Adafruit (PID 3200 Teensy 3.x Feather Adapter
Asin: B01K60SAYQ | Model: 3200 | PartNumber: 3200 | Ean: 0717520029564 | UPC: 717520029564
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.100K Resistor Divider To Monitor The Battery Voltage Connected To A7.
Use Multiple Feather Add-On Boards.
Includes 500Ma Lipoly Charger.
Features
- Teensy 3.x to Adafruit Feather adapter
- Includes 500mA LiPoly charger
- 100K resistor divider to monitor the battery voltage connected to A7
- Use multiple Feather add-on boards
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.03 Pounds
See On Amazon Similar To Adafruit PID 3200 Teensy 3.x
#1
Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On
Asin: B00SK697AU | Model: SG_B00SK697AU_US | PartNumber: SG_B00SK697AU_US | Ean: 0711978442814, 0748347525106, 0789164326774, 7107568016306, 0720189973253, 3700386521249 | UPC: 720189973253, 711978442814, 748347525106, 789164326774
Will Work With Any Size Battery And Usb Port.
Charging Is Performed In Three Stages.
Features
- Ideally for use with the 3.3V Pro Trinkets & ItsyBitsy
- Charging is performed in three stages
- Will work with any size battery and USB port
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 4.72 x 3.35 inches
See On Amazon #2
Adafruit Trinket - Mini Microcontroller - 3.3V Logic [ADA1500]
Asin: B00KBXTFSO | Model: 100364 | PartNumber: 100364 | Ean: 0717520029328, 0720825758220, 0701980281075, 0013227006670 | UPC: 013227006670, 720825758220, 717520029328, 701980281075
Micro-Usb Jack For Power And/Or Usb Uploading, You Can Put It In A Box Or Tape It Up And Use Any Usb Cable For When You Want To Reprogram..
On-Board 3.3V Power Regulator With 150Ma Output Capability And Ultra-Low Dropout. Up To 16V Input, Reverse-Polarity Protection, Thermal And Current-Limit Protection..
~5.25K Bytes Available For Use (2.75K Taken For The Bootloader).
Usb Bootloader With A Nice Led Indicator Looks Just Like A Usbtinyisp So You Can Program It With Avrdude (With A Simple Config Modification) And/Or The Arduino Ide (With A Few Simple Config Modifications).
Features
- ATtiny85 on-board, 8K of flash, 512 byte of SRAM, 512 bytes of EEPROM Internal oscillator runs at 8MHz, but can be doubled in software for 16MHz
- USB bootloader with a nice LED indicator looks just like a USBtinyISP so you can program it with AVRdude (with a simple config modification) and/or the Arduino IDE (with a few simple config modifications)
- Micro-USB jack for power and/or USB uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram.
- ~5.25K bytes available for use (2.75K taken for the bootloader)
- On-board 3.3V power regulator with 150mA output capability and ultra-low dropout. Up to 16V input, reverse-polarity protection, thermal and current-limit protection.
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 2.00 x 1.00 inches | Weight: 0.02 Pounds
See On Amazon #3
Adafruit 4084 Adafruit Grand Central M4 Express Featuring SAMD51 - Without Headers
Asin: B07T3DBR8V | Ean: 4060137056628, 8436565503090
No Need For A Hardware Usb To Serial Converter As The Metro M4 Has Built In Usb Support.
Pre-Loaded With The Uf2 Bootloader, Which Looks Like A Usb Storage Key.
2.1Mm Dc Jack Has An On/Off Switch Next To It So You Can Turn Off Your Setup Easily.
Features
- Same shape and pinout as our Metro's, so it is compatible with all Adafruit's shields
- 2.1mm DC jack has an on/off switch next to it so you can turn off your setup easily
- No need for a hardware USB to Serial converter as the Metro M4 has built in USB support
- Pre-loaded with the UF2 bootloader, which looks like a USB storage key
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.97 x 2.76 x 0.39 inches
See On Amazon #4
Adafruit ItsyBitsy M4 Express Featuring ATSAMD51
Asin: B07KV2Y6LM | Ean: 0606034877689 | UPC: 606034877689
Brand: Adafruit | Manufacturer: Adafruit
See On Amazon #5
Adafruit (PID 3591) HUZZAH32 ESP32 Feather Board (pre-soldered)
Asin: B079QGXX88 | Model: 8541612388 | PartNumber: 8541612388 | Ean: 0791954231892 | UPC: 791954231892
Recommended For Makers Who Have Some Experience With Microcontroller Programming..
