Taidacent Non Contact Liquid Level Sensor Contactless Water Tank Water Level Sensor for Tank Water Level Control with Low and High Level Output
Asin: B07FC5RGC7 | Model: Y25-V | PartNumber: Y25-V | Ean: 0702004746242 | UPC: 702004746242
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
You Can Adjust Sensitivity: Remove The Plastic Cover Of The Sensors And Turn The Very Small Screw, Clockwise Decrease Sensitivity, Counter Clockwise To Increase The Sensitivity..
High And Low Level Output: If There Is Induction, The Output Is High Level; No Induction, The Output Is Low Level. Specially Designed For Non-Metallic Pipe Liquid Level Detection.
The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- High and low level output: If there is induction, the output is high level; no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection
- You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
See On Amazon Similar To Taidacent Non Contact Liquid Level
#1
Taidacent Non Contact Liquid Level Sensor Contactless Water Level Sensor Externally Attached Pipe Water Float Switch NPN Output Capacitive
Asin: B07FC79MLW | Model: Y26-NPN | PartNumber: Y26-NPN | Ean: 0702004746211 | UPC: 702004746211
The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
Npn Output: If There Is Induction, The Output Is Low Level; No Induction, Disconnected.
The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
The Liquid Level Sensor (Probe) Is Installed Above And Below The Outer Wall Of The Container To Be Tested (The High And Low Positions Of The Liquid Level). The Non-Metallic Container Does Not Need To Be Opened, And The Installation Is Simple And Does Not Affect The Production..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- NPN output: If there is induction, the output is low level; no induction, disconnected
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
See On Amazon #2
Taidacent Non-Contact Liquid Level Sensor Externally Attached Liquid Induction Level Switch Water Level Switch (NPN Output(5-12V))
Asin: B07QKRCJ3H | Model: Y25-1904 | PartNumber: Y25-1904
High Stability, High Sensitivity, Strong Interference Capability, Free From External Electromagnetic Interference, Special Treatment For Power Frequency Interference And Common Mode Interference, To Be Compatible With All 5~24V Power Adapters On The Market..
Open Collector Output Mode, Wide Voltage Range (5~24V), Suitable For Connecting Various Circuits And Product Applications..
Strong Compatibility, Through A Variety Of Non-Metallic Containers, Such As Plastic, Glass, Ceramics And Other Containers, The Sensing Distance Can Reach 20Mm; Liquid, Powder, Particles Can Be Detected..
The Liquid Level Sensor Has Intelligent Liquid Level Reference Adjustment And Liquid Level Memory Function, Liquid Level Status Display Mode, Which Can Realize Multi-Point Series Connection; Can Support High And Low Level Output, Npn, Pnp Signal Output And Rs485 Communication Interface Output ;Open Collector Output Mode, Wide Voltage Range (5~24V), Suitable For Connecting Various Circuits And Product Applications(Please Choose The Appropriate Model For Your Usage)..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level sensor has intelligent liquid level reference adjustment and liquid level memory function, liquid level status display mode, which can realize multi-point series connection; can support high and low level output, NPN, PNP signal output and RS485 communication interface output ;Open collector output mode, wide voltage range (5~24V), suitable for connecting various circuits and product applications(Please Choose the appropriate model for your usage).
- High stability, high sensitivity, strong interference capability, free from external electromagnetic interference, special treatment for power frequency interference and common mode interference, to be compatible with all 5~24V power adapters on the market.
- Strong compatibility, through a variety of non-metallic containers, such as plastic, glass, ceramics and other containers, the sensing distance can reach 20mm; liquid, powder, particles can be detected.
- Open collector output mode, wide voltage range (5~24V), suitable for connecting various circuits and product applications.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida Century Technology
See On Amazon #3
Taidacent Automatic Water Level Controller Water Pump Controller Water Tank Automatic Filling System Either to Fill or Empty a Tank Two Non Contact Water Tank Water Level Sensors 1 Meter Cable
Asin: B07RD7Y39P | Model: TD-DJL-2Y | PartNumber: TD-DJL-2Y
Relay Dry Contact Output, Can Be Applied To A Variety Of Load..
