ABN 3-Jaw Gear Puller 4-Piece Set 3in, 4in, 6in, 8in Removal Tool Kit for Slide Gears, Pulley, and Flywheel
Asin: B077K7FVMB | Model: ABN-9619 | PartNumber: ABN-9619 | Ean: 0688295879619 | UPC: 688295879619
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Multi-Position Design]: Universal Pulley Puller Tools Have Reversible Jaws That Switch From Inside To Outside Grip In Short Or Long Reach Lengths For Maximum Versatility; Each Tool Features 4 Reach Lengths.
[Works With Your Tools]: Tall Hex Head Screw Fits Your Existing Hand Wrench, Ratchet, Or Combination Spanner For Gear And Bearing Removal.
[Built To Last]: Forged And Hardened Steel Provide Maximum Strength And Longevity To The Gear Puller Sets; Slim Puller Jaws Allow For Easy Gripping And Access To Tight Spaces While The Steel Center Bolt And Acme-Thread Offer Smooth Operation.
[Damage-Free Removal]: Manual Bearing Pullers Remove Slide Gears, Pulleys, Bearings, Bushings, And Flywheels Without Causing Damage To Your Application.
Features
- [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, 6, and 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
- [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
- [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
- [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
- [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 4.10 x 11.50 x 6.00 inches | Weight: 5.93 Pounds
See On Amazon Similar To ABN 3Jaw Gear Puller 4Piece
#1
Orion Motor Tech Gear Puller Set, 3" 4" 6" 8" 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal, Heavy Duty Pulley Puller with Reversible Jaws 4 pcs Bearing Puller Tool Kit
Asin: B084SV21FP | Model: S00400 | PartNumber: S00400
3 Jaw Design: These Power Steering Pulley Pullers Bite Tightly Onto Your Components With Their Reinforced Jaws And Distribute Even Pulling Force To Remove Parts Without Causing Damage.
Tools For Mechanics: Drop-Forged And Heat-Treated Carbon Steel Builds With Corrosion Proof Coatings Ensure These Pullers Last For Resilient Service With Unrivaled Strength And Durability.
Reversible Jaws: Each Pulley Removal Tool Can Be Reversed To Pull Parts From Either The Inside Or Outside, With The 6" And 8" Gear Puller Provide 4 Configurations For A Sure Grip Thanks To Their Dual Fixing Holes.
Better Together: Our Bearing Puller Set Includes Four Puller Sizes, Offering Maximum Spreads Of 3", 4", 6", And 8" And Reaches Of 4.3", 5", 7.3", And 9.2" To Cover Most Applications.
Features
- UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts
- BETTER TOGETHER: Our bearing puller set includes four puller sizes, offering maximum spreads of 3, 4, 6, and 8 and reaches of 4.3, 5, 7.3, and 9.2 to cover most applications
- 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage
- REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 and 8 gear puller provide 4 configurations for a sure grip thanks to their dual fixing holes
- TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 4.00 x 11.00 x 5.00 inches | Weight: 10.00 pounds
Warranty: 1 year
See On Amazon #2
GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Puller Set, 2 and 5 Ton - 3627
Asin: B003TO9YDS | Model: 3627 | PartNumber: 3627 | Ean: 0634746243133, 0094715613921, 0821710362796, 0787721780809, 0082171036279, 0765042375089 | UPC: 821710362796, 094715613921, 765042375089, 634746243133, 082171036279, 787721780809
Pullers Can Also Be Converted To Two- And Three-Leg Pullers.
Legs Index Into Position And Stay In Place, Letting You Easily Support The Puller And Quickly Connect Each Jaw One At A Time To The Pulley Without Help.
Features
- Ratcheting pullers have a time-saving, indexing jaw design
- Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help
- Pullers can also be converted to two- and three-leg pullers
- See more on Amazon...
Brand: GEARWRENCH | Manufacturer: GEARWRENCH
Dimensions: 2.00 x 11.50 x 7.90 inches | Weight: 5.13 Pounds
Warranty: Standard Limited Lifetime
See On Amazon #3
DURATECH 4-Piece 3-Jaw Gear Puller, 3", 4", 6", 8", Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel
Asin: B08G8TZ5HM | Model: DT3JGP04S | PartNumber: DT3JGP04S | Ean: 0820909680871 | UPC: 820909680871
Each Of The Three 3-Jaw Gear And Bearing Pullers Can Be Reversed To Pull Parts From Either The Inside Or Outside. Universal 4 Or 8-Position Reversible Jaws Offer An Inside Or Outside Grip With Short, Standard, Long, Or Extra-Long Reach..
Use The Duratech 3, 4, 6, And 8-Inch Gear Puller 3 Jaw Flywheel Puller Set To Remove Most Shift-Fitted Parts With Ease. Perfect For You To Smoothly And Safely Slide Gear, Pulley, Bearing, And Flywheel Off The Shaft. Free Replacement Insures Your Duratech Wrenches Purchase Against Manufacturer Defects..
