OTC 6614 Heavy Duty Gear Puller
Asin: B00UCLSZOA | Model: 6614 | PartNumber: 6614 | Ean: 0731413590252 | UPC: 731413590252
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Slim Cross Block Design Gives More Room To Set Up In Tight Quarters For Increased Versatiliity.
8 Ton Rated, 8-3/8 Inch Crossbar Accepts Up To 5/8 Inch Diameter Bolts; Sliding Plates Ensure Smaller Gear Bolts, Up To 1/2 Inch Diameter, Are Always Centered; 5-3/4 Inch Long, 5/8-18, 3/4 Inch Drive Forcing Screw Has A Pulling Reach Of 3-1/4 Inches.
Tempered Steel, Rust Inhibitor-Coated 90Mm Long Bolts Are Graded 10.9 And Sized M12x1.75.
Rated At 8 Tons, This Puller Is Stout Enough For Almost Any Heavy-Duty Application And Includes A Pair Of Metric Bolts For Most Applications.
Features
- The OTC 6614 Heavy Duty Gear Puller will remove gears from 2 inches to 7-1/4 inches in diameter, including most cam gears
- Rated at 8 tons, this puller is stout enough for almost any heavy-duty application and includes a pair of metric bolts for most applications
- Slim cross block design gives more room to set up in tight quarters for increased versatiliity
- Tempered steel, rust inhibitor-coated 90mm long bolts are graded 10.9 and sized M12x1.75
- 8 ton rated, 8-3/8 inch crossbar accepts up to 5/8 inch diameter bolts; sliding plates ensure smaller gear bolts, up to 1/2 inch diameter, are always centered; 5-3/4 inch long, 5/8-18, 3/4 inch drive forcing screw has a pulling reach of 3-1/4 inches
- See more on Amazon...
First Available: 06/07/2023
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 10.25 x 5.50 x 1.50 inches | Weight: 4.22 Pounds
Warranty: Per Contract with Amazon
See On Amazon Similar To OTC 6614 Heavy Duty Gear
#1
OTC Tools 4530 Power Steering Pump Pulley Service Set
Asin: B000XSI96G | Model: 4530 | PartNumber: 4530 | Ean: 0731413039416, 0777780969703, 0073141303941 | UPC: 073141303941, 731413039416, 777780969703
A Complete Set Of Tools Required To Remove And Install Power Steering Pump Pulleys Of Most Domestic Vehicles. Fits Pulley Hubs With Diameters Of 1-1/8", 1-1/4", 1-5/16" And 1-3/8". Includes The Necessary Adapters For Servicing: Gm 3.1 L, 3100, 3400, And 3800 V6 Engines, Gm 2.3L Quad 4 Four-Cylinder Engines And Ford 4.6L, 5.4L, And 5.8L Modular V8 Engines. Housed In A Blow-Molded Storage Case To Protect And Organize Components..
Features
- AUTO_ACCESSORY
- A complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles. Fits pulley hubs with diameters of 1-1/8, 1-1/4, 1-5/16 and 1-3/8. Includes the necessary adapters for servicing: GM 3.1 L, 3100, 3400, and 3800 V6 engines, GM 2.3L Quad 4 four-cylinder engines and Ford 4.6L, 5.4L, and 5.8L modular V8 engines. Housed in a blow-molded storage case to protect and organize components.
- See more on Amazon...
First Available: 11/14/2007
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 1.60 x 7.30 x 9.20 Inches | Weight: 2.00 pounds
Warranty: One (1) year limited warranty
See On Amazon #2
OTC 6497 Pitman Arm Puller, Max. Spread 3 1/4 in
Asin: B0014DDIJC | Model: 6497 | PartNumber: 6497 | Ean: 0731413418624 | UPC: 731413418624
Manufacturer: Otc.
Country Of Manufacture: United States.
Brand: OTC | Manufacturer: OTC
Dimensions: 8.50 x 13.40 x 10.60 inches | Weight: 4.40 Pounds
Warranty: 1 year manufacturer
See On Amazon #3
OTC 6667 Harmonic Damper Puller
Asin: B000P6UT2I | Model: 6667 | PartNumber: 6667 | Ean: 0731413545085 | UPC: 731413545085
Country Of Manufacturer: Taiwan.
