Frontpage > Product > Dct Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24In / 62Cm Circular, Rota...

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24in / 62cm Circular, Rotary, Jig, Router

Asin: B0763TK5WV   |   Model: 9114   |   PartNumber: 9114   |   Ean: 0688295879114   |   UPC: 688295879114


As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

Built To Last: Constructed With An Aluminum Body And Reinforced With Integral Tube Running The Length Of The Wide Body For Maximum Rigidness And Lightweight Handling; Wide And Tall Hard Plastic Jaws Hold Work Piece Securely And Are Predrilled For Accessory; When Clamped, This Solid Guide Shows No Play And It Tightly Holds Its Grip.
Easy To Use: There Are Two Clamps That Hold The Wood – A Stationery Clamp On The End With Lever And A Sliding Clamp That Moves Along The Rail; To Adjust, Pull The Sliding Clamp Apart Until You Hear A Click, Adjust The Clamp To The Wood, Hold The Clamp Against The Wood And Push The Other Part Of The Clamp Towards The Wood Until It Locks, Make Sure The Stationary Clamp Has The Handle In The Upward Position When Adjusting And Push The Lever Down To Lock Into Place.
Wide Range: Scale Includes Both Inches And Centimeter Measurements And Is Adjustable To Work Over The Full Range Up To 24 Inches/62Cm; T-Track On Guide Accepts Standard Accessories Including All Pro Grip Accessories And Also Allows Complete Flexibility When Designing Specialty Fixtures In Your Shop; Low Profile And Flat Top Easy On A Rotary Saw, Jig Saw, Circular Table Saw, Router Straight Cut, Or Joiner Cut.
All-In-One: You Get A Smooth, Straight Edge And A Woodworking Self-Clamping Tool In One Handy Unit So You Can Stack Glue Panels Without Worrying About Them Tipping And Crashing To The Floor; 30.5” X 2.1” X 0.5” Inches (77.5Cm X 5.3Cm X 1.3Cm) Overall Dimensions (Stands 1.1 Inches/2.8Cm Tall) With 2.5” X 1” X 0.25” Inch (6.4Cm X 2.5Cm X 0.6Cm) Clamp.

Features

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24 Inch / 62cm Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor; 30.5 x 2.1 x 0.5 inches (77.5cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5 x 1 x 0.25 inch (6.4cm x 2.5cm x 0.6cm) clamp
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling; Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory; When clamped, this solid guide shows no play and it tightly holds its grip
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 24 inches/62cm; T-track on guide accepts standard accessories including all Pro Grip accessories and also allows complete flexibility when designing specialty fixtures in your shop; Low profile and flat top easy on a rotary saw, jig saw, circular table saw, router straight cut, or joiner cut
  • EASY TO USE: There are two clamps that hold the wood a stationery clamp on the end with lever and a sliding clamp that moves along the rail; To adjust, pull the sliding clamp apart until you hear a click, adjust the clamp to the wood, hold the clamp against the wood and push the other part of the clamp towards the wood until it locks, make sure the stationary clamp has the handle in the upward position when adjusting and push the lever down to lock into place
  • See more on Amazon...

Brand: Deadwood Crafted Tools   |   Manufacturer: Deadwood Crafted Tools

Dimensions: 3.20 x 1.50 x 33.50 inches   |   Weight: 2.27 Pounds

Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

Amazon Price: $35.19 | as of 05/09/2024 (3:52pm pst) *DETAILS
Availability: In Stock
Used Price: $36.26

See On Amazon




Similar To DCT Aluminum Pro Grip Clamp

  #1

IRWIN QUICK-GRIP 1964758 One-Handed Mini Bar Clamp 4 Pack, 6"

Asin: B001DSY4QO   |   Model: 1964758   |   PartNumber: 1964758   |   Ean: 0038548022277   |   UPC: 038548022277

Sturdy: Resin Construction With Hardened Steel Bars To Prevent Flexing And Bending.
High-Carbon Steel Is Durable For Long Life Where High Accuracy And Tolerance Is Not Critical, Especially Important With Hand Use.
25% Smaller Than Regular Irwin Tools Vise-Grip Irwin Tools Quick-Grip Clamps For Smaller Projects Or For Working In Confined Spaces.
Easy-To-Use: Ideal For Clamping Smaller Workpieces And Working In Confined Areas.
Patented Pistol Grip Design Enhances Comfort And Ease Of Use. Exerts Up To 150 Lbs. Of Clamping Pressure.
140Lbs Of Force: Keep Your Workpiece Together And Evenly Distribute 150Lbs. Of Force.
Backed By The Irwin Lifetime Guarantee. Made In The Usa From Global Components.
Quick-Grip Design: One-Handed Triggers Release The Clamps Instantly.

Features

  • NON-MARRING PADS: Grip firmly and protect your workpiece from scratches and scuffs
  • QUICK-GRIP DESIGN: One-handed triggers release the clamps instantly
  • STURDY: Resin construction with hardened steel bars to prevent flexing and bending
  • 140LBS of force: Keep your workpiece together and evenly distribute 150LBS. of force
  • EASY-TO-USE: Ideal for clamping smaller workpieces and working in confined areas
  • Patented pistol grip design enhances comfort and ease of use. Exerts up to 150 lbs. of clamping pressure
  • High-carbon steel is durable for long life where high accuracy and tolerance is not critical, especially important with hand use
  • 25% smaller than regular IRWIN Tools VISE-GRIP IRWIN Tools QUICK-GRIP clamps for smaller projects or for working in confined spaces
  • Backed by the IRWIN lifetime guarantee. Made in the USA from global components
  • See more on Amazon...

Brand: IRWIN   |   Manufacturer: IRWIN

Dimensions: 2.50 x 21.00 x 8.00 inches   |   Weight: 1.00 pounds

Warranty: Full Lifetime Guarantee - Each IRWIN hand tool is warranted to be free from defects in material and workmanship for the life of the tool under normal wear and tear, except for damage caused by misuse or alteration.

