RGBZONE 2 Pack Mini RF LED Dimmer, 11-Key Single Color LED Controller for 5050 3528 5630 LED Strip Lights, DC5V/DC12V/DC24V LED Dimmer Controller Brightness & Effect Mode RF Wireless Remote LED Dimmer
Asin: B01HM8AJMQ | Model: MT-RF11KMINI | PartNumber: MT-RF11KMINI
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.➤Applicable Site: Tv Table, Counter, Night Table, Bathroom Etc.Applicable Light Led Counter Lights, Strip Light,Cabinet Light,Puck Lights Etc..
➤Dynamic Ode : 8 Built-In Types (Gradual Change , Signal Light , Strobe , Breathe , Candlelight Etc. ).
➤1 To 1 Remote Paired: While Pressing The Two Buttons Speed- And Speed+ At The Same Time Until The Light Bar Flashes. Then The Product Can Be Used Normally..
➤ Controllable Distance: In The Open Area Within 15-20 Meters, The Controller Can Not Be Seen And Does Not Need To Be Aligned With The Controller..
Features
- Input voltage: DC5V/DC12V/DC24V; Output current: <2A/CH max: 6A.(For DC12V LED strip, please use D12V power supply.) Two types of brightness adjustment: one is to quickly select brightness (25%, 50%, 100%), the other is to adjust to your preferred brightness according to ""brightness+ and brightness-"", providing the best dimming for different romantic atmosphere.
- Controllable distance: In the open area within 15-20 meters, the controller can not be seen and does not need to be aligned with the controller.
- Applicable site: TV table, counter, night table, bathroom etc.Applicable light led counter lights, strip light,cabinet light,puck lights etc.
- 1 to 1 remote paired: While pressing the two buttons SPEED- and SPEED+ at the same time until the light bar flashes. Then the product can be used normally.
- Dynamic ode : 8 built-in types (Gradual change , Signal light , Strobe , Breathe , Candlelight etc. )
- See more on Amazon...
Brand: RGBZONE | Manufacturer: RGBZONE
See On Amazon Similar To RGBZONE 2 Pack Mini RF
#1
HiLetgo 3pcs HC-SR501 PIR Infrared Sensor Human Body Infrared Motion Module for Arduino Raspberry Pi
Asin: B07KZW86YR | Model: 3-01-0120 | PartNumber: 3-01-0120
Delay Time: 5-200S(Adjustable) The Range Is (0.Xx Second To Tens Of Second).
Angle Sensor: <100 ° Cone Angle Lens Size Sensor:Diameter:23Mm(Default).
Board Dimensions: 32Mm*24Mm.
Quiescent Current: <50Ua Trigger: L Can Not Be Repeated Trigger/H Can Be Repeated Trigger(Default Repeated Trigger).
Features
- Operating voltage range: DC 4.5-20V
- Quiescent Current: <50uA Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
- Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)
- Board Dimensions: 32mm*24mm
- Angle Sensor: <100 cone angle Lens size sensor:Diameter:23mm(Default)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.05 pounds
See On Amazon #2
RGBZONE DC5V/12V/24V RF Wireless Remote LED Controller, Addressable Mini LED Controller for WS2812B WS2812 WS2811 Dream Color LED Pixel Strip Panel Lights (21 Key)
Asin: B075SXMD9Z | Model: FB5012 | PartNumber: FB5012
▶32-98Ft(10-30M) Long Distance Wireless Rf Remote Control. Mini Size, Convenient To Use. Dc 5V~24V Input. But It Can’T Regulate The Output Voltage.Please Choose Power Supply According To Your Led Lights, Not The Controller. For Example, Dc5v Ws2812b Led Strip ,Must Use Dc5v Power Supply.【***Input Voltage=Output Voltage.】.
▶Support Setting Controlled Pixels Number. Maximum Number Of Control Pixels : Total 2048Pixels(Controller Factory Default 300 Pixel Points). Recommand Use 300 Pixel(Approx. 5 Meters Of Light Strip Length.) The Product Itself Can Carry Power 5V<30W, 12V<72W, 24V<144W, Such As More Than This Power, Please Give The Light Strips With A Separate Power Supply, Or With The Use Of Amplifiers, Otherwise It Will Lead To Controller Overload Damage..
▶The Controller Contains Coin Cell Batteries. Rf Remote. If Controller Is Very Hot During Use, Please Give The Light Strips With A Separate Power Supply, Or With The Use Of Amplifiers..
▶Come With 3Pin Jst Connector And Dc Female Connector. Support All The 3 Pin Single Signal Ic Chip Led Product.The Remote Can Match Only One Receiver. One Remote Also Can Control Many Receivers . Just Plug And Play. No Soldering Is Needed. Save User Setting Automatically When Power Off. It Can Adjust The Color Order Rgb Grb Brg Etc .When You Press Green,The Led Is Red . This Is Not The Quality Problem , Please Read The User Manual And Set It Correctly..
Features
- Support WS2811 WS2812B LED LED lights. It can t control SK6812 RGBW LED lights and regular RGB LED without driver IC. 300+ kinds of color modes, such as rainbow, wave, breathing, strobing, gradual change, color cycle, comet, static, fading, chasing, which are vivid and beautiful. Color changing speed and brightness are adjustable.
- Come with 3pin JST connector and DC female connector. Support all the 3 PIN Single signal IC chip LED product.The remote can match only one receiver. One remote also can control many receivers . Just plug and play. No soldering is needed. Save user setting automatically when power off. It can adjust the Color order RGB GRB BRG etc .When you press Green,the LED is red . This is not the quality problem , please read the user manual and set it correctly.
