Megaware SkegGuard with Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Fits Evinrude ETec 135-150-175-200hp 25" XL Shaft 2006-2014 & 225-250-300hp 2002-2014 - No Lightning or G2
Asin: B07FT5XK9B | Model: 27091 | PartNumber: 27091 | Ean: 0672057270912 | UPC: 672057270912
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27413 For Mercury: 250-300Hp Verado 4.6L V8 Ams, 5.44" Gearcase 2019-Present. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27413 for Mercury: 250-300HP Verado 4.6L V8 AMS, 5.44 Gearcase 2019-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 1.00 x 9.00 x 20.00 inches | Weight: 1.90 pounds
Warranty: Warranty
See On Amazon Similar To Megaware SkegGuard with Drain Hole
#1
27031 Skeg Guard Skeg Protector Kit Marine-Grade Stainless Steel Replacement for Mercury Mercruiser Alpha I Generation II 1991-2023
Asin: B0BXSFMW84 | Model: Y-M-27031 | PartNumber: Y-M-27031
Professional Design -- The Skeg Protector Kit Features A 3Mm Thickened Lower Wear Tab, Preventing Dragging On Ramps And Ensuring Optimal Performance During River Riding. Additionally, It Includes A Drain Hole At The Bottom To Prevent Corrosion And Freezing..
Easy Installation -- Secures With Self-Locking Hardware And Installs In As Little As 10 Minutes. It Can Be Installed With As Little As 2-3 Inches Of Skeg Remaining, Suitable For Repairing A Broken Skeg. The Package Includes Male And Female Locking Screws, As Well As An Allen Wrench For Convenient Installation..
Satisfaction Guarantee -- Yoursme Aims To Provide Excellent Products And Best Service For Customers. You Can Simply Return It If You Are Not Satisfied With The Product. We Support 30 Days Full Refund For Return And 12 Month Warranty..
Durable Material -- Constructed From Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, The Skeg Guard Is Built To Withstand The Elements And Provide Long-Lasting Protection..
Ultimate Skeg Protection -- Designed To Be Installed Over The Engine's Original Skeg. It Provides Ultimate Protection For Your Skeg, Whether You Want To Safeguard A New Skeg From Damage Or Repair An Impact-Damaged Or Chipped Skeg For Improved Performance..
Features
- Widely Fitment -- Directly replace OEM Part number 27031, Fit for Mercury Mercruiser Alpha I Generation II 1991-2023, providing reliable protection for the skeg against the harsh ocean environment.
- Ultimate Skeg Protection -- Designed to be installed over the engine's original skeg. It provides ultimate protection for your skeg, whether you want to safeguard a new skeg from damage or repair an impact-damaged or chipped skeg for improved performance.
- Professional Design -- The Skeg Protector Kit features a 3mm thickened lower wear tab, preventing dragging on ramps and ensuring optimal performance during river riding. Additionally, it includes a drain hole at the bottom to prevent corrosion and freezing.
- Durable Material -- Constructed from mirror-polished 18-gauge marine-grade 316 stainless steel, the Skeg Guard is built to withstand the elements and provide long-lasting protection.
- Easy Installation -- Secures with self-locking hardware and installs in as little as 10 minutes. It can be installed with as little as 2-3 inches of skeg remaining, suitable for repairing a broken skeg. The package includes male and female locking screws, as well as an allen wrench for convenient installation.
- Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty.
- See more on Amazon...
Brand: Yoursme | Manufacturer: Yoursme
Warranty: 1 Year Seller Warranty
See On Amazon #2
MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Fits Mercury MerCruiser Bravo 1 & 3 1990-Present (Not Compatible with XR Sport Models)
Asin: B005BI66FE | Model: 27051 | PartNumber: 27051 | Ean: 0672057270516 | UPC: 672057270516
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27051 For Mercury Mercruiser: Bravo 1 & 3 1990-Present (Not Compatible With Xr Or Sport Models). Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27051 for Mercury MerCruiser: Bravo 1 & 3 1990-Present (Not Compatible with XR or Sport Models). Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 0.20 x 0.20 x 0.08 Inches | Weight: 2.00 Pounds
See On Amazon #3
sixcow Skeg Guard Keel Guard 27341 for Mercury Mariner 40/50 / 60HP 2 & 4 Stroke 2003-Present & Evinrude Johnson 40-50 HP 4 Stroke 1999-2003, SkegGuard KeelGuar
Asin: B0BX22GXPG | Model: 27341 | PartNumber: 27341
【Built For Marine Environment】 Keel Guard Constructed Of High Quality Marine-Grade 316 Stainless Steel Material With An Extra Reinforced 3Mm Lower Wear Tab Across The Bottom. Protect Against Ramp Dragging Or Damage From Hidden Debris. Corrosion Resistance And Resist Damage. Stable, Reliable And Long-Lasting Durability..
