Case Club Ammo Can Lock Hardware Kit with Stainless Steel Hardware and Waterproof Gasket for Steel (50 Cal), (Fat 50), (30 Cal), (20mm), (40mm) Ammo Cans (1 Count)
Asin: B018EYU5HQ | Ean: 0856792005507 | UPC: 856792005507
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Will Work With Medium Size Locks As Large As 1/4" Lock Shackle.
Includes Installation Directions & Gasket Washer To Keep Ammo Can Watertight.
Stainless Steel Hardware Which Helps Prevent Rust, And No Thread Locking Adhesive Required!.
Works On 50 Cal, Fat 50, 30 Cal, 20 Mm, 40 Mm Ammo Cans.
Features
- Ammo Can and padlock NOT INCLUDED
- Works on 50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm ammo cans
- Will work with medium size locks as large as 1/4 lock shackle
- Stainless steel hardware which helps prevent rust, and no thread locking adhesive required!
- Includes installation directions & gasket washer to keep ammo can watertight
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon Similar To Case Club Ammo Can Lock
#1
Case Club 5 Pistol and 20 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-3)
Asin: B00K7LGLRS | Model: 5 Pistol Case | PartNumber: 5 Pistol Case | Ean: 0856792005088 | UPC: 856792005088
Two Metal Reinforced Padlock Points That Support A Customer Supplied Padlock With A 1/4" Shackle Along With One Way Hinge Pins Ensure Your Gear Remains Safe And Secure..
Exterior Dimensions: 17.5" X 14.25" X 7.5".
Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Gen-3 Updates Include: Improved (User Friendly) Clamp Latches, Improved Heavy Duty Carry Handle With Molded Rubber Grip And Finger Grooves, Metal Reinforced Padlock Holes, Updated Pressure Release Valve And Sleeker Exterior Case Shell.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil..
Easily Convert The Case From A 5 Pistol Version To A 4 Pistol & Accessory Version By Removing The Pistol Module & Freeing Up Room For Ammunition & Safety Gear. Quickly Convert It Back To The 5 Pistol Version Anytime By Putting The Module Back In. Dual Purpose Foam Design Allows For Two Different Configurations For The Price Of One!.
Features
- Holds 5 pistols, 20 magazines (+5 more in the magwells) & comes with a rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage.
- Easily convert the case from a 5 pistol version to a 4 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 5 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations for the price of one!
- Two metal reinforced padlock points that support a customer supplied padlock with a 1/4 shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil.
- Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Gen-3 updates include: improved (user friendly) clamp latches, improved heavy duty carry handle with molded rubber grip and finger grooves, metal reinforced padlock holes, updated pressure release valve and sleeker exterior case shell
- Exterior Dimensions: 17.5 x 14.25 x 7.5
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 7.48 x 19.75 x 15.53 inches
See On Amazon #2
Case Club x204+ 9mm Long Term Ammo Storage Case - Includes Silica Gel Dessicant to Help Absorb Moisture and has Clear Lid for Easy View (Lockable & Non-Lockable Options) (Qty 684, Padlockable)
Asin: B0CKGWHQ7C | Ean: 0810114971543 | UPC: 810114971543
Ammo Is Held By 3 Foam Trays, Allowing For Triple Capacity..
2 Metal-Reinforced Padlockable Holes Are Available For Added Security (Padlock Not Included). A Built In Pressure Relief Valve Allows The Case To Be Opened At Any Altitude..
Engineered To Maximize Long Term Storage. The Case Is Airtight And The Silica Gel Will Soak Up Humidity Inside The Sealed Case.
Features
- Case fits 684 rounds of 9mm ammo, and the included moisture removing silica gel canister
- Engineered to maximize Long Term Storage. The case is airtight and the silica gel will soak up humidity inside the sealed case
- Ammo is held by 3 foam trays, allowing for triple capacity.
- 2 metal-reinforced padlockable holes are available for added security (padlock not included). A built in pressure relief valve allows the case to be opened at any altitude.
- See more on Amazon...
Brand: Case Club
See On Amazon #3
Case Club Pre-Cut Carrying Rifle Case to Fit Specific Rifle
Asin: B075VBGMQ8 | Model: Case | PartNumber: Case | Ean: 0850939008000 | UPC: 850939008000
Pre-Cut Foam Is Closed Cell Polyethylene That Will Last A Lifetime. Use The Included Blade To Connect The Perforations So You Can Accommodate Your Unique Setup. If You Do Not Need To Remove A Specific Perforation, Simply Leave It In Place..