You Can Adjust Sensitivity: Remove The Plastic Cover Of The Sensors And Turn The Very Small Screw, Clockwise Decrease Sensitivity, Counter Clockwise To Increase The Sensitivity..
Control Diversification, Can Control The Pump In Manual Or Automatic Mode..
Ac95 ~ 265V Wide Voltage Power Supply..
Features
- When the liquid level of the container is too low, the low liquid level alarm signal from the low liquid level sensor is triggered to trigger the controller to close the relay to start the water pump to add liquid level. When the liquid level reaches a certain height, the high liquid level sensor sends a signal to trigger the controller to disconnect the relay to automatically stop the water pump. You can use the controller to either to fill or empty a tank
- AC95 ~ 265V wide voltage power supply.
- Relay dry contact output, can be applied to a variety of load.
- Control diversification, can control the pump in manual or automatic mode.
- You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida Century Technology
Dimensions: 0.00 x 4.53 x 0.00 Inches
See On Amazon #4
Gravity: Non-Contact Digital Water/Liquid Level Sensor
Asin: B08JPNY5KJ | Model: SEN0204 | PartNumber: SEN0204 | Ean: 6959420910229
There Are No Special Requirements For The Liquid Or Container And This Liquid Sensor Is Easy To Use And Easy To Install..
The Liquid Level Sensor Is Equipped With An Interface Adapter That Makes It Compatible With Dfrobot "Gravity" Interface. Four Levels Of Sensitivity Can Be Configured By Pressing The Set Button..
No Contact With Liquid Makes The Module Suitable For Hazardous Applications Such As Detecting Toxic Substances, Strong Acid, Strong Alkali, And All Kinds Of Liquid In An Airtight Container Under High Pressure..
Features
- This is a non-contact water / liquid level sensor. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection.
- No contact with liquid makes the module suitable for hazardous applications such as detecting toxic substances, strong acid, strong alkali, and all kinds of liquid in an airtight container under high pressure.
- There are no special requirements for the liquid or container and this liquid sensor is easy to use and easy to install.
- The liquid level sensor is equipped with an interface adapter that makes it compatible with DFRobot Gravity interface. Four levels of sensitivity can be configured by pressing the SET button.
- See more on Amazon...
Brand: DFROBOT | Manufacturer: DFROBOT
Weight: 0.02 Pounds
See On Amazon #5
Taidacent Non Contact Water Level Sensor Flow Sensor Float Switch Water Level Switch High and Low Level Output
Asin: B07FC8K28F | Model: Y26-V | PartNumber: Y26-V | Ean: 0702004746235 | UPC: 702004746235
The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
High And Low Level Output: If There Is Induction, The Output Is High Level; No Induction, The Output Is Low Level. Specially Designed For Non-Metallic Pipe Liquid Level Detection.
The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
The Liquid Level Sensor (Probe) Is Installed Above And Below The Outer Wall Of The Container To Be Tested (The High And Low Positions Of The Liquid Level). The Non-Metallic Container Does Not Need To Be Opened, And The Installation Is Simple And Does Not Affect The Production..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- High and low level output: If there is induction, the output is high level; no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
See On Amazon #6
Taidacent High Low Water Level Controller and 2 Level Sensor Probe Cable Length 5 Meter Cable to Automatic Control of Container Tube Liquid Level
Asin: B082YYBNDS | Ean: 0734831004172 | UPC: 734831004172
Manual Automatic Switching: The Controller Enters The Automatic Working Mode By Default When It Is Turned On. Press The K1 Key To Switch The Working Mode. The Red Light Is On For The Automatic Mode, And The Red Light Is Off For The Manual Mode..
Non-Contact Inductive Probe: It Adopts Non-Contact Capacitive Sensing Technology And Special Inductive Control Chip Design. The Probe Is Durable, Strong Anti-Interference Ability, Sensitive Inductive, Non-Contact With Liquid, Anti-Corrosion, Safe And Environmental Protection Without Pollution..