【100% Satisfaction Guarantee】 Your Satisfaction Is Our Priority. We Strive To Give Our Customers Excellent Service. All Sixcow Products Support 30-Day Money-Back Guarantee, 12-Month Warranty For Quality-Related Issues. Simply Return It For Your Warranty..
【Easy To Install】 It Takes A Breeze To Install. Simply Slide And Match The Skeg Guard To The Skeg. Use Mallet For Proper Fit. Drill Through With 1/4’’ Holes. Install Hardwares With Hex Wrenches Provided. Then, You’Re Ready To Go. Comes With Stainless Steel Self Locking Hardware And Hex Wrenches. Please Make Sure The Model Fits Well With The Skeg On Your Motor Before Purchase..
【Skeg Guard & Broken Skeg Fixer】 Indispensable Skegguard Not Only Protects Motor’S Skeg From Damage, Also Quickly Fixes Broken Skeg With As Little As 2-3 Inches Of Skeg Remaining. Meanwhile, Perfect Design With Drain Hole In The Bottom To Prevent Water From Collecting And Stagnating, Causing Corrosion. Matches Your Lower Unit To Ensure No Discernible Drag Or Compromise In Performance..
Features
- Great Compatibility 27341 SkegGuard kit is perfectly compatible with Evinrude / Johnson 40 - 50 hp 4 Stroke 1999-2003, Mercury / Mariner 40 hp / 50 hp / 60 hp 2 & 4 Stroke 2003-Present. Also available for many selected inboard/outboard engines such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo and Yamaha engines. Replace OE Part Number: 27341
- Skeg Guard & Broken Skeg Fixer Indispensable SkegGuard not only protects motor s skeg from damage, also quickly fixes broken skeg with as little as 2-3 inches of skeg remaining. Meanwhile, perfect design with drain hole in the bottom to prevent water from collecting and stagnating, causing corrosion. Matches your lower unit to ensure no discernible drag or compromise in performance.
- Built for Marine Environment Keel Guard Constructed of high quality marine-grade 316 stainless steel material with an extra reinforced 3mm lower wear tab across the bottom. Protect against ramp dragging or damage from hidden debris. Corrosion resistance and resist damage. Stable, reliable and long-lasting durability.
- Easy to Install It takes a breeze to install. Simply slide and match the skeg guard to the skeg. Use mallet for proper fit. Drill through with 1/4 holes. Install hardwares with hex wrenches provided. Then, you re ready to go. Comes with stainless steel self locking hardware and hex wrenches. Please make sure the model fits well with the skeg on your motor before purchase.
- 100% Satisfaction Guarantee Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty.
- See more on Amazon...
Brand: sixcow | Manufacturer: sixcow
Warranty: 30-Day money-back guarantee, 12-Month warranty for quality-related issues
See On Amazon #4
MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging and Wear and Tear - Skeg Protector - Easy to Install - Fits Mercury Mariner - See Listing for Fitment Details
Asin: B005BI6BDQ | Model: 27211 | PartNumber: 27211 | Ean: 0672057272114 | UPC: 672057272114
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27211 For Mercury 75-90-115Hp Command Thrust, Seapro 2014-Present, 135-150-175-200-225Hp 4 Stroke & Verado 2005-2018, 150Hp 4 Stroke, Proxs, Seapro 2019-Present. Fits Mercury 200-225-250Hp 2 Stroke Optimax And Proxs (No Torquemaster) 1999-2018, 200-250-300Hp 4 Stroke Pro Verado 4.8" Gearcase 2015-2018.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27211 for Mercury 75-90-115hp Command Thrust, SeaPro 2014-Present, 135-150-175-200-225hp 4 Stroke & Verado 2005-2018, 150hp 4 Stroke, ProXS, SeaPro 2019-Present. Fits Mercury 200-225-250hp 2 Stroke Optimax and ProXS (No Torquemaster) 1999-2018, 200-250-300hp 4 Stroke PRO Verado 4.8 Gearcase 2015-2018
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 20.00 x 1.25 x 9.00 inches | Weight: 1.70 Pounds
Warranty: Warranty
See On Amazon #5
MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Fits Mercury: 75-90-115hp 4 St. 2015-Present & 150-175hp 2 Stroke, Optimax & Pro XS 1978-2018
Asin: B005BI676C | Model: 27061 | PartNumber: 27061 | Ean: 0672057270615 | UPC: 672057270615