Amazon Price: $19.40 ($4.85 / Count) | as of 05/09/2024 (3:52pm pst) *DETAILS
Used Price: $18.73 ($4.68 / Count)

See On Amazon




  #2

Nilight 90020B 2 Pack Mounting Bracket Kit LED Off Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder, 2 Years Warranty,Black

Asin: B0714CYKBJ   |   Model: 90020B   |   PartNumber: 90020B   |   Ean: 0600537016590   |   UPC: 600537016590

Wide Application: Can Be Used On Tubes Of 1", 1-1/2", 1-3/4" & 2" In Diameter And Applied To Led Light Bar For Almost All Kinds Of Vehicle.
Package Includes: 2Pcs Led Light Bar Mounting Bracket. 2 Years Warranty Honored By Nilight..
Easy Installation: Pre-Drilled Hole, Allows More Lights To Be Added To Vehicle Without Drilling, Allen Hex Key Included For Quick Installation.
Useful Rubber: High Quality Rubber Inserts Dampen Driving Vibration And Avoid Scraping Bull Bar Surface. Simplifies The Installation Of Nilight Off Road Led Light Bars Onto The Roof Rack, Roll Cages Bull Bar Or Head Rack Of Your Atv, Utv And Trucks.

Features

  • Sturdy bracket: Strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving
  • Useful rubber: High quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Simplifies the installation of Nilight off road LED light bars onto the roof rack, roll cages bull bar or head rack of your ATV, UTV and trucks
  • Wide application: Can be used on tubes of 1, 1-1/2, 1-3/4 & 2 In diameter and applied to LED light bar for almost all kinds of vehicle
  • Easy installation: Pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation
  • Package includes: 2Pcs LED light bar mounting bracket. 2 Years Warranty Honored by Nilight.
  • See more on Amazon...

First Available: 06/09/2017

Brand: Nilight   |   Manufacturer: Nilight

Dimensions: 2.00 x 3.00 x 3.00 inches   |   Weight: 0.90 pounds

Warranty: 2 years Warranty

Amazon Price: $13.49 | as of 05/09/2024 (3:52pm pst) *DETAILS
List Price: $14.99 | Used Price: $11.28

See On Amazon




  #3

IRWIN QUICK-GRIP Clamps for Woodworking, Quick Release Triggers, 6 Inch, 8 Piece Set (IRHT83220)

Asin: B07V2NFYD5   |   Model: IRHT83220   |   PartNumber: IRHT83220   |   Ean: 0885911635707   |   UPC: 885911635707

All Clamps Constructed Of High-Tech Reinforced Resin For Strength And Durability.
Backed By The Irwin Lifetime.
Handi-Clamps Feature Quick-Release Triggers For Fast And Easy Positioning.

Features

  • Mini Bar clamps exert up to 150 psi. of clamping pressure
  • Handi-Clamps feature QUICK-RELEASE triggers for fast and easy positioning
  • All clamps constructed of high-tech reinforced resin for strength and durability
  • Backed by the IRWIN Lifetime
  • See more on Amazon...

Brand: IRWIN   |   Manufacturer: IRWIN

Dimensions: 2.30 x 21.30 x 15.60 inches   |   Weight: 4.98 pounds

Amazon Price: $39.99 ($5.00 / Count) | as of 05/09/2024 (3:52pm pst) *DETAILS

See On Amazon




  #4

Nilight - 90028D 4PCS LED Light Bar Horizontal Bar Clamp Mounting Kit Fit on 0.75" 1" 1.25" Bull Bars Roof Racks Roll Cages for ATV UTV and Trucks, 2 Years Warranty,Black

Asin: B07TPMTJMN   |   Model: 90028D   |   PartNumber: 90028D   |   Ean: 0812227032029   |   UPC: 812227032029

Perfect Fit Rubber Inserts: Rubber Inserts/Strip Are Designed With Rubber Teeth That Can Fit Perfectly And Grip Securely With The Thread Of Inside Clamp. Making Installation Easier And Always Protecting The Metal From Being Worn Down..
Make Light Mounting Easier: With The High Compatible Bar Clamp, You’Re Free Of The Hassle Of Lighter Mounting And Drilling Holes In Your Vehicle Body! Simple All In One Kit, Make Your Life Easier! 2 Years Warranty Honored By Nilight.
Built With Quality: Clamps Are Built Using Precision-Welded Cast Sturdy Aluminum, Makes It Lightweight, But Pretty Neat And Durable!.
High Compatibility: Compatible With Various Types Of Light Bar Brackets, The 10Mm Screw Hole Diameter Fits All Light With 8Mm Mounting Screws..

Features

  • Multi-application: The mini bar clamp is designed for a smaller horizontal tube size: 0. 75 , 1 , 1. 25 . It is applicable for roof racks, roll cages, bull bars, handlebars on an ATV, UTV and trucks.
  • High Compatibility: Compatible with various types of light bar brackets, the 10mm screw hole diameter fits all light with 8mm mounting screws.
  • Perfect Fit Rubber Inserts: Rubber inserts/strip are designed with rubber teeth that can fit perfectly and grip securely with the thread of inside clamp. Making installation easier and always protecting the metal from being worn down.
  • Built With Quality: Clamps are built using precision-welded cast sturdy aluminum, makes it lightweight, but pretty neat and durable!
  • Make Light Mounting Easier: With the high compatible bar clamp, you re free of the hassle of lighter mounting and drilling holes in your vehicle body! Simple all in one kit, make your life easier! 2 Years Warranty Honored by Nilight
  • See more on Amazon...