Does Not Fit Pinned/Fixed/Full Stocks. Does Not Fit Side Mounted Lasers, Flashlights, Etc. Product Is Case With Pre-Cut Foam, Items Imaged In Foam Are Not Included..
Will Accommodate Optics Up To 3.70" In Height, Plus Under-Barrel Or Over-Barrel Lasers, Flashlights, And Foregrips..
Features
- Case with Pre-Cut foam for the imaged style of rifle (with collapsing buttstock). Check out the "Pre-Cut Diagram" to see all the cutout locations! The maximum allowable overall length of the rifle is 39.5". The case also holds a pistol, x2 (standard or pmag) 30rd 5.56/.223 magazines, and x3 pistol magazines. A built in extra pocket will hold loose gear such as safety equipment and tools.
- Will accommodate optics up to 3.70 in height, plus under-barrel or over-barrel lasers, flashlights, and foregrips.
- Pre-cut Foam is closed cell polyethylene that will last a lifetime. Use the included blade to connect the perforations so you can accommodate your unique setup. If you do not need to remove a specific perforation, simply leave it in place.
- Does not fit pinned/Fixed/Full stocks. Does not fit side mounted lasers, flashlights, etc. Product is case with pre-cut foam, items imaged in foam are not included.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 5.00 x 41.50 x 15.00 inches
See On Amazon #4
Case Club 8 Pistol and 12 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust
Asin: B08YJ5WS1Q | Model: 8 Pistol Case | PartNumber: 8 Pistol Case | Ean: 0850021069810 | UPC: 850021069810
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Case Is Ideal For Police Departments, Military, Firearm Instructors & Those Who Have Large Pistol Collections..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 8 semi-auto pistols, 12 magazines (+8 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- Case is ideal for police departments, military, firearm instructors & those who have large pistol collections.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #5
Case Club Magazine Storage Box for Rifle (5.56/.223) & Pistol (Double Stack & Single Stack)
Asin: B086RC9ML9
Case Is Water Resistant With An O-Ring Seal, Perfect For Long Term Dry Storage.
Case Is Padlockable For Added Security, Padlocks Not Included.
Extra Storage On Top Of Box For Added Versatility.
Features
- Holds .223/5.56 Magazines (x15) and 10 (single stack or double stack) pistol magazines
- Extra storage on top of box for added versatility
- Case is water resistant with an o-ring seal, perfect for long term dry storage
- Case is padlockable for added security, padlocks not included
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 7.75 x 15.00 x 10.25 inches
See On Amazon #6
Case Club 4 Pistol and 16 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K7L4GXY | Model: 4 Pistol Case | PartNumber: 4 Pistol Case | Ean: 0856792005071 | UPC: 856792005071
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 4 Pistol Version To A 3 Pistol & Accessory Version By Removing The Pistol Module & Freeing Up Room For Ammunition & Safety Gear. Quickly Convert It Back To The 4 Pistol Version Anytime By Putting The Module Back In. Dual Purpose Foam Design Allows For Two Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 4 pistols, 16 magazines (+4 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two metal reinforced padlock points that support a customer supplied padlock with a 0.3" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 4 pistol version to a 3 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 4 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club
See On Amazon #7
Case Club 6 Pistol and 21 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K7LFJN0 | Model: 6 Pistol Case | PartNumber: 6 Pistol Case | Ean: 0856792005095 | UPC: 856792005095
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used Even With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 6 Pistol Version To A 5 Pistol & Accessory Version By Removing The Pistol Module & Freeing Up Room For Ammunition & Safety Gear. Quickly Convert It Back To The 6 Pistol Version Anytime By Putting The Module Back In. Dual Purpose Foam Design Allows For Two Different Configurations!.
Case Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 6 pistols, 21 magazines (+6 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 6 pistol version to a 5 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 6 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used even with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #8
Case Club x20 Rifle Magazine (.223/5.56) Storage Box Lockable, Water-Resistant with Top Storage Compartment
Asin: B07DCZNW7D | Ean: 0850939008130 | UPC: 850939008130
Case Is Water Resistant With A Built In Gasket Seal, Perfect For Long Term Dry Storage Or Rainy Days. Handle Folds Down When Not In Use..
Case Is Padlockable For Added Security, Padlocks Not Included..
Precision Cut Plastic Dividers Separate Magazines For Unparalleled Organization. Extremely Compact Design Leaves No Wasted Space..
Accessory Compartment Is Built Into The Top For Extra Storage Space. Mechanical "Claw" Latch Holds Down The Lid Tight..
