Brocraft Fishing Kayak Trolling Motor Mount Universal / Kayak Outboard Motor Bracket
Asin: B01GFLQW9K | Ean: 0602716056830 | UPC: 602716056830
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Quick & Easy Installation.
Adjustable For Left Or Right Hand Operation.
Adjustable For Different Hull Widths, Fit Any Angle Or Inclination Flush Rod Holder.
Universal-Suits Most Kayaks With Dual Rod Holders.
Features
- Marine grade alloy and nylon
- Universal-suits most Kayaks with dual rod holders
- Quick & easy installation
- Adjustable for different hull widths, Fit any angle or inclination flush rod holder
- Adjustable for left or right hand operation
- See more on Amazon...
Brand: Brocraft | Manufacturer: Brocraft
See On Amazon Similar To Brocraft Fishing Kayak Trolling Motor
#1
VEVOR Electric Trolling Motor 55lb Thrust Transom Mounted 24-Volt Boat Motor Variable Speed 10 LED Indicator for Kayak, Small Fishing Boats (30" Shaft)
Asin: B0C1YQVRNW | Model: Electric Trolling Motor 55lb Thrust | PartNumber: Electric Trolling Motor 55lb Thrust | Ean: 0197988463641, 0840349935195 | UPC: 840349935195, 197988463641
【Upgraded Design】Vevor Boat Motor Features A 30-Inch Stainless Steel Shaft, Copper Motor And Three-Bladed Propeller, Which Can Enhance Efficiency And Service Life, Whatever Sailing On Saltwater Or Freshwater. Three Sharp Blades Give The Motor Great Low-End Torque To Get The Boat Moving. Suitable For Small Fishing Boats, Kayaks, Inflatable Boats, Canoes..
【10 Led Battery Indicator】Make It Easy To Check Your Battery Status. When The Battery Level Drops Below 20%, An Audible Notification Alerts You To Charge The Battery. With This Feature, You Can Quickly Get Back To Fishing In No Time! (Note: Battery Not Included).
【Warm Note】This Trolling Motor Requires One (1) 24V Or Two (2) 12V Connected In Series Lead-Acid Deep Cycle Or Lithium Deep Cycle Battery For Operation. ≥60A Recommended. Battery Not Included, Need Be Purchased Separately..
【Adjustable Depth & Angle】You Can Easily Adjust The Shaft Angle By Press The Button To Fit Different Sailing Conditions According To Your Fishing Demands. Also, You Can Adjust The Depth Of The Motor In The Water With A Knob For Better Fishing..
【Variable Speed & Adjustable Handle】More Precise Control Of The Boat's Moving Speed At Your Will Up To 1700Rpm. The Up And Down 12.4" Adjustable Handle Help Navigate Through Water And Weeds. The Handle Angle, As Well As Mount, Height, Angle, And Direction Can All Be Adjusted And Locked Into Place When Needed..
Features
- Powerful Motor This 55lb thrust 24V electric trolling motor provides excellent power and efficiency for small to medium boats. High quality components allow the motor to run all day long without overheating or disturb your fishing experience.
- Variable Speed & Adjustable Handle More precise control of the boat's moving speed at your will up to 1700RPM. The up and down 12.4 adjustable handle help navigate through water and weeds. The handle angle, as well as mount, height, angle, and direction can all be adjusted and locked into place when needed.
- Upgraded Design VEVOR boat motor features a 30-inch stainless steel shaft, copper motor and three-bladed propeller, which can enhance efficiency and service life, whatever sailing on saltwater or freshwater. Three sharp blades give the motor great low-end torque to get the boat moving. Suitable for small fishing boats, kayaks, inflatable boats, canoes.
- Adjustable Depth & Angle You can easily adjust the shaft angle by press the button to fit different sailing conditions according to your fishing demands. Also, you can adjust the depth of the motor in the water with a knob for better fishing.