Pumping Overtime Protection: Continuous Automatic Pumping For More Than 5 Hours, Automatically Stop The Pump. The Work Indicator Flashes Quickly, You Can Press The K2 Key To Stop, Or Automatically Resume Standby By Delay..
Features
- Automatic water level control: the water level is lower than the low-level induction probe, the water pump is automatically started, the water level rises to a high level, and the water pump is automatically turned off.
- Pumping overtime protection: continuous automatic pumping for more than 5 hours, automatically stop the pump. The work indicator flashes quickly, you can press the K2 key to stop, or automatically resume standby by delay.
- Manual automatic switching: The controller enters the automatic working mode by default when it is turned on. Press the K1 key to switch the working mode. The red light is on for the automatic mode, and the red light is off for the manual mode.
- Non-contact inductive probe: It adopts non-contact capacitive sensing technology and special inductive control chip design. The probe is durable, strong anti-interference ability, sensitive inductive, non-contact with liquid, anti-corrosion, safe and environmental protection without pollution.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida
See On Amazon #7
Taidacent Non Contact Levels of Measurement Flow Sensor Water Level Sensor Level Transmitter Float Switch Water Level Switch PNP Output
Asin: B07FC4Z2V6 | Model: Y26-PNP | PartNumber: Y26-PNP | Ean: 0702004746228 | UPC: 702004746228
The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
Pnp Output: If There Is Induction, The Output Is High Level; No Induction, Disconnected.
The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
The Liquid Level Sensor (Probe) Is Installed Above And Below The Outer Wall Of The Container To Be Tested (The High And Low Positions Of The Liquid Level). The Non-Metallic Container Does Not Need To Be Opened, And The Installation Is Simple And Does Not Affect The Production..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- PNP output: If there is induction, the output is high level; no induction, disconnected
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.00 pounds
See On Amazon #8
Taidacent 2 Points Non Contact Capacitive Liquid Level Sensor Digital Slide Mount Multi Level Liquid Water Indicator Switch
Asin: B0B4K5HZXS | Model: D6CS-2116D | PartNumber: D6CS-2116D | Ean: 0738190909925 | UPC: 738190909925
2 Detection Points Power Consumption 150Mw The Water Level Is Higher Than The Detection Point 0V Output Signal High And Low Level - Digital Signal.
Hand Sanitizer Machines, Pet Feeders And Other Equipment That Require Multi-Point Liquid Level Detection.
The Water Level Is Lower Than The Detection Point 3.3~5V Working Temperature -20~65°C.
Working Voltage 3.3~5V Response Time < 1 Second Rated Current 30Ma.
Features
- When the water level is lower than the detection point, a high-level signal (3.3~5V) is output, and the signal light goes out; When the water level is higher than the detection point, a low-level signal (0v) is output, and the green signal light is on.
- Working voltage 3.3~5V Response time < 1 second Rated current 30mA
- 2 detection points Power consumption 150mw The water level is higher than the detection point 0v Output signal high and low level - digital signal
- The water level is lower than the detection point 3.3~5V Working temperature -20~65 C
- Hand sanitizer machines, pet feeders and other equipment that require multi-point liquid level detection
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
Dimensions: 0.06 x 2.56 x 0.48 Inches
See On Amazon #9
Taidacent Double Liquid Detect Optical Level Sensor Module Infrared Water Level Sensor Liquid Level Monitor Sensor Relay Switch Output for Tank Automatic Water Level Control System (Pumping Type)
Asin: B082Y77MMD | Ean: 0734831005391 | UPC: 734831005391
Output: Relay Switch Output Withstand Current Up To 30A.
Insulation Resistance: 100Mω.
Response Time: <500Ms.
The Working Current: <100Ma.
