ANCEL Automotive Circuit Tester Kit - Voltage, Short, Relay, Fuse Tester with Thermometer for Cars and Trailers
Asin: B078GPS6KV | Model: 13 | PartNumber: 13 | Ean: 0608410128071 | UPC: 608410128071
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Easy To Use】Ancel Provides How-To Guides And Video Tutorials To Help You Easily Complete Your Repair Work. With The Press Of A Switch, You'll Have An Instant Hot Lead Or Ground Lead. Use The Probe Tip And Ground Lead Simultaneously To Power Up Components Right In Your Hand. Instantly Check Components For Continuity As Well As Identify Positive, Negative And Open Circuits. Locate Shorts Without Wasting Fuses. 👉Tip: The Probe Is On The Back Of The Device..
【Accessory Replacement & 1 Year Warranty】If You Lose The Parts Of Your Pb100, You Can Contact Ancel Customer Service For A Replacement. We Provides 1 Year Warranty, 60 Days No-Reason-Asked Return For Refund. And There Is A Technical Support For Timely And Effectively Solving The Quality Problem Within 24 Hours..
【Circuit Protection】The Pb100 Has A Built-In 8-Amp Circuit Breaker To Prevent Circuit Overload And Overheating. Unlike A Normal Test Lamp, This Device Can Conduct Direct Battery Current Into The Circuit You Touch With It. Any Time You Backfeed A Circuit, You Need To Know What You Are Doing. The Breaker Will Protect The Circuit, But 8 Amps Is Still Enough To Do A Lot Of Damage With The Wrong Wire..
【Trailer Wiring】A Recurring Source Of Frustration For Technicians Across The Country, Especially Those Who Service Trailers Exposed To Road Salt Or Salt Water. The Pb100 Circuit Tester Features A Long 20-Foot Cable That Allows You To Make The Initial Connection Directly To The Vehicle's Battery, While Providing Easy Access To Connect The Trailer Harness At The Rear Of The Vehicle..
【Voltage Indicator】The Led Indicator On The Front Of The Unit Will Show You The Battery Voltage When It Is Connected. You Can Use It To Determine A Whole Range Of Things. You Can Even Do A Quick Check Of The Alternator By Plugging It In And Starting The Car. The Voltage Should Go From About 12.6 Volts To 14.0 Volts. This Is Also Useful If You Have A Situation Where A Power Supply Has A Large Voltage Drop, If You Notice Low Voltage On Certain Branches When Checking Fuses, Etc..
【What Does It Do?】The Pb100 Is An Essential Tool For Automobile User. It Is Needed For Testing Components On And Off The Vehicle, Checking For The Good And Bad Grounds, Testing For Continuity And Diagnosing Circuit Failures. For Example, You Can Use It To Turn On A Blower Motor. You Can Run Power Window Motors, Windshield Wipers, And Even Rear Window Defrosters. If The Vehicle Owner Keeps It In His Car He Can Check System Failure On His Own Way No Need To Go To Technician..
Features
- What is a PB100 Probe Tester? With the PB100 probe tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device.
- What does it do? The PB100 is an essential tool for automobile user. It is needed for testing components on and off the vehicle, checking for the good and bad grounds, testing for continuity and diagnosing circuit failures. For example, you can use it to turn on a blower motor. You can run power window motors, windshield wipers, and even rear window defrosters. If the vehicle owner keeps it in his car he can check system failure on his own way no need to go to technician.
- Easy to Use ANCEL provides how-to guides and video tutorials to help you easily complete your repair work. With the press of a switch, you'll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits. Locate shorts without wasting fuses. TIP: The probe is on the back of the device.
- Voltage Indicator The LED indicator on the front of the unit will show you the battery voltage when it is connected. You can use it to determine a whole range of things. You can even do a quick check of the alternator by plugging it in and starting the car. The voltage should go from about 12.6 volts to 14.0 volts. This is also useful if you have a situation where a power supply has a large voltage drop, if you notice low voltage on certain branches when checking fuses, etc.
- Circuit Protection The PB100 has a built-in 8-amp circuit breaker to prevent circuit overload and overheating. Unlike a normal test lamp, this device can conduct direct battery current into the circuit you touch with it. Any time you backfeed a circuit, you need to know what you are doing. The breaker will protect the circuit, but 8 amps is still enough to do a lot of damage with the wrong wire.
- Trailer Wiring A recurring source of frustration for technicians across the country, especially those who service trailers exposed to road salt or salt water. The PB100 Circuit Tester features a long 20-foot cable that allows you to make the initial connection directly to the vehicle's battery, while providing easy access to connect the trailer harness at the rear of the vehicle.
- Accessory Replacement & 1 Year Warranty If you lose the parts of your PB100, you can contact ANCEL customer service for a replacement. We provides 1 Year warranty, 60 Days No-Reason-asked Return for refund. And there is a technical support for timely and effectively solving the quality problem within 24 Hours.
- See more on Amazon...
Brand: ANCEL | Manufacturer: ANCEL
Dimensions: 2.90 x 10.20 x 8.70 Inches | Weight: 2.65 Pounds
See On Amazon Similar To ANCEL Automotive Circuit Tester Kit
#1
ANCEL BST200 Car Battery Tester 12V 100-2000 CCA Automotive Bad Cell Load Test Tool Digital Analyzer Tester for Car Truck Motorcycle SUV Boat and More
Asin: B07Q6NBXQG | Model: BST200 | PartNumber: BST200
🚗Display Overall Batteries Data: The Vehicle Battery Tester Tool Professionally Test Your Battery, Giving You The Volt, Measured Value, Rating, Soc And Soh Values. What's More, It Will Give You Accurate Advice On Your Electricity, After The Test You Will Get One Of The 5 Test Results Directly: [Good Battery][Good-Recharge][Charge & Retest][Replace Battery][Bad Cell-Replace]. Lets You Know The Exact Condition Of Your Battery..
👍Easy To Use & Plug And Play: Instant-On And Ready-To-Use. Bst200 Battery Load Tester Has Four Simple Buttons: Up, Down, Esc, And Enter, That Are Easy To Understand And Operate, Plug And Play.Easy To Read,After Properly Connecting The Positive(+) And Negative(-) Poles With The Test Cable, The Tester Can Immediately Read The Voltage Value..
👆Easy To Carry: Only 103*75*20Mm In Size, Weighs 0.2Kg. It Is Available In English, Spanish, French, And German In A Total Of 8 Languages. Ancel Bst200 Car Battery Load Tester, Small But Useful. Your Pocket Testing Helper!.
🔋Check Battery Life: Ancel Bst200 Battery Analyzer Lets You Know If Your Battery Is In Good Condition, Has Enough Power, Or Needs Recharging. The Soc (State Of Charge) Indicator Of Battery Reflects The Remaining Capacity Of The Battery， Soc = 0 (Fully Discharged), Soc = 100% (Fully Charged). The Soh (State Of Health) Indicator Reflects The Current Operating Capacity And Remaining Life Of The Battery..
✅Faster & More Accurate: Ancel Bst200 Automotive Battery Tester Helps You To Quickly Detect Battery Faults So That You Can Replace It In Time For The Warranty Period. Whether It's A Hot Summer Day Or A Cold Winter Day, You Can Choose To Test Your Battery Out Of Vehicle Or In Vehicle, Which Is Convenient And Saves Your Time And Money..
Features
- WIDER TESTING RANGE: ANCEL BST200 Battery Cell Tester of automotive works on 12V lead-acid batteries, including regular flooded, AGM flat plate, AGM spiral, and GEL batteries for cars, RV, SUV, motorcycle, boats, light truck, and even golf carts.Gives you an accurate result in merely seconds, such as CCA value, CCA rating, voltage, internal resistance, state of health, and state of charge, based on the rating standard of CCA, CA, MCA, JIS, DIN, IEC, EN and SAE.
- FASTER & MORE ACCURATE: ANCEL BST200 Automotive Battery Tester helps you to quickly detect battery faults so that you can replace it in time for the warranty period. Whether it's a hot summer day or a cold winter day, you can choose to test your battery OUT OF VEHICLE or IN VEHICLE, which is convenient and SAVES your TIME and MONEY.
- DISPLAY OVERALL BATTERIES DATA: The Vehicle Battery Tester Tool professionally test your battery, giving you the volt, measured value, rating, SOC and SOH values. What's more, it will give you accurate advice on your electricity, after the test you will get one of the 5 test results directly: [GOOD BATTERY][GOOD-RECHARGE][CHARGE & RETEST][REPLACE BATTERY][BAD CELL-REPLACE]. Lets you know the exact condition of your battery.
- CHECK BATTERY LIFE: ANCEL BST200 Battery Analyzer lets you know if your battery is in good condition, has enough power, or needs recharging. The SOC (State of Charge) indicator of battery reflects the remaining capacity of the battery SOC = 0 (fully discharged), SOC = 100% (fully charged). The SOH (State of Health) indicator reflects the current operating capacity and remaining life of the battery.