The Three-Jaw Design Balances The Pulling Force Well, And Claws Are Precisely Machined To Give A Non-Slip And Secure Grip On The Gears. Make It Deal For Pulling Work In Confined Areas. Achieve More With Its Adjustable And Reversible Jaws..
Three Jaws Come With Fine Chrome Plating To Provide Reliable And Effective Rust And Corrosion Protection. The Drive Screw Is Covered By Black Phosphatizing, Which Provides Maximum Strength And Longevity To The Gear Puller, Puller Jaws Allow For Easy Gripping And Access To Tight Spaces. No Need To Assemble Yourself Is The Advantage Of Duratech..
Features
- Drop-forged CR-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.
- Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.
- Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8-position reversible jaws offer an inside or outside grip with short, standard, long, or extra-long reach.
- The three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws.
- Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects.
- See more on Amazon...
Brand: DURATECH | Manufacturer: LONGYOU YIYANG IMPORT AND EXPORT CO.,LTD
See On Amazon #4
ChgImposs 12 Inch 2-Jaw Gear Puller, Adjustable CR-V Bearing Puller Gears, Removal Tool for External Internal Pulling, Puller Tool Separate Lifting Device
Asin: B0CH9Z6DFN | Model: EPC_HAD_B0P | PartNumber: EPC_HAD_B0P
Adjustable Design - Adjustable Clamping Depth And Grip Width, Suitable For Different Sizes Of Gears And Bearings，Enables Many Bearings And Components To Be Dismounted.
Ease Of Use - Hexagonal Head On Spindle With A Flange, Helps Prevent The Spanner From Slipping During Operation. Button On Beam Enhances The Stability And Safety, Also Makes It Easily To Change The Puller Into Internal Or External Gear Puller..
Damage Free Removal - Removal Tool Kit For Slide Gears, Pulley, And Flywheel, Makes Removal Simple And Damage-Free. Can Be Used For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel, Car Wheel, Machine Wheel, Etc.
Multi-Purpose Reversible Jaw Puller - The Two Arms Of The Puller Can Be Mounted With The Claws Facing Inside Or Facing Outside, Suit For Internal And External Pulling Of Bearings And Other Components..
Features
- High Quality Material - Made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearings enables many bearings and components to be dismounted
- Damage Free Removal - Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc
- Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Button on beam enhances the stability and safety, also makes it easily to change the puller into internal or external gear puller.
- See more on Amazon...
Brand: ChgImposs | Manufacturer: FLXDirect
Dimensions: 1.30 x 11.00 x 10.00 inches
Warranty: This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.
See On Amazon #5
BELOMI 3 Jaw Inner Bearing Puller, Pilot Bearing Gear Puller for Auto with Reversible Jaws, Heavy Duty Gear Extractor Tool for Automotive Wheel, Pulling Kit for Motorcycle Car SUV (6 inch)
Asin: B0CJR59FHY | Model: Inner Bearing Puller | PartNumber: Inner Bearing Puller
【Practical Pulling Tool】: If You Carry Out Work To Remove Pulleys, Gears, Bearings, Cranks Etc., Our Wheel Bearing Removal Tool Makes It Easy To Pull Them Out And Protects These Car Parts Well From Damaging Them, Increasing Your Efficiency And Saving You Time..
【Package Includes】: There Are Three Size Specifications: 3 Inches, 4 Inches Or 6 Inches. Please Choose According To The Size Of The Part You Need To Handle And The Range Of 3 Jaw Puller To Avoid Unsuitable Application. And Each Package Includes 1 Piece 3-Jaw Pilot Bearing Puller..
【Wide Application】: Our 3-Jaw Inner Bearing Puller Is Perfect For A Wide Range Of Uses, Including Motorcycle Wheel, Bicycle Wheel, Pump Bearing Generator Bearing, Machine Bearing Etc. Structure Design, Gently Turning The Small Wrench Can Produce A Strong Pull Force..
【Three-Jaw Design】: The Bearing Puller Group Adopts A Three-Jaw Design. The Three-Jaw Design Can Apply Uniform Pressure, Which Can Effectively Prevent Slippage And Bearing Damage, And Ensure Stability During Use. It Allows For A Strong Pulling Force With Minimal Effort..
Features
- Premium Quality : The 3-Jaw bearing extractor pilot bearing puller is made of high-grade carbon steel material with black oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws. Our inner bearing puller is also heat-treated for exceptional strength and longevity. The corrosion-resistant coating ensures optimal performance and protection.
- Three-Jaw Design : The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure stability during use. It allows for a strong pulling force with minimal effort.
- Practical Pulling Tool : If you carry out work to remove pulleys, gears, bearings, cranks etc., our wheel bearing removal tool makes it easy to pull them out and protects these car parts well from damaging them, increasing your efficiency and saving you time.
- Wide Application : Our 3-Jaw Inner Bearing Puller is perfect for a wide range of uses, including motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc. Structure design, gently turning the small wrench can produce a strong pull force.