Features
- the working voltage: AC85 ~ 265V
- the working current: <100MA
- output: relay switch output withstand current up to 30A
- Response time: <500ms
- Insulation resistance: 100M
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida
See On Amazon #10
Taidacent Auto Con Water Level Controller Automatic Water Level Controller with Two Water Level Sensor (Probe Wire Length: 5m)
Asin: B07WXPK9WP | Model: TD-362-2 | PartNumber: TD-362-2
When The Liquid Level Reaches A Certain Height, The High Liquid Level Sensor Sends A Signal To Trigger The Controller To Disconnect The Relay To Automatically Stop The Pump Operation. This Cycle Works To Achieve Automatic Control Of The Liquid Level Of The Container, Keeping The Liquid Level Of The Container Stable..
The Probe Has High Temperature Resistance And Can Sense Boiling Water, Which Is Especially Suitable For Environments With High Temperature And Difficult To Detect Such As Solar Water Tower Boilers. It Is Not Affected By Special Environmental Influences Such As Magnetic Field, Pressure, Strong Acid Liquid, Etc. It Does Not Need To Contact Liquid, Does Not Pollute Water Source, Has Long Service Life And Is Widely Used..
This Product Can Directly Drive A Load Of 1600W..
When The Liquid Level Of The Container Is Too Low, The Low Liquid Level Alarm Signal Triggered By The Low Liquid Level Sensor Triggers The Controller To Close The Relay To Start The Water Pump To Add Liquid Level..
Features
- This product consists of a high and low level controller and two liquid level detection probes to achieve the level control function.
- When the liquid level of the container is too low, the low liquid level alarm signal triggered by the low liquid level sensor triggers the controller to close the relay to start the water pump to add liquid level.
- When the liquid level reaches a certain height, the high liquid level sensor sends a signal to trigger the controller to disconnect the relay to automatically stop the pump operation. This cycle works to achieve automatic control of the liquid level of the container, keeping the liquid level of the container stable.
- This product can directly drive a load of 1600W.
- The probe has high temperature resistance and can sense boiling water, which is especially suitable for environments with high temperature and difficult to detect such as solar water tower boilers. It is not affected by special environmental influences such as magnetic field, pressure, strong acid liquid, etc. It does not need to contact liquid, does not pollute water source, has long service life and is widely used.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida-362
See On Amazon #11
Non Contact Liquid Level Sensor, Output Interface IP67 Waterproof XKC Y25-NPN 5-12V
Asin: B0CSZ473D2
Power Interference Handling: Special Handling For Power Frequency Interference And Common Mode Interference Makes This Sensor Compatible With All 5~12V Power Adapters On The Market..
Detects Multiple Substances: Liquids, Powders, And Particulate Matter Can Be Detected With This Sensor, Making It A Highly Versatile Product..
Strong Compatibility: This Sensor Has A Strong Compatibility With Non-Metallic Containers And Can Sense Through Various Materials, With A Sensing Distance Up To 20Mm..
Intelligent Liquid Level Reference Adjustment And Liquid Level Memory Function, Liquid Level Status Display Mode, Multi-Point Series Connection.
Features
- Versatile Liquid Sensing: This sensor is suitable for liquid sensing in all types of containers, including but not limited to plastic, glass, and ceramic containers.
- Intelligent liquid level reference adjustment and liquid level memory function, liquid level status display mode, multi-point series connection
- Power Interference Handling: Special handling for power frequency interference and common mode interference makes this sensor compatible with all 5~12V power adapters on the market.
- Strong Compatibility: This sensor has a strong compatibility with non-metallic containers and can sense through various materials, with a sensing distance up to 20mm.
- Detects Multiple Substances: Liquids, powders, and particulate matter can be detected with this sensor, making it a highly versatile product.
- See more on Amazon...
Brand: Yuecoom | Manufacturer: Yuecoom
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.04 pounds
See On Amazon #12
-contact Liquid Level Sensor Kit - Accurate Capacitive Water Level Switch for Precise Liquid Detection - DC Water Level Sensor - Liquid Level Monitoring Solution]
Asin: B0CNNS8QHZ | Model: YZTS942516 | PartNumber: YZTS942516
Liquid Detection Sensor: Perfect For Various Applications, This Sensor Kit Is An Solution For Monitoring Liquid Levels. Its-Intrusive Nature The Of Or Interference, Making It Suitable For Liquids Such Chemicals Or Potable Water..
