Hobbypower Pixhawk PX4 V2.4.8 32Bit Flight Controller with Shock Absorber and XT60 Plug Power Module for FPV Quadcopter Multirotor
Asin: B01MQKGGTA | Ean: 0712096466683 | UPC: 712096466683
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Integrated Backup Power Supply And Failure Backup Controller, The Main Controller Can Be Safely Switched To Backup Control.
Provide Redundant Power Input And Fault Transfer Function.
Provide Automatic And Manual Mode.
Bus Interface (Uart, I2c, Spi, Can).
Features
- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system
- Bus interface (UART, I2C, SPI, CAN)
- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control
- Provide automatic and manual mode
- Provide redundant power input and fault transfer function
- See more on Amazon...
Brand: Hobbypower | Manufacturer: Hobbypower
See On Amazon Similar To Hobbypower Pixhawk PX4 V2.4.8 32Bit
#1
Holybro Pixhawk PM07 14S Power Module
Asin: B0BB13RQPY | Ean: 0764613348293 | UPC: 764613348293
Features
- This PM07 Power Module supplies clean 5.2V to flight controller from the battery and provides current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable, along with integrated esc power & signal distribution for up to 8 ESCs.PM07 has two 5.2V power output port that can provide redundant power to the flight controller, with independent circuits, BEC IC and circuitry.It is also great for flight controller that do not have built-in servo header pins like the
- See more on Amazon...
Brand: Holybro | Manufacturer: Holybro
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.06 Pounds
See On Amazon #2
Cube Flight Controller Durable Board Connectors for Every Function of Pixhawk Cube, Redundant Power Supplies for Flight-Critical Components, Micro USB Cable, 12v/2A Power Cable
Asin: B0CZN1C7D2
✔️Up To 12-Cell Lithium Battery (50.4V).
✔️140A Continuous Current With 280A Surges.
✔️Good Power And Error Indicator Lights.
✔️Built-In Buzzer With Volume Control.
Features
- Built-in voltage and current sense
- Built-in buzzer with volume control
- Up to 12-cell Lithium battery (50.4V)
- Good power and error indicator lights
- 140A continuous current with 280A surges
- See more on Amazon...
Brand: multirotors.store | Manufacturer: NWBlue
See On Amazon #3
for Holybro PM06 V2-14S Power Module Applicable for Pixhawk 4 Pixhawk 4 Mini Durandal Pix32 V5 Flight Controller DIY Parts (Color : 2PCS)
Asin: B0B2KCMW8X | Ean: 7545069862907
Ubec Output: Dc 5.1V~5.3V. Ubec Output Current: 3A Max (Note: To Ensure Proper Heat Dissipation, Ubec Output Current Needs To Be Limited To <2A When Using 14S Battery.).
Amperes Per Volt: 36.364.
Voltage Divider: 18.182.
Power Module Rated Current: 60A. Power Module Max Current: 120A (<60 Sec).
Features
- Input voltage: 2S-14S
- Power Module rated current: 60A. Power Module max current: 120A (<60 sec)
- UBEC output: DC 5.1V~5.3V. UBEC output current: 3A Max (Note: To ensure proper heat dissipation, UBEC output current needs to be limited to <2A when using 14S battery.)
- Voltage Divider: 18.182
- Amperes per Volt: 36.364
- See more on Amazon...
Manufacturer: YALIWEIDIAN
Weight: 0.00 Pounds
See On Amazon #4
9 PCS 1.25mm to Dupont 2.54mm Pitch Adapter Cables Wire Compatible with JST Molex PicoBlade 1.25 for Pixhawk Flight Controller RC Drone 2Pin to 8P
Asin: B07PWZTC88 | Model: WI-PB125-01 | PartNumber: WI-PB125-01 | Ean: 0053554159045 | UPC: 053554159045
You Can Achieve Connection Between Flight Controller And Gps, Telemetry Module, Power Module, Bluetooth Module, Osd, Airspeed Meter, Optical Flow Sensor Or Ultrasonic Sensor Etc.
