60mm Reinforced 30% Glass Fibre Washers for Fixing Rigid Insulation Boards, Brown - 200PCS
Asin: B07B269LXC | Ean: 7437505189139, 5060857920505
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Suitable For Screw Size: #12 Or #10 (3/16" Or 5Mm Diameter).
All Of Our Products Are Designed And Manufactured By Ourselves In The Uk, Using The Very Latest Production Technology To Ensure That Every Single Part We Produce Meets Our Design Brief And Your Requirements..
Heat Resistance (Max Continuous Temperature 110C, Max Use Temperature, Short Peaks 140C). Flame Rating (3Mm) Hb - Test Method Ul94. Chemical Inertness..
Low Profile Only 4.2Mm When Fixed (5.2Mm Total Depth). Textured Surface Finish Helps With The Adhesion Of Lime Plaster And Other Finishes..
Features
- 200 - Extra strong load spreading 60mm washers designed for fixing and supporting rigid wood/wool insulation boards like Savolit, Pavatex, Celenit and Heraklith, permanently in place. Made from a high density reinforced plastic with a 30% fibreglass fill to increase both strength and rigidity. Proudly designed and manufactured by ourselves in the UK - Color Brown
- Low profile only 4.2mm when fixed (5.2mm total depth). Textured surface finish helps with the adhesion of Lime Plaster and other finishes.
- Suitable for screw size: #12 or #10 (3/16 or 5mm diameter)
- Heat resistance (Max continuous temperature 110C, Max use temperature, short peaks 140C). Flame Rating (3mm) HB - Test method UL94. Chemical inertness.
- All of our products are designed and manufactured by ourselves in the UK, using the very latest production technology to ensure that every single part we produce meets our design brief and your requirements.
- See more on Amazon...
Brand: hawkeng | Manufacturer: Hawksworth Engineering
Dimensions: 5.91 x 8.66 x 5.91 inches | Weight: 0.01 Pounds
See On Amazon Similar To 60mm Reinforced 30 Glass Fibre
#1
Noctua NF-A6x25 PWM, Premium Quiet Fan, 4-Pin (60mm, Brown)
Asin: B00VXTANZ4 | Model: NF-A6x25 PWM | PartNumber: NF-A6x25 PWM | Ean: 0842431012524, 4716123315636, 6924043859248 | UPC: 842431012524
Ideal Replacement For Noisy Or Broken 12V 6Cm Fans In Dvrs, Nas, Network And Storage Devices, 3D Printers, Etc..
Includes Anti-Vibration Mounts, Fan Screws, Low-Noise Adaptor, Extension Cable And Y-Cable For Running Two Pwm Fans On The Same Header.
4-Pin Pwm Version For Automatic Speed Control Via 4-Pin Pwm Fan Headers, Broad 550-3000Rpm Speed Range (2300Rpm Max. With Supplied Low-Noise Adaptor).
Award-Winning 60X25mm A-Series Fan With Flow Acceleration Channels And Advanced Acoustic Optimisation Frame For Superior Quiet Cooling Performance.
Features
- Premium quiet fan, 60x60x25 mm, 12V, 4-pin PWM, max. 3000 RPM, max. 19.3 dB(A), >150,000 h MTTF
- Award-winning 60x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- Ideal replacement for noisy or broken 12V 6cm fans in DVRs, NAS, network and storage devices, 3D printers, etc.
- 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 550-3000rpm speed range (2300rpm max. with supplied Low-Noise Adaptor)
- Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header
- See more on Amazon...
Brand: Noctua | Manufacturer: Noctua
Dimensions: 6.00 x 8.50 x 1.50 inches | Weight: 0.09 Pounds
Warranty: 6 year manufacturer’s warranty
See On Amazon #2
Noctua NF-A6x25 FLX, Premium Quiet Fan, 3-Pin (60mm, Brown)
Asin: B009NQMESS | Model: NF-A6x25 | PartNumber: NF-A6x25
Ean: 0102930672910, 0809385174876, 0782386476630, 0163121136796, 5580007438105, 0804066782012, 0132017920733, 0168141421693, 7133363437275, 0172302657913, 0806291857183, 0808111662885, 0809185325683, 7445803090279, 0842431014061, 0731215274114, 4139052252757
UPC: 731215274114, 172302657913, 806291857183, 163121136796, 808111662885, 102930672910, 782386476630, 842431014061, 809185325683, 132017920733, 168141421693, 804066782012, 809385174876
Ideal Replacement For Noisy Or Broken 12V 6Cm Fans In Dvrs, Nas, Network And Storage Devices, 3D Printers, Etc..
