Inkbird Digital Pre-Wired Outlet Dual Stage Humidity Controller IHC-200 for Mushroom Ventilator Fan Crawl Space Curing Meat Grow Room Tent Humidifier Dehumidifier.
Asin: B01FQKXRXA | Model: IHC-200 | PartNumber: IHC-200 | Ean: 8931042126583
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Two Modes] Dual Outlet, You Can Switch Different Modes Between Humidification And Dehumidification Automatically..
[Multiple Protection] Alarm When Humidity Exceeds High/Low Humidity Setting Value; Alarm When Sensor Error Or Humidity Exceeds Limit.Delay Protection For Output..
[Application] Widely Used With Mushroom, Mini Greenhouse, Ventilator Fan, Crawl Space, Turtle Enclosure, Curing Chamber, Seed Germination, Etc..
[Humidity Control Range] 5~99.99%Rh; Control Accuracy: ±3%Rh. Refresh Rate: 0.5S. Power Supply: 10A 110V 1100W..
Features
- [Simple and convenient designed]Plug and play, dual LED screens enabling more humanized 3 buttons for easy use. And you can install it on the wall.
- [Humidity Control Range] 5~99.99%RH; Control accuracy: 3%RH. Refresh rate: 0.5s. Power supply: 10A 110V 1100W.
- [Two modes] Dual outlet, you can switch different modes between humidification and dehumidification automatically.
- [Application] Widely used with mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing chamber, seed germination, etc.
- [Multiple protection] Alarm when humidity exceeds high/low humidity setting value; Alarm when sensor error or humidity exceeds limit.Delay protection for output.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird tech
Dimensions: 6.70 x 2.60 x 2.60 inches
See On Amazon Similar To Inkbird Digital PreWired Outlet Dual
#1
Inkbird WiFi ITC-308 Digital Temperature Controller Thermostat Remote Monitoring Controlling Home Brewing Fermentation Breeding Incubation Greenhouse
Asin: B07PVBG8K1 | Model: ITC-308 WiFi | PartNumber: ITC-308 WiFi
👍👍【High/Low Temperature Alarm】 Set High/Low Temperature Alarm When The Temperature Is Over Or Under Preset Temperature Or The Sensor Experiences A Malfunction..
👍👍【1100W Max Output】Maximum Output Load: 1100W(110V).【Safety】Maximum Output Load: 1100W(110V). Customize Temperature And Compressor Delay, Protecting Your Refrigeration/Heating Equipment..
👍👍【Convenient Design】Plug-N-Play, Easy To Use. Supports ℃/℉Reading And Temperature Calibration..
👍👍【Dual Relay Output】Dual Relay - Able To Power Refrigeration And Heating Equipment As Conditions Change..
Features
- Android & IOS WIFI App WIFI APP - WIFI smart controller supports both IOS & Android. WIFI connection supports 2.4GHz Wi-Fi band with free INKBIRD APP to control the temperature remotely.
- Dual Relay Output Dual relay - able to power refrigeration and heating equipment as conditions change.
- High/Low Temperature Alarm Set High/Low temperature alarm when the temperature is over or under preset temperature or the sensor experiences a malfunction.
- Convenient Design Plug-n-play, easy to use. Supports / reading and Temperature calibration.
- 1100W Max Output Maximum output load: 1100W(110V). Safety Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
Dimensions: 6.70 x 1.20 x 2.60 inches | Weight: 1.00 pounds
See On Amazon #2
Inkbird ITC-308S Aquarium Heating and Cooling Dual Stage Temperature Controller Freshwater Saltwater Aquarium Tropical Fish Ornamental Shrimp
Asin: B07R195CQF
💦💦【Dual Display Window】Easy To Set Up,Be Able To Display Measured Temperature And Set Temperature At The Same Time.Provides A Temperature Display Of Celsius Or Fahrenheit..
💦💦【Term Of Service】Purchase Products And Get A One-Year Warranty..
