OSTENT 3D Button Analog Joystick Stick Replacement for Nintendo 3DS LL
Asin: B07D3SHL8H | Ean: 0609652488411 | UPC: 609652488411
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Installation Is Simple And Can Be Done Without Technical Knowledge.
Compatible With: Nintendo 3Ds Ll/Xl.
Easy To Remove And Install.
Replace That Old, Worn Out, Dirty, Sticky Joystick With A Brand New One.
Features
- The joystick for Nintendo 3DS LL/XL enhances accurate movements while playing
- Replace that old, worn out, dirty, sticky joystick with a brand new one
- Installation is simple and can be done without technical knowledge
- Easy to remove and install
- Compatible with: Nintendo 3DS LL/XL
- See more on Amazon...
Brand: OSTENT | Manufacturer: OSTENT
See On Amazon Similar To OSTENT 3D Button Analog Joystick
#1
ElecGear 4X Replacement Joystick (EL2 FU 10K) + 4X Drift Fix PCB for PS4 / PS3 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module for Playstation
Asin: B07R7RJ4KY | Model: EL2-FU-10K | PartNumber: EL2-FU-10K | Ean: 0682141318000 | UPC: 682141318000
[Additional Resistor] – Complicated Moving Mechanism And Daily Wear And Tear Finally Caused Drifting. Even New Sensors Cannot Be 100% Balanced. Calibrating In Controller Settings Might Not Work. We Packed 10X Correction Resistors To Solve The Potential Problem In Hardware Level. Solder One Or Two Paralleled Tiny Resistors Onto The Potentiometer At The Opposite Direction Against Drifting. It Will Help Correct 3 To 5 Degrees Drifting.
[Reminder Of Diy] – With As Many As 14 Prongs, De-Soldering And Soldering The Whole Module Takes Serious Skills. We Suggest Replacing The Potentiometers First To Solve Most Of The Joystick Problems. To Desolder The Entire Joystick Module Off Pcb By A Normal Soldering Iron, Please Take A Look At The Desoldering Kit At Product Id: B0bk7169m8.
[When To Replace] – The Analog Joystick Needs To Be Replaced When Your Controller Has The Problem Of Drifting, Creeping, Stuttering, A Blind Spot, A Dead Spot, A Dead Zone, No Reaction When Clicking, Or It Wouldn't Center After Years Of Wear And Tear. The Oem Genuine Repair Parts Ensure Accuracy And Prolong Lifespan.
[Compatibility] – The 14 Prongs Were Positioned As The Same As Alps Edition. Technically, The Whole Unit Is Interchangeable With El1 Alps 10K Used In Ps4 Controllers, And Other Brands Like ‘Scuf’ And ‘Razer Raiju Ultimate’ With Alps Joysticks Inside. However, The Trim Pot Resistor Alone Is Not Interchangeable With Alps Edition.
Features
- [EL2 FU 10K for PS4/PS3 Controller] 4x replacement analog joystick was found in some PS4 DualShock 4 came with PlayStation 4 Pro, and some PS3 controllers also use this version. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10K trimmer potentiometers in orange
- [Compatibility] The 14 prongs were positioned as the same as ALPS edition. Technically, the whole unit is interchangeable with EL1 ALPS 10K used in PS4 controllers, and other brands like Scuf and Razer Raiju Ultimate with ALPS joysticks inside. However, the trim pot resistor alone is not interchangeable with ALPS edition
- [Additional Resistor] Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting
- [When to replace] The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan
- [Reminder of DIY] With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. We suggest replacing the potentiometers first to solve most of the joystick problems. To desolder the entire joystick module off PCB by a normal soldering iron, please take a look at the desoldering kit at product ID: B0BK7169M8
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
See On Amazon #2
SJ@JX Arcade Game Controller 3D Gamepad Analog Stick Sensor Fly Joystick Microswitch MX LED Button USB Encoder Light Cable for PC PS3 Nintendo Switch Android Raspberry Pi
Asin: B08Q774Z2P | Ean: 0727277902966 | UPC: 727277902966
3D Joystick For Flight Simulation Games, Analogue Stick Thumb Sticks Joystick Cap Mushroom Head..
Size: 8.5Cm X 3Cm. Usb Cable 180Cm. Button Cable 20Cm. Button Hole 28Mm..