- 32-98FT(10-30M) long distance wireless RF remote control. mini size, convenient to use. DC 5V~24V input. But it can t regulate the output voltage.Please choose power supply according to your led lights, not the controller. For example, DC5V WS2812B LED Strip ,must use DC5V power supply. ***Input voltage=output voltage.
- The controller contains coin cell batteries. RF remote. If controller is very hot during use, please give the light strips with a separate power supply, or with the use of amplifiers.
- Support setting controlled pixels number. Maximum number of control pixels : Total 2048pixels(Controller factory default 300 pixel points). recommand use 300 pixel(Approx. 5 meters of light strip length.) The product itself can carry power 5V<30W, 12V<72W, 24V<144W, such as more than this power, please give the light strips with a separate power supply, or with the use of amplifiers, otherwise it will lead to controller overload damage.
- See more on Amazon...
Brand: RGBZONE | Manufacturer: RGBZONE
Dimensions: 0.01 x 3.39 x 1.57 inches
See On Amazon #3
RGBZONE RF Wireless Remote LED Controller, DC 5V/12V/24V for 5050 3528 5630 LED Strip Lights, 17-Key Wireless Remote Control Dimmer Controller, Mini 4-Pin RF LED Controler
Asin: B0144CIMSQ | Model: TE213 | PartNumber: TE213 | Ean: 0600740425318 | UPC: 600740425318
➤ Input Voltage 5-24V, 3 Output Channels With 12A Working Current Controller..
➤ 19 Dynamic Mode, 20 Static Colors, 5-Level For Speed..
➤ 1 Controller Matches With 1 Rf Remote, Both Enable You To Control Rgb Strip..
➤Ultra Slim Design Rf Remote, Memory Function..
Features
- Convenient LED controller kit--mini RGB controller + RF wireless remote.Tips;Because the line order of each factory RGB light bar is not uniform, our controller line sequence is RGB.
- Ultra slim design RF remote, Memory function.
- Input voltage 5-24V, 3 output channels with 12A working current controller.
- 1 controller matches with 1 RF remote, both enable you to control RGB strip.
- 19 dynamic mode, 20 static colors, 5-level for speed.
- See more on Amazon...
Brand: RGBZONE | Manufacturer: RGBZONE
Weight: 0.02 Pounds
See On Amazon #4
SUPERNIGHT LED RGB Music Touch Controller RF Sensitivety Backlight RF Remote Touching Color 3.5MM Audio 15 Music Modes LED Light Strip Controller
Asin: B00JQ3QOSY | Model: EXPSFD006621 | PartNumber: EXPSFD006621 | Ean: 6921407542822, 5898405964615
With 3.5Mm Audio, Non-Interfered Music Mode Works Better.
Available For All Sorts Of Constant Voltage Rgb Lamps, Such As Rgb Strip Strip, Rgb Panel Lights, Rgb Light Modules Etc..
Color Changing Is More Exquisite With Pwm.
Used Convenient At Night With Led Backlight.
Features
- Controlled by radio-frequency capacitive touch, effective control distance up to 20 m
- Used convenient at night with LED backlight
- With 3.5MM audio, non-interfered music mode works better
- Color changing is more exquisite with PWM
- Available for all sorts of constant voltage RGB lamps, such as RGB strip strip, RGB panel lights, RGB light modules etc.
- See more on Amazon...
Brand: SUPERNIGHT | Manufacturer: SUPERNIGHT
Dimensions: 7.10 x 5.50 x 1.50 inches | Weight: 0.55 pounds
See On Amazon #5
SUPERNIGHT RGB Light Strip Remote Controller, RF Remote of 2-in-1 4 Pin Dimming, Brightness Flash Mode Dimmer for SMD 5050 2835 3528 LED Strip Lights (RF- 2 Ports)
Asin: B08K7C2DK2
【6 Diy Models】The Rich Diy Model Can Meet Your Needs, You Can Set 6 Diy Models For Your Light!.
【2-Ports Connector】(Package Comes With 1Pcs X 2-Ports Remote Controller) You Can Connect 1 Or 2 Rolls Of Led Strips As You Like. One Remote Can Control 2 Rolls Of Strips At The Same Time..
【4-Pin Connector】Compatible With Smd 5050, Smd 3528, Smd 2835 Rgb Led Strip Lights With 4-Pin Connector..
【44 Key Remote】Easy For You To Choose Static Colors, Adjust Brightness, Turn On/Off, Control Modes: Flash, Strobe, Fade, Rgb Smooth-Change, Static..
Features
- RF vs IR RF Radio frequency remote can work through wall or other obstacle with range of about 50 feet, but IR remote can not work through any obstacle.
- 44 Key Remote Easy for you to choose static colors, adjust brightness, turn On/Off, control modes: Flash, Strobe, Fade, RGB Smooth-change, Static.
- 6 DIY models The rich DIY model can meet your needs, you can set 6 DIY models for your light!
- 4-pin Connector Compatible with SMD 5050, SMD 3528, SMD 2835 RGB LED Strip lights with 4-pin connector.
- 2-Ports Connector (Package comes with 1pcs x 2-Ports remote controller) You can connect 1 or 2 rolls of led strips as you like. One remote can control 2 rolls of strips at the same time.
- See more on Amazon...
