RECI 100W CO2 Laser Tube W4/S4 (Peak 130W) 1400mm for Laser Engraving Cutting(US Stock)
Asin: B0716SB3V8 | Model: LT-W4 | PartNumber: LT-W4 | Ean: 0671875166001 | UPC: 671875166001
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The W Series (W1,W2,W4,W6,W8 ) Can Replac The Old Model S Series (S1,S2,S4,S6 S8) Tube Well..
We Insure The Tube When Ship, If There Is Any Broken In Transport, We Will Send The New One Free Again Depend On The Broken Photos And Damage Report From Courier..
The W Series Tubes Are Better To Work With Compatible Power Supply. Our Suggestion Is That W1 Works With Dy10, W2 Works With Dy13; W4/W6/W8 Works With Dy20..
The Service Life Is About 10000 Hours And With A Power Range Of 100W-130W..
Features
- CE and FDA cetification can be avaiable.
- The service life is about 10000 hours and with a power range of 100W-130W.
- The W series (W1,W2,W4,W6,W8 ) can replac the old model S series (S1,S2,S4,S6 S8) tube well.
- The W series tubes are better to work with compatible power supply. Our suggestion is that W1 works with DY10, W2 works with DY13; W4/W6/W8 works with DY20.
- We insure the tube when ship, if there is any broken in transport, we will send the new one free again depend on the broken photos and damage report from courier.
- See more on Amazon...
Brand: MCWlaser | Manufacturer: Shanghai Top Nine Industrial Co.,Ltd
See On Amazon Similar To RECI 100W CO2 Laser Tube
#1
Cloudray 60W Laser Tube 1000mm Dia.50mm,CO2 Laser Tube 50W,Cable Preconnected with Coating,60 Watt C02 Laser Tube With Metal Head CR50 50-70W)
Asin: B087G3QH9V | Model: CR50 | PartNumber: CR50 | Ean: 0053554513120 | UPC: 053554513120
【Quality Support】Cloudray Co2 Laser Tube Are Coated With Nano Gold Catalyst ,The Output Laser Is The Tem00 Mode, Which Has High Quality Beam Spot Concentration, High Energy Density As Well As Good And Stable Spot, Making Laser Machine With Better Performance.Apply Unique Glass Metal Sealing Technology, And Ensure A Longer Support Life Of The Co2 Laser Tube..
【Installed Easily】 For Your Convenience, Cloudray Tube Have Been Pre-Connected The High Voltage End And Low Voltage Port, Along With The High Voltage Connector, Simplifying The Installation Process Of Your 60 Watt Laser Tube.If You Require Any Assistance Of C02 Laser Tube , Please Don't Hesitate To Reach Out To Us ..
【Team Support】We Are Committed To Providing Superior Support . If Any Issues Arise Within 4 Months Of Receiving The Laser Tube (Excluding Man-Made Damage), Please Provide Us With The Laser Tube Serial Number And Proof Of The Problem Via Photo Or Video. Upon Verification, We Will Promptly Send You A New Cloudray Tube..
Features
- Powerful Laser Tube CR50 60w laser tube max 70W , Length1000mm Outer Dia.50mm.Before ordering, pls confirm the Diameter and Length of the co2 tube,great replacement for the same power or same length 60w co2 laser tube (Pls make sure your machine has enough installation space, all spaces should be slightly larger than laser tube's size).
- Team Support We are committed to providing superior support . If any issues arise within 4 months of receiving the laser tube (excluding man-made damage), please provide us with the laser tube serial number and proof of the problem via photo or video. Upon verification, we will promptly send you a new cloudray tube.
- Quality Support Cloudray CO2 laser tube are coated with nano gold catalyst ,the output laser is the TEM00 mode, which has high quality beam spot concentration, high energy density as well as good and stable spot, making laser machine with better performance.Apply unique glass metal sealing technology, and ensure a longer support life of the CO2 laser tube.
- Installed Easily For your convenience, cloudray tube have been pre-connected the high voltage end and low voltage port, along with the high voltage connector, simplifying the installation process of your 60 watt laser tube.If you require any assistance of c02 laser tube , please don't hesitate to reach out to us .
- See more on Amazon...
Brand: Cloudray | Manufacturer: Cloudray
Weight: 33.06 pounds
See On Amazon #2
Cloudray 100W Co2 Laser Power Supply 220V PSU DY13 for RECI Z2/W2/S2 Laser Cutter Co2 Laser Engraver Tube
Asin: B07BWFN7GW | Model: DY13 | PartNumber: DY13 | Ean: 0669819727838 | UPC: 669819727838
Extending The Lifespan Of Your Laser Tubes, This Co2 Laser Power Supply Alongside The 100W Laser Power Supply Is Geared To Promote Longevity, Securing Your Investment And Intensifying Productivity..
Completing The Package, The Laser Power Supply 100W Includes Ttl Signal Indication, Water-Through Signal Indication, And Laser Output Indication. As A Top-Notch Replacement For Your Co2 Laser Tube And Co2 Laser Engraver /Cutter / Marker, This Mcw Co2 Laser Power Supply Asserts Unmatched Quality..
Embracing User-Friendliness, Our Cloudray Power Supply Promises Ease In Laser Controls, Establishing Effortless Start And Stop Mechanisms Via Ttl Level. The Right Choice For The C02 Laser Power Supply, For Reci Laser Tube, Reinventing Your Usage Experience..
Exemplary In Responsiveness And Effect, The Laser Power Supply Psu Revitalizes Your Operations, Boosting Cutting Power For Broad And Dynamic Applications. We Instigate The Synergy Between Dependable Power Supply 100W Laser Co2 And Seamless Performance..
Features
- Experience precision with Cloudray Power Supply, a specialist-designed power solution for Reci W2/S2 90-100W laser tubes. As a reliable and sufficient 100w power supply laser, it ensures optimal function in 100w co2 laser tube environments, presenting efficient operations.
- Exemplary in responsiveness and effect, the laser power supply PSU revitalizes your operations, boosting cutting power for broad and dynamic applications. We instigate the synergy between dependable power supply 100w laser co2 and seamless performance.
- Extending the lifespan of your laser tubes, this co2 laser power supply alongside the 100w laser power supply is geared to promote longevity, securing your investment and intensifying productivity.