Brand: Nilight   |   Manufacturer: Nilight

Dimensions: 1.90 x 5.50 x 4.50 inches

Warranty: 2 Years Warranty

Amazon Price: $15.03 | as of 05/09/2024 (3:52pm pst) *DETAILS
List Price: $18.99 | Used Price: $13.44

See On Amazon




  #5

Nilight - 90027B 2PCS LED Light Bar Horizontal Bar Clamp Mounting Kit Fit on 0.75" 1" 1.25" Bull Bars Roof Racks Roll Cages for ATV UTV and Trucks, 2 Years Warranty

Asin: B07TNH72SG   |   Model: 90027B   |   PartNumber: 90027B   |   Ean: 0812227032012   |   UPC: 812227032012

Perfect Fit Rubber Inserts Rubber Inserts/Strip Are Designed With Rubber Teeth That Can Fit Perfectly And Grip Securely With The Thread Of Inside Clamp Making Installation Easier And Always Protecting The Metal From Being Worn Down.
Make Light Mounting Easier With The High Compatible Bar Clamp You’Ll Hassle, Free Of Drilling Holes In Your Vehicle Body. Simple All In One Kit Makes Your Life Easier. 2 Years Warranty Honored By Nilight.
Built With Quality Clamps Are Built Using Precision-Welded Cast Sturdy Aluminum Makes It Lightweight But Pretty Neat And Durable..
High Compatibility Compatible With Various Types Of Light Bar Brackets The 10Mm Screw Hole Diameter Fits All Light With 8Mm Mounting Screws.

Features

  • Multi-application The mini bar clamp is designed for a smaller horizontal tube size 0 75 1 1 25 It is applicable for roof racks roll cages bull bars handlebars on ATV UTV and trucks
  • High Compatibility Compatible with various types of light bar brackets the 10mm screw hole diameter fits all light with 8mm mounting screws
  • Perfect Fit Rubber Inserts Rubber inserts/strip are designed with rubber teeth that can fit perfectly and grip securely with the thread of inside clamp Making installation easier and always protecting the metal from being worn down
  • Built With Quality Clamps are built using precision-welded cast sturdy aluminum makes it lightweight but pretty neat and durable.
  • Make Light Mounting Easier With the high compatible bar clamp you ll hassle, free of drilling holes in your vehicle body. Simple all in one kit makes your life easier. 2 Years Warranty Honored by Nilight
  • See more on Amazon...

Brand: Nilight   |   Manufacturer: Nilight

Dimensions: 2.00 x 4.00 x 3.00 Inches   |   Weight: 0.64 Pounds

Warranty: 2 Years Warranty

Amazon Price: $9.98 | as of 05/09/2024 (3:52pm pst) *DETAILS

See On Amazon




  #6

IRWIN QUICK-GRIP Bar Clamps for Woodworking, One-Handed, Micro, 4-1/4", 2 Pack (1964747)

Asin: B00004SBCO   |   Model: 1964747   |   PartNumber: 1964747   |   Ean: 0038548536200   |   UPC: 038548536200

Ideal For Clamping Smaller Workpieces And Working In Confined Areas.
1-3/16" Throat Depth.
35 Lbs. Of Clamping Force.
One-Handed Quick-Release Trigger Releases The Clamp Instantly.

Features

  • Non-marring pads grip firmly and protect workpieces
  • One-handed Quick-Release trigger releases the clamp instantly
  • Ideal for clamping smaller workpieces and working in confined areas
  • 35 lbs. of clamping force
  • 1-3/16 throat depth
  • See more on Amazon...

Brand: IRWIN   |   Manufacturer: IRWIN

Dimensions: 4.06 x 10.50 x 1.25 inches   |   Weight: 0.11 pounds

Warranty: Warranty

Amazon Price: $12.98 ($6.49 / Count) | as of 05/09/2024 (3:52pm pst) *DETAILS
List Price: $16.23 ($8.12 / Count) | Used Price: $13.43 ($6.72 / Count)

See On Amazon




  #7

MZS Motorcycle Bar End Mirrors Rear View Side Mirror Black 7/8 Compatible with GROM MSX125 CB500F Z125 Z750 Z900 MT-03 MT-07 FZ-07 MT-09 FZ-09 MT-10 FZ-10 FZ6 FZ8 FZ6R SV650 SV1000 GSXR 600 750 1000

Asin: B079KBDC9Q   |   Model: Motorcycle Handlebar Bar End Mirrors   |   PartNumber: Motorcycle Handlebar Bar End Mirrors

Wider Vision:Motorcycle Rearview Mirror To Increase The Driver's Awareness And Field Of Vision And To Remove Blind Spots By Allowing The Driver To See The Vehicles And Conditions Behind Him..
Install Notice:They Are Aftermarket Parts, Not Oem Handlebar Mirrors, Only Can Direct Install In Standard Hollow 7/8 Inch Bar End. If Your Handlebar Is Threaded Style, May Need To Modify It Slightly To Make It Fit..
Adjustable Function:The Ball Joint Design Of The Motorcycle Mirrors Can Be Freely Adjusted 180 Degrees So That You Can Adjust The Position Angle To Suit Your Needs..
High Quality Material:Mzs Bar End Mirrors Used Cnc Billet Aluminum Housing & Optical Grade Acrylic With Anti Glare Mirror. Strong And Long-Lasting, It's Shockproof And Corrosion Resistant, Great For All Weather Conditions..

Features

  • Wide Fitment Suitable for most Motorcycle, Street bikes, Sports bikes Scooter Cruisers with 7/8 Standard Hollow Handlebars.
  • High Quality Material MZS Bar End Mirrors used CNC Billet Aluminum Housing & Optical Grade Acrylic with Anti Glare Mirror. Strong and long-lasting, it's shockproof and corrosion resistant, great for all weather conditions.
  • Wider Vision Motorcycle rearview mirror to increase the driver's awareness and field of vision and to remove blind spots by allowing the driver to see the vehicles and conditions behind him.
  • Adjustable Function The ball joint design of the motorcycle mirrors can be freely adjusted 180 degrees so that you can adjust the position angle to suit your needs.
  • INSTALL NOTICE They are aftermarket parts, not OEM handlebar mirrors, only can direct install in standard hollow 7/8 Inch bar end. If your handlebar is threaded style, may need to modify it slightly to make it fit.
  • See more on Amazon...

