Nxtop 1.5MM Carbide End Milling Cutter,CNC Router Bits, End Mill for PCB Machine Pack of 10
Asin: B07DKXTCC2 | Ean: 0703064791562 | UPC: 703064791562
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.These Engraving Bits Have Sufficient Flexural Strength And Wear Resistance.
Verified Brand:Nxtop.
Milling, Hole And Plate Edge, Surface Clean, Tidy, No Burr.
Cutting Edge Diameter: 1.5Mm.
Features
- Shank diameter: 3.175mm /0.125 inch
- Cutting edge diameter: 1.5mm
- These Engraving bits have sufficient flexural strength and wear resistance
- Milling, hole and plate edge, surface clean, tidy, no burr
- Verified Brand:Nxtop
- See more on Amazon...
Brand: Nxtop | Manufacturer: Nxtop
See On Amazon Similar To Nxtop 1.5MM Carbide End Milling
#1
uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood
Asin: B07KFV4R31 | Model: a18092800ux0251 | PartNumber: a18092800ux0251
Spiral & Sharp Router Bits: Large Chip Space Design For Fast And Clean Chip Removal. Spiral Sharp Cutting Edges Provide Smooth Cuts And No Burrs For Increased Efficiency, Not Easy To Stick, Precision Ground..
Tips: Upcut Milling Bits Can Direct Chips Up And Away From The Milling Area, Leaving An Unobstructed Path To Prevent Tool Breakage And Extends The Tool Life. Properly Reduce The Cutting Speed And Feed Rate To Prolong The Service Life..
Carbide End Mills: Tungsten Carbide Has Good Wear Resistance, High Strength And Resistance To Cutting Temperatures. Carbide Can Run At Higher Speed Than High-Speed Steel. Chamfered Shank For Ease Of Use.
Wide Applications: Cnc Router Bits Are Suitable For Acrylic, Pvc, Wood, Nylon, Resin, Abs, Mdf, Plywood, Hardwood. Good For 2D Sculpturing, Cutting, Engraving, Slotting, Milling, Etc. Works With Milling And Engraving Machines..
Features
- 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8"; Cutting Diameter: 1.5mm / 0.06"; Cutting Length: 12mm / 0.47"; Overall Length: 38mm / 1.5"; Number of Flutes: 2 Flutes
- Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines.
- Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground.
- Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use
- Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.15 x 2.36 inches
See On Amazon #2
HQMaster Downcut Bit 1/8" Shank Down Cut Spiral CNC Router Bits End Mill Tungsten Carbide Milling Cutter Set 5 Pack (1.5mm)
Asin: B0BQLJQH7B | Model: HQ-60073747576 | PartNumber: HQ-60073747576
5Pcs Downcut Double Flute Spiral Cnc Bit: Ideal For Carving/Cutting/Engraving/Milling/Slotting/Sculpturing In Materials Like Mdf, Abs, Pvc, Acrylic, Nylon, Resin, Plastics, Density Board, Wood, Plywood, Hardwood Etc. Widely Used For Cnc Engraving, Milling, Roughing, Hollowing, 3D Sculpturing Purposes.
High Quality: Industrial Quality Control To Ensure Best Performance. Suitable For Most Cnc Engraving Machine.
Clean Cut & Excellent Edge-Grinding: The Design Of Flutes, Larger Spiral Chip Space Of Cnc Router Bit Makes Non-Stick Crumbs, Smokeless, Odorless And Silent During Processing, Smooth Cutting And Fast Chip-Removal.
Downcut Bits Dimension: 1/8" Shank (3.175Mm). Cutting Edge Diameter: 1.5Mm , Cutting Edge Length/Flute Length: 12Mm, Overall Length:40Mm.
Features
- Material: Solid Tungsten carbide. Durable and sturdy and wear resistant.
- Downcut Bits Dimension: 1/8 Shank (3.175mm). Cutting edge diameter: 1.5mm , Cutting edge length/flute length: 12mm, Overall length:40mm
- 5pcs Downcut Double Flute Spiral CNC Bit: Ideal For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
- Clean Cut & Excellent Edge-Grinding: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smokeless, odorless and silent during processing, smooth cutting and fast chip-removal
- High Quality: Industrial quality control to ensure best performance. Suitable for most CNC engraving machine
- See more on Amazon...