Package Dimensions: 8.9" L X 6.2" W X 2.2" H.
Manufacturer: Otc.
Features
- Hand Tools
- Manufacturer: Otc
- Country of Manufacturer: Taiwan
- Package Dimensions: 8.9 L x 6.2 W x 2.2 H
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 6.00 x 8.75 x 2.20 inches | Weight: 0.00 pounds
Warranty: Limited lifetime warranty
See On Amazon #4
OTC 6613 Variable Pin Spanner Wrench
Asin: B000F5JMEA | Model: 6613 | PartNumber: 6613 | Ean: 0088021748026, 0715466780921, 0638084481905, 0031113148013, 0031111200287, 0731413416859 | UPC: 638084481905, 731413416859, 715466780921, 088021748026, 031113148013, 031111200287
Use Wrench As-Is With It's Approximate 12 Inch Overall Length, Or For More Leverage, Use With A 1/2 Inch Drive Ratchet Or Breaker Bar.
Rugged Blow-Molded Storage Case Keeps Set Components Contained And Organized So They Are Ready To Use When You Need Them.
Set Includes The Following Pairs Of High-Strength Steel Pin Sizes: 3.5 Mm, 4 Mm, 4.5 Mm, 5 Mm, 6 Mm, 7 Mm, 10 Mm Plus A Heavy-Duty Steel Handle Assembly.
Wrench Is Adjustable From 1-1/4 Inches To 5 Inches By Loosening Single Adjustment Bolt.
Features
- OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more
- Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt
- Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar
- Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly
- Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.30 x 20.80 x 4.40 inches | Weight: 0.00 pounds
Warranty: Limited lifetime warranty
See On Amazon #5
OTC Puller Set, Bar, 5 Ton, 13 Pieces
Asin: B0002SR47M | Model: 4518 | PartNumber: 4518 | Ean: 0080850302127, 0731413039478, 0069060357172 | UPC: 080850302127, 069060357172, 731413039478
5 Inch Bar-Type Puller Head With Forcing Screw.
Blow-Molded Plastic Storage Case Keeps Set Contents Organized And Protected From Loss.
The 5 Inch Puller Cross-Bar With A 6-1/4 Inch Forcing Screw And Each Of The Bearing Separators May Be Used Separately Or In Combination With Other Pullers Or Tools.
Includes The Two Most Popular Bearing Splitters - 2 Inch And 3 Inch - Plus Four Sets Of Hex Push Puller Legs.
Features
- Separator tools are used with bar puller and legs for a wide variety of pulling jobs
- Includes the two most popular bearing splitters - 2 inch and 3 inch - plus four sets of hex push puller legs
- 5 inch bar-type puller head with forcing screw
- The 5 inch puller cross-bar with a 6-1/4 inch forcing screw and each of the bearing separators may be used separately or in combination with other pullers or tools
- Blow-molded plastic storage case keeps set contents organized and protected from loss
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 16.00 x 10.10 x 2.90 Inches | Weight: 0.01 pounds
Warranty: 1 Year
See On Amazon #6
OTC (7503) Tie Rod/inner bearing race puller Remover
Asin: B0002SRGTI | Model: 7503 | PartNumber: 7503 | Ean: 0731413011344 | UPC: 731413011344
Up To 5 Tons Of Force Can Be Applied.
Features
- Works on FWD and RWD import and domestic vehicles
- Up to 5 tons of force can be applied
- See more on Amazon...
First Available: 11/14/2007
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 2.50 x 12.00 x 6.00 inches | Weight: 2.65 pounds
Warranty: Limited lifetime warranty
See On Amazon #7
OTC (522) Large Gear and Pulley Puller
Asin: B000OQKJB0 | Model: 522 | PartNumber: 522 | Ean: 0080850302141, 0013438028683, 0731413005220, 0031113145821 | UPC: 031113145821, 013438028683, 080850302141, 731413005220
Forcing Screw Is 3/4 Inch-16 X 11-5/8 Inches Long.
