TRIM Cutting & Grinding Fluids MS690XT/1 MicroSol 690XT Low foam Premium Semisynthetic Microemulsion Coolant, High Lubricity, 1 gal Jug
Asin: B00R9LYT28 | Model: MS690XT/1 | PartNumber: MS690XT/1 | Ean: 0641238072973 | UPC: 641238072973
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Compatible With A Very Wide Range Of Material Including Steels, Copper, And Aluminum Alloys, And Many Plastics And Composites.
Contains No Nitrites, Triazines, Phenols, Chlorinated, Or Sulfurized Ep Additives.
Excellent Alternative To Chlorinated Soluble Oils On High-Silica Aluminum Alloys.
Low Foaming For Todays Demanding High-Pressure, High-Volume Applications.
Features
- Dramatically extends useful life without the need for tank-side biocides or fungicides
- Low foaming for todays demanding high-pressure, high-volume applications
- Compatible with a very wide range of material including steels, copper, and aluminum alloys, and many plastics and composites
- Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
- Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
- See more on Amazon...
Brand: Trim | Manufacturer: Master Chemical Corporation
See On Amazon Similar To TRIM Cutting Grinding Fluids
#1
Gartful Silicone Mats for Kitchen Counter, Large Silicone Countertop Protector 25" by 17", Nonskid Heat Resistant Desk Saver Pad, Multipurpose Mat, Placemat, Black
Asin: B08MTRY55K
Durable & Reusable : Countertop Pad Is Made Of 100 Percent Food Grade Silicone, Heat Resistant Between -40℉ And 446℉.Non-Slip, Non-Stick, Not Easy To Deform Or Tear Up, Durable Reusable..
Easy To Clean & Store : Non-Skid Table Mat Is Washable, Easy To Clean With Water And Dishcloth.It Can Be Stored Rolled Up Or Folded, Occupying Minimal Space In A Drawer Or Cupboard..
Countertop Protector : The Multipurpose Silicone Mat Can Be Used As Placemats, Pot Holder, Dish Mats, Tableware, Trivet, Drains, Heat Insulated Pads To Protect The Kitchen Countertops And Other Surfaces Against Spills, Scratches, Grease, Heat, Etc..
Non-Slip Bottom : The Kitchen Protector Pad Can Stick Tight To The Countertop Or Other Surfaces, Used The Smooth Side Down, It Does Not Slip And Slide On The Countertop..
Features
- Size :Sized at 25"x 17"x 0.03"(Length x Width x Thickness), large enough to protect your counter top, it can be placed under the microwave, air fryer, induction stove, toaster oven, coffee maker etc.
- Non-slip Bottom : The kitchen protector pad can stick tight to the countertop or other surfaces, used the smooth side down, it does not slip and slide on the countertop.
- Durable & Reusable : Countertop pad is made of 100 percent food grade silicone, heat resistant between -40 and 446 .Non-slip, non-stick, not easy to deform or tear up, durable reusable.
- Countertop Protector : The multipurpose silicone mat can be used as placemats, pot holder, dish mats, tableware, trivet, drains, heat insulated pads to protect the kitchen countertops and other surfaces against spills, scratches, grease, heat, etc.
- Easy to Clean & Store : Non-skid table mat is washable, easy to clean with water and dishcloth.It can be stored rolled up or folded, occupying minimal space in a drawer or cupboard.
- See more on Amazon...
Brand: Gartful | Manufacturer: Gartful
Dimensions: 0.00 x 25.00 x 17.00 inches | Weight: 0.60 pounds
See On Amazon #2
10Pcs Needle File Set Hardened Alloy Strength Steel Files- Mini Needle File Set Includes Round, Tapered Round, Half Round, Barrette, Crossing, Knife, Equaling, Warding, Square, and Three Square
Asin: B07PPYWSCY | Model: BB-0011 | PartNumber: BB-0011 | Ean: 0720226166303, 0720226166167, 0725756092276 | UPC: 720226166303, 725756092276, 720226166167
Comes In A Pvc Pouch For Dust-Free Storage.
Perfect For Shaping Soft Metal, Wood, And Plastic.
Dipped Handles For Comfort And Excellent Grip When Exposed To Moisture Or Fluids.