- 10 LED Battery Indicator Make it easy to check your battery status. When the battery level drops below 20%, an audible notification alerts you to charge the battery. With this feature, you can quickly get back to fishing in no time! (Note: Battery not included)
- Warm Note This trolling motor requires one (1) 24V or two (2) 12V connected in series Lead-Acid Deep Cycle or Lithium Deep Cycle battery for operation. 60A recommended. Battery not included, need be purchased separately.
- See more on Amazon...
Brand: 12 | Manufacturer: VEVOR
Dimensions: 43.70 x 21.60 x 9.80 Inches | Weight: 30.00 Pounds
See On Amazon #2
MotorGuide 940200060 X3 Freshwater Bow Mount Trolling Motor Cable Steer, Foot-Control 45-Inch Shaft, 45-Pound Peak Thrust
Asin: B00FPQPGAI | Model: 940200060 | PartNumber: 940200060 | Ean: 0520893355921, 0400265013041, 0089287106834 | UPC: 400265013041, 520893355921, 089287106834
5 Speed With Pull/Pull Smooth Responsive Steering Control.
Mounting Bracket Built With Aircraft-Grade Extruded Aluminum.
Corrosion Resistant Shaft.
45" Composite Shaft.
Features
- 45 pounds peak thrust rating with 12-volt power
- 45 composite shaft
- 5 speed with pull/pull smooth responsive steering control
- Corrosion Resistant Shaft
- Mounting bracket built with aircraft-grade extruded aluminum
- See more on Amazon...
First Available: 09/13/2018
Brand: MotorGuide | Manufacturer: MotorGuide
Dimensions: 8.00 x 57.00 x 22.00 inches | Weight: 46.00 pounds
See On Amazon #3
Scotty #140 Kayak/SUP Transducer Mounting Arm, Slip Disks Included, Fits All Scotty Post Mounts,Black
Asin: B0174X6UNQ | Model: 0140 | PartNumber: 0140 | Ean: 0755034173700, 4121344621761, 0062017001401 | UPC: 755034173700, 062017001401
Swivels 360 Degrees.
The Package Weight Of The Product Is 3 Pounds.
Includes 415 Slip Disc That Offers Micro Adjustments When Needed.
Features
- Designed for kayak and SUP anglers needing an easy way to install transducers for Transport
- Includes 415 slip disc that offers micro adjustments when needed
- Swivels 360 degrees
- The Package Weight Of The Product Is 3 Pounds
- See more on Amazon...
Brand: Scotty | Manufacturer: SCOTTY, INC.
Dimensions: 3.00 x 13.00 x 4.00 inches | Weight: 0.89 pounds
Warranty: LIMITED WARRANTY
See On Amazon #4
Bullnose Rudder clamp on boat rudder fits a 1.125" transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured
Asin: B01FRLDP26 | Model: 868527000206A | PartNumber: 868527000206A | Ean: 0868527000206, 0744288437614 | UPC: 744288437614, 868527000206
Essential - In Most Cases It Helps Hold A True Course At Both A Slow And High Trolling Speeds. Customers Have Also Said, “It Prevents The Boat From Spinning As Much When The Motor Is Off”. Most Tiny Boats Will Benefit From Having Some Kind Of A Rudder Set Up In The Back Vs Not Having A Rudder At All. Only Takes A Few Minutes To Install And You Are Ready To Go..
Bow Mount - Fits The Minn Kota, Edge, Maxxum, And Fortrex. The Bow Mount Motor Must Be A Hand Cable Pull, Not Self Deploy. Self Deploy Will Not Work Because The System Requires The Shaft To Slide Up And Down Right Where The Rudder Needs To Be Attached. However, A Hand Cable Pull Will Allow You To Carefully Bring The Motor Up Out Of The Water On The Motor Mount. Your Bow Mount Setup Needs To Have 1' Of Shaft Sticking Out From The End Of The Platform Allowing Enough Space To Attach The Rudder..
