Rectorseal 87734 Wall Bracket Condenser Stand, Silver
Asin: B014XAWGZ4 | Model: 87734 | PartNumber: 87734 | Ean: 0021449877343 | UPC: 021449877343
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.300 Lb Capacity.
This Is An Aftermarket Of Generic Part.
Sliding Cross Bar For Exceptional Equipment Width Range.
Features
- Made from heavy duty stainless steel
- Sliding cross bar for exceptional equipment width range
- 300 Lb capacity
- This is an aftermarket of generic part
- See more on Amazon...
Brand: Rectorseal | Manufacturer: The Rectorseal Corporation
Dimensions: 18.00 x 22.00 x 33.50 inches
See On Amazon Similar To Rectorseal 87734 Wall Bracket Condenser
#1
ICOOL Mini Split Wall Mounting Bracket for 9000-36000 BTU Universal Ductless Air Conditioners, Heat Pumps, Compressors & HVAC Systems, Outdoor Heavy Duty Foldable Wall Mount Condenser Bracket
Asin: B0855KQZZP | Ean: 0644925534006 | UPC: 644925534006
【Outstanding Features】Exclusive Built-In Spirit Level Helps You Correct Mounting Slope Position. Angle Regulators Mounted On The Vertical Arms Help You Adjust The Distance Between The Bracket And The Wall. Bolts And Anti-Vibration Pads Provided Help You Optimize The Safety And Stability Of Mini Split Condensing Unit Installation..
【All Hardware Included】Breezy Installation And Versatility, Assembly Is Easy Enough. All Necessary Hardware Included, Please Refer To Our Instructions Provided. (If Any Accessories Missing When You Receive The Wall Mount Air Conditioner Bracket, Although It Is A Small Probability Event, Please Feel Free To Contact Us At Any Time..
【Preparation Matters】Please Check To Ensure Clearance Requirements Are Being Met For Your Mini Split Unit. Keep Your Mini Split Elevated, Protect From Dirt, Snow, Debris, Floods, Vandalism, Grass-Clippings, Etc. Great For All Climates..
Attention: Install Concrete Anchors Into The Position Of Both Sides Of The Crossbeam And Into Vertical Arms To Stabilize The Bracket And Increase Load-Bearing Capacity..
【Heavy Duty Design】Made Of High-Quality Heavy Duty Steel Which Is Galvanized And Epoxy Painted, Our Mini Split Bracket Features One Cross Bar And Two Foldable L-Shaped Brackets. Triangle Stiffeners Design Enhances The Structure For Long Term Stability..
Features
- Good Compatibility Compatible with most mini split air conditioners, adjustable for use with up to 9,000 - 36,000 BTU units, like universal mini split, ductless air conditioner, heat pumps, AC compressors & HVAC systems, can withstand weights exceeding 330LBS.
- Heavy Duty Design Made of high-quality heavy duty steel which is galvanized and epoxy painted, our mini split bracket features one cross bar and two foldable L-shaped brackets. Triangle stiffeners design enhances the structure for long term stability.
- Outstanding Features Exclusive built-in spirit level helps you correct mounting slope position. Angle regulators mounted on the vertical arms help you adjust the distance between the bracket and the wall. Bolts and anti-vibration pads provided help you optimize the safety and stability of mini split condensing unit installation.
- Attention: Install concrete anchors into the position of both sides of the crossbeam and into vertical arms to stabilize the bracket and increase load-bearing capacity.
- All Hardware Included Breezy installation and versatility, assembly is easy enough. All necessary hardware included, please refer to our instructions provided. (If any accessories missing when you receive the wall mount air conditioner bracket, although it is a small probability event, please feel free to contact us at any time.
- Preparation Matters Please check to ensure clearance requirements are being met for your mini split unit. Keep your mini split elevated, protect from dirt, snow, debris, floods, vandalism, grass-clippings, etc. Great for all climates.
- See more on Amazon...
Brand: ICOOL | Manufacturer: Akfactory
Dimensions: 14.76 x 30.70 x 21.60 inches | Weight: 9.00 pounds
See On Amazon #2
TAKTOPEAK Mini Split Wall Mount Bracket Air Conditioner Condenser Bracket for 7000 BTU to 24000 BTU
Asin: B085XB34SB | Ean: 0763032553011 | UPC: 763032553011
Full Outfit & Easy Install-This Mini Split Wall Bracket Contains All Hardware For Fixing Ac Units, Including A Pair Of Folded Brackets, 1 X Crossbar, 5 X Tapping Screws & Inserts, 4 X Anti-Vibration Pads, 2 X Self-Locking Screws. Most Components Are Already Preassembled In The Brackets, Making You A Quick Installation..
Great Protection-Our Compressor Bracket Is Designed To Keep Your Mini Split Elevated, Away From Dirt, Grass-Clippings, Snow, Debris, Floods And Other Perils..
Vibration & Noise Minimized-4 Rubber Pads Are Designed To Minimize The Transmission Of Vibration From The Unit To The Mini Split Bracket..
Great Applicability & 2 Sizes Available-Our Wall Mount For Mini Split Fits For Most Brand, Size, Model And Capacity Of Air Conditioner Units. 2 Sizes Are For Your Option, One Size Is For Most 7000-12000 Btu, And The Other Is For Most 18000-24000 Btu And Can Support Up To 400Lbs And 485Lbs Respectively..
Features
- Heavy Duty & Galvanized Steel-Our mini split wall mounting brackets are made of high-quality heavy duty steel which is galvanized and power painted. Safety-guaranteed, doule rust-proof, and durable.