Accurate Liquid Level Switch: This Kit Delivers Precise Liquid Level Measurements, Enabling Accurate Monitoring And. Its High Sensitivity And Reliability Make It A Dependable Choice For A Range Of Industries, Including Agriculture, Industrial Manufacturing, And Home Automation..
Dc Water Level Sensor: Powered By A Direct Current, This Water Level Sensor Is Easily Integrated Into Existing Systems For Seamless Liquid Level Monitoring. Its Low Power Consumption Ensures Energy Efficiency While Maintaining Consistent Accuracy..
Capacitive Water Level Switch: With Its Innovative Design, This Kit Provides Reliable And Efficient Liquid Level Detection Using Capacitance Technology. It Offers Performance Compared To Traditional Float Switches Or Mechanical Alternatives..
Features
- contact liquid level sensor: This advanced capacitive water level switch allows for precise liquid detection without the need for physical contact, ensuring accurate monitoring and minimizing potential damage to the sensor.
- Capacitive water level switch: With its innovative design, this kit provides reliable and efficient liquid level detection using capacitance technology. It offers performance compared to traditional float switches or mechanical alternatives.
- Liquid detection sensor: Perfect for various applications, this sensor kit is an solution for monitoring liquid levels. Its-intrusive nature the of or interference, making it suitable for liquids such chemicals or potable water.
- DC water level sensor: Powered by a direct current, this water level sensor is easily integrated into existing systems for seamless liquid level monitoring. Its low power consumption ensures energy efficiency while maintaining consistent accuracy.
- Accurate liquid level switch: This kit delivers precise liquid level measurements, enabling accurate monitoring and. Its high sensitivity and reliability make it a dependable choice for a range of industries, including agriculture, industrial manufacturing, and home automation.
- See more on Amazon...
Brand: Ottjakin | Manufacturer: Ottjakin
Dimensions: 4.60 x 0.20 x 3.08 Inches | Weight: 0.00 pounds
See On Amazon #13
Non Contact Sensor and Liquid Level Detection,Liquid Level Sensor,Liquid Level Monitoring, IP67 Waterproof XKC Y25-NPN 5-12V
Asin: B0CMJ166YN
[Ip67 Waterproof] - Designed For Harsh Environments, The Sensor Features Ip67 Waterproofing, Making It Suitable For Use In A Variety Of Non-Metallic Containers, Including Plastic, Glass, And Ceramics. The Sensing Distance Can Reach Up To 20Mm..
[Lightning-Fast Response] - This Sensor Offers Quick Response Times (500Ms) And High Sensitivity. It Can Detect Liquids, Powders, And Particulate Matter, Making It Suitable For A Wide Range Of Industrial And Electrical Applications..
[Large Voltage Range] - With A Wide Voltage Range Of 5-12V, This Sensor Is Compatible With Various Circuits And Product Applications, Offering Versatility And Convenience..
[High-Performance Liquid Level Sensor] - Our Xkc Y25-Npn Sensor Offers Accurate And Stable Liquid Level Detection Without Direct Contact With Liquids. It's Ideal For Non-Metallic Pipes And Is Resistant To Corrosive Liquids, Scale, And Debris..
Features
- [NON-CONTACT TECHNOLOGY] - This sensor uses a pure electronic circuit structure with non-mechanical working mode, providing stable performance and longevity. It's not affected by external electromagnetic interference, making it highly reliable.
- [HIGH-PERFORMANCE LIQUID LEVEL SENSOR] - Our XKC Y25-NPN sensor offers accurate and stable liquid level detection without direct contact with liquids. It's ideal for non-metallic pipes and is resistant to corrosive liquids, scale, and debris.
- [IP67 WATERPROOF] - Designed for harsh environments, the sensor features IP67 waterproofing, making it suitable for use in a variety of non-metallic containers, including plastic, glass, and ceramics. The sensing distance can reach up to 20mm.