Material: Bearing Hardened Steel.
Features
- Length: 5.5 (140 mm); Handle diameter: 3 mm
- Material: bearing hardened steel
- Comes in a PVC pouch for dust-free storage
- Dipped handles for comfort and excellent grip when exposed to moisture or fluids
- Perfect for shaping soft metal, wood, and plastic
- See more on Amazon...
Brand: KALIM | Manufacturer: KALIM
Dimensions: 7.08 x 7.08 x 7.08 inches | Weight: 0.18 Pounds
See On Amazon #3
20 Pieces Gel Toe Cap, Silicone Toe Protector, Toe Guards for Feet, Protect Toe and Provide Relief from Corns, Callus, Blisters, Ingrown Toenails, Toenails Loss - Size Small
Asin: B07G9FT9LH | Ean: 9153179349034
Easy To Adjust: If Toe Cap Is Too Long, You Can Trim Down The Ends With Scissors To Fit Your Toes Size..
Large Amount: You Will Receive 20 Gel Toe Caps, And There Are Enough For You To Replace. You Needn't Worry About Damage..
Simple And Comfortable To Wear: Our Toe Caps Are Stretchy Which Can Be Worn Easily. Slim Design Fits Easily In Most Shoes, Boots Or Sneakers..
Prevent Painful Rubbing: Toe Caps Can Protect Yourself From Calluses, Blisters And Irritation Which Caused By Walking Or Light Activity..
Features
- Silicone gel material: made of soft and durable medical-grade silicone gel material which is non-toxic, odorless and free of latex! Totally environmental-friendly and healthy toe caps!
- Prevent painful rubbing: toe caps can protect yourself from calluses, blisters and irritation which caused by walking or light activity.
- Easy to adjust: if toe cap is too long, you can trim down the ends with scissors to fit your toes size.
- Simple and comfortable to wear: our toe caps are stretchy which can be worn easily. Slim design fits easily in most shoes, boots or sneakers.
- Large amount: you will receive 20 gel toe caps, and there are enough for you to replace. You needn't worry about damage.
- See more on Amazon...
Brand: MADHOLLY | Manufacturer: MADHOLLY
See On Amazon #4
TRIM Cutting & Grinding Fluids SC520/1 General Purpose Semisynthetic Fluid Concentrate, 1 gal Jug
Asin: B00R9LXVKY | Model: SC520/1 | PartNumber: SC520/1 | Ean: 0641238066019 | UPC: 641238066019
Effective In Most Grinding, Sawing, Drilling, And Cnc Turning And Milling Operations By Varying Concentrations.
Compatible With A Very Wide Range Of Materials Including Cast Iron, Steels, Copper, And Aluminum Alloys As Well As Most Plastics And Composites.
Provides Sufficient Lubricity To Do Down-The-Hole Operations In Aluminum, Cast Iron, And Most Steels, Including Many Stainless Steels.
Low Odor And Mist.
Features
- Good sump life in stand-alone machines
- Low odor and mist
- Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
- Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
- Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys as well as most plastics and composites
- See more on Amazon...
Brand: Trim | Manufacturer: Master Chemical Corporation
See On Amazon #5
Lubri-Cut Cutting Paste for Drilling Metal - 10 Oz Tub | Tapping & Cutting Wax | Drill Cutting Fluid | Drill Cutting Oil | Saw Blade Lubricant | Made in The USA
Asin: B07VP21C68 | Ean: 0682863733853 | UPC: 682863733853
Application: Lubri-Cut Cutting Wax Applies Directly To Your Tool For Better Performance With Less Mess Than A Traditional Cutting Oil For Drilling Metal And Can Be Applied Directly To Saw Blades With A Touch-Free Application For Increased Saw Blade Life.
Made In America: Lubri-Cut Proudly Makes All Of Our Saw Blade Lubricant And Drill Bit Lubricant Products Right Here In America. Our Commitment To Quality Ensures Features Such As No Disposal Upcharges, No Chlorine, Anti-Misting, And Low Odor.