- Great Applicability & 2 Sizes Available-Our wall mount for mini split fits for most brand, size, model and capacity of air conditioner units. 2 sizes are for your option, one size is for most 7000-12000 BTU, and the other is for most 18000-24000 BTU and can support up to 400lbs and 485lbs respectively.
- Full Outfit & Easy Install-This mini split wall bracket contains all hardware for fixing AC units, including a pair of folded brackets, 1 x crossbar, 5 x tapping screws & inserts, 4 x anti-vibration pads, 2 x self-locking screws. Most components are already preassembled in the brackets, making you a quick installation.
- Vibration & noise minimized-4 rubber pads are designed to minimize the transmission of vibration from the unit to the mini split bracket.
- Great Protection-Our compressor bracket is designed to keep your mini split elevated, away from dirt, grass-clippings, snow, debris, floods and other perils.
- See more on Amazon...
Brand: TAKTOPEAK | Manufacturer: TAKTOPEAK
Weight: 4.85 Pounds
See On Amazon #3
Popmoon Wall Mounting AC Brackets up to 440lb/200kg Split Air Conditioner Bracket 21 5/8"Lx16"H Bracket Air Conditioner Bracket Set Adjustble 9000 Btu to 36000 Btu
Asin: B07Z9JHDT5 | Ean: 7446123895285
Condenser Protection - Raises The Compressor Unit Above Ground For Protection From Dirt, Debris, Snow, Floods, Vandalism, Etc. Are Perpendicular To Each Other When Condenser Leveling.
Widely Application - This Shelf Bracket Also Make A Workstation In Your Garage, Bench In Your Backyard, Clothes Table In Laundry Room, Bookshelf, Kitchen Shelf, Exhibition Stand, Garden Shelf, External Wall Brackets Etc.
Easy Installation - The Shelf Brackets Are Easy To Mount Just Make Sure They Are Straight On The Studs When You Do Mount Them. Comes With Mounting Accessories, High Quality Screws And Top Quality Anchors.
Anti-Rust & Durable - Solid And Rust Stainless Steel Material Could Offer A Longer Service Life,No Paint Off, More Durable.
Features
- STRONG ENOUGH, HOLDS A LOT OF WEIGHT - Measurement: 26 5/8" Long * 16" High; The size of sleeve anchors is 2 5/8"x M8. Triangle structure, holds a good amount of weight, supports up to 440lb/200kg. Could be used to Support A/C BTU ratings of: 9000 Btu to 36000 Btu
- ANTI-RUST & DURABLE - Solid and Rust Stainless Steel material could offer a longer service life,no paint off, more durable
- CONDENSER PROTECTION - Raises the compressor unit above ground for protection from dirt, debris, snow, floods, vandalism, etc. are perpendicular to each other when condenser leveling
- EASY INSTALLATION - The shelf brackets are easy to mount just make sure they are straight on the studs when you do mount them. Comes with mounting accessories, High quality screws and top quality anchors
- WIDELY APPLICATION - This shelf bracket also make a workstation in your garage, bench in your backyard, clothes table in laundry room, bookshelf, kitchen shelf, exhibition stand, Garden Shelf, External Wall Brackets etc
- See more on Amazon...
Brand: POPMOON | Manufacturer: POPMOON
See On Amazon #4
JEACENT Wall Mounting Bracket Rust Free Stainless Steel Support for 9000-24000BTU Condenser Ductless Mini Split Air Conditioner Heat Pump Systems
Asin: B07TMWKCRZ
😀Function - Raises The Condensing Unit Above Floor For Protection From Dirt, Snow, Debris, Floods And Other Perils..
😀Easy To Install - Assemble Easy Enough, Only Bracket Screws Included, All The Mounting Hardware Included. Us Patent Pending. All Rights Reserved..
😀Damping Capacity - Reliable Rubber Vibration For Shock Absorption And Correct Distance From The Wall For Air Flow..
😀High Quality - Made Of Solid Thick Stainless Steel Material For Longer Service Life..
Features
- Universal Design - Adjustable for use with up to 9,000 - 24,000 BTU Units of maximum weight capacity up to 360 lb (Wall mounting hardware INCLUDED)).
- High Quality - Made of solid thick stainless steel material for longer service life.
- Function - Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
- Damping Capacity - reliable rubber vibration for shock absorption and correct distance from the wall for air flow.
- Easy to Install - Assemble easy enough, ONLY bracket screws included, all the mounting hardware included. US Patent Pending. All Rights Reserved.
- See more on Amazon...
Brand: JEACENT | Manufacturer: Jeacent Innovation
See On Amazon #5
Mini Split Wall Mounting Bracket for 7000-18000 BTU Outdoor Condenser Ductless Universal Air Conditioner and Heat Pump System Support up to 330 lbs
Asin: B0CDGH85N1
Easy To Install: The Wall Mounting Bracket Includes A Horizontal Crossbar, Allow You To Measure And Position Your Bracket Accurately. All Mounting And Assembly Hardware Is Included..
Guarantee: Your Satisfaction Is Our Priority, If You Have Any Quality Problems On Our Mini Split Wall Mounting Bracket, Please Feel Free To Contact Us..
Condenser Protection: A Minimum 5'' Clearance Is Provided For Easy Air Flow As Needed For Condensing Operation. Keep Your Ac Compressor High Above Ground To Protect Against Water Flooding, Snow, Dirt And Debris..
Durable Bracket: The Mini Split Mounting Bracket Features A Galvanized And Epoxy Paint Finish, Which Provides A Matte Surface To Prevent The A/C Unit From Falling Off The Wall..
Features
- UNIVERSAL DESIGN: Wall mounting bracket is compatible with almost all major brands of wall-mounted spit air conditioner heat pump systems. It is adjustable to support mini split systems ranging from 7,000 BTU to 18,000 BTU, able to support the weight up to 330 lbs.