One Side Is 1.25Mm Pitch Connector, The Other Side Is 2.54Mm Pitch Dupont Connector.
20Cm Length. Ultra Soft Silicone Wire, Still Has Very Good Flexibility At Low Temperature..
Compatible With Molex Picoblade Connector, And Suitable For Pixhawk And Apm2.X Flight Controller. Etc..
Features
- Includes 9 pieces of cables (2pin*1, 3pin*1, 4pin*2, 5pin*1, 6pin*2, 7pin*1, 8pin*1)
- Compatible with Molex PicoBlade connector, and suitable for Pixhawk and APM2.x flight controller. etc.
- You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc
- 20cm length. Ultra soft silicone wire, still has very good flexibility at low temperature.
- One side is 1.25mm pitch connector, the other side is 2.54mm pitch dupont connector
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.39 x 7.87 x 0.39 inches
See On Amazon #5
Pixhawk PX4 PIX 2.4.8 Flight Controller NEO-M8N GPS 3DR 915Mhz Radio Telemetry Set OSD Module PPM Module I2C Splitter Expand Module Power Module for FPV Quadcopter Multirotor
Asin: B07NRMFTXL | Model: 0209-915 | PartNumber: 0209-915 | Ean: 0662565863690 | UPC: 662565863690
Lifetime Friendly Customer Service: If You Are Not Satisfied With The Product, Please Contact Us!.
Noted:Please Use Application: Mission Planner To Connect And Calibrate..
Features
- PIXHAWK intergrated the newest 32 bit chip technology and sensor technology, get rid of the dilemma of having only 8 bit CPU of APM, and CPU occupancy being too high.
- Noted:please use application: Mission Planner to connect and calibrate.
- Lifetime friendly customer service: If you are not satisfied with the product, please contact us!
- See more on Amazon...
Brand: SoloGood | Manufacturer: SoloGood
See On Amazon #6
APM 2.5 2.6 2.8 for Pixhawk Power Module 30V 90A with 5.3V DC BEC with T XT60 Plug for RC Drone Helicopter Part Quadcopters Accessories (XT60)
Asin: B0BCJM3R5P | Model: BEC | PartNumber: BEC
6P Cable Can Be Directly Connected For Apm/Pixhawk Flight Control. Additional 4P Rows Of Pin-Free To Wire/Pin Connection To Control Another Flight.
Notice:Many Buyer Burned This Cable When Connet It To 6S Battery Because He Solder The Cable To Our This Module Cable.Please Don't Connect Or Solder Any Other Cable On This Current Cable,Otherwise It Will Be Burned Power Module Is A Simple Way Of Providing Your Apm/Arduflyer With Clean Power From A Lipo Battery As Well As Current Consumption And Battery Voltage Measurements, All Through A 6P Cable..
Designed To Power Servos. Use Your Aircraft's Own Esc/Bec For That..
Note: The Power Module Is Only Designed To Power Apm, A Rc Receiver And Apm Accessories (Gps, 3Dr Radio). It Is Notdesigned To Power Servos. Use Your Aircraft's Own Esc/Bec For That..
Voltage And Current Measurement Configured For 5V Adc..
Used Up To 8S Lipo And At A Maximum Of 90A.Maximum Current: 90A. Maximum Voltage: 30V.
Features
- Input voltage: 6 ~ 30V (2 ~ 8S),Output voltage: 5.3V 0.1V,Maximum output current: 3A
- Used up to 8S LiPo and at a maximum of 90A.Maximum current: 90A. Maximum voltage: 30V
- 6P cable can be directly connected for APM/Pixhawk flight control. Additional 4P rows of pin-free to wire/PIN connection to control another flight
- Voltage and current measurement configured for 5V ADC.
- designed to power servos. Use your aircraft's own ESC/BEC for that.
- Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It is notdesigned to power servos. Use your aircraft's own ESC/BEC for that.
- Notice:Many buyer burned this cable when connet it to 6S battery because he solder the cable to our this module cable.please don't connect or solder any other cable on this current cable,otherwise it will be burned Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable.
- See more on Amazon...