- EASY TO USE & PLUG AND PLAY: Instant-on and ready-to-use. BST200 Battery Load Tester has four simple buttons: UP, DOWN, ESC, and ENTER, that are easy to understand and operate, Plug and Play.Easy to read,After properly connecting the Positive(+) and Negative(-) poles with the test cable, the tester can immediately read the voltage value.
- EASY TO CARRY: Only 103*75*20mm in size, weighs 0.2kg. It is available in English, Spanish, French, and German in a total of 8 languages. ANCEL BST200 Car Battery Load Tester, small but useful. Your pocket testing helper!
- See more on Amazon...
Brand: ANCEL | Manufacturer: ANCEL
Dimensions: 0.79 x 4.06 x 2.95 Inches | Weight: 0.38 pounds
See On Amazon #2
ANCEL BA301 6V 12V Car Battery Tester, 100-2000 CCA Automotive Load Tester Alternator Tester Auto Digital Battery Analyzer Cranking and Charging System Test Tool for Motorcycle Car Boat Truck SUV ATV
Asin: B08F9SBXN9 | Model: BA301 | PartNumber: BA301 | Ean: 6976500970140
✅【One-Key Waveform Analysis】The One-Click "Waveform" Function Allows You To Plot The Voltage Changes (Current-Voltage, Maximum Voltage, And Minimum Voltage) During Ignition On A Graph With One Click. For The Beginners, The Exclusive Function Helps To Track The Real-Time Voltage Changing To Find The Battery Issue, For The Professional Repair Store, It's Continuous Voltage Monitoring Results Can Be Uploaded To Computer Then Compare It To Achieve The Analysis Of In-Car Systems..
✅【 Color Indicator Light + Printing 】 The Ba301 Automotive Car Battery Analyzer Provides You With Convenient Battery System Testing. It Has Three Led Lights, Which Are Green, Yellow, And Red, To Indicate The Different Health States Of The Battery, Alternator And Starter. In Addition, You Can Also Save, Review, And Transfer Test Results To Your Computer For Printing And Further Analysis..
✅【Various Usage Scenario + Suitable For Diyer And Professional Repair Technicians】 High Quality High-Definition Full Color Lcd Screen, Clear And Easy To Read, Providing A Good Visual Experience. The Product Is Compact In Design, Making It Easy For You To Carry And Store With You. The Ba301 Battery Load Analyzer Can Test Batteries Both Inside And Outside The Vehicle. Simply Connect The Tester's Clamp To The Battery And It Will Open, Ready To Test And Analyze The Battery. It's So Easy To Use!.
✅【Starter& Alternator Tester】Ba301 Battery Load Tester Is Not Only An Excellent Battery Load Tester, But Can Also Test The Charging Of The Alternator And The Starting Situation Of The Starter, Helping You Determine The Abnormal Situation Of The Starting System And Charging System. At The Same Time, It Can Switch Up To 12 Languages According To Different Needs. There Are Many Battery Testing Products On The Market, Some Of Which Are Very Low In Price, But The Accuracy Of Testing Varies..
✅【Safe And Reliable】Different From Other Vehicle Battery Alternator Testers, Our Ba301 Alternator Tester For All Batteries Was Equipped With 100% High-Quality Safety Copper Clip, Which Has Reverse Polarity Protection And Spark-Proof Function, Over-Voltage Protection And Automatic Temperature Compensation.Which Can Achieve Stable And Safe Connection During The Test. And Ba301 Can Directly Test The Batteries With Loss Of Electricity (Not Required Full Charge) And Even The Bad Cell Batteries..
✅【Display Overall Batteries Data】Except Give You The Basic Battery Parameters Such As Voltage, Internal Resistance, Cold Cranking Amp, Battery Health And Charge Status,Etc. Ba 301 Battery Testers Will Also Give Professional Advice Based On These Data Then You Can Decide Whether To Replace Or Charge The Battery, Help You Know Battery Status In Advance To Prevent Possible Battery Failures. It's Much More Convenient Than Driving Miles To Find The Nearby Auto Repair Shop..
✅【The Best Accurate Battery Test】 Ba301 Battery Load Tester Adopsadvanced Conductivity Testing Technologyand Intelligent Chips, Testing Result Up To 99.96% Accuracy, To Easily,Quickly And Accurately Measure The Actual Cold Start Current Performance, Healthy State And Aging Degree Of Vehicle Batteries, And Common Fault Of The Vehicle Starting System And Charging System,Ba301 Provides You With Accurate Test Results In Seconds,Can Help People To Find The Find The Problem Accurately..
Features
- 6 & 12 Volts Battery Tester As the upgraded version of BA101 ,BA301 car battery tester can work on all 6V & 12V lead-acid batteries from 100 to 2000 CCA, including regular flood batteries, AGM flat batteries, AGM spiral batteries, GEL , EFB and etc. The perfect car battery tester is suitable for most vehicles, cars,motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers and even golf carts.etc, and supports most car battery standards, such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE.
- The Best Accurate Battery Test BA301 battery load tester adopsadvanced conductivity testing technologyand intelligent chips, testing result up to 99.96% accuracy, to easily,quickly and accurately measure the Actual cold start current performance, healthy state and aging degree of vehicle batteries, and common fault of the vehicle starting system and charging system,BA301 provides you with accurate test results in seconds,can help people to find the find the problem accurately.
- One-key Waveform Analysis The one-click Waveform function allows you to plot the voltage changes (current-voltage, maximum voltage, and minimum voltage) during ignition on a graph with one click. For the beginners, the exclusive function helps to track the real-time voltage changing to find the battery issue, for the professional repair store, It's continuous voltage monitoring results can be uploaded to computer then compare it to achieve the analysis of in-car systems.
- Display Overall Batteries Data Except give you the basic battery parameters such as voltage, internal resistance, cold cranking amp, battery health and charge status,Etc. BA 301 battery testers will also give professional advice based on these data then you can decide whether to replace or charge the battery, help you know battery status in advance to prevent possible battery failures. It's much more convenient than driving miles to find the nearby auto repair shop.
- Starter& Alternator Tester BA301 Battery Load Tester is not only an excellent battery load tester, but can also test the charging of the alternator and the starting situation of the starter, helping you determine the abnormal situation of the starting system and charging system. At the same time, it can switch up to 12 languages according to different needs. There are many battery testing products on the market, some of which are very low in price, but the accuracy of testing varies.
- Safe And Reliable Different from other vehicle battery alternator testers, our BA301 alternator tester for all batteries was equipped with 100% high-quality safety copper clip, which has reverse polarity protection and spark-proof function, over-voltage protection and automatic temperature compensation.which can achieve stable and safe connection during the test. And BA301 can directly test the batteries with loss of electricity (not required full charge) and even the bad cell batteries.
- Color indicator light + Printing The BA301 Automotive Car Battery Analyzer provides you with convenient battery system testing. It has three LED lights, which are green, yellow, and red, to indicate the different health states of the battery, alternator and starter. In addition, you can also save, review, and transfer test results to your computer for printing and further analysis.
- Various Usage Scenario + Suitable For DIYer And Professional Repair Technicians High quality high-definition full color LCD screen, clear and easy to read, providing a good visual experience. The product is compact in design, making it easy for you to carry and store with you. The BA301 Battery Load Analyzer can test batteries both inside and outside the vehicle. Simply connect the tester's clamp to the battery and it will open, ready to test and analyze the battery. It's so easy to use!
- See more on Amazon...
Brand: ANCEL | Manufacturer: ANCEL
Dimensions: 2.05 x 7.20 x 5.94 inches | Weight: 0.80 pounds
See On Amazon #3
[Upgrade PB100] Ancle PB500 Power Circuit Probe Tester Kit - Circuit Tester Automotive for Faster Troubleshooting AC/DC Voltage, Resistance, Diode, Signal Frequency, Duty Cycle, Fuel Injection
Asin: B0CLYFSMJ1
Efficient Circuit Tracing: Easily Trace And Identify Problem Circuits While Ruling Out Good Circuits. Save Time And Effort By Speeding Up Circuit Troubleshooting And Diagnosis..
Accessory Replacement & 1 Year Warranty: If You Lose The Parts Of Your Pb500, You Can Contact Ancel Customer Service For A Replacement. We Provides 1 Year Warranty, 60 Days No-Reason-Asked Return For Refund. And There Is A Technical Support For Timely And Effectively Solving The Quality Problem Within 24 Hours..
Reliable And Convenient: Works With A 12-24V Dc Power Source, Making It Suitable For Various Automotive Applications. Trust The Ancel Pb500 Brand For Quality And Performance In Automotive Electrical Tools..
