ARCELI 5PCS 5V One Channel Relay Module Board Shield 5v Relay Module for PIC AVR DSP ARM for Relay
Asin: B07BVXT1ZK | Model: 00075 | PartNumber: 00075 | Ean: 0613835617826 | UPC: 613835617826
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.New 5V Relay Module.
100% Brand New.
This Product Contains 5 Modules.
5V Relay Module 1 Way Relay Module.
Features
- Name: kits module
- 5V relay module 1 way relay module
- New 5V relay module
- This product contains 5 modules
- 100% brand new
- See more on Amazon...
Brand: ICQUANZX | Manufacturer: ARCELI
See On Amazon Similar To ARCELI 5PCS 5V One Channel
#1
KeeYees 5pcs 1 Channel 5V Relay Module Board Shield KY-019 LED Indicator for Arduino + 3pcs 20CM 10Pin Female Male Jumper Wires
Asin: B07L6J6FHH | Model: KYES504-KY019-5 | PartNumber: KYES504-KY019-5 | Ean: 0705883356380 | UPC: 705883356380
No Need To Buy The Jumper Wires Extra, This Set Contains 20Cm 10Pin Female To Female, Female To Male, Male To Male Dupont Jumper Wires, With Which You Can Easier To Complete The Project..
This Relay Can Be Used Not Only As A Microcontroller Development Board Module, But Also As A Home Appliance Controller..
Features
- The relay can directly control a variety of equipment and loads, which meets international safety standards, and also has power and relay indicators.
- This relay can be used not only as a microcontroller development board module, but also as a home appliance controller.
- No need to buy the Jumper Wires extra, this set contains 20cm 10Pin female to female, female to male, male to male Dupont Jumper Wires, with which you can easier to complete the project.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #2
HiLetgo 2pcs 5V 30A One Channel Relay Module Optocoupler Isolation High and Low Trigger 5V
Asin: B0CHFJSNP6
Friendly Interface Design, All Interfaces Can Be Directly Connected Through The Terminal Leads, Very Convenient..
With Optocoupler Isolation, Strong Drive Capability, Stable Performance; Trigger Current 5Ma..
Features
- 5V 12V 24V 30A One Channel Relay Module Optocoupler Isolation High and Low Trigger
- With optocoupler isolation, strong drive capability, stable performance; trigger current 5mA.
- Friendly interface design, all interfaces can be directly connected through the terminal leads, very convenient.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
Diitao 10PCS DC 5V 1 Channel Relay Module Interface Board Shield Low Level Trigger Extension Board for SCM Household Appliance Control DIY 1 Road 5V (5V 1-Channel)
Asin: B0BB6QLMFW | Model: DT081803 | PartNumber: DT081803 | Ean: 0687117700421 | UPC: 687117700421
The Control Dc Or Ac Signal, You Can Control 220V Ac Load..
Blue Kf301 Terminals To The Control Line Is More Convenient..
There Is A Normally Open And One Normally Closed Contact..
With The Power Supply And Relay Instructions, Pull Off, Disconnect Does Not Shine..
Features
- The module complies with international safety standards, the control area and the load region isolation trench.
- With the power supply and relay instructions, pull off, disconnect does not shine.
- The control DC or AC signal, you can control 220V AC load.
- There is a normally open and one normally closed contact.
- Blue KF301 terminals to the control line is more convenient.
- See more on Amazon...
Brand: Diitao | Manufacturer: Diitao
See On Amazon #4
ACEIRMC 5V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY Kit PiC ARM AVR (2pcs)
Asin: B0CHY2WQ3M | Ean: 0687117730541 | UPC: 687117730541
The Control Signal Voltage Range: The Trigger Signal Is Low 0-2V; High Voltage Must Not Exceed 5V..
Dc 5V 16 Channel Relay Module Interface Board With Optocoupler Protection Lm2576 Power For Arduino Diy Kit.
