Aluminum Throttle Bellcrank Linkage Purple For HPI Savage 25 SS 4.6 85051 85058
Asin: B06ZYGXVK7 | Ean: 6907224812751
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
What You See In The Main Picture Is What You Will Receive..
Aluminum More Durable And Cool.
Original Number:85051 85058.
Features
- It's upgrade part
- Original Number:85051 85058
- Please check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and cool
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
See On Amazon Similar To Aluminum Throttle Bellcrank Linkage Purple
#1
YANGCAN Compatible with 2-Pack Bell Crank Throttle Shaft Linkage Bushings for Cummins 12V 1989-1998 Brass Upgrade
Asin: B09M8JBPQM
When There Is Excessive Wear On The Shaft Or Housing, These Bushings Won't Be A Lot Of Help Because They Will Fit Loose. If This Is Your Case We Recommend To Replace The Shaft And Bracket. Thoroughly Clean The Shaft And Housing From All Rust, Corrosion And Paint. If You Press Them In To A Crappy Housing, It Will Crush The Bushing And Make It Bind On The Shaft. Lube With Regular Grease..
High Quality & Easy Installation.
Please Check Whether This Item Can Fit On Your Car Before Purchasing.
These Will Fit The First Gen And Second Gen Bell Crank Throttle Linkage. On The Second Gen P-Pump Motors, When The Original Plastic Bushings Wear Out, It Allows The Shaft To Wobble In The Tps. A .1 Volt Change In The Tps Changes The Shift Points By About 10 Mph. It Makes The Trans Shift Wrong Which Will Wear It Out. Also, When The Shaft Wobbles, It Will Destroy The Tps (Throttle Position Sensor)..
Features
- Compatible with 1989-1998 Cummins 12V
- These will fit the first gen and second gen bell crank throttle linkage. On the second gen P-pump motors, when the original plastic bushings wear out, it allows the shaft to wobble in the TPS. A .1 Volt change in the TPS changes the shift points by about 10 MPH. It makes the trans shift wrong which will wear it out. Also, when the shaft wobbles, it will destroy the TPS (Throttle Position Sensor).
- When there is excessive wear on the shaft or housing, these bushings won't be a lot of help because they will fit loose. If this is your case we recommend to replace the shaft and bracket. Thoroughly clean the shaft and housing from all rust, corrosion and paint. If you press them in to a crappy housing, it will crush the bushing and make it bind on the shaft. Lube with regular grease.
- Please check whether this item can fit on your car before purchasing
- High Quality & Easy Installation
- See more on Amazon...
Brand: YANGCAN | Manufacturer: YANGCAN AUTO
See On Amazon #2
Internal Throttle KIT with Metal Sleeve for use with Rubber Grips on 1" Handlebars - Needle and Ball Bearing Construction with Spring-Assisted Return - Custom Harley Bobber Chopper
Asin: B07FNXD979 | Model: IINTRNL_THRTL_WTH_SLV | PartNumber: IINTRNL_THRTL_WTH_SLV
Comes With Detailed Installation Instructions. Basic Hand Tools Required For Proper Installation. (No Welding Required) Custom Application For Any Bike With 1" Handlebars. The Internal Portion Of The Throttle Slides Into The Handlebars Just Short Of 2-1/2" (Roughly 2-15/16") Install Note: You Will Most Likely Need A Longer Cable To Use With This Internal Throttle Kit..
Simply Slide The Sleeve Over The Throttle, Tighten The Set-Screws And Install Your Favorite Set Of Rubber Grips And You're Good To Go! Choose From Our Wide Variety Of Grips Or Use Your Own With This Kit!.
Throttle Sleeve: Cnc Machined From 6061 Aluminum. The Throttle Sleeve Surface Is Knurled To Properly Secure Your Grips. The Sleeve Also Comes With Stainless Steel Set-Screws To Secure The Sleeve To Your Internal Throttle..
Internal Throttle: The Unique Needle And Ball Bearing Construction Creates An Extremely Smooth Operation Over Competitors Internal Throttles. Throttle Also Features A Spring-Assisted Return For Added Safety..
Features
- This KIT includes the Internal Throttle and Metal Throttle Sleeve that will allow you to use Rubber Grips! Does NOT come with grips. MADE IN THE USA
- Internal Throttle: The unique Needle and Ball Bearing Construction creates an extremely smooth operation over competitors internal throttles. Throttle also features a spring-assisted return for added safety.
- Comes with detailed installation instructions. Basic Hand Tools required for proper installation. (No Welding Required) Custom Application for any bike with 1 Handlebars. The internal portion of the throttle slides into the handlebars just short of 2-1/2 (Roughly 2-15/16) INSTALL NOTE: You will most likely need a longer cable to use with this internal throttle kit.
