 3V Or 5V Logic. A 3.3V Voltage Regulator That Can Handle The 300Ma Spikes Lets You Power From 3-5.5Vdc..
There's Also 3 Leds That You Can Control Over The Spi Interface (Part Of The Library Code) Or You Can Have Controlled By The Arduino Library. They'll Light Up When Connected To An Ssid, Or Transmitting Data..
This Module Works With 802.11B, G, Or N Networks & Supports Wep, Wpa And Wpa2 Encryption. You Can Use It In Soft Ap Mode To Create An Ad-Hoc Network. For Secure Client Connections, There Is Tls 1.2 Support In Firmware 19.4.4!.
Features
- The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino M0's and M4s but does not work on Uno (328P) and may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds.
- This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!
- Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC.
- There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data.
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 3.74 x 2.56 inches | Weight: 0.04 Pounds
See On Amazon #12
SPI Non-Volatile FRAM Breakout - 2 Mbit / 256 KBytes - MB85RS2MTA Ada 4718
Asin: B0BPN3WX2T | Model: 4718 | PartNumber: 4718 | Ean: 5060627396929
This Particular Fram Chip Has 2 Megabits (256 Kbytes) Of Storage, Interfaces Using Spi, And Can Run At Up To 40 Mhz Clock Rates. Each Byte Can Be Read And Written Instantaneously (Like Sram) But Will Keep The Memory For 95 Years At Room Temperature..
Looking For Something With More Byte? Check Out The 4 Mbit / 512 Kbytes Breakout. Or, On The Other Hand, If You Need A Smaller Breakout We Have The 64Kbit / 8Kbyte Spi Fram Breakout Board. Additionally, We Also Have An I²c Fram Breakout Board, Larger In Size But Slower (1Mhz Max I²c Clock Rate)..
We Put This Handy Ferro-Electric Marvel Onto A Breakout Board With 3.3V Logic Level Shifting And Regulator So That You Can Use This Chip With Either 3V Or 5V Power And Logic. It Comes In A Breadboard-Friendly Breakout And Bit Of Standard 0.1" Header..
Now, With Our Spi Fram Breakout Board You Can Add Some Fram Storage To Your Next Diy Project. Fram Allows For A Lower Power Usage And A Faster Write Performance. It's Excellent For Low-Power Or Inconsistent-Power Datalogging Or Data Buffering Where You Want To Stream Data Fast While Also Keeping The Data When There's No Power. Unlike Flash Or Eeprom There's No Pages To Worry About. Each Byte Can Be Read/Written 10,000,000,000,000 Times So You Don't Have To Worry Too Much About Wear Leveling..
Features
- FRAM, or Ferroelectric Ram, is the coolest new data storage method that all the fashion magazines are talking about. Oh wait, no that's quilted handbags. But FRAM is pretty damn cool too! It's similar to Dynamic random-access memory, only with a ferroelectric layer instead of a dielectric layer. This gives it stable handling (the bytes you write are non-volatile) with dynamic responsiveness (you can write them very fast!)
- Now, with our SPI FRAM breakout board you can add some FRAM storage to your next DIY project. FRAM allows for a lower power usage and a faster write performance. It's excellent for low-power or inconsistent-power datalogging or data buffering where you want to stream data fast while also keeping the data when there's no power. Unlike Flash or EEPROM there's no pages to worry about. Each byte can be read/written 10,000,000,000,000 times so you don't have to worry too much about wear leveling.
- This particular FRAM chip has 2 Megabits (256 KBytes) of storage, interfaces using SPI, and can run at up to 40 MHz clock rates. Each byte can be read and written instantaneously (like SRAM) but will keep the memory for 95 years at room temperature.
- We put this handy ferro-electric marvel onto a breakout board with 3.3V logic level shifting and regulator so that you can use this chip with either 3V or 5V power and logic. It comes in a breadboard-friendly breakout and bit of standard 0.1 header.
- Looking for something with more byte? Check out the 4 MBit / 512 KBytes breakout. Or, on the other hand, if you need a smaller breakout we have the 64Kbit / 8KByte SPI FRAM breakout board. Additionally, we also have an I C FRAM breakout board, larger in size but slower (1MHz max I C clock rate).
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #13
ISO1540 Bidirectional I2C Isolator - Stemma QT/Qwiic Adafruit 4903
Asin: B09MC2RQ5P | Model: 4903 | PartNumber: 4903
3-V To 5.5-V Supply Range.
-40°C To +125°C Operating Temperature.
Open-Drain Outputs With 3.5-Ma Side 1 And 35-Ma Side 2 Sink Current Capability.
Supports Up To 1-Mhz Operation.
Features
- Isolated bidirectional, I2C compatible, communication
- Supports up to 1-MHz operation
- 3-V to 5.5-V supply range
- Open-drain outputs With 3.5-mA Side 1 and 35-mA Side 2 sink current capability
- -40 C to +125 C operating temperature
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #14
Adafruit 1105 Pi Unassembled T-Cobbler Breakout Kit
Asin: B00KX3IGE6 | Model: 43230-13597 | PartNumber: 43230-13597 | Ean: 0848864016801 | UPC: 848864016801
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.40 x 3.30 x 2.00 inches | Weight: 0.02 Pounds
See On Amazon #15
Adafruit Standalone AVR ISP Programmer Shield Kit - includes blank chip! [ADA462]
Asin: B00SK8OSAC | Model: ADA462 | PartNumber: ADA462 | Ean: 0711978441176 | UPC: 711978441176
Program Blank Chips Without A Computer.
Comes With A Blank Atmega328p Dip Chip.
Features
- Turn any Arduino into an AVR chip burner
- Comes with a blank ATmega328P DIP chip
- Program blank chips without a computer
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.09 Pounds
See On Amazon #16
Adafruit RGB Positive 16x2 LCD+Keypad Kit for Raspberry Pi [ADA1109]
Asin: B00KB2K872 | Ean: 0711978441459, 0700153591515 | UPC: 700153591515, 711978441459
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search