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27061 For Mercury: 75-90-115 4 Stroke 2.07" Ratio 2015-Present / 150-175 Optimax & Pro Xs 2001-2018. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27061 for Mercury: 75-90-115 4 Stroke 2.07 Ratio 2015-Present / 150-175 Optimax & Pro XS 2001-2018. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
First Available: 10/17/2017
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 20.00 x 1.25 x 9.00 inches | Weight: 1.60 Pounds
Warranty: Warranty
See On Amazon #6
Megaware SkegGuard with Drain Hole - Protects Against Ramp Dragging - Fits Yamaha VMAX SHO 200-225-250 4 Stroke 2009-Present (20" L Models Only) & 200-225-250-300hp 2 Stroke VMAX HPDI 2005-2010
Asin: B01CZ2YCLS | Model: 27041 | PartNumber: 27041 | Ean: 0672057270417 | UPC: 672057270417
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27041 For Yamaha: Vmax Sho 200-225-250 4 Stroke (20" La Models) / Vmax Hpdi: 200-225-250-300 2 Stroke 2005-2010. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27041 for Yamaha: VMAX SHO 200-225-250 4 Stroke (20 LA Models) / VMAX HPDI: 200-225-250-300 2 Stroke 2005-2010. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 2.00 x 20.00 x 9.00 Inches
Warranty: Warranty
See On Amazon #7
MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging and Everyday Wear and Tear - Skeg Protector - Easy to Install - Fits Mercury MerCruiser Alpha 1 Generation 2 1991-Present
Asin: B005BI65UA | Model: 27031 | PartNumber: 27031 | Ean: 0672057270318 | UPC: 672057270318
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27031 For Mercury Mercruiser: Alpha 1 Generation 2 1991-Present. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27031 for Mercury MerCruiser: Alpha 1 Generation 2 1991-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
First Available: 10/17/2017
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 20.00 x 1.25 x 9.00 inches | Weight: 1.50 Pounds
See On Amazon #8
Megaware Keelguard SkegGuard with Drain Hole - Protects Against Ramp Dragging Skeg Protector Fits Yamaha 150-175HP 2 & 4 Stroke 1984-Present, 200HP 4 St. Inline 4 2012-Present, 350 4 St. 2007-Present
Asin: B005BI69J2 | Model: 27151 | PartNumber: 27151 | Ean: 0672057271513 | UPC: 672057271513
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27151 For Yamaha 150-175Hp 2 & 4 Stroke 1984-Present, 200Hp 4 St. Inline 4 2012-Present, 350 4 St. 2007-Present. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27151 for Yamaha 150-175HP 2 & 4 Stroke 1984-Present, 200HP 4 St. Inline 4 2012-Present, 350 4 St. 2007-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
First Available: 10/17/2017
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 20.00 x 1.25 x 9.00 Inches | Weight: 1.60 pounds
Warranty: Warranty.
See On Amazon #9
35-SS625 Skeg Guard Damaged Skeg Repair Cover Fit for Mercury/Mariner, Honda, Yamaha, Nissan, Tohatsu, and Force Models Outboard Safe-Skeg Protector
Asin: B0C27ZWX2R | Model: 35-SS625 | PartNumber: 35-SS625
【Skeg Protection & Repair】35-Ss625 Safe-Skeg A Bolt-On Steel Cover, Attaches To The Existing Lower Unit Skeg To Bring Back The Original Skeg Performance, Handling, And Appearance..
【Easier Way】 35-Ss625 Skeg Guard Protector Kit Includes Skeg Mounting Hardware, An Allen Wrench, And Thread-Locking Adhesive. It Takes About 10 Minutes For Installation, You Only Need Conventional Hammers And Air Drills To Tap The Skeg Guard Into The Right Place And Finish The Drilling Work..
【Marine Grade Stainless Steel】Polished Finish Skeg Guard 1.5Mm Material Thickness, Made Of Marine Grade Stainless Steel, Excellent Material To Protect The New Skeg That Offers More Durable, Stable Structures Metal Cover..
【Wide Application】35-Ss625 Safe-Skeg Universal Skeg Repair Compatible With Other Brands Outboards: (1) Nissan 70 90 115 120 140 2-Stroke Outboard(1993-2010) ; (2) For Tohatsu 70 90 115 120 140 2-Stroke Outboard(1993+ ) ; (3) For Yamaha 60 70 80 90 100 2 & 4-Stroke Outboard(1998-2001); (4) For Honda 75 90 115 4-Stroke Outboard(1995-2007)..