- Embracing user-friendliness, our Cloudray Power Supply promises ease in laser controls, establishing effortless start and stop mechanisms via TTL level. The right choice for the c02 laser power supply, for RECI Laser tube, reinventing your usage experience.
- Completing the package, the laser power supply 100w includes TTL signal indication, water-through signal indication, and laser output indication. As a top-notch replacement for your CO2 Laser Tube and CO2 Laser Engraver /Cutter / Marker, this mcw co2 laser power supply asserts unmatched quality.
- See more on Amazon...
Brand: Cloudray | Manufacturer: Cloudray
Dimensions: 7.09 x 13.78 x 9.84 inches | Weight: 6.83 pounds
See On Amazon #3
TEN-HIGH 50W CO2 Laser Tube 800mm D50mm, Wires Preconnected with Coating, for Laser Cutter Laser Engraving Cutting Machine
Asin: B07FBJJ98Q | Model: TH-50WCO2LT800-N | PartNumber: TH-50WCO2LT800-N
【Quality Assurance】Each Tube Is Tested Before Shipping And We Will Provide A Safe Packaging. If Any Problem After Receives The Tube, Do Let Us Know. We Are Willing To Provide The Best Services And Will Provide 3 Months Warranty (Except Man-Made Damage)..
【Application】This Co2 Laser Tube Is Mainly Used For Laser Cutter Or Laser Engraving Machine, Which Can Carve And Cut Acrylic, Cloth, Leather, Bamboo, Wood, Engraving, Etc..
【Advantages】All Of Our Tubes Are Coated With Nano Gold Catalyst, Compared To Non-Coating One, Its Power Increase About 7-20W. Uses Temoo Mode For Output, High Spot Concentration, Higher Energy And More Stable Power. Apply Unique Glass Metal Sealing Technology, And Ensure A Longer Service Life..
【Wires Pre-Connected】For Easy Installation, The High Voltage End And Low Voltage Port Have Been Connected In Advance. If Any Support Needed When Installing, Feel Free To Contact Us..
Features
- Power: 50W; Length: 800mm; Diameter: 50mm; Item includes: 1 x tube.
- Wires Pre-Connected For easy installation, the high voltage end and low voltage port have been connected in advance. If any support needed when installing, feel free to contact us.
- Quality Assurance Each tube is tested before shipping and we will provide a safe packaging. If any problem after receives the tube, do let us know. We are willing to provide the best services and will provide 3 months warranty (except man-made damage).
- Advantages All of our tubes are coated with nano gold catalyst, compared to non-coating one, its power increase about 7-20W. Uses TEMOO mode for output, high spot concentration, higher energy and more stable power. Apply unique glass metal sealing technology, and ensure a longer service life.
- Application This CO2 laser tube is mainly used for laser cutter or laser engraving machine, which can carve and cut acrylic, cloth, leather, bamboo, wood, engraving, etc.
- See more on Amazon...
Brand: TEN-HIGH | Manufacturer: TEN-HIGH
Warranty: We will provide 3 months warranty (except man-made damage).
See On Amazon #4
RECI 100W CO2 Laser Tube W4S4 (Peak 130W) 1400mm Duty Free for Laser Engraving Cutting Shipping from US, W4(S4) 100-130W (US Stock.)
Asin: B094MGYHRY | Model: RECI-W4 | PartNumber: RECI-W4 | Ean: 0715834937148 | UPC: 715834937148
We Ensure The Tube When Ship, If There Is Any Broken In Transport, We Will Send The New One Again Depend On The Broken Photos And Damage Report From Courier..
It's Better To Work With Compatible Power Supply. Our Suggestion Is That W1 Works With Dy10, W2 Works With Dy13, W4/W6/W8 Works With Dy20..
The W Series (W1, W2, W4, W6, W8 ) Can Replace The Old Model S Series (S1, S2, S4, S6, S8) Tube Well..
Features
- The service life of tube is about 10000 hours.
- The W series (W1, W2, W4, W6, W8 ) can replace the old model S series (S1, S2, S4, S6, S8) tube well.
- We ensure the tube when ship, if there is any broken in transport, we will send the new one again depend on the broken photos and damage report from courier.
- It's better to work with compatible power supply. Our suggestion is that W1 works with DY10, W2 works with DY13, W4/W6/W8 works with DY20.
- See more on Amazon...
Brand: Reci | Manufacturer: Reci
See On Amazon #5
Cloudray RECI CO2 Laser Tube W2 CO2 Glass Laser Tube, 90W 100W Length 1200mm S2 Z2 Dia 80mm For CO2 Laser Engraver Cutting Machine
Asin: B08GLMRR1K | Model: W2:90-100w Dia:80mm L:1240mm | PartNumber: W2:90-100w Dia:80mm L:1240mm | Ean: 0669819721782, 0727277172109 | UPC: 669819721782, 727277172109
Long Lifespan: Enjoy A Lifespan Of 10000 Hours, Ensuring Uninterrupted Operations And Minimal Downtime..
W Series Tube Comes With A Removable Laser Lens Cover That You Can Remove And Clean From Time To Time. The Actual Tube's Output Lens Is Not Exposed To The Enviroment..
Each Tube Is Tested Before Shipping And We Will Provide A Safe Packaging. If It Is Damaged During Transportation, Please Find Us Here To Provide A New Replacement.
With A Power Range Of 80W - 100W, This Co2 Laser Tube Delivers Better Performance, Stability, And Higher Efficiency For All Your Industrial Needs..
Features
- W2 RECI Laser Tube - Rated Power 90-100W,Length: 1240mm, Diameter: 80mm ;Recommended current 25mAUpgrade your engraving technology by using this high performance laser tube.
- With a power range of 80W - 100W, this CO2 laser tube delivers better performance, stability, and higher efficiency for all your industrial needs.
- Long Lifespan: Enjoy a lifespan of 10000 hours, ensuring uninterrupted operations and minimal downtime.
- Each tube is tested before shipping and we will provide a safe packaging. If it is damaged during transportation, please find us here to provide a new replacement
- W Series tube comes with a removable laser lens cover that You can remove and clean from time to time. The actual tube's output lens is not exposed to the enviroment.
- See more on Amazon...