💦💦【Alarm For Safe】High And Low Temperature Alarms,Sensor Failure Alarm. Maximum Output Load: 1200W(110V)..
💦💦【Applicable Scene】Because It Has The Powerful Function Of Corrosion Protection, It Is Very Suitable For Fresh Water, Sea Water Aquarium, Coral Cylinder, Ornamental Shrimp And Tropical Fish..
Features
- Heating and Cooling Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
- Applicable Scene Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
- Dual Display Window Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
- Alarm for Safe High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
- Term of service Purchase products and get a one-year warranty.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
Dimensions: 1.20 x 6.70 x 2.60 inches
See On Amazon #3
Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and 24 Hours Digital Day & Night Cycle Timer Controller for Seed Germination Reptiles Hatching
Asin: B01486LZ50 | Model: Itc-306t | PartNumber: Itc-306t | Ean: 0705701584995, 0705701506386 | UPC: 705701584995, 705701506386
👏👏【Dual Time Cycle Setting】Can Be Set Different Temperature From Day And Night On The Basis Of The Physical Needs Of Animals And Plants During 24 Hours..
👏👏【Sensor Length 】2M / 6.56Ft.
👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please Note It Is Only Heating Controller Without Cooling Function. Both Of The Plugs Can Control The Heating. But Totally Could Not Over 1200W..
👏👏【Dual Display Window】Be Able To Display Measured Temperature And Set Temperature At The Same Time.Temperature Calibration, Over-Temperature And Sensor Fault Alarm. Maximum Output Load: 1200W (110V)..
Features
- Convenient Design Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- Dual Display Window Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
- Dual Time Cycle Setting Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- Only Heating Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- Sensor Length 2m / 6.56ft
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbirf Tech
See On Amazon #4
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays (ITC-1000).
Asin: B00OXPE8U6 | Model: ITC-1000 | PartNumber: ITC-1000 | Ean: 0701056809363, 0701056828906, 7466656001045, 0709803350489, 7535001363029 | UPC: 709803350489, 701056828906, 701056809363
2 Relays, Switch Between Cooling And Heating Modes.
Temperature Calibrating, Refrigerating Control Output Delay Protection.
Control The Temperature By Setting The Temperature Set Value And The Difference Value.
Alarm When Temperature Exceeds The Limit Or When Sensor Error.
Features
- Fahrenheit and Celsius Display Can Be Choose
- Alarm When Temperature Exceeds the Limit or When Sensor Error
- 2 Relays, Switch Between Cooling and Heating Modes
- Control the Temperature by Setting the Temperature Set Value and the Difference Value
- Temperature Calibrating, Refrigerating control output delay protection
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird Tech
Dimensions: 1.49 x 3.77 x 3.93 inches | Weight: 0.49 pounds
See On Amazon #5
Inkbird ITC-308 Digital Temperature Controller Outlet Thermostat 2-Stage 1100W with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding Growing
Asin: B011296704 | Model: ITC-308 | PartNumber: ITC-308 | Ean: 0705701511540, 0705701572695 | UPC: 705701511540, 705701572695
Support Reading With Centigrade Or Fahrenheit Unit.
Dual Display Window, Be Able To Display Measured Temperature And Set Temperature At The Same Time.
Maximum Output Load: 1100W(110V).
Dual Relay Output, Be Able To Connect With Refrigeration And Heating Equipment At The Same Time.
Features
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird Tech
Dimensions: 2.68 x 5.51 x 1.30 Inches | Weight: 0.77 pounds
Warranty: Manufacturer warranty for 1 year from date of purchase.
See On Amazon #6
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew
Asin: B07GQWY9HM | Model: 246 | PartNumber: 246 | Ean: 0761895321754 | UPC: 761895321754
💙💙Supporting Calibration, Compressor Delay And Saving Reset Setting Values. Centigrade Or Fahrenheit Degree Display, Easy To Set, Pv And Sv Dual Display Windows. And With Compressor Delay For Protecting Cooling Device. Itc-608T Can Save The Original Setting Values In Case Accidentally Power-Off..