- Throttle Sleeve: CNC machined from 6061 Aluminum. The throttle sleeve surface is knurled to properly secure your grips. The sleeve also comes with stainless steel set-screws to secure the sleeve to your internal throttle.
- Simply slide the sleeve over the throttle, tighten the set-screws and install your favorite set of rubber grips and you're good to go! Choose from our wide variety of grips or use your own with this kit!
- See more on Amazon...
Brand: Billet Proof Designs | Manufacturer: Billet Proof Designs
Dimensions: 1.00 x 7.00 x 1.00 inches
See On Amazon #3
Joes Racing Products 26005 Aluminum Throttle Bell Crank
Asin: B00TO656C8 | Model: 26005 | PartNumber: 26005 | Ean: 0615339121458, 0013010003312 | UPC: 615339121458, 013010003312
Product Type:Auto Part.
Item Package Dimension:5.5 " L X 3.9 " W X 0.3 "H.
Item Package Quantity:1.
Features
- Country Of Origin: United States
- Item Package Quantity:1
- Product Type:Auto Part
- Item Package Dimension:5.5 L X 3.9 W X 0.3 h
- See more on Amazon...
First Available: 11/19/2016
Brand: Joes Racing | Manufacturer: Joes Racing Products
Dimensions: 0.30 x 5.50 x 3.90 inches | Weight: 0.08 Pounds
See On Amazon #4
Universal Throttle Linkage Bell Crank Kit
Asin: B07B8WX6T7
.13" Material Thickness.
12 Mounting Holes For Various Positioning.
All Hardware Is Included In The Kit.
Zinc-Plated Steel Construction.
Features
- Universal applications
- Zinc-plated steel construction
- .13 material thickness
- All hardware is included in the kit
- 12 mounting holes for various positioning
- See more on Amazon...
Brand: Speedway Motors | Manufacturer: Speedway Motors
Dimensions: 2.50 x 3.80 x 3.80 inches | Weight: 1.00 Pounds
See On Amazon #5
Bryke Racing Throttle Linkage Rod Aluminum Rod 24" Long with 1/4"-28 LH & RH Threads
Asin: B0BH78MKM9 | Model: 520-001 | PartNumber: 520-001 | Ean: 0766544738105 | UPC: 766544738105
1/4"-28 Thread.
Tapped With Both Left Hand And Right Hand Threads.
Aluminum Rod.
Features
- Throttle Rod 24"
- Aluminum Rod
- 1/4-28 Thread
- Tapped with both Left Hand and Right Hand threads
- See more on Amazon...
Brand: Bryke Racing | Manufacturer: Bryke Racing
Dimensions: 24.00 x 24.00 x 24.00 inches | Weight: 0.29 Pounds
See On Amazon #6
Allstar Throttle Bell Crank
Asin: B003TPKSP0 | Model: ALL54150 | PartNumber: ALL54150 | Ean: 0848238027679 | UPC: 848238027679
The Package Width Is 8.636 Centimeters.
Package Weight : 0.55 Pounds.
The Package Height Is 0.508 Centimeters.
Features
- The package length is 7.874 centimeters
- The package height is 0.508 centimeters
- The package width is 8.636 centimeters
- Package Weight : 0.55 pounds
- See more on Amazon...
Brand: Allstar Performance | Manufacturer: Allstar Performance
Dimensions: 0.40 x 6.90 x 4.00 inches | Weight: 0.11 Pounds
Warranty: 90 day
See On Amazon #7
Aluminum Bell Crank Throttle Rod Kit
Asin: B075NLR7VH
6", 12", And 16" Rods Included In The Kit.
3/16" (10-32) Rh/Lh Thread Pitch.
Six Female Rod Ends And Three Linkage Rods.
Bell Crank Included.
Features
- Lightweight, durable aluminum construction
- Bell crank included
- 6, 12, and 16 rods included in the kit
- Six female rod ends and three linkage rods
- 3/16 (10-32) RH/LH thread pitch
- See more on Amazon...
Brand: Speedway Motors | Manufacturer: Speedway Motors
Dimensions: 1.00 x 16.00 x 4.00 inches | Weight: 1.00 Pounds
See On Amazon #8
BBR Tuning Complete Billet Aluminum Throttle Grip Handle and Kill Switch Set - Purple
Asin: B07CGN4MCN | Ean: 0799789985386 | UPC: 799789985386
Easy Installation: Start By Removing The Existing Throttle Assembly From Your Handlebars. Install Your Stock Throttle Cable In To Your New Kill Switch And Throttle Handle. Fasten The Kill Switch And Throttle Assembly On To Your Handlebars, And You're Ready To Ride.
