LoRa32u4 II Lora Development Board Module LiPo SX1276 HPD13 915MHZ with Antenna for Arduino DIYmall
Asin: B075TXGNGR | Model: DIY0051N+FZ2865 | PartNumber: DIY0051N+FZ2865
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3.3V Regulator With 500Ma Peak Current Output.
What You Will Get : 1 X Lora32u4 Ii 915Mhz Board + 1 X Antenna + 1 X Jst-Ph2.0Mm-2P Cable.
Built In 100Ma Lipoly Charger With Charging Status Indicator Led, Interface Is 2.0Mm Male.
Atmega32u4 @ 8Mhz With 3.3V Logic/Power.
Features
- Document link https://github(DOT)com/BSFrance/BSFrance-avr
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- Built in 100mA lipoly charger with charging status indicator LED, interface is 2.0mm male
- What you will get : 1 X LORA32U4 II 915MHZ Board + 1 X Antenna + 1 X JST-PH2.0MM-2P Cable
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
See On Amazon Similar To LoRa32u4 II Lora Development Board
#1
DIYmall 2 Sets 915MHZ ESP32 Lora V3 WiFi+BLE Development Board 0.96inch OLED Display ESP32-S3 Dual-core SX1262 Type-C Lora Kit for Arduino NodeMCU IoT
Asin: B08629526P | Model: FZ2886-AX2K | PartNumber: FZ2886-AX2K
The Mcu Is Different, So The Definitions Of V2 And V3 Gpio Pins Are Different.
What You Will Get: 2 X Esp32 Lora V3 Development Board + 2 X 915Mhz Antenna + 2 X Jst 1.25Mm-2P Connector Cable + 2.54 Pin (No Welding) + 2 X Protective Case For Lora Board.
When You Use Esp32 Oled Lora, You Need To Use 2Pcs Together. One Is Used For Receiving And Another For Sending.
It Is The Best Option For Smart Cities, Farms, Homes, Industrial Control, House Security, Wireless Meter Reading, And Iot Developers.
Upgraded V3 Version Has Better Impedance Matching Of Rf Circuits.
Mcu: Esp32-S3fn8 (V2 Is Esp32-D0wdq6), Lora Chip: Sx1262(V2 Is Sx1276/8), Usb Socket: Type-C(V2 Is Micro-Usb).
Features
- WiFi LoRa 32 is a classic IoT dev-board. The newly launched V3 version retains Wi-Fi, BLE, LoRa, OLED display, and other functions
- MCU: ESP32-S3FN8 (V2 is ESP32-D0WDQ6), LoRa Chip: SX1262(V2 is SX1276/8), USB Socket: Type-C(V2 is Micro-USB)
- The MCU is different, so the definitions of V2 and V3 GPIO pins are different
- Upgraded V3 version has better impedance matching of RF circuits
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
- What you will get: 2 X ESP32 Lora V3 development board + 2 X 915MHz Antenna + 2 X JST 1.25mm-2P Connector cable + 2.54 pin (no welding) + 2 X Protective Case for lora board
- See more on Amazon...
Brand: DIYmall | Manufacturer: Heltec Automation Technology Co., Ltd
Dimensions: 0.38 x 1.97 x 1.00 inches
See On Amazon #2
REYAX RYLR896 Lora Module SX1276 UART 868MHz 915MHz Antenna at Command FCC NCC
Asin: B07NB3BK5H | Model: RYLR896 | PartNumber: RYLR896 | Ean: 0644824865713, 0755874948070 | UPC: 755874948070, 644824865713
Features
- It is recommended to purchase RYLS135 USB to UART Bridge for your convenience in testing. https://www.amazon.com/dp/B0BP1PDPGL
- See more on Amazon...
Brand: REYAX | Manufacturer: REYAX
Dimensions: 0.22 x 1.67 x 0.72 inches | Weight: 0.01 pounds
See On Amazon #3
DIYmalls 915 ESP32 LoRa OLED Board V3 Type-C SX1262 + 915MHz LoRa Antenna U.FL IPEX to SMA for Arduino IOT LoraWan Gateway, not Compatible with LoRa 32 V2
Asin: B086ZFCV7F | Ean: 0747356634250 | UPC: 747356634250
You Will Receive, 1Pcs 915Mhz Esp32 Lora V3, 1Pcs 915Mhz Lora Antenna,And 1Pcs 2Pin 1.25Mm Connector..
