Adafruit 2.4GHz Mini Flexible WiFi Antenna with UFL Connector - 100mm
Asin: B01E43VXO0 | Model: BC34637 | PartNumber: BC34637 | Ean: 0743724369472 | UPC: 743724369472
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Works Fantastically With Just About Any 2.4-2.5Ghz Wireless Receiver/Transmitter.
No More Need For Additional Adapters To Get Your Iot Cloud Flying High.
Approx. 4Dbi Gain And A 50O Impedance.
Features
- 4" long flexible uFL 2.4GHz antenna
- Approx. 4DBi gain and a 50O impedance
- Works fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter
- No more need for additional adapters to get your IoT cloud flying high
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.01 Pounds
See On Amazon Similar To Adafruit 2.4GHz Mini Flexible WiFi
#1
Adafruit ATWINC1500 WiFi Breakout
Asin: B01GVI1NKA | Model: 2999 | PartNumber: 2999 | Ean: 0748347530650, 0743724369304 | UPC: 748347530650, 743724369304
Since This Is Our New Favoritest Spi-Protocol Wifi Module We've Decided To Make A Little Breakout For It. The Breakout Comes With Level Shifting On All The Input Pins So You Can Use It With 3V Or 5V Logic. A 3.3V Voltage Regulator That Can Handle The 300Ma Spikes Lets You Power From 3-5.5Vdc..
There's Also 3 Leds That You Can Control Over The Spi Interface (Part Of The Library Code) Or You Can Have Controlled By The Arduino Library. They'll Light Up When Connected To An Ssid, Or Transmitting Data..
This Module Works With 802.11B, G, Or N Networks & Supports Wep, Wpa And Wpa2 Encryption. You Can Use It In Soft Ap Mode To Create An Ad-Hoc Network. For Secure Client Connections, There Is Tls 1.2 Support In Firmware 19.4.4!.
Features
- The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino M0's and M4s but does not work on Uno (328P) and may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds.
- This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!
- Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC.
- There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data.
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 3.74 x 2.56 inches | Weight: 0.04 Pounds
See On Amazon #2
WiFi / 802.11 Development Tools Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500
Asin: B01D0Z801W | Model: 8541552875 | PartNumber: 8541552875 | Ean: 5060627393027, 8436565500266
Brand: Adafruit
Dimensions: 0.39 x 2.76 x 1.57 inches
See On Amazon
Looking For Something Else?
Search