Features
- Wide Application 35-SS625 skeg guard universal fit for Mercury/Mariner 2 & 4 -stroke Outboard 50 60 Big Foot (2003+); 70 75 80 Outboard (1984+ ); 70 90 100 115 125 Optimax Outboard (1983+ ); For Force Outboard 70 90 made by Mercury (1998-2002).
- Wide Application 35-SS625 safe-skeg universal skeg repair compatible with other brands outboards: (1) Nissan 70 90 115 120 140 2-stroke Outboard(1993-2010) ; (2) For Tohatsu 70 90 115 120 140 2-stroke Outboard(1993+ ) ; (3) For Yamaha 60 70 80 90 100 2 & 4-stroke Outboard(1998-2001); (4) For Honda 75 90 115 4-stroke Outboard(1995-2007).
- Skeg Protection & Repair 35-SS625 safe-skeg a bolt-on steel cover, attaches to the existing lower unit skeg to bring back the original skeg performance, handling, and appearance.
- Marine Grade Stainless Steel Polished finish skeg guard 1.5mm material thickness, made of marine grade stainless steel, excellent material to protect the new skeg that offers more durable, stable structures metal cover.
- Easier way 35-SS625 skeg guard protector kit includes skeg mounting hardware, an Allen wrench, and thread-locking adhesive. It takes about 10 minutes for installation, you only need conventional hammers and air drills to tap the skeg guard into the right place and finish the drilling work.
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
Dimensions: 1.10 x 12.60 x 7.50 Inches
See On Amazon #10
MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Fits Mercury 200-225-250-300HP 4 Stroke ProXS Torque Master, 4.6L V8 4.8" Torpedo, 2019-Present
Asin: B07RP282TS | Model: 27412 | PartNumber: 27412 | Ean: 0672057274125 | UPC: 672057274125
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27412 For Mercury: 200-225-250-300Hp 4.6L V8 Proxs Torque Master 4.8” Gearcase, 20" Shaft, 2019-Present. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27412 for Mercury: 200-225-250-300HP 4.6L V8 ProXS Torque Master 4.8 Gearcase, 20 Shaft, 2019-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD
Dimensions: 0.25 x 16.00 x 5.50 Inches
Warranty: Warranty
See On Amazon #11
27061 Skeg Guard Stainless Steel Protective Skeg for Mercury 75HP 90HP 115HP 4 Stroke 2015-Present /150HP 175HP Optimax & Pro XS 2001-2018 Equipment Safe-Skeg
Asin: B0BYYS916H | Model: 27061 Skeg Guard | PartNumber: 27061 Skeg Guard
Easy To Install : With No Welding And No Epoxies Required, Replaces A Broken Skeg With As Little As 2-3 Inches Of Skeg Remaining.Our Inboard/Outboard Skeg Protector Installs In As Little As 10 Minutes! Built For A Custom Fit To The Motor, Just Slide And Tap It Into Place, Drill Your Holes And Tighten The Locking Bolts..
Satisfaction Service : If You Are Not Satisfied With Our Products.You Can Request A Full Refund Within 30 Days And Support A 12 Month Warranty.Professional And Sincere Service Allows You To Purchase Without Risk!.
High Quality : Made Of Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, Comes With Male & Female Stainless Locking Screws & Loctite..
Advantage : The Product Is Designed To Prevent And Reduce Wear, And The Amount Of Damage Encountered While Hitting Minor Floating Objects Or Submerged Stumps And Rocks. It Can Cover An Already Damaged Skeg,Also Includes A Drain Hole To Prevent Corrosion..
Features
- Application : 27061 Skeg Guard For Mercury 75HP 90HP 115HP 4 Stroke 2.07" Ratio 2015-Present And 150HP 175HP Optimax & Pro XS 2001-2018 Replace part number 27061 .
- Advantage : The product is designed to prevent and reduce wear, and the amount of damage encountered while hitting minor floating objects or submerged stumps and rocks. It Can Cover an Already Damaged Skeg,Also includes a drain hole to prevent corrosion.
- Easy to install : With no welding and no epoxies required, Replaces a Broken Skeg with as Little as 2-3 Inches of Skeg Remaining.our inboard/outboard skeg protector installs in as little as 10 minutes! Built for a custom fit to the motor, just slide and tap it into place, drill your holes and tighten the locking bolts.
- High quality : Made of Mirror-POLISHED 18-Gauge Marine-Grade 316 Stainless Steel, Comes with Male & Female Stainless Locking Screws & Loctite.
- Satisfaction service : If you are not satisfied with our products.You can request a full refund within 30 days and support a 12 month warranty.Professional and sincere service allows you to purchase without risk!
- See more on Amazon...