- DURABLE BRACKET: The mini split mounting bracket features a galvanized and epoxy paint finish, which provides a matte surface to prevent the A/C unit from falling off the wall.
- EASY TO INSTALL: The wall mounting bracket includes a horizontal crossbar, allow you to measure and position your bracket accurately. All mounting and assembly hardware is included.
- CONDENSER PROTECTION: A minimum 5'' clearance is provided for easy air flow as needed for condensing operation. Keep your AC compressor high above ground to protect against water flooding, snow, dirt and debris.
- GUARANTEE: Your satisfaction is our priority, if you have any quality problems on our mini split wall mounting bracket, please feel free to contact us.
- See more on Amazon...
Brand: Kxuhivc | Manufacturer: Kxuhivc
See On Amazon #6
Wall Mounting Bracket for Outdoor Condenser Universal Mini Split Heat Pump Systems Support Brackets Support up to 440 lbs (9000-36000BTU)
Asin: B0CPLJ48H1 | Model: MINI SPLIT BRACKET | PartNumber: MINI SPLIT BRACKET
Universal: Compatible With Most Wall Mounted Mini Split Air Conditioners Heat Pump Systems With 9,000-36,000 Btu, Supporting Up To 400 Lbs. Fits All Brands Air Conditioner Split System Outdoor Condensing And Outdoor Heat Pump Units..
Size: 36" Cross Bar, 18.1" Long Vertical Rail, 21.6" Long Support Bracket,Slight Rearward Tilt To Wall Is Recommended For Safety Purposes Universal Heavy Duty Design.
Package Include: All Necessary Hardware Is Provided, The Seven-Hole Rubber Pads Are Designed To Minimize The Vibration And Noise From The Condensing Unit, The Crossbar Is Designed For Easier Installation And More Stable.
Installation Notes: A Minimum 5'' Clearance Is Provided For Easy Airflow As Needed For Condenser Operation(Minimum Clearance 5'' For Wall Mount, 12'' For Floor Mount).
Features
- Material: Galvanized steel with powder-coating surface treatment, anti-rusting and weather-proof, perfect for outdoor application. Installing this bracket can keep the condenser clean and extend service life.
- Installation Notes: A minimum 5'' clearance is provided for easy airflow as needed for condenser operation(minimum clearance 5'' for wall mount, 12'' for floor mount)
- Universal: Compatible with most wall mounted mini split air conditioners heat pump systems with 9,000-36,000 BTU, supporting up to 400 lbs. Fits all brands air conditioner split system outdoor condensing and outdoor heat pump units.
- Package Include: All necessary hardware is provided, the seven-hole rubber pads are designed to minimize the vibration and noise from the condensing unit, the crossbar is designed for easier installation and more stable
- Size: 36 cross bar, 18.1 long vertical rail, 21.6 long support bracket,Slight rearward tilt to wall is recommended for safety purposes Universal Heavy Duty Design
- See more on Amazon...
Brand: GUEQUITLEX | Manufacturer: dengyue
Dimensions: 2.65 x 36.60 x 4.16 inches
See On Amazon #7
Ivation Split AC Mounting Bracket, Universal Heavy-Duty Outdoor Wall Mount System with Hardware & Level for Ductless Mini Split Air Conditioner Condenser & Heat Pump Units, 440 Lb. Max Capacity
Asin: B0BV7FQS9N | Model: IVASACMNT9 | PartNumber: IVASACMNT9 | Ean: 0843812174077 | UPC: 843812174077
Rubber Pads Prevent Unit Scratches | Adjustable Shock-Absorbing Anchors Securely Cradle & Softly Cushion The Mini Split Compressor To Eliminate Vibration, Minimize Sound Transfer To Interior Structure & Improve Overall Security While In Use | Heat & Cool Confidently Knowing Your Wall Mounting Bracket Will Never Scratch, Scrape, Dent Or Damage Pump.
For Residential & Commercial Use | Support All Kinds Of Ductless Heating & Cooling Equipment For Home, Business, Office & Other Hvac Applications | Our Universal Bracket Features Foldable Arms For When It’S Not In Use, Making It A Safe Yet Subtle Choice For Apartment Buildings, Condos, Hotels, Restaurants, Basements, Retail Stores, Garages, Etc..
Quickly & Easily Installs Outside | All-In-One Kit Comes Ready To Mount Straight Out The Box With Various Bolts, Washers, Screws, Nuts & Other Hardware Included [Some Tools Required] | Multiple Bracket Holes Provide A Custom Fit For Most Size Ac Compressors, While A Handy Bubble Level Is Built Right Into The Crossbar For Perfect Mounting Every Time.
Built To Last Season After Season | Instead Of Resting Unit On The Ground, Our Heavy-Duty Rack Keeps Your Ductless Heating & Cooling System Safely Raised & Securely Fastened Up High To Prevent Damage From Water Flooding, Snow, Dirt, Mud, Debris & Theft | Strong Metal Parts Are Also Rust- & Corrosion-Resistant For Reliable Weather Resistance.
