CICMOD Intake Manifold Carburetor Boot Joints for Yamaha Grizzly Yfm 600 1998 1999 2000 2001
Asin: B07DC3WT6L | Model: CP4112 | PartNumber: CP4112 | Ean: 8575675667961
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Carburetor Intake Manifold Boot Is Made Of Premium Material, Sturdy And Resistant, Good Sealing Performance.
Package Included: 1 X Intake Manifold Boot; 1 X Hose Clamp.
Easy To Install: Direct Replace The Old Or Broken One.
Fits On O.E.M And Aftermarket Carburetors. Part Number: 4Wv-13596-00-00, 4Wv135960000, 4Wv-13596-00, 4Wv1359600, 4Wv1359600.
Features
- Fitment: Fits for Yamaha Grizzly YFM 600 Models, Year: 1998 1999 2000 2001
- Fits on O.E.M and Aftermarket Carburetors. Part Number: 4WV-13596-00-00, 4WV135960000, 4WV-13596-00, 4WV1359600, 4WV1359600
- This carburetor intake manifold boot is made of premium material, sturdy and resistant, good sealing performance
- Easy to Install: Direct replace the old or broken one
- Package included: 1 x Intake Manifold Boot; 1 x Hose Clamp
- See more on Amazon...
Brand: CICMOD | Manufacturer: CICMOD
See On Amazon Similar To CICMOD Intake Manifold Carburetor Boot
#1
NIBBI Replacement Orginal High Performance CG Intake Manifold Air Joint Boot Connector For Motorcycle Motorcross Dirt Bike CG, Rubber
Asin: B07KR27M2N | Ean: 0192242955986 | UPC: 192242955986
Rubber Side: 33Mm, And Rubber Joint Is 1 3/8 Inch.
Mounting Holes: 48Mm(Bolt To Bolt).
33Mm Rubber Fit For 26Mm 28Mm 30Mm Carburetor..
Features
- Modified manifold fit for the most dirt bike mini bike Apollo CG TTR SSR
- 33mm rubber fit for 26mm 28mm 30mm carburetor.
- Rubber Side: 33mm, and rubber joint is 1 3/8 inch
- Mounting Holes: 48mm(Bolt to Bolt)
- See more on Amazon...
Brand: nibbi | Manufacturer: NIBBI
See On Amazon #2
MOTOKU Pack of 2 Carburetor Intake Manifold Boot Carb Joint Insulator for Honda Shadow VLX 600 VT600 Spirit 750 ACE VT750
Asin: B07XHJ53JH | Model: 16211-75T-417 | PartNumber: 16211-75T-417 | Ean: 6972301982023
Compatible With Vt750cd Shadow Dlx 98-01;Vt750cd2 Shadow Dlx 98-01; Vt750cd Shadow Dlx Ace 02-03; Vt750dc-Dcb Shadow Spirit 01-07.
Features
- Compatible with Honda VT600C VLX Shadow 88-97; VT600CD AC Shadow 89-90; VT600CD Shadow DLX 93-00;
- Compatible with VT750CD Shadow DLX 98-01;VT750CD2 Shadow DLX 98-01; VT750CD Shadow DLX ACE 02-03; VT750DC-DCB Shadow Spirit 01-07
- See more on Amazon...
Brand: MOTOKU | Manufacturer: MOTOKU
See On Amazon #3
NIBBI Orginal High Performance CQR Intake Manifold Air Joint Boot Connector For Motorcycle Motorcross Dirt Bike Kawasaki CQR250 CRF
Asin: B07PCN9MQW | Ean: 0635028033855 | UPC: 635028033855
Mounting Holes: 62Mm(Bolt To Bolt).
Rubber Side: 33Mm, And Rubber Joint Is 1 3/8 Inch.
33Mm Rubber Fit For 26Mm 28Mm 30Mm Carburetor..
Features
- CQR Intake Manifold Air Joint Boot Connector For Motorcycle Motorcross Dirt Bike Kawasaki CQR250 CRF
- 33mm rubber fit for 26mm 28mm 30mm carburetor.
- Mounting Holes: 62mm(Bolt to Bolt)
- Rubber Side: 33mm, and rubber joint is 1 3/8 inch
- See more on Amazon...