Brand: sevencow | Manufacturer: Sevencow LLC USA
Warranty: guarantee with 12 month's warranty
See On Amazon #12
27021 Stainless Steel Skeg Guard Fix Damaged Skeg Fit for Mercury Mercruiser Alpha I 1985-1990
Asin: B0BXNYF65X | Model: 27021 Skeg Guard | PartNumber: 27021 Skeg Guard
Perfect Design – Design For Your Skeg, Drain Hole Prevents Against Corrosion/Freezing For Longer Wear. No Discernable Drag, Won't Compromise Performance, Avoid Expensive Repair Costs..
Satisfaction Guarantee - Besttruck Values Customers Shopping Experience And Provides Customers With A Good Shopping Environment. If You Are Not Satisfied With The Product, You Can Choose To Return It, We Support A 30-Day Full Refund And A One-Year Warranty..
Superior Material – Made Of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror Polished To Improve The Gloss Of The Surface, Prevent Rust And Corrosion, Durable And Long Service Life. Meeting Or Exceeding Oem Specification..
Function – Protects Your Skeg From Corrosion And Wear In The Harsh Marine Environment. Thickened 3Mm Lower Wear Tab Reduces Ramp Dragging And Is Ideal For River Running. It Will Be Stronger And Much More Affordable Than Welding And Replacing A Lower Skeg..
Features
- Application - Fits for Mercury Mercruiser Alpha I 1985-1990. Replace for part 27021.
- Function Protects your skeg from corrosion and wear in the harsh marine environment. Thickened 3mm lower wear tab reduces ramp dragging and is ideal for river running. It will be stronger and much more affordable than welding and replacing a lower skeg.
- Perfect Design Design for your skeg, drain hole prevents against corrosion/freezing for longer wear. No discernable drag, won't compromise Performance, avoid expensive repair costs.
- Superior Material Made of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror polished to improve the gloss of the surface, prevent rust and corrosion, durable and long service life. Meeting or exceeding OEM specification.
- Satisfaction Guarantee - Besttruck values customers shopping experience and provides customers with a good shopping environment. If you are not satisfied with the product, you can choose to return it, we support a 30-day full refund and a one-year warranty.
- See more on Amazon...
Brand: besttruck | Manufacturer: besttruck
Dimensions: 1.26 x 11.30 x 7.28 Inches
Warranty: 1 year warranty
See On Amazon #13
35-SS625 Skeg Guard Safe-Skeg Protector Tool Kit Marine-Grade Stainless Steel Replacement for Yamaha Honda Mercury/Mariner Force Nissan Tohatsu Outboard Engines
Asin: B0C1YJ9N9N | Model: YK230410 | PartNumber: YK230410
【Easy Installation】Secures With Self-Locking Hardware And Installs In As Little As 10 Minutes. It Can Be Installed With As Little As 2-3 Inches Of Skeg Remaining, Suitable For Repairing A Broken Skeg. Package Comes With Male & Female Locking Screws, Allen Wrench, And Loctite 262..
【Ultimate Skeg Protection】The Safe-Skeg Is A Marine-Grade Stainless Steel Protector That Installs Over The Engine's Original Skeg. Use To Protect Your New Skeg From Damage, Or To Repair An Impact-Damaged Or Chipped Skeg For Better Performance..
【Satisfaction Guarantee】Bonbo Committed To Providing Customers With A Good Product Experience, If You Are Not Satisfied With Our Products, Simply Return It For A Full Refund In 30 Days. We Support 12 Months’ Warranty..
【Premium Material】Constructed From Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, 1/16" Thick Material, Seamlessly Engineered For Strength And Durability, The Skeg Guard Is Built To Withstand The Elements And Provide Long-Lasting Protection..
【Protect Your Skeg From Harsh Ocean Environment】Skeg Protector Kit Prevents Dragging On Ramps And Is Perfect For River Riding Without Compromising Performance. Additionally, It Has A Drain Hole To Prevent Corrosion Or Freezing..
Features
- Wide Application The Safe-Skeg fits the following outboard engines: for Force 70-90 HP(Mercury) 2-Stroke 1998-2002, for Honda 75-90-115 HP 4-Stroke 1995-2007, for Mercury/Mariner 50-60 HP (Big Foot) 2 & 4-Stroke 2003+, for Mercury/Mariner 70-75-80 HP 2-Stroke 1984+, for Mercury/Mariner 70-90-100-115-125 HP Optimax 2-Stroke 1983+, for Nissan/Tohatsu 70-90-115-120-140 HP 2-Stroke 1993+, for Yamaha 60-70-80-90-100 HP 2 & 4 Stroke 1998-2001.