Pre-Assembled Headers.
Esp32 Has Way More Gpio Than The Esp8266.
Features
- Module is nestled in at the end of this Feather contains a dual-core ESP32 chip
- ESP32 has way more GPIO than the ESP8266
- Recommended for makers who have some experience with microcontroller programming.
- Pre-assembled headers
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 Inches | Weight: 0.19 pounds
See On Amazon #6
Adafruit 3885 Stemma Speaker - Plug and Play Audio Amplifier
Asin: B082MNXJG5 | Model: 3885 | PartNumber: 3885
Class D Audio Amplifier.
Adjustable Volume.
Good Sound Quality For Music, Tones, Or Speech.
1W 8Ohm Speaker.
Features
- Easy to connect - Only need ground, 3 or 5V Power and an audio signal
- 1W 8Ohm speaker
- Class D Audio Amplifier
- Good sound quality for music, tones, or speech
- Adjustable volume
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.02 pounds
See On Amazon #7
Adafruit ItsyBitsy 32u4-5V 16MHz
Asin: B079SMYDRQ | Model: ADA-3677 | PartNumber: ADA-3677 | Ean: 4573252941903, 0789185843762 | UPC: 789185843762
Can Act As A Usb Hid Keyboard, Mouse, Midi Or Plain Usb 'Cdc' Serial Device.
Upgrade From The Pro Trinket 5V - Native Usb So It Will Work With All Computers, Usb Serial Debugging, And Is A More Reliable Bootloader.
5V Power And Logic, 16Mhz Clock Rate, 2Kb Ram And 28K Flash.
Features
- ATmega32u4 onboad chip in QFN package
- 5V power and logic, 16MHz clock rate, 2KB RAM and 28K FLASH
- Can act as a USB HID Keyboard, Mouse, MIDI or plain USB 'CDC' serial device
- Upgrade from the Pro Trinket 5V - native USB so it will work with all computers, USB serial debugging, and is a more reliable bootloader
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.01 pounds
See On Amazon #8
Adafruit [3527 PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi
Asin: B07MM68H8M | Model: 3527 | PartNumber: 3527 | Ean: 0791954230826, 7442870791788 | UPC: 791954230826
Nice And Compact So It Will Fit Into Any Case.
Works With Any Raspberry Pi Computer.
Made Of 128X32 Individual White Oled Pixels And Because The Display Makes Its Own Light, No Backlight Is Required.
Features
- Only the I2C pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc
- Made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required
- Nice and compact so it will fit into any case
- Works with any Raspberry Pi computer
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.59 x 0.59 x 1.97 inches | Weight: 0.01 pounds
See On Amazon #9
Adafruit 1.44" Color TFT LCD Display with MicroSD Card breakout [ADA2088]
Asin: B00SK6932C | Model: 2088 | PartNumber: 2088 | Ean: 0711978442807 | UPC: 711978442807
Can Be Used With Every Kind Of Microcontroller Even Low Memor, Small Ones With Few Available Pins.
Displays Full 16-Bit Color Using Adafruit's Library Code.
Has Its Own Pixel-Addressable Frame Buffer.
Features
- Best way to add a small, colorful and bright display to any project
- Has its own pixel-addressable frame buffer
- Can be used with every kind of microcontroller even low memor, small ones with few available pins
- Displays full 16-bit color using Adafruit's library code
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.18 x 4.33 x 2.17 inches | Weight: 0.02 Pounds
See On Amazon #10
Adafruit MiniBoost 5V @ 1A - TPS61023 Ada 4654
Asin: B09H121GJ3 | Model: 4654 | PartNumber: 4654
More Specifics In Description Section.
Perfect For Use With Battery-Powered Projects With 2 Or 3 Alkaline, Or A Single Lithium Battery.
Features
- Input 2-5VDC on one side, and get 5V at up to 1A supply on the other.