Brand: nibbi | Manufacturer: NIBBI
See On Amazon #4
NIBBI Motorcycle Intake Manifold,Carburetor Boot Joints,Intake Manifold Air Joint Boot Connector For Motorcross Dirt Bike CQR250 CRF
Asin: B09VZ6ZFQX | Model: QG-ZL | PartNumber: QG-ZL | Ean: 0749212951563 | UPC: 749212951563
Easy To Install: Come With Adjustable Clamp, Quickly Installed.Before Installation, Please Measure Whether The Installation Size Of Your Motorcycle Is Suitable..
Contact Us:We Are Always Available To Help Our Customers.Please Contact Us For Replacement Or Refund If You Are Not Satisfied With The Order..
Size:Diameter Of Carburetor Connection:32Mm;Engine Side Diameter:30Mm.
Good Sealing For Better Work Between Your Carburetor And Engine. Improves Throttle Response, Add More Horsepower..
Features
- Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation
- Good sealing for better work between your carburetor and engine. Improves throttle response, add more horsepower.
- Easy to Install: Come with adjustable clamp, quickly installed.Before installation, please measure whether the installation size of your motorcycle is suitable.
- SIZE:Diameter of carburetor connection:32mm Engine side diameter:30mm
- Contact us:We are always available to help our customers.Please contact us for replacement or refund if you are not satisfied with the order.
- See more on Amazon...
Brand: nibbi
See On Amazon #5
PRO BAT Intake Manifold Pipe 26mm Carburetor intake Manifold Gasket Spacer Screw Kit for 110cc 125cc 140cc 150cc Kazuma ATV Lifan YX Dirt Bike 56-2 FA
Asin: B07JQ1XPLD | Model: DHSM562 | PartNumber: DHSM562 | Ean: 8011511432220
Bolt Hole Spacing Carburetor Side - 48Mm.
Fits Models: Kazuma Meerkat 50 Falcon 90 Redcat 110 Atv Quad Taotao Kaya Dirt Bike Lifan Zongshen Yx Rocekta Baja Coolster Jcl.
Displacement (Ml):110Cc 125Cc 140Cc 150Cc 160Cc.
Bolt Hole Spacing Cylinde Head Side - 45Mm.
Features
- 56-2 FA Intake Manifold Pipe Gasket Set
- Bolt Hole Spacing Cylinde Head Side - 45mm
- Bolt Hole Spacing Carburetor Side - 48mm
- Displacement (ml):110CC 125CC 140CC 150CC 160CC
- Fits Models: Kazuma Meerkat 50 Falcon 90 Redcat 110 ATV Quad Taotao Kaya Dirt Bike Lifan ZongShen YX Rocekta Baja Coolster JCL
- See more on Amazon...
Brand: PRO BAT | Manufacturer: PRO BAT
Weight: 0.29 pounds
See On Amazon #6
NIBBI Racing Parts Motorcycle 125CC Air Intake Manifold 33mm Carburetor Manifold Carburetor Adapter Manifold Adapter Intake Manifold Boot for YAMAHA Minibike Dirt Bike Motorcross TTR SSR
Asin: B075848ND5 | Model: QG-WS01 | PartNumber: QG-WS01 | Ean: 6866272124929, 0791334242036, 0635028371551 | UPC: 791334242036, 635028371551
Package Dimensions: ????3.78 Inch L X 2.83 Inch W X 2.72 Inch H.
Item Model Number: ?Qg-Ws01.
Highly Durable.
Features
- Rust resistant and efficient
- Highly durable
- Package dimensions: ????3.78 inch L x 2.83 inch W x 2.72 inch H
- Item model number: ?QG-WS01
- See more on Amazon...
Brand: nibbi | Manufacturer: NIBBI RACING PARTS
See On Amazon #7
NIBBI Motorcycle Intake Manifold,Carburetor Boot Joints,Parts Replacement Manifold Boot For Motorcross Dirt Bike GY6 Engine Scooter
Asin: B09VZ9ZF28 | Model: GY6QGZJ | PartNumber: GY6QGZJ | Ean: 0749212951570 | UPC: 749212951570
Easy To Install: Come With Adjustable Clamp, Quickly Installed.Before Installation, Please Measure Whether The Installation Size Of Your Motorcycle Is Suitable..
Contact Us:We Are Always Available To Help Our Customers.Please Contact Us For Replacement Or Refund If You Are Not Satisfied With The Order..