Brand: SUPERNIGHT | Manufacturer: SUPERNIGHT
See On Amazon #6
BZONE 2-Port 44 Keys Wireless IR Remote Controller for SMD 5050 3528 RGB LED Strip Lights, Dual 4-pin Output Remote Controller Dimmer for 2pcs RGB LED Strips DC12-24V
Asin: B06WVKV6P5 | Model: TCS | PartNumber: TCS | Ean: 6921407812840
【Ir Remote】The Ir Remote Has About 30 Feet Effetive Control Distance. Please Note: Ir Remote Must Be Pointed Directly At The Devices You Are Trying To Control..
【For Rgb Strip Light】Special For 5050 3528 4-Pin Led Strip Light, Work With 12V Power Supply (Package Will Not Come With Power Or Strip).
【Easy To Use】If You Want A Straight-Forward, Simple To Use, Cost-Effective Remote, Our This 2-In-1 Remote Is The Way To Go..
【2-In-1 Connectors】Work With Dc 12V-24V Power Supply, The Other 4-Pin Ends For 2 Reel Led Rgb Strip Lights. One Remote Can Control 2 Reels Of Strips At The Same Time..
Features
- 44 Keys Remote Controller You can choose 20 static colors, adjust brightness, turn On/Off, control modes: Flash, Strobe, Fade, RGB Smooth-change, Static, DIY frequently-used modes as you like.
- 2-IN-1 Connectors Work with DC 12V-24V power supply, the other 4-pin ends for 2 reel LED RGB strip lights. One remote can control 2 reels of strips at the same time.
- IR Remote The IR remote has about 30 feet effetive control distance. Please note: IR remote must be pointed directly at the devices you are trying to control.
- Easy to Use If you want a straight-forward, simple to use, cost-effective remote, our this 2-IN-1 remote is the way to go.
- For RGB Strip Light Special for 5050 3528 4-pin LED strip light, work with 12V power supply (Package will Not come with power or strip)
- See more on Amazon...
Brand: BZONE | Manufacturer: BZONE
See On Amazon #7
BZONE RF LED Remote Controller, 2.4GHz Wireless RF Touch LED RGB Dimmer Controller for 5050 3528 RGB LED Strip Light 12V/24V
Asin: B01A9PKSUM | Model: TCS0364 | PartNumber: TCS0364 | Ean: 6921407790162
Rf Led Dimmer: The Touch Panel Ring Is Used For Easy Color Changing.
Rgb Remote Dimmer: Low Heat, Convenient Connection And Ease Of Use. And Problem Support 15-Days Refund..
Rf Controller: Radio Frequency Remote Control Works Through Walls With Range Of About 100 Feet.
A Single Rf Remote Controller Can Control An Unlimited Number Of Receivers.
Features
- Wireless RF Remote Control: DC12V -24V, MAx. 6 amps per channel at 12V to 24V DC for 12V&24V rgb led light strip.
- A Single RF remote controller can control an unlimited number of receivers
- RF Led Dimmer: The touch panel ring is used for easy color changing
- RF Controller: Radio frequency remote control works through walls with range of about 100 feet
- RGB Remote Dimmer: Low heat, convenient connection and ease of use. And problem support 15-days refund.
- See more on Amazon...
Brand: BZONE | Manufacturer: BZONE
See On Amazon #8
BTF-LIGHTING 5050SMD FCOB COB RGB RF Remote RC03RFB & C03RF Controller Kit 4 Zones RF 2.4GHz Wireless Remote Group Control PWM RGB (+ R G B) 4pin LED Strip Neon Rope Light DC5V DC12V DC24V
Asin: B0C5XKCWZ2 | Model: RC03RFB+1XC03RF | PartNumber: RC03RFB+1XC03RF
【2.4G Wireless Transmitting】Rc03rfb Remote Adopts Advanced 2.4Ghz Rf Wireless Transmission Technology. The Control Range Is Up To 98 Feet.The Touch Wheel+ Button Design, Simple To Operate.It Can Bring You A Better Experience.
【Voltage】Support Dc5v/Dc12v/Dc24v. 12V Led Strip,Please Use 12V Power Supply. Attention: The Maximum Allowable Current Through The Two Power Interfaces Of The Controller Is 5A And 12A Respectively..
【Package List】1X Rc03rfb Remote,1X C03rf Controller,1Xrf Remote Bracket,2X Screw,1Xdouble-Side Adhesive,1Xrc03rf Remote Control Manual,1Xc03rf Controller Manual (This Product Does Not Contain 3A Batteries).
【Brightness And Color Adjusting】You Can Adjust The Brightness And Light Color According To Your Different Use Requirements.16 Million Colors To Choose.New Black Appearance Of The Remote Control.Comfortable Hand Feeling..
【Group Control】4-Zone Group Control Separately, No Device Limits.Each Remote Can Match And Control One Or More Controller.Auto Transmitting And Synchronization The Signal,Independent Control Of Individual Areas.As Long As The Distance Between The Controllers Is No More Than 98 Feet In Open Environment, You Can Control The Controllers In 4 Different Areas.You Can Also Purchase Multiple Of Our Controllers Separately..
Features
- Compatible Lights Only support PWM 5050SMD 3528SMD 5630SMD RGB FCOB COB RGB 4 wires(+ R G B ) LED strip Neon Rope light. CAN NOT work with SPI LED strip light with IC, such as WS2811, WS2812B, WS2813, WS2814, WS2815, SK6812 etc.
- Group Control 4-zone group control separately, no device limits.Each remote can match and control one or more controller.Auto transmitting and synchronization the signal,Independent control of individual areas.As long as the distance between the controllers is no more than 98 feet in open environment, you can control the controllers in 4 different areas.You can also purchase multiple of our controllers separately.