💙💙Multifunctional Usage. Temperature And Humidity Controller Itc-608T Can Be Used In Home Brewing (Refrigerator), Fermenting, Greenhouse, Terrarium, Reptile, Planting (Mushroom), Meat Storage And Cooking..
💙💙More Power Up To 1800W. Temperature Control Range Is -40-212°F(-40-100℃), Humidity Display Range Is 5 -99.0%Rh. Max Loading: 120V 15A 1800W. Temperature Senor Is Waterproof While Humidity Sensor Is Not..
💙💙Three In One Multifunctional Temperature And Humidity Control Mode With Dual Relay Output. Itc-608T Can Work As A Temperature Controller, A Humidity Controller, A Temperature And Humidity Controller. First, Only Plug Temperature Sensor With Cooling And Heating Equipment. Second, Only Plug Humidity Sensor With Humidifier And Dehumidifier Equipment. Third, Plug Both Temperature And Humidity Sensor With Cooling/Heating And Humidifier/Dehumidifier Equipment..
Features
- US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
- Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
- Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- More power up to 1800W. Temperature control range is -40-212 F(-40-100 ), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
- Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
Dimensions: 3.34 x 1.37 x 8.10 inches | Weight: 1.34 pounds
See On Amazon #7
Inkbird ITC-306A WiFi Temperature Controller, Wi-Fi Aquarium Thermostat Heater Controller 120V~1200W Temperature Control with Two Probes only for Heater Aquarium Breeding Reptiles Hatching.
Asin: B07X1JT372
🐠🐠 [Continuous Heating Alarm] The Heating Time Can Be Set According To Your Needs From 1 Hour To 72 Hours, The Controller Will Alarm If Water Can Not Be Heated To The Setting Temperature Within The Specified Time. The Temperature Setting Range Is 20.0℃~35.0℃/68.0℉~95.0℉ And The Detectable Temperature Range Is -40℃~100℃/-40℉~212℉..
🐠🐠[App Notification] Pair The Aquarium Temperature Controller With Your Phone Via 2.4Ghz Wi-Fi, The Device Will Alarm If There Are Exceptions. And All Exceptions Will Be Updated To The Inkbird App, The Inkbird App Will Push Notifications To Remind You..
🐠🐠[Plug And Play] The 1100W High-Power Aquarium Temperature Controller Is Compatible With Most Kinds Of Heaters, You Don’T Need To Assemble The Product Yourself, Just Plug And Play..
🐠🐠[Two Probes] Your Fish Might Be In Danger As It Is Hard To Know The Probe Is Broken Immediately If The Temperature Controller Has Only 1 Probe. The Dual Probe Aquarium Temperature Controller Will Alarm If The Temperature Difference Between 2 Probes Is Bigger Than 3℃/5℉, And The Inkbird App Will Push A Notification At The Same Time..
Features
- [Dual Protection] The aquarium temperature controller is equipped with 2 relays to ensure that the power can be turned off under any circumstances, this will protect your fish from being hurt by overheated water. (US Socket Only)
- [Two Probes] Your fish might be in danger as it is hard to know the probe is broken immediately if the temperature controller has only 1 probe. The dual probe aquarium temperature controller will alarm if the temperature difference between 2 probes is bigger than 3 /5 , and the INKBIRD app will push a notification at the same time.
- [Continuous Heating Alarm] The heating time can be set according to your needs from 1 hour to 72 hours, the controller will alarm if water can not be heated to the setting temperature within the specified time. The temperature setting range is 20.0 ~35.0 /68.0 ~95.0 and the detectable temperature range is -40 ~100 /-40 ~212 .