Lora 32 V2 Use Esp32-D0wdq6 Mcu, But The V3 Is Esp32-S3fn8, So Pinout Is Different. The Apis Used With The Libraries Are Different, So Programs Written For V2 Do Not Compile V3..
Support Type-A To Type-C Cable Only, Not Type-C To Type-C Cable..
Lora V3 Board Are An Improvement Over The V2 Version, But They Are Not A Replacement..
When You Use Lora Esp32 915Mhz, You Need To Use 2Pcs Together,One Receiving And Another Sending..
Features
- This LoRa board comes unassembled, soldering is required, not equipped with lithium battery.
- When you use lora esp32 915MHz, you need to use 2pcs together,one receiving and another sending.
- You will receive, 1pcs 915MHz esp32 lora V3, 1pcs 915mhz lora antenna,and 1pcs 2pin 1.25mm connector.
- LoRa V3 board are an improvement over the V2 version, but they are not a replacement.
- LoRa 32 V2 use ESP32-D0WDQ6 MCU, but the V3 is ESP32-S3FN8, so pinout is different. The APIs used with the libraries are different, so programs written for V2 do not compile V3.
- Support type-A to type-C cable only, not type-C to type-C cable.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Weight: 0.05 pounds
See On Amazon #4
DIYmalls 915MHz LoRa Antenna U.FL IPEX to SMA Connector Pigtail 2dBi for ESP32 Lora OLED CubeCell Board IOT (Pack of 4)
Asin: B086ZG5WBR | Ean: 0747356634267 | UPC: 747356634267
-915 Lora Antenna Is Good For Lora End Devices For The Us915 Band, Development Or Testing Purposes In The Lab..
-Connector Type: Ipex. Band Definition: 915Mhz, Pls Check Picture.
-Lora Antenna 915Mhz Can Be Used For Esp32 Oled 915 Lora Board, And Htcc-Ab02s Lora Gps Module.
-915 Antenna Widely Used With 915Mhz Cubecell Board, Htcc-Ab02s Lora Gps, Lora32u4 Ii Etc.
Features
- -You will receive 4pcs lora antenna 915mhz.
- -915 antenna widely used with 915mhz cubecell board, htcc-ab02s lora gps, LoRa32u4 II etc
- -915 lora antenna is good for LoRa end devices for the US915 band, development or testing purposes in the lab.
- -lora antenna 915mhz can be used for esp32 oled 915 lora board, and htcc-ab02s lora gps module
- -Connector type: ipex. Band definition: 915MHz, pls check picture
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.30 x 3.10 x 0.70 inches
See On Amazon #5
DIYmalls 915MHz LoRa ESP32 OLED Board V3 Type-C SX1262 8MB Flash + LoRa Antenna U.FL IPEX to SMA for Arduino LoraWan IOT (Pack of 2), not Compatible with LoRa 32 V2
Asin: B086ZG25DZ | Ean: 0747356634243 | UPC: 747356634243
-Lora Board 915Mhz Comes Unassembled, Soldering Required By You, Not Equipped With Lithium Battery..
-If You Want To Use The Lora 32 V3 Board With Case, Please Buy Another Smaller 915 Lora Antenna Because This Lora 915 Antenna Is Bigger Than The Lora Case..
-You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, Type C 5V Power Is Recommended..
-The Newly Lora V3 Version Has The Same Pin Sequence And Function As The V2 Version. But The V3 Change Micro Usb Port To Be Type C..
Features
- -You will receive, 2pcs 915MHz esp32 lora V3, 2pcs 915mhz lora antenna,and 2pcs 2pin 1.25mm connector.
- -The newly LoRa V3 version has the same pin sequence and function as the V2 version. But the V3 change micro USB port to be type C.
- -LoRa board 915mhz comes unassembled, soldering required by you, not equipped with lithium battery.
- -You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.
- -If you want to use the lora 32 v3 board with case, please buy another smaller 915 lora antenna because this lora 915 antenna is bigger than the lora case.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.80 x 1.90 x 1.20 inches | Weight: 0.10 pounds
See On Amazon #6
HiLetgo ESP32 LoRa V3 SX1262 0.96 inch OLED Display Development Board WiFi Bluetooth Dual Core 240MHz CP2102 and 433-510MHz Antenna for Arduino Smart WiFi LoRa 32(Unsoldered)
Asin: B07FYWFH4C | Model: 8541612537 | PartNumber: 8541612537
Type-C Usb Interface With A Complete Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding, And Other Protection Measures..