Easy To Use: Lubri-Cut Cutting Paste Has A Thicker Viscosity To Ensure The Wax Adheres To The Drill Bits. Dip Tool Directly Into The Product Apply The Paste To The Work Area. Lubri-Cut Cleans Up With Spatula And Or Rag When Dry.
Best Used For: Lubri-Cut Professional Grade Cutting Paste Is Designed For Superior Drilling, Boring, Sawing, Milling, Tapping, And Tight Tolerance Machining In A Shop Or For Projects At Home.
Features
- HIGH PERFORMANCE: Lubri-Cut is a solid lubricating paste that consists of primarily beeswax and a proprietary blend of cutting oils that improves cutting, increases tool life, and delivers better finishes then cutting fluid alone
- BEST USED FOR: Lubri-Cut professional grade cutting paste is designed for superior drilling, boring, sawing, milling, tapping, and tight tolerance machining in a shop or for projects at home
- APPLICATION: Lubri-Cut cutting wax applies directly to your tool for better performance with less mess than a traditional cutting oil for drilling metal and can be applied directly to saw blades with a touch-free application for increased saw blade life
- EASY TO USE: Lubri-Cut cutting paste has a thicker viscosity to ensure the wax adheres to the drill bits. Dip tool directly into the product apply the paste to the work area. Lubri-Cut cleans up with spatula and or rag when dry
- MADE IN AMERICA: Lubri-Cut proudly makes all of our saw blade lubricant and drill bit lubricant products right here in America. Our commitment to quality ensures features such as no disposal upcharges, no chlorine, anti-misting, and low odor
- See more on Amazon...
Brand: Lubri-Cut | Manufacturer: Martrow Technical Products
Weight: 0.63 Pounds
See On Amazon #6
Machining and Grinding Fluid | Fusion Cool 2240 | General Purpose Coolant for Cutting and Grinding Machine Shop Operations | Semisynthetic (1 Gallon)
Asin: B09LSK9VSL | Ean: 0860007879401 | UPC: 860007879401
Superior Sump Life With Ultra-Low Odor And Mist. Direct Cross-Over / Replacement For Trim Sc 520.
Excellent Tramp Oil Rejection.
Environmental Friendly, Recyclable Coolant.
Works Well For Bandsaw Cutting, Drilling, Tap And Die, Drill Bit Cutting, Worm Drive Saw, And Many More Cutting Applications..
Features
- Fusion Cool 2240 is a top cutting oil for drilling metal. This cutting fluid product is perfect for machining of many kinds of metals. Works well for grinding, milling, CNC machining, tapping, turning.
- Works well for bandsaw cutting, drilling, tap and die, drill bit cutting, worm drive saw, and many more cutting applications.
- Superior sump life with ultra-low odor and mist. Direct Cross-Over / Replacement for Trim SC 520
- Environmental friendly, recyclable coolant
- Excellent Tramp Oil Rejection
- See more on Amazon...
Brand: Fusion Chemical | Manufacturer: Fusion Chemical
See On Amazon #7
Laicengo Vintage Trench Lighter Kerosene Copper Lighter, Windproof Brass Lighter for Men Dad Husband (Fuel Not Included)
Asin: B08FZNY25K | Ean: 0791535219158 | UPC: 791535219158
🔥Great Gift Ideas: This Vintage Oil Lighter Is A Great Gift For Boyfriend, Father Or Friends (Family) In Any Occasions Like Valentine, Business, Birthday, Wedding, Father’S Day, Anniversary, Thanksgiving, Christmas Etc..
🔥After-Sales Service: If You Are Dissatisfied With This Product, Please Contact Us And We Will Give You The Best After Service..
🔥Portable And Easy Carry: With Simple But Functional Outlook, This Retro Pipe Lighter Is Nice For Carrying In Your Pocket Or Wallet. A Great Partner For Lighting Up Anything..
🔥Durability To Last: This Cool Trench Lighter Is Made Of Sturdy And Solid Zinc Alloy Material. Fine Grinding Workmanship. The Cotton Core Has Long Service Life And High Combustibility, With The Wick Cover, Is Great To Prevent Fuel Evaporation..
Features
- Creative one-button switch: With the light press, the cover ejects and automatically ignites. Say goodbye to the traditional grinding wheel ignition method. Not only increase the ignition rate but also not hurt your hand.