- Package Includes : There are three size specifications: 3 inches, 4 inches or 6 inches. Please choose according to the size of the part you need to handle and the range of 3 jaw puller to avoid unsuitable application. And each package includes 1 piece 3-jaw pilot bearing puller.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 0.70 x 2.00 x 1.50 inches
Warranty: 0.2
See On Amazon #6
BILITOOLS 3" 2-Jaw Gear Puller, Internal External for Removal of Pulleys Flywheels Bearings & Gears
Asin: B0B2ZZXMGB | Ean: 6974676371303
2 Jaw Gear Puller Can Be Reversed To Pull Parts From Either The Inside Or Outside. The Jaws Allows For Easy Gripping And Access To Tight Spaces..
There Are 5 Different Sizes Of Jaw Puller For You To Choose To Deal With Different Parts (Small, Medium And Large): 3", 4", 6", 8", 10".
The Button Makes It Easily To Change The Puller Into Internal Or External Gear Puller..
This 2 Jaw Gear Puller Is Made With Premium Heat-Treated Cr-V Steel To Ensure No Breakages Or Bend Occur From The High Tension Experienced During Pulling..
Features
- 2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.
- This 2 jaw gear puller is made with premium heat-treated CR-V steel to ensure no breakages or bend occur from the high tension experienced during pulling.
- 2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.
- The button makes it easily to change the puller into internal or external gear puller.
- There are 5 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 3, 4, 6, 8, 10
- See more on Amazon...
Brand: BILITOOLS | Manufacturer: BILITOOLS
Dimensions: 4.21 x 5.63 x 1.30 inches
See On Amazon #7
XMHF Adjustable 2-Jaw Gear Puller Motorcycle Car Auto Removal Tool Kit for Gears, Pulley, and Flywheel
Asin: B07FY4BT8B | Model: 8542036317 | PartNumber: 8542036317 | Ean: 7679477514278
Claw Size: 10 X 3 X 0.5Cm/ 3.9 X 1.2 X 0.2 Inches(L*W*T).
Package Content: 1 X Two Jaw Puller Tool.
Weight:378G.
Dimension: 12.5 X 8 X 3Cm/ 4.9 X 3.1 X 1.2 Inches(L*W*T).
Features
- Material:Carbon Steel ; Color: Black,Brass Tone
- Dimension: 12.5 x 8 x 3cm/ 4.9 x 3.1 x 1.2 inches(L*W*T)
- Claw Size: 10 x 3 x 0.5cm/ 3.9 x 1.2 x 0.2 inches(L*W*T)
- Weight:378g
- Package Content: 1 x Two Jaw Puller Tool
- See more on Amazon...
Brand: XMHF | Manufacturer: XMHF
See On Amazon #8
ChgImposs 8 Inch CR-V 2-Jaw Gear Puller, Adjustable Bearing Puller Gears, Reversible Removal Tool for External Internal Pulling, Single Hook Two Claws Puller Tool Separate Lifting Device
Asin: B07LC7MC52 | Model: HAD_B07 | PartNumber: HAD_B07 | Ean: 4895192456799
High Quality Material - Made Of Chrome Vanadium Steel For Strength And Longevity, Heat Treatment Process Makes It More Durable..
Ease Of Use - Hexagonal Head On Spindle With A Flange, Helps Prevent The Spanner From Slipping During Operation. Button On Beam Enhances The Stability And Safety, Also Makes It Easily To Change The Puller Into Internal Or External Gear Puller..
Damage Free Removal - Removal Tool Kit For Slide Gears, Pulley, And Flywheel, Makes Removal Simple And Damage-Free. Can Be Used For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel, Car Wheel, Machine Wheel, Etc.
Adjustable Design - Adjustable Clamping Depth And Grip Width, Suitable For Different Sizes Of Gears And Bearings，Enables Many Bearings And Components To Be Dismounted.
Features
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearings enables many bearings and components to be dismounted
- High Quality Material - Made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.
- Damage Free Removal - Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc
- Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Button on beam enhances the stability and safety, also makes it easily to change the puller into internal or external gear puller.
- See more on Amazon...
Brand: ChgImposs | Manufacturer: FLXDirect
See On Amazon #9
VEVOR Gear Puller Set, 3" and 7" Puller Kit, 3 Jaw Gear Bearing Flywheel Pulley Removal Tool, 2 or 3 Reversible Jaws Wheel Puller, Vertically and Horizontally, External and Internal, 2-Piece
Asin: B0CKPLHKW3 | Model: XC6527 | PartNumber: XC6527 | Ean: 0840349968629 | UPC: 840349968629
Flexible Jaw Conversion: Effortlessly Switch Between A Two-Jaw And Three-Jaw Wheel Puller For Versatile Pulling Power. Use Two Jaws For Strong Pulling Force, Ideal For Small Bearings And Gears. Three Jaws Form A Stable Triangular Structure, Perfect For Securely Gripping Heavy Components During Disassembly..
Flexible Usage: You Can Easily Reverse Install The Jaw To Access Narrow Spaces, Making It Perfect For Grasping Small-Diameter Hollow Parts. Conversely, The Forward Jaw Is Ideal For Grabbing Large Parts And Adapting To Various Machines' Bearings And Spare Parts..