Brand: Cloudray | Manufacturer: Cloudray
Dimensions: 11.42 x 55.12 x 10.63 Inches | Weight: 8.00 Kilograms
Warranty: 18 Months Warranty Shipping Free
See On Amazon #6
US Stock RECI CO2 Glass Laser Tube 90W Peak 100W 1200mm W2 S2 Z2 Dia 80mm for CO2 Laser Engraver Engraving Machine
Asin: B09C5TMT5Y | Model: W2 | PartNumber: W2 | Ean: 0727277175759 | UPC: 727277175759
Brand: Cloudray | Manufacturer: Cloudray
Warranty: Within 540 days from receipt
See On Amazon #7
MCWlaser 60W CO2 Laser Tube Glass Laser Tube with Length 1000mm Dia.55mm 6000hrs MTTF for 60-70W CO2 Laser Engraving and Cutting Machine
Asin: B088LZYPXF | Model: 60W 1000mm | PartNumber: 60W 1000mm | Ean: 0671875167015 | UPC: 671875167015
Long Lasting & Outstanding Performance: Mcwlaser Laser Tube Use High-Quality Boron Silicate Glass Material, Premium Ii-Vi Infrared Lens, Nano Gold Catalyst Coating And Full Of Catalyst In The Tube To Ensure The Longer Lifespan. Offer Superior Heat Dissipation, High Spot Concentration, High Energy Density As Well As Good And Stable Spot..
Note: Each Mcwlaser Laser Tube Is Tested Before Shipping And We Will Provide A Safe Packaging. Us Warehouse Stocks. It Is Recommended To Use A Laser Power Supply That Matches The Laser Tube..
Easy Install & Operation: The Positive And Negative Pole Of Laser Tube Have Been Welded And Sealed In Advance. The High And Low Voltage Port Have Been Connected By The High Voltage Connector. It Can Simplify The Installation Process And Save Your Time..
Mcwlase Service: Customer Satisfaction Is Our Eternal Pursuit. We Provide 6 Months Guarantee Period For M60 60W Laser Tube (Exclude The Man-Made Damage). If There Are Any Issues With The Laser Tube, Please Contact Our Customer Service To Replace The Defective One(Including Transportation Damage) Via Amazon. Mcwlaser Engineers Will Also Provide Professional Support And Advice At Any Time..
Features
- Powerful Laser Tube: M60 laser tube, rated power 60W and peak power 70W. Outer diameter is 55mm and length is 1000mm. TEM00 mode. It is suitable for replacing the same power or length laser tube. Please make sure the tube fits your co2 laser engraving or cutting machine before ordering it.
- MCWlase Service: Customer satisfaction is our eternal pursuit. We provide 6 months Guarantee period for M60 60W laser tube (exclude the man-made damage). If there are any issues with the laser tube, please contact our customer service to replace the defective one(including transportation damage) via Amazon. MCWlaser engineers will also provide professional support and advice at any time.
- Long Lasting & Outstanding Performance: MCWlaser laser tube use High-quality boron silicate glass material, premium II-VI infrared lens, nano gold catalyst coating and full of catalyst in the tube to ensure the longer lifespan. Offer superior heat dissipation, high spot concentration, high energy density as well as good and stable spot.
- Easy Install & Operation: The positive and negative pole of laser tube have been welded and sealed in advance. The high and low voltage port have been connected by the high voltage connector. It can simplify the installation process and save your time.
- NOTE: Each MCWlaser laser tube is tested before shipping and we will provide a safe packaging. US warehouse stocks. It is recommended to use a laser power supply that matches the laser tube.
- See more on Amazon...
Brand: MCWlaser | Manufacturer: Shanghai Top Nine Industrial Co.,Ltd
Dimensions: 2.17 x 39.37 x 2.17 inches
See On Amazon #8
OMTech 80W CO2 Laser Tube for Laser Engraver & Cutter Machine, 1250mm 80mm Dia Laser Cutter Tube with Borosilicate Glass 10000hr MTTF, Laser Cutting Engraving Machine Replacement Tube for Wood Stone
Asin: B0BJKRJWJW | Model: RYGEL-LATST8001 | PartNumber: RYGEL-LATST8001
𝐒𝐀𝐅𝐄 𝐎𝐏𝐄𝐑𝐀𝐓𝐈𝐎𝐍: With Integrated Water Tubing And Ports, Our Laser Engraver Replacement Tube Allows For Efficient Cooling And Easy Connection To A Water Pump Or Water Chiller, While The Hermetically Sealed Borosilicate Glass Case Offers Exceptional Durability.
𝐒𝐀𝐓𝐈𝐒𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍 𝐆𝐔𝐀𝐑𝐀𝐍𝐓𝐄𝐄𝐃: Order This Laser Engraving Machine Tube From Omtech Today And Enjoy Fast Us-Based Shipping, Easy Hook-Up With Preinstalled Connection Wires And Ports, An Industry-Leading 16 Month Warranty, And Ever Helpful Customer Service And Tech Support.
𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍: This 1250 Mm (49.2") Long 80 Mm (3.1") Wide Laser Tube Operates At 22Kv And 5Ma For Engraving Acrylic, Cardboard, Ceramics, Fabric, Glass, Leather, Paper, Stone, Wood, And More.
𝐏𝐑𝐄𝐂𝐈𝐒𝐈𝐎𝐍 𝐌𝐀𝐒𝐓𝐄𝐑𝐏𝐈𝐄𝐂𝐄𝐒: Achieve Precise Cuts Using Your Laser Engraver And Cutter Machines With This Single-Mode Laser Cutter Tube, Which Features A 5 Mm Focused Beam Spot And An American Ii-Vi Infrared Lens For Reduced Light Attenuation.
Features
- : OMTech's 80W CO2 laser tube, with tempered borosilicate glass, premium II-VI infrared lens, gold catalyst coating, and 10,000 hour long service life, ensures powerful and stable laser beam for optimal performance
- : Achieve precise cuts using your laser engraver and cutter machines with this single-mode laser cutter tube, which features a 5 mm focused beam spot and an American II-VI infrared lens for reduced light attenuation
- : With integrated water tubing and ports, our laser engraver replacement tube allows for efficient cooling and easy connection to a water pump or water chiller, while the hermetically sealed borosilicate glass case offers exceptional durability
- : This 1250 mm (49.2) long 80 mm (3.1) wide laser tube operates at 22kV and 5mA for engraving acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood, and more
- : Order this laser engraving machine tube from OMTech today and enjoy fast US-based shipping, easy hook-up with preinstalled connection wires and ports, an industry-leading 16 month warranty, and ever helpful customer service and tech support
- See more on Amazon...