Brand: Nuofany | Manufacturer: Nuofany
Dimensions: 0.10 x 0.10 x 0.10 inches
See On Amazon #7
Readytosky Pixhawk PX4 Flight Controller Pixhawk 2.4.8 32 Bit Flight Control Board+Safety Switch+Buzzer+I2C Splitter Expand Module+4GB SD Card
Asin: B07CHQ7SZ4 | Model: X81 | PartNumber: X81
★★★We Have M8n Gps For The Pixhawk Flight Controller,Asin : B01kk9a8qg..
★★★And The 3Dr Radio Telemetry Kit For This Flight Controller,Asin: B01dhv4dva..
★★★Please Do Not Use Qground But Use Mission Planner..
Features
- The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
- Please do not use Qground but use Mission planner.
- We have M8N GPS for the Pixhawk flight controller,ASIN : B01KK9A8QG.
- And the 3DR Radio Telemetry Kit for this flight controller,ASIN: B01DHV4DVA.
- See more on Amazon...
Brand: Readytosky | Manufacturer: Readytosky
See On Amazon #8
FPVDrone Power Module 5.3V BEC with XT60 Plug Compatible with APM2.5 APM2.6 APM2.8 APM Pixhawk Flight Controller
Asin: B06XFW1X3K | Model: 43234-2253 | PartNumber: 43234-2253 | Ean: 0757450335373 | UPC: 757450335373
★Switching Regulator Outputs 5.3V And 3A Max..
★★★Note: The Power Module Is Only Designed To Power Apm, A Rc Receiver And Apm Accessories (Gps, 3Dr Radio). It Isnotdesigned To Power Servos. Use Your Aircraft's Own Esc/Bec For That..
★★★Used Up To 8S Lipo And At A Maximum Of 90A..
★6-Pos Df13 Cable Plugs Directly To Apm 2.5'S 'Pm' Connector..
Features
- Voltage and current measurement configured for 5V ADC.
- 6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector.
- Switching regulator outputs 5.3V and 3A max.
- Used up to 8S LiPo and at a maximum of 90A.
- Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft's own ESC/BEC for that.
- See more on Amazon...
Brand: FPVDrone | Manufacturer: LongJinSheng
Dimensions: 0.31 x 4.02 x 2.52 inches | Weight: 0.13 Pounds
See On Amazon #9
Pixhawk PX4 PIX 2.4.8 Flight Controller 32 Bit Flight Control Board+Safety Switch+Buzzer+I2C Splitter Expand Module+4GB SD Card for FPV Quadcopter Multirotor
Asin: B0CPDVW2TP | Ean: 0766157606631 | UPC: 766157606631
Lifetime Friendly Customer Service: If You Are Not Satisfied With The Product, Please Contact Us!.
Noted:Please Use Application: Mission Planner To Connect And Calibrate..
Features
- PIXHAWK intergrated the newest 32 bit chip technology and sensor technology, get rid of the dilemma of having only 8 bit CPU of APM, and CPU occupancy being too high.
- Noted:please use application: Mission Planner to connect and calibrate.
- Lifetime friendly customer service: If you are not satisfied with the product, please contact us!
- See more on Amazon...
Brand: SoloGood | Manufacturer: SoloGood
Dimensions: 1.00 x 4.00 x 3.00 inches | Weight: 0.20 pounds
See On Amazon #10
Holybro Pixhawk PDB Board (for Pixhawk 6X & 6C)
Asin: B0BB15CCHW | Ean: 0764613348323 | UPC: 764613348323
Features
- This Holybro Pixhawk Power Distribution Board (PDB) is used for PM02, PM02D, or similar power modules. This PDB is perfect for the Pixhawk 6X & 6C products.Power modules with build-in power distribution such as the PM03, PM06, and PM07 would not require this PDB. Note: Power modules with build-in power distribution such as the PM03, PM06, and PM07 would not require this PDB. This option does NOT include a XT30 pre-soldered cable. The option with XT30 pre-soldered goes perfectly with the ESC & M
- See more on Amazon...
