MENSI Propane Gas Fireplaces, Deep Fryer, Frying Furnace Pilot Replacement Parts 750 Millivolt Thermopile Generators (24" Glass Fiber Wire)
Asin: B074DQ1G28 | Ean: 0608651852650 | UPC: 608651852650
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Normal Working Temperature 700-750°C. Replacement Of Heatilator Heat N Glo 24" Lead Thermopile, Fits Empire Dv210, Dv215, Gwt25, Gwt35, And Gwt50 Models Replacement Of Pitco 60125501 Model.
750 Millivolt Replacement Thermopile Generators Have Long Been Used In Self-Powered Heaters And Hot Water Equipment..
The Repalcement Of Heatilator Thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light.
It Will Needs About 60 Seconds (2 Minutes ) To Heat Up To The 750Mv And The Flame Should Be Heat The Middle Of The Head Sensor, So You May Need Time To Waiting The Valve Start Work..
Features
- The Thermopile is a Replacement of Fireplace Pilot Burner Assemnly Parts with Internal resistance (25 C) around 4000 m and heating voltage above 750mV normally installed on plilot assembly used for fireplaces, frying, heating appliance
- It will needs about 60 seconds (2 minutes ) to heat up to the 750mV and the flame should be heat the middle of the head sensor, So you may need time to waiting the valve start work.
- Normal working temperature 700-750 C. Replacement of Heatilator Heat n Glo 24 Lead Thermopile, Fits Empire DV210, DV215, GWT25, GWT35, and GWT50 Models Replacement of PITCO 60125501 Model
- The Repalcement of heatilator thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light
- 750 Millivolt Replacement Thermopile Generators have long been used in self-powered heaters and hot water equipment.
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
Weight: 80.00 Grams
See On Amazon Similar To MENSI Propane Gas Fireplaces Deep
#1
Onlyfire 14421 Spark Generator 1 Male Outlet "AAA" Battery Push Button Ignitor Igniter Replacement for Select Gas Grill Models by Amana, Uniflame, Surefire, Charmglow, Charbroil, Centro, Brinkmann,
Asin: B00WLSEL40 | Ean: 0703194454658 | UPC: 703194454658
Fits Broil-Mate Models: 1155-54 , 1155-57 , 1551-54 , 1551-64 , 1551-74 , 1559-54 , 1651-54 , 1955-54 , 1955-57..
Make Sure You Measure The Size And Check The Shape Of Your Original Parts And Compare With Ours Before You Order..
Fits Sterling Models: 1155-54Sterling , 1155-57Sterling , 4155-54 , 4155-57 , 415557 , 416554 , 4451-54R , 4451-64 , 4451-74 , 4551-54S , 4551-57S , 4551-64S , 4551-67S , 4551-74 , 455174 , 455174R..
Fits Silver Chef Models: 4551-54R , 4551-74R , 4551-77R. Fits Bbqtek Models: Gpf2414ae , Gpf2424ae, Broil King : 9959-74..
Features
- Universal Spark generator BBQ Gas Grill Replacement 1 Outlet "AAA" Battery Push Button Ignitor (Battery not include). 3/4" diameter mounting hole. CSA Certified, Durable and Lasts Longer.
- Fits Silver Chef Models: 4551-54R , 4551-74R , 4551-77R. Fits BBQTEK Models: GPF2414AE , GPF2424AE, Broil King : 9959-74.
- Fits Broil-Mate Models: 1155-54 , 1155-57 , 1551-54 , 1551-64 , 1551-74 , 1559-54 , 1651-54 , 1955-54 , 1955-57.
- Fits Sterling Models: 1155-54STERLING , 1155-57STERLING , 4155-54 , 4155-57 , 415557 , 416554 , 4451-54R , 4451-64 , 4451-74 , 4551-54S , 4551-57S , 4551-64S , 4551-67S , 4551-74 , 455174 , 455174R.
- Make sure you measure the size and check the shape of your original parts and compare with ours BEFORE you order.
- See more on Amazon...
Brand: only fire | Manufacturer: onlyfire
Dimensions: 3.10 x 3.15 x 2.17 Inches | Weight: 0.15 pounds
See On Amazon #2
BBQ Future Electronic Ignition Button, Grill Replacement Igniter Switch Module for Char-Broil Surefire Ignition Systems (Ignition Button)
Asin: B08BN92M9J | Model: CB Ignition Button | PartNumber: CB Ignition Button | Ean: 0792332122979 | UPC: 792332122979
Made Of High Quality Material Ensure Safe And Long-Lasting Performance.
Note: Please Kindly Check The Size And Shape Of Your Original Parts Before Place The Order.
Easy To Replace And Install, No Assembly Required.