Size:Diameter Of Carburetor Connection:32Mm;Engine Side Diameter:26Mm,Total Length Approx 85Mm..
Good Sealing For Better Work Between Your Carburetor And Engine. Improves Throttle Response, Add More Horsepower..
Features
- Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation
- Good sealing for better work between your carburetor and engine. Improves throttle response, add more horsepower.
- Easy to Install: Come with adjustable clamp, quickly installed.Before installation, please measure whether the installation size of your motorcycle is suitable.
- SIZE:Diameter of carburetor connection:32mm Engine side diameter:26mm,total length approx 85mm.
- Contact us:We are always available to help our customers.Please contact us for replacement or refund if you are not satisfied with the order.
- See more on Amazon...
Brand: nibbi | Manufacturer: nibbi
See On Amazon #8
Three T 35 mm Carburetor Rubber Adapter Intake Manifold, Air Intake Pipe Adapter Boot Joint Interfacer,For MIKUNI For KEIHIN OKO KOSO PWK ZSDTRP 21mm 24mm 26mm 28mm 30mm, PE 28mm 30mm Carburetor
Asin: B0B3MM1Q64 | Model: Carburetor Adapter Interfacer | PartNumber: Carburetor Adapter Interfacer
Features: Made Of Premium Plastic And Metal Material,This Carburetor Intake Manifold Boot Is Sturdy And Oil Resistant,Good Sealing Performance, Not Easy To Aging And Abrasion Resistant,To Ensure Maximum Strength And Durability For Long Lasting Usage..
Package Included: 1 Pc.
Uses: It Holds The Carburetor And Intake Tube Attached.It Can Better Help The Carburetor To Mix A Certain Proportion Of Gasoline And Air,So That The Carburetor Can Use The Kinetic Energy Of The Inha Air To Achieve Atomization Of The Gasoline. Let Your Motorcycle Enjoy A Smooth Experience..
Material: High Quality Rubber And Aluminum Alloy.
Features
- Fitment: It can be used for 100-200cc ATV / Scooter / Dirt Bike / Go Kart, etc. Perfect For MIKUNI For KEIHIN OKO KOSO PWK ZSDTRP 21mm 24mm 26mm 28mm 30mm, PE 28mm 30mm Carburetor.
- Material: High quality rubber and aluminum alloy
- Features: Made of premium plastic and metal material,this carburetor intake manifold boot is sturdy and oil resistant,good sealing performance, not easy to aging and abrasion resistant,to ensure maximum strength and durability for long lasting usage.
- Uses: It holds the carburetor and intake tube attached.It can better help the carburetor to mix a certain proportion of gasoline and air,so that the carburetor can use the kinetic energy of the inha air to achieve atomization of the gasoline. Let your motorcycle enjoy a smooth experience.
- Package Included: 1 PC
- See more on Amazon...
Brand: Three T | Manufacturer: Three T
See On Amazon #9
MOTOKU Carburetor Rubber Intake Manifold Boot Carb Holder w/Clamp for Sportsman 335 400 450 500 ATV
Asin: B07SN8P72G | Model: 30811-64879 | PartNumber: 30811-64879 | Ean: 6972301980098
Compatible With 1996-00 Sportsman 500 (Non H.O. Models); 2000-08 Sportsman 500 6X6.
Features
- Compatible with 1999-00 Sportsman 335; 2001-14 Sportsman 400; 2006-07 Sportsman 450
- Compatible with 1996-00 Sportsman 500 (Non H.O. models); 2000-08 Sportsman 500 6x6
- See more on Amazon...
Brand: MOTOKU | Manufacturer: MOTOKU
See On Amazon #10
Dokili Dual Plane Carbureted Intake Manifold for G.M LS1 LS2 LS6 Satin Holle.y 300-130
Asin: B0B7N5SJX9
【Premium Material】Built With Natural Cast Finish Aluminum Of Superb Quality And Fit. Angles And Straightness Comparable To Factory Manifolds. It Features Optimized Runner Layout And Constant Cross Sectional Area With Best Vehicle Performance..
【Package Includes】1X Intake Manifold, Mounting Bolts & Washers, Viton O-Rings..
【Dual Plane】Dual Plane Designs Have Two Smaller Plenums That Receive Air From The Carburetor Or Throttle Body, Which Results In A Higher Velocity Through The Booster Making The Engine More Responsive To The Driver..