Quality - Manufactured In The Usa With High Quality Parts & Material To Help Ensure You Have A Stress-Free Fishing Experience. It Is Manufactured From Impact Plastic For Durability And Comes With Stainless Steel Screws. It Is Built Strong So You Don't Have To Worry About It Coming Loose, Allowing You To Focus More On Fishing. Patent No. D712,341S.
Fit - The Bullnose Rudder Is A Boat Rudder That Fits 1 1/8" (1.125") Transom Mount Trolling Motors. Please Note, It Will Not Work On A Self Deploy Bow Mount Trolling Motor. It Measures 10.5" High X 4.75" Wide And Fits A 1 1/8" Shaft Diameter. It's Most Commonly Used For "But Not Limited To" Minn Kota Trolling Motor, Motorguide Trolling Motors, Newport Vessel Trolling Motor, Etc. Common Tiny Boats Used Are, Inflatable Pontoon, Pelican Bass Raider 10E, Fishing Kayak, Canoes, Jon Boats, And More..
Features
- PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S
- FIT - The Bullnose Rudder is a boat rudder that fits 1 1/8 (1.125) transom mount trolling motors. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5 high x 4.75 wide and fits a 1 1/8 shaft diameter. It's most commonly used for but not limited to minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more.
- ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, it prevents the boat from spinning as much when the motor is off . Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install and you are ready to go.
- QUALITY - Manufactured in the USA with high quality parts & material to help ensure you have a stress-free fishing experience. It is manufactured from impact plastic for durability and comes with stainless steel screws. It is built strong so you don't have to worry about it coming loose, allowing you to focus more on fishing. Patent no. D712,341S
- BOW MOUNT - Fits the Minn Kota, EDGE, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Self deploy will not work because the system requires the shaft to slide up and down right where the rudder needs to be attached. However, a hand cable pull will allow you to carefully bring the motor up out of the water on the motor mount. Your bow mount setup needs to have 1' of shaft sticking out from the end of the platform allowing enough space to attach the rudder.
- See more on Amazon...
Brand: Bullnose Products | Manufacturer: Bullnose Products LLC
Dimensions: 1.50 x 10.50 x 6.75 inches | Weight: 0.54 pounds
See On Amazon #5
Trolling Motor Accessories, Haoguo Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat
Asin: B09NPT65T7 | Model: 1 | PartNumber: 1 | Ean: 0779288407145 | UPC: 779288407145
Universal Mount - Compatible With Most Electric Trolling Motors (24 To 55 Thrust). Ideal For Use As A Canoe Rudder, Or A Inflatable Pontoon Rudder, Kayak Rudder, Or Pelican Bass Raider 10E Rudder.
Bow Mount - Compatible With Edge, Minn Kota, And Fortrex, Etc. The Bow Mounting Motor Must Be Manually Drawn Rather Than Self-Deployed.
Easy Installation - Complimentary Socket Wrench For Easy Installation, Very Easy. You May Even Mount It With The Short End Down (Upside Down) For Shorter Motors.
More Control - Easy Turns When Steering, Provides Better Control In Wind Or Other Most Weather Environments, Reduces The Need For Oars, It Really Helps To Keep Your Boat Heading In The Wind And Reduces Your Boat Rotation As Much As Possible When The Motor Is Turned Off.
Features
- STURDY & DURABLE - The rudder is made of stainless steel material, and also equipped with stainless steel screws and jam nut to improve stability, rust and corrosion resistance. It is sturdy and durable to extend the service life and allowing you to focus more on fishing
- MORE CONTROL - Easy turns when steering, provides better control in wind or other most weather environments, reduces the need for oars, it really helps to keep your boat heading in the wind and reduces your boat rotation as much as possible when the motor is turned off
- UNIVERSAL MOUNT - Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder
- EASY INSTALLATION - Complimentary socket wrench for easy installation, very easy. You may even mount it with the short end down (upside down) for shorter motors
- BOW MOUNT - Compatible with EDGE, Minn Kota, and FORTREX, etc. The bow mounting motor must be manually drawn rather than self-deployed
- See more on Amazon...