Brand: MZS   |   Manufacturer: MZS

Weight: 0.79 pounds

Amazon Price: $31.99 | as of 05/09/2024 (3:52pm pst) *DETAILS
Used Price: $24.04

See On Amazon




  #8

IRWIN QUICK-GRIP Bar Clamps for Woodworking, One-Handed, Heavy-Duty, 12" (1964712)

Asin: B001V61452   |   Model: 1964712   |   PartNumber: 1964712   |   Ean: 0784497088184, 7241870618800, 0038548105765, 7535001515503, 0038548087993, 0100076983570   |   UPC: 038548105765, 100076983570, 038548087993, 784497088184

Adjustable Foot Provides Added Support And Enables Clamp To Sit Upright On The Work Surface.
Double Locking Swivel Jaws To Allow Even Distribution Of Clamping Forces.
3-5/8" Throat Depth.
I-Beam Bar Design Reduces Bending And Flexing Even Under Extreme Pressure.
Patented Power Locks Hold More Pressure, Longer. Provides 600 Lbs Of One-Handed Force.
600 Lbs Of Sustained Clamping Pressure.
Removable Full Face Pads.
New Removable, Swivel Jaws And Non-Marring Pads.

Features

  • New Quick-Change button easily converts clamp to spreader
  • New removable, swivel jaws and non-marring pads
  • Adjustable foot provides added support and enables clamp to sit upright on the work surface
  • 600 lbs of sustained clamping pressure
  • I-beam bar design reduces bending and flexing even under extreme pressure
  • Patented POWER LOCKS hold more pressure, longer. Provides 600 lbs of one-handed force
  • Double Locking Swivel Jaws to allow even distribution of clamping forces
  • 3-5/8 Throat Depth
  • Removable Full Face Pads
  • See more on Amazon...

Brand: IRWIN   |   Manufacturer: IRWIN

Dimensions: 7.87 x 7.87 x 1.57 inches   |   Weight: 0.10 Pounds

Warranty: Warranty

Amazon Price: $26.99 | as of 05/09/2024 (3:52pm pst) *DETAILS

See On Amazon




  #9

Teoenix Sunglass Holder for Car, 2 Pack Car Sunglass Holder Visor Clip Magnetic Leather Sun Glasses Eyeglass Hanger, Fit for Different Size Eyeglasses, Carbon Fiber Black/Red

Asin: B0CP1NH9MR   |   Model: TE-DG-002   |   PartNumber: TE-DG-002

Stable And Sturdy: Strong Magnetic Suction In Visor Sunglasses Holder Clip Keeps The Sun Glasses Firmly In Place, No More Worry About The Clip Being Unstable And Eyeglasses Falling Off While Driving..
High Quality: The Sunglass Holder For Car Visor Clip Is Made Of Metal, Wrapped By Soft Leather, Which Prevents Your Eye Glasses And Sun Visor From Scratches. Neutral Color Blends In Well With Car Interior..
Seconds To Install: Simply Clip The Car Sunglass Holder On The Sun Visor Of Your Vehicle By One Hand, Quickly Install, Place Or Pick Your Eyeglasses, Space Saving And Great Addition To Your Car..
Versatile: Car Eyeglass Holder Hanger Clip For Eyeglasses, Reading Glasses, Prescription Glasses, Improved Elastic Cloth Makes It Suitable For Different Thickness Of Eye Glasses With Thick, Medium Or Thin Legs..

Features

  • Easier to Use: With upgraded standable cloth handle, the sunglasses holder for car is more convenient and user-friendly. The thicker clamp of glasses holder for car can be securely attached to most sun visors without obstructing driver's view or makeup mirror.
  • Versatile: Car eyeglass holder hanger clip for eyeglasses, reading glasses, prescription glasses, improved elastic cloth makes it suitable for different thickness of eye glasses with thick, medium or thin legs.
  • Stable and Sturdy: Strong magnetic suction in visor sunglasses holder clip keeps the sun glasses firmly in place, no more worry about the clip being unstable and eyeglasses falling off while driving.
  • Seconds to Install: Simply clip the car sunglass holder on the sun visor of your vehicle by one hand, quickly install, place or pick your eyeglasses, space saving and great addition to your car.
  • High Quality: The sunglass holder for car visor clip is made of metal, wrapped by soft leather, which prevents your eye glasses and sun visor from scratches. Neutral color blends in well with car interior.
  • See more on Amazon...

Brand: Teoenix   |   Manufacturer: Teoenix

Amazon Price: $9.96 | as of 05/09/2024 (3:52pm pst) *DETAILS

See On Amazon




  #10

IRWINQUICK-GRIPOne-Handed Bar Clamp, Medium-Duty, 12", 1964718

Asin: B001DK7SJM   |   Model: 1964718   |   PartNumber: 1964718
Ean: 0100177460499, 7241870688896, 0807031777006, 7535001474855, 0801200943544, 0115970698406, 0787721788928, 0038548512228, 0803982926265, 0168141354199, 0640026827108, 0041114556731, 0038548103709, 0151903413784, 0182682285644, 0100058641948, 0809386496731, 0012302152172, 0809187144442, 0787721839309, 6623545310058
UPC: 038548103709, 809386496731, 640026827108, 803982926265, 041114556731, 787721788928, 801200943544, 115970698406, 100058641948, 038548512228, 168141354199, 807031777006, 809187144442, 182682285644, 100177460499, 151903413784, 787721839309, 012302152172

I-Beam Bar Design Reduces Bending And Flexing Even Under Extreme Pressure.
Patented Locking Swivel Jaw.
3-3/16" Throat Depth.
One-Handed Quick-Release Trigger Releases The Clamp Instantly.
New And Improved One-Handed Bar Clamp Delivers 300 Lbs. Of Sustained Clamping Force, And Locking Swivel Jaw For Evenly Distributed Clamping Force.
300 Lbs Of Sustained Clamping Pressure.
I-Beam Bar Features Removable Pads.
New Removable, Swivel Jaws And Non-Marring Pads.

