TotalBoat TotalProtect Epoxy Barrier Coat System (White, Quart), 1 Count (Pack of 1)
Asin: B01729KQ32 | Model: 487739 | PartNumber: 487739 | Ean: 0811932021700 | UPC: 811932021700
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Provides Superior Protection On All Underwater Metals.
Available In White Or Gray In Quart Or Gallon Sizes. Coverage: 225 Sq. Ft. Per Gallon (At 7 Mils Wet). Thinner: Totalboat Epoxy Primer Thinner 200..
Easy To Mix And Apply By Roller Or Spray. No Sanding Required. Fast Drying Primer Creates A Flexible, Durable Epoxy Barrier Coat..
Excellent For Gelcoat Blister Prevention And Repair Work On Fiberglass Boats.
Features
- High-build two part epoxy primer and barrier coat for use above and below the waterline
- Excellent for gelcoat blister prevention and repair work on fiberglass boats
- Provides superior protection on all underwater metals
- Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat.
- Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200.
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon Similar To TotalBoat TotalProtect Epoxy Barrier Coat
#1
TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (White), 1 Gallon (Pack of 1)
Asin: B00HS4YZB6 | Model: 365404 | PartNumber: 365404 | Ean: 0811932020321 | UPC: 811932020321
Easy To Apply By Brushing, Rolling Or Spraying: Use A Natural Bristle Paint Brush, A 1/8 " Solvent-Safe Foam Roller, Or To Spray, Use A 1.1Mm Tip; Wear Proper Personal Protection; Work In A Well-Ventilated Area; Boat Primer Is Chromate-Free And Lead-Free.
Available In White And Gray In Quart And Gallon Sizes. Brush/Roller Application - Thin With Totalboat Special Brushing Thinner 100; Spray Application - Thin With Xylene; Do Not Apply Topside Primer Thicker Than Recommended Or It May Not Cure Properly.
Dries Fast, Cures To A Smooth, Hard Finish: Ready To Sand In 60-90 Minutes At 65°F; Marine Paint Primer Is Easy To Sand, Then Just Wipe Clean And Apply A Topside Finish Such As Totalboat Wet Edge Or Totaltread Marine Non-Skid Deck Paint.
Covers Completely In Just One Coat: High-Solids Primer Seals The Surface With 1 Thin Coat; Apply A Second Coat Only If A Higher Build Is Needed; To Fill Large Surface Imperfections Use Totalboat Totalfair Epoxy Fairing Compound Before Applying Topside Primer.
Features
- ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
- COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
- EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
- DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65 F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
- AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 100.00 Kilograms
See On Amazon #2
TotalBoat Table Top Epoxy Resin 2 Quart Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts
Asin: B00S9R8E8Q | Model: TB-9334 | PartNumber: TB-9334 | Ean: 0811932020758 | UPC: 811932020758
2 Part Epoxy Is Easy To Use: Just Mix 1 Part Resin To 1 Part Hardener, Stir Thoroughly, And Pour On Your Prepared Surface; The Epoxy Will Level On Its Own And Cure At Room Temperature; Maximum Pour Depth Per Layer Is 1/8" - 1/4".
2 Quart Epoxy Kit Includes 1 Quart Of Resin & 1 Quart Of Hardener; Application Temperature: 70-80°F; Working Time: 20 Min. @ 70°F; Recoat Time: 4-8 Hrs; Cure Time: 16-20 Hrs @ 70°F; Coverage: 6.4 Sq Ft At 1/8" Thick; Store At 60-90°F.
No Vocs, Low Odor, Bpa-Free: No Harsh Fumes - Ideal For Indoor Or Shop Use With Adequate Ventilation And Proper Ppe; All Ingredients In This Food Safe Epoxy Resin Are On The Usda Approved List For Contact With Food, Once Cured; 100% Made In The Usa.
Epoxy Resists Scratches, Stains And Yellowing: Self-Leveling Formula Cures To A Finish As Smooth As Glass; Use This Versatile Diy Resin On Wood, Concrete, Ceramic, Stainless Steel And More; 100% Waterproof Upon Cure.