Enhanced Diagnostic Functions: Improved Version Of Pb100 With Added Features Like Signal Frequency, Duty Cycle, And Fuel Injection Testing. Speed Up The Diagnostic Process And Pinpoint The True Cause Of Electrical Problems Effortlessly..
Features
- Versatile Power Probe Tester: Identify electrical issues quickly with AC/DC voltage, resistance, diode, signal frequency, duty cycle, and fuel injection tests. Perfect for automotive electrical troubleshooting.
- Enhanced Diagnostic Functions: Improved version of PB100 with added features like signal frequency, duty cycle, and fuel injection testing. Speed up the diagnostic process and pinpoint the true cause of electrical problems effortlessly.
- Efficient Circuit Tracing: Easily trace and identify problem circuits while ruling out good circuits. Save time and effort by speeding up circuit troubleshooting and diagnosis.
- Reliable and Convenient: Works with a 12-24V DC power source, making it suitable for various automotive applications. Trust the ANCEL PB500 brand for quality and performance in automotive electrical tools.
- Accessory Replacement & 1 Year Warranty: If you lose the parts of your PB500, you can contact ANCEL customer service for a replacement. We provides 1 Year warranty, 60 Days No-Reason-asked Return for refund. And there is a technical support for timely and effectively solving the quality problem within 24 Hours.
- See more on Amazon...
Brand: ANCEL | Manufacturer: ANCEL
Dimensions: 2.95 x 10.23 x 8.85 inches
See On Amazon #4
ANCEL BST200 12V Car Battery Load Tester and ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader
Asin: B08C4QSSWJ
✔ Gives You An Accurate Result In Just Seconds, Such As Cca Value, Cca Rating, Voltage, Internal Resistance, Health And State Of Charge, Based On The Rating Standard Of Cca, Ca, Mca, Jis, Din, Iec, En And Sae..
✔ The Small, Compact Design, Large Backlight Lcd, Clear Keypad (Up, Down, Esc, Enter Keys) And Menu-Driven Operation Make It Easy To Use. Even A Beginner Can Operate This Battery Tester Effortlessly..
✔ With The Two Test Models "Out Of Vehicle" And "In Vehicle", You Can Test The Battery Both Inside And Outside The Vehicle And Get Even More Accurate Test Data. Plus, You Do Not Need An Internal Battery And Get Power Directly From The Detected Battery..
✔ Works With 12V Lead Acid Batteries From 100 - 1100 Cca, Including Regular Flood Batteries, Agm Flat Plate Batteries, Agm Spiral Batteries And Gel For Cars, Rvs, Suvs, Motorcycles, Boats, Light Trucks And Even Golf Carts..
Features
- BST200 12V car battery tester shows you the basic battery parameters such as voltage, internal resistance, battery condition and charge status. In addition, BST200 also tells you whether you should replace or charge the battery.
- Works with 12V lead acid batteries from 100 - 1100 CCA, including regular flood batteries, AGM flat plate batteries, AGM spiral batteries and GEL for cars, RVs, SUVs, motorcycles, boats, light trucks and even golf carts.
- Gives you an accurate result in just seconds, such as CCA value, CCA rating, voltage, internal resistance, health and state of charge, based on the rating standard of CCA, CA, MCA, JIS, DIN, IEC, EN and SAE.
- With the two test models OUT OF VEHICLE and IN VEHICLE, you can test the battery both inside and outside the vehicle and get even more accurate test data. Plus, you do not need an internal battery and get power directly from the detected battery.
- The small, compact design, large backlight LCD, clear keypad (UP, DOWN, ESC, ENTER keys) and menu-driven operation make it easy to use. Even a beginner can operate this battery tester effortlessly.
- See more on Amazon...
Brand: ANCEL
See On Amazon #5
ANCEL AD410 Code Reader and ANCEL BST200 Car Battery Load Tester
Asin: B08GFGQ3SY
Enhanced Obdii Diagnostics - Supports O2 Sensor And Evap (Evaporative Control) System Test. Ad410 Code Scanner Can Be Used To Initiate A Leak Test On A Vehicle's Evap System By Monitoring The Integrity Of The Fuel Tank System. The O2 Sensor Test Is Designed To Monitor And Adjust Air/Fuel Mixture, Which Will Help Identify And Troubleshoot Issues Related To Fuel Efficiency And Vehicle Emission..
Gives You An Accurate Result In Only 3 Seconds, Such As Cca Value, Cca Rating, Voltage, Internal Resistance, State Of Health, And State Of Charge, Based On The Rating Standard Of Cca, Ca, Mca, Jis, Din, Iec, En And Sae..
Works On Automotive 12V 100 - 1100 Cca Lead-Acid Batteries, Including Regular Flooded, Agm Flat Plate, Agm Spiral, And Gel Batteries For Cars, Suv, Motorcycle, Light Truck, And More..
Critical Functionality - Reads Quickly And Erases Stored Emission-Related Codes, Pending Codes, And Shows Code Definitions. Turns Off The Mil (Check Engine Light), Helps In Resetting The Monitor Before Taking It To Smog, And Tells You What Is Going On Before Bringing The Car In For Repair..
Features
- Includes: 1 x AD410 Code Reader, 1x BST200 Battery Tester
- CRITICAL FUNCTIONALITY - Reads quickly and erases stored emission-related codes, pending codes, and shows code definitions. Turns off the MIL (check engine light), helps in resetting the monitor before taking it to Smog, and tells you what is going on before bringing the car in for repair.
- ENHANCED OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be used to initiate a leak test on a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission.
- Works on automotive 12V 100 - 1100 CCA lead-acid batteries, including regular flooded, AGM flat plate, AGM spiral, and GEL batteries for cars, SUV, motorcycle, light truck, and more.
- Gives you an accurate result in only 3 seconds, such as CCA value, CCA rating, voltage, internal resistance, state of health, and state of charge, based on the rating standard of CCA, CA, MCA, JIS, DIN, IEC, EN and SAE.
- See more on Amazon...
Brand: ANCEL
See On Amazon #6
ANCEL PB100 Automotive Power Circuit Tester Probe with ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader
Asin: B08GF7X8GD
【Voltage Indicator】The Led Indicator On The Front Of The Unit Will Show You The Battery Voltage When It Is Connected. You Can Use It To Determine A Whole Range Of Things. You Can Even Do A Quick Check Of The Alternator By Plugging It In And Starting The Car. The Voltage Should Go From About 12.6 Volts To 14.0 Volts. This Is Also Useful If You Have A Situation Where A Power Supply Has A Large Voltage Drop, If You Notice Low Voltage On Certain Branches When Checking Fuses, Etc..
【Trailer Wiring】A Recurring Source Of Frustration For Technicians Across The Country, Especially Those Who Service Trailers Exposed To Road Salt Or Salt Water. The Pb100 Circuit Tester Features A Long 20-Foot Cable That Allows You To Make The Initial Connection Directly To The Vehicle's Battery, While Providing Easy Access To Connect The Trailer Harness At The Rear Of The Vehicle..
【Circuit Protection】The Pb100 Has A Built-In 8-Amp Circuit Breaker To Prevent Circuit Overload And Overheating. Unlike A Normal Test Lamp, This Device Can Conduct Direct Battery Current Into The Circuit You Touch With It. Any Time You Backfeed A Circuit, You Need To Know What You Are Doing. The Breaker Will Protect The Circuit, But 8 Amps Is Still Enough To Do A Lot Of Damage With The Wrong Wire..
【What Can An Ancel Pb100 Do?】In Fact, This Is A Very Handy Tool For Many Functional Circuit Tests. For Example, You Can Use It To Turn On A Blower Motor. You Can Run Power Window Motors, Windshield Wipers, And Even Rear Window Defrosters. But Be Careful When Turning On Anything With A Motor, Especially Something With A Motor-Driven Linkage..
Features
- What is a PB100 Circuit Tester? With the PB100 circuit tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device.
- What can an ANCEL PB100 do? In fact, this is a very handy tool for many functional circuit tests. For example, you can use it to turn on a blower motor. You can run power window motors, windshield wipers, and even rear window defrosters. But be careful when turning on anything with a motor, especially something with a motor-driven linkage.
- Voltage indicator The LED indicator on the front of the unit will show you the battery voltage when it is connected. You can use it to determine a whole range of things. You can even do a quick check of the alternator by plugging it in and starting the car. The voltage should go from about 12.6 volts to 14.0 volts. This is also useful if you have a situation where a power supply has a large voltage drop, if you notice low voltage on certain branches when checking fuses, etc.
- Circuit Protection The PB100 has a built-in 8-amp circuit breaker to prevent circuit overload and overheating. Unlike a normal test lamp, this device can conduct direct battery current into the circuit you touch with it. Any time you backfeed a circuit, you need to know what you are doing. The breaker will protect the circuit, but 8 amps is still enough to do a lot of damage with the wrong wire.