Built For Durability: Our Gear Puller Is Built To Withstand Tough Tasks. The High-Temperature Quenched Screw, Finely Processed Hook And Claw, And Industrial-Grade 45# Steel Construction Ensure Longevity. A Rust And Corrosion-Resistant Coating Adds To Its Durability..
Effortless Assembly: With Our Two-Step Quick Installation, You Can Have Your Pulley Puller Ready To Use In Just One Minute. Unlike Traditional Pullers, Our Design Minimizes The Number Of Screws And Nuts Required, Reducing The Risk Of Loose Parts During Frequent Hook Switching..
Features
- Complete 2-Piece Set: Our gear puller set comes in two convenient sizes, 3 inches and 7 inches, making it perfect for disassembling various components such as gears, pulleys, bearings, and flywheels. Whether you're a mechanic or run an auto repair shop, these tools are essential for your needs.
- Effortless Assembly: With our two-step quick installation, you can have your pulley puller ready to use in just one minute. Unlike traditional pullers, our design minimizes the number of screws and nuts required, reducing the risk of loose parts during frequent hook switching.
- Flexible Jaw Conversion: Effortlessly switch between a two-jaw and three-jaw wheel puller for versatile pulling power. Use two jaws for strong pulling force, ideal for small bearings and gears. Three jaws form a stable triangular structure, perfect for securely gripping heavy components during disassembly.
- Built for Durability: Our gear puller is built to withstand tough tasks. The high-temperature quenched screw, finely processed hook and claw, and industrial-grade 45# steel construction ensure longevity. A rust and corrosion-resistant coating adds to its durability.
- Flexible Usage: You can easily reverse install the jaw to access narrow spaces, making it perfect for grasping small-diameter hollow parts. Conversely, the forward jaw is ideal for grabbing large parts and adapting to various machines' bearings and spare parts.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Weight: 5.50 Pounds
See On Amazon #10
Thin Two jaw Bearing Puller/Remover 30mm - 90mm by U.S.PRO Tools AT091
Asin: B01M3Z5RT3 | Model: AT091 | PartNumber: AT091 | Ean: 5056133338492
Jaw Thickness: 1.5Mm.
Made From Chrome Vanadium Steel.
Applicable Bearing Dimension: 30-90Mm Diameter.
Working Depth: 93Mm.
Features
- Special Design for narrow spaces
- Working Depth: 93mm
- Jaw Thickness: 1.5mm
- Applicable bearing dimension: 30-90mm Diameter
- Made from Chrome Vanadium Steel
- See more on Amazon...
Brand: AB Tools-US Pro | Manufacturer: AB Tools-US Pro
Dimensions: 1.57 x 6.69 x 5.91 inches
See On Amazon #11
ABN Harmonic Balancer Puller 46-Piece Tool Kit Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set
Asin: B0785H4BY1 | Model: 13 | PartNumber: 13 | Ean: 0688295880417 | UPC: 688295880417
[Various Bolt Sizes] 3/8-Inch Bolt In 1-1/2, 2, 4.5, And 6 Inch Lengths, 5/16-Inch Bolt In 3, 3.5, And 6-Inch Lengths, 1/4-Inch Bolt In 2.5-Inch Length, M8 X 1.25Mm Bolt In 45, 65, And 90Mm Lengths, And M10 X 1.5Mm Bolt In 35Mm Length; Bolts Come In A Mixture Of 16, 18, 24, And 28 Thread Pitch.
[Package Contents] Crank Pulley Puller Tool Wheel Balancer Gear Puller Set Include (1) 5 Inch Long 3/4-Inch Pressure Screw, (30) Bolts, (1) Steel Yoke, (2) Centering Adapters, (1) Flat Shaft Adapter, (11) Different Sized Washers, And (1) Carrying Case For Your Convenience.
[Built To Last] Heat-Treated Carbon Steel Ensures Maximum Strength; Chrome And Black Oxide Finishes Resist Rust And Corrosion; Heavy-Duty Blow-Molded Carrying Case Provides Easy Transportation, Safe Storage, And Quick Organization.
[Fits Your Vehicle Needs] Steel Yoke With 4 Slots And 30 Harmonic Balance Puller Bolts Allow You Maximum Versatility To Handle A Range Of Jobs On Most Cars, Trucks, Suvs, And Small Engine Vehicles.
Features
- [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts
- [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles
- [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length; Bolts come in a mixture of 16, 18, 24, and 28 thread pitch
- [Built to Last] Heat-treated carbon steel ensures maximum strength; Chrome and black oxide finishes resist rust and corrosion; Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization
- [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 1.80 x 10.75 x 8.10 inches | Weight: 2.16 pounds
See On Amazon #12
DURATECH 4-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel
Asin: B08G8TLNF5 | Model: DT3JGP04 | PartNumber: DT3JGP04 | Ean: 0820909680833 | UPC: 820909680833
Each Of The Three 3-Jaw Gear And Bearing Pullers Can Be Reversed To Pull Parts From Either The Inside Or Outside. Universal 4-Position Reversible Jaws Offer An Inside Or Outside Grip With Short, Standard Reach..