- 2.4G Wireless Transmitting RC03RFB remote adopts advanced 2.4GHz RF wireless transmission technology. The control range is up to 98 feet.The touch wheel+ button design, simple to operate.It can bring you a better experience
- Brightness and Color adjusting You can adjust the brightness and light color according to your different use requirements.16 million colors to choose.New black appearance of the remote control.Comfortable hand feeling.
- Voltage Support DC5V/DC12V/DC24V. 12V LED strip,please use 12V power supply. ATTENTION: The maximum allowable current through the two power interfaces of the controller is 5A and 12A respectively.
- Package list 1x RC03RFB remote,1x C03RF controller,1xRF remote bracket,2x screw,1xdouble-side adhesive,1xRC03RF remote control manual,1xC03RF controller manual (This product does not contain 3A batteries)
- See more on Amazon...
Brand: BTF-LIGHTING | Manufacturer: BTF-LIGHTING Technology Co., Limited
See On Amazon #9
RF Mini Wireless Remote Controller for Single Color 3528 5050 LED Strip Lights, Wireless Remote Control with White DC Connector, RF Dimmer for 12V DC LED Ribbon, Shelf Lights
Asin: B0CN3LXKWR | Model: WCC2002 | PartNumber: WCC2002
Very Easy To Operate, Comes With 11 Key Remote Control..
*Speed+ /Speed- :Adjust Lighting Speed In Dynamic Mode..
*Light Key: Switch To Static Lighting Mode From Dynamic Mode.
*Key 100%, 50% Or 25% Is For Brightness Adjustment..
1 To 1 Remote Paired. Autosave Function, Both Are The Same Frequency; Turn Off The Remote, Press The Keys "Speed-" And "Speed+" In 5 Seconds, Then The Light Will Flash, They Will Be Different Frequencies..
*On/Off Button: Switch To Turn On Or To Standby Mode.
Smooth Dimmer Effect. Speed And Brightness Adjustable..
*Mode+ / Mode-: Switch To Dynamic Mode From Static Lighting Mode Or Switch Between Dynamic Modes..
Voltage: Dc 5-24V ,Output Current: 6A..
Features
- Can be used to control LED single color strip lights.
- Voltage: DC 5-24V ,Output Current: 6A.
- Very easy to operate, Comes with 11 key Remote Control.
- Smooth Dimmer Effect. Speed and brightness adjustable.
- 1 to 1 remote paired. Autosave function, Both are the same frequency; Turn off the remote, press the keys SPEED- and SPEED+ in 5 seconds, then the light will flash, they will be different frequencies.
- *ON/OFF button: switch to turn on or to standby mode
- *LIGHT key: switch to static lighting mode from dynamic mode
- *Key 100%, 50% or 25% is for brightness adjustment.
- *MODE+ / MODE-: switch to dynamic mode from static lighting mode or switch between dynamic modes.
- *SPEED+ /SPEED- :adjust lighting speed in dynamic mode.
- See more on Amazon...
Brand: Generic | Manufacturer: Green Lantern Optoelectronic
See On Amazon #10
BZONE RGB LED Controller 2-Port 4Pin Dual Output with 44 Keys IR LED Light Remote Control DC12V-24V for 5050 3528 RGB LED Strip Lights
Asin: B089VVQGKG | Model: 575689 | PartNumber: 575689
Use: The Controller Is Dedicated To 4-Pin Led Strips, The Voltage Is Dc12-24V, The Maximum Current Can Pass 6A, You Can Use It With A 12V Power Supply. (Without Light Strip And Power Supply).
Tips:Suitable For 4-Pin 5050 3528 2835 Rgb Strip Lights, Not Suitable For 5-Pin Strip Lights..
Safety: The Remote Controller Has Been Approved Ce, Rohs, Fcc Certification, Low Voltage, Low Heat, No Radiation, It Is Safe And Touchable..
Mode: 20 Lighting Colors, 5 Lighting Modes: Static/Flash/Strobe/Gradient/Rgb Smooth Change. 6 Diy Buttons, You Can Freely Adjust The R/G/B Color. The Brightness Can Be Adjusted..
Features
- 2-in-1 Function: The controller box has 2 4-pin ports, which can control 2 light strips at the same time.
- Mode: 20 lighting colors, 5 lighting modes: static/flash/strobe/gradient/RGB smooth change. 6 DIY buttons, you can freely adjust the R/G/B color. The brightness can be adjusted.
- Use: The controller is dedicated to 4-pin LED strips, the voltage is DC12-24V, the maximum current can pass 6A, you can use it with a 12V power supply. (Without light strip and power supply)
- Safety: The remote controller has been approved CE, RoHs, Fcc certification, Low voltage, Low heat, no radiation, it is safe and touchable.
- Tips:Suitable for 4-pin 5050 3528 2835 RGB strip lights, not suitable for 5-pin strip lights.
- See more on Amazon...
Brand: BZONE | Manufacturer: BZONE
Dimensions: 1.18 x 4.13 x 2.36 inches
See On Amazon #11
RGBZONE 5050 3528 4PIN LED Strip Controller, DC12V-24V 4Pin 2 Ports Low Voltage LED Controller, 44-Keys Wireless IR Remote Controller for 5050 2835 3528 LED Strip Lights
Asin: B06Y4GBGQL
▶16-26Ft(5-8M) Long Distance Wireless Rf Remote Control. Mini Size, Convenient To Use. Dc 5V~24V Input. But It Can’T Regulate The Output Voltage.Please Choose Power Supply According To Your Led Lights, Not The Controller. For Example, Dc12v 5050 Led Strip ,Must Use Dc12v Power Supply, 24V Led Strips Must Not Be Connected To A 12 Power Supply.【***Input Voltage=Output Voltage.】.