- Trailer Wiring A recurring source of frustration for technicians across the country, especially those who service trailers exposed to road salt or salt water. The PB100 Circuit Tester features a long 20-foot cable that allows you to make the initial connection directly to the vehicle's battery, while providing easy access to connect the trailer harness at the rear of the vehicle.
- See more on Amazon...
Brand: ANCEL
See On Amazon #7
ANCEL AD410 PRO OBD2 Scanner Battery Tester with PB100 Automotive Power Circuit Probe Tester
Asin: B0BYSTHCZH
👍Ad410 Pro Powerful Battery Testing: Battery Test Will Determine If The Battery Is In Good Working Condition. Cranking Test Will Determine If The Electrical System Has Enough Power To Start The Engine, Can Test 12V 100-2000Cca Batteries Including Regular Flooded, Agm Flat Plate, Agm Spiral Or Gel Batteries. Quickly Provide Overall Analysis Of Battery Conditions Displays Voltage Value, Standard Cca, Measured Cca, Soh, Soc, And Internal Resistance And Helps You Know Their Status In Advance..
🚗Ancel Provides How-To Guides And Video Tutorials To Help You Easily Complete Your Repair Work. With The Press Of A Switch, You'll Have An Instant Hot Lead Or Ground Lead. Use The Probe Tip And Ground Lead Simultaneously To Power Up Components Right In Your Hand. Instantly Check Components For Continuity As Well As Identify Positive, Negative And Open Circuits. Locate Shorts Without Wasting Fuses. 👉Tip: The Probe Is On The Back Of The Device..
🚗The Pb100 Is An Essential Tool For Automobile User. It Is Needed For Testing Components On And Off The Vehicle, Checking For The Good And Bad Grounds, Testing For Continuity And Diagnosing Circuit Failures. For Example, You Can Use It To Turn On A Blower Motor. You Can Run Power Window Motors, Windshield Wipers, And Even Rear Window Defrosters. If The Vehicle Owner Keeps It In His Car He Can Check System Failure On His Own Way No Need To Go To Technician..
👍Upgraded Obd2 Scanner Battery Tester: The Upgraded 2 In 1 Ancel Ad410 Pro Contains All The Basic Functions Of Ad410/Ad310 And Enhanced Obdii Diagnostic Functions, Also Adds A Powerful Battery Tester, Battery Health Test, Cranking And Charging Test, Making It A Cost-Effective Diagnostic Tool For Vehicle Diy Users And Automotive Technicians..
Features
- Includes: 1X ANCEL AD410 PRO OBD2 Scanner Battery Tester, 1X PB100 Automotive Power Circuit Probe Tester
- UPGRADED OBD2 SCANNER BATTERY TESTER: The upgraded 2 in 1 ANCEL AD410 PRO contains all the basic functions of AD410/AD310 and enhanced OBDII diagnostic functions, Also adds a powerful battery tester, battery health test, cranking and charging test, making it a cost-effective diagnostic tool for vehicle DIY users and automotive technicians.
- AD410 PRO POWERFUL BATTERY TESTING: Battery test will determine if the battery is in good working condition. Cranking test will determine if the electrical system has enough power to start the engine, can test 12V 100-2000CCA batteries including regular flooded, AGM flat plate, AGM spiral or gel batteries. Quickly provide overall analysis of battery conditions displays voltage value, standard CCA, measured CCA, SOH, SOC, and internal resistance and helps you know their status in advance.
- The PB100 is an essential tool for automobile user. It is needed for testing components on and off the vehicle, checking for the good and bad grounds, testing for continuity and diagnosing circuit failures. For example, you can use it to turn on a blower motor. You can run power window motors, windshield wipers, and even rear window defrosters. If the vehicle owner keeps it in his car he can check system failure on his own way no need to go to technician.
- ANCEL provides how-to guides and video tutorials to help you easily complete your repair work. With the press of a switch, you'll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits. Locate shorts without wasting fuses. TIP: The probe is on the back of the device.
- See more on Amazon...
Brand: ANCEL
See On Amazon #8
ANCEL BM200 Pro Car Battery Tester Battery Monitor and AD410 Pro OBD2 Scanner Diagnostic Tool Battery Tester 2 in 1
Asin: B0CG86MSXY
12V Lead-Acid Battery Monitor: Ancel Bm200 Pro Is A 12V Lead-Acid Battery Tester, Which Consists Of A Wireless Host Unit And A Wireless Display. It Can Display The Voltage, Power, Temperatureand Health Of The Battery In Real Time, Andautomatically Test The Starting And Chargingsystems Of The Vehicle. When The Temperature Is Abnormal, Low Power, Low Voltage, Startup System Failure, Charging System Exceeds The Normal Range, The Wireless Display Will Automatically Emit Alarm Sound To Remind..
Ancel Bm200 Pro Car Battery Tester Battery Monitor And 2 In 1Ad410 Pro Obd2 Scanner Diagnostic Tool Battery Tester!.
433Mhz Radio Frequency Transmission:Compared With Bluetooth, Bm 200 Pro Battery Monitor Adapt 433Mhz Rf Technology Has The Advantages Of Better Penetration Ability, Longer Signal Transmission Distance( It Can Reach Tens Of Meters), More Energy Saving And Less Signal Interference, Which Is Suitable For Data Transmission In Any Complex Environment. Such As Basement, Stairwell, Rural Areas And Any Other Places, Etc.You Do Not Need To Connect To The Network,Phone And Install The App..
Powerful Battery Testing: Battery Test Will Determine If The Battery Is In Good Working Condition. Cranking Test Will Determine If The Electrical System Has Enough Power To Start The Engine. Ad410 Pro Can Test 12V 100-2000Cca Batteries Including Regular Flooded, Agm Flat Plate, Agm Spiral Or Gel Batteries. Quickly Provide Overall Analysis Of Battery Conditions Displays Voltage Value, Standard Cca, Measured Cca, Soh, Soc, And Internal Resistance And Helps You Know Their Status In Advance..
Features
- 2 IN 1 OBD2 SCANNER BATTERY TESTER: The upgraded ANCEL AD410 Pro contains all the diagnostic functions of AD310/AD410, also adds a powerful battery tester, battery health test, cranking and charging test, making it a cost-effective diagnostic tool for Pros and DIY weekend warrior!
- POWERFUL BATTERY TESTING: Battery test will determine if the battery is in good working condition. Cranking test will determine if the electrical system has enough power to start the engine. AD410 PRO can test 12V 100-2000CCA batteries including regular flooded, AGM flat plate, AGM spiral or gel batteries. Quickly provide overall analysis of battery conditions displays voltage value, standard CCA, measured CCA, SOH, SOC, and internal resistance and helps you know their status in advance.
- 12V LEAD-ACID BATTERY MONITOR: ANCEL BM200 Pro is a 12V lead-acid battery tester, which consists of a wireless host unit and a wireless display. It can display the voltage, power, temperatureand health of the battery in real time, andautomatically test the starting and chargingsystems of the vehicle. When the temperature is abnormal, low power, low voltage, startup system failure, charging system exceeds the normal range, the wireless display will automatically emit alarm sound to remind.
- 433MHZ RADIO FREQUENCY TRANSMISSION:Compared with Bluetooth, BM 200 Pro battery monitor adapt 433MHz RF technology has the advantages of better penetration ability, longer signal transmission distance( It can reach tens of meters), more energy saving and less signal interference, which is suitable for data transmission in any complex environment. Such as basement, stairwell, rural areas and any other places, etc.You do not need to connect to the network,phone and install the app.
- ANCEL BM200 Pro Car Battery Tester Battery Monitor and 2 in 1AD410 Pro OBD2 Scanner Diagnostic Tool Battery Tester!
- See more on Amazon...
Brand: ANCEL
See On Amazon #9
ANCEL PB100 Automotive 12/24V Power Circuit Tester Probe with ANCEL BA301 6V 12V Battery Load Tester Car Cranking Charging System Test Tool
Asin: B08HV3RJ4H
4 Working Modes - Dc Voltage Mode For Reading The Dc Voltage With A Resolution Of 0.1 Volts; Ac Voltage Mode For Reading The Max. Voltage, The Min. Voltage, And Frequency; Resistance Mode For Reading The Resistance Between The Tip And Auxiliary Ground Lead; Diode Mode For Checking Forward Bias Or Reverse Bias..
Features One-Click "Waveform" To Record The Voltage Changes (Current Voltage, Maximum And Minimum Voltage) In A Graph During Ignition. You'll Know If The Battery Needs To Be Replaced Or Not Through Analyzing The Values Of Discharge Voltage, Starting Voltage, And Charging Voltage..
Works On All 6V & 12V 100 - 2000 Cca Lead-Acid Batteries, Analyzes Starter Cranking And Alternator Charging Condition. Cranking Test To Test And Analyze The Starting Motor (Cranking Time, Voltage, And Status), And The Charging Test To Check And Analyze The Charging System (Load Voltage, Unloaded Voltage, Ripple Status, Charging System Status)..