Brand: OMTech | Manufacturer: OMTech
Weight: 5.70 pounds
Warranty: 9 month warranty
See On Amazon #9
FAHKNS 45-55W CO2 Laser Tube Length 850mm Dia 50mm with Metal Head Laser Tube Replacement Tube for CO2 Laser Engraving
Asin: B0BPSMJJSG | Model: CR | PartNumber: CR
【High Quality Laser Tube】The Tube Body Of The Laser Tube Is Made Of High-Strength Borosilicate Glass. Full-Sealed Isolation Technology Can Effectively Block The Air And Prevent The Internal Gas From Diffusing. The Tube Body Is Hard And Not Easy To Deform, Has Strong Heat Resistance, And Will Not Break Under High Temperature..
【Wide Application】The Laser Tube Can Be Used With Most Of The Same Power Laser Tubes From Different Manufacturers, Higher Engraving Cutting Efficiency, More Stabilty. There Is An Ideal Choice For Laser Paper Cutting, Laser Cutting Cloth, Marble Marking..
【Warm Reminder】 After The Laser Tube Is Installed, Please Confirm The Direction Of The Water Flow, Whether There Are Air Bubbles Left, Whether The High And Low Voltage Wiring Is Correct, And The High Voltage Insulation Cover Has Been Installed And Insulated. Before Turning On The Laser Tube, Please Circulate The Water For Two Minutes..
【Great Performance】The Light Spot Is Fine And Penetrating, And It Will Not Deform After Long-Term Use. The Metal Head Ring Lock Is Not Easy To Crack, Ensuring Stable Structure, Laser Beam Quality And Output Power, Which Helps To Achieve Better Thermal Control While Working..
Features
- Main Parameter Power: 45-55W, L: 850mm Dia.50mm. Small size and fast cutting speed, higher power rate compared with the laser tube of similar length, and longer service time about 10,000 hours, suitable for laser marking, laser cutting and laser engraving.
- Great Performance The light spot is fine and penetrating, and it will not deform after long-term use. The metal head ring lock is not easy to crack, ensuring stable structure, laser beam quality and output power, which helps to achieve better thermal control while working.
- High Quality Laser Tube The tube body of the laser tube is made of high-strength borosilicate glass. Full-sealed isolation technology can effectively block the air and prevent the internal gas from diffusing. The tube body is hard and not easy to deform, has strong heat resistance, and will not break under high temperature.
- Warm Reminder After the laser tube is installed, please confirm the direction of the water flow, whether there are air bubbles left, whether the high and low voltage wiring is correct, and the high voltage insulation cover has been installed and insulated. Before turning on the laser tube, please circulate the water for two minutes.
- Wide Application The laser tube can be used with most of the same power laser tubes from different manufacturers, higher engraving cutting efficiency, more stabilty. There is an ideal choice for laser paper cutting, laser cutting cloth, marble marking.
- See more on Amazon...
Brand: FAHKNS | Manufacturer: FAHKAS
Dimensions: 8.27 x 48.43 x 9.06 inches
Warranty: Not Apply
See On Amazon #10
RECI W2 Laser Tube 90W 100W CO2 Laser Tube Length 1240mm Dia. 80mm with 10000h MTTF for CO2 Laser Engraving Cutting Machine
Asin: B085TDR2C2 | Model: LT-W2 | PartNumber: LT-W2 | Ean: 0671875165998 | UPC: 671875165998
Long Lifespan: The W2 Laser Tube Has A Long Lifespan Of Up To 10,000 Hours. Relatively Low Maintenance For Years Using. Each Tube Is Tested Before Shipping And We Will Provide A Safe Packaging. If It Is Damaged During Transportation Or Defective, Please Contact Us To Provide A New Replacement..
Wide Application: Reci Laser Tube Possesses Higer Power Than The Same Length Laser Tube. It Is Great For Engraving Acrylic, Cardboard, Ceramics, Fabric, Glass, Leather, Paper, Stone, Wood And Etc..
Tips: The Recommended Current For The Reci W2 Laser Tube Is 25Ma. The Long-Term Operating Current Should Be Controlled At 26Ma Or Below. The Maximum Operating Current Must Be Controlled At 28Ma Or Less..
The Reci W2 Laser Tube Has A Diameter Of 80Mm And A Length Of 1240Mm. Please Make Sure That The Laser Engraving Machine Has Enough Space To Accommodate The Laser Tube..
Features
- RECI W2 Laser Tube: 90W Max. 100W) CO2 laser tube with high quality, stability and performance. Higher efficiency for the laser engraving and cutting.
- The RECI W2 laser tube has a diameter of 80mm and a length of 1240mm. Please make sure that the laser engraving machine has enough space to accommodate the laser tube.
- Long lifespan: The W2 laser tube has a long lifespan of up to 10,000 hours. Relatively low maintenance for years using. Each tube is tested before shipping and we will provide a safe packaging. If it is damaged during transportation or defective, please contact us to provide a new replacement.
- Tips: The recommended current for the RECI W2 laser tube is 25mA. The long-term operating current should be controlled at 26mA or below. The maximum operating current must be controlled at 28mA or less.
- Wide Application: Reci laser tube possesses higer power than the same length laser tube. It is great for engraving acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood and etc.
- See more on Amazon...
Brand: MCWlaser | Manufacturer: Shanghai Top Nine Industrial Co.,Ltd
See On Amazon #11
TEN-HIGH CO2 Glass Laser Tube, Unique Upgraded Version Super Easy Installation Stable Power, for Laser Engraving Cutting Machine, Length 700mm Diameter 50mm 40W (Suitable for 40~45W)
Asin: B08V95GRN2 | Model: TH-D-40W-L700-D50-SJ-US | PartNumber: TH-D-40W-L700-D50-SJ-US
★ 【Positive Pole】For High-Voltage End, Adopts A New Tin Soldering Technology, Enlarges The Contact Area Of The Carbon Rods, Improves The Conductivity. Use Heat Shrinkable Tubing And High-Pressure Protective Sleeve, Effectively Solves Some Problems That Often Happen On Others Tubes, Such As Power Leakage, Static Electricity, Poor Contact, Etc. Also, The Two Layers Ensure Its Stronger Sealing, Higher Safety And Anti-Falling..