Features
- MINI SPLIT WALL MOUNT BRACKET | Complete HVAC Mounting System Lets You Secure Your Condenser/Compressor on Any Concrete, Brick or Similar Exterior Wall | Set Includes 39.4 Crossbar, [2] Foldable L-Shaped Brackets [25.6 L x 17.7 H] & Hardware Kit | Use for Discreet Unit Placement, Fall Prevention & Universal Support Up to 440.9 Pounds
- BUILT TO LAST SEASON AFTER SEASON | Instead of Resting Unit on the Ground, Our Heavy-Duty Rack Keeps Your Ductless Heating & Cooling System Safely Raised & Securely Fastened Up High to Prevent Damage from Water Flooding, Snow, Dirt, Mud, Debris & Theft | Strong Metal Parts Are Also Rust- & Corrosion-Resistant for Reliable Weather Resistance
- RUBBER PADS PREVENT UNIT SCRATCHES | Adjustable Shock-Absorbing Anchors Securely Cradle & Softly Cushion the Mini Split Compressor to Eliminate Vibration, Minimize Sound Transfer to Interior Structure & Improve Overall Security While in Use | Heat & Cool Confidently Knowing Your Wall Mounting Bracket Will Never Scratch, Scrape, Dent or Damage Pump
- QUICKLY & EASILY INSTALLS OUTSIDE | All-in-One Kit Comes Ready to Mount Straight Out the Box with Various Bolts, Washers, Screws, Nuts & Other Hardware Included [Some Tools Required] | Multiple Bracket Holes Provide a Custom Fit for Most Size AC Compressors, While a Handy Bubble Level is Built Right Into the Crossbar for Perfect Mounting Every Time
- FOR RESIDENTIAL & COMMERCIAL USE | Support All Kinds of Ductless Heating & Cooling Equipment for Home, Business, Office & Other HVAC Applications | Our Universal Bracket Features Foldable Arms for When It s Not in Use, Making it a Safe Yet Subtle Choice for Apartment Buildings, Condos, Hotels, Restaurants, Basements, Retail Stores, Garages, Etc.
- See more on Amazon...
Brand: Ivation | Manufacturer: Ivation
Dimensions: 16.50 x 22.25 x 33.50 inches | Weight: 12.00 Pounds
Warranty: 1 Year Limited
See On Amazon #8
Mini Split Wall Mounting Bracket for Outdoor Condenser 7000-24000 BTU Universal Mini Split Heat Pump Systems Support Brackets Support up to 330 lbs
Asin: B0CDGJPZ67 | Model: NINI SPLIT BRACKET | PartNumber: NINI SPLIT BRACKET
Universal: Compatible With Most Wall-Mounted Mini Split Air Conditioners Heat Pump Systems With 7,000-24,000 Btu, Supporting Up To 330 Lbs. Fits All Brands Of Air Conditioner Split System Outdoor Condensing And Outdoor Heat Pump Units..
Useful - The Mini Split Mounting Bracket Makes The Ac Unit Off The Ground, Preventing It From Dirt, Debris, Leaves, Snow, And Rainy Weather, Ensuring The Security Of Operation And Long Use Life..
Package Includes: All Necessary Hardware Is Provided, The Seven-Hole Rubber Pads Are Designed To Minimize The Vibration And Noise From The Condensing Unit.
Installation Notes: A Minimum 5'' Clearance Is Provided For Easy Airflow As Needed For Condenser Operation(Minimum Clearance 5'' For Wall Mount, 12'' For Floor Mount).
Features
- Material: Galvanized steel with powder-coating surface treatment, anti-rusting and weather-proof, perfect for outdoor application. Installing this bracket can keep the condenser clean and extend service life.
- Installation Notes: A minimum 5'' clearance is provided for easy airflow as needed for condenser operation(minimum clearance 5'' for wall mount, 12'' for floor mount)
- Universal: Compatible with most wall-mounted mini split air conditioners heat pump systems with 7,000-24,000 BTU, supporting up to 330 lbs. Fits all brands of air conditioner split system outdoor condensing and outdoor heat pump units.
- Package Includes: All necessary hardware is provided, the seven-hole rubber pads are designed to minimize the vibration and noise from the condensing unit
- Useful - The mini split mounting bracket makes the AC unit off the ground, preventing it from dirt, debris, leaves, snow, and rainy weather, ensuring the security of operation and long use life.
- See more on Amazon...
Brand: GUEQUITLEX | Manufacturer: GUEQUITLEX
See On Amazon #9
Anti-Vibration Shock Absorbing Rubber Ground Stand Mounting Bracket for HVAC, Central Air Conditioning or Mini Split Air Conditioner Condenser Pad Damping Compressor Feet (Small 7500-35000BUT )
Asin: B0CTFBTGDY | Model: RYJD0008 | PartNumber: RYJD0008
Wide Range Of Applications: Air Conditioning Outdoor Unit, Hvac, Central Air Conditioning Outdoor Unit, Air Compressors, And All Suitable Mechanical Devices That Require Shock Absorption And Fixing Etc Etc.
Package Include:4 Pack Rubber Vibration Isolator Mounting Bracket+ 8 Screws+4 Rubber Plugs+ 4 Rubber Isolation Pads.
Crafted From Rubber，Scientific Design Ensures Perfect Fixing And Damping Effect Under Heavy Pressure To Bear..
Reliable Rubber Vibration Isolation Cushion For Shock Absorption.
Features
- Adapts to any mini split air conditioner condensing, support up to 1000 pounds for all 4 pcs.
- Reliable rubber vibration isolation cushion for shock absorption
- Wide range of applications: air conditioning outdoor unit, HVAC, central air conditioning outdoor unit, Air Compressors, and all suitable mechanical devices that require shock absorption and fixing etc etc
- Crafted from rubber scientific design ensures perfect fixing and damping effect under heavy pressure to bear.
- Package Include:4 pack Rubber Vibration Isolator Mounting Bracket+ 8 screws+4 rubber plugs+ 4 Rubber Isolation Pads
- See more on Amazon...
