Taytools 6 Inch Rigid Machinist Rule Ruler Hardened Spring Steel 4R Graduations in 1/8, 1/16, 1/32 and 1/64 Inches MRSAE
Asin: B06XR37NJ8 | Ean: 0791617732292 | UPC: 791617732292
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Rule Is Precision Photo Etched And Black Filled For Long Life And Easy Readability.
Brushed Finish.
Graduated With Quick Reading 1/8" And 1/16" Increments On One Side And 1/32" And 1/64" On The Other.
Rigid Blade Is 6" Long, .040” Thick And 1” Wide.
Features
- Made from hardened spring steel.
- Rigid blade is 6 long, .040 thick and 1 wide
- Rule is precision photo etched and black filled for long life and easy readability
- Graduated with quick reading 1/8 and 1/16 increments on one side and 1/32 and 1/64 on the other
- Brushed finish
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks LLC
See On Amazon Similar To Taytools 6 Inch Rigid Machinist
#1
2 Pack Stainless Steel Ruler Machinist Engineer Ruler, Metric Ruler with Markings 1/8, 1/16, 1/32, 1/64 Inch for Engineering, School, Office, Architect, and Drawing (12 Inch, 6 Inch)
Asin: B07ZPRW4CY | Model: EBOOT-RULERS-04 | PartNumber: EBOOT-RULERS-04
Clear Engraved Markings: Markings Are Engraved Onto The Ruler So They Will Not Rub Off Over Time; Clear Marks Provide Accurate Measurement.
Practical Uses: Precision Stainless Steel Ruler Is Handy To Use As Drawing Straight Edge Or Measuring Device; Good For Office, School, Drawing, Engineering And Other Tasks.
Features
- Warm notice: the ruler has squared off angles, please pay attention to it avoid scratching your hand; Children use under adult supervision
- Practical uses: precision stainless steel ruler is handy to use as drawing straight edge or measuring device; Good for office, school, drawing, engineering and other tasks
- Clear engraved markings: markings are engraved onto the ruler so they will not rub off over time; Clear marks provide accurate measurement
- See more on Amazon...
Brand: EBOOT | Manufacturer: eBoot
Dimensions: 0.39 x 12.20 x 1.38 inches
See On Amazon #2
Benchmark Tools 106616 6 Rigid Woodworking Ruler with End Grads Satin Chrome Finish 1/8th and 1/16th Grads Hardened Stainless Steel
Asin: B0BH7RTR1X
Rule Is Finished With A Satin Chrome Finish That Minimizes Scratches And Corrosion And Increases Readability By Achieving A Brighter, Non-Glare Finish That Enhances The Contrast Between The Black Graduation Lines And The Surface Of The Rule..
Each Rule Comes In Vinyl Storage Pouch. These Are Well Made Rules And Will Provide Years Of Reliable Service In Any Shop..
Specifications: 6” Long X 3/4” Wide X 0.040” Thick. Rule Comes With End Graduation Marks On Both Ends Of The Rule..
Our Rules Are Made From Japanese Rust-Resistant Stainless Steel That Has Been Tempered Creating A Ruler That Can Flex If Needed And Snap Back Straight. The Edges And Ends Have Been Ground Parallel, Straight, Smooth And Square. Graduations Are Produced Via A Photoengraving Process Creating Very Consistent And Accurate Markings With Uniform Line Widths. Once Etched, Graduations Are Black Filled For Maximal Readability. Graduations Are Etched And Not Printed So Will Not Wear Off With Prolonged Use. Graduations Conform To Strict International Eec 1 Accuracy Standards, I.E. +/- 0.2Mm At 20° C For 1000Mm Ruler. Markings Feature Quick-Reading 1/8Ths And 1/16Ths On Both Sides.