Features

  • New Quick-Change button easily converts clamp to spreader
  • New removable, swivel jaws and non-marring pads
  • I-beam bar design reduces bending and flexing even under extreme pressure
  • 300 lbs of sustained clamping pressure
  • One-handed Quick-Release trigger releases the clamp instantly
  • New and improved one-handed bar clamp delivers 300 lbs. of sustained clamping force, and locking swivel jaw for evenly distributed clamping force
  • Patented Locking Swivel Jaw
  • 3-3/16 Throat Depth
  • I-beam bar features removable pads
  • See more on Amazon...

Brand: IRWIN   |   Manufacturer: IRWIN

Dimensions: 4.92 x 19.67 x 9.17 inches   |   Weight: 1.50 pounds

Warranty: No

Amazon Price: $21.00 | as of 05/09/2024 (3:52pm pst) *DETAILS
List Price: $37.47 | Used Price: $15.83

See On Amazon




  #11

SINGARO Motorcycle Cup Holder with Alligator Clip Handle Cup Holder, Oxford Fabric with Mesh Bag Bicycle Accessories for ATV, Scooter, Wheelchair, Camper

Asin: B097P11KGK   |   Model: ‎SINGARO-GVSC   |   PartNumber: ‎SINGARO-GVSC

Easy To Install:When Using, First Paste The Attached Sponge Glue On The Installation Place, Place It To Slide, Adjust The Alligator Clip To A Suitable Position, And Then Tighten The Installation..
Buy With Confidence:Please Contact Us If You Have Any Questions, We Are Always Here To Satisfy All Of You..
Widely Applicable:The Cup Holder Is Suitable For Bicycles, Motorcycles, Wheelchairs, Trolleys, Golf Carts, Scooters, Etc..
Excellent Workmanship:The Lock Is Firmly Installed, The Aluminum Plate Is Firmly Supported, The Bottom Hole Can Remove Excess Water, Different Specifications Of Mesh Bags Can Place A Variety Of Items, And The Covering Layer At The Lock Can Prevent Friction With The Bottle..

Features

  • High quality materials The cup holder is made of high-quality Oxford cloth, which is wear-resistant and durable. The inside is made of heat-insulating material.No matter the cold drink that is isolated from the heat or the hot drink in the cold winter, the heat preservation effect is very good.
  • Excellent workmanship The lock is firmly installed, the aluminum plate is firmly supported, the bottom hole can remove excess water, different specifications of mesh bags can place a variety of items, and the covering layer at the lock can prevent friction with the bottle.
  • Easy to install When using, first paste the attached sponge glue on the installation place, place it to slide, adjust the alligator clip to a suitable position, and then tighten the installation.
  • Widely applicable The cup holder is suitable for bicycles, motorcycles, wheelchairs, trolleys, golf carts, scooters, etc.
  • Buy with confidence Please contact us if you have any questions, we are always here to satisfy all of you.
  • See more on Amazon...

Brand: SINGARO   |   Manufacturer: SINGARO

Dimensions: 0.10 x 0.40 x 0.30 inches

Amazon Price: $11.99 | as of 05/09/2024 (3:52pm pst) *DETAILS

See On Amazon




  #12

IRWIN Tools QUICK-GRIP Resin Spring Clamp, 2-inch (58200), Blue

Asin: B000022450   |   Model: -----   |   PartNumber: -----
Ean: 0014444920268, 7370598744406, 0640024989235, 0038548582009, 5509005517841, 0031113172575, 0069060282177, 7257259918805
UPC: 038548582009, 640024989235, 014444920268, 031113172575, 069060282177

Specially Designed Jaws Hold Odd-Shaped Workpieces.
Specially Designed Jaws Hold Odd-Shaped Workpieces.
2-Inch Clamping Capacity.
Spring Clamp Has Non-Marring Pads To Protect Workpiece.
High-Tech Resin Construction Provides Strength And Durability.
2-Inch Clamping Capacity.
High-Tech Resin Construction Provides Strength And Durability.

Features

  • Spring clamp has non-marring pads to protect workpiece
  • High-tech resin construction provides strength and durability
  • Specially designed jaws hold odd-shaped workpieces
  • 2-inch clamping capacity
  • Spring clamp has non-marring pads to protect workpiece
  • High-tech resin construction provides strength and durability
  • Specially designed jaws hold odd-shaped workpieces
  • 2-inch clamping capacity
  • See more on Amazon...

Brand: IRWIN   |   Manufacturer: IRWIN

Dimensions: 1.50 x 32.50 x 4.30 inches   |   Weight: 0.10 pounds

Warranty: Warranty

Amazon Price: $3.05 | as of 05/09/2024 (3:52pm pst) *DETAILS
List Price: $5.30

See On Amazon




  #13

Car Door Edge Guards, 16Ft Universal Rubber Seal Protector U Shape Edge Trim Car Door Edge Protection for Most Car, Aluminum Boat Edge Guards (Black/16FT)

Asin: B097D595LZ   |   Model: BLAU GRUN-Door Edge GuardsBG   |   PartNumber: BLAU GRUN-Door Edge GuardsBG   |   Ean: 6221345016141, 0710702328868   |   UPC: 710702328868

Compatibility: The Car Door Edge Guards Fit For Most Cars, Which Can Fit Your Car Well And Greatly Improve Your Appearance.Could Be Installed On Front Doors, Back Doors, Back Hatch Door, Bonnet Edge..
Customer Service: If You Have Any Questions About The Product, Please Let Us Know In Time. We Will Solve The Problem For You In Time. If You Are Not Satisfied With Our Products, We Will Refund You Unconditionally..
Easy To Install:Just Push The Door Edge Guard Over The Installation Position. It Can Be Installed In 15 Minutes. If You Tap It With A Rubber Hammer (Not Included), The Installation Will Be Much Easier. They Work Closely Together And Won't Damage Your Door Paint. Even After Washing The Car, It Won't Fall Off..
High Quality: This Product Is Made Of High Quality Rubber.Heat Resistance, Abrasion Resistance, Anti-Aging, Waterproof & Uv Resistance. For Most General Cars,It Can Protect Your Vehicle From Scratches..

