YG-1 EMD60040 Carbide V7 Mill INOX End Mill, 4 Flute, Stub Length, 3" Length, 5/8"
Asin: B012FTIFQY | Model: EMD60040 | PartNumber: EMD60040
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates
- See more on Amazon...
First Available: 05/15/2017
Brand: YG-1 | Manufacturer: YG-1
See On Amazon Similar To YG1 EMD60040 Carbide V7 Mill
#1
YG-1 28593 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 3" Length, 1/2"
Asin: B0080AVYFW | Model: 28593 | PartNumber: 28593 | Ean: 0312333756494 | UPC: 312333756494
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1
Dimensions: 0.04 x 3.00 x 0.50 inches
See On Amazon #2
YG-1 E5974 Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 50 Deg Helix, 2 Flutes, 3" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080HBGX0 | Model: 37593 | PartNumber: 37593 | Ean: 0768413467369 | UPC: 768413467369
50-Degree Helix Offers Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Stub Length Cutting Edges Increase The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for high-performance machining on aluminum, stainless steel, and copper
- Stub length cutting edges increase the strength of the tool, making it less likely to break in the workpiece
- 50-degree helix offers increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.15 Pounds
See On Amazon #3
YG-1 E5975 Carbide Ball Nose End Mill, Coolant Through, Uncoated (Bright) Finish, 40 Deg Helix, 3 Flutes, 2.375" Overall Length, 0.125" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080HA43I | Model: 38601 | PartNumber: 38601 | Ean: 0768413467444 | UPC: 768413467444
40-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum, stainless steel, and copper
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 40-degree helix provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #4
YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 4" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080BKHQ8 | Model: 36593TC | PartNumber: 36593TC
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Titanium Carbon Nitride (Ticn) Coating Lubricates The End Mill For High-Temperature Stability And Offers Better Abrasion Resistance Than Uncoated Tools.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than uncoated tools
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.30 Pounds
See On Amazon #5
YG-1 E5062 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080D39DO | Model: 53593 | PartNumber: 53593 | Ean: 5915903873628
Four Flutes Produce A Better Finish Than Fewer Flutes.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #6
YG-1 - 55579 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4" Overall Length, 0.3125" Cutting Diameter, 0.3125" Shank Diameter
Asin: B0080C5EPG | Model: 55579 | PartNumber: 55579
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 Pounds
See On Amazon #7
YG-1 EMB13008 Carbide V7 Mill INOX Corner Radius End Mill, 4 Flute, Regular Length, 1-1/2" Length, 1/8"
Asin: B0080ATMVA | Model: EMB13008 | PartNumber: EMB13008
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #8
YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 4" Overall Length, 0.4375" Cutting Diameter, 0.4375" Shank Diameter
Asin: B0080BK81M | Model: 36588 | PartNumber: 36588
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.25 pounds
See On Amazon #9
YG-1 - 9338 E2175 Cobalt Steel Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 6 Flutes, 6.125" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080D64G8 | Model: 09338 | PartNumber: 09338 | Ean: 0798167799126 | UPC: 798167799126
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Six Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Six flutes produce a better finish than fewer flutes
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.90 Pounds
See On Amazon #10
YG-1 E5978 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080HAEHY | Model: 89573 | PartNumber: 89573
37-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- 37-degree helix provides increased cutting action and chip evacuation compared to lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.30 Pounds
See On Amazon
Looking For Something Else?
Search