- [Plug and Play] The 1100w high-power aquarium temperature controller is compatible with most kinds of heaters, you don t need to assemble the product yourself, just plug and play.
- [APP Notification] Pair the aquarium temperature controller with your phone via 2.4GHz Wi-Fi, the device will alarm if there are exceptions. And all exceptions will be updated to the INKBIRD APP, the INKBIRD app will push notifications to remind you.
- See more on Amazon...
Brand: Inkbird
Dimensions: 3.60 x 7.50 x 4.10 inches
See On Amazon #8
Inkbird WiFi Heat Mat Reptile Thermostat Controller Temperature Controller with 2 Probes and 2 Outlets, IPT-2CH Thermostat (Max 250W per Outlet).
Asin: B08Y5JDYFY
With This Heat Mat Temperature Controller, Data Charts Or Data Exported, High/Low-Temperature Alarms, And Probe Error Alarms Are Available Via The Inkbird App.
Note: The Wattage On Each Outlet Is 250W Max And Ipt-2Ch Currently Only Supports 2.4Ghz Wifi..
It Can Be An Automatic Thermostat Switch By Simply Plugging With A Heat Mat, Heat Lamp, Or Other Heaters. It Is Also Suitable For Ball Python.
2 Outlets(2 Probes), But Work Individually. It Would Be An Ideal Thermostat For Reptiles If You Have More Than One Terrariums.
Features
- The WiFi reptile thermostat controls the temp remotely. Plug heat mats and you could monitor the temperature via INKBIRD APP easily
- 2 outlets(2 probes), but work individually. It would be an ideal thermostat for reptiles if you have more than one terrariums
- With this heat mat temperature controller, data charts or data exported, high/low-temperature alarms, and probe error alarms are available via the INKBIRD app
- It can be an automatic thermostat switch by simply plugging with a heat mat, heat lamp, or other heaters. It is also suitable for ball python
- Note: the wattage on each outlet is 250W Max and IPT-2CH currently only supports 2.4GHz wifi.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
Dimensions: 3.74 x 1.18 x 3.14 inches
See On Amazon #9
INKBIRD Digital Thermostat Outlet Temperature Controller Outlet Socket Heating/Cooling Control 1200W 10A Backlit Display
Asin: B0CNH2L351
🌡️🌡️Temperature Mode: Just Set Start And Stop Temperatures And It Will Automatically Run In Heating Or Cooling Mode Based On The Set Points. When Start Temperature＞Stop Temperature, It Enters Cooling Mode; When Start Temperature＜Stop Temperature, It Enters Heating Mode..
🌟🌟More Functions: The Ip67 Waterproof Temperature Probe Can Be Inserted Into The Soil Or Submerged In Water, And The Backlit Lcd Screen Makes It Easy To See The Current Temperature And Set Temperatures In The Dark. It Also Supports Temperature Calibration, Factory Reset, Child Lock, And A Memory Function That Can Save All Set Parameters After A Power Failure..
🏠🌱Wide Application: This Temperature Control Socket Is Widely Applicable To Greenhouses, Reptiles, Incubators, Terrariums, Freezers, Refrigerators, Heaters, Home Brewing, Zoos, Fermentation, Heating Mats, And Other Temperature Control Systems, And It Can Be A Timer With Cycle Timing And Countdown..
⏲️⏲️Timing Function: It Features Cycle Time And Countdown Function And Total Of 4 Modes Can Be Selected—P01 Cycle Time Mode, P02 Countdown On Mode, P03 Countdown Off Mode, And P04 Countdown On&Off Mode. Timing Range: 0~99 Hours And 59 Minutes. Please Note That The Temperature Mode And Timing Function Cannot Be Used At The Same Time..
🛡️🛡️Safer In Use: It Supports High And Low Temperature Alarms With Custom Alarm Values For Use Scenarios Requiring More Strict Temperature Control, And The Buzzer Can Be Muted; Also Supports Temperature Calibration And Refrigeration Delay To Maintain Accurate Temperature Control And Safe Use At All Times..
