Amana Tool 46199-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/2 D x 2 CH x 1/2 SHK x 4 Inch Long Router Bit
Asin: B07FW336SX | Model: 46199-K | PartNumber: 46199-K | Ean: 0738685951996 | UPC: 738685951996
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Specifications: (D) Diameter: 1/8 (B) Cutting Height: 13/16 (D) Shank: 1/8 Overall Length (L): 2-1/2 B1: 7/32 Type: Naco Ceramic Coating Flutes: 2.
Solid Carbide.
Features
- Made in the USA
- Solid Carbide
- SPECIFICATIONS: (D) Diameter: 1/8 (B) Cutting Height: 13/16 (d) Shank: 1/8 Overall Length (L): 2-1/2 B1: 7/32 Type: nACo Ceramic Coating Flutes: 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.34 pounds
See On Amazon Similar To Amana Tool 46199K CNC SC
#1
Amana Tool 46170-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/4 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long 2 Flute Router Bit
Asin: B072562878 | Model: 46170-K | PartNumber: 46170-K | Ean: 0738685994610 | UPC: 738685994610
(D) Shank: 1/4.
B1: 7Mm.
1 Amana Branded Tool.
Overall Length (L): 2-1/2.
(B) Cutting Height: 7/8.
Features
- (D) diameter: 1/4
- (B) Cutting height: 7/8
- (D) shank: 1/4
- Overall length (L): 2-1/2
- B1: 7mm
- 1 Amana Branded Tool
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.25 x 2.50 x 0.25 inches
See On Amazon #2
Amana Tool - 46473 CNC 2D & 3D Carving 6.2 Deg Tapered Angle Ball Tip x 0.5mm Dia x 0.25
Asin: B07BRZDQ5J | Model: 46473 | PartNumber: 46473 | Ean: 0738685464731 | UPC: 738685464731
Helps To Prevent The Build-Up Of Material In The Flutes While Cutting Have The Tendency To Run/Spin Much Faster Than An Uncoated Tool..
Reduces Chatter (Where The Machine Or Work Piece Vibrates) Under High Chip Loads (When Used With Low Tir Spindles)..
Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding..
Benefits Of Zirconium Nitride (Zrn) Coating Creates A Harder And Tougher Cutting Edge Allows For A Prolonged Cutting Edge Life..
Features
- Made in the USA. Solid Carbide.
- Benefits of Zirconium Nitride (ZrN) Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life.
- Helps to prevent the build-up of material in the flutes while cutting Have the tendency to run/spin much faster than an uncoated tool.
- Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding.
- Reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles).
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #3
Amana Tool - 46172-K (Previous# 46162) CNC Solid Carbide Spektra Extreme Tool Life C
Asin: B07F6NY9BS | Model: 46172-K | PartNumber: 46172-K | Ean: 0738685446171 | UPC: 738685446171
(D) Shank: 3/8.
B1: 9Mm.
1 Amana Branded Tool.
Overall Length (L): 3.
(B) Cutting Height: 1-1/4.
Features
- (D) diameter: 3/8
- (B) Cutting height: 1-1/4
- (D) shank: 3/8
- Overall length (L): 3
- B1: 9mm
- 1 Amana Branded Tool
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.60 x 3.50 x 0.60 inches | Weight: 0.00 pounds
See On Amazon #4
Amana Tool - 46286-K CNC 2D & 3D Carving 3.6 Deg Tapered Angle Ball Tip 1/8 Dia x 1/16 R
Asin: B07413K89F | Model: 46286-K | PartNumber: 46286-K | Ean: 0738685999868 | UPC: 738685999868
(A°) Angle: 3.6°.
(D) Shank: 1/4.
(B) Cutting Height: 1.
(R) Radius: 1/16.
Features
- (D) diameter: 1/8
- (R) radius: 1/16
- (A ) angle: 3.6
- (B) Cutting height: 1
- (D) shank: 1/4
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #5
Amana Tool 46213-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/16 Dia x 1/4 CH x 1/8 SHK 2 Inch Long Down-Cut Router Bit
Asin: B07LGVC86J | Model: 46213-K | PartNumber: 46213-K | Ean: 0738685462331 | UPC: 738685462331
Specifications: Direction: Down-Cut (D) Diameter: 1/8 (B) Cutting Height: 1/2 (D) Shank: 1/4 Overall Length (L): 2 Flutes: 2.
Features
- Made in the USA
- SPECIFICATIONS: Direction: Down-Cut (D) Diameter: 1/8 (B) Cutting Height: 1/2 (d) Shank: 1/4 Overall Length (L): 2 Flutes: 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.50 x 2.75 x 0.50 inches
See On Amazon #6
Amana Tool 46403-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/16 Dia x 1/2 CH x 1/4 SHK 2 Inch Long Down-Cut Router Bit
Asin: B084HJN9GG | Model: 46403-K | PartNumber: 46403-K | Ean: 0738685333365 | UPC: 738685333365
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.04 pounds
See On Amazon #7
Amana Tool 46179-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 3/8 D x 1-5/8 CH x 3/8 SHK x 3-1/2 Inch Long 2 Flute Router Bit
Asin: B07NNYDTB9 | Model: 46179-K | PartNumber: 46179-K | Ean: 0738685461792 | UPC: 738685461792
Solid Carbide.