Similar To Ford D80l-522-A And 303-D025.
Accommodates Any Cap Screw Up To 1/2 Inch Diameter.
Spread From 2 Inches To 7-3/4 Inches; Block Is 8-1/4 Inches Wide.
Features
- With OTC's 522 Large Gear and Pulley Puller you can easily remove a wide range of gears, pulleys or other parts that have tapped holes
- Spread from 2 inches to 7-3/4 inches; block is 8-1/4 inches wide
- Forcing screw is 3/4 inch-16 x 11-5/8 inches long
- Accommodates any cap screw up to 1/2 inch diameter
- Similar to Ford D80L-522-A and 303-D025
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 13.20 x 3.10 x 2.20 inches | Weight: 4.10 Pounds
Warranty: LIFETIME
See On Amazon #8
OTC 6698 Wheel Knuckle Vacuum Oil Seal Installer for Ford 2006 to Current F-450/550
Asin: B004FZCH70 | Model: 6698 | PartNumber: 6698 | Ean: 0731413548789 | UPC: 731413548789
Correctly Installs The Seal Onto The Axle Shaft And Into The Wheel Knuckle.
Rugged Construction Ensures Reliable Long-Term Service.
Seal Prevents Front Hub Vacuum Leaks That Would Cause The Vacuum Actuated Front Axle To Not Engage.
For Use On 2005 And Newer Ford F-450 And F-550 4X4s With Vacuum-Actuated Front Axles.
Features
- Ford Axle Shaft Seal Installer
- For use on 2005 and newer Ford F-450 and F-550 4X4s with vacuum-actuated front axles
- Correctly installs the seal onto the axle shaft and into the wheel knuckle
- Seal prevents front hub vacuum leaks that would cause the vacuum actuated front axle to not engage
- Rugged construction ensures reliable long-term service
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 8.00 x 9.00 x 11.80 inches | Weight: 10.80 Pounds
Warranty: Limited lifetime warranty
See On Amazon #9
OTC 4531 Harmonic Balancer Puller and Installer Set
Asin: B000F5LIW4 | Model: 4531 | PartNumber: 4531 | Ean: 0777780969451, 0731413039386 | UPC: 777780969451, 731413039386
For Easy Removal And Installation Of Most Harmonic Balancers And Drive Pulleys Which Are Press-Fitted Onto The Crank-Shaft..
Auto_Accessory.
Features
- For easy removal and installation of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft.
- AUTO_ACCESSORY
- For easy removal and installation of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft.
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.90 x 13.00 x 10.00 inches | Weight: 8.70 pounds
Warranty: 1 year manufacturer
See On Amazon #10
OTC 5070 Heavy-Duty Truck Clutch Alignment Tool - 10-Spline, 1-1/2" OD, 30 mm Pilot
Asin: B00063YIQI | Model: 5070 | PartNumber: 5070 | Ean: 0731413026799 | UPC: 731413026799
Rugged Construction Will Easily Support The Weight Of Heavy Clutch Discs.
1-1/2 Inch O.D. Shaft, 30 Mm Pilot, 10 Splines.
To Use, Loosely Install Clutch Disc And Pressure Plate On Flywheel Then Insert Alignment Tool Through The Clutch Into The Bearing, Center Disc, Then Tighten Pressure Plate To Spec.
Tool Is Constructed Of Lightweight Fiberglass-Reinforced Nylon That Won't Hang Up In Clutch Disc Splines.
Features
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 1-1/2 inch O.D. shaft, 30 mm pilot, 10 splines
- See more on Amazon...
First Available: 08/25/2011
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 18.00 x 4.00 inches | Weight: 0.29 Pounds
Warranty: Limited Lifetime Warranty
See On Amazon #11
OTC 4534 Multi Purpose Bearing and Pulley Puller Set
Asin: B00061SM9E | Model: 4534 | PartNumber: 4534 | Ean: 0731413040276 | UPC: 731413040276
Set Components Deliver A Spread Of 3 Inches To 5 Inches And A Reach Of 1 Inch To 2-1/4 Inches.