Brand: Haoguo | Manufacturer: Haoguo
Dimensions: 1.00 x 2.00 x 1.00 inches
See On Amazon #6
Watersnake T18 ASP - 18 Pound Thrust 12v Electric Saltwater Trolling Motor with Transom Mount
Asin: B003O1T7TM | Model: 55043 | PartNumber: 55043 | Ean: 9312327788563
Design – 24” Shaft, Adjustable Mount Fitting That Makes For Easy Attachment, And Anti-Impact Clip System. This Easy To Steer Motor Uses A Hand Tiller With An Extendable Handle, High And Low Speed Control, Forward And Reverse Switch And Two Blade Weedless Propeller Design..
Satisfaction Guarantee: Necessity Is The Mother Of Invention. Created By Anglers To Be Used By Anglers. If You’Re Not Satisfied With Your Watersnake Electric Motor, Contact Your Distributor To Be Taken Care Of..
Style - Electric Motor With 18Lbs Thrust, Transom Mount Included..
Compatible - It Is The Ideal Trolling Motor To Use On Kayaks, Canoes, Small Dinghies, And Inflatable Boats. Please Note: Battery Not Included..
Features
- PORTABLE - Watersnake Saltwater Electric Outboard Motor is the ultimate in lightweight portability, weighing only 4.85lbs (2.2kg). Watersnake s simple design keeps the weight down while delivering quality and performance.
- COMPATIBLE - It is the ideal trolling motor to use on kayaks, canoes, small dinghies, and inflatable boats. Please note: Battery not included.
- DESIGN 24 shaft, adjustable mount fitting that makes for easy attachment, and anti-impact clip system. This easy to steer motor uses a hand tiller with an extendable handle, high and low speed control, forward and reverse switch and two blade weedless propeller design.
- STYLE - Electric motor with 18lbs thrust, Transom Mount included.
- SATISFACTION GUARANTEE: Necessity is the mother of invention. Created by anglers to be used by anglers. If you re not satisfied with your Watersnake Electric Motor, contact your distributor to be taken care of.
- See more on Amazon...
First Available: 08/10/2010
Brand: Watersnake | Manufacturer: Watersnake
Weight: 11.02 Pounds
See On Amazon #7
Brocraft Trolling Motor Stabilizer Mount With Deck Mount/Trolling Motor Stabilizer Mount
Asin: B0BZTMH9LY | Model: Trolling Motor Support | PartNumber: Trolling Motor Support
The Trolling Motor Stabilizer Works With Multiple Brands And Models Of Tiller Controlled Electric Trolling Motors.
Height Adjustable To Suit Different Shaft Heights Depending On Your Motor Mounting Position.
Trolling Motor Mount Support Stabilizer Rotates 360 Degrees And Can Be Adjusted To Accommodate Multiple Angles When In Use..
Features
- Made of high-strength composite for durability and reliability in the most demanding environments
- Trolling Motor Mount Support Stabilizer rotates 360 degrees and can be adjusted to accommodate multiple angles when in use.
- The trolling motor stabilizer works with multiple brands and models of tiller controlled electric trolling motors
- Height adjustable to suit different shaft heights depending on your motor mounting position
- See more on Amazon...
Brand: Brocraft | Manufacturer: Brocraft
Warranty: one year
See On Amazon #8
BKC Brooklyn Kayak Company UH-TM315 Kayak Trolling Motor Mount, Trolling Motor Mount for Quick and Easy Kayak Trolling Motor Setup
Asin: B08D3WLRDF | Model: UH-TM315 | PartNumber: UH-TM315 | Ean: 4635871978330
Durable Materials - Rust-Resistant Metal And Fade- And Corrosion-Resistant Plastics Will Stand The Test Of Time And Exposure To The Element.
