Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)
Asin: B073LK77FQ | Ean: 0603470406626 | UPC: 603470406626
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding And Holding Postion Accurately..
With 1 Rail Clamp Screw And 2 Scope Clamp Screw Per Side, Ensure Mount Any 1 Inch Scope Firmly, Just Twist Off The Nut And Mount The Base On The 21Mm Rail Easily..
The Ring Is For Most Scopes Which Are In 1 Inch / 25.4Mm Scope Tube. High Profile, 0.71 Inch Gap From Base Of Mount To Bottom Of Rings. ( Item Height: 2 Inch).
Design In Hollowed-Out Configuration Between The Ring And The Bottom Of The Base, To Release Heavy Duty When Clamping Your Scope..
Features
- Double scope ring mount for Picatinny/ Weaver Rail (21mm).
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch)
- With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
See On Amazon Similar To Modkin Scope Rings Rifle Scope
#1
Vortex Optics Hunter Riflescope Rings, 1 inch - Medium, Black, 2 Count (Pack of 1)
Asin: B003GSOKDG | Model: RING-M | PartNumber: RING-M | Ean: 0875874002180 | UPC: 875874002180
Made From Aircraft-Grade 6061-T6 Aluminum For Optimum Strength. Torque Specs: Base Clamp Screws-25-30 In/Lbs, Ring Screws-15 In/Lbs..
Backed By Our Unlimited, Unconditional, Lifetime, Vip Warranty. A Fully Transferable Promise To Repair Or Replace Your Item If It Becomes Damaged/Defective. Does Not Cover Loss, Theft, Deliberate Damage Or Cosmetic Damage That Doesn't Hinder Performance..
Sold Two Rings Per Package..
Mounting To A Picatinny Or Weaver Type Rail, The Standard, 2-Screw Hunter Rings Are A Nice Match For General Hunting Setups. Do Not Recommend The Hunter Rings For Use On Heavy Recoiling Rifles..
Features
- These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.
- Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Do not recommend the Hunter Rings for use on heavy recoiling rifles.
- Made from aircraft-grade 6061-T6 aluminum for optimum strength. Torque Specs: Base Clamp Screws-25-30 in/lbs, Ring Screws-15 in/lbs.
- Sold two rings per package.
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
- See more on Amazon...
First Available: 01/01/2016
Brand: Vortex | Manufacturer: Vortex Optics
Dimensions: 1.88 x 3.50 x 5.00 inches | Weight: 0.20 Pounds
Warranty: Unlimited, unconditional lifetime warranty.
See On Amazon #2
Modkin 1 Inch Scope Rings Set of 4, 2 Pieces High Profile Scope Mounts & 2 Pieces Medium Profile Scope Rings for Picatinny/Weaver Rail
Asin: B081NG7FCS | Ean: 0603470407869 | UPC: 603470407869
Lightweight: Aluminum Alloy With Black Anodized Surface, Sturdy And Lightweight. The Hollowed Out Is Designed To Be Extremely Lightweight And Provide Potential Vision..
Size Detail: Medium Profile Dimension: 1.9 X 1.6 X 0.8 Inch, Weight: 2 Ounce; High Profile Dimension: 2.0 X 1.6 X 0.8 Inch, Weight: 2 Ounce..
Rail Clamp Screw Design: With 1 Rail Clamp Screw And 2 Scope Clamp Screws Perside, Ensure Mount All 1 Inch Scope Firmly. Comes With 2 Pieces Allen Wrench..
Built-In Tape Protection: Not Only Can It Prevent The Scope From Being Scratched, But Also The Scope Moving Forward Due To The Recoil Force Of Multiple Shots..
Features
- Perfect for All 21mm Picatinny/ Weaver Rails: This set includes 2 pieces medium profile and 2 pieces high profile. Suitable for all 1 inch / 25.4mm scope tube.
- Built-in Tape Protection: Not only can it prevent the scope from being scratched, but also the scope moving forward due to the recoil force of multiple shots.
- Lightweight: Aluminum alloy with black anodized surface, sturdy and lightweight. The hollowed out is designed to be extremely lightweight and provide potential vision.
