Power Supply Breakout Board Adapter DPS-1200FB/QB PCI-E 6Pin Add 2PSU Mining BTC
Asin: B07FK7Y9JQ | Ean: 0661585242898 | UPC: 661585242898
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.9 Of 6 Pin Pci-E Output.
Solid Capacitor Filter.
1 Of 4 Pin Output.
Support Up To 1600W Psu.
Features
- 2 OZ Copper PCB
- Support Up to 1600W PSU
- 9 of 6 Pin PCI-E output
- 1 of 4 Pin Output
- Solid capacitor Filter
- See more on Amazon...
Brand: Mustpoint | Manufacturer: Mustpoint
See On Amazon Similar To Power Supply Breakout Board Adapter
#1
Wishiot Thumb Joystick Module Dual Axis Sensor Game Controller Sensor Joystick Breakout Module Compatible with Arduino PS2 Raspberry Pi (2)
Asin: B0BFQTLM5T
✧【Applicable】：Game Stick Module For Arduino Ps2, Electronic Building Block Standard Connector With 2.54Mm Pins, Can Be Easily Connected To Arduino By Normal Io Expansion Shield With Cables.
✧【 Any Questions?】Please Click “Wishiot”(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click “Ask A Question” To Contact Us.
✧【Output】：The Do Port Is Used For Digital Output, And The Ao Port Is Used For Analog Output.
✧【Composition】：The Joystick Is A Combination Of 2 Analog Potentiometers And A Digital Switch, Just Connect To The Two Analog Inputs And The Robot Can Listen To Your Commands With X,Y Control. Bidirectional 10 K Resistor, The Resistance Varies With The Joystick In Different Directions.
Features
- Regarding the voltage :You will get 2 joystick sensor modules. The module uses 5V power supply, and the original state reading voltage of X and Y is 2.5V. In the direction of the arrow, the voltage increases, the maximum value is 5V, and in the opposite direction of the arrow, the voltage value decreases, and the minimum value is 0V
- Composition The joystick is a combination of 2 analog potentiometers and a digital switch, just connect to the two analog inputs and the robot can listen to your commands with X,Y control. Bidirectional 10 k resistor, the resistance varies with the joystick in different directions
- Applicable Game stick module for Arduino PS2, electronic building block standard connector with 2.54mm pins, can be easily connected to Arduino by normal IO Expansion Shield with cables
- Output The DO port is used for digital output, and the AO port is used for analog output
- Any questions? Please click Wishiot (you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to contact us
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Dimensions: 0.79 x 1.57 x 0.79 inches
See On Amazon #2
Power Supply Module, Switching Power Supply, Power Supply Board, Suitable for Bringing Improved Features to Your Gaming Console
Asin: B0D14RSLLP
Precisionly Assembly And Installation: The Precise Cutting And Interfacing Of This Power Module Ensure A Perfect Fit During Installation, Seamlessly Replacing Old Or Damaged Accessories, And Improving The Overall Performance Of The System..
Multifunctional Power Solution: This Dc Regulated Power Module Can Be Used As A Versatile Replacement For The 35008 Gaming Console, Meeting A Wide Range Of Gaming Needs And Ensuring Seamless Compatibility..
Easy To Install For Optimal Functionality: With A Simple Installer, This Power Strip Facilitates The Easy Replacement Process, Bringing Improved Functionality And Performance To Your Gaming Console..
Professional Chipset For Improved Performance: This Power Console Board Is Designed With A Professional Chipset To Provide Exceptional Performance, Providing Reliable And Sustainable Power To Console Systems..
Features
- DURABLES HIGH QUALITY MATERIAL: This switching power supply is made of high quality PCB material, which can withstand wear and tear, is durables, and can be reused for a long time.
- PROFESSIONAL CHIPSET FOR IMPROVED PERFORMANCE: This power console board is designed with a professional chipset to provide exceptional performance, providing reliable and sustainable power to console systems.
- PRECISIONLY ASSEMBLY AND INSTALLATION: The precise cutting and interfacing of this power module ensure a perfect fit during installation, seamlessly replacing old or damaged accessories, and improving the overall performance of the system.
- EASY TO INSTALL FOR OPTIMAL FUNCTIONALITY: With a simple installer, this power strip facilitates the easy replacement process, bringing improved functionality and performance to your gaming console.