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.18 pounds
See On Amazon #8
Amana Tool - 46171-K (Previous# 46167) CNC Solid Carbide Spektra Extreme Tool Life C
Asin: B07FPQ6YD1 | Model: 46171-K | PartNumber: 46171-K | Ean: 0738685461716 | UPC: 738685461716
(D) Shank: 3/8.
B1: .200".
Overall Length (L): 3.
(B) Cutting Height: 7/8.
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #9
Amana Tool 46176-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/8 D x 13/16 CH x 1/4 SHK x 2-1/2 Inch Long Router Bit
Asin: B07MXHH2GB | Model: 46176-K | PartNumber: 46176-K | Ean: 0738685004616 | UPC: 738685004616
Specifications: (D) Diameter: 1/8 (B) Cutting Height: 13/16 (D) Shank: 1/8 Overall Length (L): 2-1/2 B1: 7/32 Type: Naco Ceramic Coating Flutes: 2.
Solid Carbide.
Features
- Made in the USA
- Solid Carbide
- SPECIFICATIONS: (D) Diameter: 1/8 (B) Cutting Height: 13/16 (d) Shank: 1/8 Overall Length (L): 2-1/2 B1: 7/32 Type: nACo Ceramic Coating Flutes: 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.06 pounds
See On Amazon #10
Amana Tool - 46180-K CNC Solid Carbide Spektra Extreme Tool Life Coated Compression Spiral
Asin: B073Y6X383 | Model: 46180-K | PartNumber: 46180-K | Ean: 0738685461846 | UPC: 738685461846
(D) Shank: 1/8.
B1: 7/32.
Overall Length (L): 2-1/2.
(B) Cutting Height: 13/16.
Features
- (D) diameter: 1/8
- (B) Cutting height: 13/16
- (D) shank: 1/8
- Overall length (L): 2-1/2
- B1: 7/32
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.02 pounds
See On Amazon #11
Amana Tool - 46100-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/8 Dia
Asin: B0711T5KZS | Model: 46100-K | PartNumber: 46100-K | Ean: 0738685461105 | UPC: 738685461105
(B) Cutting Height: 1/2.
Overall Length (L): 2.
(D) Shank: 1/4.
(D) Diameter: 1/8.
Features
- Direction: up-cut
- (D) diameter: 1/8
- (B) Cutting height: 1/2
- (D) shank: 1/4
- Overall length (L): 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #12
Amana Tool 46297-K SC Spektra Extreme Tool Life Coated UltraTrim Spiral 1/4 D x 1 CH x 1/4 SHK x 3 Inch Long w/ Double BB Down-Cut Router Bit
Asin: B0CRSMDC99 | Ean: 0738685946299 | UPC: 738685946299
Naco Offers Approximately 4,500 Vickers For Impressive Solid Hardness On Cutting Areas Of The Tool, For An Increase Up To 2.5 Times Compared To Uncoated Bits..
Coating Prevents High Heat And Oxidation Which Is Detrimental To Cutting Tool Performance. Multi-Colored Hues, While Attractive, Will Dissipate Upon Use And Yet Coating Will Remain Fully Effective..
Features
- nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Coating prevents high heat and oxidation which is detrimental to cutting tool performance. Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
- nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #13
Amana Tool 46177-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/4 D x 1-1/4 CH x 1/4 SHK x 3 Inch Long 2 Flute Router Bit
Asin: B07NP256WX | Model: 46177-K | PartNumber: 46177-K | Ean: 0738685461792 | UPC: 738685461792
Solid Carbide.
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #14
Amana Tool 46211-L-K SC Spektra Extreme Tool Life Coated Spiral Plunge 5mm Dia x 1 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit
Asin: B09DLCR1ZY | Ean: 0738685046210 | UPC: 738685046210
For Use With – Spiral Router Bit Can Be Used With Handheld, Table-Mounted Portable Routers, And As Cnc Machine Router Bits..
Solid Carbide – Special Solid Carbide Router Bits Made For Long-Lasting Cutting Edge Performance And Tool Life. Our Spektra Bits Feature A Nanocomposite Coating With Extreme Nanohardness And Heat Resistance..
Cut Clean – Use The Down-Cut Router Bit For Woodworking. Leaves A Smooth Edge On The Surface. Excellent Router Bit For Cutting Wood, Laminate, Melamine, Melamine Particle Board, Mdf, Veneered Plywood..
Spiral Plunge Bit – Make Grooves And Dado Cuts In Particleboard, Plywood, And Laminate With The Spiral Bit. The Spiral-Flute Bits Shearing Action Yields A Clean Accurate Cut While The Augering Action Clears Chips From The Cut..
