Adafruit (PID 3010 Feather M0 WiFi - ATSAMD21 + ATWINC1500
Asin: B01F6GJVL6 | Ean: 0717520028581 | UPC: 717520028581
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Stream More Reliably (Less 'Bursty') With The Atwinc..
The Atwinc Has Much Lower Power Usage, About 12Ma For The Winc & 10Ma For The Atsamd21 With Auto-Power Management On For The Wifi And No Power Management For The Arm..
Features
- A highly-capable Cortex M0+ processor with ton more I/O pins, lots of 12-bit ADCs, a 10-bit DAC, 6 total SERCOMs that can each do SPI, I2C or UART (3 are used by the existing interfaces, leaving you 3), plenty of timers, PWMs, DMA, native USB, and more
- The ATWINC has much lower power usage, about 12mA for the WINC & 10mA for the ATSAMD21 with auto-power management on for the WiFi and no power management for the ARM.
- Stream more reliably (less 'bursty') with the ATWINC.
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.00 Pounds
See On Amazon Similar To Adafruit PID 3010 Feather M0
#1
Adafruit HUZZAH32 ESP32 Feather Board
Asin: B01NCRYHDL | Model: 2058 | PartNumber: 2058 | Ean: 0602401813243 | UPC: 602401813243
Integrated 802.11B/G/N Ht40 Wi-Fi Transceiver, Baseband, Stack And Lwip.
4 Mbyte Flash Include In The Wroom32 Module.
Integrated Dual Mode Bluetooth (Classic And Ble).
Integrated 520 Kb Sram.
Features
- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth (classic and BLE)
- 4 MByte flash include in the WROOM32 module
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.20 x 2.00 x 0.90 inches | Weight: 0.01 Pounds
See On Amazon #2
Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4
Asin: B07FB365TQ | Ean: 7442870791412
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #3
ESP32-S2 Reverse TFT Feather Ada 5345
Asin: B0BZZXVD29
Color 1.14" Ips Tft With 240X135 Pixels - Bright And Colorful Display With St7789 Chipset That Can Be Viewed At Any Angle..
Stemma Qt Connector For I2c Devices, With Switchable Power, So You Can Go Into Low Power Mode..
Lipoly Battery Monitor - Max17048 Chip Actively Monitors Your Battery For Voltage And State Of Charge / Percentage Reporting Over I2c.
Reset And Dfu (Boot0) Buttons To Get Into The Rom Bootloader (Which Is A Usb Serial Port So You Don't Need A Separate Cable!).
Power Options - Usb Type C Or Lipoly Battery.
Built-In Battery Charging When Powered Over Usb-C.
Three User Tactile Buttons - D0, D1, And D2. D0/Boot0 Is Also Used For Entering Rom Bootloader Mode If Necessary..
Serial Debug Output Pin (Optional, For Checking The Hardware Serial Debug Console).
Mini Module Has Fcc/Ce Certification And Comes With 4 Mbyte Of Flash And 2 Mbyte Of Psram - You Can Have Huge Data Buffers.
Features
- ESP32-S2 240MHz Tensilica processor - the next generation of ESP32, now with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc!
- Mini module has FCC/CE certification and comes with 4 MByte of Flash and 2 MByte of PSRAM - you can have huge data buffers
- Color 1.14 IPS TFT with 240x135 pixels - bright and colorful display with ST7789 chipset that can be viewed at any angle.
- Three User Tactile buttons - D0, D1, and D2. D0/BOOT0 is also used for entering ROM bootloader mode if necessary.
- Power options - USB type C or Lipoly battery
- Built-in battery charging when powered over USB-C
- LiPoly battery monitor - MAX17048 chip actively monitors your battery for voltage and state of charge / percentage reporting over I2C
- Reset and DFU (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don't need a separate cable!)
- Serial debug output pin (optional, for checking the hardware serial debug console)
- STEMMA QT connector for I2C devices, with switchable power, so you can go into low power mode.
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #4
Adafruit Feather RP2040 Ada 4884
Asin: B0929FSTVR | Model: 4017 | PartNumber: 4017 | Ean: 5060627399029, 5904422346423
Rp2040 32-Bit Cortex M0+ Dual Core Running At ~125 Mhz @ 3.3V Logic And Power.
8 Mb Spi Flash Chip For Storing Files And Circuitpython/Micropython Code Storage. No Eeprom.
264 Kb Ram.
Light As A (Large?) Feather - 5 Grams.
Features
- Measures 2.0" x 0.9" x 0.28" (50.8mm x 22.8mm x 7mm) without headers soldered in
- Light as a (large?) feather - 5 grams
- RP2040 32-bit Cortex M0+ dual core running at ~125 MHz @ 3.3V logic and power
- 264 KB RAM
- 8 MB SPI FLASH chip for storing files and CircuitPython/MicroPython code storage. No EEPROM
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 3.15 x 0.39 x 4.72 Inches | Weight: 0.00 pounds
See On Amazon #5
Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz
Asin: B01MRY3ETX | Model: 165 | PartNumber: 165 | Ean: 0602401813519, 3700386531781, 0748347531114 | UPC: 748347531114, 602401813519
Use License-Free Ism Bands.
Simple Wire Antenna Or Spot For Ufl Connector.
+5 To +20 Dbm Up To 100 Mw Power Output Capability (Selectable In Software).
Packet Radio With Ready-To-Go Arduino Libraries.