Includes Anti-Vibration Mounts, Fan Screws, Low-Noise & Ultra-Low-Noise Adaptors, Extension Cable And 3:4-Pin Adaptor For Powering The Fan Directly From The Power Supply.
3-Pin Flx Version Provides 3000/2400/1600Rpm Speed Settings Via Low-Noise Adaptors To Fine-Tune The Fan For Maximum Airflow Or Near-Silent Operation.
Award-Winning 60X25mm A-Series Fan With Flow Acceleration Channels And Advanced Acoustic Optimisation Frame For Superior Quiet Cooling Performance.
Features
- Premium quiet fan, 60x60x25 mm, 12V, 3-pin Molex, 3000/2400/1600 RPM, max. 19.3 dB(A), >150,000 h MTTF
- Award-winning 60x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- Ideal replacement for noisy or broken 12V 6cm fans in DVRs, NAS, network and storage devices, 3D printers, etc.
- 3-pin FLX version provides 3000/2400/1600rpm speed settings via Low-Noise Adaptors to fine-tune the fan for maximum airflow or near-silent operation
- Includes anti-vibration mounts, fan screws, Low-Noise & Ultra-Low-Noise Adaptors, extension cable and 3:4-pin adaptor for powering the fan directly from the power supply
- See more on Amazon...
Brand: Noctua | Manufacturer: Noctua
Dimensions: 6.00 x 8.50 x 1.50 inches | Weight: 0.43 pounds
Warranty: 6 year manufacturer’s warranty
See On Amazon #3
Polymaker PA6-GF Nylon Filament 1.75mm Grey, 500g Glass Fiber Nylon Filament 1.75, Cardboard Spool - PolyMide PA6-GF Warp Free Nylon 3D Printer Filament
Asin: B09MTC2QRT | Model: PG02001 | PartNumber: PG02001 | Ean: 6938936711575
🧵 【Tangle Free & Resealable Bag】 - Our Glass Fiber Filled Nylon Filament 1.75 Is Carefully Winded To Avoid Any Tangling Issues, Dried And Vacuum Sealed In A Resealable Ziplock Bag With Desiccant. Please Make Sure To Never Let Go The Tip Of The Filament As It May Create Nodes. Holes On The Side Of The Spool Can Be Used To Prevent This Issue.
⚠️ 【Note】It Is Important To Have An Abrasion Resistant Nozzle Since There Is 25% Glass Fiber Inside This Nylon Filament. Polymide Pa6-Gf Is A Very Stiff Filament So It Is Required To Have A Good Set Up To Ensure A Good Feeding (Avoiding Excessive Bending In The Filament Guide System). It's Ultra Critical To Have Your Filament Enclosed In A Dessicant Box While Printing, And Keep Your Nozzles Clean Between Every 8 Prints Or So.
🛡️ 【Risk Free & Lifetime Technical Support】 - We Offer A Full Refund If The Product Is Not Performing As Expected. Let Us Help You Get Your Perfect Beautiful Prints And Contact Us Via Amazon Anytime You Need.
⚙️ 【Printing Setting】 - Nozzle: 280-300 ˚C; Bed Temperature: 25-50 ˚C (Do Not Exceed 50 ˚C); Speed: 30Mm/S – 60Mm/S; Annealing: 80℃ 6H (To Ensure A Good Heat Resistance Of Your Printed Part It Is Recommended To Anneal Your Print Model); Bed Surface: Almost Any Surface With A Thin Coat Of Pva Glue Or Magigoo Pa.
👉 【Wide Application】 - Polymide Pa6-Gf Is Very Strong, Durable And Features An Excellent Heat Resistance. It Can Be Used In Applications Requiring Torsional, Tensile, And Impact Strength Such As Bicycle Pedals, Brackets, Jigs, Drone Frame, Prosthetics Or Handles.