Features
- Holds up to 20 (.223/5.56) magazines in water resistant storage box. Compatible with 10, 20, and 30 round magazines (even with ranger plates and dust covers).
- Accessory compartment is built into the top for extra storage space. Mechanical claw latch holds down the lid tight.
- Case is water resistant with a built in gasket seal, perfect for long term dry storage or rainy days. Handle folds down when not in use.
- Precision cut plastic dividers separate magazines for unparalleled organization. Extremely compact design leaves no wasted space.
- Case is padlockable for added security, padlocks not included.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 7.75 x 15.00 x 10.25 inches | Weight: 2.67 pounds
See On Amazon #9
Case Club 2 Pistol & 18 Magazine Case with Accessory Pocket. Pre-Cut, Heavy Duty, Waterproof with Silica Gel for Gun Rust Prevention (Upgraded Gen-2)
Asin: B00K7JHWD2 | Ean: 0856792005040 | UPC: 856792005040
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 2 Pistol Accessory Version To A 2 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Module. Adding The Module Increases Magazine Capacity To 18. Quickly Convert It Back To The 2 Pistol With Larger Accessory Pocket Version Anytime By Removing The Module. Dual Purpose Foam Design Allows For Two Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 2 pistols and (up to) 18 magazines with magazine module or 6 magazines with expanded accessory pocket (+2 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 2 pistol accessory version to a 2 pistol with increased magazine capacity version by adding/leaving in, the magazine module. Adding the module increases magazine capacity to 18. Quickly convert it back to the 2 pistol with larger accessory pocket version anytime by removing the module. Dual purpose foam design allows for two different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #10
Case Club 5 Pistol & (up to) 30 Magazine Case with Accessory Pocket. Pre-Cut, Heavy Duty, Waterproof, with Silica Gel for Gun Rust Prevention (Upgraded Gen-2)
Asin: B00K7M261M | Model: 5 Pistol & Accessory Case | PartNumber: 5 Pistol & Accessory Case | Ean: 0856792005101 | UPC: 856792005101
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 5 Pistol & Accessory Version To A 5 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Modules. Adding 1 Module Increases Magazine Capacity To 26 While Adding Both Modules Increases It To 30. Quickly Convert It Back To The 5 Pistol & Accessory Version Anytime By Removing The Modules. Dual Purpose Foam Design Allows For Three Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 5 pistols and (up to) 30 magazines with magazine modules or 18 magazines with accessory pocket (+5 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 5 pistol & accessory version to a 5 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 26 while adding both modules increases it to 30. Quickly convert it back to the 5 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #11
Case Club 3 Pistol & Accessory & Up to 23 Magazines Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust (Gen 2)
Asin: B00K7K66CY | Model: 3 Pistol & Accessory Case | PartNumber: 3 Pistol & Accessory Case | Ean: 0856792005057 | UPC: 856792005057
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 3 Pistol & Accessory Version To A 3 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Modules. Adding 1 Module Increases Magazine Capacity To 17 While Adding Both Modules Increases It To 23. Quickly Convert It Back To The 3 Pistol & Accessory Version Anytime By Removing The Modules. Dual Purpose Foam Design Allows For Three Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 3 pistols and (up to) 23 magazines with magazine modules or 9 magazines with accessory pocket (+3 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 3 pistol & accessory version to a 3 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 17 while adding both modules increases it to 23. Quickly convert it back to the 3 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club
See On Amazon #12
Case Club 2 Pistol Holder .50 Cal Ammo Can Foam (Pre-Cut, Closed Cell, Military Grade Foam)
Asin: B00K8GWRYI | Ean: 0856792005149 | UPC: 856792005149
Foam Insert Is (Closed Cell) Military Grade Polyethylene Which Can Be Wiped Clean.
Set Includes 3 Pieces. Soft Lid Foam, Denser Base Foam With Cutouts, Dense Flatpad For The Bottom.
Max Length Of Pistols Is 8 5/8" & Not Intended For Revolvers, Foam Dimensions: 11"X5.625".
Holds Two Semi-Auto Pistols And Four Magazines.