Features
- Every woodworker should own a few precision machinist rulers as they will improve the accuracy of his/her work. Traditionally, the most common graduation markings used by woodworkers are 4R, or 1/8ths and 1/16ths on one side and 1/32nds and 1/64ths on the reverse. The fact is most woodworkers never use the finer 1/32nd and 1/64th markings as they are hard to read, too precise for most tasks, and just plain confusing, e.g., just what does 51/64th or 19/32nds really mean? So, we had rulers made under our Benchmark Tools brand that included the most commonly used 1/8th and 1/16th graduation marks on both sides
- Our rules are made from Japanese rust-resistant stainless steel that has been tempered creating a ruler that can flex if needed and snap back straight. The edges and ends have been ground parallel, straight, smooth and square. Graduations are produced via a photoengraving process creating very consistent and accurate markings with uniform line widths. Once etched, graduations are black filled for maximal readability. Graduations are etched and not printed so will not wear off with prolonged use. Graduations conform to strict international EEC 1 Accuracy Standards, i.e. +/- 0.2mm at 20 C for 1000mm ruler. Markings feature quick-reading 1/8ths and 1/16ths on both sides
- Rule is finished with a satin chrome finish that minimizes scratches and corrosion and increases readability by achieving a brighter, non-glare finish that enhances the contrast between the black graduation lines and the surface of the rule.
- Specifications: 6 long x 3/4 wide x 0.040 thick. Rule comes with end graduation marks on both ends of the rule.
- Each rule comes in vinyl storage pouch. These are well made rules and will provide years of reliable service in any shop.
- See more on Amazon...
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
Dimensions: 0.04 x 6.00 x 0.75 inches
See On Amazon #3
Made in USA PEC 6" Rigid Stainless Steel 4R Machinist Engineer Ruler / Rule 1/64, 1/32, 1/8, 1/16
Asin: B00AG715PG
Ean: 0698895037104, 0616909150106, 5899405932550, 7241871127127, 7336117930958, 0045635606227, 7131405377237, 7147905878365
UPC: 616909150106, 698895037104, 045635606227
It Has A Brushed Finish And Is Precision Photo Etched And Then Black Filled For Easy Readability..
Rule Is .750” Wide And .035” Thick.Both Long Edges Are Ground Flat And Straight..
The 4R Graduation Shows 32Nds And 64Ths On One Side And 8Ths And 16Ths On The Reverse..
It Is Made From The Finest Stainless Steel Available And Is Hardened And Tempered..
Features
- This rule is made in the USA by Products Engineering Company (PEC Tools), a premier US tool manufacturer.
- It is made from the finest stainless steel available and is hardened and tempered.
- It has a brushed finish and is precision photo etched and then black filled for easy readability.
- The 4R graduation shows 32nds and 64ths on one side and 8ths and 16ths on the reverse.
- Rule is .750 wide and .035 thick.Both long edges are ground flat and straight.
- See more on Amazon...
Brand: PEC Tools | Manufacturer: Products Engineering Corporation PEC Tools
Weight: 0.02 Pounds
See On Amazon #4
Taytools 106391 4 Piece Set 6 x 6 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVSTKCJ | Model: 106391 | PartNumber: 106391
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 6-Inch X 6-Inch. Leg Thickness Is 0.950 Inch And Leg Width Is 0.1.380 Inch.
.
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 6-inch x 6-inch. Leg thickness is 0.950 inch and leg width is 0.1.380 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.95 x 6.00 x 6.00 Inches
See On Amazon #5
Taytools 106392 4 Piece Set 8 x 8 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVWZ2N4 | Model: 106392 | PartNumber: 106392
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 8-Inch X 8-Inch. Leg Thickness Is 1.130 Inch And Leg Width Is 0.1.570 Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 8-inch x 8-inch. Leg thickness is 1.130 inch and leg width is 0.1.570 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 1.13 x 8.00 x 8.00 Inches
See On Amazon #6
Taytools 776629 4 Piece Set of Solid Machinist Squares, 2-3/4, 3-3/4 , 4-3/4 and 6-3/4 inch Accurate to 0.001
Asin: B092RLD3WP
Each Square Is Made From 2 Pieces Of Tool Steel. The Bases And Blades Are Riveted Together With 2 Pins Producing A Strong And Invisible Joint..
Each Square Guaranteed To Be Accurate To 0.001" Over The Length Of The Blade. Comes In A Hinged Plastic Case..
All Faces And Edges Are Ground And Lapped For Straightness And Parallelism..
The Set Include The Following Squares: 2-3/4 Inch, 3-3/4 Inch, 4-3/4 Inch And 6-3/4 Inch..
