6 pin AVR ICSP ISP Pogo Pin Adapter
Asin: B075Q25BK3 | Ean: 0700175809889 | UPC: 700175809889
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Just Position Press And Hold The Pins Over The Pth Holes Or Pads For Programming.
Assembled Before Shipment.
If Pins Are Bend Or Damage, You Can Replace Pin Easily. There Is 2 Spare Pins For Replacement.
Features
- It is pin replaceable and no need to solder pin to the small PC board
- If pins are bend or damage, you can replace pin easily. There is 2 spare pins for replacement
- Just position press and hold the pins over the PTH holes or pads for programming
- Assembled before shipment
- See more on Amazon...
Brand: wosang | Manufacturer: Wosang
See On Amazon Similar To 6 pin AVR ICSP ISP
#1
Geekstory for ATMEL 51 AVR USB ISP ASP Microcontroller Programmer Downloader with Cable + 10Pin to 6Pin Adapter Board for Ender 3 or Ender 3 Pro
Asin: B07NZ59VK2 | Ean: 0747356629607 | UPC: 747356629607
Brand: Geekstory | Manufacturer: Geekstory
Weight: 0.02 pounds
See On Amazon #2
HiLetgo USBTiny USBtinyISP AVR ISP Programmer 6/10 Pin Bootloader for Arduino UNO MEGA
Asin: B01CZVZ1XM | Model: 3-01-1056 | PartNumber: 3-01-1056
Isp Interface: 6 Needle, 10 Needle.
Features
- Power supply options: external power supply and USB power
- Isp interface: 6 needle, 10 needle
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
HiLetgo 51 AVR ATMEGA8 Programmer USBasp USB ISP 10 Pin USB Programmer 3.3V/5V with Cable
Asin: B00AX4WQ00 | Model: 3-01-0497-1 | PartNumber: 3-01-0497-1
Autospeed Autofocus Firmware, The Downloader Will Automatically Track The Chip Frequency To Be Programmed, Automatically Change The Speed, To Achieve Automatic Speed Control..
Reserved Programming Interface, The User Can Upgrade The Download Firmware..
Reserve Mosi, Miso,Ret,Sck,Vcc,Gnd. 6Pin Interface, User-Friendly Interface To Connect The Target Board..
The Output Port Is An Atmel Standard Port. With Overcurrent Protection.Automatic Speed Control.With Power And Write Indicator Lamp.With Usb Power And Target Board Support Target Voltage 5V, Can Choose By Jumper Cap Connection..
Features
- Main Chip:ATMega8A-AU.Support AVR and ASP chip.Support AT89S51/52 microcontroller.
- The output port is an ATMEL standard port. With overcurrent protection.Automatic speed control.With power and write indicator lamp.With USB power and target board support target voltage 5V, can choose by jumper cap connection.
- Autospeed autofocus firmware, the downloader will automatically track the chip frequency to be programmed, automatically change the speed, to achieve automatic speed control.
- Reserve MOSI, MISO,RET,SCK,VCC,GND. 6pin interface, user-friendly interface to connect the target board.
- Reserved programming interface, the user can upgrade the download firmware.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 3.50 x 3.90 x 0.50 inches
See On Amazon #4
Waveshare ATMEL AVR Programmer USB AVRISP XPII Compatible Atmel at AVR ISP mk2 mkII in-System Programmer Supports AVR Studio 4/5/6/7
Asin: B00ID98C5K | Model: USB AVRISP XPII | PartNumber: USB AVRISP XPII | Ean: 0700646946136, 0714491097226, 0614591448198 | UPC: 614591448198, 700646946136, 714491097226
Based On At Avrisp Mkii Firmware,Upgradable To Support Future Devices.
3 Optional Cables To Target Board,Powered From Usb Bus, Does Not Require External Power Supply.
Adjustable Isp Programming Speed Up To 8M Frequency,Usb 2.0 Compliant (Full Speed, 12Mbps).