Grill Igniter Button Replacement Parts For All Char-Broil Surefire Ignition Systems.
Features
- Package includes 1 Ignition button and 2 black wire
- Grill Igniter button replacement parts for all Char-Broil Surefire Ignition Systems
- Made of high quality material ensure safe and long-lasting performance
- Easy to replace and install, No assembly required
- Note: Please kindly check the size and shape of your original parts before place the order
- See more on Amazon...
Brand: BBQ Future | Manufacturer: BBQ Future
Dimensions: 2.00 x 3.00 x 3.00 Inches | Weight: 0.05 Pounds
Warranty: 1 years.
See On Amazon #3
MENSI Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with / " ( / "- ) Fitting
Asin: B07CN33GSJ | Ean: 0737123200474 | UPC: 737123200474
Platic Black Bakelite Knob Diameter 38Mm And "D" Insert For Valve 6.0-6.1Mm.
Keep The Thermocoupler To Be Heated And Push The Valve Around 5-10S Then Release Hand (If Flame Stops, Ajust The Location Of Thermocouple Tip).
Suitable For Low Pressure Repair Control System For Grill, Fire Pit, Fireplace & Heater (Max Btu Rating: 50000 Working Pressure 65Mbar).
Length Of Thermocoupler 600Mm Head Tip M8*1 (This Is Low Pressure Control Valve Max Rating Btu 50000).
Features
- Low Working Pressure Max 1/2 PSI 65mbar , CE&CSA tested Main Control Valve In & Out with / " ( / "- ) thread
- Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000)
- Platic Black Bakelite Knob Diameter 38mm and D Insert for Valve 6.0-6.1mm
- Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar)
- Keep The Thermocoupler to be Heated and Push the Valve around 5-10s Then Release Hand (if Flame stops, Ajust the location of Thermocouple tip)
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #4
750 temperature Resistance Millivolt Replacement Thermopile Generators Used On Gas FirePlace/Water Heater/Gas Fryer Cluster Thermocouple for 24" Fireplace
Asin: B074KFT8RY | Model: SMT-RDO007 | PartNumber: SMT-RDO007 | Ean: 0796358008767, 0601593013585 | UPC: 601593013585, 796358008767
C. Connecting Type: Spiral Type And Two-Pole Plug-In Type..
D. Lengths: 24 Inches （609Mm）From Shop Gas Components Store.
B. Normal Working Temperature 700-750°C..
Features
- a. Internal resistance (25 C), varies with specifications and length between 1,500 m and 4,500 m .Specifications: Length 24 Rating: 750 mv
- b. Normal working temperature 700-750 C.
- c. Connecting type: spiral type and two-pole plug-in type.
- d. Lengths: 24 inches 609mm from shop GAS COMPONENTS STORE
- See more on Amazon...
Brand: METER STAR | Manufacturer: Made In China
See On Amazon #5
Monessen 26D0809 Gas Fireplace Thermopile Thermogenerator
Asin: B00L1OC76O | Model: 26D0809 | PartNumber: 26D0809
Brand: Monessen
Dimensions: 0.10 x 24.00 x 0.10 Inches
See On Amazon #6
Ganivsor 24" Thermopile Generators 750 Millivolt Thermopile Q313A for Gas Water Heater/Fireplace/Gas Fryer/Oven, 750 Temperature Resistance Cluster Thermocouple for Fireplace (24" Aluminum)
Asin: B0CFTKJ8SS
♨Replace Part Number: 60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113. The Repalcement Of Heatilator Thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light.
♨750 Millivolt Replacement Thermopile Generators Have Long Been Used In Self-Powered Heaters And Hot Water Equipment..
♨It Will Needs About 60 Seconds (2 Minutes ) To Heat Up To The 750Mv And The Flame Should Be Heat The Middle Of The Head Sensor, So You May Need Time To Waiting The Valve Start Work..
♨Normal Working Temperature 700-750°C. Replacement Of Heatilator Heat N Glo 24" Lead Thermopile, Fits Empire Dv210, Dv215, Gwt25, Gwt35, And Gwt50 Models Replacement Of Pitco 60125501 Model.
Features
- The Thermopile is a Replacement of Fireplace Pilot Burner Assemnly Parts with Internal resistance (25 C) around 4000 m and heating voltage above 750mV. Specifications: Length 24"(609mm) Glass Fiber Wire. Connecting type: spiral type and two-pole plug-in type. normally installed on plilot assembly used for fireplaces, frying, heating appliance
- Normal working temperature 700-750 C. Replacement of Heatilator Heat n Glo 24 Lead Thermopile, Fits Empire DV210, DV215, GWT25, GWT35, and GWT50 Models Replacement of PITCO 60125501 Model
- Replace Part Number: 60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113. The Repalcement of heatilator thermopile 100% Tested, Quality Assured. Suitable For American Deep Fryer Thermostat Control Valve Pilots Light
- It will needs about 60 seconds (2 minutes ) to heat up to the 750mV and the flame should be heat the middle of the head sensor, So you may need time to waiting the valve start work.