Features
- Foam only, ammo can is NOT included with order
- Holds two semi-auto pistols and four magazines
- Foam insert is (closed cell) military grade polyethylene which can be wiped clean
- Max length of pistols is 8 5/8 & not intended for revolvers, Foam Dimensions: 11x5.625
- Set includes 3 pieces. Soft lid foam, denser base foam with cutouts, dense flatpad for the bottom
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Weight: 0.42 pounds
See On Amazon #13
Case Club Case fits Kel-Tec KSG and Standard Manufacturing DP-12 in Pre-Cut Waterproof Shotgun Case with Accessory Box and Silica Gel to Help Prevent Gun Rust (Gen 2)
Asin: B016041XSM | Ean: 0856792005460 | UPC: 856792005460
Foam Insert Is (Closed Cell) High Grade Polyethylene Which Can Be Wiped Clean.
Moisture Removing Silica Gel Canister & Waterproof Accessory Box Are Included.
Case Is Airline Approved For Checked Luggage, Padlockable, Fully Shippable & Dustproof.
Also Holds Extra Magazines, A Pistol, Optics, Shotgun Attachments, & Various Accessories.
Features
- Pre-customized foam fits Kel-Tec KSG (Original, Compact, or Tactical) or Standard Manufacturing Company DP-12 Shotgun. Does not fit KSG25.
- Also holds extra magazines, a pistol, optics, shotgun attachments, & various accessories
- Foam insert is (closed cell) high grade polyethylene which can be wiped clean
- Case is Airline Approved for checked luggage, padlockable, fully shippable & dustproof
- Moisture removing silica gel canister & waterproof accessory box are included
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 5.50 x 40.00 x 16.00 inches
See On Amazon #14
Case Club 7 Pistol and 14 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K8BB8ZM | Model: 7 Pistol Case | PartNumber: 7 Pistol Case | Ean: 0856792005118 | UPC: 856792005118
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Case Is Ideal For Police Departments, Military, Firearm Instructors & Those Who Have Large Pistol Collections..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 7 semi-auto pistols, 14 magazines (+7 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- Case is ideal for police departments, military, firearm instructors & those who have large pistol collections.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #15
Case Club 4 Pistol and (up to) 29 Magazine with Accessory Pocket Pre-Cut Heavy Duty Waterproof Case with Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
Asin: B00K7ENO6G | Ean: 0856792005019 | UPC: 856792005019
Accommodates Full Size, Compact & Subcompact Pistols With Under-Barrel Attachments And Small Reflex Sights. Foam Also Has Built-In Height And Length Adjustment Blocks In Which You Can Use To Further Customize The Fit Ensuring Even Your Smallest Subcompact Pistols Fit Just As Tightly As Your Full Size Ones. Max Length Of Pistols Is 8 5/8" & Is Not Intended For Revolvers Due To Their Longer Barrel Lengths..
Pistols Sit In A Quick Draw Position So The Guns Can Be Picked Up Properly By Their Grip In A Safe Manner. Wide Bodied Snap Latches Can Be Used With Thick Gloves. Extended Front Handle Length Helps Counter Balance Off Center Weighted Loads. All Latch & Hinge Pins Are Stainless Steel. Injected Molded Case Shell With Integrated Exterior Structural Ribs Increase Durability And Provide Deflection Points Making This Fully Ata Approved And Compliant In All 50 States..
Easily Convert The Case From A 4 Pistol & Accessory Version To A 4 Pistol With Increased Magazine Capacity Version By Adding/Leaving In, The Magazine Modules. Adding 1 Module Increases Magazine Capacity To 21 While Adding Both Modules Increases It To 29. Quickly Convert It Back To The 4 Pistol & Accessory Version Anytime By Removing The Modules. Dual Purpose Foam Design Allows For Three Different Configurations For The Price Of One!.
Case Has A Lifetime Warranty, Is 100% Waterproof (Ip67) & Dustproof With A Built-In Pressure Release Valve. Base Foam Is Heavy Duty, Non-Abrasive, Pre-Cut, Mil-Spec, Closed Cell Polyethylene Which Won't Absorb Moisture Or Oil. Magazine Compartments Are Dual Level & Will Fit Both Single & Double Stack Mags Of Varying Lengths. Utilize Our Specially Designed Magazine Spacers For Your Single Stack Mags And Remove The Spacer For Double Stack Guaranteeing A Perfect Fit Regardless Of Magazine Size..
Features
- Holds 4 pistols and (up to) 29 magazines with magazine modules or 12 magazines with accessory pocket (+5 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8 & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 4 pistol & accessory version to a 4 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 21 while adding both modules increases it to 29. Quickly convert it back to the 4 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #16
Case Club Fits IWI Tavor TS12 Shotgun in Pre-Cut Carry Case
Asin: B099XCSNMJ | Ean: 0850031432239 | UPC: 850031432239
Foam Insert Is (Closed Cell) High Grade Polyethylene Which Can Be Wiped Clean.