Features
- This is a 4-piece set of precision machinist squares and are perfect for the professional machinist, meticulous wood worker, or DIY perfectionist
- The set include the following squares: 2-3/4 inch, 3-3/4 inch, 4-3/4 inch and 6-3/4 inch.
- Each square is made from 2 pieces of tool steel. The bases and blades are riveted together with 2 pins producing a strong and invisible joint.
- All faces and edges are ground and lapped for straightness and parallelism.
- Each square guaranteed to be accurate to 0.001 over the length of the blade. Comes in a hinged plastic case.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #7
Taytools 6-3/4 inch Precision 2 Piece Machinist Squares: Accurate to 0.001 Over The Full Length of The Blade. (6.75")
Asin: B0C1TD5K3F | Model: 777152 | PartNumber: 777152
All Faces And Edges Are Ground And Lapped For Straightness And Parallelism..
Specifications: 6.75 Inch Square – 6.75 Inches X 3.75 Inches.
Each Square Is Guaranteed To Be Accurate To +/- 0.001 Of An Inch (One Thousandth Of An Inch) Over The Length Of The Blade..
Each Square Is Made From 2 Pieces Of Tool Steel. The Bases And Blades Are Riveted Together With 2 Tapered Pins Producing A Strong And Invisible Joint..
Features
- These squares are perfect for the professional machinist, meticulous wood worker, or DIY perfectionist.
- Each square is made from 2 pieces of tool steel. The bases and blades are riveted together with 2 tapered pins producing a strong and invisible joint.
- All faces and edges are ground and lapped for straightness and parallelism.
- Each square is guaranteed to be accurate to +/- 0.001 of an inch (one thousandth of an inch) over the length of the blade.
- Specifications: 6.75 inch square 6.75 inches x 3.75 inches
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.43 x 6.75 x 3.75 inches
See On Amazon #8
Taytools 469256 6 Inch Depth Gauge Protractor Rectangular Stainless Steel Brass Knob
Asin: B07DGZNFVR | Model: 469256 | PartNumber: 469256 | Ean: 0700667469256 | UPC: 700667469256
Depth Ruler Made From Stainless Steel And Is .020 Inch Wide And 0.050 Inch Thick And Graduated In 1/64Ths On One Side And Mm And .5Mm On The Reverse..
Locking Knob Is Solid Brass..
Head Sizes Is 1-79 X 3-1/8 Inches And .085 Inch Thick..
Protractor Measures From 0-180 Degrees..
Features
- This square head protractor will double as a depth gauge.
- Protractor measures from 0-180 degrees.
- Depth ruler made from stainless steel and is .020 inch wide and 0.050 inch thick and graduated in 1/64ths on one side and mm and .5mm on the reverse.
- Head sizes is 1-79 x 3-1/8 inches and .085 inch thick.
- Locking knob is solid brass.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Weight: 0.24 Pounds
See On Amazon #9
General Tools 678MED Precision 6-Inch Rigid Steel Rule
Asin: B0031F052O | Model: 678MED | PartNumber: 678MED | Ean: 0038728321145 | UPC: 038728321145
Durable: Polished Stainless-Steel Finish..
Dimensions: 6-Inches X 3/4" (150Mm X 19Mm)..
General Tools: We're A Recognized Leader In Designing And Developing Specialized Precision Tools Dedicated To Delivering Exceptional Customer Service. We Encourage Artisans And Diyers To Work Smarter, Measure Better, And Repair More Productively..
Etched Graduations: Ultra Fine Black Graduations For Easy Reading And Long Life..
Metric: Also Measures Every .5, 10, 20, 50, 100Mm..
Features
- 4R GRADUATIONS: Measures 8ths, 16ths, 32nds, 64ths.
- METRIC: Also measures every .5, 10, 20, 50, 100mm.
- DURABLE: Polished Stainless-steel finish.
- ETCHED GRADUATIONS: Ultra fine black graduations for easy reading and long life.
- DIMENSIONS: 6-inches x 3/4 (150mm x 19mm).
- GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively.
- See more on Amazon...
Brand: General Tools | Manufacturer: General Tools
Dimensions: 6.00 x 0.03 x 0.75 Inches | Weight: 0.02 Pounds
See On Amazon
Looking For Something Else?
Search