Features

  • Notice to purchase: Before purchasing products, please confirm whether our products are suitable for your car. Not suitable for vehicles with thick rubber strips or side doors.
  • High quality: This product is made of high quality rubber.Heat resistance, abrasion resistance, anti-aging, waterproof & UV resistance. For most general cars it can protect your vehicle from scratches.
  • Compatibility: The car door edge guards fit for most cars, which can fit your car well and greatly improve your appearance.Could be installed on front doors, back doors, back hatch door, bonnet edge.
  • Easy to install:Just push the door edge guard over the installation position. It can be installed in 15 minutes. If you tap it with a rubber hammer (not included), the installation will be much easier. They work closely together and won't damage your door paint. Even after washing the car, it won't fall off.
  • Customer service: If you have any questions about the product, please let us know in time. We will solve the problem for you in time. If you are not satisfied with our products, we will refund you unconditionally.
  • See more on Amazon...

Brand: BLAU GRUN   |   Manufacturer: BLAU GRUN

Dimensions: 0.39 x 192.13 x 0.79 inches   |   Weight: 0.68 Pounds

Amazon Price: $10.99 | as of 05/09/2024 (3:52pm pst) *DETAILS

See On Amazon




  #14

Irwin Tools Irwin 59200CD Quik-Grip Handi-Clamp, 4-Inch

Asin: B00I29Z1TQ   |   Model: 1799213   |   PartNumber: 1799213   |   Ean: 0038548995670   |   UPC: 038548995670

Designed As The Answer To Hundreds Of Quick Clamping Needs Around The Home, Workshop Garage, Or Job Site.
Full Lifetime Warranty. Durable, Lightweight Impact-Resistant Resin Guaranteed Free From Defects In Material And Workmanship For The Life Of The Tool.
Specially Designed Jaws Reach Around And Hold Odd-Shaped Work Pieces. Non-Marring Swivel Pads Protect Work. Non-Slip Handles Guarantee Grip.
Patented Ratcheting Mechanism Provides Adjustable Clamping Pressure And Significantly Reduces Hand Force Required To Generate Clamping Pressure.

Features

  • Quick-release trigger for fast, easy positioning and convenient one-handed operation. Use anywhere you need an extra hand
  • Patented ratcheting mechanism provides adjustable clamping pressure and significantly reduces hand force required to generate clamping pressure
  • Designed as the answer to hundreds of quick clamping needs around the home, workshop garage, or job site
  • Specially designed jaws reach around and hold odd-shaped work pieces. Non-marring swivel pads protect work. Non-slip handles guarantee grip
  • Full Lifetime Warranty. Durable, lightweight impact-resistant resin guaranteed free from defects in material and workmanship for the life of the tool
  • See more on Amazon...

Brand: IRWIN   |   Manufacturer: AMEX9

Dimensions: 1.13 x 7.63 x 4.00 inches

Warranty: Warranty

Amazon Price: $7.00 | as of 05/09/2024 (3:52pm pst) *DETAILS
List Price: $12.02

See On Amazon




  #15

IRWIN QUICK-GRIP Handi-Clamp, 4", 59400CD

Asin: B00005RHP0   |   Model: T59400ECD   |   PartNumber: T59400ECD
Ean: 7336117868541, 0799621151689, 7844908484110, 0767615682822, 0385485940028, 0074994331341, 0100077003833, 7535001106244, 5526679999094
UPC: 767615682822, 385485940028, 799621151689, 074994331341, 100077003833

Significantly Reduced Hand Force Needed To Generate Clamping Pressure Makes These Clamps More Comfortable To Use.
Specially Designed Jaws Hold Odd-Shaped Workpieces.
High-Tech Resin Construction Provides Strength And Durability.
Ratcheting Mechanism Provides Adjustable Clamping Pressure.

Features

  • QUICK-RELEASE trigger allows for fast and easy positioning and release
  • Ratcheting mechanism provides adjustable clamping pressure
  • Significantly reduced hand force needed to generate clamping pressure makes these clamps more comfortable to use
  • High-tech resin construction provides strength and durability
  • Specially designed jaws hold odd-shaped workpieces
  • See more on Amazon...

Brand: IRWIN   |   Manufacturer: IRWIN

Dimensions: 1.19 x 9.63 x 5.00 inches   |   Weight: 0.50 Pounds

Warranty: Limited Lifetime

Amazon Price: $7.59 | as of 05/09/2024 (3:52pm pst) *DETAILS
List Price: $12.94

See On Amazon




  #16

POWERTEC 71409 Quick Screw Guide Rail Clamp for MFT Table and Track Saw Guide Rail System, 7 Capacity x 2-3/8 Throat Depth, 400lbs Clamping Force, 2 Pack

Asin: B07SN2NF3C   |   Model: 71409   |   PartNumber: 71409   |   Ean: 0843441104162   |   UPC: 843441104162

Superior Clamping Force: Delivers Consistently Secure Placement And Safe Clamp Action For A Seamless Workflow.
Please Note: The Clamp Ends Have A Specific Profile, See The Image For Details. They Are Designed To Work With Mft Tables, The Track Saw Guides Listed And Some Heavy Duty T-Tracks With An Opening Of At Least 9/32”. They Will Not Work In Universal Or ¼” T-Track. Please Check The Size Of Your T-Track To Verify That The Clamps Will Work For Your Application..
Versatility: These Rail Clamps Provide A Portable Clamping Option For Festool, Makita, Powertec 71387/ 71691 Track Saw Guide Rails And Similar Sized Track Saw Guides, Perfect As Mft Clamps For Your Homemade Workbench, And Fits In Some Heavy Duty T-Slots (See Image For Size).
Premium Design: Features High Quality And Ergonomic Plastic Clamp Handle Grips For Quick And Comfortable Tightening, Without The Splinters From Cheap Wood; The Steel Pressure Pads Are Completed With Removable Non Marring Plastic.