Features
- Made in the USA
- SPIRAL PLUNGE BIT Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action yields a clean accurate cut while the augering action clears chips from the cut.
- FOR USE WITH Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits.
- CUT CLEAN Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate, Melamine, Melamine Particle Board, MDF, Veneered Plywood.
- SOLID CARBIDE Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a nanocomposite coating with extreme nanohardness and heat resistance.
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.06 Pounds
See On Amazon #15
Amana Tool 46182-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/2 D x 1 CH x 1/2 SHK x 3 Inch Long Router Bit
Asin: B07FW3MGBR | Model: 46182-K | PartNumber: 46182-K | Ean: 0738685444184 | UPC: 738685444184
Specifications: (D) Diameter: 1/8 (B) Cutting Height: 13/16 (D) Shank: 1/8 Overall Length (L): 2-1/2 B1: 7/32 Type: Naco Ceramic Coating Flutes: 2.
Solid Carbide.
Features
- Made in the USA
- Solid Carbide
- SPECIFICATIONS: (D) Diameter: 1/8 (B) Cutting Height: 13/16 (d) Shank: 1/8 Overall Length (L): 2-1/2 B1: 7/32 Type: nACo Ceramic Coating Flutes: 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.26 pounds
See On Amazon #16
Amana Tool 45639-K SC Spektra Extreme Tool Life Coated V-Groove 90 Deg x 1/4 D x 0.116 CH x 1/4 Inch SHK 3-Flute Router Bit
Asin: B07P831YRY | Ean: 0738685456392 | UPC: 738685456392
Specifications: Diameter (D): 1/4 Angle (A): 60 Cutting Height (B): 31/64 Shank (D): 1/4 Overall Length (L): 2 B1: 7/32 Flutes: 3.
1/4 Inch Shank.
Features
- Made in the USA
- 1/4 Inch Shank
- SPECIFICATIONS: Diameter (D): 1/4 Angle (a): 60 Cutting Height (B): 31/64 Shank (d): 1/4 Overall Length (L): 2 B1: 7/32 Flutes: 3
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #17
Amana Tool - 46341-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge For Soli
Asin: B078ZG6GVR | Model: 46341-K | PartNumber: 46341-K | Ean: 0738685446348 | UPC: 738685446348
(B) Cutting Height: 1/2.
Overall Length (L): 2.
(D) Shank: 1/4.
(D) Diameter: 1/8.
Features
- Direction: down-cut
- (D) diameter: 1/8
- (B) Cutting height: 1/2
- (D) shank: 1/4
- Overall length (L): 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.04 pounds
See On Amazon #18
Amana Tool 46476-K SC Spektra Extreme Tool Life Coated Down-Cut Ball Nose Spiral 1/8 R x 1/4 D x 1 CH x 1/4 SHK x 2-1/2 Inch Long Router Bit
Asin: B07RLG57RH | Model: 46476-K | PartNumber: 46476-K | Ean: 0738685467664 | UPC: 738685467664
Specifications: Direction: Down-Cut (D) Diameter: 1/4 (R) Radius: 1/8 (B) Cutting Height: 1 (D) Shank: 1/4 Overall Length (L): 2-1/2 Type: Naco Ceramic Coating Flutes: 2.
Advantages Of Spektra Coating: Naco Coating Is A Micro-Thin Ceramic Coating Which Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Coating Prevents High Heat And Oxidation Which Is Detrimental To Cutting Tool Performance. Multi-Colored Hues, While Attractive, Will Dissipate Upon Use And Yet Coating Will Remain Fully Effective. Multi-Colored Hues, While Attractive, Will Dissipate Upon Use And Y.
Features
- Made in the USA
- Advantages of Spektra Coating: nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Coating prevents high heat and oxidation which is detrimental to cutting tool performance. Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective. Multi-colored hues, while attractive, will dissipate upon use and y
- SPECIFICATIONS: Direction: Down-Cut (D) Diameter: 1/4 (R) Radius: 1/8 (B) Cutting Height: 1 (d) Shank: 1/4 Overall Length (L): 2-1/2 Type: nACo Ceramic Coating Flutes: 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #19
Amana Tool 46216-K CNC SC Spektra Extreme Tool Life Coated Spiral Plunge 1/2 D x 1-1/2 CH x 1/2 SHK x 3-1/2 Inch Long Down-Cut, 3-Flute Router Bit
Asin: B079PB3Q7Y | Model: 46216-K | PartNumber: 46216-K | Ean: 0738685216460 | UPC: 738685216460
Specifications: Direction: Down-Cut (D) Diameter: 1/2 (B) Cutting Height: 1-1/2 (D) Shank: 1/2 Overall Length (L): 3-1/2 Flutes: 3.
Solid Carbide.
Features
- Made in the USA
- Solid Carbide
- SPECIFICATIONS: Direction: Down-Cut (D) Diameter: 1/2 (B) Cutting Height: 1-1/2 (d) Shank: 1/2 Overall Length (L): 3-1/2 Flutes: 3
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search