Features
- Stiff & Strong & Heat Resistant Nylon Filament - Polymaker PolyMide PA6-GF nylon filament 1.75mm is glass fiber reinforced Nylon 6 filament exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion
- Wide Application - PolyMide PA6-GF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, drone frame, prosthetics or handles
- Tangle Free & Resealable Bag - Our glass fiber filled nylon filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
- Printing Setting - Nozzle: 280-300 C; Bed Temperature: 25-50 C (Do NOT exceed 50 C); Speed: 30mm/s 60mm/s; Annealing: 80 6h (To ensure a good heat resistance of your printed part it is recommended to anneal your print model); Bed Surface: almost any surface with a thin coat of PVA glue or Magigoo PA
- Note It is important to have an abrasion resistant nozzle since there is 25% glass fiber inside this Nylon filament. PolyMide PA6-GF is a very stiff filament so it is required to have a good set up to ensure a good feeding (avoiding excessive bending in the filament guide system). It's ultra critical to have your filament enclosed in a dessicant box while printing, and keep your nozzles clean between every 8 prints or so
- RISK FREE & LIFETIME TECHNICAL SUPPORT - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Dimensions: 2.64 x 7.87 x 7.87 inches | Weight: 1.10 pounds
See On Amazon #4
IEMAI Carbon Fiber PETG Filament 1.75mm, Wear-Resistant & Heat-Resistant PETG-CF 3D Printer Filament, Carbon Fiber Filament 1kg(2.2lbs) Spool
Asin: B09XPXD1XD | Model: PN-25 | PartNumber: PN-25
【Excellent Interlayer Adhesion】Carbon Fiber Petg Filament 1.75Mm Has The Characteristics Of High Purity, Low Shrinkage, High Fluidity, And Rapid Cooling With No Problem Of Layer Separation. The Interlayer Adhesion And Bed Adhesion Are Excellent, Ensuring Stable Printing And High-Quality Printing Results Under Any Circumstances..
【Recommended Printing Settings】Recommended Printing Temperature: 230-250℃, Hot Bed Temperature: 60-80℃, Printing Speed: 30-100Mm/S. Friendly Reminder: It Is Recommended To Use Stainless Steel Nozzles Above 0.6Mm..
【Vacuum Sealed Packaging】100% Machine-Wound And Subject To Strict Manual Quality Inspection To Ensure That The 3D Printer Filament Is Neat, Tangle-Free, And Not Broken. Vacuum-Sealed Packaging With Desiccant Ensures That The 3D Filament Is Dust-Free And Moisture-Free, And There Is No Stringing, No Clogging, No Bubbles, And No Odor During The Printing Process..
【Excellent Mechanical Properties】Iemai Petg-Cf 3D Printer Filament Has Excellent Chemical Resistance, Heat Resistance, And Water Resistance. Its Heat Distortion Temperature Can Reach 150℃ (Tg: 150℃). Even After Long-Term Exposure In The Wild Or At High Temperatures Of 150°C, Its Structure Can Remain Intact And Stable. Widely Used In Industrial Manufacturing, Sports Equipment, Home Decoration, Precision Instruments, Etc..
Features
- Reinforced Carbon Fiber PETG IEMAI carbon fiber filament uses reinforced composite materials, 20% carbon fiber + 80% Polyethylene Terephthalate Glycol, which greatly enhances the strength, hardness, rigidity, toughness, impact resistance, and wear resistance of carbon fiber PETG filament.
- Excellent Mechanical Properties IEMAI PETG-CF 3D printer filament has excellent chemical resistance, heat resistance, and water resistance. Its heat distortion temperature can reach 150 (TG: 150 ). Even after long-term exposure in the wild or at high temperatures of 150 C, its structure can remain intact and stable. Widely used in industrial manufacturing, sports equipment, home decoration, precision instruments, etc.
- Excellent Interlayer Adhesion Carbon fiber PETG filament 1.75mm has the characteristics of high purity, low shrinkage, high fluidity, and rapid cooling with no problem of layer separation. The interlayer adhesion and bed adhesion are excellent, ensuring stable printing and high-quality printing results under any circumstances.
- Vacuum Sealed Packaging 100% machine-wound and subject to strict manual quality inspection to ensure that the 3D printer filament is neat, tangle-free, and not broken. Vacuum-sealed packaging with desiccant ensures that the 3D filament is dust-free and moisture-free, and there is no stringing, no clogging, no bubbles, and no odor during the printing process.
- Recommended Printing Settings Recommended printing temperature: 230-250 , hot bed temperature: 60-80 , printing speed: 30-100mm/s. Friendly reminder: It is recommended to use stainless steel nozzles above 0.6mm.
- See more on Amazon...
Brand: IEMAI | Manufacturer: IEMAI
Dimensions: 2.36 x 7.87 x 7.87 inches | Weight: 2.65 Pounds
See On Amazon #5
Noctua NF-A6x25 5V PWM, Premium Quiet Fan, 4-Pin, 5V Version (60mm, Brown)
Asin: B01K4HVBBU | Model: NF-A6x25 5V PWM | PartNumber: NF-A6x25 5V PWM | Ean: 0841501110047 | UPC: 841501110047
5V 4-Pin Pwm Version (3000Rpm Maximum Speed) With Polarity Protection For 5V Applications With Pwm Speed Control.
Includes Anti-Vibration Mounts, Fan Screws, Extension Cable, Y-Cable And Omnijoin Adaptor Set For Connection To Proprietary Fan Headers.