Features

  • INCLUDES: (2) Quick Screw Down Clamps with 7" Max Opening, 2-3/8" Throat Depth
  • PREMIUM DESIGN: Features high quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood; The steel pressure pads are completed with removable non marring plastic
  • SUPERIOR CLAMPING FORCE: Delivers consistently secure placement and safe clamp action for a seamless workflow
  • VERSATILITY: These rail clamps provide a portable clamping option for Festool, Makita, POWERTEC 71387/ 71691 track saw guide rails and similar sized track saw guides, perfect as MFT clamps for your homemade workbench, and fits in some heavy duty T-slots (see image for size)
  • PLEASE NOTE: The clamp ends have a specific profile, see the image for details. They are designed to work with MFT tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32 . They will not work in universal or t-track. Please check the size of your t-track to verify that the clamps will work for your application.
  • See more on Amazon...

Brand: POWERTEC   |   Manufacturer: POWERTEC

Dimensions: 1.20 x 9.00 x 4.50 Inches   |   Weight: 1.35 Pounds

Amazon Price: $31.04 | as of 05/09/2024 (3:52pm pst) *DETAILS
Used Price: $29.87

See On Amazon




  #17

QWORK Ratcheting Table Clamp, 2 Pack Quick Release Bar Clamp with 6-5/16" Capacity and 2-5/16" Throat Depth for Sanding, Cutting

Asin: B09L7WFTL1   |   Model: WD5814   |   PartNumber: WD5814   |   Ean: 0734900618965   |   UPC: 734900618965

Specification: The Opening Length Reaches To 6-5/16". The Depth Can Up To 2-5/16". It Can Provide The 540Lbs Force..
Ratchet Mechanism: Specially Shaped Fixed Jaw, Ratchet Mechanism Ensures Vibration Resistant Clamping. 2 Pack Ratcheting Table Clamp..
Rugged And Reliable: This Ratcheting Table Clamp Is An Essential Tool For Your Workshop, Allowing You To Securely Clamp Work Pieces For Sanding, Precision Cutting And More. Compatible With Saw Guides From Top Leading Brands Such As Festool, Protool, Metabo, Makita And Dewalt, Provides A Reliable Experience..
Reliable Grip: With Our Ratcheting Table Clamp Featuring A Self-Aligning Design, It Is Designed To Fit Seamlessly On Surfaces At Various Angles And Securely Hold Your Workpiece In Place..

Features

  • High Quality: Made of high quality Cr-V steel with steel pads, this clamp is durable, stable, wear resistant for long time use.
  • Reliable Grip: With our Ratcheting Table Clamp featuring a self-aligning design, it is designed to fit seamlessly on surfaces at various angles and securely hold your workpiece in place.
  • Specification: The opening length reaches to 6-5/16. The depth can up to 2-5/16. It can provide the 540lbs force.
  • Rugged and Reliable: This Ratcheting Table Clamp is an essential tool for your workshop, allowing you to securely clamp work pieces for sanding, precision cutting and more. Compatible with saw guides from top leading brands such as Festool, Protool, Metabo, Makita and DeWalt, provides a reliable experience.
  • Ratchet mechanism: Specially shaped fixed jaw, ratchet mechanism ensures vibration resistant clamping. 2 Pack Ratcheting Table Clamp.
  • See more on Amazon...

First Available: 01/01/2024

Brand: QWORK   |   Manufacturer: QWORK

Weight: 2.16 pounds

Amazon Price: $33.97 ($16.98 / Count) | as of 05/09/2024 (3:52pm pst) *DETAILS

See On Amazon




  #18

IRWIN QUICK-GRIP Clamps, 4 Piece Set with Bar Clamps, 4-1/4", Handi Clamps, 2" (IRHT83222)

Asin: B0C22TJM12   |   Model: IRHT83222   |   PartNumber: IRHT83222   |   Ean: 0885911654906   |   UPC: 885911654906

The Bar Clamps Feature One-Handed Quick-Release Trigger And 1-3/16" Throat Depth.
Reduced Hand Force Required To Generate Clamping Pressure And Specially Designed Jaws Hold Odd-Shaped Woodworking Or Workpieces.
The Handi-Clamps Feature A Patented Ratcheting Mechanism That Provides Adjustable Clamping Pressure And Significantly Reduces Hand Force Required To Generate Clamping Pressure.
The Bar Clamps Have 35 Lbs Clamping Force And Non-Marring Pads Grip Firmly And Protect Work.

Features

  • This 4-piece IRWIN QUICK-GRIP clamp set includes (2) 4-1/2" bar clamps and (2) 2" handi-clamps
  • The bar clamps have 35 Lbs Clamping Force and Non-marring pads grip firmly and protect work
  • The bar clamps feature One-handed Quick-Release trigger and 1-3/16 throat depth
  • The Handi-Clamps feature a Patented ratcheting mechanism that provides adjustable clamping pressure and significantly reduces hand force required to generate clamping pressure
  • Reduced hand force required to generate clamping pressure and Specially designed jaws hold odd-shaped woodworking or workpieces
  • See more on Amazon...