Integrated Cp2102 Usb To Serial Port Chip,.
Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System.
Sx1262 Lora Node Chip..
Features
- Microprocessor: ESP32-S3FN8dual-core processor, frequency up to 240 MHz
- SX1262 LoRa node chip.
- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
- Onboard SH1.25-2 battery interface, integrated lithium battery management system
- Integrated CP2102 USB to serial port chip,
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.07 pounds
See On Amazon #7
HiLetgo ESP32 V3 LoRa V3 SX1262 0.96 inch OLED Display Development Board WiFi Bluetooth Dual Core 240MHz CP2102 and 863-928MHz Antenna for Arduino Smart Home WiFi LoRa 32(Unsoldered)
Asin: B07WHRS2XG | Model: 3-01-1496 | PartNumber: 3-01-1496
Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System.
Integrated Cp2102 Usb To Serial Port Chip, Convenient For Program Downloading, And Debugging Information Printing..
Onboard 0.96-Inch 128*64 Dot Matrix Oled Display.
Sx1262 Lora Node Chip..
Features
- Microprocessor: ESP32-S3FN8 dual-core processor, frequency up to 240 MHz
- SX1262 LoRa node chip.
- Onboard SH1.25-2 battery interface, integrated lithium battery management system
- Onboard 0.96-inch 128*64 dot matrix OLED display
- Integrated CP2102 USB to serial port chip, convenient for program downloading, and debugging information printing.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
868MHz 915MHz WiFi LoRa 32 V3 Module Development Board Type-C SX1262 Integrated WiFi Bluetooth - ESP32 0.96 inch OLED Display 8MB Flash IOT Lora Dev-Board + Antenna U.FL IPEX to SMA 915MHz
Asin: B07HD1CRPD | Ean: 0747356632119 | UPC: 747356632119
🚩 8Mb Memory Storage Capacity.
🚩 Comes With One U.Fl Ipex To Sma Connector Lora Antenna.
🚩 Type-C Usb Interface With A Complete Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding, And Other Protection Measures.
🚩 Frequency: 863~928Mhz; Wi-Fi: 802.11 B/G/N, Up To 150Mbps.
Features
- WiFi LoRa 32 is a classic IoT development board, V3 version, integrated Wi-Fi, BLE, LoRa, 0.96 inch OLED display and other functions. Not Compatible with LoRa 32 V2.
- Frequency: 863~928MHz; Wi-Fi: 802.11 b/g/n, up to 150Mbps
- 8MB Memory Storage Capacity
- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures
- Comes with one U.FL IPEX to SMA Connector LoRa Antenna
- See more on Amazon...
Brand: Stemedu | Manufacturer: Stemedu/Heltec Automation Technology Co., Ltd
See On Amazon #9
EC Buying ESP32 Wireless Stick Development Board LoRa Module SX1262 LoRaWAN BLE 863~928 WiFi LoRa Bluetooth-Compatible 0.49" OLED Display for Arduino
Asin: B0CB41982Z
Type-C Usb Interface With A Complete Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding, And Other Protection Measures.
Integrated Cp2102 Usb To Serial Port Chip, Convenient For Program Downloading, And Debugging Information Printing.
Onboard 0.49-Inch 128*64 Dot Matrix Oled Display, Which Can Be Used To Display Debugging Information, Battery Power, And Other Information.
Integrated Wifi, Lora, Bluetooth Three Network Connections, Onboard Wi-Fi, Bluetooth Dedicated 2.4Ghz Metal Spring Antenna, Reserved Ipex (U.Fl) Interface For Lora Use.
Features
- Microprocessor: ESP32-S3FN8 (Xtensa 32-bit LX7 dual core processor, five stage pipeline rack Structure, main frequency up to 240 MHz)
- Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa use
- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures
- Onboard 0.49-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power, and other information
- Integrated CP2102 USB to serial port chip, convenient for program downloading, and debugging information printing
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
Dimensions: 0.32 x 2.29 x 0.89 inches
See On Amazon #10
2 Sets Esp32 Lora V3 915mhz WiFi+BLE Development Board Kit 0.96inch OLED Display SX1262 + Lora V3 case +824-960MHz Antenna for Arduino NodeMCU IoT
Asin: B0CW9SP6LR
3. Enhanced User Experience: Features A 0.96-Inch Oled Display For Easy Debugging And Real-Time Information Display, Enhancing User Interaction And Convenience.