Features
- CLEAR EPOXY RESIN for a high gloss finish on bar tops, table tops & countertops; add pigments, tints or encapsulations to make your piece truly unique; versatile craft resin is also great for coating tumblers and casting coasters & jewelry
- EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass; use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more; 100% waterproof upon cure
- 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface; the epoxy will level on its own and cure at room temperature; maximum pour depth per layer is 1/8 - 1/4
- NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE; all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured; 100% made in the USA
- 2 QUART EPOXY KIT includes 1 quart of resin & 1 quart of hardener; application temperature: 70-80 F; working time: 20 min. @ 70 F; recoat time: 4-8 hrs; cure time: 16-20 hrs @ 70 F; coverage: 6.4 sq ft at 1/8 thick; store at 60-90 F
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 4.50 x 7.50 x 5.10 inches | Weight: 4.80 Pounds
See On Amazon #3
TotalBoat Polyester Finishing Resin (Gallon)
Asin: B00PZ1CUCU | Ean: 0811932021304 | UPC: 811932021304
Versatile Polyester Resin Is Easy Is To Mix With Mekp Catalyst And Apply By Brush Or Plastic Spreader To Prepared Fiberglass, Wood, Metal, And Composites.
Choose Quart Or Gallon Size. Includes Mekp Hardener. Note: You Can Even Tint Polyester Fiberglass Resin With Opaque Pigment Dispersions. If Tinting, Mix Pigment In Thoroughly Before Adding Mekp.
Durable, Hard Finish Resists Scratches And Staining. For A Glossy Appearance, The Cured Surface Can Be Wet Sanded And Buffed To A High Shine.
Easy To Use, Preferred By Pros For Building And Repairs: Medium Viscosity Resin Spreads Evenly, Wets Out Fiberglass Easily, Won't Sag On Vertical Surfaces & Prevents Patter Print-Through On Gelcoat. Ideal For Boat Building, Repairs, And Surfboards.
Features
- MARINE GRADE FINISHING RESIN contains wax so it dries to a tack-free surface ready for sanding, paint, or gel coat application. Used in fiberglass layups as the final coat over sticky polyester laminating resin
- EASY TO USE, PREFERRED BY PROS FOR BUILDING AND REPAIRS: Medium viscosity resin spreads evenly, wets out fiberglass easily, won't sag on vertical surfaces & prevents patter print-through on gelcoat. Ideal for boat building, repairs, and surfboards
- VERSATILE POLYESTER RESIN is easy is to mix with MEKP catalyst and apply by brush or plastic spreader to prepared fiberglass, wood, metal, and composites
- DURABLE, HARD FINISH resists scratches and staining. For a glossy appearance, the cured surface can be wet sanded and buffed to a high shine
- CHOOSE QUART OR GALLON SIZE. Includes MEKP hardener. NOTE: You can even tint polyester fiberglass resin with opaque Pigment Dispersions. If tinting, mix pigment in thoroughly before adding MEKP
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #4
TotalBoat TotalTread Non-Skid Deck Paint, Marine-Grade Anti-Slip Traction Coating for Boats, Wood, Fiberglass, Aluminum, and Metals (Light Gray, Gallon)
Asin: B07YSTGKMG | Model: TB-0121G | PartNumber: TB-0121G | Ean: 0811932024527 | UPC: 811932024527
Non-Slip Paint With Many Applications: Boat Decks, Docks, Cabin Soles, Hatches, Stairs, Steps, Gunwales, Swim Platforms, Concrete, Patios, Floors, And Anywhere Else You Need Sure Footing.
Comes In Paint Colors To Match Topsides Or Existing Non Skid Patterns: Sand Beige, Kingston Gray, Light Gray, White (Tintable With Totalboat Wet Edge Topside Paint). Available In Quarts And Gallons.
1-Part Paint Is Easy To Apply By Brush Or Roller On Fiberglass, Wood, Properly Primed Aluminum, Metals, And Previously Painted Surfaces; Add A Second Coat For Greater Traction. Coverage: 250-300 Sq. Ft. Per Gallon.
Long-Lasting Polyurethane Finish: Durable Coating Won't Fade Or Peel; Easy To Clean - Scrubbing Won't Wear Away The Finish; Affordable Way To Bring Your Old Boat Flooring Back To Life.