- Perfect for use with battery-powered projects with 2 or 3 Alkaline, or a single Lithium battery
- More specifics in Description section
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #11
Adafruit 4201 Airlift ESP32 WiFi Co-Processor Breakout Board
Asin: B07Z587RBF | Model: 4201 | PartNumber: 4201
Send Basic But Powerful Socket-Based Commands Over 8Mhz Spi For High Speed Data Transfer.
Fully Assembled And Tested, Pre-Programmed With Esp32 Spi Wifi Co-Processor Firmware.
Works Great With Circuitpython, A Samd51/Cortex M4 Minimum Required Since We Need A Bunch Of Ram.
A Tri-State Chip For Mosi So You Can Share The Spi Bus With Other Devices.
Features
- ESP32 module on a PCB with level shifting circuitry
- A tri-state chip for MOSI so you can share the SPI bus with other devices
- Send basic but powerful socket-based commands over 8MHz SPI for high speed data transfer
- Works great with CircuitPython, a SAMD51/Cortex M4 minimum required since we need a bunch of RAM
- Fully assembled and tested, pre-programmed with ESP32 SPI WiFi co-processor firmware
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.03 Pounds
See On Amazon #12
Adafruit Lithium Ion Polymer Battery - 3.7v 150mAh
Asin: B011OA5UTU | Model: 1317 | PartNumber: 1317 | Ean: 3700386513176
The Included Protection Circuitry Keeps The Battery Voltage From Going Too High (Over-Charging) Or Low (Over-Use) Which Means That The Battery Will Cut-Out When Completely Dead At 3.0V. It Will Also Protect Against Output Shorts..
The Batteries Come Pre-Attached With A Genuine 2-Pin Jst-Ph Connector As Shown And Include The Necessary Protection Circuitry..
Features
- This battery has a capacity of 150mAh for a total of about 0.6 Wh.
- The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry.
- The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts.
- See more on Amazon...
Manufacturer: ADAFRUIT
Dimensions: 1.10 x 5.20 x 3.90 inches
See On Amazon #13
Adafruit WiFi / 802.11 Development Tools Huzzah ESP8266 Breakout (1 Piece)
Asin: B0131V0WYI | Model: 2471 | PartNumber: 2471
Ean: 7107565741782, 0788476065548, 7107562015725, 0717520030263, 7107561518517, 3700386524714, 0600346598843, 7107564853493, 0717520031468
UPC: 717520030263, 717520031468, 788476065548, 600346598843
Dimensions: 38 Mm X 25 Mm X 5 Mm Interface Type: I2c/Spi, Uart Packaging: Bulk Tradename:.
Features
- Price For: Pack of 1 Manufacturer: Adafruit Industries Product Category: WiFi / 802.11 Development Tools RoHS: Product: Breakout Boards Tool Is For Evaluation Of: ESP8266 Protocol Supported: 802.11 b/g/n Frequency: 2.4 GHz Operating Supply Voltage: 3.3 V Antenna Connector Type: Internal Brand: Adafruit Description/Function: Breakout board for ESP8266
- Dimensions: 38 mm x 25 mm x 5 mm Interface Type: I2C/SPI, UART Packaging: Bulk Tradename:
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.02 pounds
See On Amazon #14
Adafruit GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3 [ADA2223]
Asin: B071H8R8C3 | Model: NA | PartNumber: NA | Ean: 0604776612483 | UPC: 604776612483
Extra Long, Square, 10Mm Pins Compared To Plain 3Mm Pins.
You Can Have A Hat That Has Extra Pins To Stack Another Hat On Top.
Now With Thicker Pins To Maintain A Better Mechanical/Electrical Connection.
Features
- Normal-height female header with extra long pins
- Now with thicker pins to maintain a better mechanical/electrical connection
- Extra long, square, 10mm pins compared to plain 3mm pins
- You can have a HAT that has extra pins to stack another HAT on top
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 1.57 x 2.36 inches | Weight: 0.00 Pounds
See On Amazon #15
Adafruit Perma-Proto Full-sized Breadboard PCB - 3 Pack! [ADA590]
Asin: B00SK8KAMM | Ean: 0711978441213 | UPC: 711978441213
Big 1.2Mm Through Plated Drill Holes.