- 750 Millivolt Replacement Thermopile Generators have long been used in self-powered heaters and hot water equipment.
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin Parts Shop
Dimensions: 0.03 x 1.00 x 1.00 Inches
See On Amazon #7
TEENGSE Pilot Burner and 750 Millivolt Thermopile Assembly, Own 36inch Leads with Aluminium Glass Fiber Cover for Fireplaces, Fryer Stoves, Gas Ovens, Gas Grills, Gas Boilers and Gas Water Heaters
Asin: B0B9S4CYKZ | Model: 750 Millivolt Thermopile Assembly | PartNumber: 750 Millivolt Thermopile Assembly
【Wide Application】:Pilot Burner And 750 Millivolt Thermopile Assembly With 36Inch Lead Is Suitable For Gas Grills, Gas Ovens, Gas Boilers And Gas Water Heaters, Propane Gas & Natural Gas Restaurant Kitchen Fryers..
【Compatibility】:Thermopile Pilot Generator 36Inch 2 Lead Connection Is Compatible With American Fryer Series: Af; Anets Fryer 14Vf(S); Blogit Model; Dynamic Cooking System Fryer F, Fsf; Pitco Fryers 12, 14, 14Ba, Ce14r, 18, 24R, 26, 35C, 45C; Reheater Rtg14; Southbend Fryers 14, 18; Gfs Series (35, 45, 65); Broiler Sgs, Hdg..
【Easy To Install】: The Inlet Of Pilot Burner Can Be Directly Connected To 1/4 Inch Tube, And The Two Lead Connectors Are Connected To Other Gas Devices. Easy To Install Without Wasting Time. Do Not Press Or Pull Hard On The Connection Between The Wire And The Thermopile, As It May Cause Short Circuit And Low Voltage Problems..
【Replaceable Models】:Teengse Assembly Kit Can Be Replaced With The Following Models：5009611, 5009622, 3509612, 5009612, 5009621, 3509611, 3509622, 3509621, 2509612, 2509611, 2509622, 2509621..
【Natural Gas/Lgp Gas Nozzle】: This Pilot Burner And 750 Millivolt Thermopile Assembly Comes With Two Nozzles For Both Natural Gas And Lgp Gas. The Big Hole Is Suitable For Natural Gas, And The Small Hole Is Suitable For Lgp Gas; When You Receive Lp Gas Pilot Burner Assembly, The Built-In Component Is A Lgp Gas Nozzle, And The External One Is A Natural Gas Nozzle..
Features
- INTERNAL RESISTANCE : The resistance of the pilot burner is extremely durable, the size of the resistance varies between 1,500m and 4,500m depending on the size and length, and the normal operating temperature is 700-750 /1292-1382 . To ensure long-term operation of thermopile assembly .
- NATURAL GAS/LGP GAS NOZZLE : This pilot burner and 750 millivolt thermopile assembly comes with two nozzles for both natural gas and LGP gas. The big hole is suitable for natural gas, and the small hole is suitable for LGP gas; when you receive LP gas pilot burner assembly, the built-in component is a LGP gas nozzle, and the external one is a natural gas nozzle.
- WIDE APPLICATION :Pilot burner and 750 millivolt thermopile assembly with 36inch lead is suitable for gas grills, gas ovens, gas boilers and gas water heaters, propane gas & natural gas restaurant kitchen fryers.
- REPLACEABLE MODELS :TEENGSE assembly kit can be replaced with the following models 5009611, 5009622, 3509612, 5009612, 5009621, 3509611, 3509622, 3509621, 2509612, 2509611, 2509622, 2509621.
- COMPATIBILITY :Thermopile pilot generator 36inch 2 Lead Connection is compatible with American Fryer Series: AF; ANETS Fryer 14VF(S); Blogit model; Dynamic Cooking System Fryer F, FSF; PITCO Fryers 12, 14, 14BA, CE14R, 18, 24R, 26, 35C, 45C; Reheater RTG14; SOUTHBEND Fryers 14, 18; GFS Series (35, 45, 65); Broiler SGS, HDG.
- EASY TO INSTALL : The inlet of pilot burner can be directly connected to 1/4 inch tube, and the two lead connectors are connected to other gas devices. Easy to install without wasting time. Do not press or pull hard on the connection between the wire and the thermopile, as it may cause short circuit and low voltage problems.