New 4 - 8 Way 5V Led Illuminated Joystick. Microswitch Reliability Tested To 20 Million Cycles..
Developed For Nintendo Switch Game Console. Make Sure To Open Pro Controller Wired Communication.
Features
- Cherry MX Black Switch Button. Non-clicky Recycling 50 million times. Contains Logo and LED.
- Developed for Nintendo Switch game console. Make sure to open Pro Controller Wired Communication
- 3D joystick for flight simulation games, Analogue Stick Thumb sticks Joystick Cap Mushroom Head.
- New 4 - 8 Way 5V LED Illuminated Joystick. Microswitch reliability tested to 20 million cycles.
- Size: 8.5cm x 3cm. USB Cable 180cm. Button Cable 20cm. Button Hole 28mm.
- See more on Amazon...
Brand: SJ@JX | Manufacturer: SJ@JX
See On Amazon #3
3D Analog Stick Sensor Module Potentiometer Joystick ThumbSticks Caps Mushroom Cap for DualSense Playstation 5 PS5 Controller (Analog Joystick)
Asin: B09DNTRDKT | Model: 88 | PartNumber: 88 | Ean: 8425553216616
Products Include : 2Pcs*3D Analog Potentiometer.
This 3D Analog Sensor Module Is Used For Fixing Your Controller..
Applicable Model :Ps5.
Features
- Please confirm this item is the right model you need before placing order. Most repair parts are only suitable for special model.
- Applicable model :PS5
- Products include : 2Pcs*3D Analog Potentiometer
- This 3D Analog Sensor Module is used for fixing your controller.
- See more on Amazon...
Brand: guanximaoyi | Manufacturer: guanximaoyi
See On Amazon #4
12pcs Replacement 3pin ALPS 3D Joystick Analog Thumb Stick for PS4 Controller 3 Repair Parts
Asin: B0BQ25JVBT | Ean: 0770651597678 | UPC: 770651597678
Professional Repairment Skills Requried..
Package: 12Pcs Of 3Pin Alps Stick.
The Replacement 3Pin Alps Stick Is Only For Repairing Your Broken, Damaged Or Defective Joystick Of Ps4 Controllers..
The Replacement Drive Rolleris Compatible With Ps4 Only..
Features
- It's a replacement 3pin ALPS 3D joystick Analog Thumb Stick original version.
- The replacement Drive Rolleris compatible with PS4 only.
- Professional repairment skills requried.
- The Replacement 3pin ALPS Stick is only for repairing your broken, damaged or defective joystick of PS4 controllers.
- Package: 12pcs of 3pin ALPS Stick
- See more on Amazon...
Brand: VANJUNN | Manufacturer: WIDTECH
See On Amazon #5
OSTENT 3D Button Analog Joystick Stick Repair Replacement for Sony PSP 2000 Console - Pack of 2
Asin: B07D3S9N6P | Ean: 0609652490186 | UPC: 609652490186
Remove The Old One With A Screw Driver. Plug In The New One And Screw It Again..
Takes Care Of Any Joystick Problems You May Be Having..
Very Easy To Pop Into Place, All You Need Is A Screwdriver And About 5 Minutes..
Comes With The Thumb Button..
Features
- Easy to install. No soldering needed.
- Comes with the thumb button.
- Remove the old one with a screw driver. Plug in the new one and screw it again.
- Very easy to pop into place, all you need is a screwdriver and about 5 minutes.
- Takes care of any joystick problems you may be having.
- See more on Amazon...
Brand: OSTENT | Manufacturer: OSTENT
See On Amazon #6
OSTENT 3D Button Analog Joystick Stick Repair Replacement for Sony PSP 2000 Console - Pack of 5
Asin: B07D3RV7NQ | Ean: 0609652490179 | UPC: 609652490179
Remove The Old One With A Screw Driver. Plug In The New One And Screw It Again..
Takes Care Of Any Joystick Problems You May Be Having..
Very Easy To Pop Into Place, All You Need Is A Screwdriver And About 5 Minutes..
Comes With The Thumb Button..
Features
- Easy to install. No soldering needed.
- Comes with the thumb button.
- Remove the old one with a screw driver. Plug in the new one and screw it again.