★ 【Splendid Coating & Stable Output】: This Co2 Laser Tube Adopt Inner Discharge Tube Coated With Nanogold Catalyst Technology, Power Is 10% Improved, And Service Life Is 20% Longer Than Ordinary Laser Tube. With Excellent Sealed-Off Technology, This Tube Can Efficiently Divide Air And Prevent Inside Gas Diffusion, Also Ensure The Stable Output Power And Great Spot Mode. It’S The Better Choice For Heavy Workload And Long Working Hours..
★ 【Negative Pole】We Adapt A New Unique Wiring Method, Easy To Connect And Disassemble. Metal Head, More Pretty, Hard To Crack Like The Glass Head, More Resistant To High Temperature. (*Before Using, Please Remove The Dust Protection Cover At The Left Side.).
★ 【Super Easy Installation】Compared With Other Tubes, The Biggest Advantage Of This Tube Is Super Easy Install. We Already Connect All The Wires In Advance, The High Voltage Protective Sleeve On Positive Pole, And The Terminals On Negative Pole. All You Need Is To Connect The High-Voltage End With Power Supply, And The Low-Voltage End With The Machine, Nothing Else..
Features
- Specification Length: 700mm, Diameter: 50mm, Power: 40W (suitable for power range of 40~45W). (*Please make sure your machine has enough installation space (diameter and length), all should be a little bigger than the laser tube's size.)
- Super Easy Installation Compared with other tubes, the biggest advantage of this tube is super easy install. We already connect all the wires in advance, the high voltage protective sleeve on positive pole, and the terminals on negative pole. All you need is to connect the high-voltage end with Power Supply, and the low-voltage end with the Machine, nothing else.
- Positive Pole For high-voltage end, adopts a new tin soldering technology, enlarges the contact area of the carbon rods, improves the conductivity. Use heat shrinkable tubing and high-pressure protective sleeve, effectively solves some problems that often happen on others tubes, such as power leakage, static electricity, poor contact, etc. Also, the two layers ensure its stronger sealing, higher safety and anti-falling.
- Negative Pole We adapt a new unique wiring method, Easy to connect and disassemble. Metal head, more pretty, hard to crack like the glass head, more resistant to high temperature. (*Before using, please remove the dust protection cover at the left side.)
- Splendid Coating & Stable Output : This CO2 laser tube adopt inner discharge tube coated with nanogold catalyst technology, power is 10% improved, and service life is 20% longer than ordinary laser tube. With excellent sealed-off technology, this tube can efficiently divide air and prevent inside gas diffusion, also ensure the stable output power and great spot mode. It s the better choice for heavy workload and long working hours.
- See more on Amazon...
Brand: TEN-HIGH | Manufacturer: TEN-HIGH
See On Amazon #12
Cloudray CO2 Power Supply 90W 100W 120W AC90-250V LCD Screen DIY Replace Part for CR90 RECI W2 GlassTube & CO2 Laser Engraver
Asin: B07BB8SW5V | Model: HY-Z100 | PartNumber: HY-Z100 | Ean: 0661021766070 | UPC: 661021766070
Universal: With Pfc Function, Ac90-250V Input Voltage Range, Globally Universal..
More Safety: With High Voltage Discharge Function, No Residual Voltage When Turning Off, Safer For User..
Open Circuit Protection: When The High Voltage End Is In Open Circuit Or Not Connected Well, The Power Supply Will Start Automatic Protection, To Prevent High Voltage Arc Effectively..
Make The Maintenance Much Easier: User Can Judge The Problem By Himself. Multi-Function Lcd Screen: One Lcd Screen Can Show The Information Of Two Power Supplies, Easy Use For Multi-Head Machine..
Features
- High intelligence: Built-in control, can communicate with motion controller,and it can communicate with max 32pcs power supplies by cascade connecting, then the controller panel can display working condition of power supply, very easy for user to monitor and judge the fault.
- Make the maintenance much easier: User can judge the problem by himself. Multi-function LCD screen: One LCD screen can show the information of two power supplies, easy use for multi-head machine.
- Universal: With PFC function, AC90-250V input voltage range, globally universal.
- Open circuit protection: When the high voltage end is in open circuit or not connected well, the power supply will start automatic protection, to prevent high voltage arc effectively.
- More safety: With high voltage discharge function, no residual voltage when turning off, safer for user.
- See more on Amazon...
Brand: Cloudray | Manufacturer: Cloudray
Dimensions: 7.09 x 14.57 x 9.84 inches | Weight: 7.28 pounds
See On Amazon #13
SenTECH 50W CO2 Glass Laser Tube 800mm Length Dia 50mm for Laser Engraving and Cutting Machine (Buy More Discounts)
Asin: B07RZ5KY7C | Ean: 0791307559604 | UPC: 791307559604
3. [Installation]: You Need To Make Sure The Positive And Negative Pole. We Have Connected The Leads, So That You Can Quickly Install The Tube..
5. [Application]: It Is Mainly Used For Laser Engraving Cutting Machine And Other Engraving Equipments. If It Is Broken In The Transportation, Contact Us Please, We Are Trying Our Best To Solve Your Problem..
4. [Upgraded Version]: Upgraded Laser Tube Has A More Stable Power, Which Is Favorable To Increase The Cutting Speed. The Tube Has Long-Time Life Because Of The Especial Technology..
2. Each Tube Has Been Tested Before Leaving From Our Factory, We Try Our Best To Give A Good Shopping Experience And Make You Not Waste Time And Lose Money..
Features
- 1. [Parameters]: 50 Watt 800mm length 50mm
- 2. Each tube HAS BEEN TESTED before leaving from our factory, we try our best to give a good shopping experience and make you not waste time and lose money.
- 3. [Installation]: You need to make sure the positive and negative pole. We HAVE CONNECTED the LEADS, so that you can quickly install the tube.
- 4. [Upgraded version]: Upgraded laser tube has a more stable power, which is favorable to increase the cutting speed. The tube has long-time life because of the especial technology.
- 5. [Application]: It is mainly used for LASER ENGRAVING CUTTING MACHINE and other engraving equipments. If it is broken in the transportation, contact us please, we are trying our best to solve your problem.
- See more on Amazon...