- See more on Amazon...
Brand: TEENGSE | Manufacturer: TEENGSE
See On Amazon #8
gtpartes 36" 750mv Thermopile Generator Compatible with Pitco Southbend and Anets Gas Fireplace Water Heaters Gas Fryer Cluster 60125501 Replacement Part Number h5882 60J79 60J7901 R942 2103-512 5pcs
Asin: B0C14GNFG3 | Model: GT-001A | PartNumber: GT-001A | Ean: 0755556675843 | UPC: 755556675843
Different Resistance: The Resistors Are Different Due To Different Gauges And Lengths. Between 1500 Mω~4500 Mω, The Output Power Is 750 Ma. The Normal Working Temperature Is 700-750℃, The Voltage Is Lower Than 750Mv, It Should Be Heated To At Least 700C, So As To Gradually Increase To The Working Voltage. This Fireplace Thermopile Is Used To Maintain The Pilot Flame On The 1960S Wall Heater, Not Used For Newer Heaters..
Easy Installation: Screw Type And Bipolar Plug-In Type Can Be Use For Installation..
Thermopile Features: The Length Of The Thermopile Is 36 Inches, Made Of High-Quality Aluminum Material, High Temperature Resistance And Stable Performance. Excellent Performance: The System Can Operate Independently Without The Help Of External Power Supply, It Can Be Used With Q314, Q324, Q327, Q377, Q379, Q382 Pilot Burners..
Replacement Part Number：60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113.
Features
- COMPATIBLE WITH: The fireplace thermopile is applicable to most water heaters, ovens, gas fireplaces furnaces and stoves, Fit for Q313A1188 1950-001 1950-53B 8073485 E31-12 pilot burner, Fit for G01A-332 G01A-512 millivolt power generator thermopile
- REPLACEMENT PART NUMBER 60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113
- DIFFERENT RESISTANCE: The resistors are different due to different gauges and lengths. Between 1500 m ~4500 m , the output power is 750 mA. The normal working temperature is 700-750 , the voltage is lower than 750mv, it should be heated to at least 700C, so as to gradually increase to the working voltage. This fireplace thermopile is used to maintain the pilot flame on the 1960s wall heater, not used for newer heaters.
- THERMOPILE FEATURES: The length of the thermopile is 36 inches, made of high-quality aluminum material, high temperature resistance and stable performance. EXCELLENT PERFORMANCE: The system can operate independently without the help of external power supply, It can be used with Q314, Q324, Q327, Q377, Q379, Q382 pilot burners.
- EASY INSTALLATION: Screw type and bipolar plug-in type can be use for installation.
- See more on Amazon...
Brand: gtpartes | Manufacturer: GTPARTS
Warranty: 90 days.
See On Amazon #9
36" 750mv Thermopile Replacement Part Number 60125501 h5882 60J79,60J7901 R942 2103-512 for Heat Glo Heatilator,Fireplace Thermopile Replacement Fireplace,Stove Accessories
Asin: B09LXL48W7 | Ean: 6447545130641
Brand: palart
See On Amazon #10
ProCom QNSD250RT Vent Free Dual Fuel Stove, Freestanding Fireplace and Indoor Space Heater, Use with Natural Gas or Liquid Propane, Remote Control, Heats up to 1,100 Square Feet, 25,000 BTU
Asin: B07DRS4188 | Model: QNSD250RT | PartNumber: QNSD250RT | Ean: 0800084022741 | UPC: 800084022741
Economical Room Heater: 99.9% Efficient With Vent Free Gas Burner; No Outside Duct Or Chimney Needed For The Natural Gas And Propane Stove; Environmental Protection And Energy Conservation.
Fireplace Heater Specifications: Dimensions - 25” H X 33.5” W X 13”; Weight - 49.8 Lbs. Room Size (Square Feet) - 1,100; For Indoor Use Only.
Safe - Battery Assisted Piezo Ignition With Built-In Pilot Oxygen Depletion Sensor (Ods) Immediately Shuts Down The Gas Heater If Carbon Monoxide Or Lack Of Oxygen Is Detected..
Dependable Space Heater With Remote Control: Remote Control On The Gas Fireplace Automatically Cycles The Room Heater On And Off To Maintain A Desired Room Temperature; Ideal For Greater Heat Flow That Creates A Warm Atmosphere In Your Room.