- Durability to last: This cool Trench Lighter is made of sturdy and solid Zinc alloy material. Fine grinding workmanship. The cotton core has long service life and high combustibility, with the wick cover, is great to prevent fuel evaporation.
- Great gift ideas: This vintage oil Lighter is a great gift for boyfriend, father or friends (family) in any occasions like valentine, business, birthday, wedding, father s day, anniversary, thanksgiving, Christmas etc.
- Portable and easy carry: With simple but functional outlook, this retro pipe lighter is nice for carrying in your pocket or wallet. A great partner for lighting up anything.
- AFTER-SALES SERVICE: If you are dissatisfied with this product, please contact us and we will give you the best after service.
- See more on Amazon...
Brand: Laicengo | Manufacturer: Fancyspark
Dimensions: 2.60 x 1.40 x 0.55 inches | Weight: 0.15 Pounds
See On Amazon #8
Premium Synthetic Machining Coolant - 128 FL. OZ. (1 Gallon) Cutting/Grinding/Sawing
Asin: B07K4T3KBC | Ean: 0768114157644 | UPC: 768114157644
Tramp Oil Rejection.
Available In 5 Gallon Pails - B08ys2dpnt.
High Operator Acceptance.
Buy More - Save More.
Resists Odors.
Excellent Tool & Sump Life Protection.
Features
- Long Coolant Life
- Excellent Tool & Sump Life Protection
- Tramp Oil Rejection
- Resists Odors
- High Operator Acceptance
- Buy More - Save More
- Available in 5 Gallon Pails - B08YS2DPNT
- See more on Amazon...
Brand: CLIsyntec | Manufacturer: Consultant Lubricants, Inc.
Weight: 8.75 pounds
See On Amazon #9
Renegade Products Big Rig & Semi Truck Metal Polishing Complete Kit with Buffing Wheels, Buffing Compound, Safety Flanges, Polishing Accessories and Rebel Red Liquid Metal Polish
Asin: B07DSKC9HV | Model: LFGRPKR-MP-KIT | PartNumber: LFGRPKR-MP-KIT | Ean: 0619587998879 | UPC: 619587998879
Maintenance Hand Polish - Rebel Red Liquid Metal Polish Along With A Few Microfiber Applicators Are Included In This Kit To Help Maintain And Seal The Ultra High Luster From Your High Speed Polish..
Satisfaction Guaranteed - We Guarantee That You Will Enjoy This Box Kit And We Always Recommend That You Send Us A Message For Technical Questions On How To High Speed Polish The Right Way!.
Show Shine - This Kit Will Take Your Aluminum Tanks And Wheels From Old And Rusted To Bright And Shiny Reflection! Great Rust Oxidation Remover For Your Aluminum All While Restoring Your Aluminum To Shine!.
Sand And Shine - We Designed This Kit To Be Everything You Would Need Other Than A High Speed Right Angle Grinder To Fully Sand And Polish Your Aluminum Tanks, Wheels And Trim. This Kit Contains 9" Airway Buffing Wheels With The Corresponding Compound Bars As Well As Little Polishing Buffs For The Hard To Reach Areas!.
Features
- COMPLETE 12 ITEM KIT - THIS KIT CONTAINS THE AIRWAY BUFFING WHEELS, BUFFING COMPOUND BARS, LIQUID HAND POLISH, SAFETY FLANGES, MICROFIBERS, AND SANDING ESSENTIALS SUCH AS BUFF AND BLEND, SATIN AIRWAY AND 400 GRIT SANDING DISCS.
- SAND AND SHINE - WE DESIGNED THIS KIT TO BE EVERYTHING YOU WOULD NEED OTHER THAN A HIGH SPEED RIGHT ANGLE GRINDER TO FULLY SAND AND POLISH YOUR ALUMINUM TANKS, WHEELS AND TRIM. THIS KIT CONTAINS 9 AIRWAY BUFFING WHEELS WITH THE CORRESPONDING COMPOUND BARS AS WELL AS LITTLE POLISHING BUFFS FOR THE HARD TO REACH AREAS!