Brand: SenTECH | Manufacturer: SenTECH
See On Amazon #14
LD-Teemm CO2 Laser Tube, 40W CO2 Laser Tube with Coating 40 watt Length 700mm Dia. 50mm, Wire Pre-Connected for CO2 Laser Cutter Laser Engraving Cutting Machine
Asin: B0C6D81RGT
【Tem00 Mode】: The Output Laser Is The Tem00 Mode, Which Has High Spot Concentration, High Energy Density As Well As Good And Stable Spot, Making Laser Machine With Better Performance.
【Wide Application】: The Co2 Laser Tube Is Mainly Used For Laser Engraving Cutting Machine, For Engraving Acrylic, Cardboard, Ceramics, Fabric, Glass, Leather, Paper, Stone, Wood And More..
【Pre-Connected Wire】: There Are Pre-Connected Wires For Matching Positive And Negative Sides, Make Installation Easy. If You Need Support During The Installation And Usage, Please Send Us Message Through Amazon Without Hesitation.
【Warranty】: Within 3 Months Receiving The Laser Tube, If There Is Any Problem Except For Damage Caused By Man-Made Or Improper Operation, We Will Send A New Laser Tube For Free Or Give A Total Refund. Only Need To Contact Us Through Amazon.
Features
- Parameters and Features : CO2 laser tube Power: 40w /watt, Outer Diameter: 50mm, Length: 700mm, This laser tube has Wire Pre-connected and with heat shrinkable sleeves for a higher level of safety, and Add silicone fixing ring to avoid the problem of easy to crack before. Universal for AC 110V and 220V. The laser tube adopts inner discharge tube coated with nano gold catalyst, power is improved.
- Warranty : Within 3 months receiving the laser tube, if there is any problem except for damage caused by man-made or improper operation, we will send a new laser tube for free or give a total refund. Only need to contact us through Amazon
- TEM00 Mode : The output laser is the TEM00 mode, which has high spot concentration, high energy density as well as good and stable spot, making laser machine with better performance
- Pre-connected Wire : There are pre-connected wires for matching positive and negative sides, make installation easy. If you need support during the installation and usage, please send us message through Amazon without hesitation
- Wide Application : The CO2 laser tube is mainly used for laser engraving cutting machine, for engraving acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood and more.
- See more on Amazon...
Brand: LD-Teemm | Manufacturer: LD-Teemm
Dimensions: 1.97 x 27.56 x 1.97 inches
See On Amazon #15
Eagle 60W 90W 100W 130W 150W CO2 Laser Tube Length 1690mm Dia 80mm for Laser Engraving and Cutting Machine Laser Cutter Wood (130W 1690mm)
Asin: B094CH1MFL
【Metal Heads & High Quality Optics】The Metal Head Is Hard To Crack , Ensure Stable Structure, Laser Beam Quality And Output Power, And Help Achieving Better Heat Control While Operating. The Laser Tubes Are Equipped With Top-Quality, American Ii-Vi Lens To Achieve Strong And Stable Output Power And Good Laser Beam Mode. The Max Output Power For 130W Laser Tube Reaches To 160W,So Laser Tube Power Is Higher Than Rated Power 130W, Strong Power Can Get Better Cutting Effect And Higher Speed..
【Easy Installation &Quality Assurance】We Adapt New Unique Screws Wiring Method, Four Screws Free To Adjust Lens Position, Easy To Connect And Disassemble .You Just Need Unscrew The Screw On The Each Tube End Then Connect The Wire With Laser Tube And Fasten The Screw So All Is Done;6 Months Warranty (Except Man-Made Damage). Each Co2 Laser Tube Is Tested Before Shipping And Double Cartons For The Tube(Except 60W). If Any Problem After Receive The Tube, Contact Us Freely,We Will Do Our Best..
【Long-Lasting Performance】: The Excellent Design And Materials Of This Replacement Laser Tube Create A Durable Hermetic Seal And Offer Superior Heat Dissipation To Give You A Maximum Service Life Of 12,000 Hours Of Operation At Low-Intensity Settings. Use High-Pressure Protective Sleeve, Effectively Solves Some Problems That Often Happen On Others Tubes, Such As Power Leakage, Static Electricity, Poor Contact, Etc. Also, The Two Layers Ensure Its Stronger Sealing, Higher Safety And Anti-Falling..
【Advanced Coating Technology & Stable Output】This Laser Tube Adopts Inner Discharge Tube Coated With Gsi Original Catalytic Technology To Get Perfect Laser Spot , Stable Power Rates And Long Life Span, Power Is At Least 20% Improved, And Service Life Is 20% Longer Than Other Laser Tube.And The Laser Tubes Are Designed, Engineered, And Built With Safety And Reliability In Mind. We Use Parts From The World’S Leading Suppliers And Build The Laser Tubes To International Standards..
Features
- Specification Length: 1690mm, Diameter: 80mm, Rated Power: 130W ,Peak Power:160W. Please notice your machine has enough installation space (diameter and length), all should be a little bigger than the laser tube's size.
- Advanced Coating Technology & Stable Output This laser tube adopts inner discharge tube coated with GSI original Catalytic technology to get perfect laser spot , stable power rates and long life span, power is at least 20% improved, and service life is 20% longer than other laser tube.And the laser tubes are designed, engineered, and built with safety and reliability in mind. We use parts from the world s leading suppliers and build the laser tubes to international standards.
- Metal Heads & High Quality Optics The metal head is hard to crack , ensure stable structure, laser beam quality and output power, and help achieving better heat control while operating. The laser tubes are equipped with top-quality, American II-VI lens to achieve strong and stable output power and good laser beam mode. The MAX output power for 130W laser tube reaches to 160W,so laser tube power is higher than rated power 130w, strong power can get better cutting effect and higher speed.
- Long-lasting Performance : The excellent design and materials of this replacement laser tube create a durable hermetic seal and offer superior heat dissipation to give you a maximum service life of 12,000 hours of operation at low-intensity settings. Use high-pressure protective sleeve, effectively solves some problems that often happen on others tubes, such as power leakage, static electricity, poor contact, etc. Also, the two layers ensure its stronger sealing, higher safety and anti-falling.
- Easy Installation &Quality Assurance We adapt new unique screws wiring method, four screws free to adjust lens position, easy to connect and disassemble .you just need unscrew the screw on the each tube end then connect the wire with laser tube and fasten the screw so all is done;6 months warranty (except man-made damage). Each co2 laser tube is tested before shipping and double cartons for the tube(except 60w). If any problem after receive the tube, contact us freely,we will do our best.