Features
- SX127x LoRa based module with SPI interface
- Packet radio with ready-to-go Arduino libraries
- Use license-free ISM bands
- +5 to +20 dBm up to 100 mW Power Output Capability (selectable in software)
- Simple wire antenna or spot for uFL connector
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.30 x 2.00 x 0.90 inches | Weight: 0.01 Pounds
See On Amazon #6
ESP32-S2 Feather - 2 MB PSRAM and Stemma QT/Qwiic Adafruit 5000
Asin: B09MBLN5V7 | Model: 5000 | PartNumber: 5000
Serial Debug Output Pin (Optional, For Checking The Hardware Serial Debug Console).
Arduino Or Circuitpython Compatible.
Low Power Friendly! In Deep Sleep Mode We Can Get Down To 80~100Ua Of Current Draw From The Lipoly Connection. Quiescent Current Is From The Power Regulator, Esp32-S2 Chip, And Lipoly Monitor. Turn Off The Neopixel And External I2c Power For The Lowest Quiescent Current Draw..
Mini Module Has Fcc/Ce Certification And Comes With 4 Mbyte Of Flash And 2 Mbyte Of Psram - You Can Have Huge Data Buffers.
Features
- ESP32-S2 240MHz Tensilica processor - the next generation of ESP32, now with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc!
- Mini module has FCC/CE certification and comes with 4 MByte of Flash and 2 MByte of PSRAM - you can have huge data buffers
- Serial debug output pin (optional, for checking the hardware serial debug console)
- Low Power friendly! In deep sleep mode we can get down to 80~100uA of current draw from the Lipoly connection. Quiescent current is from the power regulator, ESP32-S2 chip, and Lipoly monitor. Turn off the NeoPixel and external I2C power for the lowest quiescent current draw.
- Arduino or CircuitPython compatible
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.30 x 2.10 x 0.90 inches
See On Amazon #7
Adafruit (PID 3591) HUZZAH32 ESP32 Feather Board (pre-soldered)
Asin: B079QGXX88 | Model: 8541612388 | PartNumber: 8541612388 | Ean: 0791954231892 | UPC: 791954231892
Recommended For Makers Who Have Some Experience With Microcontroller Programming..
Pre-Assembled Headers.
Esp32 Has Way More Gpio Than The Esp8266.
Features
- Module is nestled in at the end of this Feather contains a dual-core ESP32 chip
- ESP32 has way more GPIO than the ESP8266
- Recommended for makers who have some experience with microcontroller programming.
- Pre-assembled headers
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.19 Pounds
See On Amazon #8
Adafruit Feather M0 Adalogger
Asin: B01A5013XM | Model: 2796 | PartNumber: 2796 | Ean: 0743724369250 | UPC: 743724369250
No Eeprom.
Usb Native Support, Comes With Usb Bootloader And Serial Port Debugging.
3.3V Regulator With 500Ma Peak Current Output.
256Kb Of Flash + 32Kb Of Ram.
Features
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- 256KB of FLASH + 32KB of RAM
- No EEPROM
- 3.3V regulator with 500mA peak current output
- USB native support, comes with USB bootloader and serial port debugging
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.28 x 2.00 x 0.90 inches | Weight: 0.01 Pounds
See On Amazon #9
Adafruit Power Relay FeatherWing [ADA3191]
Asin: B071DP71VG | Model: 8541585706 | PartNumber: 8541585706 | Ean: 0604776613169 | UPC: 604776613169
Works With All/Any Of Our Feather Boards, Just Wire Up The Relay Control Pin To Whatever Gpio You Like.
Connect A Featherwing On Top Of Your Feather Board With Feather Stacking Headers Or Feather Female Headers.
Compared To Adafruit's Smaller Relay Featherwings, This Can Handle A Beefy 1200 Watts.
Features
- Turn on and off lamps, fans, solenoids, and other small appliances(up to 250VAC or DC power) using any Feather board
- Compared to Adafruit's smaller Relay FeatherWings, this can handle a beefy 1200 Watts
- Works with all/any of our Feather boards, just wire up the relay control pin to whatever GPIO you like
- Connect a FeatherWing on top of your Feather board with Feather Stacking Headers or Feather Female Headers
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.04 pounds
See On Amazon #10
Adafruit (PID 3176 Feather M0 RFM69HCW Packet Radio - 868 or 915 MHz
Asin: B01K62LWBC | Model: NA | PartNumber: NA | Ean: 0717520029571 | UPC: 717520029571
3.3V Regulator With 500Ma Peak Current Output. Built In 100Ma Lipoly Charger With Charging Status Indicator Led.
Hardware Serial, Hardware I2c, Hardware Spi Support 8 X Pwm Pins 10 X Analog Inputs 1 X Analog Output.
Usb Native Support, Comes With Usb Bootloader And Serial Port Debugging You Also Get Tons Of Pins - 20 Gpio Pins.
Atsamd21g18 @ 48Mhz With 3.3V Logic/Power No Eeprom.
Features
- Measures 2.0" x 0.9" x 0.3" (51mm x 23mm x 8mm) without headers soldered in Light as a (large?) feather - 5.8 grams
- ATSAMD21G18 @ 48MHz with 3.3V logic/power No EEPROM
- 3.3V regulator with 500mA peak current output. Built in 100mA lipoly charger with charging status indicator LED
- USB native support, comes with USB bootloader and serial port debugging You also get tons of pins - 20 GPIO pins
- Hardware Serial, hardware I2C, hardware SPI support 8 x PWM pins 10 x analog inputs 1 x analog output
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 Inches | Weight: 0.03 Pounds
See On Amazon
Looking For Something Else?
Search