DIYmall LoRa32u4 II Lora Development Board Module 915MHZ LiPo SX1276 HPD13 with Antenna for Arduino
Asin: B075MZ11DS | Model: DIY0051N+FZ2862 | PartNumber: DIY0051N+FZ2862
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Built In 100Ma Lipoly Charger With Charging Status Indicator Led, Interface Is 2.0Mm Male.
What You Will Get Is : 1 X Lora32u4 Ii Lora Module, 1 X Ipex 1.13 Uf.L Antenna, 1 X Jst-Ph2.0Mm-2P Plug Cable.
915Mhz Gsm Ipx Ipex 1.13 Uf.L Antenna Built-In 2Dbi, 8Cm,Standing Wave Ratio / S.W.R.≤2.0,Impedance: 50Ω,Max Input Power 50W.
3.3V Regulator With 500Ma Peak Current Output.
Features
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- Built in 100mA lipoly charger with charging status indicator LED, interface is 2.0mm male
- 915MHz GSM IPX IPEX 1.13 UF.L Antenna Built-in 2DBi, 8cm,Standing wave ratio / S.W.R. 2.0,Impedance: 50 ,Max Input power 50W
- What you will get is : 1 X LoRa32u4 II Lora module, 1 X IPEX 1.13 UF.L Antenna, 1 X JST-PH2.0MM-2P plug cable
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
See On Amazon Similar To DIYmall LoRa32u4 II Lora Development
#1
Geekstory 915MHZ ESP32 LoRa Development Board V3 SX1262 ESP32 LoRa V3 with OLED Display + LoRa 32 V3 case + LoRa Antenna for Arduino LoraWan IOT Internet, not Compatible with LoRa V2 (Pack of 2)
Asin: B0CYSKXTXF
-Type-C Usb Interface With Full Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding And Other Protection Measures. Integrated Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System. Integrated Cp2102 Usb-To-Serial Interface Chip..
-If You Have Any Question, Please Confirm It With Geekstory As Follows: Click "Geekstory" (You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click "Ask A Question"..
-This 915Mhz Lora Board Comes Unassembled, Soldering Is Required For You, Not Equipped With Lithium Battery. You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, 5V Type C Power Is Recommended..
-Microprocessor: Esp32-S3fn8 Dual-Core Processor, Frequency Up To 240 Mhz. Sx1262 Lora Node Chip..
Features
- -You will receive, 2pcs 863-928MHz esp32 lora V3 + 2pcs 915mhz lora antenna + 2pcs 2pin 1.25mm cable. (This antenna can be used with the lora case).
- -Microprocessor: ESP32-S3FN8 dual-core processor, frequency up to 240 MHz. SX1262 LoRa node chip.
- -Type-C USB interface with full voltage regulator, ESD protection, short circuit protection, RF shielding and other protection measures. Integrated SH1.25-2 battery interface, integrated lithium battery management system. Integrated CP2102 USB-to-serial interface chip.
- -This 915MHz LoRa board comes unassembled, soldering is required for you, not equipped with lithium battery. You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, 5V type C power is recommended.
- -If you have any question, please confirm it with Geekstory as follows: Click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #2
DIYmalls 915MHz LoRa ESP32 OLED Board V3 Type-C SX1262 + LoRa Antenna IPX 2dBi for Arduino LoRawan IOT (Pack of 2), not Compatible with LoRa V2
Asin: B09VDJJTDB
When You Use Lora Esp32 915Mhz, You Need To Use 2Pcs Together,One Receiving And Another Sending..
If You Have Any Problem, Please Do As Follow: Click " Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
To Make Lora Esp32 Board Work Better, That Would Be Great If You Power Via On-Board Type-C Port 5V.
You Will Receive 2Pcs 915Mhz Esp32 Lora Oled Board V3, 2Pcs 915Mhz Lora Antenna,And 2Pcs 1.25Mm Cable..
Features
- LoRa board 915mhz comes unassembled, soldering required by you, not equipped with lithium battery.
- You will receive 2pcs 915MHz esp32 lora oled board V3, 2pcs 915mhz lora antenna,and 2pcs 1.25mm cable.
- When you use lora esp32 915MHz, you need to use 2pcs together,one receiving and another sending.