- MAINTENANCE HAND POLISH - REBEL RED LIQUID METAL POLISH ALONG WITH A FEW MICROFIBER APPLICATORS ARE INCLUDED IN THIS KIT TO HELP MAINTAIN AND SEAL THE ULTRA HIGH LUSTER FROM YOUR HIGH SPEED POLISH.
- SHOW SHINE - THIS KIT WILL TAKE YOUR ALUMINUM TANKS AND WHEELS FROM OLD AND RUSTED TO BRIGHT AND SHINY REFLECTION! GREAT RUST OXIDATION REMOVER FOR YOUR ALUMINUM ALL WHILE RESTORING YOUR ALUMINUM TO SHINE!
- SATISFACTION GUARANTEED - WE GUARANTEE THAT YOU WILL ENJOY THIS BOX KIT AND WE ALWAYS RECOMMEND THAT YOU SEND US A MESSAGE FOR TECHNICAL QUESTIONS ON HOW TO HIGH SPEED POLISH THE RIGHT WAY!
- See more on Amazon...
Brand: Renegade Products | Manufacturer: Renegade Products USA
See On Amazon #10
Benchmark Fluids Sawlution II 5 gals Synthetic Grinding and Sawing Coolant 5 gal Carboy
Asin: B01MR8XULR | Model: Sawlution II 5 Gallons | PartNumber: Sawlution II 5 Gallons | Ean: 0789185534288 | UPC: 789185534288
Excellent Corrosion Protection.
Used In Band Saws, Mills, Lathe And Machining Centers.
Suitable For Ferrous And Non-Ferrous Metals.
Operator And Machine Friendly.
Features
- Concentrated synthetic cutting and grinding fluid with 2.0 Refractive Index
- Operator and machine friendly
- Excellent corrosion protection
- Suitable for ferrous and non-ferrous metals
- Used in Band Saws, mills, lathe and machining centers
- See more on Amazon...
Brand: Benchmark Fluids | Manufacturer: Benchmark Fluids
See On Amazon #11
Smooth Saw - General Purpose Concentrated Cutting and Sawing Coolant - Advanced Semisynthetic Fluid (1 Gallon)
Asin: B0BT8P5TZM | Model: WVN390901 | PartNumber: WVN390901 | Ean: 0697333211731 | UPC: 697333211731
Prevents Distortion And Increases Accuracy Of Cuts.
Concentrated Formula -Blend With Water At 10-15% Concentration. Adjust As Needed..
Easy Recycling Or Disposal.
Maintains Clean Parts.
Features
- Wide Application Range
- Maintains Clean Parts
- Prevents Distortion and Increases Accuracy of Cuts
- Easy Recycling or Disposal
- Concentrated Formula -Blend with water at 10-15% concentration. Adjust as needed.
- See more on Amazon...
Brand: Winona Van Norman | Manufacturer: Winona Van Norman
See On Amazon #12
GRAFF Premium Wood Carving Disc 4 1/2 Inch for Angle Grinder - Shaping and Grinding Wheel for Wood, Drywall, Chipboard, Plastic - Woodworking Angle Grinder Attachment with 7/8" - 5/8" Arbor
Asin: B09XN5V8NC | Ean: 4814282006232
Unique Design - The Disc Is Curved And Lets You Effortlessly Level The High Spots Or Adjust The Uneven Surfaces In A Few Fast Passes..
Compatibility - The Grinding Wheel Is Designed To Be Used In All Standard 4" Or 4 1/2" Angle Grinders With 5/8" As Well As M10 Arbor..
High Quality And Durability - Graff Wheel Is Made Of High Quality Carbon Steel That Provides A Higher Hardness And Longer Wear Life. Due To Its Carbon Steel Body, The Wheel Is Load-Resistant And Highly Durable..
Smooth Working - Because Of Hundreds Of Sharp Carbon Steel Teeth, The Shaping And Carving With Our Grinding Wheel Is Smooth And Accurate. Original Coating Of Graff Shaping Disc Creates A Fluid And Easy-To-Control Cutting Action..
Features
- APPLICATION - GRAFF The grinding wheel can be used for shaping, profiling, carving, notching, flattening and grinding of wood, softwood and hardwood, chipboard, laminate and even plastic. Should only be used for non-metallic materials.