Durable Blow-Molded Plastic Storage Case That Keeps Set Components Contained And Organized So They Are Ready For Use When Needed.
Kit Includes 2 Ea. Forcing Screws (Live Center), 2 Ea. Cross-Bar Yokes, 2 Ea. Clamp Bolts, 3 Pairs Of Puller Jaws, 1 Pair Of Jaw Pins With Ball Spring, And 3 Pairs Of Capped Bolts.
Drop-Forged Components Can Be Used In A Variety Of Combinations.
Features
- For a wide range of pulling jobs including: bearings; alternator, generator, power steering, and crankshaft pulleys; timing gears; harmonic balancers; and more
- Drop-forged components can be used in a variety of combinations
- Set components deliver a spread of 3 inches to 5 inches and a reach of 1 inch to 2-1/4 inches
- Kit includes 2 ea. forcing screws (live center), 2 ea. cross-bar yokes, 2 ea. clamp bolts, 3 pairs of puller jaws, 1 pair of jaw pins with ball spring, and 3 pairs of capped bolts
- Durable blow-molded plastic storage case that keeps set components contained and organized so they are ready for use when needed
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 10.80 x 13.60 x 3.00 inches | Weight: 9.20 pounds
See On Amazon #12
OTC 7480 Heavy-Duty Truck Clutch Alignment Tool - 10-Spline, 1-3/4" OD, 1" Pilot
Asin: B0029XLPVE | Model: 7480 | PartNumber: 7480 | Ean: 0731413004674, 0777780883900 | UPC: 731413004674, 777780883900
Rugged Construction Will Easily Support The Weight Of Heavy Clutch Discs.
1-3/4 Inch O.D. Shaft, 1 Inch Pilot, 10 Splines; Similar To Ford 308-D010 (D93t-7550-A).
To Use, Loosely Install Clutch Disc And Pressure Plate On Flywheel Then Insert Alignment Tool Through The Clutch Into The Bearing, Center Disc, Then Tighten Pressure Plate To Spec.
Tool Is Constructed Of Lightweight Fiberglass-Reinforced Nylon That Won't Hang Up In Clutch Disc Splines.
Features
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines; similar to Ford 308-D010 (D93T-7550-A)
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.20 x 18.70 x 3.00 inches | Weight: 0.55 Pounds
Warranty: Limited lifetime warranty
See On Amazon #13
OTC Axle Installer, 1 Pc
Asin: B004FZ5ZJC | Model: 6697 | PartNumber: 6697 | Ean: 0731413548796 | UPC: 731413548796
Made In: China.
Package Dimensions: 11.8" L X 8.1" W X 8.9" H.
Manufacturer: Otc.
Features
- Fleet and Vehicle Maintenance
- Manufacturer: Otc
- Made in: China
- Package Dimensions: 11.8 L x 8.1 W x 8.9 H
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 8.50 x 11.30 x 8.30 Inches | Weight: 11.00 Pounds
Warranty: Limited lifetime warranty
See On Amazon #14
OTC 6024 Crankshaft Positioning Tool for Ford, Black
Asin: B000F5ECRM | Model: 6024 | PartNumber: 6024 | Ean: 0731413032554, 0799621067768 | UPC: 799621067768, 731413032554
Preventing Timing Misalignment On These 'Interference' Design Ford Engines Is Critical As Valves Will Contact Pistons If Timing Chain Is Installed In An Incorrect Position, Resulting In Severe Damage.
Otc Recommends (But Does Not Require) That The No. 6024 Crankshaft Alignment Tool Be Used With Nos. 6009 And 6020 Camshaft Alignment Tools To Safeguard Alignment When Servicing Cams Or Chains.
Simply Install Crankshaft Positioning Tool Over Crankshaft Snout (Aligning Crankshaft Woodruff Key With Keyway On Tool) And Engine Front Cover Alignment Dowel To Correctly Position Crank At Tdc.
Handy Tool Prevents Accidental Movement Of The Crankshaft When Doing Camshaft Or Timing Chain Service Or Installation On These 'Interference' Engines.