- To make lora esp32 board work better, that would be great if you power via on-board type-C port 5V
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #3
LoRa Antenna Pigtail 915MHz 2dBi U.FL IPEX to SMA Connector for ESP32 Lora OLED CubeCell Board IOT Internet of Things (Pack of 4)
Asin: B07LCKNN4H | Model: 8541545929 | PartNumber: 8541545929 | Ean: 0747356629195 | UPC: 747356629195
-915 Antenna Widely Used With 915Mhz Cubecell Board, Htcc-Ab02s Lora Gps, Lora32u4 Ii Etc.
-Standing Wave Ratio: < = 1.5 ; Gain: 2Dbi ；Maximum Power: 10W ；Input Impedance: 50Ω.
-Connector Type: Ipex. Band Definition: 915Mhz, Pls Check Picture.
-Lora Antenna Can Be Used For Esp32 Oled 915 Lora Board,Htcc-Ab02s Lora Gps..
Features
- -915 lora antenna is good for LoRa end devices for the US915 band, development or testing purposes in the lab.
- -lora antenna can be used for esp32 oled 915 lora board,htcc-ab02s lora gps.
- -915 antenna widely used with 915mhz cubecell board, htcc-ab02s lora gps, LoRa32u4 II etc
- -Connector type: ipex. Band definition: 915MHz, pls check picture
- -Standing wave ratio: < = 1.5 ; Gain: 2dBi Maximum power: 10W Input impedance: 50
- See more on Amazon...
Brand: NEXTION | Manufacturer: DIYmalls
Dimensions: 0.12 x 1.22 x 0.28 inches
See On Amazon #4
Comimark 2Pcs LoRa SX1278 Long Range RF Wireless Power Mental Module SX1276 5Km for Arduino
Asin: B07W6ZPH7D | Model: LY369 | PartNumber: LY369 | Ean: 0657835676841 | UPC: 657835676841
Ism Multi-Band, No Need To Apply For Frequency Free Use..
If You Are Not Satisfied With Your Purchase For Any Reason, Please Feel Free To Contact Us At The Buyer Center Or Support Email, 24/7 Quick Reply..
Package Included: 2 X Transceiver Module.
Super Anti-Jamming (Channel Rejection Ratio: 56Db)..
Features
- Using FSK / GFKS technology and LoRa (remote) spread spectrum technology.
- Super anti-jamming (channel rejection ratio: 56db).
- ISM multi-band, no need to apply for frequency free use.
- Package included: 2 x Transceiver Module
- If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply.
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon #5
DIYmall Lora32 V3 Kit ESP32 S3 WiFi+BT Development Board 0.96inch OLED Display SX1262 CP2102 with 915MHZ Antenna Transceiver for Arduino ESP8266 NodeMCU IOT (Pack of 2)
Asin: B0781CPHT1 | Model: FZ2886-A+FZ2899+FZ2891 | PartNumber: FZ2886-A+FZ2899+FZ2891
When You Use Esp32 Oled Lora, You Need To Use 2Pcs Together. One Is Used For Receiving And Another For Sending.
What You Will Get: 2 X Esp32 Lora V3 Oled Development Board + 2 X 915Mhz U.Fl Ipex To Sma Connector Antenna + 2 X Jst 1.25Mm-2P Connector + 2.54 Pin (No Welding).
Application: Smart Cities, Farms, Homes, Industrial Control, House Security, Wireless Meter Reading, And Iot Developers.
Mcu: Esp32-S3, Lora Chip: Sx1262, Usb Socket: Type-C.
Features
- Wi-Fi + BLE + LoRa + OLED display classic IoT dev-board
- MCU: ESP32-S3, LoRa Chip: SX1262, USB Socket: Type-C
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- Application: smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
- What you will get: 2 X ESP32 Lora V3 OLED development board + 2 X 915MHz U.FL IPEX to SMA Connector Antenna + 2 X JST 1.25mm-2P Connector + 2.54 pin (no welding)
- See more on Amazon...
Brand: DIYmall | Manufacturer: Heltec Automation Technology Co., Ltd
Weight: 0.03 Pounds
See On Amazon #6
MakerFocus LoRa SX1262 Module 863 928 MHZ LoRaWAN IoT Development Board ASR6502 MCU 128KB Flash Ultra Low Power Consumption Solar Energy Powered Design with Antenna for Arduino and Intelligent Scene
Asin: B07ZHCMFW4 | Model: HBIHBS-22 | PartNumber: HBIHBS-22
Perfect Circuit Design: Based On Asr6502, Integrated Cp2102 Usb To Serial Port Chip, Convenient For Program Downloading, Debugging Information Printing.