Package Includes: Metallic Stationary (Left) Handlebar Grip; Metallic Throttle (Right) Handlebar Grip; Kill Switch; Grip Color: Yellow.
Universal Fit: Fits Standard 7/8” Diameter Handlebars; Compatible With 2-Stroke 49Cc And 66/80Cc Bicycle Engine Kits; Compatible With 4-Stroke 38Cc And 49Cc Bicycle Engine Kits.
Improved Feel: From 2-Strokes Like The Flying Horse Racing Series To 4-Strokes Like The 49Cc Flying Horse 5G Engine Kit Or The 38Cc Flying Horse Lock-N-Load Friction Drive, These Grips Not Only Look Good, They Feel Good, Too.
Features
- MAKE YOUR BIKE LOOK GREAT: Tired of those boring old throttle grips taking up room on your handlebars? Get a cleaner, flashier look for your 2-stroke or 4-stroke motorized bike with the BBR Tuning Metallic Throttle Grip Handle and Kill Switch Set
- IMPROVED FEEL: From 2-strokes like the Flying Horse Racing Series to 4-strokes like the 49cc Flying Horse 5G engine kit or the 38cc Flying Horse Lock-n-Load Friction Drive, these grips not only look good, they feel good, too
- EASY INSTALLATION: Start by removing the existing throttle assembly from your handlebars. Install your stock throttle cable in to your new kill switch and throttle handle. Fasten the kill switch and throttle assembly on to your handlebars, and you're ready to ride
- UNIVERSAL FIT: Fits standard 7/8 diameter handlebars; Compatible with 2-Stroke 49cc and 66/80cc bicycle engine kits; Compatible with 4-Stroke 38cc and 49cc bicycle engine kits
- PACKAGE INCLUDES: Metallic Stationary (left) Handlebar Grip; Metallic Throttle (right) Handlebar Grip; Kill switch; Grip Color: Yellow
- See more on Amazon...
Brand: BBR Tuning | Manufacturer: BBR Tuning
Weight: 0.60 Pounds
See On Amazon #9
JOES RACING PRODUCTS - 33700-B - Throttle Cross Shaft Bell Crank Assembly BLK
Asin: B0BLSCK2GD | Model: 33700-B | PartNumber: 33700-B | Ean: 0758891999179 | UPC: 758891999179
Brand: Joes Racing
Dimensions: 4.40 x 8.40 x 4.40 inches
See On Amazon #10
25-1/2 Inch Aluminum Throttle Linkage, 1/4 Inch Rod Ends, Purple
Asin: B079Q9D3RP
They Have A Right Hand Thread On One End And Left Hand Thread On The Other.
Includes The Necessary Steel Rod Ends And Steel Jam Nuts.
Rod Is Solid Aluminum And If You Cut It Shorter You Will Need To Drill And Tap New Threads.
Made From Lightweight Aluminum And Is Available In Several Colors And Finishes To Better Match Your Needs.
Features
- The kits are 25-1/2" long with 1/4" rod ends
- Made from lightweight aluminum and is available in several colors and finishes to better match your needs
- They have a right hand thread on one end and left hand thread on the other
- Rod is solid aluminum and if you cut it shorter you will need to drill and tap new threads
- Includes the necessary steel rod ends and steel jam nuts
- See more on Amazon...
Brand: Speedway Motors | Manufacturer: Speedway Motors
Dimensions: 1.00 x 26.00 x 1.00 inches | Weight: 1.00 Pounds
See On Amazon #11
Aluminum Throttle Bellcrank Linkage Silver for HPI Savage 25 SS 4.6 85051 85058
Asin: B06ZZ2GR4V | Ean: 6907224812744
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
What You See In The Main Picture Is What You Will Receive..
Aluminum More Durable And Cool.
Original Number:85051 85058.
Features
- It's upgrade part
- Original Number:85051 85058
- Please check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and cool
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.05 Pounds
See On Amazon #12
for HPI Savage 25 SS 4.6 85051 85058 Aluminum Throttle Bellcrank Linkage Purple
Asin: B09JVFSC3H | Ean: 0747992979609 | UPC: 747992979609
Brand: generic | Manufacturer: GHLRacing
See On Amazon #13
Aluminum Bell Crank with Bearing Center, Purple
Asin: B01N9VS2NB
Anodized Aluminum Construction.
1/4" Material Thickness.
3/16" (10-32) Thread Pitch.
For Midget Or Sprint Cars.
Features
- Four colors to choose from
- For Midget or Sprint Cars
- Anodized aluminum construction
- 3/16 (10-32) Thread pitch
- 1/4 material thickness
- See more on Amazon...
Brand: Speedway Motors | Manufacturer: Speedway Motors
Dimensions: 1.00 x 4.00 x 3.00 inches | Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search