A Must-Have Tool - Designed For Voltage & Polarity Testing, Continuity Testing, Signal Circuit Testing, Supply Power/Activating Components, Trailer Lights & Connections Testing. It Features Red/Green Polarity Indicators, Follows & Locates Short Circuits, And Checks Bad Ground Contacts..
Features
- Includes: 1 x PB100 Circuit Tester, 1x BA301 Battery Tester
- A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts.
- 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts; AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency; Resistance mode for reading the resistance between the tip and auxiliary ground lead; Diode mode for checking forward bias or reverse bias.
- Works on all 6V & 12V 100 - 2000 CCA lead-acid batteries, analyzes starter cranking and alternator charging condition. Cranking test to test and analyze the starting motor (cranking time, voltage, and status), and the charging test to check and analyze the charging system (load voltage, unloaded voltage, ripple status, charging system status).
- Features one-click waveform to record the voltage changes (current voltage, maximum and minimum voltage) in a graph during ignition. You'll know if the battery needs to be replaced or not through analyzing the values of discharge voltage, starting voltage, and charging voltage.
- See more on Amazon...
Brand: ANCEL
See On Amazon #10
ANCEL PB100 Automotive Power Circuit Tester Probe with ANCEL AD410 Enhanced OBD II Vehicle Code Reader
Asin: B08GFT6CBP
【Voltage Indicator】The Led Indicator On The Front Of The Unit Will Show You The Battery Voltage When It Is Connected. You Can Use It To Determine A Whole Range Of Things. You Can Even Do A Quick Check Of The Alternator By Plugging It In And Starting The Car. The Voltage Should Go From About 12.6 Volts To 14.0 Volts. This Is Also Useful If You Have A Situation Where A Power Supply Has A Large Voltage Drop, If You Notice Low Voltage On Certain Branches When Checking Fuses, Etc..
【Trailer Wiring】A Recurring Source Of Frustration For Technicians Across The Country, Especially Those Who Service Trailers Exposed To Road Salt Or Salt Water. The Pb100 Circuit Tester Features A Long 20-Foot Cable That Allows You To Make The Initial Connection Directly To The Vehicle's Battery, While Providing Easy Access To Connect The Trailer Harness At The Rear Of The Vehicle..
【Circuit Protection】The Pb100 Has A Built-In 8-Amp Circuit Breaker To Prevent Circuit Overload And Overheating. Unlike A Normal Test Lamp, This Device Can Conduct Direct Battery Current Into The Circuit You Touch With It. Any Time You Backfeed A Circuit, You Need To Know What You Are Doing. The Breaker Will Protect The Circuit, But 8 Amps Is Still Enough To Do A Lot Of Damage With The Wrong Wire..
【What Can An Ancel Pb100 Do?】In Fact, This Is A Very Handy Tool For Many Functional Circuit Tests. For Example, You Can Use It To Turn On A Blower Motor. You Can Run Power Window Motors, Windshield Wipers, And Even Rear Window Defrosters. But Be Careful When Turning On Anything With A Motor, Especially Something With A Motor-Driven Linkage..
Features
- What is a PB100 Circuit Tester? With the PB100 circuit tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device.
- What can an ANCEL PB100 do? In fact, this is a very handy tool for many functional circuit tests. For example, you can use it to turn on a blower motor. You can run power window motors, windshield wipers, and even rear window defrosters. But be careful when turning on anything with a motor, especially something with a motor-driven linkage.
- Voltage indicator The LED indicator on the front of the unit will show you the battery voltage when it is connected. You can use it to determine a whole range of things. You can even do a quick check of the alternator by plugging it in and starting the car. The voltage should go from about 12.6 volts to 14.0 volts. This is also useful if you have a situation where a power supply has a large voltage drop, if you notice low voltage on certain branches when checking fuses, etc.
- Circuit Protection The PB100 has a built-in 8-amp circuit breaker to prevent circuit overload and overheating. Unlike a normal test lamp, this device can conduct direct battery current into the circuit you touch with it. Any time you backfeed a circuit, you need to know what you are doing. The breaker will protect the circuit, but 8 amps is still enough to do a lot of damage with the wrong wire.
- Trailer Wiring A recurring source of frustration for technicians across the country, especially those who service trailers exposed to road salt or salt water. The PB100 Circuit Tester features a long 20-foot cable that allows you to make the initial connection directly to the vehicle's battery, while providing easy access to connect the trailer harness at the rear of the vehicle.
- See more on Amazon...
Brand: ANCEL
See On Amazon #11
ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader ANCEL S160 Automotive Smoke Machine with Built-in Air Pump Professional Leak Detector EVAP Vacuum Diagnostic Tester
Asin: B0CMWRDLBR
Sturdy And Compact: Equipped With A 2.5 Foot Cable Made Of Very Thick, Flexible Insulation. It Is Important To Have A Sturdy Scanner As It Can Easily Fall To The Ground When Working In A Car. The Ad310 Obd2 Scanner Is A Well-Constructed Device With A Sleek Design. It Weighs 12 Ounces And Measures 8.9 X 6.9 X 1.4 Inches. Thanks To Its Compact Design And Light Weight, Transporting The Device Is Not A Problem. The Buttons Are Clearly Labelled And The Screen Is Large And Displays Results Clearly..
Built-In Air Pump; It Brings The Advantages Of Independent Gas Supply, No Need To Rely On External Air Source Equipment, Can Provide Fast And Stable Air Supply, Accurate Control, Wide Application Range And Good Compatibility. Compared With The Traditional Detector Which Needs Manual Gas Supply, It Can Save Operation Time And Improve Test Efficiency. Anytime, Anywhere, Users Can Easily Test. It Makes The Detector More Convenient And Practical, And Improves The Efficiency And Accuracy Of The Test..
Automotive Smoke Machine: When There Is A Leak In The Emission System Or Vacuum System Of A Car, It Will Lead To Poor Acceleration, Lack Of Power, Poor Fuel Economy, Non-Compliance Of Exhaust Gas Emission, Engine Shaking, Warning Light On, Etc. The S160 Automotive Smoke Leak Detector Can Help Car Owners And Maintenance Professionals To Quickly Detect And Locate The Leaks, In Order To Ensure The Normal Operation Of Cars, Reduce Pollution And Improve Fuel Economy And Performance At The Same Time..
Cel Doctor: The Ancel Ad310 Is One Of The Best-Selling Obd Ii Scanners On The Market And Is Recommended By Scotty Kilmer, A Youtuber And Auto Mechanic. It Can Easily Determine The Cause Of The Check Engine Light Coming On, Quickly Read And Clear Diagnostic Trouble Codes, Read Live Data & Hard Memory Data, View Freeze Frame, I/M Monitor Readiness And Collect Vehicle Information. Instead Of Taking Car To Mechanic Shop, You Can Use It To Check The Trouble Code And Show Code Definition By Yourself..
Features
- Included: 1x ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader,1xS160 Automotive Smoke Machine with Built-in Air Pump Professional Leak Detector EVAP Vacuum Diagnostic Tester
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on, quickly read and clear diagnostic trouble codes, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information. Instead of taking car to mechanic shop, you can use it to check the trouble code and show code definition by yourself.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed device with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Automotive Smoke Machine: When there is a leak in the emission system or vacuum system of a car, it will lead to poor acceleration, lack of power, poor fuel economy, non-compliance of exhaust gas emission, engine shaking, warning light on, etc. The S160 Automotive Smoke Leak Detector can help car owners and maintenance professionals to quickly detect and locate the leaks, in order to ensure the normal operation of cars, reduce pollution and improve fuel economy and performance at the same time.
- Built-in Air Pump; It brings the advantages of independent gas supply, no need to rely on external air source equipment, can provide fast and stable air supply, accurate control, wide application range and good compatibility. Compared with the traditional detector which needs manual gas supply, it can save operation time and improve test efficiency. Anytime, anywhere, users can easily test. It makes the detector more convenient and practical, and improves the efficiency and accuracy of the test.
- See more on Amazon...
Brand: ANCEL
See On Amazon #12
ANCEL BA301 Battery Tester with ANCEL AD410 Pro+ OBD2 Scanner
Asin: B0C1BR3H8T
【Display Overall Batteries Data】Except Give You The Basic Battery Parameters Such As Voltage, Impedance(Internal Resistance+Reactance), Cold Cranking Amp, Battery Health And Charge Status,Etc..
【Full Display Of Real-Time Vehicle Data】Compared To Other Cheap Code Readers,Our Code Readers & Scan Tools Can Display Real-Time Vehicle Sensor Data In Both Text And Graphical Formats,Allowing You To Visualize Them More Intuitively.