Brand: Holybro | Manufacturer: Holybro
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.04 Pounds
See On Amazon #11
Radiolink PIXHAWK Flight Controller 2.4.8 32 Bit with Power Module, Safety Switch, Buzzer, 4G SD Card, FC for Plane/3-8 Copter/VTOL/Car/Boat/Robot/Mower
Asin: B0BY1797VF | Model: PIXHAWK 2.4.8 | PartNumber: PIXHAWK 2.4.8
Easier Setting--No Complicated Setup For Beginner And Expert Pilots, Easy To Operative Calibration Settings On Mission Planner(Normally Setting Same As The Apm Pixhawk, Flash Firmware Please Download Radiolink's Mission Planner).
Multiple Function--Support Osd And Gps Module And More, Suit For Long-Wheelbase Quadcopter And 6-8 Axis Multirotor..
Stabilization--Producing By Automatic And Unique Automation Software Testing, It Achieved Interference Less From Inner Components, Built-In Barometer Sensor To Make Altitude Hold Stabilization..
High-End Configuration--Advanced 32F427 Arm Cortex M4 Core High-Performance Processor, 32Bit Fail-Safe Co-Processor, Mpu 6000 3-Axis Accelerometer..
Features
- Excellent Performance--New layout and technical upgrade base on 3DR PIX. A powerful hardware device can create, you can implement more functions as you want by simple programming.
- High-end Configuration--Advanced 32F427 ARM Cortex M4 Core high-performance processor, 32bit fail-safe co-processor, MPU 6000 3-axis accelerometer.
- Easier Setting--No complicated setup for beginner and expert pilots, easy to operative calibration settings on Mission Planner(Normally setting same as the APM PIXHAWK, flash firmware please download Radiolink's Mission Planner)
- Stabilization--Producing by automatic and unique automation software testing, it achieved interference less from inner components, built-in barometer sensor to make altitude hold stabilization.
- Multiple Function--Support OSD and GPS module and more, suit for long-wheelbase quadcopter and 6-8 axis multirotor.
- See more on Amazon...
Brand: Radiolink | Manufacturer: Radiolink
Dimensions: 2.00 x 6.70 x 4.20 inches | Weight: 0.08 pounds
See On Amazon #12
Midzooparts PX4FLOW V1.3.1 Optical Flow Sensor Smart Camera with MB1043 Ultrasonic Module Sonar for PX4 PIX Pixhawk Flight Control System
Asin: B09P45QJF3 | Ean: 4174125527448
Features
- PX4FLOW V1.3.1 Optical Flow Sensor Smart Camera with MB1043 Ultrasonic Module Sonar for PX4 PIX Pixhawk Flight Control System
- See more on Amazon...
Brand: Midzooparts | Manufacturer: Midzooparts
See On Amazon #13
Hobbypower Power Module V1.0 for Pixhawk Apm2.5 Apm2.6 Ardupilot Mega Flight Controller
Asin: B00HC5XGC0 | Model: 4977 | PartNumber: 4977 | Ean: 0799418412030 | UPC: 799418412030
Input Voltage: 6~28V (Support 30V).
Voltage And Current Measurement Configured For 5V Adc.
Max Current Sensing: 90A.
Top Quality And 100% Brand New.
Features
- Newest version, have soldered already, ready to work!
- Top quality and 100% brand new
- Input voltage: 6~28V (support 30V)
- Max current sensing: 90A
- Voltage and current measurement configured for 5V ADC
- See more on Amazon...
Brand: Hobbypower | Manufacturer: Hobbypower
Weight: 0.02 pounds
See On Amazon #14
Pixhawk 6x-Rt (Developer Edition) Cutting-Edge Flight Controller with Real Time Processing, Designed for Advanced Uav Development and Experimentation, Perfect for Drone Enthusiasts and Professionals Alike!
Asin: B0CXZCBVBD
✔️Redundant Inertial Measurement Unit (Imu) From Bosch & Invensense.
✔️A Newly Designed Integrated Vibration Isolation System To Filter Out High-Frequency Vibration And Reduce Noise To Ensure Accurate Readings.
