iJDMTOY 20-Piece 5mm Amber Yellow 12V LED Emitter Lights w/Wire Pigtails Compatible with Turn Signal, Lighting Decoration/Retrofit Build
Asin: B01575EORW | Model: Custom DIY Job LED Lighting Components | PartNumber: Custom DIY Job LED Lighting Components
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Already Converted To 12V, So You Can Directly Tap/Connect Them To The Vehicle's 12V Power Without Having To Do Difficult Calculations And Adding Additional Components.
Please Note That This Is A Highly Retrofit Product, There Are Some Modifications Required For The Installation Such As Wiring, Drilling, Soldering, Etc.
Perfect For Exterior Such As Tail Lamps, Brake Light, Front Road Illuminating Lights, Halo Angel Eyes, Daytime Running Lights Or Fog Lights Retrofit Or For Car Interior Such As Foot Area Lights, Cluster Lights, Etc.
Led Light Emits Amber Yellow Color.
Features
- 20 pieces of 5mm projector hat LED diodes with extended 2" wirings/pigtails
- LED light emits amber yellow color
- Already converted to 12V, so you can directly tap/connect them to the vehicle's 12V power without having to do difficult calculations and adding additional components
- Perfect for exterior such as tail lamps, brake light, front road illuminating lights, halo angel eyes, daytime running lights or fog lights retrofit or for car interior such as foot area lights, cluster lights, etc
- Please note that this is a highly retrofit product, there are some modifications required for the installation such as wiring, drilling, soldering, etc
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.04 pounds
See On Amazon Similar To iJDMTOY 20Piece 5mm Amber Yellow
#1
iJDMTOY (2 Amber Yellow 5W High Power Bull Eye LED Projector Lamps, Compatible With Driving DRL Lights, Fog Lights or Parking Position Lights
Asin: B06XJ78JXS | Model: Universal LED Daylight Retros Lighting | PartNumber: Universal LED Daylight Retros Lighting
Good For Driving Drl Lights, Fog Lights Or Parking Position Lights. Come With Two Mini Bars With Nuts On The Back For Mounting..
This Is A Universal Fit Product, Please Double-Check Picture 3 For Detailed Measurements/Size To Ensure It Will Work For Your Project Before Buying. Require Some Creative Modifications Including Drilling, Wiring, And Cutting To Install On Your Vehicle..
Projector Lens Diameter: 1.25", Lamp Diameter: 1.55", Total Length: 1.75"; Amazing 650 Lumen Lighting Output, Voltage: 12V-24V And Ip67 Water Resistant For Exterior Use.
Features
- Made with super high 5W XB-E LED emitter and 3x optical projector lens for more intensive lighting performance
- Projector lens diameter: 1.25, Lamp diameter: 1.55, Total length: 1.75; Amazing 650 lumen lighting output, Voltage: 12V-24V and IP67 water resistant for exterior use
- Good for driving DRL Lights, fog Lights or parking position lights. Come with two mini bars with nuts on the back for mounting.
- This is a universal fit product, please double-check picture 3 for detailed measurements/size to ensure it will work for your project before buying. Require some creative modifications including drilling, wiring, and cutting to install on your vehicle.
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.44 Pounds
See On Amazon #2
iJDMTOY 12V 70mm Round Dome Shape Flush Mount Amber Lens Amber Yellow LED Side Markers/Turn Signal/Reverse Backup Lamps, Compatible With Classic 50s 60s Car Caravan Truck Motorcycle, etc
Asin: B0BPJPZN22 | Model: Classic Caravan Motorhome 70mm Round LED | PartNumber: Classic Caravan Motorhome 70mm Round LED
Flat Bottom, Two Wires (On Or Off) Lighting Design, Come With Foam Gaskets And Screws For An Easy Universal Fit Installation.
We Have Test-Fit These Led Light Assemblies On A 1957 Suburban And A 1965 Shelby Cobra, As Long As The Surface Is Pretty Much Flat And The Size Is Around 2.7~2.8 Inches, You Should Have No Problem Installing These; If You Are Using Them For Turn Signal, You Might Need To Add 50W 6-Ohm Load Resistors To Bypass The Led Blinker Hyper Flash.
Fit Many 50S 60S 70S Classis Cars That Use The 68Mm~73Mm Diameter Round Shape Front And Rear Indicator Lamps Such As Front Side Markers, Clearance/Parking, Turn Signal Corner Lights And Rear Tail/Brake Lights, Turn Signal Or Back-Up Reversing Lights, Etc Depends On The Lens/Covers And Led Light Colors.
Powered By 40 Pieces Of Super Bright Amber Yellow Led Diodes With Chrome Reflector Inside Cased With An Amber Lens Durable Abs Plastic Cover (No Bezels Included).