Features
- OTC Crankshaft Positioning Tool for use on 1993 and newer Ford 4.2L V6; 4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines - same as Ford No. 303-448
- Handy tool prevents accidental movement of the crankshaft when doing camshaft or timing chain service or installation on these 'interference' engines
- Preventing timing misalignment on these 'interference' design Ford engines is critical as valves will contact pistons if timing chain is installed in an incorrect position, resulting in severe damage
- Simply install crankshaft positioning tool over crankshaft snout (aligning crankshaft woodruff key with keyway on tool) and engine front cover alignment dowel to correctly position crank at TDC
- OTC recommends (but does not require) that the No. 6024 Crankshaft Alignment Tool be used with Nos. 6009 and 6020 Camshaft alignment tools to safeguard alignment when servicing cams or chains
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.50 x 7.75 x 4.25 Inches | Weight: 0.70 pounds
Warranty: LIFETIME
See On Amazon #15
OTC 1929 6-Lug Tubular Spanner Wrench for Wheel Bearing Locknuts on Chevrolet/GMC Heavy Duty Axles
Asin: B000XSGKXA | Model: 1929 | PartNumber: 1929 | Ean: 0731413029530, 0731413019296 | UPC: 731413019296, 731413029530
For Use When Servicing Chevrolet And Gmc 5,200 To 7,200 Lb. Axles.
Socket Has A 2-5/8 Inch O.D..
Heavy-Duty Tool Is Designed For Use With A 3/4 Inch Square-Drive Ratchet Or Breaker Bar.
Features
- OTC's Six-Lug Tubular Spanner-Type Wrench removes and installs rear wheel bearing locknuts on heavy-duty axles
- Heavy-duty tool is designed for use with a 3/4 inch square-drive ratchet or breaker bar
- For use when servicing Chevrolet and GMC 5,200 to 7,200 lb. axles
- Socket has a 2-5/8 inch O.D.
- See more on Amazon...
First Available: 11/14/2007
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 1.00 x 2.50 x 2.50 inches | Weight: 0.00 Pounds
Warranty: Limited lifetime warranty
See On Amazon #16
OTC (7311A) Pitman Arm Puller
Asin: B0002SRGHK | Model: 7311A | PartNumber: 7311A | Ean: 0731413038402 | UPC: 731413038402
Two Clamp Bolts Lock The Jaws On The Pitman Arm Ensuring A Solid Grip.
For Cars And Light Trucks With A Maximum Jaw Spread Is 2-1/8 Inches.
Includes An Adapter For Added Versatility And Both Pullers Cover A Variety Of Pulling Jobs.
Adjustable And Have Rugged Forged Jaws Shaped To Fit The Job.
Features
- This puller is designed for the toughest pitman arm jobs
- Adjustable and have rugged forged jaws shaped to fit the job
- Two clamp bolts lock the jaws on the pitman arm ensuring a solid grip
- Includes an adapter for added versatility and both pullers cover a variety of pulling jobs
- For cars and light trucks with a maximum jaw spread is 2-1/8 inches
- See more on Amazon...
First Available: 11/14/2007
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 4.80 x 6.40 x 2.60 inches | Weight: 3.00 pounds
Warranty: Limited lifetime warranty
See On Amazon #17
OTC 7073A Heavy-Duty Truck Clutch Alignment Tool - 10-Spline, 1-3/4" OD, 1-1/4" Pilot
Asin: B00063YIKO | Model: 7073A | PartNumber: 7073A | Ean: 0731413005206 | UPC: 731413005206
Rugged Construction Will Easily Support The Weight Of Heavy Clutch Discs.
1-3/4 Inch O.D. Shaft, 1-1/4 Inch Pilot, 10 Splines, Splines Are 3.75 Inches Long; Similar To Ford 308-D002 (D79t-7550-B).
To Use, Loosely Install Clutch Disc And Pressure Plate On Flywheel Then Insert Alignment Tool Through The Clutch Into The Bearing, Center Disc, Then Tighten Pressure Plate To Spec.
Tool Is Constructed Of Lightweight Fiberglass-Reinforced Nylon That Won't Hang Up In Clutch Disc Splines.