Programs Both Flash And Eeprom,Supports Fuses And Lock Bit Programming.
Features
- Supports all AVR devices with ISP or PDI interface, and certain 51 Devices
- Programs both Flash and EEPROM,Supports Fuses and Lock Bit Programming
- Based on AT AVRISP mkII firmware,Upgradable to Support Future Devices
- Adjustable ISP programming speed up to 8M frequency,USB 2.0 compliant (full speed, 12Mbps)
- 3 optional cables to target board,Powered from USB bus, does not require external power supply
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Dimensions: 3.54 x 7.09 x 3.94 inches | Weight: 0.02 Pounds
See On Amazon #5
Tiny AVR Programmer - Two ISP headers to use with other AVR microcontrollers - Plugs directly into USB port
Asin: B00B6KNJRY | Model: PGM-11801 | PartNumber: PGM-11801 | Ean: 0700112246517, 0757347352919, 7431905727762 | UPC: 700112246517, 757347352919
The Tiny Avr Programmer Plugs Directly Into Your Usb Port.
Features
- you can shrink your Arduino projects down to "tiny size"
- The Tiny AVR Programmer plugs directly into your USB port
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun
Dimensions: 0.13 x 2.00 x 3.00 inches | Weight: 0.04 pounds
See On Amazon #6
KeeYees 2pcs Downloader Programmer for USBASP for ISP with Cable and 10Pin to 6Pin Adapter Board for 51 for AVR Series Microcontroller
Asin: B0885RKVMC | Ean: 0744678331980, 0744678331997 | UPC: 744678331997, 744678331980
【Easy To Program】: Programming Interface Is Reserved, You Can Upgrade The Downloader Firmware By Yourself. Programming Software: Avr_Fighter, Progisp1.66, Progisp1.67, Progisp1.68, Can Also Compile Lower Or Higher Software, Programming Is Very Convenient..
【10Pin To 6Pin Converter】: Equipped With Standard Atmel Isp10 To Isp6 Port Converter..
【Automatic Speed Regulation】: Autospeed Automatic Speed Control Firmware, The Downloader Will Automatically Track The Frequency Of The Chip To Be Programmed And Automatically Change The Speed To Achieve Automatic Speed Control..
【Easy To Use】: Applicable To Win8.1 / 8/7 / Xp 32-Bit / 64-Bit Computer. It Can Be Directly Connected To The Usb Interface Of The Computer, Which Is Very Convenient To Use. (Please Note: This Product Is Not Suitable For Win10).
Features
- Support 3.3V and 5V : Supports 3.3V and 5V microcontrollers and circuit boards. The output voltage can be adjusted easily by the jumper cap!
- Easy to Use : Applicable to WIN8.1 / 8/7 / XP 32-bit / 64-bit computer. It can be directly connected to the USB interface of the computer, which is very convenient to use. (Please note: this product is not suitable for WIN10)
- Easy to Program : Programming interface is reserved, you can upgrade the downloader firmware by yourself. Programming software: AVR_fighter, PROGISP1.66, PROGISP1.67, PROGISP1.68, can also compile lower or higher software, programming is very convenient.
- Automatic Speed Regulation : AUTOSPEED automatic speed control firmware, the downloader will automatically track the frequency of the chip to be programmed and automatically change the speed to achieve automatic speed control.
- 10PIN to 6PIN Converter : Equipped with standard ATMEL ISP10 to ISP6 port converter.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #7
Compatible Atmel at AVR ISP mk2 MKII ATMEL AVR Programmer USB AVRISP XPII in-System Programmer Supports AVR Studio 4/5/6/7
Asin: B085J2634V | Model: AVR Programmer USB AVRISP XPII | PartNumber: AVR Programmer USB AVRISP XPII | Ean: 0779172279186, 0615311268607, 0657419923675 | UPC: 615311268607, 779172279186, 657419923675
Supports Fuses And Lock Bit Programming.