Jaw Spread: 4In, Jaw Reach: 4-29/32In, Puller: 4T, Maximum Use Range: 100Mm. Perfect For You To Smoothly And Safely Slide Gear, Pulley, Bearing, And Flywheel Off The Shaft. Free Replacement Insures Your Duratech Wrenches Purchase Against Manufacturer Defects..
Th Three-Jaw Design Balances The Pulling Force Well, And Claws Are Precisely Machined To Give A Non-Slip And Secure Grip On The Gears. Make It Deal For Pulling Work In Confined Areas..
Three Jaws Come With Fine Chrome Plating To Provide Reliable And Effective Rust And Corrosion Protection. The Drive Screw Is Covered By Black Phosphating, Which Provides Maximum Strength And Longevity To The Gear Puller, Puller Jaws Allow For Easy Gripping And Access To Tight Spaces. No Need To Assemble Yourself Is The Advantage Of Duratech..
Features
- Drop-forged CR-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.
- Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphating, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.
- Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4-position reversible jaws offer an inside or outside grip with short, standard reach.
- Th three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas.
- Jaw Spread: 4in, Jaw Reach: 4-29/32in, Puller: 4T, Maximum use range: 100mm. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects.
- See more on Amazon...
Brand: DURATECH | Manufacturer: LONGYOU YIYANG IMPORT AND EXPORT CO.,LTD
See On Amazon #13
ABN 8in 3-Jaw Gear Puller Removal Tool for Slide Gears, Pulley, and Flywheel
Asin: B077KCPN4S | Model: ABN-9602 | PartNumber: ABN-9602 | Ean: 0688295879602 | UPC: 688295879602
[Multi-Position Design]: Universal Pulley Puller Tool Has Reversible Jaws That Switch From Inside To Outside Grip In Short Or Long Reach Lengths For Maximum Versatility; Reach Measures In 4 Lengths From 6.25-Inches To 8-Inches (15.9 To 20.3Cm).
[Works With Your Existing Tools]: 9.5-Inch (241.3Mm) Tall Hex Head Screw Fits Any 19Mm Hand Wrench, Ratchet, Or Combination Spanner For Gear And Bearing Removal.
[Built To Last]: Forged And Hardened Steel Provide Maximum Strength And Longevity To The Gear Puller Sets; Slim Puller Jaws Allow For Easy Gripping And Access To Tight Spaces While The Steel Center Bolt And Acme-Thread Offer Smooth Operation.
[Damage-Free Removal]: Manual Bearing Puller Removes Slide Gears, Pulleys, Bearings, Bushings, And Flywheels Without Causing Damage To Your Application.
Features
- [Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
- [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
- [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm)
- [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
- [Works with your Existing Tools]: 9.5-inch (241.3mm) tall hex head screw fits any 19mm hand wrench, ratchet, or combination spanner for gear and bearing removal
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 5.25 x 11.25 x 4.75 inches | Weight: 6.42 Pounds
See On Amazon #14
VEVOR Gear Puller Set, 3" 4" 6" 8" Puller Kit, 3 Jaw Gear Bearing Flywheel Pulley Removal Tool, 2 or 3 Reversible Jaws Wheel Puller, Vertically and Horizontally, External and Internal, 4-Piece
Asin: B0CF15TMFY | Model: 8625-4 | PartNumber: 8625-4 | Ean: 0840349946085 | UPC: 840349946085
Reversible Jaw Design: Install The Jaws In Reverse For Better Grip On Small-Diameter Hollow Components In Narrow Spaces. Install The Jaws In The Forward Direction To Effortlessly Grasp Larger Components And Adapt To Various Machine Parts. With Double Hole Adjustment, The Hook Claw Range Is Expanded, Making It More Adaptable..
Industrial Grade Strength: This Screw Rod Has Been Quenched And Forged At High Temperatures To Make It Incredibly Durable. The Jaws Have Undergone Precision Processing To Ensure A Strong Grip. Made From Tough Industrial Grade 45# Steel, Our Gear Puller Set Boasts A Rust And Corrosion-Resistant Coating For Added Longevity..
Enhanced Durability: Thanks To The Addition Of 12 Locking Nuts That Strengthen The Connection Between The Jaws And Reduce The Risk Of Detachment Over Time Or During Conversions. You Can Expect A Reliable, High-Quality Product That Will Last..
Flexible Jaw Conversion: Effortlessly Switch Between A Two-Jaw And Three-Jaw Pulley Puller For Versatile Pulling Power. Use Two Jaws For Strong Pulling Force, Ideal For Small Bearings And Gears. Three Jaws Form A Stable Triangular Structure, Perfect For Securely Gripping Heavy Components During Disassembly..
Features
- Complete 4-Piece Set: Get the job done right with our professional 4-piece gear puller set. The kit includes 4 pcs gear puller with different Max. Spread (3", 4", 6", and 8") to handle a wide range of disassembly work like gears, pulleys, bearings, and flywheels. Perfect for mechanics, repair garages, and more.