▶The Product Itself Can Carry Power 12V<72W, 24V<144W, Such As More Than This Power, Please Give The Light Strips With A Separate Power Supply, Or With The Use Of Amplifiers, Otherwise It Will Lead To Controller Overload Damage..
▶The Controller Contains Coin Cell Batteries. Rf Remote. If Controller Is Very Hot During Use, Please Give The Light Strips With A Separate Power Supply, Or With The Use Of Amplifiers..
▶Come With 2-Ports 4Pin Connector And Dc Female Connector. Support All The 4 Pin Led Product. This Led Strip Controller Can Connector 2 Roll Led Strip. No Soldering Is Needed. Save User Setting Automatically When Power Off..
Features
- Support 5050 3528 5630 LED lights. It has 20 static colors, adjust brightness, 8 control modes : Static/ Flash/ Strobe/ Fade-change/ RGB Smooth-change. 6 DIY modes to mix all your colors you want, give you an ultimate enjoyment.
- Come with 2-Ports 4pin connector and DC female connector. Support all the 4 PIN LED product. This led strip Controller can connector 2 roll led strip. No soldering is needed. Save user setting automatically when power off.
- 16-26FT(5-8M) long distance wireless RF remote control. mini size, convenient to use. DC 5V~24V input. But it can t regulate the output voltage.Please choose power supply according to your led lights, not the controller. For example, DC12V 5050 LED Strip ,must use DC12V power supply, 24V LED strips must not be connected to a 12 power supply. ***Input voltage=output voltage.
- The controller contains coin cell batteries. RF remote. If controller is very hot during use, please give the light strips with a separate power supply, or with the use of amplifiers.
- The product itself can carry power 12V<72W, 24V<144W, such as more than this power, please give the light strips with a separate power supply, or with the use of amplifiers, otherwise it will lead to controller overload damage.
- See more on Amazon...
Brand: RGBZONE | Manufacturer: RGBZONE
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.15 pounds
See On Amazon #12
RGBZONE 2Pack Mini RGB LED Controller DC 5-24V 3x2A, 3-Key Button 4 Pin LED Controller Control for 5050 3528 5630 LED Strip Lights, Adjustable Modes & Speeds & Color & Brightness
Asin: B07RPF8W56 | Model: FB0046 | PartNumber: FB0046
▶𝟑-𝐊𝐞𝐲 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧𝐬: Mode: Dynamic Modes Switch; Speed/Bright: Adjust The Speed(Dynamic Modes) Or Brightness(Static Modes); Color: Static Color Replacement..
▶𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐛𝐥𝐞 𝐋𝐢𝐠𝐡𝐭 𝐁𝐚𝐫 𝐓𝐲𝐩𝐞𝐬: For 3528 5050 5630 Rgb Led Strip Light. Suitable For Electrical Installation, Compatible With Automotive, Marine And Household Led Light Strips Or Led Bulbs..
▶𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧𝐚𝐥 𝐀𝐝𝐯𝐚𝐧𝐭𝐚𝐠𝐞: According To Customer Requirements To Achieve 19 Kinds Of Dynamic Effects, 20 Kinds Of Static Effects; Dynamic Speed And Brightness Adjustable And Other Characteristics..
▶𝐏𝐫𝐨𝐝𝐮𝐜𝐭 𝐏𝐚𝐫𝐚𝐦𝐞𝐭𝐞𝐫𝐬: Working Voltage:12-24V Dc; Max Output Current: 3*2A; Max Output Power: 144W..
Features
- : 2pcs Mini 3-button MINI RGB controller. Manual button, DC head. Interface type: 4PIN pin.
- : Working Voltage:12-24V DC; Max Output Current: 3*2A; Max Output Power: 144W.
- - : MODE: Dynamic modes switch; SPEED/BRIGHT: Adjust the speed(dynamic modes) or brightness(static modes); COLOR: Static color replacement.
- : According to customer requirements to achieve 19 kinds of dynamic effects, 20 kinds of static effects; Dynamic speed and brightness adjustable and other characteristics.
- : For 3528 5050 5630 RGB LED Strip Light. Suitable for electrical installation, compatible with automotive, marine and household LED light strips or LED bulbs.
- See more on Amazon...
Brand: RGBZONE | Manufacturer: RGBZONE
Dimensions: 0.20 x 6.10 x 0.43 Inches
See On Amazon #13
VIPMOON 2 Pack 11 Key RF Mini Wireless Remote Controller with DC 5-24V for 3528 5050 Single Color LED Strip Lights Wireless Switch Control Dimmer
Asin: B01MFH9J2D | Model: FB5159 | PartNumber: FB5159 | Ean: 0600740429453 | UPC: 600740429453
Rf Remote Control Led Dimmer Can Control Brightness Of Led Strip, Flashing, And Flashing Mode..
Note: About The Remote Not Work, Please Try This Way (Images 2), 1 To 1 Remote Paired: Press The Two Buttons (Speed- And Speed+) At The Same Time, Meanwile You Will See The Light Is Flashing, Then The Product Can Be Used Normally..
Mini Rf Remote Controller For 5050 3528 5630 3014 Single Color Led Strip Lights. Tip: 5V Strip Light Must Connect With 5V Power Supply. 12V Strip Light Must Connect With 12V Power Supply..