Features
- NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives
- LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel; easy to clean - scrubbing won't wear away the finish; affordable way to bring your old boat flooring back to life
- NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing
- 1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces; add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon
- COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 7.50 x 6.50 x 6.50 inches | Weight: 11.50 pounds
See On Amazon #5
TotalBoat-510825 High Performance Epoxy Kit, Crystal Clear Marine Grade Resin and Hardener for Woodworking, Fiberglass and Wood Boat Building and Repair (Gallon, Medium)
Asin: B06XH2Q869 | Model: 510825 | PartNumber: 510825 | Ean: 0811932023155 | UPC: 811932023155
Choose Slow, Medium, Or Fast Hardener To Control Working Properties And Cure Times. Slow Hardener Has The Longest Working And Cure Times. Medium Hardener Is Ideal For Most Applications. Fast Hardener Has The Shortest Working Time And Fastest Cure.
Pumps Included: Metered Resin And Hardener Pumps Provide The Exact 2 Parts Resin To 1 Part Hardener Ratio For A Proper Cure Every Time; Easy-To-Use Pumps Are Calibrated So All You Do Is Mix One Full Pump Of Hardener To Every One Full Pump Of Resin.
Choose Epoxy Kit Size: Pint, Quart, Gallon Or 2 Gallon. All Totalboat Epoxy Kits Come With Calibrated Pumps. Compatible With Epoxy Thickeners, Fillers And Coloring Agents.
Non-Blushing Epoxy System Means No Time-Consuming Washdowns To Remove Surface Blush Between Coats, So Projects Get Finished Faster. Low Odor And Low Vocs Make It Great For Shop Or Indoor Use. Cured Surface Is Bpa-Free, Safer For Potential Food Contact.
Features
- EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for clear coating. Simple mix ratio of 2 parts resin to 1 part hardener
- NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low VOCs make it great for shop or indoor use. Cured surface is BPA-free, safer for potential food contact
- CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium Hardener is ideal for most applications. Fast Hardener has the shortest working time and fastest cure
- CHOOSE EPOXY KIT SIZE: Pint, Quart, Gallon or 2 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps. Compatible with epoxy thickeners, fillers and coloring agents
- PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time; easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #6
TotalBoat-488366 TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas (White, Gallon), 1 Gallon (Pack of 1)
Asin: B01CR9JZGG | Model: 488366 | PartNumber: 488366 | Ean: 0811932021755 | UPC: 811932021755
Easy To Use: Apply 1-2 Coats By Brushing, Rolling Or Spraying On Prepared Fiberglass, Wood And Metal; Prime Prepared Metals With Totalboat Totalprotect; For Fiberglass Prime With Totalprotect If Desired; For Wood Use Totalboat Topside Primer If Desired.
Choose Color And Size: Available In White And Gray Colors, In Quart And Gallon Sizes. Coverage: 250-300 Sq Ft/Gal; Thinning: Brush/Roll Application - Totalboat Special Brushing Thinner 100; Spray Application - Xylene.
Easy To Keep Clean: Remove Grease, Oil, And Grime From The High-Gloss Finish Using A Cleaner/Degreaser. Totalbilge Won't Lift, Crack, Peel, Or Stain.
Choose Light Gray Or White: Paint Boat Bilge Areas To Protect And Brighten So You Can Find & Fix Leaks And Other Problems Before They Become Costly Damage, Or Find Items Accidentally Dropped Into The Bilge; Both Colors Offer Excellent Coverage And Hide.
Features
- TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat bilges, engine rooms, lazarettes, lockers, stowage areas and bulkheads
- CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly damage, or find items accidentally dropped into the bilge; both colors offer excellent coverage and hide
- EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal; prime prepared metals with TotalBoat TotalProtect; for fiberglass prime with TotalProtect if desired; for wood use TotalBoat Topside Primer if desired
- EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain
- CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal; THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100; Spray Application - Xylene
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #7
TotalBoat Aluminum Boat Barrier Coat (Gallon, Gray) 128 Fl Oz (Pack of 1)
Asin: B06X3RZRHB | Model: 497402 | PartNumber: 497402 | Ean: 0811932022769 | UPC: 811932022769
Fast Drying, With No Sanding Needed Between Coats.