- Rail Clamp Screw Design: With 1 rail clamp screw and 2 scope clamp screws perside, ensure mount all 1 inch scope firmly. Comes with 2 pieces allen wrench.
- Size Detail: Medium Profile Dimension: 1.9 x 1.6 x 0.8 inch, Weight: 2 ounce; High Profile Dimension: 2.0 x 1.6 x 0.8 Inch, Weight: 2 ounce.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
Weight: 0.13 pounds
See On Amazon #3
Arken Optics Rigid Precision 20 MOA 34mm Scope Mount for Precision Shooting
Asin: B08HCDDFS9 | Ean: 0652026691467 | UPC: 652026691467
20 Moa Built In Elevation.
2.5 Inch Cantilever Forward Extension For Better Eye Relief.
Fits 1913 Picatinny Rails.
Rigid Precision Scope Mount Combines Highest Precision To Ensure Ultimate Accuracy And Consistency.
Features
- CNC machined from Aircraft Billet Aluminum with Extremely High Precision
- Rigid Precision Scope Mount combines highest precision to ensure ultimate accuracy and consistency
- 20 MOA Built in Elevation
- Fits 1913 Picatinny Rails
- 2.5 Inch Cantilever Forward Extension for Better Eye Relief
- See more on Amazon...
Brand: Arken Optics | Manufacturer: Arken Optics
Dimensions: 2.50 x 5.70 x 2.00 inches | Weight: 0.55 Pounds
See On Amazon #4
Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black
Asin: B07G2SM28N | Ean: 0704715312341 | UPC: 704715312341
Mounts To Any Flat Top Picatinny Rail Equipped Rifle.
5 Ounces In Weight And 5 Inches In Total Length, With A Base Of 3 Inches And 2.5 Inches Of Spacing Between The Rings.
2 Inches Of Forward Extension Allows Extra Flexibility For Optimum Eye Relief And Shooting Position.
Slim Profile Design Offers The Weight Of Lightweight Scope Rings With The Added Rigidity And Convenience Of A One Piece Mount.
Features
- Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.31 Pounds
See On Amazon #5
Vortex Optics Pro Series Riflescope Rings - 1 inch - Medium Height [0.95 Inches | 24.13 mm], Black
Asin: B07MSJP2JY | Model: PR1-M | PartNumber: PR1-M | Ean: 0843829101271 | UPC: 843829101271
Streamlined, Lightweight And Durable, These Rings Use Four T-25 Torx-Style Socket Cap Screws For Secure Mounting..
Backed By Our Unlimited, Unconditional, Lifetime, Vip Warranty. A Fully Transferable Promise To Repair Or Replace Your Item If It Becomes Damaged/Defective. Does Not Cover Loss, Theft, Deliberate Damage Or Cosmetic Damage That Doesn't Hinder Performance..
Fits Weaver And Picatinny Rails | Weight (Per Ring): 45.92 Grams - 1.62 Oz.
The Finishing Touch To Your Rifle And Optic Combination. Pro Series Rings Combine Rock-Solid Reliability And Strength With High Quality Machining To Ensure Ultimate Accuracy And Consistency..
Features
- These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0.95 inches (24.13 mm) from the base. Sold two rings per package. Made in the USA.
- The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.
- Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.
- Fits Weaver and Picatinny Rails | Weight (Per Ring): 45.92 Grams - 1.62 oz
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
- See more on Amazon...
First Available: 01/23/2023
Brand: Vortex | Manufacturer: Vortex Optics
Dimensions: 9.10 x 9.10 x 9.10 inches | Weight: 0.20 pounds
Warranty: Unlimited, unconditional lifetime warranty.
See On Amazon #6
LONSEL 1'' Dovetail Scope Rings, 2Pcs High Profile & 2Pcs Medium Profile 1 Inch Scope Mount Rings for 11mm Dovetail Rails (High Profile - 2 Pack)
Asin: B0BWJFL9BS | Ean: 0759838982636 | UPC: 759838982636
✌【Built-In Tape Protection & With Stop-Pin Design】 Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding And Holding Postion Accurately. One Of The High Rings Have A Stop Pin The Bottom, Which Prevents The Ring From Sliding Once Set..