Must Have For Fishing - Helps Upgrade A Paddle Only Kayak Into The Ultimate Trolling Fishing Vessel Without Any Permanent Hull Alterations Required.
Lightweight Construction - Hollow But Sturdy Tubing Reduces Motor Mount Weight, Allowing For Easy Handling Of Mount And Adding Minimal Weight To Kayak.
Ambidextrous Design - Mount Allows For Installation Of Trolling Motor For Easy Use By Both Left And Right Handed Boaters.
Features
- Easy Setup and Removal - Motor mount connects to most kayak hulls in a matter of minutes and can be removed in a matter of seconds
- Ambidextrous Design - Mount allows for installation of trolling motor for easy use by both left and right handed boaters
- Durable Materials - Rust-resistant metal and fade- and corrosion-resistant plastics will stand the test of time and exposure to the element
- Lightweight Construction - Hollow but sturdy tubing reduces motor mount weight, allowing for easy handling of mount and adding minimal weight to kayak
- Must Have for Fishing - Helps upgrade a paddle only kayak into the ultimate trolling fishing vessel without any permanent hull alterations required
- See more on Amazon...
Brand: BKC | Manufacturer: BKC
Dimensions: 20.00 x 3.00 x 3.00 Inches
Warranty: 1 YEAR WARRANTY
See On Amazon #9
Brocraft Deck Mount Trolling Motor Bracket/Outboard Motor Mount
Asin: B01HJM9052 | Ean: 0742790780921 | UPC: 742790780921
Designed For Motor To Be Removed When Boat Is Under Engine Power Or Being Trailered..
Maximum Trolling Motor Thrust Of 36 Pounds,Come With A Two Years Limited Warranty.
For Electric Trolling Motors Only. Not For Outboard Engines Of Any Size..
Constructed Of Marine Aluminum With Black Nylon Plastic.
Features
- Universal trolling motor bracket for clamp-on type electric trolling motors.
- Constructed of marine aluminum with black Nylon plastic
- Designed for motor to be removed when boat is under engine power or being trailered.
- For electric trolling motors only. Not for outboard engines of any size.
- Maximum trolling motor thrust of 36 pounds,Come with a two years limited warranty
- See more on Amazon...
Brand: Brocraft | Manufacturer: Brocraft
Weight: 3.00 Pounds
See On Amazon #10
Annurssy Electric Outboard Motor Accessories Two-bladed Propeller 32LBS, 36LBS, 40LBS, 46LBS Trolling Motor
Asin: B085C99J7X | Ean: 0717066759239 | UPC: 717066759239
It Comes With A Prop, Prop Pin, Prop Nut And A Simple Wrench..
3 Inches Hub Fits Two-Bladed Machete Ii Propeller Of A Towing Motor..
Extremely Durable With High Strength Nylon. Resistant To Corrosion And Rust..
Recommended For 32Lbs, 36Lbs, 40Lbs, 46Lbs Electric Outboard Motors..
Features
- This propeller is universal, and it is suitable for several common brands.
- Recommended for 32LBS, 36LBS, 40LBS, 46LBS electric outboard motors.
- It comes with a prop, prop pin, prop nut and a simple wrench.
- Extremely durable with high strength nylon. Resistant to corrosion and rust.
- 3 inches hub fits Two-Bladed Machete II propeller of a towing motor.
- See more on Amazon...
Brand: Annurssy | Manufacturer: Annurssy
See On Amazon #11
MotorGuide XI3-55lb Thrust 36" Shaft 12-Volt Kayak Trolling Motor with Wireless FOB Control (Non GPS)
Asin: B09F265PPL | Model: 940700270 | PartNumber: 940700270 | Ean: 0089287301086 | UPC: 089287301086
Easy Stow And Deploying: A Large Securestep Lever Allows Fishermen To Quickly And Easily Stow And Deploy, Saving You Time And Energy As You Bounce From Spot To Spot.