Features
- Plug & Play: Easy to program and safe in use; Supports temperature mode, cycle time mode, and countdown mode, 3 control modes; Temperature control range: -40 ~212 /-40 ~100 ; Output: Max 10A/120V 1200W.
- Safer In Use: It supports high and low temperature alarms with custom alarm values for use scenarios requiring more strict temperature control, and the buzzer can be muted; Also supports temperature calibration and refrigeration delay to maintain accurate temperature control and safe use at all times.
- Temperature Mode: Just set START and STOP temperatures and it will automatically run in heating or cooling mode based on the set points. When Start Temperature Stop Temperature, it enters cooling mode; when Start Temperature Stop Temperature, it enters heating mode.
- Timing Function: It features cycle time and countdown function and total of 4 modes can be selected P01 Cycle Time Mode, P02 Countdown ON Mode, P03 Countdown OFF Mode, and P04 Countdown ON&OFF Mode. Timing range: 0~99 hours and 59 minutes. Please note that the temperature mode and timing function cannot be used at the same time.
- More Functions: The IP67 waterproof temperature probe can be inserted into the soil or submerged in water, and the backlit LCD screen makes it easy to see the current temperature and set temperatures in the dark. It also supports temperature calibration, factory reset, child lock, and a memory function that can save all set parameters after a power failure.
- Wide Application: This temperature control socket is widely applicable to greenhouses, reptiles, incubators, terrariums, freezers, refrigerators, heaters, home brewing, zoos, fermentation, heating mats, and other temperature control systems, and it can be a timer with cycle timing and countdown.
- See more on Amazon...
Brand: Inkbird | Manufacturer: INKBIRD
See On Amazon #10
Inkbird ITC308S Temperature Controller for Aquarium with Submersible Probe, Heating Cooling Outlets Thermostat for Heater and Cooling Fans
Asin: B07RXYS17V | Model: ITC-308S | PartNumber: ITC-308S
Temperature Calibration; Over-Temperature And Sensor Fault Alarm. Dual Display Window, Be Able To Display Measured Temperature And Set Temperature At The Same Time..
It's An All In One, Simple Solution Providing Control Of Cooling And Heating..
Maximum Output Load: 1200W (110V)..
Fully Submersible Probe. Aquarium Probe Works Better In Water Than Standard Probe..
Features
- Temperature Control Mode: On/Off Control. Cooling and Heating control.
- Fully submersible probe. Aquarium probe works better in water than standard probe.
- Temperature calibration; Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
- Maximum output load: 1200W (110V).
- It's an all in one, simple solution providing control of cooling and heating.
- See more on Amazon...
Brand: Inkbird | Manufacturer: LERWAY Tech.
Dimensions: 6.70 x 1.20 x 2.60 inches
See On Amazon #11
Inkbird ITC-608T Temperature Controller with Dual Temperature Sensor AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed.
Asin: B07MB16C3K | Model: ITC-608T-Dual Temp Sensor | PartNumber: ITC-608T-Dual Temp Sensor | Ean: 0761895322201 | UPC: 761895322201
[Dual Temperature Sensor] Temperature Sensors Are Waterproof And The Temperature Control Range Is -40~212°F (-40~100°C)..
[Multipurpose Usage] Temperature And Humidity Controller Itc-608T Can Be Used In Home Brewing (Refrigerator), Fermenting, Greenhouse, Terrarium, Reptile, Planting (Mushroom), Meat Storage And Cooking. Max Loading: 120V 15A 1800W..
[Multiple Functions Temperature And Humidity Control Mode With Dual Relay Output] Itc-608T Can Work As A Temperature Controller, A Humidity Controller, A Temperature Humidity Controller And Dual Temperature Controller. First, Only Plug Temperature Sensor With Heating And Cooling Equipment. Second, Only Plug Humidity Sensor With Humidifier And Dehumidifier Equipment. Third, Plug Both Temperature And Humidity Sensor With Cooling/Heating And Humidifier/Dehumidifier Equipment. Last, Plug Dual Temper.
