The 8051 Microcontrollers: Internals, Instructions, Programming &Interfacing, 2/e
Asin: B00Y5XYQKI
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
See On Amazon Similar To The 8051 Microcontrollers Internals Instructions
#1
USB Universal Programmer for TL866II EEPROM Flash 8051 AVR MCU GAL PIC Update Tool with 9 Adapter
Asin: B07KPJZCWT | Ean: 0794419441348 | UPC: 794419441348
Package Included: 1 X Tl866iii Programmer, 1 X Connect Cable, 9 X Adapters, 1 X Contact Pin, 1 X Test Clip..
Unique Interface: Unique Serial Programming Icsp Interface, Supporting Serial Download And High-Speed Parallel High-Voltage Programming. Note: The Tl866cs Does Not Support Icsp Interface Programming..
Protection: Best Internal 40 Pin Over Voltage Protection, The Strongest Vcc/Vpp 4-Level Overcurrent Protection. The Short-Circuit Do Not Reset The Pc..
Eprom Programmer Support: Wide Range Of Chip 15000+ Support, Support For Serial And Parallel Series 40/44/48Pin Large Capacity Flash..
Features
- GOOD FEATURE: The minimum volume and the lowest power consumption and do not feel any heat in process. All chips do not need external power supply, the low power consumption of its own to ensure that the USB port can provide enough power.
- EPROM PROGRAMMER SUPPORT: Wide range of chip 15000+ support, support for serial and parallel series 40/44/48PIN large capacity FLASH.
- PACKAGE INCLUDED: 1 x TL866III Programmer, 1 x Connect Cable, 9 x Adapters, 1 x Contact Pin, 1 x Test Clip.
- PROTECTION: Best internal 40 pin over voltage protection, the strongest VCC/VPP 4-level overcurrent protection. The short-circuit do not reset the PC.
- UNIQUE INTERFACE: Unique serial programming ICSP interface, supporting serial download and high-speed parallel high-voltage programming. Note: The TL866CS does not support ICSP interface programming.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 1.18 x 3.94 x 2.36 inches
See On Amazon #2
JESSINIE 2Pcs C8051F300 MCU Single Chip Microcontroller Development Board Mixed Signal ISPFLASH Microcomputer Module Board CJMCU-8051 Industrial Control Module
Asin: B0BBLY7FX8 | Model: C851F3 | PartNumber: C851F3
The C8051f320 Microcontroller Has A Full-Duplex Uart With Extended Baud Rate Configuration, 256 Bytes Of Internal Ram, 128 Bytes Of Spe-Critical Function Register (Sfr) Address Space And A Byte-Wide I/O Port..
With 8-Bit Adc ('F300/2 Only), Up To 500 Ksps, Up To 8 External Inputs.
Supply Voltage 2.7 To 5 V, Typical Operating Current: 6.6 Ma @ 25 Mhz; 14 Μa @ 32 Khz, Typical Stop Mode Current: 0.1 Μa.
The Cip-51 Core Provides All The Peripherals That Come With The Standard 8052, Including Two Standard 16-Bit Counters/Timers, And An Enhanced 16-Bit Counter/Timer Input With An External Oscillator.
Features
- The C8051F300/1/2/3/4/5 series utilizes Silicon Labs proprietary CIP-51 microcontroller cores. CIP-51 are fully compatible with MCS-51M instruction sets; Standard 803x / 805x assemblers and compilers can be used to develop software
- The CIP-51 core provides all the peripherals that come with the standard 8052, including two standard 16-bit counters/timers, and an enhanced 16-bit counter/timer input with an external oscillator
- The C8051F320 microcontroller has a full-duplex UART with extended baud rate configuration, 256 bytes of internal RAM, 128 bytes of Spe-Critical Function Register (SFR) address space and a byte-wide I/O port.
- Supply Voltage 2.7 to 5 V, Typical operating current: 6.6 mA @ 25 MHz; 14 A @ 32 kHz, Typical stop mode current: 0.1 A
- With 8-Bit ADC ('F300/2 only), Up to 500 ksps, Up to 8 external inputs
- See more on Amazon...
Brand: JESSINIE | Manufacturer: JESSINIE
Dimensions: 0.70 x 7.08 x 4.72 inches
See On Amazon #3
CANADUINO Digital LED Clock 6-Digit, DIY kit Based on AT89C2051
Asin: B07F1KMT8B | Model: N.A. | PartNumber: N.A. | Ean: 4260474032334
Pcb Dimension 70 X 90 X15 Mm.
No Instructions Available, But Super Easy To Build Since Parts Are Clearly Printed On The Pcb..
Power Supply 9-12V Extern (Or 5V Internal).
Easy To Build Diy Kit, Schematic In English.
Features
- 6 Digit LED Clock DIY kit
- easy to build DIY kit, schematic in English
- PCB dimension 70 x 90 x15 mm
- power supply 9-12V extern (or 5V internal)
- No instructions available, but super easy to build since parts are clearly printed on the PCB.
- See more on Amazon...
Brand: CANADUINO | Manufacturer: UNIVERSAL-SOLDER Electronics
Dimensions: 0.75 x 3.94 x 3.54 inches | Weight: 0.09 pounds
See On Amazon #4
8051 Microcontrollers, 2/e: Internals, Instructions, Programming &Interfacing,
Asin: B00Q8L2J0Y
First Available: 04/01/2014
Manufacturer: Pearson
See On Amazon #5
8051 Microcontroller: Internals, Instructions, Programming and Interfacing (Old Edition)
Asin: B00CDIDKAY
First Available: 02/25/2010
Manufacturer: Pearson
See On Amazon
Looking For Something Else?
Search