Features
- TECHNOLOGY & STYLE: 25,000 BTU patented Dual Fuel Technology using natural gas or liquid propane to heat up to 1,100 sq. ft.; 5 improved realistic looking logs and space saving design give a stunning look
- DEPENDABLE SPACE HEATER WITH REMOTE CONTROL: Remote control on the gas fireplace automatically cycles the room heater on and off to maintain a desired room temperature; Ideal for greater heat flow that creates a warm atmosphere in your room
- ECONOMICAL ROOM HEATER: 99.9% efficient with vent free gas burner; No outside duct or chimney needed for the natural gas and propane stove; Environmental Protection and Energy Conservation
- SAFE - Battery Assisted Piezo ignition with Built-in pilot oxygen depletion sensor (ODS) immediately shuts down the gas heater if carbon monoxide or lack of oxygen is detected.
- FIREPLACE HEATER SPECIFICATIONS: Dimensions - 25 H x 33.5 W x 13 ; Weight - 49.8 lbs. Room Size (square feet) - 1,100; For indoor use only
- See more on Amazon...
Brand: ProCom | Manufacturer: ProCom
Dimensions: 25.00 x 34.00 x 13.00 Inches | Weight: 50.00 Pounds
Warranty: 1 year limited warranty.
See On Amazon #11
Onlyfire Stainless Steel Fireplace H-Burner for Natural Gas & Propane Fire Pit and Fireplace, 12 x 6 Inch Rectangular DIY Firepit H Burner for Indoor and Outdoor, BTU Max 60,000
Asin: B01KV2UH04
【Long Lasting Durable Material】 - Welded From Thickened 304 Stainless Steel Pipes (42% Thicker Than Other Brands), Suitable For Long-Term Outdoor Use And Storage. Rated Btu Max, 60,000..
【For Both Natural Gas And Propane】 - Suitable For Indoor And Outdoor Natural Gas Or Propane Gas Burning Fire Features (An Air Mixer Must Be Installed With Propane). Modern Gas Fire Pits Create A Cozy Feeling In Your Outdoor Entertaining Space..
【Easy To Assemble And Install】 - You Just Need To Drop This Burner Pan Into The Fire Pit, Hook Up To A Gas Source, Add Some Fire Glass And You're Done..
【No Whistling】 - Holes Are Drilled Not Punched For Smoother Gas Flow With No Annoying Whistle..
【Hollow Pipes With Uniformly Fuel Distribution Ports For Smoother Gas Flow】 - The Interior Of The H Type Burner Is Connected, The Internal Structure Is Smoother And Less Prone To Blockage. This Makes The Airflow Inside The Burner Smoother, Resulting In A More Even And Beautiful Flame..
Features
- DIY Fireplace and Fire Pit Accessory - H burner measures 12 inch by 6 Inch with 1/2 inch inlet in the middle bar, suitable for any diy fire pit and fireplace project or replace your old gas burner.
- Hollow Pipes with Uniformly Fuel Distribution Ports for Smoother Gas Flow - The interior of the H type burner is connected, the internal structure is smoother and less prone to blockage. This makes the airflow inside the burner smoother, resulting in a more even and beautiful flame.
- Long Lasting Durable Material - Welded from thickened 304 stainless steel pipes (42% thicker than other brands), suitable for long-term outdoor use and storage. Rated BTU Max, 60,000.
- No Whistling - Holes are drilled not punched for smoother gas flow with no annoying whistle.
- For Both Natural Gas and Propane - Suitable for indoor and outdoor natural gas or propane gas burning fire features (an air mixer must be installed with propane). Modern gas fire pits create a cozy feeling in your outdoor entertaining space.
- Easy to Assemble and Install - You just need to drop this burner pan into the fire pit, hook up to a gas source, add some fire glass and you're done.
- See more on Amazon...
Brand: only fire | Manufacturer: onlyfire
Weight: 0.86 pounds
See On Amazon #12
Skyflame 18" x 6" Rectangular Gas Fire Pit and Fireplace H-Burner with 3 Pipes - 304 Stainless Steel - for Indoor & Outdoor Use
Asin: B07BT8X5M4 | Model: SK-FB0037-SS-18 | PartNumber: SK-FB0037-SS-18
Includes * Whistle Free * Connection Kit W/Brass Fittings And Damper C-Clamp.
The Hole Is Drilled By A Machine Rather Than Punched, And The Gas Flows Smoothly Without Causing A Loud Whistle.
Perfect For A Patio Fire Pit Decorating With Fire Glass Or Lava Rock.
Constructed Of High Quality #304 Stainless Steel For Maximum Rust Resistance And Long Life.
Features
- 18" Natural Gas Fire Pit and Fireplace H-Burner, Rated BTU's:90,000
- Constructed of high quality #304 stainless steel for maximum rust resistance and long life
- Includes * Whistle Free * Connection Kit w/Brass Fittings and Damper C-Clamp
- Perfect for a patio fire pit decorating with fire glass or lava rock
- The hole is drilled by a machine rather than punched, and the gas flows smoothly without causing a loud whistle
- See more on Amazon...