[Main Functions] Supporting Calibration, Compressor Delay And Saving Reset Setting Values. Centigrade Or Fahrenheit Degree Display, Easy To Set, Pv And Sv Dual Display Windows. And With Compressor Delay For Protecting Cooling Device. Itc-608T Can Save The Original Setting Values In Case Accidentally Power-Off..
Features
- [US ETL Certificate Listed and Warranty] ITC-608T thermostat temperature controller is ETL listed, and rigorously tested for quality control and safety. More power up to 1800W. The unit itself has 2 years warranty. (The temperature sensors have 1 year warranty.)
- [Main Functions] Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- [Dual Temperature Sensor] Temperature sensors are waterproof and the temperature control range is -40~212 F (-40~100 C).
- [Multiple Functions Temperature and Humidity Control Mode with Dual Relay Output] ITC-608T can work as a temperature controller, a humidity controller, a temperature humidity controller and dual temperature controller. First, only plug temperature sensor with heating and cooling equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment. Last, plug dual temper
- [Multipurpose Usage] Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking. Max Loading: 120V 15A 1800W.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird Tech
Dimensions: 3.34 x 1.37 x 8.10 inches
See On Amazon #12
Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse
Asin: B019I3YCFS | Model: ITC-1000 | PartNumber: ITC-1000 | Ean: 0716045934124, 7131405533688, 0747380952252 | UPC: 716045934124, 747380952252
【Calibration】Temperature Calibrating, Refrigerating Control Output Delay Protection..
【Warranty】12V Temperature Controller With 1 Years Warranty..
【Alarm】When Temperature Exceeds The Limit Or When Sensor Error It Will Alarm. It Can Be Used For Peltier Water Cooling Device, Cooling Fan, Car's 12V Battery, 12 Volt Chest Cooler,Heater Etc..
【Mode】Automatic Switch Between Cooling And Heating Modes, Fahrenheit And Celsius Display Can Be Choose..
Features
- Output 2 Relays, control the temperature by setting the temperature set value and the difference value.
- Mode Automatic switch between cooling and heating modes, Fahrenheit and Celsius display can be choose.
- Calibration Temperature calibrating, refrigerating control output delay protection.
- Alarm When temperature exceeds the limit or when sensor error it will alarm. It can be used for peltier water cooling device, cooling fan, car's 12v battery, 12 volt chest cooler,heater etc.
- Warranty 12V temperature controller with 1 years warranty.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
Dimensions: 1.49 x 3.93 x 3.77 inches | Weight: 0.35 pounds
See On Amazon #13
Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller
Asin: B01N56KEU6
【Dual Relay】Both Controllers Offer Two Power Outlets. Plug-In Heating Equipment, And Ventilation Fan On The Temp Controller, And Plug The Humidifier And Dehumidification Equipment On The Humidity Controller..
【Reliable】Inkbird Is The First One To Offer Pre-Wired Temp/Humidity Controllers..
【Affordable】Diy The Ventilation System For Your Grow Tent Gets More Fun But Costs Less Than Getting A Pre-Set Ventilation System..
【Buzzer Alarm】High And Low Temperature/Humidity Alarms Support Custom Adjust..
Features
- Plug n Play no more complicated wires are needed, and the programable temperature controllers is friendly to growers, staters.
- Buzzer Alarm High and low temperature/humidity alarms support custom adjust.
- Dual relay Both controllers offer two power outlets. Plug-in heating equipment, and ventilation fan on the temp controller, and plug the humidifier and dehumidification equipment on the humidity controller.
- Affordable DIY the ventilation system for your grow tent gets more fun but costs less than getting a pre-set ventilation system.