Excellent Feature: Perfectly Compatible With Arduino; Good Impedance Matching And Long Communication Distance. Wide Range Of Application Scenarios - Smart Agriculture, Scenic Area Management, Industry 4.0, Urban Lighting.
Strongest Protection: Type C Interface With Complete Esd Protection,Short Circuit Protection, Rf Shielding,And Other Protection Measures.
Ultra Low Power Design: 3.5Ua In Deep Sleep. Onboard Solar Energy Management System, Can Directly Connect With A 5.5~7V Solar Panel; Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System (Charge And Discharge Management,Overcharge Protection,Battery Power Detection,Usb/Battery Power Automatic Switching).
Features
- LoRa Dev Board: Friendly designed for developers, easy to verify communication solutions
- Ultra Low Power Design: 3.5uA in deep sleep. Onboard solar energy management system, can directly connect with a 5.5~7V solar panel; Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management,overcharge protection,battery power detection,USB/battery power automatic switching)
- Perfect Circuit Design: Based on ASR6502, integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
- Strongest Protection: Type C interface with complete ESD protection,short circuit protection, RF shielding,and other protection measures
- Excellent Feature: Perfectly compatible with Arduino; good impedance matching and long communication distance. Wide range of application scenarios - Smart Agriculture, Scenic Area Management, Industry 4.0, Urban Lighting
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.30 x 1.60 x 0.90 inches
Warranty: No Warranty
See On Amazon #7
Waveshare USB to LoRa Data Transfer Module, Based On SX1262, Suitable for Data Acquisition in Industry and Agriculture-TCXO Crystal oscillator
Asin: B0C23QP97G
Aes Communication To Ensure Data Transmission Security. Supports Multi-Level Relay Networking To Increase The Wireless Communication Distance.
Supports Host Configuration And Firmware Upgrade (Support Firmware Customization For Batch Order). Comes With Online Development Resources And Manual..
Supports Preamble Detection, With Crc, Automatic Packetization, 960 Bytes Cache Functions. Supports Lbt Sending, Rssi Output, At Command Configuration.
Adopts The Original Sx1262 Chip, With -148Dbm Reception Sensitivity And 22Dbm Emitt Power.
Features
- USB-TO-LoRa-xF uses TCXO crystal oscillator and is recommended to be use in 0~85 temperature.
- Adopts the original SX1262 chip, with -148dBm reception sensitivity and 22dBm emitt power
- AES communication to ensure data transmission security. Supports multi-level relay networking to increase the wireless communication distance
- Supports preamble detection, with CRC, automatic packetization, 960 bytes cache functions. Supports LBT sending, RSSI output, AT command configuration
- Supports host configuration and firmware upgrade (support firmware customization for batch order). Comes with online development resources and manual.
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #8
DSD TECH Lora Module SH-B50L RS485/232 to Lora Adapter Lorawan Wireless Transceiver
Asin: B0C9QDHZ25 | Model: SH-B50L | PartNumber: SH-B50L | Ean: 0794251082044 | UPC: 794251082044
Industrial Grade: Built-In Semtech Llcc68 Lora Chip . Support 5V-24V Dc Input. Dsd Tech Also Offers Free Configuration Software..
Warranty:Dsd Tech Provide A 1 Year Warranty And Lifetime Technical Support For This Sh-B50l Rs485/232 To Lora Adapter.If You Have Any Questions, Please Feel Free To Contact Us. We Will Respond Within 24 Hours..
Compatibility:Sh-L1a And Sh-B50l Are Two Lora Communication Products Launched By Dsd Tech. They Can Communicate With Each Other, But Not With Third-Party Lora Products For The Time Being..
Lora To Rs485/Rs232: With This Lora Adapter, You Can Use Lora Communication To Transfer Rs232 Or Rs485 Interface Data From Your Device.Receiving Sensitivity Is -129Dbm, Working In 850. 125~930.125Mhz Band, Lora Spread Spectrum Technology Is Suitable For Long Distance And Complex Environment Communication..
Features
- DSD TECH: DSD TECH focuses on the development of communication connection devices such as USB/Serial/Wireless. We have served more than 100,000 customers in Europe, North America and Japan.