Features
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 1-3/4 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.75 inches long; similar to Ford 308-D002 (D79T-7550-B)
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.00 x 18.60 x 4.11 inches | Weight: 0.70 Pounds
Warranty: Limited lifetime warranty
See On Amazon #18
OTC 4722 Stinger Heavy-Duty CV Boot Clamp Installer
Asin: B005J3L4BW | Model: 4722 | PartNumber: 4722 | Ean: 0731413041648 | UPC: 731413041648
Ensures Even Precise Crimping And Eliminates Possibility Of Damage To The Clamp Boot Or Hose.
May Also Be Used To Crimp The Clamps Used On Fuel And Cooling System Hoses.
Features
- Designed to clamp the ear-type CV boot clamps used on front-wheel drive vehicles
- May also be used to crimp the clamps used on fuel and cooling system hoses
- Ensures even precise crimping and eliminates possibility of damage to the clamp boot or hose
- See more on Amazon...
First Available: 08/25/2011
Brand: OTC | Manufacturer: OTC
Dimensions: 1.00 x 6.00 x 2.50 inches | Weight: 1.40 Pounds
Warranty: One Year Limited Warranty
See On Amazon #19
OTC (1513B) 4 Ton Collision Repair Set
Asin: B001BFS4TC | Model: 1513B | PartNumber: 1513B | Ean: 0731413545887 | UPC: 731413545887
Components Snap Together For Quick Setups To Apply Pushing, Spreading, Or Pulling Force.
Components Include: Hydraulic Pump, Hose, And Ram; Ram Flat Base; Extension Tubes (4); 1/2-Ton Spreader; Tube Coupling; Ram Toe; Wedge Head; Serrated Saddle; Flex Head; Plunger Toe; 90° Wedge Head; Storage Case.
Very Competitively Priced, Yet High Quality Set That Includes A Single-Speed Hydraulic Hand Pump, Hose, And Ram.
Features
- 4 ton capacity
- Very competitively priced, yet high quality set that includes a single-speed hydraulic hand pump, hose, and ram
- Components snap together for quick setups to apply pushing, spreading, or pulling force
- Components include: hydraulic pump, hose, and ram; ram flat base; extension tubes (4); 1/2-ton spreader; tube coupling; ram toe; wedge head; serrated saddle; flex head; plunger toe; 90 wedge head; storage case
- See more on Amazon...
Brand: OTC | Manufacturer: Sunpro
Dimensions: 7.00 x 23.90 x 13.50 inches | Weight: 0.10 Pounds
Warranty: 1 year manufacturer
See On Amazon #20
OTC Puller Set, 11 Pieces, Multipurpose, 2 Jaws - 4532
Asin: B002TYT4JS | Model: 4532 | PartNumber: 4532 | Ean: 0731413549304, 0080850337198 | UPC: 080850337198, 731413549304
Features A Classic 'H Bar' Style Puller Block Accommodating A 7 Inch To 11 Inch Application Spread.
Tempered For Heavy-Duty Applications ; Durable Blow-Molded Storage Case Keeps Tools Contained And Organized So They Are Ready When You Need Them.
Comes With 2 Sets Of Forged Jaws For A Pulling Reach Range Of 5 Inches To 9 Inches; Two Forcing Screws Are Included For Short And Long Pulls.
Great Solution For Many Applications Like: Heavy-Duty Pinion Bearings, Side Bearings, Alternators, Generators, Power Steering And Crankshaft Pulleys, Timing Gears, Harmonic Balancers, And More.
Features
- Push puller is the best pulling choice when threaded holes are not available
- Great solution for many applications like: heavy-duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, harmonic balancers, and more
- Features a classic 'H Bar' style puller block accommodating a 7 inch to 11 inch application spread
- Comes with 2 sets of forged jaws for a pulling reach range of 5 inches to 9 inches; two forcing screws are included for short and long pulls
- Tempered for heavy-duty applications ; durable blow-molded storage case keeps tools contained and organized so they are ready when you need them
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 2.00 x 17.50 x 12.00 inches | Weight: 8.10 Pounds
Warranty: One year limited warranty
See On Amazon
Looking For Something Else?
Search