- Reliable Inkbird is the first one to offer pre-wired temp/humidity controllers.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird Tech
See On Amazon #14
Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing Aquarium Breeding Reptiles Hatching Heat Mat
Asin: B07KC24CKD | Model: ITC-306T-A | PartNumber: ITC-306T-A
[Only Heating] Temperature Control Mode: On/Off Control. Please Note It Is Only Heating Controller Without Cooling Function. Both Of The Plugs Can Control The Heating. But Totally Could Not Over 1200W..
[Different Functions] Temperature Calibration, Over-Temperature And Sensor Fault Alarm. Maximum Output Load: 1200W (110V)..
[Dual Time Cycle Setting] Can Be Set Different Temperature From Day And Night On The Basis Of The Physical Needs Of Animals And Plants During 24 Hours..
[Dual Display Window] Be Able To Display Measured Temperature And Set Temperature At The Same Time..
Features
- [Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- [Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- [Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
See On Amazon #15
Humidity Controller IHC200 Inkbird Humidistat Mushroom Greenhouse Pre Wired Outlet Dual Stage Humidifier Dehumidifier(new version)
Asin: B07XGQ7Q53 | Model: IHC-200-US-2 | PartNumber: IHC-200-US-2
💎Switch The Modes Between Humidification And Dehumidification Automatically;Calibrate The Humidity Value;.
💎Alarm When Humidity Exceeds High/Low Humidity Setting Value;.
💎Alarm When Sensor Error Or Humidity Exceeds Limit;.
💎Control Humidity By Setting Value And Differential Value; Delay Protection For Control Output; Query Current Temperature;.
Features
- Humidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: 3%RH
- Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature;
- Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;
- Alarm when sensor error or humidity exceeds limit;
- Alarm when humidity exceeds high/low humidity setting value;
- See more on Amazon...
Brand: Inkbird | Manufacturer: lerway tech
Dimensions: 2.60 x 1.20 x 6.70 Inches | Weight: 0.99 pounds
See On Amazon #16
Inkbird Digital Wi-Fi Humidity Controller IHC-200 Dual Outlet Pre-Wired Humidistat for Mushroom Growing Curing Meat Reptile Greenhouse Support Humidifier Dehumidifier Fan iOS&Andriod.
Asin: B0892B3VWM | Model: IHC-200-WiFi | PartNumber: IHC-200-WiFi
Plug-N-Play: No Complicated Installation Required. Display The Set Humidity Value And The Measured Humidity Value At The Same Time With 2 Screens. Support Humidity Calibration And Dehumidification Control Delay Protection..
Please Feel Free To Contact Us At Anytime You Want To, We Will Reply In 24 Hours!.
High/Low Humidity Alarm: Set A High/Low Humidity Alarm, The Controller Will Alarm To Remind You If The Humidity Value Exceeds The Setting Value, And It Also Alarm When A Probe Error Occurs. Press Any Button To Turn Off The Alarm Sound Or You Can Turn It Off On Your Phone..
Dual Relay Output: Support Both Humidifying Equipment And Dehumidifying Equipment. Voltage: 100-230Vac 50/60Hz, 10A. Maximum Power: 1200W(120Vac), 2200W(220Vac). Humidity Measurement Range: 10 ~ 99% Rh. Relative Humidity Accuracy: ± 3% Rh ~ ± 5% Rh..
Features
- Remote Control: Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, then you can monitor or adjust the humidity on your phone through the INKBIRD app at any time anywhere.
- Dual Relay Output: Support both humidifying equipment and dehumidifying equipment. Voltage: 100-230Vac 50/60Hz, 10A. Maximum Power: 1200W(120Vac), 2200W(220Vac). Humidity measurement range: 10 ~ 99% RH. Relative humidity accuracy: 3% RH ~ 5% RH.
- Plug-n-Play: No complicated installation required. Display the set humidity value and the measured humidity value at the same time with 2 screens. Support humidity calibration and dehumidification control delay protection.