- See more on Amazon...
Brand: ADVANCED AUTOMATION EAGLE | Manufacturer: ADVANCED AUTOMATION EAGLE
See On Amazon #16
OMTech 80W CO2 Laser Tube for Laser Engraver & Cutter Machine, 1250mm 80mm Dia Laser Cutter Tube with Metal Head 10000hr MTTF, Laser Cutting Engraving Machine Replacement Tube for Wood Acrylic Stone
Asin: B0BJKRZ69R | Model: RYGEL-LATST8000 | PartNumber: RYGEL-LATST8000
Safe Operation: With Integrated Water Tubing And Ports, Our Laser Engraver Replacement Tube Allows For Efficient Cooling And Easy Connection To A Water Pump Or Water Chiller, While The Hermetically Sealed Borosilicate Glass Case Offers Exceptional Durability.
Satisfication Guaranteed: Order This Laser Engraving Machine Tube From Omtech Today And Enjoy Fast Us-Based Shipping, Easy Hook-Up With Preinstalled Connection Wires And Ports, An Industry-Leading 16 Month Warranty, And Ever Helpful Customer Service And Tech Support.
Wide Application: This 1250 Mm (49.2") Long 80 Mm (3.1") Wide Laser Tube Operates At 22Kv And 5Ma For Engraving Acrylic, Cardboard, Ceramics, Fabric, Glass, Leather, Paper, Stone, Wood, And More.
Precision Masterpieces: Achieve Precise Cuts Using Your Laser Engraver And Cutter Machines With This Single-Mode Laser Cutter Tube, Which Features A 5 Mm Focused Beam Spot And An American Ii-Vi Infrared Lens For Reduced Light Attenuation.
Features
- POWERFUL LASER TUBE: OMTech's 80W CO2 laser tube, with tempered borosilicate glass, premium II-VI infrared lens, gold catalyst coating, and 10,000 hour long service life, ensures powerful and stable laser beam for optimal performance
- PRECISION MASTERPIECES: Achieve precise cuts using your laser engraver and cutter machines with this single-mode laser cutter tube, which features a 5 mm focused beam spot and an American II-VI infrared lens for reduced light attenuation
- SAFE OPERATION: With integrated water tubing and ports, our laser engraver replacement tube allows for efficient cooling and easy connection to a water pump or water chiller, while the hermetically sealed borosilicate glass case offers exceptional durability
- WIDE APPLICATION: This 1250 mm (49.2) long 80 mm (3.1) wide laser tube operates at 22kV and 5mA for engraving acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood, and more
- SATISFICATION GUARANTEED: Order this laser engraving machine tube from OMTech today and enjoy fast US-based shipping, easy hook-up with preinstalled connection wires and ports, an industry-leading 16 month warranty, and ever helpful customer service and tech support
- See more on Amazon...
Brand: OMTech | Manufacturer: OMTech
Weight: 5.70 Pounds
Warranty: 9 month warranty
See On Amazon #17
PRESIONQI, CO2 Glass Laser Tube for CO2 Laser Engraving and Cutting Machine, 95W Laser Tube Length 1250mm Dia.80mm with Metal Head (80W-95W)
Asin: B0CLZR6CD5 | Model: CO2 Laser Tube 80W | PartNumber: CO2 Laser Tube 80W
Safe Operation: With Integrated Water Tubing And Ports, Our Laser Engraver Replacement Tube Allows For Efficient Cooling And Easy Connection To A Water Pump Or Water Chiller, While The Hermetically Sealed Borosilicate Glass Case Offers Exceptional Durability..
Wide Range Of Applications: The Working Voltage Of The Laser Tube Is 22Kv And The Current Is 5Ma, Which Can Be Used For Engraving Acrylic, Cardboard, Ceramics, Fabrics, Glass, Leather, Paper, Stone, Wood And More..
Advanced Manufacturing Technology: Using Integrated High-Density Polyethylene Material, Light Weight, Rupture-Resistant, Impact-Resistant, High Power, Long Service Life..
Laser Tube: 80-95W Co2 Laser Tube, With Tempered Borosilicate Glass, Premium Ii-Vi Infrared Lens, Gold Catalyst Coating For Reduced Light Attenuation, And 10,000 Hours Service Life, Ensures Powerful And Stable Laser Beam For Optimal.Performance..
Features
- Model: F2 Power:80-95W Length: 1250mm Diameter: 80 2mm; a great replacement for the same power or same legth laser tube.
- Laser Tube: 80-95W CO2 laser tube, with tempered borosilicate glass, premium II-VI infrared lens, gold catalyst coating for reduced light attenuation, and 10,000 hours service life, ensures powerful and stable laser beam for optimal.performance.
- Safe Operation: With integrated water tubing and ports, our laser engraver replacement tube allows for efficient cooling and easy connection to a water pump or water chiller, while the hermetically sealed borosilicate glass case offers exceptional durability.
- Advanced manufacturing technology: Using integrated high-density polyethylene material, light weight, rupture-resistant, impact-resistant, high power, long service life.
- Wide Range of Applications: the working voltage of the laser tube is 22kV and the current is 5mA, which can be used for engraving acrylic, cardboard, ceramics, fabrics, glass, leather, paper, stone, wood and more.
- See more on Amazon...
Brand: PRESIONQI | Manufacturer: PRESIONQI
Dimensions: 3.15 x 39.37 x 3.15 inches
See On Amazon #18
HUNST 40W/50W Co2 Laser Tube Length 700mm/800mm Diameter 50mm with Metal Head 3000 Hours lifespan for CO2 Laser Cutter and Engraver. (SP 40W A)
Asin: B0BGPDMCY4 | Model: SP 40W | PartNumber: SP 40W
【Advantages】All Of Our Tubes Are Coated With Nano Gold Catalyst, Compared To Non-Coating One, Its Power Increase About 7-20W. Uses Temoo Mode For Output, High Spot Concentration, Higher Energy And More Stable Power. With Metal Head, It Is Not Easy To Crack Like The Glass Head Laser Tube, Make Service Life Longer..
【Application】This Co2 Laser Tube Is Mainly Used For Laser Cutter Or Laser Engraving Machine, Which Can Carve And Cut Acrylic, Cloth, Leather, Bamboo, Wood, Engraving, Etc..