✌【Rail Clamp Screw Design & Easy To Install】With 2 Rail Clamp Screws And 4 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench And Mount The Base On 11Mm Dovetail Rail, Simple And Quick To Remove Or Install. Comes With 1 Pcs Allen Wrench And 1 Pcs Spare Screws..
✌【High Quality Aluminum, Solid & Durable】Precision Machining Of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish. Sturdy & Lightweight Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
✌【1 Inch Scope Rings】Perfect Fit For 1" Scope Tube. 2 Pcs High Profile: 0.82'' Gap From Base Of Mount To Bottom Of Ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz Per Ring..
Features
- Perfect 1" Scope Rings For 11mm Dovetail Rails LONSEL1'' Dovetail Scope Ring Mounts include 2 pcs high profile in one package. These scope rings fit for 3/8'' or 11mm dovetail rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. A must have scope rings for hunting shooting!
- 1 Inch Scope Rings Perfect fit for 1 scope tube. 2 Pcs High Profile: 0.82'' gap from base of mount to bottom of ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz per ring.
- Built-In Tape Protection & With Stop-Pin Design Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. One of the high rings have a stop pin the bottom, Which prevents the ring from sliding once set.
- High Quality Aluminum, Solid & Durable Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field.
- Rail Clamp Screw Design & Easy To Install With 2 rail clamp screws and 4 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 11mm dovetail rail, simple and quick to remove or install. Comes with 1 pcs allen wrench and 1 pcs spare screws.
- See more on Amazon...
Brand: LONSEL | Manufacturer: LONSEL
Warranty: 6-Month Warranty
See On Amazon #7
CVLIFE 1 Inch Scope Rings - Medium Profile Precision Rifle Scope Mount for 20mm Picatinny Rails - 2 Pieces
Asin: B0CC2LXV7F
▶【 High-Quality Precise Rail Rings 】Made From Aircraft-Grade 6061-T6 Aluminum Alloy With A Matte Black Anodized Finish To Prevent Scratches And Blemishes. Our Sporting Optics Mounts & Rings Are Cnc Machined With Zero Tolerances For Errors In Any Conditions..
▶【 Lightweight And Durable Scope Mounting Kit】The Package Includes Two Rings, A T15 Wrench, And Four Free Screws. Each Ring Has A Weight Reduction Design And Weighs 1.9 Oz..
▶【 Torx Screws Easy Precise Mounting 】 Stainless Steel Mounting Hardware Tightens Quickly And Firmly While Protecting The Screws From Stripping. Cvlife Recommends A Maximum Torque Setting Of No More Than 18 In/Lbs For Ring Screws And 30 In/Lbs For Base Screws..
▶【Stable Scope Mount With Recoil Stop】The Scope Ring With Enhanced Recoil Stop Prevents The Scope From Moving Forward, Allowing For Stability And Safe Mounting. Two T-15 Torx Screws Per Side And 0.85-Inch Extra-Wide Sides Ensure Secure Mounting Of All 1-Inch Scopes..
Features
- Medium Profile Precision Scope Ring The 1 inch scope rings positions the center of the scope tube 0.98 inches from the base. Only suitable for Picatinny rails, not compatible with Weaver rails.
- Stable Scope Mount with Recoil Stop The scope ring with enhanced recoil stop prevents the scope from moving forward, allowing for stability and safe mounting. Two T-15 Torx screws per side and 0.85-inch extra-wide sides ensure secure mounting of all 1-inch scopes.
- High-quality Precise Rail Rings Made from aircraft-grade 6061-T6 aluminum alloy with a matte black anodized finish to prevent scratches and blemishes. Our sporting optics mounts & rings are CNC machined with zero tolerances for errors in any conditions.
- Torx Screws Easy Precise Mounting Stainless steel mounting hardware tightens quickly and firmly while protecting the screws from stripping. CVLIFE recommends a maximum torque setting of no more than 18 in/lbs for ring screws and 30 in/lbs for base screws.