Ideal Replacement For Noisy Or Broken 5V 6Cm Fans In 3D Printers, Dvrs, Nas, Switches, Routers, Other Network And Storage Devices, Etc..
Award-Winning 60X25mm A-Series Fan With Flow Acceleration Channels And Advanced Acoustic Optimisation Frame For Superior Quiet Cooling Performance.
Features
- Premium quiet fan, 60x60x25 mm, 5V, 4-pin PWM, max. 3000 RPM, max. 19.3 dB(A), >150,000 h MTTF
- Award-winning 60x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- 5V 4-pin PWM version (3000rpm maximum speed) with polarity protection for 5V applications with PWM speed control
- Ideal replacement for noisy or broken 5V 6cm fans in 3D printers, DVRs, NAS, switches, routers, other network and storage devices, etc.
- Includes anti-vibration mounts, fan screws, extension cable, y-cable and OmniJoin adaptor set for connection to proprietary fan headers
- See more on Amazon...
Brand: Noctua | Manufacturer: Noctua
Dimensions: 0.98 x 2.36 x 2.36 inches | Weight: 0.42 pounds
Warranty: 6 year manufacturer’s warranty
See On Amazon #6
Noctua NF-A6x25 5V, Premium Quiet Fan, 3-Pin, 5V Version (60mm, Brown)
Asin: B01K4HRLRI | Model: Noctua NF-A6x25 5V | PartNumber: Noctua NF-A6x25 5V | Ean: 7753682806400, 0841501110030 | UPC: 841501110030
3-Pin 5V Version (3000 Rpm) With Polarity Protection For 5V Industrial Applications..
Includes Anti-Vibration Mounts, Fan Screws, Extension Cable And Omnijoin Adaptor Set For Connection To Proprietary Fan Headers.
Ideal Replacement For Noisy Or Broken 5V 6Cm Fans In Dvrs, Nas, Network And Storage Devices, 3D Printers, Etc..
Award-Winning 60X25mm A-Series Fan With Flow Acceleration Channels And Advanced Acoustic Optimisation Frame For Superior Quiet Cooling Performance.
Features
- Premium quiet fan, 60x60x25 mm, 5V, 3-pin Molex, 3000 RPM, 19.3 dB(A), >150,000 h MTTF
- Award-winning 60x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- 3-Pin 5V version (3000 RPM) with polarity protection for 5V industrial applications.
- Ideal replacement for noisy or broken 5V 6cm fans in DVRs, NAS, network and storage devices, 3D printers, etc.
- Includes anti-vibration mounts, fan screws, extension cable and OmniJoin adaptor set for connection to proprietary fan headers
- See more on Amazon...
Brand: Noctua | Manufacturer: Noctua
Dimensions: 0.98 x 2.36 x 2.36 inches | Weight: 0.13 pounds
Warranty: 6 year manufacturer’s warranty
See On Amazon #7
Gloaso 600A Copper Bus Bar 3/8" Power Distribution Blocks 12V - 48V DC Heavy Duty Module 4 Posts Terminals Block Automotive, Marine, RV, Solar Positive & Ground Battery Busbar with Cover, Red& Black
Asin: B0CFX3FTZH | Model: BB3671-600-RD | PartNumber: BB3671-600-RD
3, Ideal For Multiple Batteries Wiring Configurations: Our Bus Bar Terminal Block With 4X 3/8" Bolts Terminals, More Connection Points For The Red Positive Pole And The Black Negative, Removable Sides For Easy Wiring Configuration. The 4-Way Bus Wiring Block Will Make Setting Up Your Electrical Systems Quick, Neat And Easy.
7, Easy Installation: Surface Mount, Screws Included.
5, Gauge Cable Fit: The Bus Bar Is Rated For 600 Amps And The Threaded Stud Is 3/8"( M10). Any Gauge Wire Will Work As Long As The Terminal End Has A 3/8" Lug And The Combined Amp Draw Of All Connected Wires Do Not Exceed 600Amps..
6, Safe Note: A, The Wire And Over Current Protection Is Sized Based On The Load B, Make Sure The Lug Can Work With 600A Current.
4, Safely Fit For Vehicle, Solar And Marine Applications: The Terminal Busbar Is Suitable For 12V- 48V Dc Power Systems Such As Solar Panel, Rv, Car, Truck, Yacht, Boat Etc. To Consolidate, Distribute Or Protect Your Electrical System.
2, The Rated Current Of The 4-Post Power Distribution Block Bus Bar Is 600 A. The Max. Voltage Is 48 V Dc.