Brand: TAUROX | Manufacturer: TAUROX
See On Amazon #10
Wall Mounting Bracket for 9000-36000 Btu Condenser Ductless Mini Split Air Conditioner Heat Pump Systems, Rust Free Aluminium Alloy Support Brackets
Asin: B07B73G8QR | Model: MB12ALA-1 | PartNumber: MB12ALA-1 | Ean: 0763684323888 | UPC: 763684323888
❤Accurate Construction - Advanced Technique To Ensure Brackets Are Perpendicular To Each Other When Condenser Leveling..
❤Breezy Installation - Easy Assembly, All Necessary Hardware Included.Us Patent Pending. All Rights Reserved..
❤Damping Capacity - Reliable Rubber Vibration For Shock Absorption And Correct Distance From The Wall For Air Flow..
❤Condenser Protection - Raises The Compressor Unit Above Ground For Protection From Dirt, Debris, Snow, Floods, Vandalism, Etc. Are Perpendicular To Each Other When Condenser Leveling..
Features
- Anti-Rust & Sturdy - Solid and Rust Free Aluminium Alloy material could offer a longer service life, support up to 400lbs.
- Condenser Protection - Raises the compressor unit above ground for protection from dirt, debris, snow, floods, vandalism, etc. are perpendicular to each other when condenser leveling.
- Accurate Construction - Advanced technique to ensure brackets are perpendicular to each other when condenser leveling.
- Damping Capacity - Reliable rubber vibration for shock absorption and correct distance from the wall for air flow.
- Breezy Installation - Easy assembly, all necessary hardware included.US Patent Pending. All Rights Reserved.
- See more on Amazon...
Brand: JEACENT | Manufacturer: Jeacent Innovation
See On Amazon #11
Ivation Outdoor Split Air Conditioner Mount Bracket, Heavy-Duty Wall Mounting Universal AC Bracket with Hardware for Ductless Mini Split Condenser Heat Pumps & HVAC Systems, Max 331 Lb. Capacity
Asin: B08WJJ2Z39 | Model: IVASACMNT6 | PartNumber: IVASACMNT6 | Ean: 0843812147743 | UPC: 843812147743
Convenient Shock-Absorbing Dampers | Durable Rubber Anchors Prevent Scrapes & Scratches While Properly Cushioning The Unit To Absorb Vibration & Minimize Sound Transfer To Interior Structure | Adjustable Dampers Also Enable Optimal Air Flow Between Wall & Compressor For Superior Safety & Energy Efficiency.
Perfect For Home, Business & Office | Highly Versatile, Adaptable Design Suits A Variety Of Residential & Commercial Hvac Applications | Great For Mounting Mini Split Air Conditioner & Heat Pump Systems Outside Home, Apartment, Condo, Finished Basement, Hotel Room, Restaurant, Retail Store, Office, Garage & More.
Hardware Included For Easy Install | Complete Wall Mounting Set Comes With All The Hardware You Need To Attach To Most Substrates In Minutes Including Back Bar, Brackets, Adjustable Bolts, Hex Nuts, Gaskets, Expansion Bolts & More | Pivoting Extension Arms Also Fold Down For Compact Storage When Bracket Is Not In Use.
Indestructible Weatherproof Parts | Heavy-Duty Platform Keeps Your Ac Compressor Raised & Leveled High Above Ground To Protect Against Water Flooding, Snow, Dirt, Mud, Debris & Theft | Super Strong, High-Quality Steel Parts Offer Reliable Weather Resistance & Powerful Adhesion To Both Brick & Concrete.
Features
- UNIVERSAL MINI-SPLIT SUPPORT SYSTEM | 33.5 x 21.6 x 17.7 Outdoor HVAC Mounting Bracket Safely Secures Most Size Compressors/Condensers to Exterior Wall for Discreet Placement & Dependable Fall Prevention | Extend the Life of Your Ductless Heating & Cooling Unit with Maximum Weight Capacity of 331 Pounds
- INDESTRUCTIBLE WEATHERPROOF PARTS | Heavy-Duty Platform Keeps Your AC Compressor Raised & Leveled High Above Ground to Protect Against Water Flooding, Snow, Dirt, Mud, Debris & Theft | Super Strong, High-Quality Steel Parts Offer Reliable Weather Resistance & Powerful Adhesion to Both Brick & Concrete
- CONVENIENT SHOCK-ABSORBING DAMPERS | Durable Rubber Anchors Prevent Scrapes & Scratches While Properly Cushioning the Unit to Absorb Vibration & Minimize Sound Transfer to Interior Structure | Adjustable Dampers Also Enable Optimal Air Flow Between Wall & Compressor for Superior Safety & Energy Efficiency
- HARDWARE INCLUDED FOR EASY INSTALL | Complete Wall Mounting Set Comes with All the Hardware You Need to Attach to Most Substrates in Minutes Including Back Bar, Brackets, Adjustable Bolts, Hex Nuts, Gaskets, Expansion Bolts & More | Pivoting Extension Arms Also Fold Down for Compact Storage When Bracket is Not in Use
- PERFECT FOR HOME, BUSINESS & OFFICE | Highly Versatile, Adaptable Design Suits a Variety of Residential & Commercial HVAC Applications | Great for Mounting Mini Split Air Conditioner & Heat Pump Systems Outside Home, Apartment, Condo, Finished Basement, Hotel Room, Restaurant, Retail Store, Office, Garage & More
- See more on Amazon...
Brand: Ivation | Manufacturer: Ivation
Dimensions: 16.50 x 22.25 x 33.50 inches
See On Amazon #12
WeCooper Outdoor Split Air Conditioner Wall Mounting Bracket for 7000-18000BTU Universal Ductless MiniSplit Condenser Compressor&HVAC Systems, Heavy Duty Foldable AC Mount Bracket,Max440LB Capacity
Asin: B0BPRT5VS1 | Model: HL5502 | PartNumber: HL5502
Premium Heavy Quality: Super Strong Galvanized Steel And New Technology For Surface Treatment-Powder Coating Make Mini Split Wall Mounting Window Ac Bracket Stand Great Reliable Weather Resistant & Powerful Adhesion To Brick Concrete Stone Masonry Wall With 4*Heavy Steel Expansion Bolts For A Long Time.Pivoting Extension Arms Can Be Folded Down When Minisplit Bracket For Outdoor Mini Split Ac Unit Is Not In Use To Compact Pact Storage.