Upgradable To Support Future Devices,Adjustable Isp Programming Speed Up To 8M Frequency.
Supports All Avr Devices With Isp Or Pdi Interface, And Certain 51 Devices.
Features
- Supports AVR Studio 4/5/6 or higer version(delivered with firmware for AVR Studio 5, can be updated to support other AVR Studio versions)
- Supports all AVR devices with ISP or PDI interface, and certain 51 Devices
- Supports Fuses and Lock Bit Programming
- Upgradable to Support Future Devices,adjustable ISP programming speed up to 8M frequency
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #8
Create idea 1 Set51 AVR USB ISP ASP Microcontroller Programmer Downloader with Cable 10Pin to 6Pin Adapter Board Compatible with Atmel AVR and More Programmer
Asin: B0CQZKS3M4 | Ean: 6942343311556
Applicable To Win8.1 / 8/7 / Xp 32-Bit / 64-Bit Computer,It Can Be Directly Connected To The Usb Interface Of The Computer, Which Is Very Convenient To Use. (Please Note: This Product Is Not Suitable For Win10)..
Compatible With Standard Atmel Isp10 To Isp6 Port Converter..
Supports 3.3 V And 5 V Microcontrollers And Boards - Output Voltage Adjustable Via Jumper..
Features
- The output port is compatible with ATMEL standard port, with overcurrent protection,with power and write indicator lamp.
- Supports 3.3 V and 5 V microcontrollers and boards - output voltage adjustable via jumper.
- Applicable to WIN8.1 / 8/7 / XP 32-bit / 64-bit computer,it can be directly connected to the USB interface of the computer, which is very convenient to use. (Please note: this product is not suitable for WIN10).
- Compatible with standard ATMEL ISP10 to ISP6 port converter.
- See more on Amazon...
Brand: Create idea | Manufacturer: Create idea
See On Amazon #9
JBtek 8 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM
Asin: B00KTELP3I | Model: FBA_pcb board | PartNumber: FBA_pcb board | Ean: 7291348754271, 0520361134546 | UPC: 520361134546
Standard Interface That Can Be Controlled Directly By Microcontroller (Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic).
Indication Led's For Relay Output Status.
Equiped With High-Current Relay, Ac250v 10A ; Dc30v 10A.
Features
- 5V 8-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED's for Relay output status
- See more on Amazon...
Brand: JBtek | Manufacturer: JBtek
Dimensions: 0.79 x 5.12 x 1.97 inches | Weight: 0.24 pounds
See On Amazon #10
AVR ISP mkII Downloader,Compatible with Original Programmer Supports AVR Studio Support for XP/WIN7/WIN8/WIN10
Asin: B097Q1D212 | Model: Yunir30py1vsea97609 | PartNumber: Yunir30py1vsea97609 | Ean: 9130969862041
Supports All Avr Devices With Isp Or Pdi Interface.
Support Isp Programming Of All Avr Chips.
This Product Is Avr Studio4.1 X Interface.
Supports Avr Studio 4/5/6 Or Higher Version, Studio 7.0.
Features
- This USB AVR ISP MKII,100% compatible with original AT ISP MKII programmer, support original firmware automatic upgrade, ISP, PDI and latest TPI download methods.
- Supports AVR Studio 4/5/6 or higher version, Studio 7.0
- Supports all AVR devices with ISP or PDI interface
- This product is AVR Studio4.1 x interface
- Support ISP programming of all AVR chips
- See more on Amazon...