Features
- One pair 12V DC 70mm (2.75") round/dome shape flush mount LED lamps
- Powered by 40 pieces of super bright amber yellow LED diodes with chrome reflector inside cased with an amber lens durable ABS plastic cover (no bezels included)
- Flat bottom, two wires (ON or OFF) lighting design, come with foam gaskets and screws for an easy universal fit installation
- Fit many 50s 60s 70s classis cars that use the 68mm~73mm diameter round shape front and rear indicator lamps such as front side markers, clearance/parking, turn signal corner lights and rear tail/brake lights, turn signal or back-up reversing lights, etc depends on the lens/covers and LED light colors
- We have test-fit these LED light assemblies on a 1957 Suburban and a 1965 Shelby Cobra, as long as the surface is pretty much flat and the size is around 2.7~2.8 inches, you should have no problem installing these; If you are using them for turn signal, you might need to add 50W 6-Ohm load resistors to bypass the LED blinker hyper flash
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.28 pounds
See On Amazon #3
iJDMTOY (2) 20mm Amber Projector Lens 3W Flush/Surface Mount LED Bolt Lights, Good for Car Exterior Grille Bumper Underbody Puddle or Interior Dashboard Ambient Lighting Decoration
Asin: B093QP4CV8 | Model: Aluminum Exterior IP65 Waterproof Pods | PartNumber: Aluminum Exterior IP65 Waterproof Pods
Good For A Lot Of Retrofit/Custom Builds, Exterior For Grille Mesh Clearance Light, Fender, Under Mirror Puddle, Or Running Board Courtesy Light Or On Bumper As Auxiliary Fog Driving Light.
Easy To Install: Simply Mount The Led Pod To Any Existing 0.8 To 1.4" Openings Or Use A 0.8"/20Mm Drill Bit To Make A Hole To Fit These Led Stud Lights And Screw Tighten From The Back, And Then Connect The Red/Black Wires To Any Existing 12V Power Source.
For The Inside Of The Car As Footwell/Under-Dash Light, Cargo Area Illumination Light, Accent/Ambient Lighting, Etc.
Come With Additional 1.4" Diameter Washers To Fit Some Existing Bigger Openings Such As The The Front Grille Gaps Or Lower Bumper Insert Areas.
Features
- 2 pieces of amber 20mm (0.8 inches) diameter projector lens 3W high power flush/surface mount LED bolt lamps with 36-inch long pigtails (Please note that some pictures show more than 2 pieces of lamp being installed)
- Come with additional 1.4 diameter washers to fit some existing bigger openings such as the the front grille gaps or lower bumper insert areas
- Good for a lot of retrofit/custom builds, exterior for grille mesh clearance light, fender, under mirror puddle, or running board courtesy light or on bumper as auxiliary fog driving light
- For the inside of the car as footwell/under-dash light, cargo area illumination light, accent/ambient lighting, etc
- Easy to install: simply mount the LED pod to any existing 0.8 to 1.4 openings or use a 0.8/20mm drill bit to make a hole to fit these LED stud lights and screw tighten from the back, and then connect the red/black wires to any existing 12V power source
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.13 pounds
See On Amazon #4
iJDMTOY Dark Smoked Lens Amber Full LED Strip Bumper Reflector Replace Side Marker Light Kit Compatible with 2014-19 BMW F15 X5, Replace OEM Amber Front Reflectors
Asin: B0B7ZZ6PMT | Model: Change Left/Right Original Lamp Assembly | PartNumber: Change Left/Right Original Lamp Assembly
Not Only You Will Get A Pair Of These Awesome Looking Reflectors, But Also Be Able To Hook Them Up To Any 12V Power Source To Light Up With Super Bright Led Light For Your Bimmer!.
Installation Tip: (1) Access To The Back Of The Bumper To Remove The Original Amber Reflector From The Inside; (2) Fully Clean The Surface Where You Need To Re-Apply The Double-Sided Tape, Remove Any Residuals And Dirts; (3) Peel And Apply The New Side Markers And Use Your Hand To Hold It For About 1 Min To Fully Let It Bond; (4) Tap The Red/Black Wire Wires To The Existing Front Road Illuminating Lamp +/- To Light Up The Led Light.
Each Side Marker Is Powered By A Series Of 50 Pieces Super Bright Amber Yellow Led Diodes Inside To Form A Perfect Lighting Strip Along The Curve Of The Side Marker.
These Replacement Front Bumper Side Marker Reflectors Come With A Trendy Black-Out Smoke Tinted Color To Help You Get Rid Of Those Ugly Usmd's Amber Reflectors On The Sides.
Features
- Compatible with 2014-2019 BMW F15 X5, Replace OEM amber yellow light-less reflector assy
- These replacement front bumper side marker reflectors come with a trendy black-out smoke tinted color to help you get rid of those ugly USMD's amber reflectors on the sides
- Not only you will get a pair of these awesome looking reflectors, but also be able to hook them up to any 12V power source to light up with super bright LED light for your Bimmer!
