Crown Pro XTI4002 XTI 4002 3200w DSP Amplifier+Audio Technica Headphones+Cables
Asin: B07D32RKNT | Model: XTI4002+ATH-PRO7X+Cables Pack | PartNumber: XTI4002+ATH-PRO7X+Cables Pack | Ean: 0613815775973 | UPC: 613815775973
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.New System Monitoring Provides Software Visibility Of Ac Line Voltage And Power Supply Temperature. Integrated Cast-Aluminum Handles For Easy Handling And Enhanced Durability. Locking Power Cord Clip Provides A Secure Connection Between The Amplifier And Power Cord. Updated Hiqnet Band Manager And System Architect Control Software. Increased Number Of Presets To A Total Of 30; 29 Of Which Are User Definable. Performance. Sensitivity (For Full Rated Power At 4 Ohms): 1.4 Vrms.
Ac Line Current(120 Vac Amplifier Playing 1/8 Power Pink Noise Into 4 Ohms Per Ch): 10.5A; No More Than 38W At Idle. Operating Temperature: 0C To 40C At 95% Relative Humidity (Non-Condensing). Controls. Level: Two Front-Panel Rotary Level Controls, One For Each Channel. Power Switch: On/Off Switch Applies Ac Power To The Amplifier. Sel/Prev/Next Buttons: Three Buttons Near The Lcd Screen That Are Used To Access Menu Items And Front Panel Lockout.
Frequency Response (At 1 Watt, 20 Hz - 20 Khz): +0 Db, 1 Db. Signal-To-Noise Ratio (Below Rated 1Khz Power At 8 Ohms): 100 Db (A Weighted). Total Harmonic Distortion (Thd): < 0.5%. Damping Factor 20 Hz To 1 Khz: > 500. Crosstalk (Below Rated Power): 20 Khz - 1 Khz: > 70 Db. Input Impedance (Nominal). Balanced: 20K Ohms. Unbalanced: 10K Ohms. Maximum Input Signal: +22 Dbu Typical. Ac Line Voltage And Frequency Configurations: 100 Vac, 120 Vac, 220-240 Vac 50/60 Hz.
Bridge Rms Power @ 8 Ohm: 2400 Watt X 1. Bridge Rms Power @ 4 Ohm: 3200 Watt X 1. Peak Plus Limiters Provide The Ultimate In System Performance And Protection By Allowing Full Control Over Threshold, Attack, And Release. Enhanced Subharmonic Synth Section Provides User Control Over Frequency, Gain And Filter Type For System-Specific Tuning. 3 User-Defined Fan Mode Controls - Normal, Early And Fullspeed - For Matching Fan Performance To A Specific Application.
Features
- Package Includes: (1) Crown Pro XTI4002 XTI 4002 3200w Professional Power Amplifier Amp, Advanced DSP. (1) Audio Technica ATH-PRO7X Professional On-Ear DJ Headphones w/ 45mm Drivers. (2) RockvilIe RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper. (2) Rockvile RCSS1610 10' 16 AWG Speakon to Speakon Speaker Cable 100% Copper. Features ofXTI4002: XTI4002 2 Channe Power Amplifier. RMS Power @ 2 Ohm: 1600 Watt x 2. RMS Power @ 4 Ohm: 1200 Watt x 2. RMS Power @ 8 Ohm: 650 Watt x 2
- Bridge RMS Power @ 8 Ohm: 2400 Watt x 1. Bridge RMS Power @ 4 Ohm: 3200 Watt x 1. Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release. Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning. 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application
- New system monitoring provides software visibility of AC line voltage and power supply temperature. Integrated cast-aluminum handles for easy handling and enhanced durability. Locking power cord clip provides a secure connection between the amplifier and power cord. Updated HiQnet Band Manager and System Architect control software. Increased number of presets to a total of 30; 29 of which are user definable. Performance. Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
- Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, 1 dB. Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted). Total Harmonic Distortion (THD): < 0.5%. Damping Factor 20 Hz to 1 kHz: > 500. Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db. Input Impedance (nominal). Balanced: 20k ohms. Unbalanced: 10k ohms. Maximum Input Signal: +22 dBu typical. AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
- AC Line Current(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 10.5A; no more than 38W at idle. Operating Temperature: 0C to 40C at 95% relative humidity (non-condensing). Controls. Level: Two front-panel rotary level controls, one for each channel. Power Switch: On/Off switch applies AC power to the amplifier. Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout
- See more on Amazon...
Brand: Audio-Technica
See On Amazon Similar To Crown Pro XTI4002 XTI 4002
#1
Crown XTi1002 Two-channel, 500-Watt at 4 Power Amplifier
Asin: B004ZGBLJO | Model: XTi1002 | PartNumber: XTi1002 | Ean: 0886830405082, 0871015005232 | UPC: 886830405082, 871015005232
3 User-Defined Fan Mode Controls – Normal, Early And Full Speed – For Matching Fan Performance To A Specific Application.
Input: Xlr (X2); Output: Xlr (X2), Speakon (X2), Binding Post (X2 Pair).
Power: 700W At 2Ω, 500W At 4Ω, 275W At 8Ω.
Integrated Cast-Aluminum Handles For Easy Handling And Enhanced Durability.
Enhanced Subharmonic Synth Section Provides User Control Over Frequency, Gain And Filter Type For System-Specific Tuning.
Features
- Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- 3 User-defined fan mode controls normal, early and full speed for matching fan performance to a specific application
- Integrated cast-aluminum handles for easy handling and enhanced durability
- Input: XLR (x2); Output: XLR (x2), Speakon (x2), Binding Post (x2 pair)
- Power: 700W at 2 , 500W at 4 , 275W at 8
- See more on Amazon...
Brand: Crown | Manufacturer: Crown
Dimensions: 3.50 x 19.00 x 12.25 Inches | Weight: 9.80 pounds
See On Amazon #2
Crown XTi4002 Two-channel, 1200-Watt at 4 Power Amplifier
Asin: B004ZGB2RK | Model: XTi4002 | PartNumber: XTi4002 | Ean: 0871015005416, 4016138720617, 0871015005454, 0871015005393, 0852675016417 | UPC: 852675016417, 871015005454, 871015005416, 871015005393
3 User-Defined Fan Mode Controls – Normal, Early And Full Speed – For Matching Fan Performance To A Specific Application.
Input: Xlr (X2); Output: Xlr (X2), Speakon (X2), Binding Post (X2 Pair).
Power: 1600W At 2Ω, 1200W At 4Ω, 650W At 8Ω.
Integrated Cast-Aluminum Handles For Easy Handling And Enhanced Durability.
Enhanced Subharmonic Synth Section Provides User Control Over Frequency, Gain And Filter Type For System-Specific Tuning.
Features
- Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- 3 User-defined fan mode controls normal, early and full speed for matching fan performance to a specific application
- Integrated cast-aluminum handles for easy handling and enhanced durability
- Input: XLR (x2); Output: XLR (x2), Speakon (x2), Binding Post (x2 pair)
- Power: 1600W at 2 , 1200W at 4 , 650W at 8
- See more on Amazon...
Brand: dbx | Manufacturer: Crown
Dimensions: 3.50 x 12.24 x 19.02 inches | Weight: 21.61 Pounds
Warranty: Crown no-fault fully-transferable 3-year warranty completely protects your investment.
See On Amazon
Looking For Something Else?
Search