Brand: HQMaster | Manufacturer: HQMaster
See On Amazon #3
uxcell 10Pcs 1mm Titanium Coat Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07R55D6RN | Model: a19031400ux0498 | PartNumber: a19031400ux0498
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon Board. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- STANDARD: Cutting edge diameter: 1mm / 0.039"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 7mm / 0.28"
- MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 1.50 x 0.12 inches
See On Amazon #4
HOZLY 10Pcs 1/8'' Shank 1.5mm Titanium Coat Carbide End Mill Engraving Bits CNC Rotary Burrs Tool for PCB Mould Plastic Fiber Carbon Fiber Hardwood
Asin: B073TXTFXR | Model: 302015085 | PartNumber: 302015085 | Ean: 0727670343199 | UPC: 727670343199
High Quality Material: Using High Quality Grained Carbide Material, Providing Good Milling And Cutting Performance..
Industrial Quality Control To Ensure Best Performance.
Highly Precision: Sharp Cutting Edge, Milling, Hole And Plate Edge, Clean Surface, Neat, No Glitches..
Titanium Coat Carbide Hard Steel: With Sufficient Flexural Strength And Wear Resistance, Ensuring High Work Efficiency..
Features
- Wide Compatibility: Works with PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing.
- Titanium Coat Carbide Hard Steel: With sufficient flexural strength and wear resistance, ensuring high work efficiency.
- High Quality Material: Using high quality grained carbide material, providing good milling and cutting performance.
- Highly precision: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Industrial quality control to ensure best performance
- See more on Amazon...
Brand: HOZLY | Manufacturer: HOZLY
See On Amazon #5
SPEED TIGER Carbide Corner Radius End Mill - 4 Flute - IPVR1T1/4"0.03"4 (1 Piece, R0.03, 1/4") - Unequal Flute Spacing & Helix Design - for Titanium - Mill Bits Sets for DIYers & Professionals
Asin: B07FT9145Y | Model: IPVR1T1-4-003-4T | PartNumber: IPVR1T1-4-003-4T | Ean: 4712805504435
✅ High-Performance Material - Crafted From Micrograin Carbide, This End Mill Offers Exceptional Toughness, Durability, And Machinability, Delivering Outstanding Performance And Great Value For Its Price..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Distinctive Design - Our Product Delivers High Performance, Firm Edges, Anti-Vibration, Less Chatter, Reduced Burring, And Stable Machining For Difficult-To-Cut Materials..
✅ Multi-Size - No Matter What Project You Are Working On, You Can Find The Right Size Drill Bits In Our Products To Work Better. (1/4", 5/16", 3/8", 1/2", And 5/8").
Features
- APPLICATION - Our carbide tools are highly effective for working with Titanium, Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~45), and Cast Iron.
- MULTI-SIZE - No matter what project you are working on, you can find the right size drill bits in our products to work better. (1/4, 5/16, 3/8, 1/2, and 5/8)
- HIGH-PERFORMANCE MATERIAL - Crafted from micrograin carbide, this end mill offers exceptional toughness, durability, and machinability, delivering outstanding performance and great value for its price.
- DISTINCTIVE DESIGN - Our product delivers high performance, firm edges, anti-vibration, less chatter, reduced burring, and stable machining for difficult-to-cut materials.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
See On Amazon #6
uxcell Square Nose End Mill, 1mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 4 Flute Spiral Milling Cutter HRC45 with 4mm Shank 50mm (2-inch) Length, 2pcs
Asin: B09T3N6WHD | Model: a22010500ux0268 | PartNumber: a22010500ux0268
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Etc. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 4-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: P05 Carbide End Mill Cutter Is High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance, Ensures High Work Efficiency. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 1mm / 0.04"; cutting flute length: 3mm / 0.12"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC45; spiral angle: 35 degree.
- Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 4-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
Nxtop 10Pcs 2mm Titanium Coat Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07VD457HR | Model: XD1 | PartNumber: XD1 | Ean: 0745672480520 | UPC: 745672480520
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon And Environmental Board..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- Standrd: Cutting edge diameter: 2mm / 0.079"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 11.5mm / 0.45"
- Material: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- Features: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- Characteristics: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
- Application: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon and environmental board.