【Features】Dokili Intake Manifold Comes With Dual-Plane Design, Which Boosts Torque Over A Wide Rpm Range, From 1.500 To 6,500 Rpm. 4150 Square Bore Flange With Minimum Height Fits In Vehicles That Did Minimal Or No Hood Modifications..
Features
- Fitment Dokili Cast aluminum intake manifold for G. LS1 LS2 LS6 Engines, Holley 300-130.
- Features Dokili intake manifold comes with dual-plane design, which boosts torque over a wide RPM range, from 1.500 to 6,500 RPM. 4150 square bore flange with minimum height fits in vehicles that did minimal or no hood modifications.
- Premium Material Built with natural cast finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. It features Optimized runner layout and constant cross sectional area with best vehicle performance.
- Dual plane Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver.
- Package Includes 1X Intake Manifold, Mounting Bolts & Washers, Viton O-rings.
- See more on Amazon...
Brand: Dokili | Manufacturer: Dokili
Dimensions: 5.51 x 16.42 x 13.39 Inches
See On Amazon #11
TC-Motor 40mm Carburetor Carb Intake Pipe Manifold Adapter Boot Sleeve Joint For Dirt Pit Bike Motorcycle ATV
Asin: B07RGVX4FD | Ean: 0778601415027 | UPC: 778601415027
Please Carefully Check All Pictures And Sizes In The Listing To Make Sure It's The Correct Product You Need.
Reminder: The Same Model May Use The Different Parts, So Please Check Your Stock One Before Place The Order.
Package Include: 1Pc Manifold / 1Pc Bottle Opener.
40Mm Inner Diameter On Both Sides. 36Mm Total Depth. Contains Inner Ribs For An Air Tight Seal. Includes Stainless Steel Clamps..
Features
- Fitment: 40mm Carburetor Carb Intake Pipe Manifold Adapter Boot Sleeve Joint
- 40mm Inner Diameter On Both Sides. 36mm Total Depth. Contains Inner Ribs For An Air Tight Seal. Includes Stainless Steel Clamps.
- Please Carefully Check All Pictures And Sizes In The Listing To Make Sure It's The Correct Product You Need
- Package Include: 1pc Manifold / 1pc Bottle Opener
- Reminder: The Same Model May Use The Different Parts, So Please Check Your Stock One Before Place The Order
- See more on Amazon...
Brand: TC-Motor | Manufacturer: TC-Motor
See On Amazon #12
Rxmgf 35 40 45mm Motorcycle Carburetor Rubber Adapter Intake Manifold Carburetor Boot Joints for Motorcycle Carburetor (40mm)
Asin: B098D43NRV | Ean: 6094774680333
Size: 35Mm, 40Mm, 45Mm.
Package Included: 1 X Motorcycle Carburetor Adapter,Please Allow 1~2Mm Differs Due To Manual Measurement.
Please Check The Size Carefully Before Buying To Make Sure It Fits Your Vehicle.
Fits For 34Mm 36Mm 38Mm 40Mm 42Mm Carburetor.
Features
- Carburetor Adapter Intake Manifold is a great replacement for 350-600cc motorcycle, ATV, Scooter, Dirt Bike, Go Kart, etc
- Fits for 34mm 36mm 38mm 40mm 42mm Carburetor
- Size: 35mm, 40mm, 45mm
- Please check the size carefully before buying to make sure it fits your vehicle
- Package Included: 1 x Motorcycle Carburetor Adapter,Please allow 1~2mm differs due to manual measurement
- See more on Amazon...
Brand: Rxmgf | Manufacturer: Rxmgf
See On Amazon #13
2PCS Motorcycle Air Intake Manifold Boots Carburetor Adapter Inlet Intake for Minibike Dirt Bike Motorcross TTR SSR PWK 21/24/26/28/30/32/34mm PE26/28/30mm TM28/32/34 Carb Pit Dirt Bike (Black-Size A)
Asin: B0C3VJ5C6B
【Package & Tips】Comes With 2Pcs Manifold Boots,Please Carefully Check Your Manifold Boots Model If It's Applicable To Ours Before Purchasing. You Can Refer To The Size Details As Our Pics Show To Help You Make Decision..
Manifold Adapter Intake Manifold Boot.
【Excellent After-Sales Service】Any Questions About The Product, Please Feel Free To Contact Us, We Try Our Best To Solve It!.