【The Full Obd2 Functionality Code Reader】Have You Been Can't Figure Out What's Wrong With Your Car? Are You Worried About Being Overcharged By A Repair Shop Without Knowing The Problem? Don't Worry!.
【One-Key Waveform Analysis】The One-Click "Waveform" Function Allows You To Plot The Voltage Changes (Current-Voltage, Maximum Voltage, And Minimum Voltage) During Ignition On A Graph With One Click..
Features
- The Best Accurate Battery Test BA301 battery load tester adops the state-of-the-art conductance testing technology and intelligent chips, testing result up to 99.99% accuracy, to easily,quickly and accurately measure the Actual cold start current performance, healthy state and aging degree of vehicle batteries, and common fault of the vehicle starting system and charging system
- One-key Waveform Analysis The one-click Waveform function allows you to plot the voltage changes (current-voltage, maximum voltage, and minimum voltage) during ignition on a graph with one click.
- Display Overall Batteries Data Except give you the basic battery parameters such as voltage, impedance(internal resistance+reactance), cold cranking amp, battery health and charge status,Etc.
- The Full OBD2 Functionality Code Reader Have you been can't figure out what's wrong with your car? Are you worried about being overcharged by a repair shop without knowing the problem? Don't worry!
- Full Display Of Real-Time Vehicle Data Compared to other cheap code readers,our code readers & scan tools can display real-time vehicle sensor data in both text and graphical formats,allowing you to visualize them more intuitively
- See more on Amazon...
Brand: ANCEL
See On Amazon #13
ANCEL AD310 Classic Enhanced Universal OBD II Scanner with ANCEL BA301 6V 12V Car Battery Tester, 100-2000 CCA Automotive Load Tester Alternator Tester
Asin: B0BRQ8WKPS
Obdii Protocols And Car Compatibility: Many Cheap Scan Tools Do Not Really Support All Obd2 Protocols. This Is Not The Case With The Ad310 Scanner As It Can Support All Obdii Protocols Such As Kwp2000, J1850 Vpw, Iso9141, J1850 Pwm And Can..
【Starter& Alternator Tester】Ba301 Battery Load Tester Is Not Only A Great Battery Load Tester That Tests Batteries Cranking & Charging System But Also Can Test Alternator's Charging And Starter's Cranking Conditions..
Display Overall Batteries Data】Except Give You The Basic Battery Parameters Such As Voltage, Impedance(Internal Resistance+Reactance), Cold Cranking Amp, Battery Health And Charge Status,Etc..
Accurate Fast And Easy To Use: The Ad310 Scanner Can Help You Or Your Mechanic Understand If Your Car Is In Good Condition, Provides Exceptionally Accurate And Fast Results, Reads And Clears Engine Trouble Codes In Seconds..
Features
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble codes in seconds.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. This is not the case with the AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN.
- Display Overall Batteries Data Except give you the basic battery parameters such as voltage, impedance(internal resistance+reactance), cold cranking amp, battery health and charge status,Etc.
- Starter& Alternator Tester BA301 battery load tester is not only a great battery load tester that tests batteries cranking & charging system but also can test alternator's charging and starter's cranking conditions.
- See more on Amazon...
Brand: ANCEL
See On Amazon #14
ANCEL AD610 Plus+ OBDII Scanner ABS SRS Airbag Light Reset Scan Tool with 23Pcs Block Cap Plugs Kit
Asin: B0CNV7R5P3
🥇 Abs Srs Bidirectional Tester: Few Low P-Riced Car Scanners Have Bidirectional Tests.This Abs Airbag Reset Scanner Supports Bidirectional Diagnostic Tests On Anti-Lock Braking Systems And Air Bags. It Can Activate And Control The Abs Srs System Or Component Like Auto Bleed Test/ Abs Manual Control Test/ Abs Motor Test/ Actuator Tests, Etc; Enables Easy Tasks To Check Electronic Components Such As Switches, Sensors, Solenoids, Battery, Pump Motor, Etc.
🔥23 Piece Set: Different Sizes Range From 0,39 Inch To 4.13 Inch Diameter, Meet Different Needs.Made From High-Quality Materials, It Is Durable And Not Easily Damaged. Bright Red Colour For Easy Marking Identification.
🥇 Professional Abs Bleeding Scanner：If You Are Experiencing Any Of The Following, It Is Time For Abs Brake Bleeding: Have You Feel That The Brake Pedal Become Spongy Or It Take Longer Than Usual To Stop Your Car? Have You Just Replaced The Brake Pump Or The Brake Oil Is Seriously Lack? With This Abs Diagnostic Tool, The Solenoid Valves In The Abs Pump Will Be Activated To Form A Complete And Smooth Oil Circuit, So As To Smoothly And Completely Bleed The Entire System.
🥇【4 Systems】+【Srs/Sas/Abs Reset】Unlike Basic Obd2 Scanners, Ancel Ad610 Plus Obd2 Scanner (Comes With A Storage Box) That Is Not Limited To Simple Engine Diagnosis, But Has More Powerful Features. Ancel Ad610 Plus+ Is A Professional Scan Tool For Systems Of Abs, Sas, Srs And Engine ✅ Bidirectional Tests On Anti-Lock Braking System And Airbags ✅ Abs Reset, Read And Repair Abs System, Bleed Test For Removing Air From The Internal Brake Fluid Chambers ✅Reset Steering Wheel Angle Sensor For Sas Sys.
Features
- Package Include: 1 X ANCEL ANCEL AD610 Plus+ SAS SRS OBD2 Scanner, troubleshooting faults for your car; 1* ANCEL Cap Plugs Set (23Pcs), a nice variety of plastic plugs that can be used to plug holes from automotive use to home use
- 4 Systems + SRS/SAS/ABS Reset unlike basic obd2 scanners, ANCEL ad610 plus obd2 scanner (comes with a storage box) that is not limited to simple engine diagnosis, but has more powerful features. ANCEL AD610 Plus+ is a professional scan tool for systems of ABS, SAS, SRS and Engine Bidirectional tests on anti-lock braking system and airbags ABS reset, read and repair ABS system, bleed test for removing air from the internal brake fluid chambers Reset steering wheel angle sensor for SAS sys
- ABS SRS Bidirectional Tester: Few low p-riced car scanners have bidirectional tests.This abs airbag reset scanner supports bidirectional diagnostic tests on anti-lock braking systems and air bags. It can activate and control the ABS SRS system or component like Auto Bleed Test/ ABS Manual Control Test/ ABS Motor Test/ Actuator Tests, etc; enables easy tasks to check electronic components such as switches, sensors, solenoids, battery, pump motor, etc
- Professional ABS Bleeding Scanner If you are experiencing any of the following, it is time for ABS brake bleeding: Have you feel that the brake pedal become spongy or it take longer than usual to stop your car? Have you just replaced the brake pump or the brake oil is seriously lack? With this abs diagnostic tool, the solenoid valves in the ABS pump will be activated to form a complete and smooth oil circuit, so as to smoothly and completely bleed the entire system
- 23 Piece set: Different sizes range from 0,39 inch to 4.13 inch diameter, meet different needs.Made from high-quality materials, it is durable and not easily damaged. Bright red colour for easy marking identification
- See more on Amazon...
Brand: ANCEL
See On Amazon #15
ANCEL PB100 Automotive Power Circuit Probe Tester,BM200 12V Car Battery Tester, Bluetooth 4.2 Automotive Battery Monitor Auto Battery Load Analyzer for Lithium & Lead-Acid Batteries with Charging Test
Asin: B0C9QW73B3
【What Is A Pb100 Probe Tester?】With The Pb100 Probe Tester, You Can Check Voltage And Ground Signals In A Typical Dc Circuit. However, The Kicker Is That You Can Also Use It To Send Voltage And Ground Signals. It Works Like A Test Light That Can Power Circuits Or Provide A Good Known Ground. This Way, You Can Effectively Test Components And Circuits Without Having To Break Out The Old Alligator Clips And Jumper Wires. You Can Power Or Ground A Circuit Directly Through The Top Of The Device..
🔥Includes: 1*Ancel Pb100 Automotive Power Circuit Probe Tester, 12V 24V Car Test Light Electrical Diagnostic Tool Master Kit Ac Dc Digital Voltage Short Finder, Relay Fuse Tester Trailer 3 System Thermometer 4, 1*Ancel Bm200 12V Car Battery Tester, Bluetooth 4.2 Automotive Battery Monitor Auto Battery Load Analyzer For Lithium & Lead-Acid Batteries With Cranking Charging Test Alarm Record Voltage History..
【What Does It Do?】The Pb100 Is An Essential Tool For Automobile User. It Is Needed For Testing Components On And Off The Vehicle, Checking For The Good And Bad Grounds, Testing For Continuity And Diagnosing Circuit Failures. For Example, You Can Use It To Turn On A Blower Motor. You Can Run Power Window Motors, Windshield Wipers, And Even Rear Window Defrosters. If The Vehicle Owner Keeps It In His Car He Can Check System Failure On His Own Way No Need To Go To Technician..