- [LARGE VOLTAGE RANGE] - With a wide voltage range of 5-12V, this sensor is compatible with various circuits and product applications, offering versatility and convenience.
- [LIGHTNING-FAST RESPONSE] - This sensor offers quick response times (500ms) and high sensitivity. It can detect liquids, powders, and particulate matter, making it suitable for a wide range of industrial and electrical applications.
- See more on Amazon...
Brand: Pilipane | Manufacturer: Pilipane
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.04 pounds
See On Amazon #14
Liquid Level Sensor Non Contact NPN Output Interface IP67 Waterproof XKC Y25-NPN 5-12V, Accurate and Stable
Asin: B0CF5T6CWL | Model: GHJK00352 | PartNumber: GHJK00352
High Stability, High Sensitivity, Strong Interference Ability, Free From External Electromagnetic Interference.
The Test Is Accurate And Stable, And The Boiling Water Level Can Be Detected.
Pure Electronic Circuit Structure, Non-Mechanical Working Mode, Stable Performance And Longevity..
Intelligent Liquid Level Reference Adjustment And Liquid Level Memory Function, Liquid Level Status Display Mode, Multi-Point Series Connection.
Features
- It is suitable for the outer wall of non-metallic pipes without direct contact with liquids, and will not be corroded by corrosive liquids such as strong acid and alkali, and is not affected by scale or other debris.
- Intelligent liquid level reference adjustment and liquid level memory function, liquid level status display mode, multi-point series connection
- High stability, high sensitivity, strong interference ability, free from external electromagnetic interference
- Pure electronic circuit structure, non-mechanical working mode, stable performance and longevity.
- The test is accurate and stable, and the boiling water level can be detected
- See more on Amazon...
Brand: MLMLH | Manufacturer: MLMLH
Dimensions: 0.79 x 4.72 x 3.15 Inches
See On Amazon #15
Taidacent NPN High Low Level Contactless Automatic Water Tank Level Sensor XKC Non Contact Inductive Oil Liquid Level Sensor Surface Cover (XKC-Y29A-V)
Asin: B0CDP5M2Y8 | Model: XKC-Y29A-V | PartNumber: XKC-Y29A-V | Ean: 0738190908058 | UPC: 738190908058
Detection Of Water-Based Fluid In Flat Containers, Water-Based Solvent. The Liquid Level In The Container Or Pipe Can Be Detected Without Direct Contact With The Medium Itself..
Black Line Can Replace The Sensor Button Calibration Function, Play The Role Of Remote Calibration Sensor Sensitivity..
It Can Reliably Detect The Medium, With High Stability; Compensate For The Residual Water, Milk, Honey, Latex, Body Fluids (Blood), Acid Or Alkaline Solution In The Container, To Achieve The Function Of Actual Differentiation Level..
Response Time <100Ms Inductance Thickness 10Mm Temperature Drift <20% Electrical Conductivity <50Ms Liquid Accuracy 3Mm.
Features
- Output signal High and low level/ NPN Power supply DC12V-24V Power ripple <10% Power consumption <10mA Power delay <500mS
- Response time <100mS Inductance thickness 10mm Temperature drift <20% Electrical conductivity <50mS Liquid accuracy 3mm
- Detection of water-based fluid in flat containers, water-based solvent. The liquid level in the container or pipe can be detected without direct contact with the medium itself.
- It can reliably detect the medium, with high stability; compensate for the residual water, milk, honey, latex, body fluids (blood), acid or alkaline solution in the container, to achieve the function of actual differentiation level.
- Black line can replace the sensor button calibration function, play the role of remote calibration sensor sensitivity.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
Dimensions: 0.06 x 2.56 x 0.48 Inches
See On Amazon #16
Xkc-y25-npn Smart Non-contact Liquid Level Sensor Detection Tool for Airtight containers. 8 X 7 X 3 Non-contact Liquid Level Sensor Xkc-y25-npn
Asin: B0CB12W8L2 | Model: SUPYINIbixohygpce | PartNumber: SUPYINIbixohygpce
Non-Contact Liquid Level Sensor: Non-Contact Liquid Level Sensor Is Suitable For Non-Metallic Containers Without Direct Contact With The Liquid, Unaffected By Scale Or Other Contaminants.