- Flexible Jaw Conversion: Effortlessly switch between a two-jaw and three-jaw pulley puller for versatile pulling power. Use two jaws for strong pulling force, ideal for small bearings and gears. Three jaws form a stable triangular structure, perfect for securely gripping heavy components during disassembly.
- Reversible Jaw Design: Install the jaws in reverse for better grip on small-diameter hollow components in narrow spaces. Install the jaws in the forward direction to effortlessly grasp larger components and adapt to various machine parts. With double hole adjustment, the hook claw range is expanded, making it more adaptable.
- Enhanced Durability: Thanks to the addition of 12 locking nuts that strengthen the connection between the jaws and reduce the risk of detachment over time or during conversions. You can expect a reliable, high-quality product that will last.
- Industrial Grade Strength: This screw rod has been quenched and forged at high temperatures to make it incredibly durable. The jaws have undergone precision processing to ensure a strong grip. Made from tough industrial grade 45# steel, our gear puller set boasts a rust and corrosion-resistant coating for added longevity.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
See On Amazon #15
TIOIT COEME 2 jaw Bearing Puller, Adjustable Two Jaw Puller Tool for Removal Small Bearing or Gears, Pulley, and Flywheel 30mm - 90mm
Asin: B08L3FHRD8 | Model: 2 Jaw Bearing Puller-3171 | PartNumber: 2 Jaw Bearing Puller-3171 | Ean: 0779776902565 | UPC: 779776902565
Adjustable: 2 Jaw Bearing Remover Can Adjust The Clamping Depth. Adjustable Diameter 30-90Mm. Have Reversible Claw Legs Make It Suitable For Use As An Internal Or External Bearing Puller. The Reasonable Design Of The Claw Will Not Fall Off When Force Is Applied..
Quality Assurance: 100% Satisfactory Service. We Value Your Shopping Experience And Strive To Offer A High-Quality Product And Service. If You're Not Completely Satisfied, You Can Ask For A Replacement Or Full Refund..
Get Into Tight Areas: This 2 Jaw Puller Tool Can Remove Bearing Or Gears, Pulleys And Flywheels Off A Shaft In Hard-To-Reach Spots Without Damage Your Application..
High Quality: The 2 Jaw Bearing Puller Is Made Of High-Strength And Heat-Treated Chrome-Vanadium Steel, And The Heavy-Duty Structure Has Strength And Durability Well As Rust And Corrosion Resistance..
Features
- WIDELY USE: This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.
- HIGH QUALITY: The 2 jaw bearing puller is made of high-strength and heat-treated chrome-vanadium steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.
- ADJUSTABLE: 2 jaw bearing Remover can adjust the clamping depth. Adjustable Diameter 30-90mm. have Reversible claw legs make it suitable for use as an internal or external bearing puller. The reasonable design of the claw will not fall off when force is applied.
- GET INTO TIGHT AREAS: This 2 Jaw Puller Tool can remove bearing or gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application.
- QUALITY ASSURANCE: 100% satisfactory service. We value your shopping experience and strive to offer a high-quality product and service. If you're not completely satisfied, you can ask for a replacement or full refund.
- See more on Amazon...
Brand: TIOIT COEME | Manufacturer: TIOIT
See On Amazon #16
ABN Bearing Puller with 1/2in to 4-5/8in Jaw Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator
Asin: B074XF8JF7 | Model: 6878 | PartNumber: 6878 | Ean: 0688295876878 | UPC: 688295876878
Durable For Heavy-Duty Applications: Constructed From Heat-Treated And Chrome-Plated Steel With A Black Oxide Finish For Rust-Resistance, Strength, And Longevity.
Specifications: 4-5/8” Inches Maximum Spread; 1/2" Inch Minimum Spread; Approximate 5/8" Inch -18 Threaded Holes For The Push/Puller; Approximate 4-3/8” Inches Distance Between Adjusting Screws.
Advanced Design Features: Knife-Like Sharp Angled Edges On Tapered Bevel Which Are Easily Placed Behind The Part To Secure A Gripping Surface, Even When Clearances Are Extremely Limited, And Gets Under Bearing Far Enough To Not Damage Bearing When Pulling; Splitter Halves Include Sae Standard Threaded Holes For The Acceptance Of Pushing Or Pulling Attachments (Not Included).
Versatile Uses: Removes Bearings, Pinions, Gears, Pulleys, Steering Wheels, And Fittings From Shafts; For Automobiles, Atvs, And Power Sport Vehicles.