Brand: Skyflame | Manufacturer: Skyflame
Dimensions: 1.00 x 18.00 x 6.00 Inches
See On Amazon #13
GASPRO 18 x 6 inch Gas Fireplace Burner, Stainless Steel H Burner for Gas Fireplace, Fire Pit, Propane & Natural Gas, Non-Whistle, Easy to Install
Asin: B07XLM9Q6M
【Non Whistle】Pair With '' Whistle Free'' Connection Kit W/Brass Fittings And Damper C-Clamp, Which Eliminates The Annoying Whistling Sound Of Rushing Gas Flowing Through Other Common Connection Kits.
【Thoughtful Design】Holes Are Machine Drilled And Not Punched. (Punched Holes Can Cause A Loud Whistle). Drilled Ports Offer Increased Efficiency And Create Better Flames.
【Easy To Install】Just Takes About 15 Minutes, The Fireplace Burner Will Get To Work. Rated For 90,000 Btus Per Hour.
【High Quality Material】The Fireplace H Burner Made Of Extra Thick 304-Series Stainless Steel (42% Thicker Than Most Major Brands) Is Built For Long Lasting, Very Easy To Care For.
Features
- Upgrade Your Fireplace The Fireplace Burner Kit (Hi-Flow) for indoor or outdoor fireplace, gas fire pit and fire table (Size: 18" W x 6" D), provide a nice ambiance all evening and creating heat
- High Quality Material The Fireplace H Burner made of extra thick 304-Series stainless steel (42% Thicker than most major Brands) is built for long lasting, very easy to care for
- Non Whistle Pair with '' Whistle Free'' Connection Kit w/Brass Fittings and Damper C-Clamp, which eliminates the annoying whistling sound of rushing gas flowing through other common connection kits
- Easy to Install Just takes about 15 minutes, the fireplace burner will get to work. Rated for 90,000 BTUs per hour
- Thoughtful Design Holes are Machine Drilled and not punched. (Punched holes can cause a loud whistle). Drilled ports offer increased efficiency and create better flames
- See more on Amazon...
Brand: GASPRO | Manufacturer: GASPRO
Dimensions: 18.00 x 18.00 x 6.00 Inches
See On Amazon #14
MENSI 2 Packs / " ( / "- ) / " Thread Propane BBQ Grill Brass Union Adapter
Asin: B07WDVVWMX | Model: SMT-SP001-002 | PartNumber: SMT-SP001-002
Suitable For Grill, Heater, Fireplace Or Rv Trailer Adapter.
Easy Install By Wrench.
2Pcs/Pack Save More.
Made Of Brass More Durable.
Features
- / " ( / "- ) / "
- Made of brass more durable
- Suitable for Grill, Heater, Fireplace or Rv trailer adapter
- 2pcs/Pack save more
- Easy install by wrench
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #15
Americangaslogs Rectangular Gas Fire Pit and Gas Fireplace H-Burner H Burner for Gas Fireplace with 3 Pipes (18 Inch)
Asin: B0C8H95KC6 | Model: H- | PartNumber: H-
Efficient Heat Output: Experience Powerful And Efficient Heating With Our Triple-Tube Burner. Its Advanced Combustion Technology Ensures Maximum Heat Transfer, Keeping You Warm And Cozy During Colder Months..
Premium Quality Construction: Crafted With Premium Materials, Our Triple-Tube Burner Is Built To Last. The Sturdy Construction Ensures Durability And Reliability, Allowing You To Enjoy Its Benefits For Years To Come..
Versatile Performance: Our Black Triple-Tube Burner Offers Versatile Performance To Suit Your Needs. With Adjustable Flame Settings, You Can Customize The Intensity And Create The Perfect Ambiance For Any Occasion..
Striking Design: Enhance Your Space With Our Sleek Black Triple-Tube Burner. Its Stylish Design Adds A Modern Touch To Any Room While Providing Exceptional Functionality..
Features
- Size 18 Inch*6 Inch NPT1/2 connector h burner BTU's: 90000
- Striking Design: Enhance your space with our sleek black triple-tube burner. Its stylish design adds a modern touch to any room while providing exceptional functionality.
- Efficient Heat Output: Experience powerful and efficient heating with our triple-tube burner. Its advanced combustion technology ensures maximum heat transfer, keeping you warm and cozy during colder months.
- Versatile Performance: Our black triple-tube burner offers versatile performance to suit your needs. With adjustable flame settings, you can customize the intensity and create the perfect ambiance for any occasion.
- Premium Quality Construction: Crafted with premium materials, our triple-tube burner is built to last. The sturdy construction ensures durability and reliability, allowing you to enjoy its benefits for years to come.