- Protect Your Skeg From Harsh Ocean Environment Skeg Protector Kit prevents dragging on ramps and is perfect for river riding without compromising performance. Additionally, it has a drain hole to prevent corrosion or freezing.
- Easy Installation Secures with self-locking hardware and installs in as little as 10 minutes. It can be installed with as little as 2-3 inches of skeg remaining, suitable for repairing a broken skeg. Package comes with male & female locking screws, allen wrench, and Loctite 262.
- Premium Material Constructed from mirror-polished 18-gauge marine-grade 316 stainless steel, 1/16 thick material, seamlessly engineered for strength and durability, the Skeg Guard is built to withstand the elements and provide long-lasting protection.
- Ultimate Skeg Protection The Safe-Skeg is a marine-grade stainless steel protector that installs over the engine's original skeg. Use to protect your new skeg from damage, or to repair an impact-damaged or chipped skeg for better performance.
- Satisfaction Guarantee Bonbo committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months Warranty.
- See more on Amazon...
Brand: Bonbo | Manufacturer: Bonbo
Dimensions: 0.30 x 11.00 x 5.10 Inches
See On Amazon #14
Megaware SkegGuard with Drain Hole - Protects Against Ramp Dragging - Fits Yamaha 200hp 4 Str V6 2002-2018, 200 & 250 VMAX SHO 25" Shaft 2015-Present, 225-250hp 1997-Present, 300 4st 2010-Pres.
Asin: B005BIE426 | Model: 27321 | PartNumber: 27321 | Ean: 0672057273210 | UPC: 672057273210
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27301 For Yamaha 200Hp 4 Stroke V6 2002-2018, 225Hp 2/4 Stroke 1997-Present, 200 & 250Hp Vmax Sho 25" 2015-Present. Fits Yamaha: 250Hp 2 & 4 Stroke 1990-Present, 300Hp 2 Stroke 2004-2006, 300Hp 4 Stroke 2010-Present.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27301 for Yamaha 200hp 4 Stroke V6 2002-2018, 225hp 2/4 Stroke 1997-Present, 200 & 250hp VMAX SHO 25 2015-Present. Fits YAMAHA: 250hp 2 & 4 Stroke 1990-Present, 300hp 2 Stroke 2004-2006, 300hp 4 Stroke 2010-Present
- See more on Amazon...
First Available: 10/17/2017
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 20.00 x 1.25 x 9.00 Inches
Warranty: Warranty
See On Amazon #15
MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Easy to Install - Mercury Mariner 40-50-60hp 2 & 4 Stroke, 3.44" Torpedo, 1991-Present
Asin: B00HBX48SY | Model: 27341 | PartNumber: 27341 | Ean: 0672057273418 | UPC: 672057273418
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27341 For Mercury: 40-50-60Hp 2 & 4 Stroke 2003-Present (See Model 27071 For Bigfoot, Command Thrust). Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27341 for Mercury: 40-50-60HP 2 & 4 Stroke 2003-Present (See Model 27071 for Bigfoot, Command Thrust). Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 20.00 x 12.00 x 90.00 Inches | Weight: 1.00 Pounds
Warranty: Warranty
See On Amazon #16
Megaware SkegGuard with Drain Hole - Protects Against Ramp Dragging - Fits Yamaha 200hp 4 Str V6 2002-2018, 200 & 250 VMAX SHO 25" Shaft 2015-Present, 225-250hp 1997-Present, 300 4st 2010-Pres
Asin: B00AJVNO8A | Model: 27301 | PartNumber: 27301 | Ean: 0672057273012 | UPC: 672057273012
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27301 For Yamaha 200Hp 4 Stroke V6 2002-2018, 225Hp 2/4 Stroke 1997-Present, 200 & 250Hp Vmax Sho 25" 2015-Present. Fits Yamaha: 250Hp 2 & 4 Stroke 1990-Present, 300Hp 2 Stroke 2004-2006, 300Hp 4 Stroke 2010-Present.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27301 for Yamaha 200hp 4 Stroke V6 2002-2018, 225hp 2/4 Stroke 1997-Present, 200 & 250hp VMAX SHO 25 2015-Present. Fits YAMAHA: 250hp 2 & 4 Stroke 1990-Present, 300hp 2 Stroke 2004-2006, 300hp 4 Stroke 2010-Present
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 20.00 x 1.25 x 9.00 Inches | Weight: 1.60 Pounds
Warranty: Warranty
See On Amazon #17
MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Easy to Install - Fits Mercury, Force, Honda, Nissan/Tohatsu - See Listing for Motor Fitment Details
Asin: B005BI67OO | Model: 27071 | PartNumber: 27071 | Ean: 0672057270714 | UPC: 672057270714
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27071 For Mercury. Force, Honda, Nissan/Tohatsu - See Listing For Motor Fitment Details. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27071 for Mercury. Force, Honda, Nissan/TOHATSU - See Listing for Motor Fitment Details. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 20.00 x 1.25 x 9.00 Inches | Weight: 1.40 Pounds
Warranty: Warranty
See On Amazon #18
35-SS645 Skeg Guard for Mercury Yamaha Suzuki Marine Engines Marine-Grade Stainless Steel Panther Safe-Skeg
Asin: B0C2P76TR2 | Model: 35-SS645 Skeg Guard | PartNumber: 35-SS645 Skeg Guard
High Quality : Made Of Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, Durable And Corrosion-Resistant..