Features
- PRACTICAL DAMAGE-FREE SEPARATOR: The ABN Bearing Puller with 1/2" to 4-5/8 Inch Jaw Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator professionally applies even pressure to smoothly separate bearings and remove gears without damage
- VERSATILE USES: Removes bearings, pinions, gears, pulleys, steering wheels, and fittings from shafts; For automobiles, ATVs, and power sport vehicles
- DURABLE FOR HEAVY-DUTY APPLICATIONS: Constructed from heat-treated and chrome-plated steel with a black oxide finish for rust-resistance, strength, and longevity
- ADVANCED DESIGN FEATURES: Knife-like sharp angled edges on tapered bevel which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited, and gets under bearing far enough to not damage bearing when pulling; Splitter halves include SAE standard threaded holes for the acceptance of pushing or pulling attachments (not included)
- SPECIFICATIONS: 4-5/8 inches maximum spread; 1/2 inch minimum spread; Approximate 5/8 inch -18 threaded holes for the push/puller; Approximate 4-3/8 inches distance between adjusting screws
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 1.25 x 9.00 x 7.50 inches | Weight: 5.75 pounds
See On Amazon #17
VEVOR Hydraulic Gear Puller, 5 Ton Max Capacity Wheel Bearing Pulling Separator, 2 or 3 Jaws Puller, Vertically and Horizontally, 8" Jaw Hydraulic Puller with Case for Pulling Hubs
Asin: B0CF18PNDT | Model: YL-5T | PartNumber: YL-5T | Ean: 0840349945996 | UPC: 840349945996
Horizontal And Vertical Operation: This Gear Puller Allows Horizontal And Vertical Pulling Operations, Making Working On Machine Components Facing Different Directions Convenient. The Included Extended Handle Ensures More Flexible And Labor-Saving Operation..
Industrial-Grade Strength: The Pump Body Is Forged Through High-Temperature Quenching, Ensuring It Remains Sturdy Even After Long-Term Use, Without Deformation Or Bending. The Finely Processed Jaws Deliver Stronger Grip Strength. The Whole Hydraulic Pulley Puller Is Crafted From Industrial-Grade Steel With A High-Quality Rust And Corrosion-Resistant Coating..
Flexible Jaw Conversion: Easily Switch Between A Two-Jaw Or A Three-Jaw Wheel Puller As Needed. Two Jaws Provide Stronger Pulling Force And Quick Extraction Of Small Bearings And Gears. (For Operational Stability, Install The Two Claws Diagonally.) The Three-Claw Gear Puller Forms A Triangular Structure, Providing More Uniform Tension, And Is Ideal For Firmly Grasping Heavy And Large Components During Disassembly..
Leak-Proof Design: The Integrated Casting Oil Cylinder And Oil Cover Effectively Prevent Cracking And Oil Leakage. The Thickened Pump Body With Clear Threads On The Surface Provides High Torque And A Maximum Stroke Of 2 Inches / 50 Mm, Allowing For Closer To The Target Object, Enabling A Shorter Stroke And More Efficient Pulling Process..
Features
- 5T Pulling Capacity: If you need to disassemble large machine parts quickly and efficiently, the 5T hydraulic claw puller is the perfect tool. It has a maximum pull size of 8 inches (228.6 mm), making it suitable for machine repair, bearing and gear removal, pulley removal, railway and ship repair, mine equipment maintenance, and more.
- Leak-Proof Design: The integrated casting oil cylinder and oil cover effectively prevent cracking and oil leakage. The thickened pump body with clear threads on the surface provides high torque and a maximum stroke of 2 inches / 50 mm, allowing for closer to the target object, enabling a shorter stroke and more efficient pulling process.
- Horizontal and Vertical Operation: This gear puller allows horizontal and vertical pulling operations, making working on machine components facing different directions convenient. The included extended handle ensures more flexible and labor-saving operation.
- Flexible Jaw Conversion: Easily switch between a two-jaw or a three-jaw wheel puller as needed. Two jaws provide stronger pulling force and quick extraction of small bearings and gears. (For operational stability, install the two claws diagonally.) The three-claw gear puller forms a triangular structure, providing more uniform tension, and is ideal for firmly grasping heavy and large components during disassembly.
- Industrial-Grade Strength: The pump body is forged through high-temperature quenching, ensuring it remains sturdy even after long-term use, without deformation or bending. The finely processed jaws deliver stronger grip strength. The whole hydraulic pulley puller is crafted from industrial-grade steel with a high-quality rust and corrosion-resistant coating.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Weight: 14.99 Pounds
See On Amazon #18
ARES 15036 - Reversible 2/3 Jaw 2-Ton Ratcheting Gear Puller - Chrome Moly Steel Construction - 2-Inch to 3-Inch Adjustable Range - Removes Gears, Pulleys, and Flywheels
Asin: B0868ZGYX7 | Ean: 0840129900351 | UPC: 840129900351
Common Applications: The Super Strong Low Profile Foot Design Allows For Access To Tight Or Confined Spaces That Traditional Pullers Just Can't Reach, As This Versatile Gear Puller Allows You To Smoothly And Safely Slide Gears, Pulleys, Flywheels And Other Press-Fit Parts Off Shaft..
Aspca Business Ambassador: We Are Proud To Be Part Of The Aspca Business Ambassador Program. If You Have A Pet, You Realize They Are More Than A Pet, They Are Part Of The Family. With Your Support, We’Re Proud To Help This Great Organization..
Reliable | Effective | Efficient: Users Trust Ares To Be Quality Tools. You Are Backed By Our Performance Assurance Limited Lifetime Warranty. If You Have Any Issues With Your Ares Ratcheting Gear Puller, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund..