✔️Imus Are Temperature-Controlled By Onboard Heating Resistors, Allowing The Optimum Working Temperature Of Imus.
✔️High-Performance H7 Processor With A Clock Speed Of Up To 480 Mhz.
Features
- New cost-effective design with low-profile form factor
- High-performance H7 Processor with a clock speed of up to 480 MHz
- Redundant inertial measurement unit (IMU) from Bosch & InvenSense
- IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
- A newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- See more on Amazon...
Brand: multirotors.store | Manufacturer: Holybro
Dimensions: 6.70 x 4.20 x 2.00 inches | Weight: 0.16 Pounds
See On Amazon #15
Micro OSD V2 Module for Pixhawk4 / Pixhawk4 Mini/Durandal Flight Controller RC Drone
Asin: B09NCDHF15 | Ean: 7733477133478
Features
- Micro OSD V2 Module for Pixhawk4 / Pixhawk4 Mini/ Durandal Flight Controller RC Drone
- See more on Amazon...
Brand: GalaxyElec | Manufacturer: GalaxyElec
See On Amazon #16
JFtech Flight Controller Shock Absorber RC Glass Fiber Anti-Vibration Damping Plate Set for APM 2.6/2.8/2.5 Pixhawk PX4 KK MWC
Asin: B07C5X35PM | Model: AJF01001114H | PartNumber: AJF01001114H | Ean: 0763846889245 | UPC: 763846889245
Size：100*70*1.5Mm (Large Plate) /91*61*1.5Mm (Small Plate).
This Glass Fiber Flight Controller Anti-Vibration Shock Absorber Damping Plate Set Is Good For Apm, Pixhawk, Kk And Mwc Etc..
Weight: 24G.
Material: Glass Fiber.
Features
- Brand new and high quality
- Material: Glass fiber
- Size 100*70*1.5mm (Large Plate) /91*61*1.5mm (Small plate)
- Weight: 24g
- This glass fiber flight controller anti-vibration shock absorber Damping Plate set is good for APM, Pixhawk, KK and MWC etc.
- See more on Amazon...
Brand: JFtech | Manufacturer: H-JFTECH
See On Amazon #17
QWinOut Pixhawk PX4 RGB External LED USB Extension Module Full Color w/Protective Case for RC Drone
Asin: B01NCNME10 | Model: M19509 | PartNumber: M19509
But The Problem Is Pixhawk Fengyun Led Upward, Can Only Be Viewed On The Ground, In The Air, Unable To Recognize The Status Of The Flight Control, The Other Is Surrounded By Many Racks Are Full Design, Flight Control, While Being Well-Protected User Can Not Easily Connect Usb Line. So We Refer To The Official Parts Design And Launch Of This Combo Pixhawk-Rgb Module Functions..
Instructions For Use: The Interface Flags 4P Cable Plug Connected Pixhawk I2c Part Of The Flight Control I2c Port, If The I2c Port Is Occupied, Please Use I2c Breakout Board; Another Part Of Usb Plug Connected To The Flight Control Of The Usb Port, You Can Complete The Connection; Use, On-Board Flight Control Rgb Light Will Automatically Turn Off, Unplug The Plug Is For The Use Of The Onboard I2c Rgb Again..
Pixhawk Powerful Self-Evident, Its High Integrated Multifunction Lamp Brightness Rgb Full Color, Easy To Identify The Status Of The Flight Control, Compared To The Previous Apm Is More Intuitive, Is A Great Design..
Features
- I2C LED Module for Pixhawk PX4 with USB Extension Function External Indicators Full Color LED, with Shell
- Pixhawk powerful self-evident, its high integrated multifunction lamp brightness RGB full color, easy to identify the status of the flight control, compared to the previous APM is more intuitive, is a great design.
- But the problem is Pixhawk Fengyun LED upward, can only be viewed on the ground, in the air, unable to recognize the status of the flight control, the other is surrounded by many racks are full design, flight control, while being well-protected user can not easily connect USB line. So we refer to the official parts design and launch of this combo Pixhawk-RGB module functions.