- Lora to RS485/RS232: With this Lora adapter, you can use Lora communication to transfer RS232 or RS485 interface data from your device.Receiving sensitivity is -129dbm, working in 850. 125~930.125MHz band, LoRa spread spectrum technology is suitable for long distance and complex environment communication.
- Industrial Grade: Built-in Semtech LLCC68 Lora chip . Support 5V-24V DC input. DSD TECH also offers free configuration software.
- Compatibility:SH-L1A and SH-B50L are two Lora communication products launched by DSD TECH. They can communicate with each other, but not with third-party Lora products for the time being.
- Warranty:DSD TECH provide a 1 year warranty and lifetime technical support for this SH-B50L RS485/232 to Lora Adapter.if you have any questions, please feel free to contact us. We will respond within 24 hours.
- See more on Amazon...
Brand: DSD TECH | Manufacturer: DSD TECH
See On Amazon #9
Gowoops SX1276 LoRa Radio Wireless 862-930MHz 915MHz UART Serial Module Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer
Asin: B07G7RZLTW | Model: 8541545860 | PartNumber: 8541545860 | Ean: 0705586406108 | UPC: 705586406108
✔ Fec (Forward Error Correction) -- High Coding Efficiency & Good Correction Performance.
✔ Fixed Transmission -- Each Module Can Connect With Other Module In Different Addresses And Channels To Achieve Application Like Networking, Repeating, Etc..
✔ Transparent Transmission (Point To Point) -- Data Sending Is Via Transparent Transmission, The Module Comes With Address.
✔ Wor (Low Power Consumption) -- Work On Radio, Applicable For Battery Powered Applications.
Features
- LoRa spread-spectrum communication, super anti-interference performance -- The module adopts LORA spread spectrum technology, transmitting distance and anti-interference performance are one time more than FSK
- WOR (Low Power Consumption) -- Work on radio, applicable for battery powered applications
- FEC (Forward Error Correction) -- High coding efficiency & good correction performance
- Transparent Transmission (Point to Point) -- Data sending is via transparent transmission, the module comes with address
- Fixed Transmission -- Each module can connect with other module in different addresses and channels to achieve application like networking, repeating, etc.
- See more on Amazon...
Brand: Gowoops | Manufacturer: Gowoops
Dimensions: 6.59 x 2.60 x 0.71 inches
See On Amazon #10
Coolwell Waveshare SX1262 LoRa HAT for Raspberry Pi/Arduino/STM32 Spread Spectrum Modulationup to 81 Available Signal Channel 915MHz Frequency Band Data Transmission up to 5km
Asin: B07VQ8SZ2L | Model: RPI SX1262 915M LoRa | PartNumber: RPI SX1262 915M LoRa | Ean: 0710877228307 | UPC: 710877228307
Auto Multi-Level Repeating, Suit For Ultra Long Range Communication, Allows Multi Network On The Same Region; Low Power Consumption Features Like Deep Sleeping And Wake On Radio, Ideal For Battery-Powered Applications; Customizable Communication Key Which Won't Be Retrieved, Greatly Improves The Security Of User Data.
Supports Lbt, Monitoring The Signal Channel Noise Before Transmitting, Greatly Improves The Success Ratio Under Extreme Environment; Supports Rssi Signal Intensity Indicating, For Evaluating Signal Quality, Tuning The Network; Supports Wireless Parameter Configuration, By Sending Wireless Command/Data Packet, Remotely Configure Or Retrieve The Module Parameter; Supports Fixed-Point Transmission, Broadcast, Signal Channel Monitor.
4X Led Indicators, Easy To Check The Module Status; Lora Spread Spectrum Modulation Technology, Up To 81 Available Signal Channel, Longer Communication Distance, More Robust To Interference.
Features
- Standard RPi 40PIN GPIO extension header, fits Raspberry Pi series boards; Onboard CP2102 USB TO UART converter, for serial debugging; Brings the UART control interface, for connecting host boards like Arduino/STM32
- 4x LED indicators, easy to check the module status; LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference
- Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region; Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications; Customizable communication key which won't be retrieved, greatly improves the security of user data
- Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment; Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network; Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter; Supports fixed-point transmission, broadcast, signal channel monitor
- See more on Amazon...
Brand: Coolwell | Manufacturer: Waveshare
See On Amazon
Looking For Something Else?
Search