- See more on Amazon...
Brand: Nxtop | Manufacturer: Nxtop
See On Amazon #8
uxcell 5PCS 1/8" Shank 1.5mm x 8mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood
Asin: B07KFTCH88 | Model: a18092800ux0250 | PartNumber: a18092800ux0250
Spiral & Sharp Router Bits: Large Chip Space Design For Fast And Clean Chip Removal. Spiral Sharp Cutting Edges Provide Smooth Cuts And No Burrs For Increased Efficiency, Not Easy To Stick, Precision Ground..
Tips: Upcut Milling Bits Can Direct Chips Up And Away From The Milling Area, Leaving An Unobstructed Path To Prevent Tool Breakage And Extends The Tool Life. Properly Reduce The Cutting Speed And Feed Rate To Prolong The Service Life..
Carbide End Mills: Tungsten Carbide Has Good Wear Resistance, High Strength And Resistance To Cutting Temperatures. Carbide Can Run At Higher Speed Than High-Speed Steel. Chamfered Shank For Ease Of Use.
Wide Applications: Cnc Router Bits Are Suitable For Acrylic, Pvc, Wood, Nylon, Resin, Abs, Mdf, Plywood, Hardwood. Good For 2D Sculpturing, Cutting, Engraving, Slotting, Milling, Etc. Works With Milling And Engraving Machines..
Features
- 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8"; Cutting Diameter: 1.5mm / 0.06"; Cutting Length: 8mm / 0.31"; Overall Length: 38mm / 1.5"; Number of Flutes: 2 Flutes
- Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines.
- Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground.
- Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use
- Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.15 x 2.36 inches
See On Amazon #9
HQMaster 10-Pack End Mill Milling Cutter 1.5mm Cutting Dia. Spiral Router Bits CNC Bits 1-Flute Single Edged Cutting Engraving Bits Tungsten Steel 6mm Flute Length, 38.5mm OAL
Asin: B07FT2LXF9 | Model: HQ-5367 | PartNumber: HQ-5367
Cutting Edge Length(Cel)/ Length: 6Mm.
Material: Tungsten Steel; Quantity: Pack Of 10 (Coming With Storage Case).
Overall Length/Total Length: 38.5Mm.
Cutting Edge Diameter (Ced): 1.5Mm.
Features
- Number of flutes: 1; Shank diameter (SD): 1/8"(3.175mm) approx.
- Cutting edge diameter (CED): 1.5mm
- Cutting edge length(CEL)/ Length: 6mm
- Overall length/Total Length: 38.5mm
- Material: tungsten steel; Quantity: Pack of 10 (coming with storage case)
- See more on Amazon...
Brand: HQMaster | Manufacturer: HQMaster
Dimensions: 0.35 x 2.17 x 2.01 inches | Weight: 1.00 pounds
See On Amazon #10
uxcell 10Pcs 1.3mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07R9HQMVW | Model: a19031400ux0488 | PartNumber: a19031400ux0488
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon Board. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- STANDARD: Cutting edge diameter: 1.3mm / 0.05"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 8mm / 0.31"
- MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
Nxtop 10Pcs 1.6mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07VPPKQQ8 | Ean: 0745672480575 | UPC: 745672480575
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon And Environmental Board..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- Standrd: Cutting edge diameter: 1.6mm / 0.063"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 8.5mm / 0.33"
- Material: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- Features: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- Characteristics: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
- Application: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon and environmental board.
- See more on Amazon...
Brand: Nxtop | Manufacturer: Nxtop
See On Amazon #12
uxcell Square Nose End Mill, 1.5mm Solid Carbide AlTiSin Coated Long Reach CNC Router Bits 2 Flutes Milling Cutter with Extended Neck, 20mm Cutting Length 4mm Shank
Asin: B0B1ZHWC8G | Model: a22032600ux0217 | PartNumber: a22032600ux0217
Solid Carbide: Made Of Super Fine Grain Carbide, It Has High Hardness (Hrc92), High Strength, And Wear Resistance. With Good Milling And Cutting Performance, Carbide Can Run At Higher Speed Than High-Speed Steel. The Passivation Treatment Greatly Increases Corrosion Resistance And Wear Resistance..