- MULTIFUNCTIONAL POWER SOLUTION: This DC regulated power module can be used as a versatile replacement for the 35008 gaming console, meeting a wide range of gaming needs and ensuring seamless compatibility.
- See more on Amazon...
Brand: MUNEFE | Manufacturer: MUNEFE
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.33 pounds
See On Amazon #3
HiLetgo 5pcs 3.3V 5V Power Supply Module for MB102 102 Prototype Breadboard DC 6.5-12V or USB Power Supply Module
Asin: B00HJ6AE72 | Model: 3-01-0051 | PartNumber: 3-01-0051 | Ean: 0797698770116 | UPC: 797698770116
Maximum Output Current: <700Ma.
Onboard Two 3.3V, 5V Dc Output Pin.
Input Voltage: 6.5-9V (Dc) Or Usb Power Supply.
Output Voltage: 3.3V, 5V.
Features
- HiLetgo 3.3V 5V Power Supply Module
- Output voltage: 3.3V, 5V
- Maximum output current: <700mA
- Input voltage: 6.5-9V (DC) or USB power supply
- Onboard two 3.3V, 5V DC output pin
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.13 pounds
See On Amazon #4
DROK Adjustable Voltage Regulator DC, Buck Boost Converter 6.0V-36V 9v 12v to DC 0.6-36V 24v 5A Power Supply Panel, Constant Current Volt Step Up Down Module
Asin: B089ND7PTH | Model: 200517 | PartNumber: 200517
Application --- A Compact And Powerful, On The Go Variable Power Supply Or Led Driver; Diy Lab Power Supply..
Memory Data --- 10 Data Groups Of M0-M9 Can Be Stored. Default Will Be Stored In Data Group M0 And M1/M2 Data Group Can Be Quickly Called Up..
Digital Display --- Input Or Out Voltage, Current, Temperature, Power, Electric Capacity, Electric Quantity, Running Time, Voltage And Current Curve, System And Power Parameters..
Easy To Use --- Allows To Set Volts And Limit The Current, Power On Off And Accurate Voltage Setting Return After Power Down..
Features
- Variable Power Supply --- input voltage range DC 6.0-36V, output voltage range DC 0.6-36V, max output current 5A, max output power 80W.
- Easy to Use --- allows to set volts and limit the current, power on off and accurate voltage setting return after power down.
- Application --- a compact and powerful, on the go variable power supply or LED driver; DIY lab power supply.
- Digital Display --- input or out voltage, current, temperature, power, electric capacity, electric quantity, running time, voltage and current curve, system and power parameters.
- Memory Data --- 10 data groups of M0-M9 can be stored. Default will be stored in data group M0 and M1/M2 data group can be quickly called up.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #5
JUZITAO 8pcs USB-C PD Type C Trigger Board PD/QC Decoy Fast Charger Module Support DC 9V 12V 15V 20V for Laptop,Router,Optical Modem Adapter
Asin: B0C9QJ16T7 | Ean: 0687117713025 | UPC: 687117713025
The Size Of The Pd Decoy Board: 23*11.5*4Mm.
Package Included：8Pcs Pd/Qc Decoy Board Fast Charge Usb Boost Module Type-C Pd2.0 Pd3.0 9V 12V 15V 20V Fast Charge Trigger Polling Detector Module.
Maximum Support 5A; Type-C Port Power Supply.
Usb-C Port Power Supply;Turn Some Traditional Dc-Powered Devices Into Type-C Port Power Supply.
Features
- Support a variety of fast charging protocols:PD3.0/2.0, PPS/QC4+, QC3.0/2.0, FCP, AFC
- USB-C port power supply;Turn some traditional DC-powered devices into TYPE-C port power supply
- The size of the PD decoy board: 23*11.5*4mm
- Maximum support 5A; TYPE-C port power supply
- Package Included 8PCS PD/QC Decoy Board Fast Charge USB Boost Module Type-c PD2.0 PD3.0 9V 12V 15V 20V Fast Charge Trigger Polling Detector Module
- See more on Amazon...
Brand: JUZITAO | Manufacturer: JUZITAO
See On Amazon #6
3PCS USB-C PD QC Trigger 9V 12V 15V 20V DC Adjustable Voltage Power Module 5A Type-C Female Input (Default 20V ), Black
Asin: B0B688SKNK | Model: ASDS-ZH081 | PartNumber: ASDS-ZH081
Supports Pd Qc Protocol Supports Up To 5A.