Features
- 1, Premium Materials & Security: Nickel -plated Copper distribution block bus for max conductivity and security. High-current collecting rail is Nylon, Glass Fiber reinforced and PC base, which ensures great mechanical strength and durability. Stainless steel screws and nuts for improved corrosion and rust resistance in salt water or corrosive environments
- 2, The rated current of the 4-post power distribution block bus bar is 600 A. The max. voltage is 48 V DC
- 3, Ideal for Multiple Batteries Wiring Configurations: Our bus bar terminal block with 4x 3/8 bolts Terminals, more connection points for the red positive pole and the black negative, removable sides for easy wiring configuration. The 4-way bus wiring block will make setting up your electrical systems quick, neat and easy
- 4, Safely Fit for Vehicle, Solar and Marine Applications: The Terminal busbar is suitable for 12v- 48v dc power systems such as solar panel, RV, car, truck, yacht, boat etc. to consolidate, distribute or protect your electrical system
- 5, Gauge Cable Fit: The bus bar is rated for 600 amps and the threaded stud is 3/8( M10). Any gauge wire will work as long as the terminal end has a 3/8 Lug and the combined amp draw of all connected wires do not exceed 600amps.
- 6, Safe Note: a, the wire and over current protection is sized based on the load b, Make sure the Lug can work with 600A current
- 7, Easy Installation: surface mount, screws included
- See more on Amazon...
Brand: Gloaso | Manufacturer: Gloaso
Dimensions: 2.36 x 4.02 x 4.02 inches | Weight: 0.97 Pounds
Warranty: follow Amazon Warranty Guaranttee Policy
See On Amazon #8
uxcell Drywall Tape, 1Pcs 2.4" x 98ft - Fiberglass Drywall Repair Tape, Self-Adhesive Mesh Fiber Tape, Drywall Joint Tape for Wall Crack Repair Seam Patch
Asin: B0CSNG13TF | Model: a23122300ux0835 | PartNumber: a23122300ux0835
[Self-Adhesive] - Our Drywall Tape Can Be Pasted On The Wall Without Pre-Coating Any Bonding Agent, Allowing For Easy And Convenient Application And Applying The Tape To The Desired Surface. The Self-Adhesive Property Eliminates The Need For Additional Adhesives, Saving You Time And Effort During Installation..
[Scope Of Application] - Our Drywall Tape Is Widely Used In Gypsum Board Joints, Wall Crack Repair, Waterproofing And Anti-Corrosion, Board Reinforcement, Etc. Experience The Versatility And Reliability Of Our Fiberglass Drywall Tape, For Achieving A Professional-Looking Finish On Your Drywall Surfaces..
[Easy To Install] - Applying Our Drywall Tape Is A Breeze, Even For Beginners. The Self-Adhesive Design Ensures Hassle-Free Installation. Cut The Required Amount Of Material Paste It On The Anti Crack Surface, And Then Cover It Evenly With A Covering. Whether You Are Repairing Cracks, Reinforcing Seams, Or Patching Holes, Our Tape Provides A Simple And Effective Solution..
[Good Material] - Crafted From Good Fiberglass, Our Drywall Tape Offers Exceptional Strength And Resilience. The Fiberglass Material Provides High Tensile Strength, Deformation Resistance, Alkali Resistance, And Waterproofing, Making It Suitable For Reinforcing Joints. Its Sturdy Construction Ensures Long-Lasting Performance For Your Drywall Projects..
Features
- [Basic Size] - Introducing our Drywall Tape, designed to provide reliable reinforcement and seamless finishing for your drywall projects. With overall dimensions of 60 mm wide and 30 meters long, with a mesh hole diameter of 2.4mm.
- [Good Material] - Crafted from good fiberglass, our Drywall Tape offers exceptional strength and resilience. The fiberglass material provides high tensile strength, deformation resistance, alkali resistance, and waterproofing, making it suitable for reinforcing joints. Its sturdy construction ensures long-lasting performance for your drywall projects.
- [Self-Adhesive] - Our Drywall Tape can be pasted on the wall without pre-coating any bonding agent, allowing for easy and convenient application and applying the tape to the desired surface. The self-adhesive property eliminates the need for additional adhesives, saving you time and effort during installation.
- [Easy to Install] - Applying our Drywall Tape is a breeze, even for beginners. The self-adhesive design ensures hassle-free installation. Cut the required amount of material paste it on the anti crack surface, and then cover it evenly with a covering. Whether you are repairing cracks, reinforcing seams, or patching holes, our tape provides a simple and effective solution.