Brand: Yunir | Manufacturer: Yunir
Dimensions: 3.15 x 7.09 x 6.69 inches
See On Amazon #11
Treedix 2pcs ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter
Asin: B0819R4LVG | Model: UNO-0004 | PartNumber: UNO-0004 | Ean: 0765756503112 | UPC: 765756503112
This Board Has The Following New Features: 1.0 Pinout: Added Sda And Scl Pins That Are Near To The Aref Pin And Two Other New Pins Placed Near To The Reset Pin, The Ioref That Allow The Shields To Adapt To The Voltage Provided From The Board. In Future, Shields Will Be Compatible With Both The Board That Uses The Avr, Which Operates With 5V And With The Due That Operates With 3.3V. The Second One Is A Not Connected Pin, That Is Reserved For Future Purposes. Stronger Reset Circuit..
We Strive To Put Our Hundred Percent To Meet Your Requirements And Try Our Best To Achieve Your Satisfaction!.
Friendly: The Board Is Easy To Use For Arduino Starter, It Contains Everything Needed To Support The Microcontroller; Simply Connect It To A Computer With A Usb Cable Or Power It With A Ac-To-Dc Adapter Or Battery To Get Started..
This Is Compatible Board With An Atmega328p And A Ch340g Serial Converter, 100% Compatible With Arduino Uno R3..
Features
- The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
- This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3.
- This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit.
- Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
- We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
See On Amazon #12
DIYmall USBASP Programmer 10 Pin AVR Downloader Flash Tool USB ISP Burn Bootloader 51 AVR ATMEGAA8 with USBASP 10 PIN to 6 PIN Adapter for Arduino Ender 3 Pro 5V/3.3V
Asin: B08F9QQQQD | Model: USBASP | PartNumber: USBASP
The Target Board Supports 5V And 3.3V Power Supply And Can Be Connected By Jumper Cap Connection..
Packing Includes: 2 X Usbasp + 2 X 10P Cable + 2 X Jumper Cap(Color By Randomly) + 2 X Usbasp 10 Pin To 6 Pin Adapter.
It Can Program Atmega328p, Ender 3 And Ender 3 Pro.
Works Under Multiple Platforms. Linux, Mac Os X And Windows.
Features
- Driver link: https://zadig(DOT)akeo(DOT)ie/, choose USBasp, Driver libsubK(v3.0.7.0) , you need click the drop-down menu to choose the correct driver
- Works under multiple platforms. Linux, Mac OS X and Windows
- The target board supports 5V and 3.3V power supply and can be connected by jumper cap connection.
- It can program ATMEGA328P, Ender 3 and Ender 3 Pro
- Packing Includes: 2 X USBASP + 2 X 10P Cable + 2 X Jumper Cap(Color by randomly) + 2 X USBASP 10 PIN to 6 PIN Adapter
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
Dimensions: 0.39 x 3.15 x 0.39 inches | Weight: 0.12 pounds
See On Amazon #13
ANBE AVR Programmer Kit AVRISP MKII Compatible AVR Microcontroller Programmer
Asin: B08WL96RD4 | Ean: 0759478473600 | UPC: 759478473600
Programs Both Flash And Eeprom. Supports Fuses And Lock Bit Programming. Adjustable Isp Programming Speed Up To 8M Frequency. Usb 2.0 Compliant (Full Speed, 12Mbps)..
Set Contents: 01 Avrisp Mkii Compatible Programmer, 01 Usb Cable, 01 Minimum Support Board, 01 Isp 6-10 Pin Adapter, 01 Support Board Manual..
This Is A Compatible Product Of Avrisp Mkii. Based On Avrisp Mkii Firmware. Upgradable To Support Future Devices. Supports Avr Studio 4/5/6/7 (Win10)..
Features
- A set of a programmer, a minimum support board and accessories for writing prorams on all AVR devices with ISP or PDI interface, XMEGA and certain 51 microcontrollers.
- This is a compatible product of AVRISP MKII. Based on AVRISP MKII firmware. Upgradable to support future devices. Supports AVR Studio 4/5/6/7 (Win10).
- Programs both Flash and EEPROM. Supports Fuses and Lock Bit Programming. Adjustable ISP programming speed up to 8M frequency. USB 2.0 compliant (full speed, 12Mbps).