Gold Plated Finish.
60 Rows Of Double 5 Hole Rows.
Features
- 3 pack of PCB proto-boards
- 60 rows of double 5 hole rows
- Big 1.2mm through plated drill holes
- Gold plated finish
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.10 x 6.20 x 2.00 inches | Weight: 0.01 pounds
See On Amazon #16
Adafruit (4028) CircuitPython Starter Kit with Adafruit Itsy Bitsy M4
Asin: B07MFZLX4R | Model: 4028 | PartNumber: 4028 | Ean: 7442870791733
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.00 Pounds
See On Amazon #17
Adafruit 4502 Adafruit ISM330DHCX - 6 DoF IMU - Accelerometer and Gyroscope - Stemma QT/Qwiic
Asin: B084H3KC4B | Model: 4502 | PartNumber: 4502
Accelerometer: ±2/±4/±8/±16 G At 1.6 Hz To 6.7Khz Update Rate..
Gyroscope: ±125/±250/±500/±1000/±2000/±4000 Dps At 12.5 Hz To 6.7 Khz.
This Imu Sensor Has 6 Degrees Of Freedom.
Features
- ST ISM330DHCX: an industrial quality Accelerometer+Gyroscope 6-DOF IMUs (inertial measurement unit) from ST.
- This IMU sensor has 6 degrees of freedom
- accelerometer: 2/ 4/ 8/ 16 g at 1.6 Hz to 6.7KHz update rate.
- gyroscope: 125/ 250/ 500/ 1000/ 2000/ 4000 dps at 12.5 Hz to 6.7 KHz
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.10 pounds
See On Amazon #18
Adafruit ATWINC1500 WiFi Breakout
Asin: B01GVI1NKA | Model: 2999 | PartNumber: 2999 | Ean: 0748347530650, 0743724369304 | UPC: 748347530650, 743724369304
Since This Is Our New Favoritest Spi-Protocol Wifi Module We've Decided To Make A Little Breakout For It. The Breakout Comes With Level Shifting On All The Input Pins So You Can Use It With 3V Or 5V Logic. A 3.3V Voltage Regulator That Can Handle The 300Ma Spikes Lets You Power From 3-5.5Vdc..
There's Also 3 Leds That You Can Control Over The Spi Interface (Part Of The Library Code) Or You Can Have Controlled By The Arduino Library. They'll Light Up When Connected To An Ssid, Or Transmitting Data..
This Module Works With 802.11B, G, Or N Networks & Supports Wep, Wpa And Wpa2 Encryption. You Can Use It In Soft Ap Mode To Create An Ad-Hoc Network. For Secure Client Connections, There Is Tls 1.2 Support In Firmware 19.4.4!.
Features
- The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino M0's and M4s but does not work on Uno (328P) and may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds.
- This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!
- Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC.
- There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data.
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 3.74 x 2.56 inches | Weight: 0.01 Pounds
See On Amazon #19
Adafruit RGB Positive 16x2 LCD+Keypad Kit for Raspberry Pi [ADA1109]
Asin: B00KB2K872 | Model: 1109 | PartNumber: 1109 | Ean: 0711978441459, 0700153591515 | UPC: 700153591515, 711978441459
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 Pounds
See On Amazon #20
Adafruit (PID 1430) NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix
Asin: B06ZZHG4C4 | Model: 4328435612 | PartNumber: 4328435612 | Ean: 0717520031239 | UPC: 717520031239
Includes Terminal Block To Power From External 4-6V Power Supply (Need To Cut Solder Jumper).
Stacking And Plain Headers Included.
Shields Can Be Chained (Dout From First Shield To Din On Second Shield).
5V Powered From The Main Board (As Long As You Are Not Lighting Up All The Pixels Full Power White).
Features
- 40 RGB LED matrix (5x8) Shield for Arduino
- 5V powered from the main board (as long as you are not lighting up all the pixels full power white)
- Includes terminal block to power from external 4-6V power supply (need to cut solder jumper)
- Shields can be chained (DOUT from first shield to DIN on second shield)
- Stacking and plain headers included
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches
See On Amazon
Looking For Something Else?
Search