- SMOOTH WORKING - Because of hundreds of sharp carbon steel teeth, the shaping and carving with our grinding wheel is smooth and accurate. Original coating of GRAFF shaping disc creates a fluid and easy-to-control cutting action.
- UNIQUE DESIGN - The disc is curved and lets you effortlessly level the high spots or adjust the uneven surfaces in a few fast passes.
- HIGH QUALITY AND DURABILITY - GRAFF wheel is made of high quality carbon steel that provides a higher hardness and longer wear life. Due to its carbon steel body, the wheel is load-resistant and highly durable.
- COMPATIBILITY - The grinding wheel is designed to be used in all standard 4 or 4 1/2 angle grinders with 5/8 as well as M10 arbor.
- See more on Amazon...
Brand: GRAFF | Manufacturer: OOO Lemanbel (LLC)
Dimensions: 0.04 x 4.50 x 4.50 Inches
See On Amazon #13
TRIM Cutting & Grinding Fluids SOL/1 General Purpose Emulsion, 1 gal Jug
Asin: B00065UGKS | Model: SOL/1 | PartNumber: SOL/1 | Ean: 0641238008361 | UPC: 641238008361
Leaves A Fluid, Nongumming Film To Prevent Sticky Ways, Chucks, Tool Holders, And Fixtures.
Easy Recycling Or Disposal With Conventional Techniques And Equipment.
Coolant Residue Is Easily Removed With Either Water, Working Solution, Or Aqueous Cleaners.
Wide Application Range - Production Surface And Centerless Grinding, Heavy-Duty Broaching, Gear Hobbing, And Replacing Straight Oil On Some Types Of Screw Machines.
Features
- Proven to be highly effective in controlling built-up edge (BUE)
- Wide application range - production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
- Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
- Coolant residue is easily removed with either water, working solution, or aqueous cleaners
- Easy recycling or disposal with conventional techniques and equipment
- See more on Amazon...
Brand: Trim | Manufacturer: Master Chemical Corporation
Dimensions: 11.90 x 7.30 x 4.10 inches
See On Amazon #14
Mist Coolant for Metal Cutting Applications | Fusion Cool 2255 | Premium Synthetic Metalworking Fluid (1 Gallon)
Asin: B0BXFSSL7H | Ean: 0860008523655 | UPC: 860008523655
Excellent Service In Most General-Purpose Flood Cooling Applications, Such As A Saw Coolant Or Cnc Mister. Direct Cross-Over/ Replacement For Kool Mist 77..
This Coolant Is Formulated With Biocides To Extend Sump Life And Effectively Reject Tramp Oil, And It Will Inhibit Corrosion With Dilutions As Low As 3%. Additionally, It Is A Safe And Mild Machine Coolant..
Common Applications Include Cnc Plasma Table, Bandsaws, Grinding, Milling, Turning, Drilling, And Other Cutting Operations..
It Is Particularly Useful Where Tool Pressure Is Exceptionally Great Or Where The Material Is Very Abrasive. Fusion Cool 2255 Provides The Extra Lubrication Needed To Protect The Cutting Edge Of The Tool..
Features
- This mist coolant is highly recommended for mist cooling any metal or alloy where tougher machining conditions require greater lubricity.
- It is particularly useful where tool pressure is exceptionally great or where the material is very abrasive. Fusion Cool 2255 provides the extra lubrication needed to protect the cutting edge of the tool.
- Excellent service in most general-purpose flood cooling applications, such as a saw coolant or CNC mister. Direct cross-over/ replacement for Kool Mist 77.
- Common applications include CNC plasma table, bandsaws, grinding, milling, turning, drilling, and other cutting operations.
- This coolant is formulated with biocides to extend sump life and effectively reject tramp oil, and it will inhibit corrosion with dilutions as low as 3%. Additionally, it is a safe and mild machine coolant.
- See more on Amazon...
Brand: Fusion Chemical | Manufacturer: Fusion Chemical
See On Amazon #15
TRIM MicroSol 455 Low-Foam Semisynthetic, Microemulsion Coolant 1-Gallon jug, MS455/1
Asin: B085M5HZ8K | Model: MS455/1 | PartNumber: MS455/1 | Ean: 0641238077237 | UPC: 641238077237
Provides Superior Corrosion Inhibition On Cast Iron And Eliminates Hot Chip" And Clinkering Problems".