To Use More Than 3A You Need An Electronically Marked Type-C Cable Requires True Usb Pd Power, Not Available With Qc Only Chargers.
Not All Usb-C Power Supplies Can Support All Voltages If The Power Supply Does Not Support The Requested Voltage, The Next Lowest Voltage Will Be Provided.
Power Electronic Projects Or Convert Older Hardware To Use The Usb-C Power Input.
Features
- Please follow the picture, select the voltage value you want to weld
- Power electronic projects or convert older hardware to use the USB-C power input
- Supports PD QC protocol Supports up to 5A
- Not all USB-C power supplies can support all voltages If the power supply does not support the requested voltage, the next lowest voltage will be provided
- To use more than 3A you need an electronically marked Type-C cable Requires true USB PD power, not available with QC only chargers
- See more on Amazon...
Brand: Generic | Manufacturer: Esedese
See On Amazon #7
FORIOT 8Pcs MB102 Breadboard 3.3V/5V Power Supply Module DC 6.5V-12V Input or USB Power Supply for Arduino Solderless Breadboard
Asin: B0CDP814R6 | Model: GXJI0010-002 | PartNumber: GXJI0010-002
The Mb102 Expansion Board Has Two On-Board Output Voltages Of 3.3V And 5V. The Board Comes With A Green Power Indicator..
Attention: The Input Voltage Of The Module Is Dc 6.5V-12V. If The Input Voltage Is 5V And The Output Voltage Is Not Reaching To 5V, There Will Be A Voltage Drop Between The Input And Output Of The Voltage Regulator Chip..
Power Extension Board Is Suitable For Electronic Building Blocks, Smart Car, Arduino Robot Light Power Extension..
The Power Supply Module Is Independently Controlled By The Upper And Lower Circuits, Which Can Switch The Voltage To 0V, 3.3V, And 5V Via Jumper Caps..
Features
- MB102 breadboard power supply module supports input voltage 6.5V-12V DC or power supply through USB interface, the maximum output current is less than 700mA.
- The power supply module is independently controlled by the upper and lower circuits, which can switch the voltage to 0V, 3.3V, and 5V via jumper caps.
- The MB102 expansion board has two on-board output voltages of 3.3V and 5V. The board comes with a green power indicator.
- Power extension board is suitable for electronic building blocks, smart car, Arduino robot light power extension.
- Attention: The input voltage of the module is DC 6.5V-12V. If the input voltage is 5V and the output voltage is not reaching to 5V, there will be a voltage drop between the input and output of the voltage regulator chip.
- See more on Amazon...
Brand: FORIOT | Manufacturer: FORIOT
See On Amazon #8
HiLetgo 2pcs AC-DC 220V to 12V Isolated Switching Power Supply Power Supply Module Board
Asin: B07V71JM63 | Model: 3-01-0905 | PartNumber: 3-01-0905
Input And Output Are Highly Isolated..
Four Corners Have A Fixed Mounting Hole To Prevent Movement 1 Vibration Lead To Productpower, Fixed Hole Straight By 3.2Mm..
High Efficiency, High Power Density, Low Output Ripple Noise, High Output Voltage Accuracy..
Features
- Universal input voltage: 85-264V AC or 110-370V DC The product is easy to install, can be used directly on the motherboard board.
- High efficiency, high power density, low output ripple noise, high output voltage accuracy.
- Input and output are highly isolated.
- Four corners have a fixed mounting hole to prevent movement 1 vibration lead to productpower, fixed hole straight by 3.2mm.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #9
D-FLIFE 5pcs USB-C PD Type C Trigger Board PD/QC Decoy Fast Charger Module Support DC 9V 12V 15V 20V for Laptop,Router,Optical Modem Adapter
Asin: B0CPDRY45Q | Ean: 0687117732934 | UPC: 687117732934
Usb-C Pd Trigger Board Module Pd/Qc Decoy Board Fast Charge Usb Type-C To 12V High Speed Charger Power Delivery Boost Module.
The Size Of The Pd Decoy Board: 23*11.5*4Mm.
Maximum Support 5A; Type-C Port Power Supply.
Usb-C Port Power Supply;Turn Some Traditional Dc-Powered Devices Into Type-C Port Power Supply.
