Teng Tools 28 Piece Drill Bit Set - DB028
Asin: B06XH8LXQG | Model: DB028 | PartNumber: DB028 | Ean: 5020385220645
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Supplied In A Plastic Folding Box.
Lifetime Guarantee.
Drill Diameters - Mm - 1.0(X4), 1.5(X3), 2.0(X2), 2.5, 3.0, 3.3, 3.5, 4.0 Drill Diameters Contd - Mm - 4.2, 4.5, 5.0, 5.5, 6.0, 6.5, 6.8, 7.0, 8.0, 9.0, 10.0.
Spiral Angle Of 28 Degrees And A Split Point Of 118 Degrees For Use On Steel And Cast Iron Split Point For Better Positional Accuracy.
Features
- 28 piece standard drill bit set supplied in a plastic folding box 1.0(x4), 1.5(x3), 2.0(x2), 2.5, 3.0, 3.3, 3.5, 4.0 4.2, 4.5,5, 5.5, 6, 6.5, 6.8, 7, 8, 9, 10mm
- Spiral angle of 28 degrees and a split point of 118 degrees for use on steel and cast iron Split point for better positional accuracy
- Supplied in a plastic folding box
- Drill diameters - mm - 1.0(x4), 1.5(x3), 2.0(x2), 2.5, 3.0, 3.3, 3.5, 4.0 Drill diameters contd - mm - 4.2, 4.5, 5.0, 5.5, 6.0, 6.5, 6.8, 7.0, 8.0, 9.0, 10.0
- Lifetime Guarantee
- See more on Amazon...
Brand: Teng Tools | Manufacturer: Teng Tools
Dimensions: 5.46 x 2.36 x 2.24 inches | Weight: 1.03 Pounds
See On Amazon Similar To Teng Tools 28 Piece Drill
#1
uxcell Reduced Shank Drill Bit 28mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank
Asin: B07KS48C6F | Model: a18101200ux0134 | PartNumber: a18101200ux0134
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 28mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.51 x 3.94 inches
See On Amazon #2
Forstner Drill Bits 28mm (1-3/32 inch) Tungsten Carbide Wood Hole Saw Auger Opener Woodworking Drilling Tool Wood Cutter
Asin: B09NGWQRLL | Ean: 0768492039938 | UPC: 768492039938
[Specifications] Drilling Dia.: 28Mm; Shank Dia.: 10Mm; Drilling Depth: 54Mm; Total Length: 88Mm..
[Note] 1. Sharp Parts Contained, Please Keep Away From Children And Pets. 2. Can Not Be Used For Metal Processing, Or The Drill Bits Will Get Damaged Quickly. 3. Material Must Be Fixed During Cutting, And The Drill Bit Should Be Perpendicular To The Material. 4. Set Slow Drilling Speed Till The Drill Bit Is Completely Located, Then Gradually Accelerate Speed. 5. Water Should Be Injected When Processing Hardwood, In Order To Improve Drilling Accuracy And Quality..
[Applications] Suitable For Cutting Holes Onto Solid Wood, Softwood, Hardwood, Plywood, Mdf, Chipboard, And Also Plastic, Rubber, Fiberglass. Can Be Used In Drill Press, Bench Drill, Vertical Drilling Machine, Cnc Carving Machine, Etc...
[Material] The Cutting Edge Is Made Of K30 Monolithic Tungsten Carbide, Hardness ≥90Hra, Bending Strength >1900N/Cm2, Resharpenable For A Longer Service Life. It Has The Advantages Of High Hardness, Wear Resistance, Good Toughness, Heat Resistance And Corrosion Resistance. The Shank Is Made Of Steel 45#..
Features
- [SPECIAL DESIGN] Using these sharp drill bits, you can drill accurate, smooth, neat holes without burrs, even in end-grain and through knots. Arc curve design head contributes to removing sawdust faster, making your work more efficient.
- [MATERIAL] The cutting edge is made of K30 monolithic tungsten carbide, hardness 90HRA, bending strength >1900N/cm2, resharpenable for a longer service life. It has the advantages of high hardness, wear resistance, good toughness, heat resistance and corrosion resistance. The shank is made of steel 45#.
- [SPECIFICATIONS] Drilling dia.: 28mm; shank dia.: 10mm; drilling depth: 54mm; total length: 88mm.
- [APPLICATIONS] Suitable for cutting holes onto solid wood, softwood, hardwood, plywood, MDF, chipboard, and also plastic, rubber, fiberglass. Can be used in drill press, bench drill, vertical drilling machine, CNC carving machine, etc..