Easy To Install:Air Conditioner Accessories Bracket Will Be Assembled In Minutes With All Necessary Hardware& Instructions Included:1*Cross Bar,2*Foldable L-Shaped Brackets,6*Adjustable Bolts&Nuts,8*Gaskets, 4*Rubber Vibration Pads&Rings,4*Heavy Steel Expansion Bolts,2*Angle Regulators On The Vertical Arms Help You Adjust The Distance Between The Mini Split Bracket And The Wall.
Free To Worry:If Any Accessories Missing Or Installation Of Air Conditioner Bracket, Please Feel Free To Contact Us At Any Time,And We Are Always Here.
Comfortable&Ideal Life: Durable Rubber Dampers Of Air Conditioner Support Bracket Will Absorb Vibration&Minimize Noise Transfer To Interior Structure,Keeping Your Life Quietly&&Sleeping Well;Outdoor Heavy Duty Mini Split Wall Mounting Platform Keeps Your Ac Compressor Off The Ground From Water,Bugs,Weedwhackers,Flooding,Snow,Dirt,Hurricane,Mud,Debris,Grass-Clippings,Theft Etc, Making Your Yard Easily Clean& Very Tidy.
More Sturdy&Stable:This Mini Split Mounting Rack Is Designed With Heavy Duty Structure Due To Years Of Dedicated Research.There Are Reinforcing Triangular Structure& Stiffener Structure On The Arms, Meanwhile With Horizontal Support Beam On The Wall Mounting Bracket For Outdoor Mini Split Ac Unit To Support Up To 550Lbs. Exclusive Built-In Spirit Level Of Mini Split Wall Bracket Mounting Can Help You Correct Mounting Slope Position While Installation.
Features
- Universal&Safety:Outdoor mini split AC unit support mount works securely with most mini split air conditioners heat pump systems etc. Adjustable to support mini split systems from 9000 BTU to 36000 BTU, you can enjoy comfortable life for many years with your ductless heating & cooling unit.Ideal for a variety of residential & commercial HVAC applications,outside home,office,apartment,finished basement, hotel room,restaurant,retail store, condo, garage
- More Sturdy&Stable:This mini split mounting rack is designed with heavy duty structure due to years of dedicated research.There are reinforcing triangular structure& Stiffener structure on the arms, meanwhile with horizontal support beam on the wall mounting bracket for outdoor mini split AC unit to support up to 550lbs. Exclusive built-in spirit level of mini split wall bracket mounting can help you correct mounting slope position while installation
- Premium Heavy Quality: Super strong galvanized steel and new technology for surface treatment-powder coating make mini split wall mounting window AC bracket stand great reliable weather resistant & powerful adhesion to brick concrete stone masonry wall with 4*heavy steel expansion bolts for a long time.Pivoting extension arms can be folded down when minisplit bracket for outdoor mini split ac unit is not in use to compact pact storage
- Comfortable&Ideal Life: Durable rubber dampers of air conditioner support bracket will absorb vibration&minimize noise transfer to interior structure,keeping your life quietly&&sleeping well;Outdoor heavy duty mini split wall mounting platform keeps your AC compressor off the ground from water,bugs,weedwhackers,flooding,snow,dirt,hurricane,mud,debris,grass-clippings,theft etc, making your yard easily clean& very tidy
- Easy to Install:Air conditioner accessories bracket will be assembled in minutes with all necessary hardware& instructions included:1*cross bar,2*foldable L-shaped brackets,6*adjustable bolts&nuts,8*gaskets, 4*rubber vibration pads&rings,4*heavy steel expansion bolts,2*angle regulators on the vertical arms help you adjust the distance between the mini split bracket and the wall
- Free to Worry:If any accessories missing or installation of air conditioner bracket, please feel free to contact us at any time,and we are always here
- See more on Amazon...
Brand: WeCooper | Manufacturer: WeCooper
Dimensions: 14.82 x 17.95 x 30.71 Inches
See On Amazon #13
Outdoor Wall Mounting Condenser Brackets for Universal Mini Split Ductless Air Conditioner Heat Pumps, Heavy Duty 304 Stainless Steel AC Mounting Air Conditioner Brackets, Max 990 Lb Capacity
Asin: B0CRNTNZ6C | Ean: 9015020883039
Condenser Protection: The Wall-Mounted Air Conditioner Mounting Bracket Can Keep Your Air Conditioner Outdoor Unit Off The Ground To Prevent Damage Caused By Water, Debris, Vandals, Rain, Snow, Etc. Suitable For All Seasons, This Helps Keep The Air Conditioner Clean And Prolongs Use. Life..
Easy To Install: Designed For Easy Installation, The Split Mounting Bracket Comes With All The Necessary Hardware And Clear Instructions So You Can Set Up Your Mini Split System Quickly And Easily. Suitable For A Variety Of Heating And Cooling Equipment For Homes, Businesses, Offices, And Other Hvac Applications..
Space-Saving Design: Maximize Your Space By Mounting Your Mini-Split On The Wall, Keeping It Out Of The Way And Providing Efficient Cooling And Heating Without Taking Up Valuable Floor Space..