Accurately Reliable: High Stability, High Sensitivity And Strong Anti-Interference Ability Ensure It Will Not Be Affected By Electromagnets. It Is Specially Designed To Deal With Power Frequency Noise And Common Mode Noise.
High Stability, High Sensitivity And Strong Anti-Interference Ability Ensure It Is Not Affected By Electromagnets. It Is Specifically Designed To Deal With Power Frequency Interference And Common Mode Interference.
Stable Performance And Durability: Electronic Circuit Structure Ensures Stable Performance And Durability. It Has A Wide Range Of Uses And Has No Special Requirements For The Liquid Medium And The Material Of The Container, Infrared Liquid Level Sensor For Liquid Tanks And Ultrasonic Liquid Level Sensor.
Features
- Wireless RV water tank sensor, high stability, high sensitivity, strong anti-interference ability ensure it is not affected by electromagnet, specially designed to deal with power frequency interference and common mode interference
- STABLE PERFORMANCE AND DURABILITY: Electronic circuit structure ensures stable performance and durability. It has a wide range of uses and has no special requirements for the liquid medium and the material of the container, infrared liquid level sensor for liquid tanks and ultrasonic liquid level sensor
- Non-Contact Liquid Level Sensor: Non-contact liquid level sensor is suitable for non-metallic containers without direct contact with the liquid, unaffected by scale or other contaminants
- High stability, high sensitivity and strong anti-interference ability ensure it is not affected by electromagnets. It is specifically designed to deal with power frequency interference and common mode interference
- ACCURATELY RELIABLE: High stability, high sensitivity and strong anti-interference ability ensure it will not be affected by electromagnets. It is specially designed to deal with power frequency noise and common mode noise
- See more on Amazon...
Brand: SUPYINI | Manufacturer: SUPYINI
See On Amazon #17
Intelligent Non Contact Liquid Level Sensor Detection Tool for Airtight Container 8 * 7 * 3 Level Non Contact Water Sensor
Asin: B0C758R54H | Model: EMUKOEPogrsm4utbg | PartNumber: EMUKOEPogrsm4utbg
High Stability, High Sensitivity: Electronic Circuit Structure Instead Of Mechanical Structure Can Stable Performance, Ility And Long Service Life. Strong Anti Interference Ability That It Is Not Affected By Electromag , And Is Specially Ed To Deal With Power Frequency Interference And Common Mode Interference..
Taidacent Non Contact Liquid Sensor, Usage: Strong Compa Lity Through Variety Of Non Metallic L Containers, Such As Plastic, Glass, Ceramics Etc, With 13Mm Or More Induction Distance.
Function: Intelligent Liquid Adjustment And Memory Function, Liquid Display Mode, Can Achieve Multi Point Series Connection.
Liquid Sensors, Liquid Indicators, Intelligent Adjustment Of The Liquid And Fill Sto Function, Liquid Display Mode, Can Achieve Multi Point Series Connection.
Features
- The non contact liquid sensor has ligent liquid reference adjustment and liquid sto functions, and the liquid display mode can realize multi point series connection. It is widely applicable to non metallic containers that are not in direct contact with liquid and are not affected by scale or other impurities.
- liquid sensors, liquid indicators, Intelligent adjustment of the liquid and fill sto function, liquid display mode, can achieve multi point series connection
- High stability, high sensitivity: electronic circuit structure instead of mechanical structure can stable performance, ility and long service life. Strong anti interference ability that it is not affected by electromag , and is specially ed to deal with power frequency interference and common mode interference.
- Function: Intelligent liquid adjustment and memory function, liquid display mode, can achieve multi point series connection
- taidacent non contact liquid sensor, USAGE: Strong compa lity through variety of non metallic l containers, such as plastic, glass, ceramics etc, with 13mm or more induction distance
- See more on Amazon...