【High Performance】Manifold Boot- Good High-Density Rubber Intake Manifold Boot With Good Sealing And High Temperature Resistance Makes It More Durable And Longer Use Time..
Features
- Compatible Models Intake manifold carburetor boots Size A fit on most MIKUNI VM24 OKO KOSO KEIHIN PWK 21/24/26/28/30mm PE26/28/30, TM28 carburetor
- High Performance Manifold Boot- Good high-density rubber intake manifold boot with good sealing and high temperature resistance makes it more durable and longer use time.
- Package & Tips Comes with 2pcs manifold boots,Please carefully check your manifold boots model if it's applicable to ours before purchasing. You can refer to the size details as our pics show to help you make decision.
- Excellent After-sales Service Any questions about the product, please feel free to contact us, we try our best to solve it!
- Manifold adapter intake manifold boot
- See more on Amazon...
Brand: ZSDTRP | Manufacturer: ZSDTRP
See On Amazon #14
MOTOKU Carburetor Intake Manifold Carb Boot Joint Holder for CRF100F XL100S XR100 XR100R Motorcycle
Asin: B07S1T2WL1 | Model: 17110-KA8-417 | PartNumber: 17110-KA8-417 | Ean: 6972301987011
Fits Honda Xr100 1981-1984.
Fits Honda Xr100r 1985-2003.
Fits Honda Xl100s 1981-1985.
Features
- Fits Honda CRF100F 2004-2013
- Fits Honda XL100S 1981-1985
- Fits Honda XR100 1981-1984
- Fits Honda XR100R 1985-2003
- See more on Amazon...
Brand: MOTOKU | Manufacturer: MOTOKU
See On Amazon #15
Dokili Single Plane Carb Intake Manifold for G.M LS1 LS2 LS6 Black 300-132
Asin: B0B7MKS6JD
【Features】4150 Square Bore Flange With Minimum Height Fits In Vehicles That Did Minimal Or No Modifications. This Manifold Is For Centrifugal Blower/Turbocharged/Nos Power Adder Apps..
【Package Includes】1X Intake Manifold, Mounting Bolts & Washers, Viton O-Rings..
【Premium Material】Built With Black Coated Cast Aluminum Of Superb Quality And Fit, This Intake Is Corrosion Resistant And Durable. Angles And Straightness Comparable To Factory Manifolds..
【Advantages】Dokili Intake Manifold Comes With Single-Plane Design With A Wide Rpm Range From 2.500 To 7,500 Rpm. It Features Optimized Runner Layout And Constant Cross Sectional Area With Best Vehicle Performance..
Features
- Fitment Dokili aluminum intake manifold for G. LS1 LS2 LS6 Engines, H.olley 300-132.
- Advantages Dokili intake manifold comes with single-plane design with a wide RPM range from 2.500 to 7,500 RPM. It features Optimized runner layout and constant cross sectional area with best vehicle performance.
- Features 4150 square bore flange with minimum height fits in vehicles that did minimal or no modifications. This manifold is for centrifugal blower/turbocharged/NOS power adder apps.
- Premium Material Built with black coated cast aluminum of superb quality and fit, this intake is Corrosion resistant and durable. Angles and straightness comparable to factory manifolds.
- Package Includes 1X Intake Manifold, Mounting Bolts & Washers, Viton O-rings.
- See more on Amazon...
Brand: Dokili | Manufacturer: Dokili
Dimensions: 4.72 x 16.34 x 13.19 Inches
See On Amazon #16
MRELC Intake Manifold Carburetor Boot Compatible with Yamaha TTR SSR 125CC Minibike Dirt Bike Motorcross
Asin: B08QCG3R22 | Ean: 0616430432078 | UPC: 616430432078
Size:Diameter Of Carburetor Connection:33Cm;Engine Side Diameter:28Mm.
Package Includes: 1X Intake Manifold, 2X Gaskets..
Replace Your Old Cracked And Broken Intake Boot. Perfectly Connects The Carburetor And The Engine, Provides New Power For Better Operation.
Features
- Racing Parts Motorcycle 125CC 33mm Carburetor Adapter Intake Manifold Carburetor Adapter Boot Compatible with YAMAHA Minibike Dirt Bike Motorcross TTR SSR
- Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation
- SIZE:Diameter of carburetor connection:33cm Engine side diameter:28mm
- Package includes: 1x Intake Manifold 2x gaskets.