- [Scope of Application] - Our Drywall Tape is widely used in gypsum board joints, wall crack repair, waterproofing and anti-corrosion, board reinforcement, etc. Experience the versatility and reliability of our fiberglass drywall tape, for achieving a professional-looking finish on your drywall surfaces.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
Dulles Glass 30" x 60" Rectangle Glass Table Top - Tempered - 1/4" Thick - Bevel Polished Glass - Radius Corners
Asin: B073HKWJDB | Model: T30x60RE6MMBETEM-R | PartNumber: T30x60RE6MMBETEM-R | Ean: 0811887023026 | UPC: 811887023026
1/4 Inch Thick Glass - Is A Great Option For Using As A Wooden Or Metal Furniture Topper. It's Lightweight And Can Protect Expensive Wood Surfaces From Scuffs, Scratches And Watermarks. It Also Works Well As An Inset Glass For Side Tables. Suitable Primarily For Table Covers And Table Protectors..
Superior Quality - We Are A Premium Usa Glass Manufacturer.
Radius Edge- A Radius Edge Table Top Has Rounded Corners Free From Sharp Edges..
Bevel Polished Edge- The Outer Inch Of The Table Top Has Been Cut Down At An Angle For Thinner Edges To Create An Elegant And Modern Look. The 1 Inch Bevel Around The Edges Makes For A Simple And Beautiful Focal Point On Your Table Top..
Features
- PREMIUM TEMPERED GLASS - Our tempered glass is extra tough safety glass that is designed to be shatter resistant and durable. Tempered glass is resistant to temperature changes and general wear and tear.
- BEVEL POLISHED EDGE- The outer inch of the table top has been cut down at an angle for thinner edges to create an elegant and modern look. The 1 inch bevel around the edges makes for a simple and beautiful focal point on your table top.
- 1/4 INCH THICK GLASS - Is a great option for using as a wooden or metal furniture topper. It's lightweight and can protect expensive wood surfaces from scuffs, scratches and watermarks. It also works well as an inset glass for side tables. Suitable primarily for table covers and table protectors.
- RADIUS EDGE- A radius edge table top has rounded corners free from sharp edges.
- SUPERIOR QUALITY - We are a Premium USA Glass Manufacturer
- See more on Amazon...
Brand: Dulles Glass | Manufacturer: TroySys
Dimensions: 0.25 x 30.00 x 60.00 inches | Weight: 41.00 pounds
See On Amazon #10
60mm Reinforced 30% Glass Fibre Washers for Fixing Rigid Insulation Boards, Mid Grey - 100PCS
Asin: B099H7MRJS | Model: INS60RE-GRY-100-US | PartNumber: INS60RE-GRY-100-US | Ean: 5060857920574
Suitable For Screw Size: #12 Or #10 (3/16" Or 5Mm Diameter).
All Of Our Products Are Designed And Manufactured By Ourselves In The Uk, Using The Very Latest Production Technology To Ensure That Every Single Part We Produce Meets Our Design Brief And Your Requirements..
Heat Resistance (Max Continuous Temperature 110C, Max Use Temperature, Short Peaks 140C). Flame Rating (3Mm) Hb - Test Method Ul94. Chemical Inertness..
Low Profile Only 4.2Mm When Fixed (5.2Mm Total Depth). Textured Surface Finish Helps With The Adhesion Of Lime Plaster And Other Finishes..
Features
- 100 - Extra strong load spreading 60mm washers designed for fixing and supporting rigid wood/wool insulation boards like Savolit, Pavatex, Celenit and Heraklith, permanently in place. Made from a high density reinforced plastic with a 30% fibreglass fill to increase both strength and rigidity. Proudly designed and manufactured by ourselves in the UK - Color Gray
- Low profile only 4.2mm when fixed (5.2mm total depth). Textured surface finish helps with the adhesion of Lime Plaster and other finishes.
- Suitable for screw size: #12 or #10 (3/16 or 5mm diameter)
- Heat resistance (Max continuous temperature 110C, Max use temperature, short peaks 140C). Flame Rating (3mm) HB - Test method UL94. Chemical inertness.
- All of our products are designed and manufactured by ourselves in the UK, using the very latest production technology to ensure that every single part we produce meets our design brief and your requirements.
- See more on Amazon...
Brand: hawkeng | Manufacturer: Hawksworth Engineering
Weight: 0.01 pounds
See On Amazon #11
MikroTik QuickMOUNT X
Asin: B08437B2VY | Model: QM-X | PartNumber: QM-X | Ean: 4250605580131, 4752224002532
Dimensions 60 X 56 X 35 Mm, Material Glass Fibre Reinforced Nylon.
Maximum Antenna Weight 2 Kg, Compatible Devices Sxtsq Series And Disc 5.
Tube Diameter 30 Mm, Max Tube Diameter To Which, Mount Can Be Attached 60 Mm.
It Is Lightweight, Easy To Use, Extremely Durable And Without Any Small Parts That Might Break.