5. Simplified Development: Compatible With The Arduino Development Environment And Equipped With A Cp2102 Usb To Serial Port Chip For Easy Program Downloading And Debugging, Streamlining The Development Process For Users.
4. Reliable Protection: Incorporates Comprehensive Protection Measures Including Voltage Regulation, Esd Protection, Short Circuit Protection, And Rf Shielding, Ensuring Device Safety And Longevity.
2. Versatile Connectivity: Seamlessly Integrates Wifi, Lora, And Bluetooth Connections, Offering Extensive Networking Options For Diverse Applications.
Features
- 1. Powerful Processing: Equipped with an ESP32-S3FN8 microprocessor featuring a dual-core Xtensa LX7 architecture running at frequencies up to 240 MHz, delivering robust computational capabilities
- 2. Versatile Connectivity: Seamlessly integrates WiFi, LoRa, and Bluetooth connections, offering extensive networking options for diverse applications
- 3. Enhanced User Experience: Features a 0.96-inch OLED display for easy debugging and real-time information display, enhancing user interaction and convenience
- 4. Reliable Protection: Incorporates comprehensive protection measures including voltage regulation, ESD protection, short circuit protection, and RF shielding, ensuring device safety and longevity
- 5. Simplified Development: Compatible with the Arduino development environment and equipped with a CP2102 USB to serial port chip for easy program downloading and debugging, streamlining the development process for users
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Dimensions: 0.40 x 1.98 x 1.00 inches
Warranty: NO
See On Amazon #11
HiLetgo ESP32 SX1262 LoRa Kit 863-928MHz Bluetooth 4.2+WiFi+LoRa LoRaWAN Wireless Communication Development Board with 0.49" OLED Display 64M Bits Flash Works with Arduino IDE Type C
Asin: B07S5XLP6Q | Model: 3-01-1515 | PartNumber: 3-01-1515
Microprocessor: Esp32 (Dual-Core 32-Bit Mcu + Ulp Core), With Lora Node Chip Sx1262;.
Integrated Wifi, Lora, Bluetooth Three Network Connections, Onboard Wi-Fi, Bluetooth Dedicated 2.4Ghz Metal 3D Antenna, Reserved Ipex (U.Fl) Interface For Lora Use;.
Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System (Charge And Discharge Management, Overcharge Protection, Battery Power Detection, Usb / Battery Power Automatic Switching);.
Esp32 Sx1262 Lora Kit With Type - C Interface.
Features
- ESP32 SX1262 LoRa Kit 863-928MHz Bluetooth 4.2+WiFi+LoRa LoRaWAN Wireless
- ESP32 SX1262 LoRa Kit with Type - C Interface
- Microprocessor: ESP32 (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1262;
- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
- Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal 3D antenna, reserved IPEX (U.FL) interface for LoRa use;
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.31 x 2.36 x 0.91 inches
See On Amazon #12
waveshare SX1262 LoRa HAT for Raspberry Pi 915MHz Frequency Band Data Transmission up to 5km Support Auto Repeating to Transmit Longer Wake on Radio Wireless Config Carrier Sensing Communication Key
Asin: B0822Z3CX8 | Model: SX1262 915M LoRa HAT Raspberry Pi | PartNumber: SX1262 915M LoRa HAT Raspberry Pi | Ean: 0778365986832 | UPC: 778365986832
Features: Standard Raspberry Pi 40Pin Gpio Extension Header, Supports Raspberry Pi Series Boards.Onboard Cp2102 Usb To Uart Converter, For Serial Debugging.Brings The Uart Control Interface, For Connecting Host Boards Like Arduino/Stm32.4X Led Indicators, Easy To Check The Module Status..
Supports Lbt, Monitoring The Signal Channel Noise Before Transmitting, Greatly Improves The Success Ratio Under Extreme Environment. Supports Rssi Signal Intensity Indicating, For Evaluating Signal Quality, Tuning The Network. Supports Wireless Parameter Configuration, By Sending Wireless Command/Data Packet, Remotely Configure Or Retrieve The Module Parameter. Supports Fixed-Point Transmission, Broadcast, Signal Channel Monitor..