- See more on Amazon...
Brand: MRELC | Manufacturer: MRELC
Dimensions: 0.87 x 2.36 x 1.97 Inches
See On Amazon #17
SecosAutoparts Intake Manifold Boot Compatible with Honda XR 100R CRF 100F 1981-2013 Replaces# 17110-KA8-000
Asin: B096XBJFGK | Ean: 0755340748890 | UPC: 755340748890
Please Read The Product Parameter Description Carefully Before Buying To Ensure That The Product Is Suitable For Your Equipment, And Double Check!Reduce The Occurrence Of Errors!.
We Serve You 24 Hours A Day. After You Receive The Product, If There Is Any Problem, Please Send Us An Email In Time, We Will Get In Touch With You As Soon As Possible!.
Package Included: 1X Intake Manifold Boot.
Fit For:Compatible With Honda Xr 100R Crf 100F 1981-2013.
Features
- Excellent workmanship and strict inspection before leaving the factory are necessary conditions for product reliability, stability and long-term use. All products have been tested on the machine before leaving the factory. We will check the products again before shipping for you!
- Fit for Compatible with Honda XR 100R CRF 100F 1981-2013
- Please read the product parameter description carefully before buying to ensure that the product is suitable for your equipment, and double check!Reduce the occurrence of errors!
- Package Included: 1x Intake Manifold Boot
- We serve you 24 hours a day. After you receive the product, if there is any problem, please send us an email in time, we will get in touch with you as soon as possible!
- See more on Amazon...
Brand: SecosAutoparts | Manufacturer: SecosAutoparts
See On Amazon #18
Rxmgf 35 40 45mm Carburetor Intake Pipe Manifold Adapter Boot Joint For Dirt Pit Bike Motorcycle(45mm/Red)
Asin: B09KNFJXXZ | Ean: 6094774681521
Size: 35Mm, 40Mm, 45Mm.
Package Included: 1 X Motorcycle Carburetor Adapter,Please Allow 1~2Mm Differs Due To Manual Measurement.
Please Check The Size Carefully Before Buying To Make Sure It Fits Your Vehicle.
Fits For 34Mm 36Mm 38Mm 40Mm 42Mm Carburetor.
Features
- Carburetor Adapter Intake Manifold is a great replacement for 350-600cc motorcycle, ATV, Scooter, Dirt Bike, Go Kart, etc
- Fits for 34mm 36mm 38mm 40mm 42mm Carburetor
- Size: 35mm, 40mm, 45mm
- Please check the size carefully before buying to make sure it fits your vehicle
- Package Included: 1 x Motorcycle Carburetor Adapter,Please allow 1~2mm differs due to manual measurement
- See more on Amazon...
Brand: Rxmgf | Manufacturer: Rxmgf
See On Amazon #19
DELUXEMOTO PWK 32mm 34m Carburetor Intake Manifold Adapter Carb Pipe Boot ATV Dirt Bike
Asin: B0CDF9N9J4 | Model: TC953-BLACK | PartNumber: TC953-BLACK | Ean: 0713830288509 | UPC: 713830288509
Easy To Install, Perfect Match To The Stock Carburetor..
Size: Please Check The Size On The Pictures. Thank You.
Note: Please Compare Our Product Against Yours, Including Its Appearance, Size, Shape Before Ordering. Thank You..
Fitment: Fit For Pwk 32Mm 34Mm Carburetor Atv Motorcycle Dirt Bike Quad Scooter, Etc..
Made Of Premium Materials With Exquisite Craft For Strong Strength And Long Durability..
Features
- Direct replacement for your old or broken intake boot flange.
- Made of premium materials with exquisite craft for strong strength and long durability.
- Easy to install, perfect match to the stock carburetor.
- Fitment: fit for PWK 32mm 34mm Carburetor ATV Motorcycle Dirt Bike Quad Scooter, etc.
- Size: Please check the size on the pictures. Thank you
- NOTE: Please Compare Our Product Against Yours, Including Its Appearance, Size, Shape Before Ordering. Thank You.
- See more on Amazon...
Brand: Generic | Manufacturer: DELUXEGAIN
Dimensions: 2.00 x 4.00 x 2.00 Inches
Warranty: 90 Day Manufacturer
See On Amazon
Looking For Something Else?
Search