- [NOTE] 1. Sharp parts contained, please keep away from children and pets. 2. Can NOT be used for metal processing, or the drill bits will get damaged quickly. 3. Material must be fixed during cutting, and the drill bit should be perpendicular to the material. 4. Set slow drilling speed till the drill bit is completely located, then gradually accelerate speed. 5. Water should be injected when processing hardwood, in order to improve drilling accuracy and quality.
- See more on Amazon...
Brand: STORMCUBE | Manufacturer: STORMCUBE
Weight: 0.22 Pounds
See On Amazon #3
Drill America DWDN28P12 #28 High Speed Steel Black Oxide Drill Bit (Pack of 12), DWDN Series
Asin: B00FXI5BMQ | Model: DWDN28P12 | PartNumber: DWDN28P12 | Ean: 0887861191777 | UPC: 887861191777
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #4
WEN DB291A 29Piece Gold Oxide Hss Drill Bit Set with Carrying Case
Asin: B07WFWBK91 | Model: DB291A | PartNumber: DB291A | Ean: 0044459991632 | UPC: 044459991632
Sizes Range From 1/16 To 1/2 Of An Inch In 1/64-Inch Increments.
Works On Metals, Woods, Plastics, And More.
Perfect Accessory For Drill Presses And Power Drills.
135-Degree Split Point Minimizes Walking And Slips.
Features
- Gold oxide finish resists heat while fighting rust and corrosion
- 135-degree split point minimizes walking and slips
- Sizes range from 1/16 to 1/2 of an inch in 1/64-inch increments
- Perfect accessory for drill presses and power drills
- Works on metals, woods, plastics, and more
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
See On Amazon #5
uxcell 28mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank
Asin: B07MQ3VDZ2 | Model: a18103100ux0202 | PartNumber: a18103100ux0202
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 28mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 7.48 x 1.97 inches
See On Amazon #6
Teng Tools 569 Piece Complete Mixed Mega Master Hand Tool Kit with 53 Inch Wide Roller - TCMMIND08
Asin: B06XHQ2TFB | Model: TCMMIND08 | PartNumber: TCMMIND08 | Ean: 5020385212169
5 Cutting Tools, 5 Files, 74 Ratcheting Bits & Driver, 28 Drill Bits, 8 Pick Up Tools.
Lifetime Warranty. See Description Below For Full List Of Contents.
Every Tool Has Its Own Specific Place. Every Tool Tray Clicks Together For Total Tool Organization.
50 Wrenches/Spanners, 42 Tx/Tpx/Hex Key & Drivers, 47 Impact Tools, 13 Extensions, 5 Measuring Tools.
Features
- 9 drawer 53 inch wide roller cabinet, 252 sockets & accessories, 17 pliers, 22 screwdrivers
- 50 wrenches/spanners, 42 TX/TPX/Hex key & drivers, 47 impact tools, 13 extensions, 5 measuring tools
- 5 cutting tools, 5 files, 74 ratcheting bits & driver, 28 drill bits, 8 pick up tools
- Every tool has its own specific place. Every tool tray clicks together for total tool organization
- Lifetime warranty. See description below for full list of contents
- See more on Amazon...
Brand: Teng Tools | Manufacturer: Teng Tools
Weight: 431.76 Pounds
See On Amazon #7
28 Piece Screwdriver Bit set
Asin: B00MW9ID7Y | Ean: 0079522975530 | UPC: 079522975530
To Remove And Fit Nuts And Screws.
Manufacturer: Handyman Tools of America
See On Amazon #8
Teng Tools 28 Piece Drill Bit Set - TTDB28
Asin: B00CYLP8WI | Ean: 5020385220584
Shank - Same As Drills Diameter.
Lifetime Guarantee.
Spiral Angle Of 28 Degrees And A Split Point Of 118 Degrees For Use On Steel And Cast Iron.
Drills Diameter - Mm - 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 10.0, 11.0, 12.0, 13.0.
Features
- Performance - Fully Ground
- Drills diameter - mm - 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 10.0, 11.0, 12.0, 13.0
- Shank - same as drills diameter
- Spiral angle of 28 degrees and a split point of 118 degrees for use on steel and cast iron
- Lifetime Guarantee
- See more on Amazon...
Brand: Teng Tools | Manufacturer: Teng Tools
Dimensions: 1.82 x 10.63 x 5.63 inches
See On Amazon
Looking For Something Else?
Search