Tips: Use On Cnc Machining Centers, Cnc Machine Tools, Precision Engraving Machines And Other Equipment. The Longer The Length Of The Tool Clamped By The Chuck, The Better. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Features: Features Square End Cut, 2-Flute Design, Large And Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. The Altisin Composite Coating Has High Hardness, High Wear Resistance And High Thermal Stability..
Wide Applications: Suitable For Cutting Stainless Steel, Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Tool Steel Etc. The End Mill Has An Extended Neck (Long Reach) That Provides Additional Reach And Clearance For Machining Deep Or Hard-To-Reach Areas..
Features
- End Mill: Cutting Diameter: 1.5mm / 0.059"; effective cutting length: 20mm / 0.79"; cutting edge length: 4mm / 0.16"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC60. Used for groove machining, side milling and finishing.
- Wide Applications: Suitable for cutting stainless steel, carbon steel, malleable cast iron, alloy steel, die steel, tool steel etc. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas.
- Solid Carbide: Made of super fine grain carbide, it has high hardness (HRC92), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.
- Features: Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
- Tips: Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
Rannb End Mill 1.5" Cutting Dia 0.8" Shank Dia Straight Shank 4 Flute Drill Bits Cutter Tool
Asin: B0BC1CGR9B | Model: wby2901 | PartNumber: wby2901
【Good Design】 Large Front Angle Effectively Reduces Cutting Resistance, Sharp And Durable, Convenient For Chip Removal, Further Improve Machining Efficiency..
【Suitable For Multiple Material】Suitable For Side Milling, End Milling, Finish Machining In Carbon Steel, Alloy Steel, Die Steel, Tool Steel, Cast Iron, And Titanium..
【Heat Treatment Process】The High Hardness Steel Go Through The Heat Treatment Process. Reduce Changing Times And Improve The Production Efficiency..
【Dimension】Cutting Dia:1.5"/38Mm; Flute Length:2.36"/60Mm; Shank Dia:0.8"/20Mm;Total Length:5.1"/130Mm.
Features
- Material The end mill drill bits is made of High Speed Steel which features with high hardness,good wear resistance and durability.
- Dimension Cutting Dia:1.5/38mm; Flute Length:2.36/60mm; Shank Dia:0.8/20mm;Total Length:5.1/130mm
- Good Design Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
- Heat Treatment Process The High Hardness Steel go through the heat treatment process. Reduce changing times and improve the production efficiency.
- Suitable for Multiple Material Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.
- See more on Amazon...
Brand: Rannb | Manufacturer: Rannb
See On Amazon #14
TargetEvo 6pcs 1mm 1.5mm 2mm 2.5mm 3.5mm 4mm CNC Lathe Milling Cutters End Mill Cutters Drill Bits Set 4 Flutes Tungsten Carbide Endmills for Wood Aluminum Steel Titanium
Asin: B075SXZ16L | Model: 178pla0680TL51-01 | PartNumber: 178pla0680TL51-01 | Ean: 5693961974029
Material: Tungsten Carbide, For The Needs Of All Aspects Of Milling.
Package: 6Pcs (1Mm + 1.5Mm + 2Mm + 2.5Mm + 3.5Mm + 4Mm).
Has A Good Milling And Cutting Performance, Guarantee The High Efficiency Of The Work.
4 Flutes. Max Cutting Material Hardness: Hrc45.
Features
- Designed For CNC, drilling machine, engraving machine, aluminum, metel, wood processing, alloy steel, stainless steel, etc
- 4 Flutes. Max cutting material hardness: HRC45
- Material: Tungsten Carbide, for the needs of all aspects of milling
- Has a good milling and cutting performance, guarantee the high efficiency of the work
- Package: 6pcs (1mm + 1.5mm + 2mm + 2.5mm + 3.5mm + 4mm)
- See more on Amazon...
Brand: TargetEvo | Manufacturer: TargetEvo
See On Amazon #15
JIUWU 1.5MM Carbide End Milling Cutter,CNC Router Bits, End Mill for PCB Machine Pack of 10
Asin: B00SMDPF4I | Model: ZTD0054 | PartNumber: ZTD0054 | Ean: 7241870958890, 0701304998764 | UPC: 701304998764
High Performance Material: 1/8 Carbide Drill Bits Are Made Of Particulate Carbide With Sufficient Flexural Strength, Wear Resistance, Toughness, Durability And Machinability.These Engraving Bits Have Sufficient Flexural Strength And Wear Resistance.