- Instructions for use: The interface flags 4P cable plug connected Pixhawk I2C part of the flight control I2C port, if the I2C port is occupied, please use I2C Breakout Board; another part of USB plug connected to the flight control of the USB port, you can complete the connection; use, on-board flight control RGB light will automatically turn off, unplug the plug is for the use of the onboard I2C RGB again.
- See more on Amazon...
Brand: QWinOut | Manufacturer: QWinOut
See On Amazon #18
FainWan Power Module V1.0 with XT60 Plug Compatible with APM2.8 APM2.6 APM Pixhawk Flight Controller
Asin: B0B7GCVF4W | Model: XT60-Plug--Flight--Controller | PartNumber: XT60-Plug--Flight--Controller | Ean: 0755524737122 | UPC: 755524737122
In Addition The Module Also Comes With Bec Function, You Can Output 5.3 Dc, 3A Maximum Continuous Current For The Flight Control Board To Provide A Stable Power Supply. Another Signal Cable Connectors Are Used In Japan Original Fittings, Non-Domestic Joint, So Apm Flight Control Board And Reliable Connection Between The Power Supply Module..
Note: The Power Module Is Only Designed To Power Apm, A Rc Receiver And Apm Accessories (Gps, 3Dr Radio). It Is Not Designed To Power Servos. Use Your Aircraft's Own Esc/Bec For That..
6-Pos Df13 Cable Plugs Directly To Apm 2.5'S 'Pm' Connector.
Used To Detect The Battery Voltage And The Battery Current, Flight Control Board Receives Two Signals, Calculate The Remaining Battery Power, Estimate The Remaining Flight Time..
Features
- The APM Power Module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.
- Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time.
- In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module.
- 6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector
- Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
- See more on Amazon...
Brand: FainWan | Manufacturer: FainWan
See On Amazon #19
Hobbypower OLED Display Module I2C Monitor for Pixhawk PX4 PIX4 Flight Controller
Asin: B07XQ6Q7PH | Model: 4962 | PartNumber: 4962
3. The Firmware Must Be Used In The Official 3.5 Or Above Version, And It Cannot Be Used Below 3.5..
5. Display Information Includes: Arming Failure Messages.
4. This Product Is Only Suitable For Pixhawk Flight Control, Not Suitable For Apm Flight Control..
2. If You Add Gps To The Flight Control, You Must Add The I2c Expansion Board, Because The I2c Port Of The Flight Control Is Not Enough..
Features
- Features: 1. The biggest advantage of LED display is that it can easily view the status of flight control in the outdoor, report error, etc., without OSD, no data transmission.
- 2. If you add GPS to the flight control, you must add the I2C expansion board, because the I2C port of the flight control is not enough.
- 3. The firmware must be used in the official 3.5 or above version, and it cannot be used below 3.5.
- 4. This product is only suitable for PIXHAWK flight control, not suitable for APM flight control.
- 5. Display information includes: arming failure messages
- See more on Amazon...
Brand: Hobbypower | Manufacturer: Hobbypower
See On Amazon #20
Hobbypower Power Module V1.0 with XT60 Plug for APM2.8 APM2.6 APM Pixhawk Flight Controller
Asin: B00JWMLWIG | Model: Power Module | PartNumber: Power Module | Ean: 0712096458787 | UPC: 712096458787
In Addition The Module Also Comes With Bec Function, You Can Output 5.3 Dc, 3A Maximum Continuous Current For The Flight Control Board To Provide A Stable Power Supply. Another Signal Cable Connectors Are Used In Japan Original Fittings, Non-Domestic Joint, So Apm Flight Control Board And Reliable Connection Between The Power Supply Module..
Used To Detect The Battery Voltage And The Battery Current, Flight Control Board Receives Two Signals, Calculate The Remaining Battery Power, Estimate The Remaining Flight Time..
Features
- The APM Power Module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.
- Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time.
- In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module.
- See more on Amazon...
Brand: Hobbypower | Manufacturer: Hobbypower
See On Amazon
Looking For Something Else?
Search