【1S Fast Diagnosis, 99.9% Accuracy】Bm200 Car Battery Tester Has An Average Power Consumption Of 1.5Ma, Which Is Extremely Low Loss To The Battery. Bluetooth 4.2 Wirelessly Connects To The Device, Enabling Faster And More Stable Data Transfer. Notably, It Can Also Display Basic Battery Parameters In Real Time, Including Power, Temperature And Voltage, Charging, Starting Power, Etc. You Can Know Everything About The Battery To Find And Solve Problems More Precisely. It Is A Must-Have Testing Tool..
Features
- 2023 Upgrade Car Battery Tester ANCEL BM200 Bluetooth battery monitor can test all 12V 100-2000CCA lead-acid and lithium batteries, it is the only device on the market that can test these 2 types of batteries. Most importantly, it supports not only cranking and charging system testing, but also alternator and starter testing. So that users can keep track of battery dynamics and provide a comprehensive analysis of battery health, it is one of the most cost-effective battery analyzers.
- 1s fast diagnosis, 99.9% accuracy BM200 car battery tester has an average power consumption of 1.5mA, which is extremely low loss to the battery. Bluetooth 4.2 wirelessly connects to the device, enabling faster and more stable data transfer. Notably, it can also display basic battery parameters in real time, including power, temperature and voltage, charging, starting power, etc. You can know everything about the battery to find and solve problems more precisely. It is a must-have testing tool.
- What is a PB100 Probe Tester? With the PB100 probe tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device.
- What does it do? The PB100 is an essential tool for automobile user. It is needed for testing components on and off the vehicle, checking for the good and bad grounds, testing for continuity and diagnosing circuit failures. For example, you can use it to turn on a blower motor. You can run power window motors, windshield wipers, and even rear window defrosters. If the vehicle owner keeps it in his car he can check system failure on his own way no need to go to technician.
- Includes: 1*ANCEL PB100 Automotive Power Circuit Probe Tester, 12V 24V Car Test Light Electrical Diagnostic Tool Master Kit AC DC Digital Voltage Short Finder, Relay Fuse Tester Trailer 3 System Thermometer 4, 1*ANCEL BM200 12V Car Battery Tester, Bluetooth 4.2 Automotive Battery Monitor Auto Battery Load Analyzer for Lithium & Lead-Acid Batteries with Cranking Charging Test Alarm Record Voltage History.
- See more on Amazon...
Brand: ANCEL
See On Amazon #16
ANCEL AD410 Pro+ 2 in 1 OBD2 Scanner Battery Tester, OBD2 Scanner Diagnostic Tool for Car Check Engine Code Reader Scan Tool ANCEL BM200 Pro Car Battery Tester Battery Monitor
Asin: B0C7G3HZXN
✅433Mhz Radio Frequency Transmission:Compared With Bluetooth, Bm 200 Pro Battery Monitor Adapt 433Mhz Rf Technology Has The Advantages Of Better Penetration Ability, Longer Signal Transmission Distance( Can Reach Several Hundred Meters), More Energy Saving And Less Signal Interference, Which Is Suitable For Data Transmission In Any Complex Environment. Such As Basement, Stairwell, Rural Areas And Any Other Places, Etc.You Do Not Need To Connect To The Network,Phone And Install The App..
🔥Includes:1*Ancel Ad410 Pro+ 2 In 1 Obd2 Scanner Battery Tester, Obd2 Scanner Diagnostic Tool For Car Check Engine Code Reader Scan Tool & 6V 12V 100-2000 Cca Battery Charging Cranking Test Evap Live Data,1*Ancel Bm200 Pro Car Battery Tester Battery Monitor 433Mhz Wireless Radio Frequency 12V Automotive Battery Load Tester With Charging & Cranking Test & Alarm Function For Car Truck Atv Suv Boat Etc..
✅Energy Saving And Environmental Protection:The Car Battery Tester Display Screen Adopts Two Modes Of Power Supply:Type-C Fast Charging And Solar Panel. The Solar Panel Powers And Charges The Device So That It Does Not Need To Be Charged As Often.The Use Of Solar Cells Are More Environmentally Friendly, Energy Efficient, And Can Work Independently Of The Grid.This Is Very Useful For Some Remote Areas Or Wilderness Adventure And Other Scenarios.High Economy Can Reduce Energy Costs..
✅12V Lead-Acid Battery Monitor: Ancel Bm200 Pro Is A 12V Lead-Acid Battery Tester, Which Consists Of A Wireless Host Unit And A Wireless Display. It Can Display The Voltage, Power, Temperatureand Health Of The Battery In Real Time, Andautomatically Test The Starting And Chargingsystems Of The Vehicle. When The Temperature Is Abnormal, Low Power, Low Voltage, Startup System Failure, Charging System Exceeds The Normal Range, The Wireless Display Will Automatically Emit Alarm Sound To Remind..
Features
- 2023 Upgraded 2 in 1 OBD2 Scanner Battery Tester,Most Comprehensive Vehicle Doctor Most OBD2 scanners on the market only have complete OBD2 functionality. The AD410 Pro+ OBD2 scanner is an upgraded version of the AD410,which is not only a basic vehicle code reader but also a professional 6V/12V battery tester.It can test lead-acid batteries with a CCA range of 100 to 2000,perform battery testing, charging testing,and starting testing. Making it an extremely cost-effective diagnostic tool.
- 12V LEAD-ACID BATTERY MONITOR: ANCEL BM200 Pro is a 12V lead-acid battery tester, which consists of a wireless host unit and a wireless display. It can display the voltage, power, temperatureand health of the battery in real time, andautomatically test the starting and chargingsystems of the vehicle. When the temperature is abnormal, low power, low voltage, startup system failure, charging system exceeds the normal range, the wireless display will automatically emit alarm sound to remind.
- 433MHZ RADIO FREQUENCY TRANSMISSION:Compared with Bluetooth, BM 200 Pro battery monitor adapt 433MHz RF technology has the advantages of better penetration ability, longer signal transmission distance( Can reach several hundred meters), more energy saving and less signal interference, which is suitable for data transmission in any complex environment. Such as basement, stairwell, rural areas and any other places, etc.You do not need to connect to the network,phone and install the app.
- ENERGY SAVING AND ENVIRONMENTAL PROTECTION:The car battery tester display screen adopts two modes of power supply:Type-C fast charging and solar panel. The solar panel powers and charges the device so that it does not need to be charged as often.The use of solar cells are more environmentally friendly, energy efficient, and can work independently of the grid.This is very useful for some remote areas or wilderness adventure and other scenarios.High economy can reduce energy costs.
- Includes:1*ANCEL AD410 Pro+ 2 in 1 OBD2 Scanner Battery Tester, OBD2 Scanner Diagnostic Tool for Car Check Engine Code Reader Scan Tool & 6V 12V 100-2000 CCA Battery Charging Cranking Test EVAP Live Data,1*ANCEL BM200 Pro Car Battery Tester Battery Monitor 433mhz Wireless Radio Frequency 12V Automotive Battery Load Tester with Charging & Cranking Test & Alarm Function for Car Truck ATV SUV Boat Etc.
- See more on Amazon...
Brand: ANCEL
See On Amazon #17
ANCEL AD410 PRO and S3000 Automotive Smoke Machine Diagnostic Tester
Asin: B0BYSTFL9D
👍Ad310/Ad410 Upgraded Obd2 Scanner Battery Tester: The Upgraded 2 In 1 Ancel Ad410 Pro Contains All The Basic Functions Of Ad410/Ad310 And Enhanced Obdii Diagnostic Functions, Also Adds A Powerful Battery Tester, Battery Health Test, Cranking And Charging Test, Making It A Cost-Effective Diagnostic Tool For Vehicle Diy Users And Automotive Technicians..
🚘[High Performance And High-Quality Metal Structure] Compared To Other Simple Smoke Leak Diagnostic Testers, The Ancel S3000 Smoke Machine Not Only Has A Built-In Air Pump, But Also Has A Pressure Gauge And An Adjustable Flow Meter. The Compressor Generates Air Pressure From 0.8 To 14.5 Psi, Allowing Smoke To Be Easily Introduced Into The Tested Sealing System, Speeding Up The Leak Detection Process..
🚘The Ancel S3000 Is A Professional Smoke Leak Detector Which Can Generate A Lot Of Smoke And Help You Troubleshoot, Diagnose And Repair The Evap System To Solve The Problem Of Engine Weakness And High Fuel Consumption Due To Leaks. It Not Only Supports Leak Detection In Evap System, But Also Can Be Used To Detect Exhaust/Condensation/Egr System, Vacuum System, Turbine System, Intake Manifold, Vacuum Line, Etc..