- See more on Amazon...
Brand: Americangaslogs | Manufacturer: Americangaslogs
Dimensions: 1.20 x 6.00 x 18.00 Inches
See On Amazon #16
MENSI Propane Gas Fireplaces Fire Pits DIY Safety Replacement Part Pilot Burner Assembly for Propane Igniter Kit M8x1 Thermocoupler with OD 4mm Copper Tube Connection
Asin: B07SQL5R8H | Ean: 0741663746330 | UPC: 741663746330
Designed For Fireplaces & Fire Pits For Propane Gas （Compare The Size Before Ordering）.
Attention: 900Mm Pilot Gas Tube Included With M8x1 Olive Nuts For Gas Valve Pilot Port. 4Mm Diameter Copper Tube.
This Can Be A Diy Gas Appliance And Easy Install With Necessary Nuts, Each Connection Should Be Connected Well So Can Work Perfectly.
With Stainess Steel Gas Collecting Box Protect The Flame To Be Extinguished And More Efficient For Ignition Sparks.
Features
- Safety pilot kit with ignition 2.8*0.5mm Flat terminal for Igniter & thermocouple sensor M8*1 end thread for valve 900mm
- With stainess steel gas collecting box protect the flame to be extinguished and more efficient for ignition sparks
- Designed for Fireplaces & Fire pits for propane gas compare the size before ordering
- This can be a DIY gas appliance and easy install with necessary nuts, Each connection should be connected well so can work perfectly
- Attention: 900mm pilot gas tube included with M8X1 Olive Nuts for gas valve pilot port. 4mm diameter Copper tube
- See more on Amazon...
Brand: MENSI | Manufacturer: MNS
See On Amazon #17
Denkuhin 2PCS 36" Thermopile Generator for Gas Fireplace, 750 millivolt Gas Fireplace Thermopile Compatible with Heat Glo Heatilator Gas Stoves Oven Water Heater, Repalce 60125501, 60J79 (Aluminum)
Asin: B0CGCTFHC3 | Model: 36" 750mv Thermopile Generator | PartNumber: 36" 750mv Thermopile Generator
✨Good For Use: The Thermopile For Water Heater Is Made Of Multiple Thermocouples In Series, Which Can Increase Millivolt Output, The Power Is Very Sufficient, The System Can Operate Independently Without The Help Of External Power Supply, Also Fit For Q314, Q324, Q327, Q377, Q379, Q382 Pilot Burners.
✨All Brand-New Part, Q313a 36" Thermopile All Made Of High Quality Copper Material, Temperature Resistance.
✨Tips: The Resistors Are Different Due To Different Gauges And Lengths. Between 1500 Mω~4500 Mω, The Output Power Is 750 Ma. The Normal Working Temperature Is 700-750℃, The Voltage Is Lower Than 750Mv, It Should Be Heated To At Least 700C, So As To Gradually Increase To The Working Voltage..
✨Compatible: The Fireplace Thermopile Is Applicable To Most Water Heaters, Ovens, Gas Fireplaces Furnaces And Stoves, Fit For Q313a1188 1950-001 1950-53B 8073485 E31-12 Pilot Burner, G01a-332 G01a-512 Millivolt Power Generator Thermopile, Replacement Part Number: Replace 60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113.
Features
- Package: 2 Packs of 36" thermopile for gas fireplace, replace part number Q313A
- Compatible: The fireplace thermopile is applicable to most water heaters, ovens, gas fireplaces furnaces and stoves, Fit for Q313A1188 1950-001 1950-53B 8073485 E31-12 pilot burner, G01A-332 G01A-512 millivolt power generator thermopile, Replacement part number: Replace 60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113
- Good for use: The thermopile for water heater is made of multiple thermocouples in series, which can increase millivolt output, The power is very sufficient, The system can operate independently without the help of external power supply, also fit for Q314, Q324, Q327, Q377, Q379, Q382 pilot burners
- Tips: The resistors are different due to different gauges and lengths. Between 1500 m ~4500 m , the output power is 750 mA. The normal working temperature is 700-750 , the voltage is lower than 750mv, it should be heated to at least 700C, so as to gradually increase to the working voltage.
- All brand-new part, q313a 36 thermopile all made of high quality copper material, temperature resistance
- See more on Amazon...
Brand: Denkuhin | Manufacturer: Denkuhin
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #18
ProCom Dual Fuel Ventless Gas Firebox Insert with Mantle, Use with Natural Gas or Liquid Propane, Black
Asin: B009BQ0DTM | Model: PC36VFC | PartNumber: PC36VFC | Ean: 0800084021041 | UPC: 800084021041
Unique Airflow System: The Firebox's Unique Airflow Technology System Ensures Greater Heat Flow With An Extra-Large Viewing Area, Creating A Cozy And Comfortable Atmosphere In Your Home.