Led Dashboard: Easily Monitor Functions – Even In Bright Conditions – With Four Led Notifications Showing Power, Propeller Activity, Pinpoint Gps Status And Battery Life.
Wireless Control: Control In The Palm Of Your Hand. Intuitive Remote-Control Steering Is Ready For Use Right Out Of The Box. Also Compatible With Optional Wireless Foot Pedal.
Features
- Peak thrust: 55 lb; Shaft length: 36"; Max amp draw: 52A; Voltage: 12V DC; Speed control/Motor directions: Digital variable forward; Steering: Wireless Remote; Propeller: 3bl Machete; Pinpoint GPS: No; Pinpoint GPS Gateway: Compatible
- Wireless Control: control in the palm of your hand. Intuitive remote-control steering is ready for use right out of the box. Also compatible with optional wireless foot pedal
- Easy Stow and Deploying: a large SecureStep lever allows fishermen to quickly and easily stow and deploy, saving you time and energy as you bounce from spot to spot
- LED Dashboard: easily monitor functions even in bright conditions with four LED notifications showing Power, Propeller Activity, Pinpoint GPS status and Battery Life
- See more on Amazon...
Brand: MotorGuide | Manufacturer: MotorGuide
See On Amazon #12
RAILBLAZA Kayak Motor Mount
Asin: B01N0ROZGX | Model: 04-4091-11 | PartNumber: 04-4091-11 | Ean: 0814162020420 | UPC: 814162020420
Quick Transition From Paddle Only To Motor Ready.
Some Assembly Required.
Able To Add Railmount 32-41S For Added Customization.
Includes All Necessary Hardware.
Features
- Simplest way to attach a trolling motor to your kayak
- Includes all necessary hardware
- Quick transition from paddle only to motor ready
- Able to add RailMount 32-41s for added customization
- Some Assembly Required
- See more on Amazon...
Brand: RAILBLAZA | Manufacturer: RAILBLAZA
Weight: 0.00 pounds
Warranty: 5 year warranty
See On Amazon #13
Brocraft Power Lock Fully Adjustable Rod Holder with Aluminum Large Opening Clamp / Jon Boat Rod Holder / Clamp On Rod Holder
Asin: B06XWB77DK | Model: BC-RH3021P1 | PartNumber: BC-RH3021P1
Marine Aluminum Universal C- Clamp. Clamp Opens To A Maximum Of 2-5/8".
Great For Powerboats, Canoes, Pontoon And Kayak.
Fiber-Glass Injected Nylon Construction ,360 Dergee Adjustable Rotation , Alock Rod Secure Rig.
Features
- Adjustable to multiple vertical or horizontal positions
- Fiber-glass Injected Nylon construction ,360 dergee adjustable rotation , ALOCK rod secure Rig
- Marine aluminum Universal C- Clamp. Clamp opens to a maximum of 2-5/8
- Great for powerboats, canoes, pontoon and kayak
- See more on Amazon...
Brand: Brocraft | Manufacturer: Brocraft
Weight: 1.39 pounds
See On Amazon #14
Pelican Transom Kayak Motor Mount - Kayak Trolling Motor Mount for Quick and Easy Kayak Trolling Motor Setup - The Catch Pelican Kayak Serie- Black
Asin: B09R67LQPD | Model: ps1900-00 | PartNumber: ps1900-00 | Ean: 0776324564114 | UPC: 776324564114
Compatibility: The Pelican Transom Is Designed To Be Installed On The Following Kayaks: Catch Pwr 100 (Mf10), Catch Mode 110 (Mi11), And Getaway 110 (Mh10)..
Solid: Made Of Polypropylene Reinforced With Fiberglass..
Features
- Included Hardware: Five bolts, five nuts, and ten washers.
- Solid: Made of polypropylene reinforced with fiberglass.
- Compatibility: The Pelican Transom is designed to be installed on the following kayaks: CATCH PWR 100 (MF10), CATCH MODE 110 (MI11), and GETAWAY 110 (MH10).