Case Is Padlockable (With Customer Supplied Padlock).
Also Holds Up To 51 Extra Shotgun Shells (Or Accessories) And 2 Pistol Magazines.
Features
- Fits IWI Tavor TS12 and a semi-auto pistol. Accommodates shotgun optics, pistol optics, and pistol underbarrel attachments.
- Also holds up to 51 extra shotgun shells (or accessories) and 2 pistol magazines
- Foam insert is (closed cell) high grade polyethylene which can be wiped clean
- Case is padlockable (with customer supplied padlock)
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
Dimensions: 5.25 x 41.75 x 15.50 inches
See On Amazon #17
Case Club x130 .38 Special or .357 Magnum Long Term Storage Case with Silica Gel Dessicant, Lockable
Asin: B0B57TTFXR | Model: CC56SE38SPL | PartNumber: CC56SE38SPL | Ean: 0810114970089 | UPC: 810114970089
Built In Key Locking Latch For Added Security, Includes 2 Keys. Built In Pressure Relief Valve So The Case Can Be Opened In Any Altitude..
Clear Lid And Base For Easy Visual Of Case Contents Exterior Structural Ribs For Added Strength..
Engineered To Maximize Long Term Storage. The Case Is Airtight And The Silica Gel Will Soak Up Humidity Inside The Sealed Case.
Features
- Case fits 130 rounds of .38 Special or .357 Magnum ammo, and the included moisture removing silica gel canister
- Engineered to maximize Long Term Storage. The case is airtight and the silica gel will soak up humidity inside the sealed case
- Built in key locking latch for added security, includes 2 keys. Built in pressure relief valve so the case can be opened in any altitude.
- Clear Lid and Base for easy visual of case contents Exterior structural ribs for added strength.
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #18
Case Club Sporting & Hunting Shotgun Pre-Cut Waterproof Case with Accessory Box and Silica Gel to Help Prevent Gun Rust (Gen 2)
Asin: B01LYF1O8U | Ean: 0856792005736 | UPC: 856792005736
Moisture Removing Silica Gel Canister & Waterproof Accessory Box Are Included.
Case Is Airline Approved For Checked Luggage, Wheeled, Padlockable, Fully Shippable & Dustproof.
Foam Insert Is (Closed Cell) Military Grade Polyethylene Which Can Be Wiped Clean.
Also Holds Pistol, Magazine, Extra Shells, Silica Gel Canister, Waterproof Box, & Various Accessories.
Features
- Waterproof case comes with precut foam to hold almost any Sporting or Hunting Shotgun
- Also holds pistol, magazine, extra shells, silica gel canister, waterproof box, & various accessories
- Moisture removing silica gel canister & waterproof accessory box are included
- Foam insert is (closed cell) military grade polyethylene which can be wiped clean
- Case is Airline Approved for checked luggage, wheeled, padlockable, fully shippable & dustproof
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon #19
Case Club 10 Pistol Pre-Cut Waterproof Case with 2 Silica Gel Canisters to Help Prevent Gun Rust (Wheeled)
Asin: B07WJJ19G6
Do Not Settle For Cheap And Flimsy Diced Foam! Diced Foam Tears Easily, Retains Water (Rust!), Collects Dirt, And Even If Left Untouched Will Eventually Disintigrate Right Into Your Gun! Case Club Foam Is Closed-Cell Military-Grade Polyethylene, Which Does Not Absorb Liquids, Does Not Tear Easily, Lasts A Lifetime, Can Be Cleaned Easily, And Will Not Disintegrate..
Max Length Of Pistols Is 8 5/8" & Not Intended For Revolvers.
Case Is Airline Approved For Checked Luggage & Padlockable.
Case Has A Lifetime Warranty & Is 100% Waterproof & Dustproof.
Features
- Holds up to 10 pistols with 10 extra magazine & 2 included silica gels
- Case has a lifetime warranty & is 100% Waterproof & Dustproof
- DO NOT SETTLE for cheap and flimsy diced foam! Diced foam tears easily, retains water (rust!), collects dirt, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, which does NOT absorb liquids, does NOT tear easily, lasts a lifetime, can be cleaned easily, and will NOT disintegrate.
- Case is Airline Approved for checked luggage & padlockable
- Max length of pistols is 8 5/8 & not intended for revolvers
- See more on Amazon...
Brand: Case Club | Manufacturer: Case Club
See On Amazon
Looking For Something Else?
Search