Features
- Support a variety of fast charging protocols:PD3.0/2.0, PPS/QC4+, QC3.0/2.0, FCP, AFC
- USB-C port power supply;Turn some traditional DC-powered devices into TYPE-C port power supply
- USB-C PD Trigger Board Module PD/QC Decoy Board Fast Charge USB Type-c to 12v High Speed Charger Power Delivery Boost Module
- Maximum support 5A; TYPE-C port power supply
- The size of the PD decoy board: 23*11.5*4mm
- See more on Amazon...
Brand: D-FLIFE | Manufacturer: D-FLIFE
See On Amazon #10
DWEII 2-Pack Type-C QC AFC PD2.0 PD3.0 to DC Spoof Scam Fast Charge Trigger Polling Detector USB-PD Notebook Power Supply Change Board Module
Asin: B09VC552J2 | Ean: 0701715515321 | UPC: 701715515321
❃❃Voltage Regulation: According To The Table On The Back Of The Board, Adjust The Dip Switch To Control The Voltage Output.
❃❃Note(Important): 1. Since There Is No Voltage Indicator After Adjusting The Dip Switch, Use A Multimeter To Measure The Voltage Before Connecting To The Appl Ication Circuit. 2. If The Dip Switch Is Not Adjusted According To The Table, The Module Will Output Any Voltage Of The Above Voltage..
❃❃You Will Get 2Pcs Type-C Qc Afc Pd2.0 Pd3.0 To Dc Spoof Scam Fast Charge Trigger Polling Detector Usb-Pd Notebook Power Supply Change Board Module.
❃❃Fast Charging Protocols:Pd2.0/Pd3.0, Qc2.0/Qc3.0, And Afc.
Features
- Voltage: 5V, 9V, 12V, 15V, 20V (voltage step is not supported)
- Fast charging protocols:PD2.0/PD3.0, QC2.0/QC3.0, and AFC
- Voltage regulation: According to the table on the back of the board, adjust the dip switch to control the voltage output
- you will get 2pcs Type-C QC AFC PD2.0 PD3.0 to DC Spoof Scam Fast Charge Trigger Polling Detector USB-PD Notebook Power Supply Change Board Module
- Note(important): 1. Since there is no voltage indicator after adjusting the dip switch, use a multimeter to measure the voltage before connecting to the appl ication circuit. 2. If the dip switch is not adjusted according to the table, the module will output any voltage of the above voltage.
- See more on Amazon...
Manufacturer: DWEII
See On Amazon #11
Dweii 5PCS USB-C PD Trigger Board Module PD/QC Decoy Board Fast Charge USB Type-c to 12v High Speed Charger Power Delivery Boost Module
Asin: B0BY8H5MS1 | Ean: 0701715520769 | UPC: 701715520769
The Size Of The Decoy Board: 23*11.5*4Mm.
Type-C Port Power Supply;Turn Some Traditional Dc-Powered Devices Into Type-C Port Power Supply.
Support A Variety Of Fast Charging Protocols: Pd3.0/2.0, Pps/Qc4+, Qc3.0/2.0, Fcp, Afc.
Features
- you will get 5PCS PD/QC Decoy Board Fast Charge USB Boost Module Type-c PD2.0 PD3.0 9V 12V 15V 20V Fast Charge Trigger Polling Detector Module
- Support a variety of fast charging protocols: PD3.0/2.0, PPS/QC4+, QC3.0/2.0, FCP, AFC
- The size of the decoy board: 23*11.5*4mm
- TYPE-C port power supply;Turn some traditional DC-powered devices into TYPE-C port power supply
- See more on Amazon...
Brand: DWEII | Manufacturer: Dweii
See On Amazon #12
AITRIP 2PCS Type-C USB-C PD2.0 3.0 to DC USB Decoy Fast Charge Trigger Poll Detector 100W MA (ZY12PDN Bare Board)
Asin: B098WRDWF2 | Ean: 0701715467392 | UPC: 701715467392
Voltage: 3-20V.
Large-Capacity Ceramic Capacitor Filtering, Tvs Anti-Surge Anti-Reverse Connection, Japan Alps Tact Switch, Focusing On Stability..
100% Brand New And High Quality.
Current: 0-5A.
Features
- Maximum power support to 100W, excellent compatibility.