Standard Interface That Can Be Controlled Directly By Microcontroller (For Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp433, Ttl Logic).
Equipped With High-Current Relay, Ac250v 10A ; Dc30v 12A.
Features
- 5V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equipped with high-current relay, AC250V 10A ; DC30V 12A
- The control signal voltage range: the trigger signal is low 0-2V; high voltage must not exceed 5V.
- Standard interface that can be controlled directly by microcontroller (for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic)
- DC 5V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: Organizer
See On Amazon #5
Cylewet 10Pcs 2 Channel Logic Level Converter 3.3V to 5V TTL Module for Arduino (Pack of 10) CYT1070
Asin: B073D4DJDC | Model: 4328462350 | PartNumber: 4328462350 | Ean: 0661273664698, 0751940149389 | UPC: 661273664698, 751940149389
Converter 3.3V To 5V.
Brand: Cylewet | Manufacturer: Qianxin
See On Amazon #6
1 Channel Relay Shield Module, 10PCS DC 5V Indicator Light LED Module for Arduino R3 MEGA 2560 1280 ARM PIC AVR STM32 Raspberry Pi MCU DSP Official Boards Shield (10PCS)
Asin: B096S15761 | Ean: 0701715466593 | UPC: 701715466593
The Control Signal Dc Or Ac, 220V Ac Load Can Be Controlled..
Input Section: Vcc: Connect 5V Positive Pole Power Supply Gnd: Connect 5V Negative Pole Power Supply.
This Relay Can Be Used Not Only As A Microcontroller Development Board Module, But Also As A Home Appliance Controller..
5 V-12V To Ttl Control Signal.
Features
- 5V Relay Module
- 5 V-12V to TTL control signal
- The control signal DC or AC, 220V AC load can be controlled.
- This relay can be used not only as a microcontroller development board module, but also as a home appliance controller.
- Input Section: VCC: Connect 5V Positive Pole Power Supply GND: Connect 5V Negative Pole Power Supply
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
See On Amazon #7
Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger
Asin: B08C71QL65 | Model: Aoicrie | PartNumber: Aoicrie | Ean: 0701715434639 | UPC: 701715434639
These Relay Board Use Photocoupler Isolation That Has Strong Driving Ability And Stable Performance.The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.The Module Has A Jumper So You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
Wide Application These 5V Relay Board Works Well With For Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine /Etc..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance.Fault Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate; And Interface Design Humanized, All The Interface Can Be Directly Connected Through The Terminal Lead, So Convenient..
Main Specification Peak Load Of No Connector: Ac 250V/10A, Dc 30V/10A; Trigger Current: 5Ma; The Module Operating Voltage:5V..
Features
- This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A; Trigger Current: 5mA; The Module Operating Voltage:5V.
- These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input; Coil +, coil - and trigger.
- Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate; And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient.
- Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc.
- See more on Amazon...
Brand: AOICRIE | Manufacturer: AOICRIE
See On Amazon #8
VKLSVAN 5 PCS DC 5V 1 Channel Relay Module Board Shield Relay Switch High/Low Level Trigger with Optocoupler
Asin: B0CLY99KDK
【Stable Performance】High Quality Relay, Using Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
【Wide Application】Dc 5V Relay Module Compatible With Arm /Pic /Avr /Mcu/Raspberry Etc..
【Fault-Tolerant Design】 Even If The Control Line Is Broken, The Relay Will Not Move. All Interfaces Of Relay Can Be Wired Out Through The Terminals Directly,Normally Open And Normally Closed..
【Module Parameters】The Module Voltage 5V, Maximum Load: Ac 250V/10A, Dc 30V/10A..
Features
- convenient to use The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.normally open interfaces Can be set high or low triggered by jumper.
- Module parameters The module voltage 5V Maximum load: AC 250V/10A, DC 30V/10A.
- stable performance High quality relay, using optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design Even if the control line is broken, the relay will not move. All Interfaces of relay can be wired out through the terminals directly,normally open and normally closed.