Design Considerations: The 2-Ton Ratcheting Gear Puller Features High Strength Chrome Moly Steel Construction And A Manganese Phosphate Coating To Help Prevent Rust And Corrosion. Our Design Enables The 3-Jaw Gear Puller To Quickly Convert To A Reversible Gear Puller Or A 2-Jaw Gear Puller In No Time, And The Finely Threaded Center Screw Allows For Enhanced Pulling Power..
Features
- ITEM SPECIFICATIONS: Our 2/3 Jaw 2-Ton Ratcheting Gear Puller features three jaws and has an adjustable range of 2 to 3 inches. The smooth ratcheting action makes making adjustments a breeze, as the locking ratchet design holds the clamp open for easy installation.
- DESIGN CONSIDERATIONS: The 2-Ton Ratcheting Gear Puller features high strength Chrome Moly Steel construction and a Manganese Phosphate coating to help prevent rust and corrosion. Our design enables the 3-jaw gear puller to quickly convert to a reversible gear puller or a 2-jaw gear puller in no time, and the finely threaded center screw allows for enhanced pulling power.
- COMMON APPLICATIONS: The super strong low profile foot design allows for access to tight or confined spaces that traditional pullers just can't reach, as this versatile gear puller allows you to smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Ratcheting Gear Puller, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we re proud to help this great organization.
- See more on Amazon...
Brand: ARES | Manufacturer: ARES
Dimensions: 2.70 x 7.20 x 5.50 Inches
See On Amazon #19
ChgImposs 10 Inch 2-Jaw Gear Puller, Adjustable CR-V Bearing Puller Gears, Removal Tool for External Internal Pulling, Puller Tool Separate Lifting Device
Asin: B0BZ832P52 | Model: EPC_HAD_B0N | PartNumber: EPC_HAD_B0N
Adjustable Design - Adjustable Clamping Depth And Grip Width, Suitable For Different Sizes Of Gears And Bearings，Enables Many Bearings And Components To Be Dismounted.
Ease Of Use - Hexagonal Head On Spindle With A Flange, Helps Prevent The Spanner From Slipping During Operation. Button On Beam Enhances The Stability And Safety, Also Makes It Easily To Change The Puller Into Internal Or External Gear Puller..
Damage Free Removal - Removal Tool Kit For Slide Gears, Pulley, And Flywheel, Makes Removal Simple And Damage-Free. Can Be Used For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel, Car Wheel, Machine Wheel, Etc.
Multi-Purpose Reversible Jaw Puller - The Two Arms Of The Puller Can Be Mounted With The Claws Facing Inside Or Facing Outside, Suit For Internal And External Pulling Of Bearings And Other Components..
Features
- High Quality Material - Made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearings enables many bearings and components to be dismounted
- Damage Free Removal - Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc
- Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Button on beam enhances the stability and safety, also makes it easily to change the puller into internal or external gear puller.
- See more on Amazon...
Brand: ChgImposs | Manufacturer: FLXDirect
Dimensions: 1.30 x 11.00 x 10.00 inches
Warranty: This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.
See On Amazon #20
NMAZA 3 Jaw 10 Inch Hydraulic Gear Puller 10Ton Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine M/Case
Asin: B07XD5P1B2 | Ean: 0079747127226 | UPC: 079747127226
【Compact & Lightweight】: The Integral Puller Is Compact And Lightweight, Packed In Blow Mould Carrying Case, Easy For You To Transport Or Storage.
【Wide Application】: This Great Wheel Bearing Hub Removal Tool Has Wide Appication, Which Is Suitable For Pulling Hubs Flanges, Gears And Bearings.
【Easy To Use】-Easy To Carry And Operate, Portable Structure Is Easy For Carrying And Operation.
【3 In 1 Design】:This Wheel Bearing Pulling Separator Integrates Pumps, Oil Tube And Drawing Machine. Its Forged Steel 2 Way Yoke Allows Twin Or Triple Leg Pulls, The 3 Jaw Types Can Be Adjusted From High To Low Point. Pump Head Can Be Turned By 360°For Flexibility.
Features
- POWERFUL TOOL : This Hydraulic Gear Puller has 10 Ton Max Capacity and 2"(50mm) Ares Travel with spread10" ( 250mm) which can meet your working requirements
- 3 IN 1 DESIGN :This Wheel Bearing Pulling Separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360 for flexibility
- COMPACT & LIGHTWEIGHT : The integral puller is compact and lightweight, Packed in blow mould carrying case, easy for you to transport or storage
- EASY TO USE -Easy to carry and operate, portable structure is easy for carrying and operation
- WIDE APPLICATION : This great Wheel Bearing Hub Removal Tool has wide appication, which is suitable for pulling hubs flanges, gears and bearings
- See more on Amazon...
Brand: NMAZA | Manufacturer: NBMAZAK
Dimensions: 3.60 x 18.50 x 8.70 inches
See On Amazon
Looking For Something Else?
Search