This Milling Bits Will Be A Good Helper In Your Life And Work, Perfect For Daily Work And Life, An Indispensable Engraving Tool..
Wide Applications: Drill Bits For Stainless Steel Can Engrave Pcb, Cnc, Circuit Boards, Metals, Plastics, Wood, Smt, Fiberglass, Carbon Boards And Eco-Friendly Boards, Which Is A Good Choice For Both Machinist Tools And Woodworking, Or Home Tools..
Excellent Craftsmanship: This Carbide Drill Bits Shank Diameter: 3.14 Mm/0.125 Inches Blade Diameter: 1.5 Mm; Milling, Holes And Plate Edges With Clean, Neat Surfaces And Excellent High Precision, Burr-Free Enables Users To Get Professional Engraving Quality Effortlessly..
Features
- Much Quantity: You will get 10 end mill bits in one purchase, which can be used for quite a long time and is cost-effective.
- Excellent Craftsmanship: This carbide drill bits shank diameter: 3.14 mm/0.125 inches blade diameter: 1.5 mm; milling, holes and plate edges with clean, neat surfaces and excellent high precision, burr-free enables users to get professional engraving quality effortlessly.
- High Performance Material: 1/8 carbide drill bits are made of particulate carbide with sufficient flexural strength, wear resistance, toughness, durability and machinability.These Engraving bits have sufficient flexural strength and wear resistance
- Wide Applications: Drill bits for stainless steel can engrave pcb, cnc, circuit boards, metals, plastics, wood, smt, fiberglass, carbon boards and eco-friendly boards, which is a good choice for both machinist tools and woodworking, or home tools.
- This milling bits will be a good helper in your life and work, perfect for daily work and life, an indispensable engraving tool.
- See more on Amazon...
Brand: JIUWU | Manufacturer: JiuWu
See On Amazon #16
uxcell Ball Nose End Mill 1.5mm Tip Radius Solid Carbide AlTiSin Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC45 with 4mm Shank 50mm (2-inch) Length
Asin: B09T3J2Y2Y | Model: a22010500ux0245 | PartNumber: a22010500ux0245
Wide Applications: Suitable For Milling And Cutting Of Carbon Steel, Malleable Cast Iron, Alloy Steel, Stainless Steel, Etc. For Slot And Hole Machining. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Ball End Cut, 2-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. The Altisin Composite Coating Has High Hardness, High Wear Resistance And High Thermal Stability..
Solid Carbide Tool: P05 Carbide End Mill Cutter Is High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance, Ensures High Work Efficiency. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Ball Nose End Mill: Cutting radius: 1.5mm / 0.06"; cutting dia.: 3mm / 0.12"; cutting flute length: 6mm / 0.24"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC45.
- Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for milling and cutting of carbon steel, malleable cast iron, alloy steel, stainless steel, etc. For slot and hole machining. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Ball end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Square Nose End Mill, 1mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC45 with 4mm Shank 50mm (2-inch) Length, 2pcs
Asin: B09T3PQMMB | Model: a22010500ux0319 | PartNumber: a22010500ux0319
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Etc. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 2-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: P05 Carbide End Mill Cutter Is High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance, Ensures High Work Efficiency. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 1mm / 0.04"; cutting flute length: 3mm / 0.12"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC45; spiral angle: 35 degree.
- Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
OSCARBIDE12mm Square Corners Carbide Inserts (12X12mmX1.5mm-35 Degree Cutting Angle) 4 Edges Replacement Cutter for CNC Spoilboard Surfacing Router Bit Wood Turning Tools,10 Pieces
Asin: B09WMR3SP6 | Model: CI | PartNumber: CI | Ean: 0766415074189 | UPC: 766415074189
Easy To Operate,Each Blade Has 4 Sharp Edges,If One Is Dull, Just Change It To The Other Side, 4 Times Life Than The Normal Router Bit . Used On Soft And Hard Woods, Particle Board, Mdf, Plywood Compact Panel, Laminate, Acrylic Etc..