Features
- The new QM-X adapter enables vertical and horizontal adjustment on the pole
- It is lightweight, easy to use, extremely durable and without any small parts that might break
- Dimensions 60 x 56 x 35 mm, Material Glass fibre reinforced nylon
- Tube diameter 30 mm, Max tube diameter to which, mount can be attached 60 mm
- Maximum antenna weight 2 kg, Compatible devices SXTsq series and DISC 5
- See more on Amazon...
Brand: MikroTik | Manufacturer: MikroTik
Dimensions: 9.06 x 15.75 x 18.50 inches | Weight: 0.44 pounds
See On Amazon #12
2.85mm(3mm) PA6-GF Nylon Filament 2.85mm Grey, 2kg Glass Fiber Nylon Filament 2.85, Polymaker PolyMide PA6-GF Warp Free Nylon, Print with 2.85mm Openning 3D Printers Only
Asin: B0B45PHTH5 | Model: PG02004 | PartNumber: PG02004 | Ean: 6938936712831
🧵 【Tangle Free & Resealable Bag】 - Our Glass Fiber Filled Nylon Filament 2.85 Is Carefully Winded To Avoid Any Tangling Issues, Dried And Vacuum Sealed In A Resealable Ziplock Bag With Desiccant. Please Make Sure To Never Let Go The Tip Of The Filament As It May Create Nodes. Holes On The Side Of The Spool Can Be Used To Prevent This Issue.
⚠️ 【Note】It Is Important To Have An Abrasion Resistant Nozzle Since There Is 25% Glass Fiber Inside This Nylon Filament. Polymide Pa6-Gf Is A Very Stiff Filament So It Is Required To Have A Good Set Up To Ensure A Good Feeding (Avoiding Excessive Bending In The Filament Guide System). It's Ultra Critical To Have Your Filament Enclosed In A Dessicant Box While Printing, And Keep Your Nozzles Clean Between Every 8 Prints Or So.
🛡️ 【Risk Free & Lifetime Technical Support】 - We Offer A Full Refund If The Product Is Not Performing As Expected. Let Us Help You Get Your Perfect Beautiful Prints And Contact Us Via Amazon Anytime You Need.
⚙️ 【Printing Setting】 - Nozzle: 280-300 ˚C; Bed Temperature: 25-50 ˚C (Do Not Exceed 50 ˚C); Speed: 30Mm/S – 60Mm/S; Annealing: 80℃ 6H (To Ensure A Good Heat Resistance Of Your Printed Part It Is Recommended To Anneal Your Print Model); Bed Surface: Almost Any Surface With A Thin Coat Of Pva Glue Or Magigoo Pa.
👉 【Wide Application】 - Polymide Pa6-Gf Is Very Strong, Durable And Features An Excellent Heat Resistance. It Can Be Used In Applications Requiring Torsional, Tensile, And Impact Strength Such As Bicycle Pedals, Brackets, Jigs, Drone Frame, Prosthetics Or Handles.
Features
- Stiff & Strong & Heat Resistant Nylon Filament - Polymaker PolyMide PA6-GF nylon filament 2.85mm is glass fiber reinforced Nylon 6 filament exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion
- Wide Application - PolyMide PA6-GF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, drone frame, prosthetics or handles
- Tangle Free & Resealable Bag - Our glass fiber filled nylon filament 2.85 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
- Printing Setting - Nozzle: 280-300 C; Bed Temperature: 25-50 C (Do NOT exceed 50 C); Speed: 30mm/s 60mm/s; Annealing: 80 6h (To ensure a good heat resistance of your printed part it is recommended to anneal your print model); Bed Surface: almost any surface with a thin coat of PVA glue or Magigoo PA
- Note It is important to have an abrasion resistant nozzle since there is 25% glass fiber inside this Nylon filament. PolyMide PA6-GF is a very stiff filament so it is required to have a good set up to ensure a good feeding (avoiding excessive bending in the filament guide system). It's ultra critical to have your filament enclosed in a dessicant box while printing, and keep your nozzles clean between every 8 prints or so
- RISK FREE & LIFETIME TECHNICAL SUPPORT - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Weight: 1.10 pounds
See On Amazon #13
50 x Glass Filled Reinforced Super Nylon Pan Head, Crosshead Machine Screws, M6 x 60mm, Plastic Nuts and Bolts, Washers, 15/64 x 2-23/64
Asin: B07SZ3TGJR | Ean: 0727040189303 | UPC: 727040189303
The Glass-Reinforced Nylon Has Outstanding Property Improvements Over Un-Reinforced Nylon Compositions..
Improvements Include Greater Tensile Strength, Deflection Temperature, Shear Strength, And Lower Moisture Absorption..