- Set contents: 01 AVRISP MKII compatible programmer, 01 USB cable, 01 minimum support board, 01 ISP 6-10 pin adapter, 01 support board manual.
- See more on Amazon...
Brand: ANBE | Manufacturer: ANBE
See On Amazon #14
Geekstory USBtinyISP downloader AVR ISP Programmer microcontroller Bootloader USB Download with 6pin to 10pin Programming Cable for Arduino Meag2560
Asin: B0C1V1HLPK | Model: GR-1036 | PartNumber: GR-1036
★You Can Get 1 X Usb Tiny Isp Programmer(Isp Connector: 6-Pin And 10-Pin); 1 X 10 Pin Programming Cable; 1 X Usb Cable. Size: 28.8 * 61.6Mm. Module Net Weight: 16G..
★The Product Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory” To Em-Ail Us..
★Support With For Arduino Bootloader Burning Onto Atmega Chips, Power Led And Activity Led, 220 U Capacitor For Stable Process..
★Usb Power Supply, You Can Directly To Arduino To Provide Electricity, Open The Ide, Select The Bord Need To Download The Hardware Name, In The Burn Bootloader Select Usbtinyisp, That Is To Start Downloading Bootlaoder, 1-2 Minutes After The Download Is Complete..
Features
- USBtinyISP is designed for AVR, USBtinyISP is an ISP line download based on USB interface designed for AVR microcontrollers. It can be used to download programs for most AVR microcontrollers. The IDE is always compatible with the USBtinyISP download line, mainly used to download the bootloader.
- USB power supply, you can directly to Arduino to provide electricity, open the IDE, select the Bord need to download the hardware name, in the Burn Bootloader select USBtinyISP, that is to start downloading bootlaoder, 1-2 minutes after the download is complete.
- You can get 1 x USB Tiny ISP Programmer(ISP connector: 6-pin and 10-pin); 1 x 10 Pin Programming Cable; 1 x USB cable. Size: 28.8 * 61.6mm. Module Net Weight: 16g.
- SUPPORT with for Arduino bootloader burning onto Atmega Chips, Power LED and activity LED, 220 U Capacitor for stable process.
- The product documentation link cannot be displayed. If you need technical documentation, please click Geekstory to em-ail us.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #15
Geekstory for ATMEL 51 AVR USB ISP ASP Microcontroller Programmer Downloader with Cable + 10Pin to 6Pin Adapter Board for Ender 3 or Ender 3 Pro(Pack of 2)
Asin: B0CD7M4KQV | Model: GR0151X2+GR3382X2 | PartNumber: GR0151X2+GR3382X2
*Reserved Mosi, Miso, Ret, Sck, Vcc, Gnd. 6Pin Interface, User-Friendly Connection To The Target Board..
*The Avr Usb Isp Asp Microcontroller Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory”(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question” To Em-Ail Us..
*This Usbasp Programmer Only Supports Windows System. It Can Be Directly Connected To The Usb Interface Of The Computer, Which Is Very Convenient To Use. Driver Installation Is Required To Start The Usb To Isp..
*Set Programming Programming Interface, The User Can Upgrade The Downloader Firmware, Programming Is Very Convenient. This Product Can Be Used To Update Ender 3 Or Ender 3 Pro Firmware. Usp-Asp Support For Programming Chip: 51 Series: At89s51, At89s52, At89s53, At89s8252..
Features
- *This USBASP Programmer is using onboard ATMega8 chip. With power and programming two lights, the target board suopports 5V and 3.3V power supply New self-adaptive automatic speed control, the asp is the new version, with pin on JP2.
- *Set PROGRAMMING programming interface, the user can upgrade the downloader firmware, programming is very convenient. This product can be used to update Ender 3 or Ender 3 Pro firmware. USP-ASP support for programming chip: 51 Series: AT89S51, AT89S52, AT89S53, AT89S8252.