Working Voltage: Dc 5V-24V. Max Current: 6A. Remote Distance: >15M At Open Area..
Features
- 8 types Dynamic mode: gradual change, signal light, strobe, breathe, candlelight etc.
- Working Voltage: DC 5V-24V. Max Current: 6A. Remote distance: >15m at open area.
- RF remote control led Dimmer can control brightness of led strip, flashing, and flashing mode.
- Mini RF Remote Controller for 5050 3528 5630 3014 Single Color LED Strip Lights. Tip: 5V strip light must connect with 5V power supply. 12V strip light must connect with 12V power supply.
- NOTE: About the remote not work, please try this way (images 2), 1 to 1 remote paired: press the two buttons (SPEED- and SPEED+) at the same time, meanwile you will see the light is flashing, then the product can be used normally.
- See more on Amazon...
Brand: VIPMOON | Manufacturer: VIPMOON
Dimensions: 0.20 x 0.63 x 0.20 inches | Weight: 0.13 pounds
See On Amazon #14
RGBZONE Mini 4 PIN RGB IR LED Controller 24 Keys for SMD 3528 5050 5630 RGB LED Strips DC 5V-24V, Adjust Speed/Brightness/Color/Scene
Asin: B00PBOJM2M | Model: 4334417644 | PartNumber: 4334417644 | Ean: 0600740425295 | UPC: 600740425295
▶Safe To Use--Low Voltage: Output Current: (3X2a)6A, Input Voltage: Dc 5-24V. The Remote Controller Has Been Low Voltage, Low Heat, No Radiation, It Is Safe And Touchable..
▶Easy To Use: If You Want A Straight-Forward, Simple To Use, Cost-Effective Remote, Our This 24 Keys Ir Remote Controller Dimmer Is The Way To Go. Package Included: 1 X Ir Controller 1 X 24 Key Ir Remote Controller.(Cr2025 Is Included In The Remote Control. Pull Out The Plastic Piece Before Use.) Tips: Input Voltage = Output Voltage..
▶Ir Remote Controller: Ir Remotes Have A Performance Range Of About 30 Feet, Point To The Sensor Indicator Light When You Use Please Note: Ir Remotes Must Be Pointed Directly At The Devices You Are Trying To Control..
▶Compatible With Rgb Strip: Work With Smd 5050 3528 2835 Rgb Led Light Strips With 4-Pin Connectors. (Not For Rgbw Strips Which Has 5-Pin Connectors.).
Features
- Multi-Functions LED IR Controller: There are 16 colors and 4 light pattern: Flash/Strobe/Fade-change/RGB Smooth-change. Easy for you to turn ON/OFF strip lights, DIY colors as you like and adjust brightness.
- Compatible with RGB Strip: Work with SMD 5050 3528 2835 RGB led light strips with 4-Pin connectors. (Not for RGBW strips which has 5-pin connectors.)
- Safe to Use--Low voltage: Output current: (3x2A)6A, Input voltage: DC 5-24V. The remote controller has been low voltage, low heat, no radiation, it is safe and touchable.
- IR Remote Controller: IR remotes have a performance range of about 30 feet, point to the sensor indicator light when you use Please note: IR remotes must be pointed directly at the devices you are trying to control.
- Easy to Use: If you want a straight-forward, simple to use, cost-effective remote, our this 24 keys IR remote controller dimmer is the way to go. Package included: 1 x IR Controller 1 x 24 Key IR Remote Controller.(CR2025 is included in the remote control. Pull out the plastic piece before use.) Tips: Input voltage = Output voltage.
- See more on Amazon...
Brand: RGBZONE | Manufacturer: RGBZONE
See On Amazon #15
Wet Sounds RF-RGB-MC V2 RF Controller for LED Lighting
Asin: B01HU9O73Y | Model: RF-RGB-MC V2 | PartNumber: RF-RGB-MC V2 | Ean: 0853414005235 | UPC: 853414005235
Multiple Zones: The Controller Can Operate Up To 8 Different Zones Of Rgb Lighting, Allowing You To Customize The Lighting Effects Throughout Your Boat..
Compatibility: The Rf-Rgb-Mc V2 Is Compatible With All Wet Sounds Rgb Lighting Systems, Making It An Ideal Addition To Your Audio Setup..
Vibrant Colors: Choose From A Wide Range Of Vibrant Colors To Create The Perfect Ambiance For Your On-The-Water Experience..
Music Sync: With Music Sync Capability, The Controller Can Adjust The Lighting Effects To Match The Rhythm And Beat Of Your Favorite Tunes..
Features
- EASY CONTROL: The RF-RGB-MC V2 allows easy control of your Wet Sounds RGB lighting system with a touch-activated remote.
- MUSIC SYNC: With music sync capability, the controller can adjust the lighting effects to match the rhythm and beat of your favorite tunes.
- MULTIPLE ZONES: The controller can operate up to 8 different zones of RGB lighting, allowing you to customize the lighting effects throughout your boat.
- VIBRANT COLORS: Choose from a wide range of vibrant colors to create the perfect ambiance for your on-the-water experience.
- COMPATIBILITY: The RF-RGB-MC V2 is compatible with all Wet Sounds RGB lighting systems, making it an ideal addition to your audio setup.
- See more on Amazon...