- Lightweight and Durable Scope Mounting Kit The package includes two rings, a T15 wrench, and four free screws. Each ring has a weight reduction design and weighs 1.9 oz.
- See more on Amazon...
Brand: CVLIFE | Manufacturer: CVLIFE
Dimensions: 1.77 x 1.69 x 0.85 inches
See On Amazon #8
LONSEL 1'' Scope Rings, 2Pcs High Profile & 2Pcs Medium Profile 1 Inch Scope Mount Rings for Picatinny Rail (High Profile - 2 Pack)
Asin: B0BWDZTSM1 | Ean: 0759838982650 | UPC: 759838982650
✌【Hollowed-Out Design & Built-In Tape Protection】Design In See-Through Style, Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding And Holding Postion Accurately..
✌【Rail Clamp Screw Design & Easy To Install】With 1 Rail Clamp Screw And 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench And Mount The Base On 21Mm Rail, Simple And Quick To Remove Or Install. Comes With 1 Pcs Allen Wrench And 1 Pcs Spare Screws..
✌【High Quality Aluminum, Solid & Durable】Precision Machining Of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish. Sturdy & Lightweight Construction, Build No Wobble, Offer Durable Safe Performance..
✌【1 Inch Scope Rings】Perfect Fit For 1" Scope Tube. 2 Pcs High Profile: 0.71'' Gap From Base Of Mount To Bottom Of Ring, Item Height 2.0'', Dimension 2.0 X 1.6 X 0.8 Inch, Weight 2 Oz Per Ring..
Features
- Perfect for All 21mm Picatinny Rails LONSEL 1'' Picatinny Scope Ring Mounts include 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube.
- 1 Inch Scope Rings Perfect fit for 1 scope tube. 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
- Hollowed-Out Design & Built-In Tape Protection Design in see-through style, Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- High Quality Aluminum, Solid & Durable Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance.
- Rail Clamp Screw Design & Easy To Install With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 21mm rail, simple and quick to remove or install. Comes with 1 pcs allen wrench and 1 pcs spare screws.
- See more on Amazon...
Brand: LONSEL | Manufacturer: LONSEL
Warranty: 6-Month Warranty
See On Amazon #9
Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)
Asin: B071DXCF41 | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0603470403069 | UPC: 603470403069
Lightweight: 1.15Oz Per Ring. High Profile, 20Mm/0.79In Gap From Base Of Mount To Bottom Of Rings. ( Item Height: 1.97'').
With Only 1 Rail Clamp Screw And 1 Scope Clamp Screw Per Side, Quick And Easy To Install. Precision And Repeatable Alignment..
The Ring Is For Most Scopes Which Are In 1''/ 25.4Mm Scope Tube..
Design In Hollowed-Out Configuration Between The Ring And The Bottom Of The Base, To Release Heavy Duty When Clamping Your Scope..
Features
- Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails.
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'')
- The ring is for most scopes which are in 1''/ 25.4mm scope tube.
- With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
See On Amazon #10
Modkin 1'' Dovetail Scope Rings, Medium Profile Scope Mounts for 11mm Dovetail Rails - 2 Pieces (One has Stop pin)
Asin: B073P6BNGC | Ean: 0603470406602 | UPC: 603470406602
✔ Medium Profile, 15Mm(0.6 In) From Top Of The Rail To Bottom Of Scope Rings ( Item Height: 1.6'')..
✔ With Two Rail Clamp Screws And Four Scope Clamp Screws, Precision And Repeatable Alignment..
✔ The Dovetail Ring Is For Most Scopes Which Are In 1''/ 25.4Mm Scope Tube..
✔ One Of The Dovetail Mounts Features A Stop Pin, For Rock Solid Application. Adopt Anti-Oxidation And Anti-Corrosion Coating Treatment..
Features
- Double dovetail rings for 11mm dovetail mount specialized scope mount for .22/Airgun.
- One of the dovetail mounts features a stop pin, for rock solid application. Adopt anti-oxidation and anti-corrosion coating treatment.
- Medium profile, 15mm(0.6 in) from top of the rail to bottom of scope rings ( Item height: 1.6'').