Requires No Special Disposal Or Recycling.
Keeps Machines Very Clean While Leaving A Soft Fluid Film For Ease Of Cleaning And Reduced Maintenance.
Also For Machining Some Aluminum Alloys And Nonferrous Metals.
Features
- Low foaming for today's demanding high-pressure, high-volume applications
- Also for machining some aluminum alloys and nonferrous metals
- Provides superior corrosion inhibition on cast iron and eliminates hot chip and clinkering problems
- Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
- Requires no special disposal or recycling
- See more on Amazon...
Brand: Trim | Manufacturer: Master Fluid Solutions
Dimensions: 13.00 x 15.00 x 9.00 inches
See On Amazon #16
TRIM Cutting & Grinding Fluids E206N/1 Long Life Emulsion, 1 gal Jug
Asin: B00065UGMQ | Model: E206N/1 | PartNumber: E206N/1 | Ean: 0641238003052 | UPC: 641238003052
Compatible With All Ferrous And Nonferrous Materials.
Rejects Tramp Oil To Help Extend Sump Life And Increase Recycling Options.
Extremely Stable And Fine Emulsion To Reduce Carry Off And To Facilitate Getting The Fluid To The Point Of Cut.
Contains Highly Effective Extreme-Pressure Additives To Control Built-Up Edge.
Features
- Wide application range - production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
- Contains highly effective extreme-pressure additives to control built-up edge
- Compatible with all ferrous and nonferrous materials
- Extremely stable and fine emulsion to reduce carry off and to facilitate getting the fluid to the point of cut
- Rejects tramp oil to help extend sump life and increase recycling options
- See more on Amazon...
Brand: Trim | Manufacturer: Master Chemical Corporation
Weight: 0.01 pounds
See On Amazon #17
TRIM Cutting & Grinding Fluids MIST/1G Synthetic Misting Fluid, 1 gal Jug
Asin: B00065UD56 | Model: MIST/1G | PartNumber: MIST/1G | Ean: 0641238019954 | UPC: 641238019954
Has Superior Anti-Weld Action To Control Built-Up Edge And Chip Welding.
Compatible With Most Nonmetallic Materials.
Compatible With All Ferrous And Most Nonferrous Materials.
Keeps Grinding Wheels Clean And Free Of Loading.
Features
- Provides rapid and effective cooling
- Keeps grinding wheels clean and free of loading
- Has superior anti-weld action to control built-up edge and chip welding
- Compatible with all ferrous and most nonferrous materials
- Compatible with most nonmetallic materials
- See more on Amazon...
Brand: Trim | Manufacturer: Master Chemical Corporation
Weight: 0.00 Pounds
See On Amazon #18
Sawlution Sawlution.Pail Premium Sawing Coolant, 5 gal Pail, Blue
Asin: B00X6VB9EG | Model: Sawllution.Pail | PartNumber: Sawllution.Pail | Ean: 0791102618216 | UPC: 791102618216
Low Oil.
Superior Finish.
Excellent Corrosion Protection.
Brand: Sawlution | Manufacturer: Falcon Industial
See On Amazon #19
Advanced General Purpose Coolant for Cutting and Grinding Machine Shop Operations | Ultimate Human/Enviro Friendly | Fusion Hybrid Cool (1 Gallon)
Asin: B0BFP72T35 | Ean: 0860008523624 | UPC: 860008523624
Excellent Tramp Oil Rejection.
Great Sump Life - Low Odor And Mist.
Recyclable Coolant.
Worldclass Human Friendliness - Lowest Class Voc Output.
Features
- World Class Leading Super Ultimate Cooling Lubrication
- Worldclass human friendliness - Lowest class VOC output
- Excellent Tramp Oil Rejection
- Recyclable Coolant
- Great sump life - Low Odor and Mist
- See more on Amazon...
Brand: Fusion Chemical | Manufacturer: Fusion Chemical
See On Amazon
Looking For Something Else?
Search