- *Reserved MOSI, MISO, RET, SCK, VCC, GND. 6PIN interface, user-friendly connection to the target board.
- *This USBASP Programmer only supports WINDOWS system. It can be directly connected to the USB interface of the computer, which is very convenient to use. Driver installation is required to start the usb to isp.
- *The AVR USB ISP ASP Microcontroller documentation link cannot be displayed. If you need technical documentation, please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to em-ail us.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #16
NOYITO USB ASP ISP AVR Programmer Downloader for ATMEL Proccessors Drive-Free Over-Current Protection Red & Blue bi-Color Indicator with Aluminum Shell
Asin: B07C3H3XF8 | Model: NOUSBASPPD | PartNumber: NOUSBASPPD | Ean: 0667797749354 | UPC: 667797749354
No 64K Program Limits! Perfect Support Win7 64-Bit.
Noyito Usbasp Downloader Test Software, Schematic, Driver Https://1Drv.Ms/U/S!Alzqucoyzqhkgwkmury6j2x2x1l7?E=B4ejmu.
Support S51 And Avr Chips, Faster Than The Parallel Port Isp, More Stable; Best Choice For Notebook, Computers Which Without Parallel Port . (S51 Series Can Not Be Burned And Downloaded With 3.3V)..
No Special Controllers Or Smd Components Are Needed..
Features
- Works under multiple platforms. Linux, Mac OS X and Windows are tested.
- No special controllers or smd components are needed.
- No 64K program limits! Perfect support WIN7 64-bit
- Support S51 and AVR chips, faster than the parallel port ISP, more stable; best choice for notebook, computers which without parallel port . (S51 series can not be burned and downloaded with 3.3v).
- NOYITO USBASP downloader test software, schematic, driver https://1drv.ms/u/s!AlzQUCOyZQhKgWKMUrY6J2X2x1l7?e=B4ejmU
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.31 x 1.77 x 0.59 inches | Weight: 0.06 pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #17
DEVMO 2PCS 5V Sensor Module Board Compatible with Ar-duino AVR PIC KY-008 Laser Transmitter Wave Length 650 nm
Asin: B07R45F1KY | Ean: 0741722788554 | UPC: 741722788554
★3 Pins Module.
★Package Includes: 2Pcs Sensor Module Board.
★With Fixed Bolt Hole For Easy Installation.
★Output Wavelength 650 Nm.
Features
- Operating voltage: 5V
- Output wavelength 650 nm
- 3 pins module
- With fixed bolt hole for easy installation
- Package Includes: 2PCS Sensor Module Board
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon #18
USB AVR Programmer w/ 6-Pin 10-Pin IDC ISP Connector for USBASP
Asin: B082HJ18KN | Model: PGM-AV0010FBA | PartNumber: PGM-AV0010FBA | Ean: 3810510026080, 3833090984953
Brand: MDFLY | Manufacturer: MDFLY
See On Amazon #19
Micro IC Pins Programming Clip for ISP program SOP/SOIC/TSSOP/TSOP/SSOP/MSOP/PLCC/QFP/TQFP/LQFP/SMD IC chip test pin mini chip adapter socket
Asin: B07P5BSWFH | Ean: 0703064869148 | UPC: 703064869148
Qfp Qfn Package Programming Clip.
Ic Pin Tip Clip For Jtag.
Plcc Smd Package Tip Micro Clip.
Soic Sop Tsop Programming Clip.
Features
- Micro clip ISP programming
- SOIC SOP TSOP programming clip
- QFP QFN package programming clip
- PLCC SMD package tip micro clip
- IC pin tip clip for JTAG
- See more on Amazon...
Brand: ANDK | Manufacturer: Shenzhen HongYi Electronic Technology Co., Ltd
Weight: 0.07 pounds
See On Amazon
Looking For Something Else?
Search