Kit Includes: 1*Safe-Skeg, 2*Allen Wrench, Male & Female Stainless Locking Screws, Loctite..
Easy To Install : With No Welding And No Epoxies Required, Replaces A Broken Skeg With As Little As 2-3 Inches Of Skeg Remaining.Our Inboard/Outboard Skeg Protector Installs In As Little As 10 Minutes! Built For A Custom Fit To The Motor, Just Slide And Tap It Into Place, Drill Your Holes And Tighten The Locking Bolts..
Advantage : The Product Is Designed To Prevent And Reduce Wear, And The Amount Of Damage Encountered While Hitting Minor Floating Objects Or Submerged Stumps And Rocks. It Can Cover An Already Damaged Skeg,Also Includes A Drain Hole To Prevent Corrosion..
Features
- Application : 35-SS645 Skeg Guard Protector For Mercury 150 Optimax 2Stroke 2014,For Suzuki Outboard 150-175-200-225 2 1986-2022 / 150-175-200-225 4Stroke 2003-Present / 250SS & 300 4Stroke 2006-2011. Also For Yamaha Outboard 115-130 2 Stroke 1984-2002, 150 4Stroke 1984-Present,175-200-225-250 2Stroke 1984-2002,350 4 2009-Present,3.0L thru 5.7L 1989-1993. Replace part number 35-SS645
- Advantage : The product is designed to prevent and reduce wear, and the amount of damage encountered while hitting minor floating objects or submerged stumps and rocks. It Can Cover an Already Damaged Skeg,Also includes a drain hole to prevent corrosion.
- High quality : Made of Mirror-POLISHED 18-Gauge Marine-Grade 316 Stainless Steel, Durable and corrosion-resistant.
- Easy to install : With no welding and no epoxies required, Replaces a Broken Skeg with as Little as 2-3 Inches of Skeg Remaining.our inboard/outboard skeg protector installs in as little as 10 minutes! Built for a custom fit to the motor, just slide and tap it into place, drill your holes and tighten the locking bolts.
- Kit Includes: 1*Safe-Skeg, 2*Allen Wrench, Male & Female Stainless Locking Screws, Loctite.
- See more on Amazon...
Brand: sevencow | Manufacturer: Sevencow LLC USA
Warranty: 12 months’ Warranty
See On Amazon #19
27021 Skeg Guard Fix Damaged Skeg for Mercury Alpha 1 1985-1990 Marine-Grade Stainless Steel
Asin: B0BXH4WPJD | Model: 27021 Skeg Guard | PartNumber: 27021 Skeg Guard
Easy To Install : With No Welding And No Epoxies Required, Replaces A Broken Skeg With As Little As 2-3 Inches Of Skeg Remaining.Our Inboard/Outboard Skeg Protector Installs In As Little As 10 Minutes! Built For A Custom Fit To The Motor, Just Slide And Tap It Into Place, Drill Your Holes And Tighten The Locking Bolts..
Satisfaction Service : If You Are Not Satisfied With Our Products.You Can Request A Full Refund Within 30 Days And Support A 12 Month Warranty.Professional And Sincere Service Allows You To Purchase Without Risk!.
High Quality : Made Of Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, Comes With Male & Female Stainless Locking Screws & Loctite..
Advantage : The Product Is Designed To Prevent And Reduce Wear, And The Amount Of Damage Encountered While Hitting Minor Floating Objects Or Submerged Stumps And Rocks. It Can Cover An Already Damaged Skeg,Also Includes A Drain Hole To Prevent Corrosion..
Features
- Application : 27021 Skeg guard For Mercury Mercuriser Alpha 1 1985 1986 1987 1988 1989 1990.(Replace part number 27021)
- Advantage : The product is designed to prevent and reduce wear, and the amount of damage encountered while hitting minor floating objects or submerged stumps and rocks. It Can Cover an Already Damaged Skeg,Also includes a drain hole to prevent corrosion.