Brand: wet sounds | Manufacturer: Wet Sounds
Dimensions: 5.00 x 6.00 x 2.00 Inches
See On Amazon #16
RGBZONE DC 5V USB RF RGB LED Controller, 17-Key RF Wireless Remote Control, 4 PIN 5050 3528 2835 RGB LED Strip Lights Controller
Asin: B07D3KJN4B | Model: FB1189 | PartNumber: FB1189
▶The Volts Of The Power Supply Must Correspond To The Volts Of The Strip Light！！！If Very Dim, Only Displays Red Color. Please Check If The Strip Light Voltages Is The Same As The Power Volts..
▶Tips: Because The Line Order Of Each Factory Rgb Light Bar Is Not Uniform, Our Controller Line Sequence Is Rgb. The Problem That The Controller Does Not Correspond To The Strip Light Can Be Solved. First, Turn Off The Switch, Then Press The Button In The Lower Right Corner, The Strip Light Will Flash, Then Press The Three Keys Rgb To Adjust To The Color You Want, If It Does Not Correspond For The First Time, Repeat It A Few Times..
▶Connect The Light Strip With 4 Pin Plug On The One Side,And Plug It Into The Usb Port That Any One Can Drive It. 【Only Suitable For 5V Led Strip With 5V Power Supply】.
▶16 Colors, Adjustable Brightness, On/Off, 5 Light Patters: Flash, Strobe, Fade, Rgb Smooth-Change, Static.16-Speeds Control In Flash / Strobe / Fade-Change / Rgb Smooth-Change. Ir Remote..
Features
- Working voltage: DC 5V, the light strip and power supply must both be 5V (Input voltage 5V = Output voltage 5V). Simple connection, easy control, remote control distance is 10 meters.
- 16 colors, adjustable brightness, On/Off, 5 Light Patters: Flash, Strobe, Fade, RGB Smooth-change, Static.16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change. IR Remote.
- The volts of the power supply must correspond to the volts of the strip light If Very dim, only displays red color. Please check if the strip light voltages is the same as the power volts.
- Connect the light strip with 4 pin plug on the one side,and plug it into the USB port that any one can drive it. ONLY suitable for 5V led strip with 5V power supply
- Tips: Because the line order of each factory RGB light bar is not uniform, our controller line sequence is RGB. The problem that the controller does not correspond to the strip light can be solved. First, turn off the switch, then press the button in the lower right corner, the strip light will flash, then press the three keys RGB to adjust to the color you want, if it does not correspond for the first time, repeat it a few times.
- See more on Amazon...
Brand: RGBZONE | Manufacturer: RGBZONE
Dimensions: 1.00 x 7.00 x 4.00 inches
See On Amazon #17
RGBZONE Mini 4 PIN RGB IR LED Controller 44 Keys for SMD 3528 5050 5630 RGB LED Strips DC 5V-24V, Adjust Speed/Brightness/Color/Scene
Asin: B00PBOJNZS | Model: 4334417166 | PartNumber: 4334417166 | Ean: 0600740425301 | UPC: 600740425301
▶Safe To Use--Low Voltage: Output Current: (3X2a)6A, Input Voltage: Dc 5-24V. The Remote Controller Has Been Low Voltage, Low Heat, No Radiation, It Is Safe And Touchable..
▶Easy To Use: If You Want A Straight-Forward, Simple To Use, Cost-Effective Remote, Our This 44 Keys Ir Remote Controller Dimmer Is The Way To Go. Package Included: 1 X Ir Controller 1 X 44 Keys Ir Remote Controller.(Cr2025 Is Included In The Remote Control. Pull Out The Plastic Piece Before Use.) Tips: Input Voltage = Output Voltage..
▶Ir Remote Controller: Ir Remotes Have A Performance Range Of About 30 Feet, Point To The Sensor Indicator Light When You Use Please Note: Ir Remotes Must Be Pointed Directly At The Devices You Are Trying To Control..
▶Compatible With Rgb Strip: Work With Smd 5050 3528 2835 Rgb Led Light Strips With 4-Pin Connectors. (Not For Rgbw Strips Which Has 5-Pin Connectors.).
Features
- Multi-Functions LED IR Controller: There are 20 colors and 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change. Easy for you to turn ON/OFF strip lights, DIY colors as you like and adjust brightness.
- Compatible with RGB Strip: Work with SMD 5050 3528 2835 RGB led light strips with 4-Pin connectors. (Not for RGBW strips which has 5-pin connectors.)
- Safe to Use--Low voltage: Output current: (3x2A)6A, Input voltage: DC 5-24V. The remote controller has been low voltage, low heat, no radiation, it is safe and touchable.
- IR Remote Controller: IR remotes have a performance range of about 30 feet, point to the sensor indicator light when you use Please note: IR remotes must be pointed directly at the devices you are trying to control.
- Easy to Use: If you want a straight-forward, simple to use, cost-effective remote, our this 44 keys IR remote controller dimmer is the way to go. Package included: 1 x IR Controller 1 x 44 Keys IR Remote Controller.(CR2025 is included in the remote control. Pull out the plastic piece before use.) Tips: Input voltage = Output voltage.
- See more on Amazon...
Brand: RGBZONE | Manufacturer: RGBZONE
Weight: 0.07 pounds
See On Amazon #18
RGBZONE 5050 3528 2.4GHz WiFi Music LED Controller, 24Key Wireless IR Remote, Mic Control Music Sync RGB Controller Smart APP Control DC5V/12V/24V for SMD 5050 3528 4-Pin LED Lights (2 Ports)
Asin: B0BVR6BMBV | Model: FB0510 | PartNumber: FB0510
➤Parameters Of Use And Attention: A) Input Voltage: Dc5-24V, Input Voltage=Output Voltage, For Example, Dc5v 5050 Led Strip ,Must Use Dc5v Power Supply; B) Max Output Power: 100W, Such As More Than This Power, Please Give The Light Strips With A Separate Power Supply, Or Amplifiers; C) Net Weight: 0.14Pounds, Mini Led Music Controller, Convenient To Use; D)Working Temperature: -20~55℃(Suitable For Indoor Use)..