Brand: IRWIN   |   Manufacturer: IRWIN

Amazon Price: $23.46 | as of 05/09/2024 (3:52pm pst) *DETAILS

See On Amazon




  #19

WORKPRO 11" Face Clamp, Locking C-Clamp, Metal Pocket Hole Clamp for Woodworking and Jig Pocket Hole

Asin: B081RHSRNK   |   Ean: 0820909759065   |   UPC: 820909759065

Ergonomic Handle: Ergonomic Comfort Grip Reduces Slipping And Eliminates The Possibility Of Pinching..
Multi-Use: Helps Create A Flush Joint During Pocket Hole Assembly And Work Great For Lots Of Other Shop And Project Tasks That Require Solid Clamping Without Marring..
Large Pads: These Clamps Feature Large Swiveling Clamp Pads That Distribute Clamping Force Evenly, And Hold Pieces Flush During Pocket-Hole Assembly. And The Circular Face Spreads Force Evenly Preventing Material Marring..
Easy Adjust: Workpro Face Clamp A Simple Screw That Adjusts The Jaw Opening And Clamp Force To Match Material Thickness, Plus Comfortable Padded Handles.

Features

  • Great Reach: WORKPRO metal face clamp offers 3-3/16 inch reach along with two large non-marring clamp faces and swiveling pads.
  • Easy Adjust: WORKPRO face clamp a simple screw that adjusts the jaw opening and clamp force to match material thickness, plus comfortable padded handles
  • Ergonomic Handle: Ergonomic comfort grip reduces slipping and eliminates the possibility of pinching.
  • Large Pads: These clamps feature large swiveling clamp pads that distribute clamping force evenly, and hold pieces flush during pocket-hole assembly. And the circular face spreads force evenly preventing material marring.
  • Multi-Use: Helps create a flush joint during pocket hole assembly and work great for lots of other shop and project tasks that require solid clamping without marring.
  • See more on Amazon...

Brand: WORKPRO   |   Manufacturer: HANZGHOU GREATSTAR INDUSTRIAL CO.LTD

Amazon Price: $17.99 | as of 05/09/2024 (3:52pm pst) *DETAILS
Used Price: $17.09

See On Amazon




  #20

IHOTDER Throttle Cable Kit,Motorcycle Handlebar Grips with Twist Throttle & 47" Throttle Cables,Universal Bike Throttle Assembly Compatible with 7/8" 110-250cc Motorcycle Bike ATV

Asin: B0CLGL5L8Q   |   Model: Throttle Cable Kit   |   PartNumber: Throttle Cable Kit

🏍️【Adjusting The Throttle Cable】 To Ensure Proper Functioning And Sensitivity Of The Mini Grip And Mini Bike Throttle Cable, The Rider Can Adjust It According To Personal Preference And Needs. Typically, The Throttle Cable Is Adjusted By Loosening Or Tightening The Length Of The Cable For More Comfortable And Precise Throttle Control During Riding..
🏍️【Complete After-Sales Service】 Our Mini Bike Throttle Assembly Enjoy Excellent After-Sales Service. If You Are Not Satisfied With Our Mini Bike Throttle Or Have Any Questions About Our Mini Bike Throttle Cable, Please Feel Free To Contact Us, We Can Customize The Solution For Your Satisfaction. Please Feel Free To Purchase With Confidence!.
🏍️【Installation Precautions】 The Packaging Includes: 1 * Left Hand Grip, 1 * Right Hand Grip With Throttle Tube Installed, 1 * Throttle Cable, 1 * Throttle Outer Shell Clamp With 2 Stainless Steel Screws. During Installation, The Rider Needs To Be Careful Not To Excessively Tighten Or Loosen The Throttle Cable To Prevent It From Being Unable To Control The Throttle Properly..
🏍️【Advanced Materials】 The Throttle Cable For Mini Bike Brake Kit Consists Of A Soft And Abrasion-Resistant Wire Rope Covered With A Protective Sleeve To Increase Its Durability And Longevity. The Handle Is Made Of Durable Pvc With A Textured Finish To Provide A Comfortable Grip And Good Maneuverability. Practical Motorcycle Accessories For Replacement..

Features

  • Scope of Application Our go kart throttle cable is 47 inches long and the mini grip is 4.7 inches long, suitable for 7/8 inch/22mm handles to use, can be used to replace 110cc-250cc motocross bike, ATV, mini bike, pocket bike throttle handle kits, compatible with honda xr80 cf70 cf80 xr100 cf100, compatible with bajia mb165cc 5.5hp mini bike.
  • Advanced Materials The throttle cable for mini bike brake kit consists of a soft and abrasion-resistant wire rope covered with a protective sleeve to increase its durability and longevity. The handle is made of durable PVC with a textured finish to provide a comfortable grip and good maneuverability. Practical motorcycle accessories for replacement.
  • Adjusting the Throttle Cable To ensure proper functioning and sensitivity of the mini grip and mini bike throttle cable, the rider can adjust it according to personal preference and needs. Typically, the throttle cable is adjusted by loosening or tightening the length of the cable for more comfortable and precise throttle control during riding.
  • Installation Precautions The packaging includes: 1 * left hand grip, 1 * right hand grip with throttle tube installed, 1 * throttle cable, 1 * throttle outer shell clamp with 2 stainless steel screws. During installation, the rider needs to be careful not to excessively tighten or loosen the throttle cable to prevent it from being unable to control the throttle properly.
  • Complete After-sales Service Our mini bike throttle assembly enjoy excellent after-sales service. If you are not satisfied with our mini bike throttle or have any questions about our mini bike throttle cable, please feel free to contact us, we can customize the solution for your satisfaction. Please feel free to purchase with confidence!
  • See more on Amazon...

Brand: IHOTDER   |   Manufacturer: ihotder

Dimensions: 2.55 x 5.12 x 2.55 inches   |   Weight: 0.62 pounds

Amazon Price: $9.99 | as of 05/09/2024 (3:52pm pst) *DETAILS

See On Amazon





Looking For Something Else? Search

Home & Garden


Home Improvement


Industrial


Electronics


Office


Car & Automotive


Sporting Goods


Beauty Supplies


Health & Personal Care


Fashion


Toys and Hobby



Additional Categories


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.