- The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube.
- With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
See On Amazon #11
WestHunter Optics Adjustable Height Picatinny Scope Rings, 1 Inch 30 mm Precision Scope Mount | Black
Asin: B08MDWGJ7F | Model: WH-201-Black | PartNumber: WH-201-Black | Ean: 0618119698249 | UPC: 618119698249
Double Screw Structure At The Bottom For Maximum Stability, Compatible With Picatinny Rails Only(Not Suitable For Most Weaver Rails), Quick And Easy Installation And Removal By Hand, The Torque Values Of The Upper, Middle, And Lower Bolts Are 18 In-Lbs/40 In-Lbs/30 In-Lbs Respectively.
We Offer A Lifetime Warranty, Ensuring That You Can Enjoy It For Years To Come(Please Note That Due To Variations In Lighting Environments, There May Be Slight Differences Between The Product And The Pictures).
Independently Designed By Westhunter Optics And Holds A Us Appearance Patent.
Precision Cnc Machined From 6061 T6 Aircraft-Grade Aluminum Alloy And Finished With Colorful Anodizing For A Unique Look And Extra Durability, Passed Rigorous Tests For Accuracy And Stability, And Allows Your Scope To Hold Zero In Any Harsh And Extreme Environment.
Features
- Adjustable height design for a customized fit, allows the shooter to find the most suitable and comfortable height of scope. Position the center of the riflescope tube at a height of 32mm(1.26") to 38mm(1.5") from the base, compatible with 1 inch and 30 mm tube optics
- Precision CNC machined from 6061 T6 aircraft-grade aluminum alloy and finished with colorful anodizing for a unique look and extra durability, passed rigorous tests for accuracy and stability, and allows your scope to hold zero in any harsh and extreme environment
- Double screw structure at the bottom for maximum stability, compatible with Picatinny rails only(not suitable for most Weaver rails), quick and easy installation and removal by hand, the torque values of the upper, middle, and lower bolts are 18 in-lbs/40 in-lbs/30 in-lbs respectively
- Independently designed by WestHunter Optics and holds a US appearance patent
- We offer a lifetime warranty, ensuring that you can enjoy it for years to come(Please note that due to variations in lighting environments, there may be slight differences between the product and the pictures)
- See more on Amazon...
Brand: WestHunter | Manufacturer: WestHunter
Dimensions: 2.17 x 1.26 x 1.93 inches | Weight: 0.37 pounds
Warranty: We provide "Lifetime Warranty and Replacement" service, but the warranty range does not cover loss, theft, deliberate damage or cosmetic damage that does not hinder the performance of the product.
See On Amazon #12
Modkin 1'' Weaver Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)
Asin: B071989RNV | Ean: 0603470403045 | UPC: 603470403045
Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding And Holding Postion Accurately..
With Only 1 Rail Clamp Screw And 1 Scope Clamp Screw Per Side, Just Twist Off The Nut And Mount The Base On The 20Mm Rail Easily..
The Ring Is For Most Scopes Which Are In 1''/ 25.4Mm Scope Tube. High Profile, 0.98'' Gap From Base Of Mount To Bottom Of Rings. ( Item Height: 2.1'').
Design In Hollowed-Out Configuration Between The Ring And The Bottom Of The Base, To Release Heavy Duty When Clamping Your Scope..
Features
- Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm).
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'')
- With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
Dimensions: 3.94 x 4.72 x 3.94 inches
See On Amazon #13
Arken Optics Halo Scope Rings Precision Picatinny Riflescope Mounts(30mm, Low)
Asin: B0BKZV9B19 | Ean: 0652026694703 | UPC: 652026694703
Arken Optics Recommends Max Torque Settings No Greater Than 18In/Lb For Ring Screws And 30In/Lbs For Base Screws. The Optic Manufacturer's Specification Shall Always Supersede Arken's Halo Rings Specification, Unless Higher..
Halo Scope Rings Are T Serialized, Vibratory Tumbled, Hand-Bead Blasted And Finished Off With A Type Iii Hard Coat Anodize For Added Protection Against Scratches And Blemishing..