- Very easy to pop into place, all you need is a screwdriver and about 5 minutes.
- Takes care of any joystick problems you may be having.
- See more on Amazon...
Brand: OSTENT | Manufacturer: OSTENT
See On Amazon #7
3D Joystick Module, PS5 Replacement Joystick 3D Analog Joystick Module Sensor Stick Replacement Analog 3D Joysticks Replacement for PS5 Game Controller
Asin: B0D4615SXY | Model: Pissenten8hfb46com | PartNumber: Pissenten8hfb46com
Precise And Compact Design Replacement Joystick: Our Joystick Features A Compact And Precise Design That Is Easy To Install And Use. This Product Ensures An Enhanced Gaming Experience, Making Your Gameplay Smoother And More Enjoyable..
Convenient Accessories For Ps5 Gamepad: With Its Stable Performance, Our Replacement Joystick Provides The Most Comfortable Gaming Experience. This Accessory Is A Must-Have For Maintaining The Performance Of Your Ps5 Gamepad, Ensuring Gaming Every Time..
Accurate Analog Stick For Ps5: Crafted From Premium Abs Materials, Our Analog Stick Ensures Accuracy And Durability For Extended Use. With This Accessory, You Can Trust Your Controller To Deliver Top-Notch Gaming Performance..
Replacement Joystick For Ps5: This Replacement Joystick Is The Perfect Solution For Damaged, Insensitive, Or Non-Working Controller Joysticks. Breathe New Life Into Your Ps5 Controllers And Elevate Your Gaming Experience With Our Reliable Joystick..
Features
- Perfectly Adapted 3D Joystick for PS5: Our replacement joystick is specifically designed for PS5 controllers. It offers a perfect fit and seamless , ensuring that your gaming sessions are as immersive and enjoyable as possible.
- Replacement Joystick for PS5: This replacement joystick is the perfect solution for damaged, insensitive, or non-working controller joysticks. Breathe new life into your PS5 controllers and elevate your gaming experience with our reliable joystick.
- Precise and Compact Design Replacement Joystick: Our joystick features a compact and precise design that is easy to install and use. This product ensures an enhanced gaming experience, making your gameplay smoother and more enjoyable.
- Accurate Analog Stick for PS5: Crafted from premium ABS materials, our analog stick ensures accuracy and durability for extended use. With this accessory, you can trust your controller to deliver top-notch gaming performance.
- Convenient Accessories for PS5 Gamepad: With its stable performance, our replacement joystick provides the most comfortable gaming experience. This accessory is a must-have for maintaining the performance of your PS5 gamepad, ensuring gaming every time.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #8
2-Pack 3D Analog Joystick Replacement for Switch
Asin: B0CWNMGZZV
Brand: Generic | Manufacturer: eletronico
See On Amazon #9
YTHYTHYTH for 2pcs a lot Black 3D Analog Joystick Stick Button Sensor Module for for PSP 3000 Replacement Part
Asin: B0CQK3DKSY | Model: 8012111199551 | PartNumber: 8012111199551 | Ean: 8012111199551
Brand: YTHYTHYTH | Manufacturer: YTHYTHYTH
See On Amazon #10
SYH&AQYE 2pcs 3D Button Thumbstick Stick Joystick Rocker, Analog 3D Button Joystick Replacement Parts for 2000 Super Light
Asin: B0C5XQ3SC3 | Ean: 7419181451458
This Product With High Quality Bring You An Excellent Using Experience..
Compatible With Psp2000, A Good Choice Of Your Game Joystick..
The Excellent Design Help You To Control Your Game More Flexibly And Accurately, Smoothly..
Delicate And Stylish Design, Easy To Stall..
Features
- Round touch button fits for ergonomic design to ensures a good touch feeling.
- Delicate and stylish design, easy to stall.
- This product with high quality bring you an excellent using experience.
- The excellent design help you to control your game more flexibly and accurately, smoothly.
- compatible with PSP2000, a good choice of your game joystick.
- See more on Amazon...
Brand: SYH&AQYE | Manufacturer: SYH&AQYE
Dimensions: 0.43 x 1.10 x 0.71 Inches | Weight: 0.02 Pounds
See On Amazon
Looking For Something Else?
Search