Sturdy And Long-Lasting Material: The Air Conditioner Wall Mount Bracket Is Made Of High-Quality Heavy-Duty 304 Stainless Steel, Which Is Waterproof, Rust-Proof And Long-Lasting. The Triangular Support Structure Increases The Stability And Sturdiness Of The Stand, So You Don't Have To Worry About The Condenser Falling And Being Damaged..
Features
- UNIVERSAL AIR CONDITIONER BRACKET: Split mounting bracket works with most mini-split air conditioners. Compatible with condenser units and heat pump systems, making it a versatile option for a variety of HVAC equipment, this air conditioner stand can support up to 990 pounds.
- STURDY AND LONG-LASTING MATERIAL: The air conditioner wall mount bracket is made of high-quality heavy-duty 304 stainless steel, which is waterproof, rust-proof and Long-lasting. The triangular support structure increases the stability and sturdiness of the stand, so you don't have to worry about the condenser falling and being damaged.
- CONDENSER PROTECTION: The wall-mounted air conditioner mounting bracket can keep your air conditioner outdoor unit off the ground to prevent damage caused by water, debris, vandals, rain, snow, etc. Suitable for all seasons, this helps keep the air conditioner clean and prolongs use. life.
- SPACE-SAVING DESIGN: Maximize your space by mounting your mini-split on the wall, keeping it out of the way and providing efficient cooling and heating without taking up valuable floor space.
- EASY TO INSTALL: Designed for easy installation, the split mounting bracket comes with all the necessary hardware and clear instructions so you can set up your mini split system quickly and easily. Suitable for a variety of heating and cooling equipment for homes, businesses, offices, and other HVAC applications.
- See more on Amazon...
Manufacturer: FUDUOSHUNYI
See On Amazon #14
TURBRO Wall Mount Bracket for Mini Split Ductless Air Conditioner Heat Pump System, Foldable Stainless Steel Stand, Support Condenser up to 350 lbs (7,000-18,000 BTU), 1 Pair
Asin: B08B5XZRX4 | Model: 707-90-111 | PartNumber: 707-90-111 | Ean: 0816621022754 | UPC: 816621022754
Condenser Protection: A Mini Split Condenser Placed On The Ground Can Be Damaged By Water, Debris, Or Vandalism. Protect Your Condenser And Keep Your Home Cool By Mounting Your Condenser Off The Ground With The Turbro Split Ac Wall-Mounting Bracket..
Easy Install: All Mounting And Assembly Hardware Is Included So You Can Get Your Bracket Installed Right Away. If You Have Any Questions About Installation, Please Contact The Turbro Support Team From The Info Listed In Your Package..
Quieter Operation: We Included 4 Thick Rubber Pads To Place Under Your Condenser Unit To Reduce The Vibration And Noise From Your Mini Split Condenser. Simply Place The Pads Below The Condenser To Instantly Remove Noise From Your Unit..
Sturdy Design: A Specially-Engineered Triangle Support Structure Increases The Stability And Sturdiness Of The Bracket So You Never Have To Worry About Your Condenser Falling And Becoming Damaged..
Features
- UNIVERSAL APPLICATION: The TURBRO wall mount bracket is adaptable for most outdoor mini split condenser units from 7,000-36,000 BTUs, with a weight limit of 350 pounds.
- STURDY DESIGN: A specially-engineered triangle support structure increases the stability and sturdiness of the bracket so you never have to worry about your condenser falling and becoming damaged.
- CONDENSER PROTECTION: A mini split condenser placed on the ground can be damaged by water, debris, or vandalism. Protect your condenser and keep your home cool by mounting your condenser off the ground with the TURBRO split AC wall-mounting bracket.
- QUIETER OPERATION: We included 4 thick rubber pads to place under your condenser unit to reduce the vibration and noise from your mini split condenser. Simply place the pads below the condenser to instantly remove noise from your unit.
- EASY INSTALL: All mounting and assembly hardware is included so you can get your bracket installed right away. If you have any questions about installation, please contact the TURBRO support team from the info listed in your package.
- See more on Amazon...
Brand: TURBRO | Manufacturer: TURBRO
Dimensions: 9.00 x 29.00 x 18.00 Inches
See On Amazon #15
Rectorseal 87735 Bracket, White
Asin: B01B45G1SY | Model: 87735 | PartNumber: 87735 | Ean: 0021449877350 | UPC: 021449877350
500Lb. Capacity.
This Is An Aftermarket Of Generic Part.
The Wbb500 Features A Sliding Cross Bar For Exceptional Equipment Width Range.
Features
- Made from heavy duty Steel with powdercoat finish
- The Wbb500 features a sliding cross bar for exceptional equipment width range
- 500lb. Capacity
- This is an aftermarket of generic part
- See more on Amazon...
Brand: Rectorseal | Manufacturer: The Rectorseal Corporation
Dimensions: 18.00 x 24.00 x 33.50 inches
See On Amazon #16
Rectorseal 87745 Bracket, White
Asin: B014XAVW68 | Model: 87745 | PartNumber: 87745 | Ean: 0021449877459 | UPC: 021449877459
330 Lb Capacity.
This Is An Aftermarket Of Generic Part.
This Adjustable Bracket Accommodates A Roof Slope Up To 45 Degrees Or 12″ Pitch.
Features
- Made from heavy duty Steel with powdercoat finish
- This adjustable bracket accommodates a roof slope up to 45 degrees or 12 pitch
- 330 lb capacity
- This is an aftermarket of generic part
- See more on Amazon...