Available In 30Mm Or 34 Mm Diameter. Only Work With Picatinny Spec Mounts—Not Work With Weaver Mounts..
Torx Style Socket Screws Along With Enhanced Recoil Lugs Result In Amazing Stability And Secure Mounting. Hex Wrench Included..
Features
- ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.
- Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.
- Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.
- Available in 30mm or 34 mm diameter. Only work with Picatinny spec mounts Not work with Weaver mounts.
- Halo scope rings are t serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize for added protection against scratches and blemishing.
- See more on Amazon...
Brand: Arken Optics | Manufacturer: Arken Optics
Dimensions: 2.10 x 1.85 x 1.00 inches | Weight: 0.31 pounds
See On Amazon #14
Monstrum Precision Scope Rings | 1 inch Diameter | Picatinny | 1.35 inch Height
Asin: B08SWFZ5FD | Ean: 0850004377949 | UPC: 850004377949
1 Inch Diameter Rings For Mounting Standard 1 Inch Rifle Scope Tubes.
Available In Four Heights To Match Your Needs: 0.80 Inch, 1.00 Inch, 1.20 Inch, And 1.35 Inch.
Available With Either Picatinny Or Weaver Standard Base.
Monstrum Precision Scope Rings Are Precision Crafted To A Given Height Specification To Match Your Particular Rifle Setup And Preferred Cheek Weld.
Features
- 1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
- Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes
- Available with either Picatinny or Weaver standard base
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
See On Amazon #15
Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 1 inch Diameter | Black
Asin: B07MJCT11L | Ean: 0704715312389 | UPC: 704715312389
Attaches And Detaches Easily Via Integrated Quick Release Mechanism, Without Additional Tools Or Tightening.
5 Ounces In Weight And 5 Inches In Total Length, With A Base Of 3 Inches And 2.5 Inches Of Spacing Between The Rings.
2 Inches Of Forward Extension Allows Extra Flexibility For Optimum Eye Relief And Shooting Position.
Slim Profile Design Offers The Weight Of Lightweight Scope Rings With The Added Rigidity And Convenience Of A One Piece Mount.
Features
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes to Picatinny equipped rifles
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.38 pounds
See On Amazon #16
LONSEL 1'' Dovetail Scope Rings, 2Pcs High Profile & 2Pcs Medium Profile 1 Inch Scope Mount Rings for 11mm Dovetail Rails - Pack of 4
Asin: B08GQ9FYDM | Ean: 0759838982742 | UPC: 759838982742
✌【Built-In Tape Protection & With Stop-Pin Design】 Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding And Holding Postion Accurately. One Of The High Rings And One Of The Medium Rings Have A Stop Pin The Bottom, Which Prevents The Ring From Sliding Once Set..
✌【Rail Clamp Screw Design & Easy To Install】With 2 Rail Clamp Screws And 4 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench And Mount The Base On 11Mm Dovetail Rail, Simple And Quick To Remove Or Install. Comes With 2 Pcs Allen Wrench..
✌【High Quality Aluminum, Solid & Durable】Precision Machining Of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish. Sturdy & Lightweight Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.55'' Gap From Base Of Mount To Bottom Of Ring, Item Height 1.77'', Dimension 1.61*1.77*0.83 Inch, Weight 1.55 Oz Per Ring; 2 Pcs High Profile: 0.82'' Gap From Base Of Mount To Bottom Of Ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz Per Ring..
Features
- Perfect 1" Scope Rings For 11mm Dovetail Rails LONSEL 4 set of different heights 1'' scope mount rings include 2 Pcs Medium Profile + 2 Pcs High Profile in one package. These scope rings fit for 3/8'' or 11mm dovetail rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!
- 4 Set Of Two Styles 1'' Scope Rings 2 Pcs Medium Profile: 0.55'' gap from base of mount to bottom of ring, Item Height 1.77'', Dimension 1.61*1.77*0.83 Inch, Weight 1.55 Oz per ring; 2 Pcs High Profile: 0.82'' gap from base of mount to bottom of ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz per ring.