- Current: 0-5A
- Voltage: 3-20V
- 100% brand new and high quality
- Large-capacity ceramic capacitor filtering, TVS anti-surge anti-reverse connection, Japan ALPS tact switch, focusing on stability.
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #13
MakerHawk 4pcs USB DC-DC Voltage Buck Regulator Step Down Power Supply Module 9V 12V 24V to 5V Dual USB Output Buck Voltage Board 3A 6-26V Car Charge Charging Regulator
Asin: B07KWRH61D | Model: 4350466194 | PartNumber: 4350466194 | Ean: 0673400153531 | UPC: 673400153531
High Efficiency: The Boost Converter Module Is With High Conversion Efficiency Up To 98%. (The Higher The Input Voltage, The Higher The Efficiency).
Strong After-Sales Service Team: As Long As You Have Any Questions About The Product, We Will Resolve Your Issue Immediately If Received Your Email, Your Satisfactory Purchase Experience Is Our Greatest Hope! How To Email Us? Plz Click “Makerhawk-Us” And Click “Ask A Question” To Email Us! Looking Forward To Your Consultation!.
Note 1: Positive And Negative Can Not Be Reversed, And The Input Voltage Can Not Exceed 26V, Otherwise It Will Lead To Chip Damage! Note 2: When Working In Power, You Can Not Touch The Circuit Board On The Sampling Resistor, Ic Pin, Otherwise It May Lead To Damage To The Output Voltage Of The Device!.
Wide Application: Dc-Dc Step Down Voltage Converter Module Compatible With Many Phone Models, Such As Android Series, Iphone Series, Huawei, Millet, Nokia..
Features
- The input voltage range of mobile power supply boost module is DC6V-26V, output voltage range is DC5.2V, and output current range is 3A.
- Wide Application: DC-DC step down voltage converter module compatible with many phone models, such as Android series, iPhone series, Huawei, Millet, Nokia.
- High Efficiency: The boost converter module is with high conversion efficiency up to 98%. (The higher the input voltage, the higher the efficiency)
- Note 1: positive and negative can not be reversed, and the input voltage can not exceed 26V, otherwise it will lead to chip damage! Note 2: When working in power, you can not touch the circuit board on the sampling resistor, IC pin, otherwise it may lead to damage to the output voltage of the device!
- Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click MakerHawk-US and click Ask a question to email us! Looking forward to your consultation!
- See more on Amazon...
Brand: MakerHawk | Manufacturer: MakerHawk
Dimensions: 0.31 x 1.10 x 1.30 inches | Weight: 0.05 pounds
See On Amazon #14
AITRIP 10PCS Type-C PD2.0 PD3.0 9V 12V 15V 20V Fast Charge Trigger Polling Detector USB Boost Power Supply Change Module Charger Board
Asin: B0BY25F4YW | Ean: 0687117710055 | UPC: 687117710055
Support A Variety Of Fast Charging Protocols:Pd3.0/2.0, Pps/Qc4+, Qc3.0/2.0, Fcp, Afc.
10Pcs *Pd/Qc Decoy Board Fast Charge Usb Boost Module Type-C.
Pd/Qc Multi-Protocol Decoy 5V, 9V, 12V, 15V, 20V Voltage Adjustable.
Maximum Support 5A;Type-C Port Power Supply.
Features
- The size of the decoy board: 23*11.5*4mm
- Maximum support 5A;TYPE-C port power supply
- Support a variety of fast charging protocols:PD3.0/2.0, PPS/QC4+, QC3.0/2.0, FCP, AFC
- PD/QC multi-protocol decoy 5V, 9V, 12V, 15V, 20V voltage adjustable
- 10PCS *PD/QC decoy board fast charge USB boost module Type-c
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #15
ACEIRMC 60W 6-35V DC to USB Type C PD 3.0 QC4 Type A QC3.0 DC Fast Charge 12V 24V Step-Down Power Module USB Type-C Mobile Phone Quick Charge Adapter (1pcs)
Asin: B09D98799T | Ean: 0701715479616 | UPC: 701715479616
Supports All Major Fast Charge Protocols: Usb Pd 3.0 (Pps) Qc4+ Qc4.0 Qc3.0 Qc2.0 For Apple 2.4A For Samsung Afc For Huawei Scp/Fcp For Mtk Pe2.0.
Input Must Be 1V Higher Than The Output Size: 50X17x12mm Sw3516 Ic.