➤Unlimited Colors Mode: Your Rgb Strip Light Will Have More Colors Than Rgb. With 16 Millions Of Colors In Multi Modes To Choose. Gradual Color Changing, Jumping Color Changing, Music Beat Changing. You Can Diy And Change To The Color You Love Or Dim To Any Color Fitting For Your Mode..
➤High Compatibility Music Controller: This 2.4Ghz Wifi Smart Controller Is Compatible With Ios And Android Smartphones, And Can Be Used For Rgb 4Pin 10Mm Strips Such As 3528, 5050, 2835, And Also For One Strip Kit Or Two Strip Kits. (Not Suitable For 3Pin Or 5Pin Led Strip)..
➤About The [Music Led Controller]: There Are Two Method To Start The Music Control Function; A) The Controller Built-In Microphone, When You Enable The Mic Function, The Mic Has A Certain Sensitivity, Can Collect External Sound (Music) So That The Light Strip Connected To The Controller To The Sound Rhythm Change; B) Through The App Itself Music Control Function, The Phone Plays Music, The Lights Connected To The Controller With The Music Rhythm And Change..
Features
- Note before purchase: Controller's [two control method] and the resulting cautions. a) WIFI connection, APP control: Only for 2.4GHz wireless network, not for 5G network, control distance within 60m; b) 24 keys IR remote control controller: Remote control distance: 5-8m and need to align the remote control to the signal receiving head (remote control comes with a battery, replaceable, model CR2025).
- About the [music led controller]: There are TWO METHOD to start the music control function; a) The controller built-in microphone, when you enable the mic function, the mic has a certain sensitivity, can collect external sound (music) so that the light strip connected to the controller to the sound rhythm change; b) Through the APP itself music control function, the phone plays music, the lights connected to the controller with the music rhythm and change.
- Parameters of Use and Attention: a) Input Voltage: DC5-24V, Input voltage=output voltage, For example, DC5V 5050 LED Strip ,must use DC5V power supply; b) Max Output Power: 100W, Such as more than this power, please give the light strips with a separate power supply, or amplifiers; c) Net Weight: 0.14Pounds, Mini Led music controller, convenient to use; d)Working Temperature: -20~55 (Suitable for indoor use).
- High Compatibility Music Controller: This 2.4GHz Wifi smart controller is compatible with IOS and Android smartphones, and can be used for RGB 4PIN 10MM strips such as 3528, 5050, 2835, and also for one strip kit or two strip kits. (Not suitable for 3pin or 5pin LED strip).
- Unlimited Colors Mode: Your RGB strip Light will have more colors than RGB. With 16 millions of colors in multi modes to choose. Gradual Color Changing, Jumping color changing, Music beat changing. You can DIY and change to the color you love or dim to any color fitting for your mode.
- See more on Amazon...
Brand: RGBZONE | Manufacturer: RGBZONE
Dimensions: 2.00 x 15.80 x 10.60 inches | Weight: 0.14 pounds
See On Amazon #19
MEIRIYFA 4Pin Mini RGB RGBW LED Dimmer Amplifier Controller 12V -24V LED Strip Dimmer Controller Brightness Dimmer 3 Keys for DC 12V 24V 3528 5050 5050 RGB Led Strip Lighting (5PCS)
Asin: B0BVVCK54T
Speed Key: Function Adjustment Key. Press This Key In Dynamic Mode To Adjust The Speed Of Dynamic Mode. Each Time You Press It, You Can Switch Speeds. In Color Mode, You Can Adjust The Brightness Of The Light Bar. You Can Switch The Brightness Level Each Time You Press It..
On/Off Function: Hold Down The Speed Key For About 1 Second To Turn Off The Machine, Then Press Any Key To Return To The State Before Shutdown..
Color Key: Static Color Key. Press The Color Key To Switch Between A Variety Of Static Colors, Each Time To Switch A Static Color..
Mode Key: Dynamic Mode Key. Press It To Switch The Dynamic Effect. Press And Hold The Mode Button For More Than One Second To Switch To Demo Mode. In Demo Mode, Various Dynamic Modes Are Automatically Demonstrated In One Cycle..
Features
- MEIRIYFA Mini RGB LED Strip Controller uses advanced control technology to control various RGB lights with LED as the light source. For example, point light source, soft light strip, etc.
- MODE key: Dynamic mode key. Press it to switch the dynamic effect. Press and hold the Mode button for more than one second to switch to Demo mode. In Demo mode, various dynamic modes are automatically demonstrated in one cycle.
- SPEED key: Function adjustment key. Press this key in dynamic mode to adjust the speed of dynamic mode. Each time you press it, you can switch speeds. In Color mode, you can adjust the brightness of the light bar. You can switch the brightness level each time you press it.
- COLOR key: Static color key. Press the color key to switch between a variety of static colors, each time to switch a static color.
- On/Off function: Hold down the speed key for about 1 second to turn off the machine, then press any key to return to the state before shutdown.
- See more on Amazon...
Brand: MEIRIYFA | Manufacturer: shenzhen milidianzi
Dimensions: 0.04 x 1.57 x 0.08 inches
See On Amazon
Looking For Something Else?
Search