- Built-In Tape Protection & With Stop-Pin Design Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. One of the high rings and one of the medium rings have a stop pin the bottom, Which prevents the ring from sliding once set.
- High Quality Aluminum, Solid & Durable Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field.
- Rail Clamp Screw Design & Easy To Install With 2 rail clamp screws and 4 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 11mm dovetail rail, simple and quick to remove or install. Comes with 2 pcs allen wrench.
- See more on Amazon...
Brand: LONSEL | Manufacturer: LONSEL
Dimensions: 0.83 x 1.61 x 2.01 inches | Weight: 0.11 Pounds
See On Amazon #17
Leupold Rifleman Scope Rings
Asin: B001HN5HA2 | Model: 55860 | PartNumber: 55860
1 Inch Tube Diameter.
Matte Black.
.987" High.
First Available: 09/16/2008
Brand: Leupold | Manufacturer: Leupold
Dimensions: 1.00 x 5.20 x 4.40 inches | Weight: 0.20 Pounds
Warranty: See manufacturer
See On Amazon #18
Arken Optics Rigid Precision Scope Mount 0 MOA 30mm Cantilever Picatinny Lightweight Rifle Scope Mount
Asin: B0CG61LPS9
The Mount Is Perfectly Concentric And Provides A Solid Platform For Your Rifle Scope, Resulting In Improved Accuracy And Precision. You Can Rest Assured That Your Scope Is Securely Mounted And Won't Shift Or Move During Use..
Our Scope Mount Is Built To Withstand The Toughest Hunting And Shooting Conditions. Its Rugged Construction Is Finished With A Black Anodized Coating For Added Durability And Scratch Resistance, Making It A Must-Have Accessory For Any Serious Hunter Or Shooter..
The Rifle Scope Mount Is Designed To Work With Picatinny Rails And Provides The Option To Select 30Mm Or 34Mm Tube Sizes..
Rigid Precision Scope Mount Can Be Quickly And Easily Mounted With The Included Hardware. Whether You're A Beginner Or Experienced Shooter, Our Mount Is Easy To Install And Use..
Features
- Cantilever Picatinny Scope Mount is made of aircraft-grade aluminum, providing exceptional strength and durability while keeping the weight down, making it ideal for hunting and shooting.
- Rigid Precision Scope Mount can be quickly and easily mounted with the included hardware. Whether you're a beginner or experienced shooter, our mount is easy to install and use.
- The mount is perfectly concentric and provides a solid platform for your rifle scope, resulting in improved accuracy and precision. You can rest assured that your scope is securely mounted and won't shift or move during use.
- The rifle scope mount is designed to work with Picatinny rails and provides the option to select 30mm or 34mm tube sizes.
- Our Scope Mount is built to withstand the toughest hunting and shooting conditions. Its rugged construction is finished with a black anodized coating for added durability and scratch resistance, making it a must-have accessory for any serious hunter or shooter.
- See more on Amazon...
Brand: Arken Optics | Manufacturer: ARKEN
See On Amazon #19
Modkin 1 Inch Dovetail Scope Rings, High Profile Scope Mount for 11mm Dovetail Rails -2 Pieces (One has Stop pin)
Asin: B071L3NZ5D | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0603470403076 | UPC: 603470403076
High Profile, 21Mm(0.8 Inch) From Top Of The Dovetail Rail To Bottom Of Rings ( Item Height: 1.9 Inch)..
With Two Rail Clamp Screws And Four Scope Clamp Screws, Precision And Repeatable Alignment..
The Scope Ring Is For Most Scopes Which Are In 1 Inch/ 25.4Mm Scope Tube..
One Of The Dovetail Rings Features A Stop Pin, For Rock Solid Application..
Features
- Double scope ring mount for 11mm dovetail mounts.
- One of the dovetail rings features a stop pin, for rock solid application.
- High profile, 21mm(0.8 inch) from top of the dovetail rail to bottom of rings ( Item height: 1.9 inch).
- The scope ring is for most scopes which are in 1 inch/ 25.4mm scope tube.
- With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
See On Amazon
Looking For Something Else?
Search