Assembled In The Usa: This Firebox Is Proudly Designed, Engineered, Assembled, And Tested In The Usa Using High-Quality Materials And Parts, Ensuring Durability And Reliability.
Easy Installation: The Firebox Can Be Installed Against Or Recessed Into Any Wall Accessible To A Gas Line, Giving You The Flexibility To Create A Custom Look For Your Fireplace. The Product Dimensions Are 32.5” H X 35” W X 19” D And It Weighs 64 Lbs.
Versatile Use: This Firebox Is Approved For Zero Clearance Installation, And Can Be Recessed Into Your Wall Or Paired With A Cabinet Mantel For A Custom Unit. It Is Also Compatible With Any Ventless Gas Log Set, Making It A Versatile Option For Your Home.
Features
- SLIM PROFILE: The ProCom Universal Ventless Firebox features a slim profile that allows for easy installation in tight spaces and flexibility to customize the look of your fireplace; Draw screen, hood and decorative sprayed brick liner completes the look
- VERSATILE USE: This firebox is approved for zero clearance installation, and can be recessed into your wall or paired with a cabinet mantel for a custom unit. It is also compatible with any ventless gas log set, making it a versatile option for your home
- UNIQUE AIRFLOW SYSTEM: The firebox's unique airflow technology system ensures greater heat flow with an extra-large viewing area, creating a cozy and comfortable atmosphere in your home
- EASY INSTALLATION: The firebox can be installed against or recessed into any wall accessible to a gas line, giving you the flexibility to create a custom look for your fireplace. The product dimensions are 32.5 H x 35 W x 19 D and it weighs 64 lbs
- ASSEMBLED IN THE USA: This firebox is proudly designed, engineered, assembled, and tested in the USA using high-quality materials and parts, ensuring durability and reliability
- See more on Amazon...
Brand: ProCom | Manufacturer: ProCom
Dimensions: 43.00 x 19.00 x 44.00 Inches | Weight: 19.00 pounds
Warranty: 1 year limited warranty.
See On Amazon #19
ProCom QNSD250T-R Vent Free Dual Fuel Stove, Freestanding Fireplace and Indoor Space Heater, Use with Natural Gas or Liquid Propane, Heats up to 1,100 Square Feet, 25,000 BTU, Refurbished
Asin: B09JJNH488 | Model: QNSD250T-R | PartNumber: QNSD250T-R | Ean: 0815192027540 | UPC: 815192027540
Economical Room Heater: 99.9% Efficient With Vent Free Gas Burner; No Outside Duct Or Chimney Needed For The Natural Gas And Propane Stove; Environmental Protection And Energy Conservation.
Fireplace Heater Specifications: Dimensions - 25” H X 33.5” W X 13”; Weight - 49.8 Lbs. Room Size (Square Feet) - 1,100; For Indoor Use Only.
Safe - Battery Assisted Piezo Ignition With Built-In Pilot Oxygen Depletion Sensor (Ods) Immediately Shuts Down The Gas Heater If Carbon Monoxide Or Lack Of Oxygen Is Detected..
Dependable Space Heater With Thermostat: Built-In Thermostat Control On The Gas Fireplace Automatically Cycles The Room Heater On And Off To Maintain A Desired Room Temperature; Certified Refurbished Heater Includes All Original Accessories As Like As New.
Features
- TECHNOLOGY & STYLE: 25,000 BTU patented Dual Fuel Technology using natural gas or liquid propane to heat up to 1,100 sq. ft.; 5 improved realistic looking logs and space saving design give a stunning look
- DEPENDABLE SPACE HEATER WITH THERMOSTAT: Built-in thermostat control on the gas fireplace automatically cycles the room heater on and off to maintain a desired room temperature; Certified refurbished heater includes all original accessories as like as new
- ECONOMICAL ROOM HEATER: 99.9% efficient with vent free gas burner; No outside duct or chimney needed for the natural gas and propane stove; Environmental Protection and Energy Conservation
- SAFE - Battery Assisted Piezo ignition with Built-in pilot oxygen depletion sensor (ODS) immediately shuts down the gas heater if carbon monoxide or lack of oxygen is detected.
- FIREPLACE HEATER SPECIFICATIONS: Dimensions - 25 H x 33.5 W x 13 ; Weight - 49.8 lbs. Room Size (square feet) - 1,100; For indoor use only
- See more on Amazon...
Brand: ProCom | Manufacturer: Factory Buys Direct
Dimensions: 26.00 x 13.00 x 33.00 Inches | Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search