- Wide Application DC 5V Relay Module compatible with ARM /PIC /AVR /MCU/Raspberry etc.
- See more on Amazon...
Brand: VKLSVAN | Manufacturer: VKLSVAN
See On Amazon #9
DAOKI 5PCS 5V One 1 Channel Relay Module Board Shield with optocoupler Support High and Low Level Trigger
Asin: B00XAGT052 | Model: TS-US-071-CA | PartNumber: TS-US-071-CA | Ean: 0695259095893 | UPC: 695259095893
The Module Operating Voltage 5V..
Module Size: 50Mm*26Mm*18.5Mm (L*W*H)..
The Module Can Be High Or Low By A Jumper Setting Trigger..
Using Smd Optocoupler Isolation, Driving Ability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA.
- The module Operating voltage 5V.
- The module can be high or low by a jumper setting trigger.
- Module size: 50mm*26mm*18.5mm (L*W*H).
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Dimensions: 1.20 x 3.90 x 2.00 Inches | Weight: 0.24 pounds
See On Amazon #10
DONGKER 4-Channel PLC Amplifier Circuit Board,DC 3.3V/5V Photoelectric Optoisolator Drive Module Optocoupler Isolation Board
Asin: B0B6PNZJ3C | Model: 1 | PartNumber: 1 | Ean: 0774827372229 | UPC: 774827372229
It Has A Signal Indicator And A Power Indicator,Which Can Be Used To See The Working Status Of The Module..
Shop With Confidence: To Provide You With The Highest Quality Service, If You Have Any Question, Please Feel Free To Contact Us.We Will Provide After-Sales Service Until You Are Satisfied..
It Responds Quickly..
It Supports Anti-Reverse Protection..
Features
- It adopts DIN35mm flame retardant shell and standard guide rail type installation design.
- It supports anti-reverse protection.
- It has a signal indicator and a power indicator,which can be used to see the working status of the module.
- It responds quickly.
- SHOP WITH CONFIDENCE: To provide you with the highest quality service, If you have any question, please feel free to contact us.We will provide after-sales service until you are satisfied.
- See more on Amazon...
Brand: DONGKER | Manufacturer: DONGKER
See On Amazon #11
Cermant 5pcs 1 Channel DC 5V Relay High Level Driver Module Optocoupler Relay Module
Asin: B0B4N3SF9R | Model: Celent_CL205-211 | PartNumber: Celent_CL205-211
Equipped With A Terminal Block And Fixed Bolt Holes On Both Sides (Diameter: 3.1Mm), The Interface Can Be Directly Connected Through The Terminal Block..
Support All Scm Control, Widely Used In Plc Control, Home Intelligent Control,Industry Etc..
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move.
Smd Optocoupler Isolation, Strong Driving Ability, Stable Performance; Trigger Current 5Ma.
Features
- Module uses genuine high quality relay, normally open interface maximum load: AC 250V / 10A, DC 30V / 10A
- SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
- Equipped with a terminal block and fixed bolt holes on both sides (diameter: 3.1mm), the interface can be directly connected through the terminal block.
- Fault-tolerant design, even if the control line is broken, the relay will not move
- Support all SCM control, widely used in PLC control, home intelligent control,industry etc.
- See more on Amazon...
Brand: Cermant | Manufacturer: Cermant
See On Amazon #12
JAMCHE 10pcs/lot 1 Channel 5V Relay Module 1-Channel Realy KY-019 for
Asin: B0CJ6TS7MW | Ean: 8177720402963
Brand: JAMCHE | Manufacturer: JAMCHE
Weight: 0.00 pounds
See On Amazon #13
ILAME 1PCS 5V 2-Channel Relay Module Shield for Arduino Electronic 5V 10A 2 Channel Relay Module
Asin: B0C69Z9YMQ | Ean: 8357709367098
Brand: JENKEM | Manufacturer: ILAME
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search