Comparable To Reny. 50X Bolts, 50X Washers, 50X Nuts..
Features
- Nylon+GF is a 50% glass fiber reinforced Super Nylon. Far stronger than the 30% version available.
- Comparable to RENY. 50x Bolts, 50x Washers, 50x Nuts.
- The Glass-Reinforced nylon has outstanding property improvements over un-reinforced Nylon compositions.
- Improvements include greater tensile strength, deflection temperature, shear strength, and lower moisture absorption.
- See more on Amazon...
Brand: Caterpillar Red | Manufacturer: Caterpillar Red
See On Amazon #14
20 x Glass Filled Reinforced, Super Nylon Socket Head, M8 x 60mm Plastic Nuts and Bolts, Washers, 5/16 x 2 23/64
Asin: B0CM9LLM53 | Ean: 5060744292371
The Glass-Reinforced Nylon Has Outstanding Property Improvements Over Un-Reinforced Nylon Compositions..
Improvements Include Greater Tensile Strength, Deflection Temperature, Shear Strength, And Lower Moisture Absorption..
Nylon+Gf Is A 50% Glass Fiber Reinforced Super Nylon. Far Stronger Than The 30% Version Available..
Features
- Comparable to RENY. 20x Bolts, 20x Washers, 20x Nuts.
- Nylon+GF is a 50% glass fiber reinforced Super Nylon. Far stronger than the 30% version available.
- The Glass-Reinforced nylon has outstanding property improvements over un-reinforced Nylon compositions.
- Improvements include greater tensile strength, deflection temperature, shear strength, and lower moisture absorption.
- See more on Amazon...
Brand: Caterpillar Red | Manufacturer: Caterpillar Red
See On Amazon #15
SHOUCAN Filament Tape Length 45M Thickness 0.13mm Width 30-40mm Heavy Duty Fiber Strapping Adhesive Packaging Tape,Width 60mm
Asin: B09P7X7RYV | Ean: 1054631530565
Advantage: Transparent Filament Strapping Tape With Smooth Surface Is Perfect For Packing, Strapping, Fixing, Reinforcing, Repairing And Palletizing..
Application: Filament Fiber Reinforced Tape Is Ideal For Furniture Maintenance, Heavy Duty Packing, Carton Sealing, Carpet Fixing, Toy& Vehicle Patching, Repairing And Protecting..
Scope Of Application: Bonds Easily To Most Surfaces Including Polished Wood, Plastic, Metal, Fiberboard, Cardboard Etc. Extremely Strong And Durable..
Features: Filament Reinforced Packing Tape With Weatherproof And Temperature Resistant, Suitable For Most Repairs, Green House And Outdoor Use..
Features
- Size: Each roll has width of 50mm/60mm/80mm/100mm, length of 45m and thickness of 0.13mm. Cut by scissors is required, this tape cannot be torn by hand.
- Features: Filament reinforced packing tape with weatherproof and temperature resistant, suitable for most repairs, green house and outdoor use.
- Advantage: Transparent filament strapping tape with smooth surface is perfect for packing, strapping, fixing, reinforcing, repairing and palletizing.
- Scope of application: Bonds easily to most surfaces including polished wood, plastic, metal, fiberboard, cardboard etc. Extremely strong and durable.
- Application: Filament fiber reinforced tape is ideal for furniture maintenance, heavy duty packing, carton sealing, carpet fixing, toy& vehicle patching, repairing and protecting.
- See more on Amazon...
Brand: SHOUCAN | Manufacturer: SHOUCAN
See On Amazon #16
10 x Glass Filled Reinforced, Super Nylon Hex Head, M10 x 60mm, Machine Screws, Plastic Nuts and Bolts, Washers, 25/64 x 2 23/64
Asin: B09J5D4VN1 | Ean: 5060744291473
The Glass-Reinforced Nylon Has Outstanding Property Improvements Over Un-Reinforced Nylon Compositions..
Improvements Include Greater Tensile Strength, Deflection Temperature, Shear Strength, And Lower Moisture Absorption..
Nylon+Gf Is A 50% Glass Fiber Reinforced Super Nylon. Far Stronger Than The 30% Version Available..
Features
- Comparable to RENY. 10x Bolts, 10x Washers, 10x Nuts.
- Nylon+GF is a 50% glass fiber reinforced Super Nylon. Far stronger than the 30% version available.
- The Glass-Reinforced nylon has outstanding property improvements over un-reinforced Nylon compositions.
- Improvements include greater tensile strength, deflection temperature, shear strength, and lower moisture absorption.
- See more on Amazon...
Brand: Caterpillar Red | Manufacturer: Caterpillar Red
See On Amazon
Looking For Something Else?
Search