Features:Lora Spread Spectrum Modulation Technology, Up To 81 Available Signal Channel, Longer Communication Distance, More Robust To Interference.Auto Multi-Level Repeating, Suit For Ultra Long Range Communication, Allows Multi Network On The Same Region.Low Power Consumption Features Like Deep Sleeping And Wake On Radio, Ideal For Battery-Powered Applications.Customizable Communication Key Which Won't Be Retrieved, Greatly Improves The Security Of User Data..
Comparing With Normal Lora Modules, The Sx1262 Lora Hat Achieves Longer Communication Distance, Higher Rate, Lower Consumption, Better Safety And Anti-Interference. It Is Suitable For Various Applications Such As Industrial Control, Smart Home, Data Collection, Etc..
Features
- This is a SX1262 LoRa HAT for Raspberry Pi, 915MHz Frequency Band, for America, Oceania, Asia.It allows data transmission up to 5km through serial port.By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
- Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.
- Features: Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.Onboard CP2102 USB TO UART converter, for serial debugging.Brings the UART control interface, for connecting host boards like Arduino/STM32.4x LED indicators, easy to check the module status.
- Features:LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference.Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region.Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications.Customizable communication key which won't be retrieved, greatly improves the security of user data.
- Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment. Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network. Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter. Supports fixed-point transmission, broadcast, signal channel monitor.
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #13
LILYGO LoRa32 915Mhz ESP32 Development Board OLED 0.96 Inch SD Card BLE WiFi TTGO Paxcounter Module
Asin: B09SHRWVNB | Model: 868mhz | PartNumber: 868mhz
【Advantage】In Terms Of The Power Switch, We Have Changed The Switching Interaction Mode,Sma Antenna Can Enhance Signal Transmission.
【Data Transmission】Data Can Either Be Be Stored On A Local Sd-Card, Transferred To Cloud Using Lora Wan Network Or Mqtt Over Tcp/Ip, Or Transmitted To A Local Host Using Serial (Spi) Interface.
【Paxcounter】Paxcounter Is An Esp32 Mcu Based Device For Metering Passenger Flows In Realtime. It Counts How Many Mobile Devices Are Around. This Gives An Estimation How Many People Are Around.
【Feature】Add The Sma And Tp4054 To The Board,Which Make It Can Do More Things.
Features
- Github github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series
- Feature Add the SMA and TP4054 to the board,which make it can do more things
- Advantage In terms of the power switch, we have changed the switching interaction mode,SMA antenna can enhance signal transmission
- Paxcounter Paxcounter is an ESP32 MCU based device for metering passenger flows in realtime. It counts how many mobile devices are around. This gives an estimation how many people are around
- Data transmission Data can either be be stored on a local SD-card, transferred to cloud using LoRa WAN network or MQTT over TCP/IP, or transmitted to a local host using serial (SPI) interface
- See more on Amazon...
Brand: LILYGO | Manufacturer: LILYGO
Dimensions: 1.57 x 1.97 x 3.15 Inches
See On Amazon #14
DIYmalls 915MHz LoRa ESP32 OLED Board V3 Type-C SX1262 + LoRa Antenna IPX 2dBi for Arduino LoRawan IOT (Pack of 2), not Compatible with LoRa V2
Asin: B09VDJJTDB
When You Use Lora Esp32 915Mhz, You Need To Use 2Pcs Together,One Receiving And Another Sending..
If You Have Any Problem, Please Do As Follow: Click " Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
To Make Lora Esp32 Board Work Better, That Would Be Great If You Power Via On-Board Type-C Port 5V.
You Will Receive 2Pcs 915Mhz Esp32 Lora Oled Board V3, 2Pcs 915Mhz Lora Antenna,And 2Pcs 1.25Mm Cable..
Features
- LoRa board 915mhz comes unassembled, soldering required by you, not equipped with lithium battery.
- You will receive 2pcs 915MHz esp32 lora oled board V3, 2pcs 915mhz lora antenna,and 2pcs 1.25mm cable.
- When you use lora esp32 915MHz, you need to use 2pcs together,one receiving and another sending.