Brand: EMUKOEP | Manufacturer: EMUKOEP
See On Amazon #18
Mrisata XKC Y25 NPN Intelligent Non Contact Liquid Level Sensor Detection Tool for Airtight Container 8 * 7 * 3cm Liquid contactless Sensor xkc y25 npn
Asin: B0C5M6MKBR | Model: Mrisatayhq9gb021d | PartNumber: Mrisatayhq9gb021d
Non Contact Liquid Sensor: Non Contact Liquid Sensor Is Applicable To Non Metallic Containers Without Direct Contact With The Liquid, Not Affected By Scale Or Other Impurities.
Accurate Reliable: High Stability, High Sensitivity, Strong Anti Interference Ability Make Sure It Won Be Affected By Electromagnet, Special Ed To Deal With Power Frequency Interference And Common Mode Interference.
High Stability, High Sensitivity And Strong Interference Ability That It Is Not Affected By Electromag . It Was Specially Developed For The Treatment Of Mains Frequency Dist Ces And Common Mode Dist Ces.
Stable Performance And Durability: Electronic Circuit Structure Stable Performance And Ility. It Can Be Widely Used And Has No Special Requirement For Liquid Medium And L Of Container, Liquid Tank Infrared Sensor, Onic Liquid Sensor.
Features
- rv wireless water tank sensor , High stability, high sensitivity, strong anit interference ability make sure it won be affected by electromagnet, special ed to deal with power frequency interference and common mode interference
- STABLE PERFORMANCE AND DURABILITY: Electronic circuit structure stable performance and ility. It can be widely used and has no special requirement for liquid medium and l of container, liquid tank infrared sensor, onic liquid sensor
- Non contact liquid sensor: Non contact liquid sensor is applicable to non metallic containers without direct contact with the liquid, not affected by scale or other impurities
- High stability, high sensitivity and strong interference ability that it is not affected by electromag . It was specially developed for the treatment of mains frequency dist ces and common mode dist ces
- ACCURATE RELIABLE: High stability, high sensitivity, strong anti interference ability make sure it won be affected by electromagnet, special ed to deal with power frequency interference and common mode interference
- See more on Amazon...
Brand: Mrisata | Manufacturer: Mrisata
See On Amazon #19
Non Contact Liquid Level Sensor, Liquid Level Sensor Non Contact nPN Output Interface IP67 Waterproof XKC Y25-NPN 5-12V
Asin: B0C3D3FM8C
【Strong Compatibility】This Sensor Has A Strong Compatibility With Non-Metallic Containers And Can Sense Through Various Materials, With A Sensing Distance Up To 20Mm..
【Wide Voltage Range】With A Voltage Range Of 5~12V, This Sensor Is Suitable For Connecting Various Circuits And Product Applications. Additionally, Its Ip67 Waterproof Rating Makes It Highly Durable And Long-Lasting..
【Detects Multiple Substances】Liquids, Powders, And Particulate Matter Can Be Detected With This Sensor, Making It A Highly Versatile Product..
【Power Interference Handling】Special Handling For Power Frequency Interference And Common Mode Interference Makes This Sensor Compatible With All 5~12V Power Adapters On The Market..
Features
- Versatile Liquid Sensing This sensor is suitable for liquid sensing in all types of containers, including but not limited to plastic, glass, and ceramic containers.
- Power Interference Handling Special handling for power frequency interference and common mode interference makes this sensor compatible with all 5~12V power adapters on the market.
- Strong Compatibility This sensor has a strong compatibility with non-metallic containers and can sense through various materials, with a sensing distance up to 20mm.
- Detects Multiple Substances Liquids, powders, and particulate matter can be detected with this sensor, making it a highly versatile product.
- Wide Voltage Range With a voltage range of 5~12V, this sensor is suitable for connecting various circuits and product applications. Additionally, its IP67 waterproof rating makes it highly durable and long-lasting.
- See more on Amazon...
Brand: Oubit | Manufacturer: Oubit
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.04 Pounds
See On Amazon
Looking For Something Else?
Search