【Quality Assurance】Each Tube Is Tested Before Shipping And We Will Provide A Safe Packaging. If Any Problem After Receives The Tube, Do Let Us Know. We Are Willing To Provide The Best Services And Will Provide 3 Months Warranty (Except Man-Made Damage)..
【Pre-Connected Cable】There Are Pre-Connected Cables For Matching The Positive And Negative Poles, Which Is Easy To Install. If You Need Support During Installation And Use, Please Don't Hesitate To Drop Us A Message Via Amazon..
Features
- Power This CO2 laser tube Power: 40w /watt, Outer Diameter: 50mm, Length: 700mm, universal for AC 110V and 220V.
- Pre-connected cable There are pre-connected cables for matching the positive and negative poles, which is easy to install. If you need support during installation and use, please don't hesitate to drop us a message via Amazon.
- Advantages All of our tubes are coated with nano gold catalyst, compared to non-coating one, its power increase about 7-20W. Uses TEMOO mode for output, high spot concentration, higher energy and more stable power. With metal head, it is not easy to crack like the glass head laser tube, make service life longer.
- Quality Assurance Each tube is tested before shipping and we will provide a safe packaging. If any problem after receives the tube, do let us know. We are willing to provide the best services and will provide 3 months warranty (except man-made damage).
- Application This CO2 laser tube is mainly used for laser cutter or laser engraving machine, which can carve and cut acrylic, cloth, leather, bamboo, wood, engraving, etc.
- See more on Amazon...
Brand: DGHUNST | Manufacturer: DGHUNST
Dimensions: 31.50 x 6.30 x 6.30 inches
Warranty: 3 months
See On Amazon #19
Inccala CO2 Laser Power Supply for Laser Tube 60W 110V CO2 Laser Power Supply for Laser Cutter and Engraver Machine
Asin: B0BTSRRCJV
【Perfect Adaptability】Each Connection Port Is Clearly Labeled The Power Supply Specification, It Can Help You Install Quickly And Easily. Replacement Parts For Co2 Laser Tube, Can Be Directly Connected To The Laser. It Has A Good Matching Performance With The Laser Tube, Perfectly Compatible With Your Laser Tube Models..
【Security Protection】We Inprove The Safety Performance Of This Laser Power Supply. With Well-Grounded Enclosure,The Input And Output Are Separated Completely Which Can Avoid Getting An Electric Shock. The Power Supply Can Work In Open-Circuit For A Short Time, Avoid The Damage Of Laser Power Supply..
【Convient Operation】The Start And Stop Of Laser Is Can Be Easily Controlled. The Power Supply Comes With Ttl Signal Indication,Water Through Signal Indication And Laser Output Indication. It Also Can Give Your Machine Additional Protection From Variable Mains Power And Any Open-Circuit Faults. There Is A 'Test' Button Can Speeds Fault Detection, Help You Slove System Problems..
【High Performance Power Supply】The Power Supply Has The Feature Of High-Efficiency And High-Frequency, Can Make Full Use Of The Performance Of The Co2 Laser, Improve The Conversion Efficiency, And Extend The Life Of The Laser..
Features
- Basic Parameters Inccala 60W co2 laser power supply, rated voltage of 110V, maximum current of 22mA. The CO2 laser matching power supply is designed exclusively for engraving machine, and can be applicable to laser tube of most various manufacturers.
- High Performance Power Supply The power supply has the feature of high-efficiency and high-frequency, can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser.
- Perfect Adaptability Each connection port is clearly labeled the power supply specification, it can help you install quickly and easily. Replacement parts for CO2 laser tube, can be directly connected to the laser. It has a good matching performance with the laser tube, perfectly compatible with your laser tube models.
- Convient Operation The start and stop of laser is can be easily controlled. The power supply comes with TTL signal indication,water through signal indication and laser output indication. It also can give your machine additional protection from variable mains power and any open-circuit faults. There is a 'TEST' button can speeds fault detection, help you slove system problems.
- Security Protection We inprove the safety performance of this laser power supply. With well-grounded enclosure,the input and output are separated completely which can avoid getting an electric shock. the power supply can work in open-circuit for a short time, avoid the damage of laser power supply.
- See more on Amazon...
Brand: Inccala | Manufacturer: Inccala
See On Amazon #20
Mssoomm 50W 50 watt Co2 Laser Tube Length 800mm Dia 55mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine
Asin: B08BNPT1PD | Ean: 0743791954618 | UPC: 743791954618
【Tem00 Mode】: The Output Laser Is The Tem00 Mode, Which Has High Spot Concentration, High Energy Density As Well As Good And Stable Spot, Making Laser Machine With Better Performance.
【Metal Head】: With Metal Head, It Is Not Easy To Crack Like The Glass Head Laser Tube, Make Service Life Longer.
【Pre-Connected Wire】: There Are Pre-Connected Wires For Matching Positive And Negative Sides, Make Installation Easy. If You Need Support During The Installation And Usage, Please Give Us Message Through Amazon Without Hesitation.
【Warranty】: Within 3 Months Receiving The Laser Tube, If There Is Any Problem Except For Damage Caused By Man-Made Or Improper Operation, We Will Send A New Laser Tube For Free Or Give A Total Refund. What You Need To Do Is To Message Us Through Amazon.
Features
- REPLACEMENT DETAILS : This CO2 laser tube Power: 50w /watt, Outer Diameter: 55mm, Length: 800mm, universal for AC 110V and 220V, you can get more details from the 2nd image. The laser tube adopts inner discharge tube coated with nano gold catalyst, power is improved, and service life can get 3000hr
- WARRANTY : Within 3 months receiving the laser tube, if there is any problem except for damage caused by man-made or improper operation, we will send a new laser tube for free or give a total refund. What you need to do is to message us through Amazon
- TEM00 MODE : The output laser is the TEM00 mode, which has high spot concentration, high energy density as well as good and stable spot, making laser machine with better performance
- Pre-connected Wire : There are pre-connected wires for matching positive and negative sides, make installation easy. If you need support during the installation and usage, please give us message through Amazon without hesitation
- METAL HEAD : With metal head, it is not easy to crack like the glass head laser tube, make service life longer
- See more on Amazon...
Manufacturer: Mssoomm
See On Amazon
Looking For Something Else?
Search