Blue Led Power Indicator Red Led Fast Charge Indicator.
Build Your Own 60W Usb-C Pd Fast Charger Steps Down Fixed Voltage Dc Input.
Features
- QC4.0 QC3.0 USB Type-C Mobile Phone Quick Charge Adapter 6 -35V Step Down Buck Boost Module for Huawei SCP/FCP Apple PD Qualcomm
- Build your own 60W USB-C PD Fast Charger Steps down fixed voltage DC input
- Supports all major fast charge protocols: USB PD 3.0 (PPS) QC4+ QC4.0 QC3.0 QC2.0 for Apple 2.4A for Samsung AFC for Huawei SCP/FCP for MTK PE2.0
- Blue LED Power Indicator Red LED Fast Charge Indicator
- Input must be 1V higher than the output Size: 50x17x12mm SW3516 IC
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #16
6 Pack MELIFE Type-C USB-C PD 12V DC Fixed Voltage Power Trigger Module 5A Type-C Female Input Module
Asin: B0953G14Q2 | Ean: 0701715464292 | UPC: 701715464292
Not All Usb-C Power Supplies Can Support All Voltages. If The Power Supply Does Not Support The Requested Voltage Then The Next Lowest Voltage Will Be Provided..
Attention: In Order To Use It Over 3A You Need To Use An Electronically Marked Type-C Cable. A Real Usb Pd Power Source Is Required, Will Not Work With Qc-Only Chargers..
The Module Just Performs The Pd Negotiation And Passes The Output..
Performs Pd Power Negotiation. Supports Up To 5A..
Features
- Power an electronic project or convert old hardware to use USB-C power input.
- Performs PD power negotiation. Supports up to 5A.
- Not all USB-C power supplies can support all voltages. If the power supply does not support the requested voltage then the next lowest voltage will be provided.
- The module just performs the PD negotiation and passes the output.
- Attention: In order to use it over 3A you need to use an electronically marked Type-C cable. A real USB PD power source is required, will not work with QC-only chargers.
- See more on Amazon...
Brand: MELIFE | Manufacturer: MELIFE
Weight: 0.02 pounds
See On Amazon #17
XIITIA 20pcs Mini USB Type C 3.7V Lithium Battery Charger Board 4.2V Charging Module with Protection Circuit and LED Charge Indicators(Type-C Port)
Asin: B0CGV2ZRCF | Ean: 0687117729361 | UPC: 687117729361
★With Protection Board, Over-Voltage Protection, Over-Discharge Protection, And Over-Current Protection. Over-Discharge Protection Value 2.4V; Over-Current Protection Value: 4A.
★Note: The First Time You Use It, You Need To Connect The Power Supply To Activate The Charging Protection Board! If You Are The First Time To Do This Job, We Suggest You Can Watch Related Video On The Internet Before Installation..
★Suitable For All Types Of 3.7V Lithium Batteries,Small Appliances Modification And Tablet Pc Retrofit Charging Port. Suitable For Single Lithium Battery (Parallel Connection Is Not Limited, Can Not Be Connected In Series)..
★Charges To 4.2V, Provides 100Ma Pre-Charging For Batteries With Voltages Under 2.9V; Incorporates Automatic Charge Cycle Termination And Resumption For Efficient Charging..
Features
- An ultra-small, 1A charging board for 3.7V lithium batteries with USB Type-C power input and LED charge indicators.
- Charges to 4.2V, provides 100mA pre-charging for batteries with voltages under 2.9V; Incorporates automatic charge cycle termination and resumption for efficient charging.
- With protection board, over-voltage protection, over-discharge protection, and over-current protection. Over-discharge protection value 2.4V; Over-current protection value: 4A
- Suitable for all types of 3.7V lithium batteries,small appliances modification and tablet PC retrofit charging port. Suitable for single lithium battery (parallel connection is not limited, can not be connected in series).
- Note: The first time you use it, you need to connect the power supply to activate the Charging protection board! If you are the first time to do this job, we suggest you can watch related video on the Internet before installation.
- See more on Amazon...
Brand: XIITIA | Manufacturer: XIITIA
See On Amazon #18
HiLetgo 2pcs Micro USB Power Breakout USB Voltage Regulator DC to DC Power Module Micro USB Power 5V to 1.8V/3.3V/5V/9V/12V
Asin: B07X9SQKL6 | Model: 3-01-1569 | PartNumber: 3-01-1569
Easily To Provide A Variety Of Voltages Power Supply For Modules, It Is Very Small, Do Not Take Up Desktop Space..