Brand: Rectorseal | Manufacturer: The Rectorseal Corporation
Dimensions: 22.00 x 39.50 x 22.00 inches | Weight: 13.00 pounds
See On Amazon #17
AC Parts Mini Split Air Conditioner Bracket, Wall Mounting Support Brackets for 9000 BTU - 36000 BTU Ductless AC Condenser Units,Support up to 440lbs, Heavy Duty
Asin: B07MT9HMQF | Ean: 0788000790519 | UPC: 788000790519
【 ✅Durable Construction】:Wall Mounted Bracket Made Of Heavy Duty Steel, Quality Powder Coated With Cross Bar Design For A Weather Resistant Finish. Great For All Climates..
【 ✅Installation Notes】:Dimensions: Height: 17″3/4; Depth: 21″5/8；Width: 33″1/2,Slight Rearward Tilt To Wall Is Recommended For Safety Purposes.
【 ✅Easy Installation】: Set Includes All Anchoring Accessories To Assemble And Mount An Outside Air Conditioner Unit To An Exterior Wall..
【 ✅Condensers Protection】: Mini Split Wall Mounting Bracket Help Raises The Compressor Unit Above Ground For Protection From Dirt, Debris, Snow, Floods, Vandalism, Etc..
Features
- Universal Design : Heavy duty construction fits mini split outdoor unit 9000-36000BTU, wall mounting bracket support up to 440lbs Universal design accommodates most brands within loading capacity
- Condensers Protection : Mini split wall mounting bracket help raises the compressor unit above ground for protection from dirt, debris, snow, floods, vandalism, etc.
- Durable Construction :Wall mounted bracket made of heavy duty steel, quality powder coated with Cross Bar design for a weather resistant finish. Great for all climates.
- Easy Installation : Set includes all anchoring accessories to assemble and mount an outside air conditioner unit to an exterior wall.
- Installation Notes :Dimensions: Height: 17 3/4; Depth: 21 5/8 Width: 33 1/2,Slight rearward tilt to wall is recommended for safety purposes
- See more on Amazon...
Brand: AC Parts | Manufacturer: AC Parts Limited
See On Amazon #18
LBG Products Mini Split Wall Mounting Bracket for 9000-18000 Btu,Universal Ductless AC Heat Pumps Systems,Outdoor Foldable Condenser Bracket Support up to 280lbs
Asin: B07Q4NHGCD
【 ✅Dimensions】:The Size Of The Mini Split Mounting Bracket Is Height: 14" 5/8 X Depth: 17”7/16. Supports Up To 280 Lbs..
【 ✅Easy Installation】: Set Includes All Anchoring Accessories To Assemble And Mount An Outdoor Air Conditioner Unit To An Exterior Wall..
【 ✅Condenser Protection】: Mini Split Wall Bracket Help Raises The Compressor Unit Above Ground For Protection From Dirt, Debris, Snow, Floods, Vandalism, Etc..
【 ✅Universal Design】: Mini Split Wall Mounting Bracket Suitable For 9,000 To 18,000 Btu Capacity Units ,1-2P, Fits All Brands Air Conditioner Split System Outdoor Condensing And Heat Pump Unit..
Features
- Durable Construction :Mini split bracket made of heavy-duty steel, quality powder coated with foldable design for a weather resistant finish. Great for all climates.
- Universal Design : Mini split wall mounting bracket suitable for 9,000 to 18,000 BTU capacity units ,1-2P, fits all brands air conditioner split system outdoor condensing and heat pump unit.
- Dimensions :The size of the mini split mounting bracket is Height: 14 5/8 x Depth: 17 7/16. Supports up to 280 lbs.
- Condenser Protection : Mini split wall bracket help raises the compressor unit above ground for protection from dirt, debris, snow, floods, vandalism, etc.
- Easy Installation : Set includes all anchoring accessories to assemble and mount an outdoor air conditioner unit to an exterior wall.
- See more on Amazon...
Brand: LBG Products | Manufacturer: AC Parts Limited
See On Amazon #19
Daisypower Outdoor Wall Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Support Up to 9000-36000 Btu Condenser
Asin: B083FFC7L6 | Model: DP1069 | PartNumber: DP1069 | Ean: 0795749949191 | UPC: 795749949191
Sturdy Foldable Structure: Foldable Design With Ribbed Reinforcemant, Simple Structure With Cross Bar For Easy Installation, And Provide Enough Clearance For Air Flow..
Raise A/C Above Ground: This Bracket Can Raise Your Air Conditioner Above Ground To Avoid Harmful Elements Like Flood, Debris, And Provide More Space For Air Flow..
Slightly Rearward Tilt: A Slight Rearward Tilt Is Designed For Safty Purpose. Hardware Provided For Installation, Require 1/2Inch Drill Bit (Not Included)..
Heavy Gauge Material: Constructed With Thick Metal Plate For Heavy Duty Supporting. Power Coating Finish For Durable Use, Dimension Height: 17-1/2'' ; Depth:21-1/2''; Width: 33-1/2''.
Features
- Heavy Duty Support: Sturdy bracket for heavy duty supporting, up to 430lbs, suitable for 9000-36000 BTU unit
- Heavy Gauge Material: Constructed with thick metal plate for heavy duty supporting. Power coating finish for durable use, Dimension Height: 17-1/2'' ; Depth:21-1/2''; Width: 33-1/2''
- Sturdy Foldable Structure: Foldable design with ribbed reinforcemant, simple structure with cross bar for easy installation, and provide enough clearance for air flow.
- Slightly Rearward Tilt: A slight rearward tilt is designed for safty purpose. Hardware provided for installation, require 1/2inch drill bit (not included).
- Raise A/C Above Ground: This bracket can raise your air conditioner above ground to avoid harmful elements like flood, debris, and provide more space for air flow.
- See more on Amazon...
Brand: Daisypower | Manufacturer: Daisypower
Weight: 8.30 Pounds
See On Amazon
Looking For Something Else?
Search