Available In Gray In Quart Or Gallon Size Kits. Coverage: Approximately 225 Sq. Ft./Gallon @ 7 Mils Wet. Thinner: Totalboat Epoxy Primer Thinner 200.
For Use Above And Below The Waterline.
Provides Superior Corrosion Protection On All Underwater Metals.
Features
- High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with bottom paints or other 1- and 2-part paints
- Provides superior corrosion protection on all underwater metals
- Fast drying, with no sanding needed between coats
- For use above and below the waterline
- Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #8
Totalboat TotalShine Marine Finishing Compound 16 fl oz.
Asin: B00LLLVT6G | Model: 5 | PartNumber: 5 | Ean: 7313806023818, 0784427154590 | UPC: 784427154590
Contains No Wax Or Silicone. Use For Using As A Pre-Wax Application..
Size: Pint.
Apply With A Machine Polisher And Buffing Pad. Follow Up With A Coat Of Marine Wax..
Removes Fine Sanding Scratches, Light Oxidation, & Swirl Marks From Previously Compounded Areas. Works Well On Faded Or Neglected Gelcoats..
Features
- TotalShine is a marine finishing/polishing compound and suggested follow-up step after using rubbing compound.
- Removes fine sanding scratches, light oxidation, & swirl marks from previously compounded areas. Works well on faded or neglected gelcoats.
- Contains no wax or silicone. Use for using as a pre-wax application.
- Apply with a machine polisher and buffing pad. Follow up with a coat of marine wax.
- Size: Pint
- See more on Amazon...
Brand: TotalBoat | Manufacturer: Jamestown Distributors
See On Amazon #9
TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Sea Foam), 1 Gallon (Pack of 1)
Asin: B01N00QUZZ | Model: B01N00QUZZ | PartNumber: B01N00QUZZ | Ean: 0811932022516 | UPC: 811932022516
Self-Leveling, Abrasion Resistant Polyurethane Finish Is Easy To Clean; Will Not Fade, Crack, Or Peel; Easy To Touch Up; Ideal For Power Boat Hulls, Sailboat Hulls, Campers, Rv Exteriors, Doors And Trim.
Choose From 22 Popular High Gloss Colors In Pints, Quarts & Gallons. Coverage: 350-400 Sq. Ft./Gal. (White, Black & Gray Also Available In Flat Finish). Primer: Totalboat Topside Primer Or Totalprotect (Metals).
Versatile Topside Paint: Wet Edge Looks Great On Fiberglass, Wood, Metals, And Previously Painted Surfaces; Not For Continuous Submersion On Boat Bottoms That Remain In The Water Longer Than 72 Hours.
Easy To Apply: 1-Part Formula Provides Professional Results With Just A Brush And Roller (Roll & Tip Method); Can Also Be Applied By Spraying; For Use Above The Waterline.
Features
- DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention
- EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method); can also be applied by spraying; for use above the waterline
- SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean; will not fade, crack, or peel; easy to touch up; ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim
- VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces; not for continuous submersion on boat bottoms that remain in the water longer than 72 hours
- CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals)
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 7.75 x 6.50 x 6.50 inches | Weight: 10.00 pounds
See On Amazon #10
TotalBoat Seal Marine Sealant 10 Ounce
Asin: B00LLKGRBE | Ean: 0811932021144 | UPC: 811932021144
Ideal For Bedding Hardware, Windshields, And Porthole.
White In Color.
10 Ounce Cartridge Fits Standard Caulk Guns.
Cures In Temperatures From -20°F To +120°F. Can Be Wet Sanded And Painted After Curing..
Features
- Fast curing elastomeric marine sealant used to seal ports, bed hardware, and stops leaks.
- Cures in temperatures from -20 F to +120 F. Can be wet sanded and painted after curing.
- Ideal for bedding hardware, windshields, and porthole
- 10 ounce cartridge fits standard caulk guns
- White in color
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 0.63 pounds
See On Amazon
Looking For Something Else?
Search