Input: Micro Usb 5V; Output: 1.8V, 3.3V, 5V, 9V Or 12V, Usb-A And 5.08Mm Terminals.
Features
- Micro USB Power Breakout USB Voltage Regulator
- Input: Micro USB 5V; Output: 1.8V, 3.3V, 5V, 9V or 12V, USB-A and 5.08mm terminals
- Easily to provide a variety of voltages power supply for modules, it is very small, do not take up desktop space.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #19
ALAMSCN 12PCS 5V 1A Boost Step Up Power Supply Module Lithium Battery Li-ion Charging Protection Board 134N3P DIY Charger LED Display USB and Micro Port
Asin: B08L6FYFNP | Model: AL12426 | PartNumber: AL12426 | Ean: 0701715442283 | UPC: 701715442283
Charge Status Indication: Charging- The Red Light Flashes While Charging; Red Light Is Always On, Charging Is Complete. Discharge- The Blue Light Flashes..
Note: To Connect With Lithium Batteries, It Can Only Be Connected In Parallel With A Voltage Of 3.7-4.2V, Not In Series..
Application: Batteries Like Polymer ,18650 Lithium ,Cell Phone ,Tablet And Mp3 Battery Ect..
Safety Protection Function: Constant Over Temperature Protection, Overcharge And Over Discharge Protection, Output Overvoltage Protection, Output Overload Protection, Output Short Circuit Protection, Etc..
Features
- Charging and discharging: 134N3P has built-in charging and discharging power MOS, the charging current can be set, the maximum charging current and maximum discharging current are 1A.
- Safety protection function: Constant over temperature protection, overcharge and over discharge protection, output overvoltage protection, output overload protection, output short circuit protection, etc.
- Charge status indication: Charging- The red light flashes while charging; Red light is always on, charging is complete. Discharge- The blue light flashes.
- Application: Batteries like Polymer ,18650 Lithium ,Cell Phone ,Tablet and MP3 Battery ect.
- Note: To connect with lithium batteries, it can only be connected in parallel with a voltage of 3.7-4.2V, not in series.
- See more on Amazon...
Brand: ALAMSCN | Manufacturer: ALAMSCN
Dimensions: 0.39 x 0.39 x 0.39 inches | Weight: 0.04 Pounds
Warranty: 3 months
See On Amazon #20
3PCS USB-PD USB-C Type-c PD3.0 PD2.0 to DC Scam Spoof Fast Charge Trigger Polling Detector Power Supply Regulator Module with Screw Polefor Terminal Notebook Power Supply Change Board Module
Asin: B09NXSQJ8Z | Ean: 0701715505896 | UPC: 701715505896
Only Can Trigger 15V/20V. Type-C Female Input Is Super Compatible And Fully Supports Traditional Female Or Direct Wired Pd Adapters..
Small Size 15Mm Wide * 30Mm Long, Soldered Dc Line Heat Shrinkable Tube Can Be Used To Charge Your Notebook With Pd Mobile Power..
Trigger Logic: Trigger The Voltage Supported By The Pd Adapter That Is Less Than Or Equal To The Set Value. For Example, If 15V Is Set And The Adapter Supports 5 9 20V, It Will Trigger 9V..
Voltage: 3-20V, Current: 0-5A, With Usb Soldering Position And 5.08 Screw Terminal Soldering Position, It Is Convenient To Make Type-C To Dc Adapter Cable..
Features
- The PD trigger uses the hardware protocol IC, maximum power support to 100W, excellent compatibility.
- Voltage: 3-20V, current: 0-5A, with USB soldering position and 5.08 screw terminal soldering position, it is convenient to make Type-C to DC adapter cable.
- Only can trigger 15V/20V. Type-C female input is super compatible and fully supports traditional female or direct wired PD adapters.
- Trigger Logic: Trigger the voltage supported by the PD Adapter that is less than or equal to the set value. For example, if 15v is set and the adapter supports 5 9 20V, it will trigger 9V.
- Small size 15mm wide * 30mm long, soldered DC line heat shrinkable tube can be used to charge your notebook with PD mobile power.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon
Looking For Something Else?
Search