- See more on Amazon...
First Available: 03/21/2022
Brand: Pelican | Manufacturer: Pelican
Dimensions: 5.10 x 11.00 x 8.13 inches | Weight: 1.50 pounds
Warranty: 1-year limited warranty against defects in materials and workmanship on product component parts and accessories from the date of purchase. A proof of purchase will be required.
See On Amazon #15
Top Quality Canoe Trolling Motor Mounting Bracket with Natural Ash Finish
Asin: B07FVMJQH8
28 Inches Long Provides For A Full Range Of Propeller Motion.
Check Out My Other Style Mounts!.
No Tools Required. Star Bolt Knobs Allow One Hand Tightening.
Solid Ash In A Natural Wood Finish.
Features
- Rugged Heavy Duty Construction for Demanding Environments
- Solid Ash in a Natural Wood Finish
- 28 inches long provides for a full range of propeller motion
- No tools required. Star bolt knobs allow one hand tightening
- Check out my other style mounts!
- See more on Amazon...
Brand: Top Quality | Manufacturer: AquaOutdoors
See On Amazon #16
FOMIUZY Panoptix Livescope LVS32 Perspective Trolling Motor Transducer Mode Live Scope Mount Accessories Replaces 010-12970-00 0101297000
Asin: B0C1VHRKFG | Ean: 0752140410637 | UPC: 752140410637
【Fits For】: Gpsmap 8400/8600 Series Mfds, Gpsmap 7400/7600, 10X2/12X2, Gpsmap 12X2/12X2xsv Touch, 7X2/9X2 Series Chartplotters And X2 Plus Series And Echomap Plus 7Xcv/7Xsv And Echomap Uhd And 9Xsv Chartplotter/Sonar Combo Series.
【Buy With Confidence】: Once There Is A Problem With The Product, Contact Us Here To Solve It Perfectly For You, Without Worrying About Quality Problems.
【Oe#】: 010-12970-00 0101297000.
【High Quality】: Made Of Reinforced High Quality Material, It Is Wear-Resistant, Corrosion-Resistant, Sturdy And Has A Long Service Life. Able To Keep The Sonar View Stable And Can Look Down On The Whole Area Instead Of Constantly Shaking The Sensor To Keep Your Target Area In View. Supports 3 Views Mounted At Once, Able To Switch Quickly And Accurately, Which Can Help You Identify Fish That Are Mixed Up On The Bottom. Bring Gains To Your Scouting And Fishing..
Features
- Direct Replacement : If you use the LiveScope to find cover, or to spot suspended fish in deep water, you will need the see-through mode, which will cause you to need to switch between different directions frequently, which will be very annoying, and it is recommended that you purchase the kit to solve the problem. this mount meets or exceeds the oem standard, and has been tested in the factory, perfectly matches the original LVS32 transducer, and can be installed directly
- High quality : Made of reinforced high quality material, it is wear-resistant, corrosion-resistant, sturdy and has a long service life. Able to keep the sonar view stable and can look down on the whole area instead of constantly shaking the sensor to keep your target area in view. Supports 3 views mounted at once, able to switch quickly and accurately, which can help you identify fish that are mixed up on the bottom. Bring gains to your scouting and fishing.
- Fits For : GPSMAP 8400/8600 series MFDs, GPSMAP 7400/7600, 10x2/12x2, GPSMAP 12x2/12x2xsv Touch, 7x2/9x2 series chartplotters and X2 Plus series and ECHOMAP Plus 7xCV/7xSV and ECHOMAP UHD and 9xSV chartplotter/sonar combo series
- OE# : 010-12970-00 0101297000
- Buy With Confidence : Once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems
- See more on Amazon...
Brand: FOMIUZY | Manufacturer: FOMIUZY
See On Amazon #17
Brocraft Universal Transom Trolling Motor Mount for Kayaks/Kayak Trolling Motor Mount/trolling motor mount (Generation 2)
Asin: B09R6BQQVC
For Electric Trolling Motors Only. Not For Outboard Engines Of Any Size..