- Easy to install : With no welding and no epoxies required, Replaces a Broken Skeg with as Little as 2-3 Inches of Skeg Remaining.our inboard/outboard skeg protector installs in as little as 10 minutes! Built for a custom fit to the motor, just slide and tap it into place, drill your holes and tighten the locking bolts.
- High quality : Made of Mirror-POLISHED 18-Gauge Marine-Grade 316 Stainless Steel, Comes with Male & Female Stainless Locking Screws & Loctite.
- Satisfaction service : If you are not satisfied with our products.You can request a full refund within 30 days and support a 12 month warranty.Professional and sincere service allows you to purchase without risk!
- See more on Amazon...
Brand: sevencow | Manufacturer: Sevencow LLC USA
Warranty: 12 month warranty
See On Amazon #20
Megaware SkegPro 655 - Protects Against Damage from Ramp Dragging, Rocks, Debris and Submerged Objects - Stainless Steel Skeg Protector - Fits Mercruiser, Mercury, Suzuki, and Yamaha Motors
Asin: B0000AXU49 | Model: 2655 | PartNumber: 2655 | Ean: 0672057026557 | UPC: 672057026557
Strong And Reliable - The Skeg Cover Is Made From 18 Gauge Marine Grade 304 Stainless Steel With Self-Locking Hardware And A Mirror-Polished Finish. The Easy Do-It-Yourself Application Ensures You'll Have Your Skegpro Installed In Less Than 10 Minutes.
A Commitment To Excellence - Megaware Keelguard Is A Family-Owned Business That Revolutionized The Keel Protection Industry With Its Patented, Do-It-Yourself Keel Protector In 1992. We Offer A Range Of High-Quality Products To Keep Innovating And Providing Top-Notch Support For Your Investment..
Designed For Specific Motors - Fits Mercruiser: Pre Alpha 1 Drives 1973-1984; Alpha 1 1985-1990; Alpha 1 Gen 2 1991-Present, Mercury/Mariner: 40-50-60Hp Bigfoot & Command Thrust 2001-Present; 75-90-115 2&4 Stroke 1984 -Present 3.44” Torpedo; 150-175 Optimax, Proxs 1978 -2018, Mercury: 125-135 2 Stroke 1986-2012; Suzuki: 150-175-200-225Hp 2&4 Stroke 1986-Present (No As, Ss); Df250t 2004-Present (No Ss Or Ap Models), And Yamaha: 200 4 Stroke V6 2002-2018; 225-250Hp 2&4 Stroke 1997-Present; 200-250 Vmax Sho 25” 2015-Present; 300Hp 4 Stroke 2010-Present.
Proper Protection - Our Guard Helps Prevent Corrosion And Freezing On Your Skeg; It Also Features A Drain Hole At The Bottom To Prevent Water From Collecting To Ensure Your Boat Doesn't Become Stagnant.
Features
- Skeg Protector - Reduce wear and tear while protecting your skeg against damage from ramp dragging, rocks, debris, and submerged objects with the Megaware SkegPro - the makers of the original KeelGuard
- Proper Protection - Our guard helps prevent corrosion and freezing on your skeg; it also features a drain hole at the bottom to prevent water from collecting to ensure your boat doesn't become stagnant
- Strong and Reliable - The skeg cover is made from 18 gauge marine grade 304 stainless steel with self-locking hardware and a mirror-polished finish. The easy do-it-yourself application ensures you'll have your SkegPro installed in less than 10 minutes
- Designed for Specific Motors - Fits Mercruiser: Pre Alpha 1 Drives 1973-1984; Alpha 1 1985-1990; Alpha 1 Gen 2 1991-Present, Mercury/Mariner: 40-50-60hp Bigfoot & Command Thrust 2001-Present; 75-90-115 2&4 Stroke 1984 -Present 3.44 Torpedo; 150-175 Optimax, Proxs 1978 -2018, Mercury: 125-135 2 Stroke 1986-2012; Suzuki: 150-175-200-225hp 2&4 Stroke 1986-Present (No AS, SS); DF250T 2004-Present (No SS or AP Models), and Yamaha: 200 4 Stroke V6 2002-2018; 225-250hp 2&4 Stroke 1997-Present; 200-250 Vmax Sho 25 2015-Present; 300hp 4 Stroke 2010-Present
- A Commitment to Excellence - Megaware KeelGuard is a family-owned business that revolutionized the keel protection industry with its patented, do-it-yourself keel protector in 1992. We offer a range of high-quality products to keep innovating and providing top-notch support for your investment.
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 1.00 x 15.80 x 5.30 Inches | Weight: 0.75 Pounds
See On Amazon
Looking For Something Else?
Search