- Each side marker is powered by a series of 50 pieces super bright amber yellow LED diodes inside to form a perfect lighting strip along the curve of the side marker
- Installation Tip: (1) Access to the back of the bumper to remove the original amber reflector from the inside; (2) fully clean the surface where you need to re-apply the double-sided tape, remove any residuals and dirts; (3) peel and apply the new side markers and use your hand to hold it for about 1 min to fully let it bond; (4) tap the red/black wire wires to the existing front road illuminating lamp +/- to light up the LED light
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.32 Pounds
See On Amazon #5
iJDMTOY JDM-Spec Clear Lens Amber LED Front Side Marker Lights w/Adapter Wiring Pigtails Compatible With/Direct Fit JDM Subaru 2000-07 Impreza WRX STI, 00-03 Forester (Require Mods For US Models)
Asin: B0C4MKJP89 | Model: LH RH Driver Passenger Reflector Assy | PartNumber: LH RH Driver Passenger Reflector Assy
One Pair Lh Rh Clear Lens With Black Interior Full Led Sidemarkers, Powered By 15 Pieces Of Super Bright Amber Yellow Led Diodes To Form A Perfect Lighting Strip When Lighting Up.
Give Your Usdm Subi A Nice Upgrade Jdm Imported Appearance That Will Turn Everyone's Head Over!.
In Order To Get This Product Work With Most Our Us Jdm Fans, We Have Also Included The Wiring Harness And Quick Tabs To Make This Custom Retrofit Work Easier! You Just Need To Cut Holes And Then Route The Wires To The Head Lamp +/- Or Turn Signal Light +/-.
Warning: This Product Is Designed To Upgrade The Jdm/Japanese Domestic Market Subarus Which Initially Come With Side Markers Already. For The Us Models, Since There Is No Front Side Markers At All, You Have To Cut The Hole On The Fender And Re-Wiring To Get This Product Work!.
Features
- Compatible with the JDM/Euro version of Subaru 2000-2007 Impreza WRX STI GDA GDB, 2000-2007 & 2011-2013 Forester (for USDM Subies, you need to cut/drill the holes on fender and re-run wires to get this product fit)
- Warning: this product is designed to upgrade the JDM/Japanese Domestic Market Subarus which initially come with side markers already. For the US models, since there is no front side markers at all, you have to cut the hole on the fender and re-wiring to get this product work!
- One pair LH RH clear lens with black interior full LED sidemarkers, powered by 15 pieces of super bright amber yellow LED diodes to form a perfect lighting strip when lighting up
- In order to get this product work with most our US JDM fans, we have also included the wiring harness and quick tabs to make this custom retrofit work easier! You just need to cut holes and then route the wires to the head lamp +/- or turn signal light +/-
- Give your USDM Subi a nice upgrade JDM imported appearance that will turn everyone's head over!
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.31 pounds
See On Amazon #6
iJDMTOY Clear Lens Amber Full Strip LED Front Bumper Reflector Replace Side Marker Light Kit Compatible With BMW 2019-2022 G20 3 Series 320i 330i 340i, Replace OEM Amber Reflex
Asin: B0BX7KWT25 | Model: Change Left/Right Original Lamp Assembly | PartNumber: Change Left/Right Original Lamp Assembly
Not Only You Will Get A Pair Of These Awesome Looking Reflectors, But Also Be Able To Hook Them Up To Any 12V Power Source To Light Up With Super Bright Led Light For Your Bimmer!.
Installation Tip: (1) Access To The Back Of The Bumper To Remove The Original Amber Reflector From The Inside; (2) Fully Clean The Surface Where You Need To Re-Apply The Double-Sided Tape, Remove Any Residuals And Dirts; (3) Peel And Apply The New Side Markers And Use Your Hand To Hold It For About 1 Min To Fully Let It Bond; (4) Tap The Red/Black Wire Wires To The Existing Front Lamp +/- To Light Up The Led Light.
Each Side Marker Is Powered By A Series Of 30 Pieces Super Bright Amber Yellow Led Diodes Inside To Form A Perfect Lighting Strip Along The Shape Of The Side Marker.
These Replacement Front Bumper Side Marker Reflectors Come With A Trendy Frosted White/Clear Color To Help You Get Rid Of Those Ugly Usmd's Amber Reflectors On The Sides.
Features
- Compatible with BMW 2019-up G20 3 Series 320i 330e 330i 340i, etc
- These replacement front bumper side marker reflectors come with a trendy frosted white/clear color to help you get rid of those ugly USMD's amber reflectors on the sides
- Not only you will get a pair of these awesome looking reflectors, but also be able to hook them up to any 12V power source to light up with super bright LED light for your Bimmer!
- Each side marker is powered by a series of 30 pieces super bright amber yellow LED diodes inside to form a perfect lighting strip along the shape of the side marker
- Installation Tip: (1) Access to the back of the bumper to remove the original amber reflector from the inside; (2) fully clean the surface where you need to re-apply the double-sided tape, remove any residuals and dirts; (3) peel and apply the new side markers and use your hand to hold it for about 1 min to fully let it bond; (4) tap the red/black wire wires to the existing front lamp +/- to light up the LED light
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.23 pounds
See On Amazon
Looking For Something Else?
Search