- High/Low Humidity Alarm: Set a High/Low Humidity Alarm, the controller will alarm to remind you if the humidity value exceeds the setting value, and it also alarm when a probe error occurs. Press any button to turn off the alarm sound or you can turn it off on your phone.
- Please feel free to contact us at anytime you want to, we will reply in 24 hours!
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
Dimensions: 2.60 x 1.20 x 6.70 inches | Weight: 0.99 Pounds
See On Amazon #17
Inkbird Temp Control Thermostat ITC1000 Dual Stage Digital Temperature Switch Controller Display Heating Cooling Relay NTC Sensor 3D Printer Freezer Fridge Hatching 110 Volt
Asin: B0152LYY0I | Model: ITC1000 | PartNumber: ITC1000 | Ean: 0705701562658 | UPC: 705701562658
Has An Alarm To Indicate Sensor Failure Or High Temperature.
Be More User Friendly Than The Stc-1000.
Highly Accurate And Reliable Temperature Controller.
Can Control Both Heating And Cooling Output.
Features
- It does indeed read in deg F.
- Can control both heating and cooling output
- Has an alarm to indicate sensor failure or high temperature
- Highly accurate and reliable temperature controller
- Be more user friendly than the STC-1000
- See more on Amazon...
Brand: Inkbird | Manufacturer: LERWAY Tech.
Dimensions: 9.00 x 3.00 x 9.00 inches
See On Amazon #18
Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing Breeding Reptiles Hatching Heat Mat ITC-306T 10A 100V.
Asin: B01DZ5NVBQ | Model: ITC-306T-1 | PartNumber: ITC-306T-1 | Ean: 0705701584995 | UPC: 705701584995
🌟🌟[Only Heating] Temperature Control Mode: On/Off Control. Please Note It Is Only Heating Controller Without Cooling Function. Both Of The Plugs Can Control The Heating. But Totally Could Not Over 1200W..
🌟🌟[Different Functions] Temperature Calibration, Over-Temperature And Sensor Fault Alarm. Maximum Output Load: 1200W (110V)..
🌟🌟[Dual Time Cycle Setting] Can Be Set Different Temperature From Day And Night On The Basis Of The Physical Needs Of Animals And Plants During 24 Hours..
🌟🌟[Dual Display Window] Be Able To Display Measured Temperature And Set Temperature At The Same Time..
Features
- [Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- [Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- [Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
See On Amazon #19
Heating Thermostat Aquarium Reptile Submersible Probe Sensor Inkbird ITC306T Heater Relay Digital Greenhouse Temperature Controller Dual Stage Timer Time Switch ONLY Heat Plug Outlet NO Cooling
Asin: B07DN9K7PH | Model: ITC-306T-LW | PartNumber: ITC-306T-LW | Ean: 0761895321341, 0705701523383 | UPC: 761895321341, 705701523383
This Plug And Play Product Is Designed With Dual Lcd Display, And Offers The Optional Display Of Centigrade Or Fahrenheit, Which Makes It More Humanized Temperature Control..
℃ / ℉ Display Can Be Chosen. Temperature Calibration; Over-Temperature And Sensor Fault Alarm. Dual Display Window, Be Able To Display Measured Temperature And Set Temperature At The Same Time..
The Temperature Can Be Controlled More Accurately With Its Function Of Temperature Calibration And Temperature Hysteresis..
It Can Be Set To Two Different Temperatures With Its Function Of Dual Time Cycle Setting During 24 Hours According To The Day And Night, Which Can More Suitable For The Needs Of Aquarium..
Features
- ONLY heating outlet aquarium sensor heater for aquarium, reptile.
- It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the needs of aquarium.
- This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control.
- The temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
- / Display can be chosen. Temperature calibration; Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Lerway Tech
Dimensions: 10.00 x 11.00 x 19.00 Centimeters
See On Amazon
Looking For Something Else?
Search