- To make lora esp32 board work better, that would be great if you power via on-board type-C port 5V
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #15
LILYGO T3S3 ESP32-S3 LoRa TTGO Development Board Wireless Module with 0.96 Inch OLED Display
Asin: B0BW5W9QXZ
【Esp32】It Is Also Equipped With The Esp32 Main Control Chip, Which Supports Tf Cards.
【Product Service】: If You Have Any Questions Or Suggestions About The Product, Please Feel Free To Contact Us. We Will Answer Your Question As Soon As Possible.
【Github】Github.Com/Xinyuan-Lilygo/Lilygo-Lora-Series/Tree/Master/Examples/Radiolibexamples/Sx1280.
【Lora】The T3s3 Is Equipped With Sx1262 Lora Module, Which Supports The Lora 2.4G Band And Supports Global Use.
Features
- MCU ESP32S3FH4R2
- LoRa The T3S3 is equipped with SX1262 LoRa module, which supports the LoRa 2.4G band and supports global use
- ESP32 It is also equipped with the ESP32 main control chip, which supports TF cards
- Github github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/tree/master/examples/RadioLibExamples/SX1280
- Product service : If you have any questions or suggestions about the product, please feel free to contact us. We will answer your question as soon as possible
- See more on Amazon...
Brand: LILYGO | Manufacturer: LILYGO
Dimensions: 1.06 x 3.45 x 2.60 inches
See On Amazon #16
LoRa Antenna Pigtail 915MHz 2dBi U.FL IPEX to SMA Connector for ESP32 Lora OLED CubeCell Board IOT Internet of Things (Pack of 4)
Asin: B07LCKNN4H | Model: 8541545929 | PartNumber: 8541545929 | Ean: 0747356629195 | UPC: 747356629195
-915 Antenna Widely Used With 915Mhz Cubecell Board, Htcc-Ab02s Lora Gps, Lora32u4 Ii Etc.
-Standing Wave Ratio: < = 1.5 ; Gain: 2Dbi ;Maximum Power: 10W ;Input Impedance: 50Ω.
-Connector Type: Ipex. Band Definition: 915Mhz, Pls Check Picture.
-Lora Antenna Can Be Used For Esp32 Oled 915 Lora Board,Htcc-Ab02s Lora Gps..
Features
- -915 lora antenna is good for LoRa end devices for the US915 band, development or testing purposes in the lab.
- -lora antenna can be used for esp32 oled 915 lora board,htcc-ab02s lora gps.
- -915 antenna widely used with 915mhz cubecell board, htcc-ab02s lora gps, LoRa32u4 II etc
- -Connector type: ipex. Band definition: 915MHz, pls check picture
- -Standing wave ratio: < = 1.5 ; Gain: 2dBi Maximum power: 10W Input impedance: 50
- See more on Amazon...
Brand: NEXTION | Manufacturer: DIYmalls
Dimensions: 0.12 x 1.22 x 0.28 inches
See On Amazon #17
Comimark 2Pcs LoRa SX1278 Long Range RF Wireless Power Mental Module SX1276 5Km for Arduino
Asin: B07W6ZPH7D | Model: LY369 | PartNumber: LY369 | Ean: 0657835676841 | UPC: 657835676841
Ism Multi-Band, No Need To Apply For Frequency Free Use..
If You Are Not Satisfied With Your Purchase For Any Reason, Please Feel Free To Contact Us At The Buyer Center Or Support Email, 24/7 Quick Reply..
Package Included: 2 X Transceiver Module.
Super Anti-Jamming (Channel Rejection Ratio: 56Db)..
Features
- Using FSK / GFKS technology and LoRa (remote) spread spectrum technology.
- Super anti-jamming (channel rejection ratio: 56db).
- ISM multi-band, no need to apply for frequency free use.
- Package included: 2 x Transceiver Module
- If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply.
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon #18
2 Sets 0.96 inch OLED WiFi Esp32 Lora V3 Development Board Type-C USB SX1262 Lora Module Integrated WiFi Bluetooth 868MHZ 915MHZ + IPX IPEX 1.13 UF.L Antennas + Cases
Asin: B0CWQ6TP4B
🚩 Esp32-S3fn8 Dual Core Processor.
🚩 You Will Get: 2 X Wifi Lora Esp32 V3 Development Boards, 2 X Plastic Protect Cases, 2 X 868Mhz 915Mhz Gsm Ipx Ipex 1.13 Uf.L Antennas.