Universal Fit For Any Boat With A Flat Spot On The Stern Big Enough For A Power Pole..
Constructed Of Marine Aluminum With Black Nylon Plastic.
Features
- Universal trolling motor bracket for clamp-on electric trolling motors
- Constructed of marine aluminum with black Nylon plastic
- For electric trolling motors only. Not for outboard engines of any size.
- Universal fit for any boat with a flat spot on the stern big enough for a power pole.
- See more on Amazon...
Brand: Brocraft | Manufacturer: Brocraft
See On Amazon #18
Watersnake Tracer Transom Mount Trolling Freshwater Motor (30-Pound Thrust, 30-Inch Shaft, 12-Volt)
Asin: B00AU5Y43E | Model: TWTCS30TH-30 | PartNumber: TWTCS30TH-30 | Ean: 9312327809305, 0757183063536 | UPC: 757183063536
Compatibility: Suits Various Styles Of Small Watercraft Including Kayaks, Canoes, Inflatables, Jon Boats, And More..
Satisfaction Guarantee: Necessity Is The Mother Of Invention. Created By Anglers To Be Used By Anglers. If You’Re Not Satisfied With Your Watersnake Electric Motor, Contact Your Distributor To Be Taken Care Of..
Features: 30-Inch Telescopic Chrome Plated Steel Shaft, 30Lbs Thrust, Extendable Tiller Operating.
Weedless Design: Weedless Two-Blade Propeller Designed To Allow Your Boat To Move Easily Through The Water And Weeds..
Features
- VARIETY OF SPEED: Includes five forward speeds and two reverse speeds
- WEEDLESS DESIGN: Weedless two-blade propeller designed to allow your boat to move easily through the water and weeds.
- COMPATIBILITY: Suits various styles of small watercraft including kayaks, canoes, inflatables, Jon boats, and more.
- FEATURES: 30-inch telescopic chrome plated steel shaft, 30lbs thrust, extendable tiller operating
- SATISFACTION GUARANTEE: Necessity is the mother of invention. Created by anglers to be used by anglers. If you re not satisfied with your Watersnake Electric Motor, contact your distributor to be taken care of.
- See more on Amazon...
Brand: Watersnake | Manufacturer: Watersnake
See On Amazon #19
Brocraft Kayak Motor Steering Arm/Kayak Trolling Motors Steering Triangle/Kayak Trolling Motor Steering Control Arm/Trolling Motor Steering kit
Asin: B0BHMQS44H
Designed For Shaft Diameter 7/8" To 1-1/2".
The Control Arm Mount Can Be Quickly Installed Using The Hardware Provided. It Is Easily Removed As Well..
Design 4 Possible Adjustment Holes For Fine Turning Your Steering Cable.
Features
- Made by marine grade T6 aluminum with CNC processing
- Design 4 possible adjustment holes for fine turning your steering cable
- Designed for Shaft Diameter 7/8 to 1-1/2
- The Control Arm mount can be quickly installed using the hardware provided. It is easily removed as well.
- See more on Amazon...
Brand: Brocraft | Manufacturer: Brocraft
See On Amazon #20
Brocraft Kayak Track Trolling Motor Mount/Kayak Motor mount
Asin: B06X9TFTF8
Standard Motor Mount Allows You To Affix Gas Or Electric Motor To Any Kayak.
Includes Two Years Warranty.
Marine Grade Aluminum Track Bar Mount.
Features
- Work for Kayak Track ,Adjustable for different hull widths
- Marine grade aluminum track bar mount
- Standard Motor Mount allows you to affix gas or electric motor to any kayak
- Includes two years warranty
- See more on Amazon...
Brand: Brocraft | Manufacturer: Brocraft
See On Amazon
Looking For Something Else?
Search