👍Upgraded Ad310/Ad410 Obd2 Scanner Battery Tester, 2 In 1 Ancel Ad410 Pro Check Engine Code Reader & 6V 12V Battery Cranking Charging Test With All Obdii Function Car Diagnostic Scan Tool.
Features
- Includes: 1X ANCEL AD410 PRO OBD2 Scanner Battery Tester, 1X ANCEL S3000 EVAP Automotive Smoke Machine Diagnostic Tester
- Upgraded AD310/AD410 OBD2 Scanner Battery Tester, 2 in 1 ANCEL AD410 PRO Check Engine Code Reader & 6V 12V Battery Cranking Charging Test with All OBDII Function Car Diagnostic Scan Tool
- AD310/AD410 UPGRADED OBD2 SCANNER BATTERY TESTER: The upgraded 2 in 1 ANCEL AD410 PRO contains all the basic functions of AD410/AD310 and enhanced OBDII diagnostic functions, Also adds a powerful battery tester, battery health test, cranking and charging test, making it a cost-effective diagnostic tool for vehicle DIY users and automotive technicians.
- The ANCEL S3000 is a professional smoke leak detector which can generate a lot of smoke and help you troubleshoot, diagnose and repair the EVAP system to solve the problem of engine weakness and high fuel consumption due to leaks. It not only supports leak detection in EVAP system, but also can be used to detect exhaust/condensation/EGR system, vacuum system, turbine system, intake manifold, vacuum line, etc.
- [High performance and high-quality metal structure] Compared to other simple smoke leak diagnostic testers, the ANCEL S3000 smoke machine not only has a built-in air pump, but also has a pressure gauge and an adjustable flow meter. The compressor generates air pressure from 0.8 to 14.5 psi, allowing smoke to be easily introduced into the tested sealing system, speeding up the leak detection process.
- See more on Amazon...
Brand: ANCEL
See On Amazon #18
ANCEL HD601 PRO Heavy Duty Truck Code Reader Enhanced All System Diesel Scan Tool with ANCEL PB100 Automotive Power Circuit Probe Tester
Asin: B0B9BVD42Z
【Oe-Level Full System Diagnostic】Hd601 Pro Diesel Scanner Supports All System Scans Of Heavy Trucks Compliant With Standard Protocols Sae J1939 & J1708, Such As Engine, Abs, Transmission, Braking System, Esp, Eps, Fuel System, Etc, It Is A Great Scan Tool For Cummins, Caterpillar, Detroit, Perkins, Maxxforce, Bendixwabash, Wabaco, Haldex, Allison, Eaton Heavy Trucks, With This Truck Tool, You Can Get Deep Analysis Data About The System And Do Some Repairs By Yourself, Saving Much Time And Money..
【What Can An Ancel Pb100 Do?】In Fact, This Is A Very Handy Tool For Many Functional Circuit Tests. For Example, You Can Use It To Turn On A Blower Motor. You Can Run Power Window Motors, Windshield Wipers, And Even Rear Window Defrosters. But Be Careful When Turning On Anything With A Motor, Especially Something With A Motor-Driven Linkage..
【Enhanced Diesel Obd Scanner】As A 2-In-1 Code Reader, It Supports The Latest Iso27145 And Euro6 Protocols And Enables Diagnosis Of Car And Truck Engines. In Addition To Reading Codes, Clearing Codes And Displaying Live Data In A Text Or Graphic Format For Trucks, You Can Also Retrieve Vehicle Information, View Freeze Frames And Look Up Dtcs. To Ensure That This Device Works With Different Engines, It Is Also Equipped With 6, 9 And 16 Pin Cables That Allow You To Easily Turn Off The Cel Light..
【Extensive Compatibility】After The Upgrade, The Compatibility Is Wider And More Accurate! Hd601 Pro Heavy Duty Truck Scanner Supports All Major Truck Models That Comply With Standard Protocols (Sae J1939, Sae J1708, Iso 14230-4, Iso 15764-4 And Iso 9141-2, Iso 27145-4 And Euro6). Such As Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford, Class 4-Class 8 Trucks, Etc. It Also Check Engine Diagnosis On Most Cars, Minivans And Light Trucks From 1996 And Latest..
Features
- Includes: 1 x HD601 PRO Truck Code Reader, 1x PB100 Circuit Tester
- Extensive Compatibility After the upgrade, the compatibility is wider and more accurate! HD601 PRO heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Such as Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks from 1996 and latest.
- OE-Level Full System Diagnostic HD601 PRO Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins, Caterpillar, Detroit, Perkins, Maxxforce, BendixWabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money.
- Enhanced Diesel OBD Scanner As a 2-in-1 code reader, it supports the latest ISO27145 and Euro6 protocols and enables diagnosis of car and truck engines. In addition to reading codes, clearing codes and displaying live data in a text or graphic format for trucks, you can also retrieve vehicle information, view freeze frames and look up DTCs. To ensure that this device works with different engines, it is also equipped with 6, 9 and 16 pin cables that allow you to easily turn off the CEL light.
- What can an ANCEL PB100 do? In fact, this is a very handy tool for many functional circuit tests. For example, you can use it to turn on a blower motor. You can run power window motors, windshield wipers, and even rear window defrosters. But be careful when turning on anything with a motor, especially something with a motor-driven linkage.
- See more on Amazon...
Brand: ANCEL
See On Amazon #19
ANCEL PB100 with Case Automotive Power Circuit Probe Tester, 12V 24V Car Electrical System Test Tool Kit AC DC Digital Voltage Resistance Short Finder, Relay Fuse Tester, Trailer Light Diagnostic
Asin: B0B3QW5YQ3
【Voltage Indicator】The Led Indicator On The Front Of The Unit Will Show You The Battery Voltage When It Is Connected. You Can Use It To Determine A Whole Range Of Things. You Can Even Do A Quick Check Of The Alternator By Plugging It In And Starting The Car. The Voltage Should Go From About 12.6 Volts To 14.0 Volts. This Is Also Useful If You Have A Situation Where A Power Supply Has A Large Voltage Drop, If You Notice Low Voltage On Certain Branches When Checking Fuses, Etc..
【Trailer Wiring】A Recurring Source Of Frustration For Technicians Across The Country, Especially Those Who Service Trailers Exposed To Road Salt Or Salt Water. The Pb100 Circuit Tester Features A Long 20-Foot Cable That Allows You To Make The Initial Connection Directly To The Vehicle's Battery, While Providing Easy Access To Connect The Trailer Harness At The Rear Of The Vehicle..
【Circuit Protection】The Pb100 Has A Built-In 8-Amp Circuit Breaker To Prevent Circuit Overload And Overheating. Unlike A Normal Test Lamp, This Device Can Conduct Direct Battery Current Into The Circuit You Touch With It. Any Time You Backfeed A Circuit, You Need To Know What You Are Doing. The Breaker Will Protect The Circuit, But 8 Amps Is Still Enough To Do A Lot Of Damage With The Wrong Wire..
【What Can An Ancel Pb100 Do?】In Fact, This Is A Very Handy Tool For Many Functional Circuit Tests. For Example, You Can Use It To Turn On A Blower Motor. You Can Run Power Window Motors, Windshield Wipers, And Even Rear Window Defrosters. But Be Careful When Turning On Anything With A Motor, Especially Something With A Motor-Driven Linkage..
Features
- What is a PB100 Probe Tester? With the PB100 probe tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device.
- What Can an ANCEL PB100 Do? In fact, this is a very handy tool for many functional circuit tests. For example, you can use it to turn on a blower motor. You can run power window motors, windshield wipers, and even rear window defrosters. But be careful when turning on anything with a motor, especially something with a motor-driven linkage.
- Voltage Indicator The LED indicator on the front of the unit will show you the battery voltage when it is connected. You can use it to determine a whole range of things. You can even do a quick check of the alternator by plugging it in and starting the car. The voltage should go from about 12.6 volts to 14.0 volts. This is also useful if you have a situation where a power supply has a large voltage drop, if you notice low voltage on certain branches when checking fuses, etc.
- Circuit Protection The PB100 has a built-in 8-amp circuit breaker to prevent circuit overload and overheating. Unlike a normal test lamp, this device can conduct direct battery current into the circuit you touch with it. Any time you backfeed a circuit, you need to know what you are doing. The breaker will protect the circuit, but 8 amps is still enough to do a lot of damage with the wrong wire.
- Trailer Wiring A recurring source of frustration for technicians across the country, especially those who service trailers exposed to road salt or salt water. The PB100 Circuit Tester features a long 20-foot cable that allows you to make the initial connection directly to the vehicle's battery, while providing easy access to connect the trailer harness at the rear of the vehicle.
- See more on Amazon...
Brand: ANCEL
See On Amazon
Looking For Something Else?
Search