🚩 Type-C Usb Interface.
🚩 Frequency: 863~928Mhz; Wi-Fi: 802.11 B/G/N, Up To 150Mbps.
Features
- WiFi LoRa 32 is a classic IoT development board, Integrated Wi-Fi, BLE, LoRa, OLED display and other functions.
- Frequency: 863~928MHz; Wi-Fi: 802.11 b/g/n, up to 150Mbps
- ESP32-S3FN8 dual core processor
- Type-C USB Interface
- You will get: 2 X WiFi LoRa ESP32 V3 Development boards, 2 x Plastic Protect Cases, 2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Antennas
- See more on Amazon...
Brand: Stemedu | Manufacturer: Stemedu
See On Amazon #19
DIYmall Lora32 V3 Kit ESP32 S3 WiFi+BT Development Board 0.96inch OLED Display SX1262 CP2102 with 915MHZ Antenna Transceiver for Arduino ESP8266 NodeMCU IOT (Pack of 2)
Asin: B0781CPHT1 | Model: FZ2886-A+FZ2899+FZ2891 | PartNumber: FZ2886-A+FZ2899+FZ2891
When You Use Esp32 Oled Lora, You Need To Use 2Pcs Together. One Is Used For Receiving And Another For Sending.
What You Will Get: 2 X Esp32 Lora V3 Oled Development Board + 2 X 915Mhz U.Fl Ipex To Sma Connector Antenna + 2 X Jst 1.25Mm-2P Connector + 2.54 Pin (No Welding).
Application: Smart Cities, Farms, Homes, Industrial Control, House Security, Wireless Meter Reading, And Iot Developers.
Mcu: Esp32-S3, Lora Chip: Sx1262, Usb Socket: Type-C.
Features
- Wi-Fi + BLE + LoRa + OLED display classic IoT dev-board
- MCU: ESP32-S3, LoRa Chip: SX1262, USB Socket: Type-C
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- Application: smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
- What you will get: 2 X ESP32 Lora V3 OLED development board + 2 X 915MHz U.FL IPEX to SMA Connector Antenna + 2 X JST 1.25mm-2P Connector + 2.54 pin (no welding)
- See more on Amazon...
Brand: DIYmall | Manufacturer: Heltec Automation Technology Co., Ltd
Weight: 0.03 Pounds
See On Amazon #20
MakerFocus LoRa SX1262 Module 863 928 MHZ LoRaWAN IoT Development Board ASR6502 MCU 128KB Flash Ultra Low Power Consumption Solar Energy Powered Design with Antenna for Arduino and Intelligent Scene
Asin: B07ZHCMFW4 | Model: HBIHBS-22 | PartNumber: HBIHBS-22
Perfect Circuit Design: Based On Asr6502, Integrated Cp2102 Usb To Serial Port Chip, Convenient For Program Downloading, Debugging Information Printing.
Excellent Feature: Perfectly Compatible With Arduino; Good Impedance Matching And Long Communication Distance. Wide Range Of Application Scenarios - Smart Agriculture, Scenic Area Management, Industry 4.0, Urban Lighting.
Strongest Protection: Type C Interface With Complete Esd Protection,Short Circuit Protection, Rf Shielding,And Other Protection Measures.
Ultra Low Power Design: 3.5Ua In Deep Sleep. Onboard Solar Energy Management System, Can Directly Connect With A 5.5~7V Solar Panel; Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System (Charge And Discharge Management,Overcharge Protection,Battery Power Detection,Usb/Battery Power Automatic Switching).
Features
- LoRa Dev Board: Friendly designed for developers, easy to verify communication solutions
- Ultra Low Power Design: 3.5uA in deep sleep. Onboard solar energy management system, can directly connect with a 5.5~7V solar panel; Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management,overcharge protection,battery power detection,USB/battery power automatic switching)
- Perfect Circuit Design: Based on ASR6502, integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
- Strongest Protection: Type C interface with complete ESD protection,short circuit protection, RF shielding,and other protection measures
- Excellent Feature: Perfectly compatible with Arduino; good impedance matching and long communication distance. Wide range of application scenarios - Smart Agriculture, Scenic Area Management, Industry 4.0, Urban Lighting
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.30 x 1.60 x 0.90 inches
Warranty: No Warranty
See On Amazon
Looking For Something Else?
Search