10 Pieces Per Box,Packed With A Plastic Container For Safe And Easy Storage.
Replacement Carbide Tips Fits For Cnc Spoilboard Surfacing Router Bit, Slab Flattening Router Planer Bit, Spiral/Helical Planer Cutter Heads, Wood Turning Tools.
Made Of Solid Tungsten Carbide,Own Longer Use Life,Sharp And Durable.
Features
- Carbide inserts Size :12mm length,12mm width,1.5mm thickness,4-indexable cutting edge, 35 Cutting Angle
- Made of solid tungsten carbide,own longer use life,sharp and durable
- Easy to operate,each blade has 4 sharp edges,if one is dull, just change it to the other side, 4 times life than the normal router bit . Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic etc.
- Replacement carbide tips Fits for CNC Spoilboard Surfacing Router Bit, Slab Flattening Router Planer Bit, Spiral/Helical Planer Cutter Heads, Wood Turning Tools
- 10 pieces per box,packed with a plastic container for safe and easy storage
- See more on Amazon...
Brand: OSCARBIDE | Manufacturer: OSCARBIDE TOOLS
Dimensions: 0.06 x 0.47 x 0.47 inches
See On Amazon #19
uxcell 10 Pcs Tungsten Carbide CNC PCB End Mill 3.175 Shank 1.0mm Cutting Dia (Pack of 10)
Asin: B00REGXZZA | Model: a14091600ux0695 | PartNumber: a14091600ux0695 | Ean: 0702105918944 | UPC: 702105918944
Shank Diameter : 3.175Mm / 0.13"/1/8";Overall Length(Ovl) : 38Mm / 1.5".
Package Content : 10 X Pcb Cutter End Mill1 X Plastic Case. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Mill Cutter Color : Silver Tone;Weight : 52G. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Cutting Edge Diameter(Ced) : 1.0Mm / 0.063";Cutting Depth : 7Mm / 0.28".
Features
- Product Name : PCB Cutter End Mill;Material : Tungsten Carbide
- Cutting Edge Diameter(CED) : 1.0mm / 0.063;Cutting Depth : 7mm / 0.28
- Shank Diameter : 3.175mm / 0.13/1/8;Overall Length(OVL) : 38mm / 1.5
- Mill Cutter Color : Silver Tone;Weight : 52g. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- Package Content : 10 x PCB Cutter End Mill1 x Plastic Case. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
First Available: 08/20/2018
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #20
uxcell End Mill CNC Router Bits, 1.5mm x 8.5mm 1/8" Shank Diamond Film Coated Carbide Engraving Bit Milling Cutter Right Hand for PCB Plastic Fiber Wood 5pcs
Asin: B0B2J76H7W | Model: a22031800ux0041 | PartNumber: a22031800ux0041
Carbide Tools G05 Tungsten Carbide Tools Has High Hardness (Hrc94.5), Wear Resistance, Good Toughness And Heat Resistance. With Good Milling And Cutting Performance, Carbide Material Can Ensure High Work Efficiency. Carbide Can Run At Higher Speed Than High-Speed Steel..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Special Coating: Processed By Cvd (Chemical Vapor Deposition), The Diamond Film Coating Is Very Close To Natural Diamond, With High Hardness, High Elastic Modulus, High Thermal Conductivity, Good Self-Lubrication And Chemical Stability..
Wide Applications: Suitable For Engraving And Milling Printed Circuit Boards, Pcb, Mdf, Abs, Pvc, Acrylic, Nylon, Plastic, Wood, Fiber Glass, Carbon Fiber, Density Board, Plasterboard, Etc. Use On Cnc Machining Centers, Machine Tools, Precision Engraving Machines And Other Equipment..
Features
- End Mills: Cutting edge diameter: 1.5mm / 0.059"; shank diameter: 3.175mm / 1/8"; cutting edge length: 8.5mm / 0.335"; overall length: 38mm / 1-1/2"; milling direction: right hand; style: corn shape. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc. Use on CNC machining centers, machine tools, precision engraving machines and other equipment.
- Carbide Tools G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency. Carbide can run at higher speed than high-speed steel.
- Special Coating: Processed by CVD (chemical vapor deposition), the diamond film coating is very close to natural diamond, with high hardness, high elastic modulus, high thermal conductivity, good self-lubrication and chemical stability.
- Tips: The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search