Proper Spec Plastic SCRIVET Screw Push Rivet Set x2 AWR3994 New
Asin: B07FY63W1G | Model: AWR3994 | PartNumber: AWR3994
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Warranty:Yes.
Manufacturer Part Number: Awr3994.
Brand: Proper Spec | Manufacturer: Proper Spec
See On Amazon Similar To Proper Spec Plastic SCRIVET Screw
#1
Rexka 20 pcs Fender Liner Bumper Cover Splash Shield Bolt Screw for GM 11570498 Ford W716345-S450B Chevy Camaro Cruze Equinox Silverado Malibu Cadillac Buick Edge Escape Explorer F150 Fushion Mustang
Asin: B0BFGFGYYV | Ean: 0658738905571 | UPC: 658738905571
Replaces Gm 11570498 , Ford W716345-S450b, Black Finish 4.2 - 1.41 X 20Mm, 7Mm Indented Hex Head, Loose Washer.
This Is A Very Common Screw Used For Gm Ford Models..
Meet Or Exceed Oem Specifiation. Direct Fitments.
Other Names: Rear Deflector Screw, Side Shield Screw, Wheelhouse Liner Screw, Fender Liner Screw, Wheel Opening Molding Retainer Screw, Front Deflector Retainer Screw, Bracket Screw, End Extension Screw, Lower Shield Screw, Fender Liner Bolt, Center Shield Screw, Deflector Shield Screw, Deflector Screw, Floor Pan Heat Shield Screw, Door Trim Panel Screw, Filler Neck Screw, Pull Handle Screw, Wheel Opening Molding Screw, Lower Shield Retainer Screw, Backup Lamp Screw, Energy Absorber Screw, Rear Shield Screw, Under Cover Screw, Center Support Retainer Screw, Inner Support Screw, Valance Panel Screw, Radiator Support Air Duct Screw, Radiator Support Splash Shield Screw..
Features
- Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw
- Other Names: Rear Deflector Screw, Side Shield Screw, Wheelhouse Liner Screw, Fender Liner Screw, Wheel Opening Molding Retainer Screw, Front Deflector Retainer Screw, Bracket Screw, End Extension Screw, Lower Shield Screw, Fender Liner Bolt, Center Shield Screw, Deflector Shield Screw, Deflector Screw, Floor Pan Heat Shield Screw, Door Trim Panel Screw, Filler Neck Screw, Pull Handle Screw, Wheel Opening Molding Screw, Lower Shield Retainer Screw, Backup Lamp Screw, Energy Absorber Screw, Rear Shield Screw, Under Cover Screw, Center Support Retainer Screw, Inner Support Screw, Valance Panel Screw, Radiator Support Air Duct Screw, Radiator Support Splash Shield Screw.
- Replaces GM 11570498 , Ford W716345-S450B, Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer
- Meet or Exceed OEM Specifiation. Direct Fitments
- This is a very common screw used for GM Ford Models.
- See more on Amazon...
Brand: Rexka | Manufacturer: Yontao
See On Amazon #2
Rexka 50pcs Fender Liner Splash Shield Wheelhouse Liner Screw Phillips Truss Head Sems Compatible with Honda Acura BMW 90114-SE0-000 Accord ILX RDX TL TSX 90114SE0000
Asin: B07FW3KBSC | Ean: 0712885452521 | UPC: 712885452521
Replaces Honda Acura 90114-Se0-000,90114-Sz3-000 Accord 1986-2012, Civic 1999-2005, 2013-2015, Cr-V 2012-2016, 2000-2006, Element 2003-2007, Fit 2007-2009, Hr-V 2016-2019, Insight 2011-2014, Odyssey 1995-1997, Prelude 1988-2001, S2000 2000-2009.
Meet Or Exceed Oem Specification.
Fits Acura Ilx 2013-2019, Rdx 2007-2018, Tl 1995-2014, Tsx 2013-2014, Rsx 2003-2006, Rl 2006-2012, Nsx 1991-1996, Legend 1986-1995, Cl 1997-2003.
Black E-Coat, #10 X 3/4” M4.8-1.61 X 19Mm Washer O.D.: 16Mm.
Features
- Other Names: Side Cover Screw, Under Cover Screw, Bumper Cover Screw, Fender Liner Bolt, Access Cover Bolt, Splash Shield Screw, License Frame Screw, Rear Cover Screw, Radiator Support Splash Shield Screw, Screw Tap (5X20)
- Black E-Coat, #10 x 3/4 M4.8-1.61 x 19mm Washer O.D.: 16mm
- Replaces Honda Acura 90114-SE0-000,90114-SZ3-000 Accord 1986-2012, Civic 1999-2005, 2013-2015, CR-V 2012-2016, 2000-2006, Element 2003-2007, Fit 2007-2009, HR-V 2016-2019, Insight 2011-2014, Odyssey 1995-1997, Prelude 1988-2001, S2000 2000-2009
- Fits Acura ILX 2013-2019, RDX 2007-2018, TL 1995-2014, TSX 2013-2014, RSX 2003-2006, RL 2006-2012, NSX 1991-1996, Legend 1986-1995, CL 1997-2003
- Meet or Exceed OEM Specification
- See more on Amazon...
Brand: Rexka | Manufacturer: Yongtao
Weight: 1.00 Pounds
See On Amazon #3
Rexka 20pcs Under-Body Shield Screw for Ford
Asin: B0B49P5TNB | Ean: 0643375938105 | UPC: 643375938105
Brand: Rexka | Manufacturer: Yongtao
See On Amazon #4
SONGTIY Lower Engine Cover Pin Screws, Radiator Engine Access Cover Pin Clips, Engine Splash Shield Bolt Screw Fastener Clip, Compatible with Honda Civic Accord CRV Acura (14 Pieces)
Asin: B0B8CKXWCQ | Ean: 0605182658034 | UPC: 605182658034
🔧【Reliable Material】 The Lower Engine Cover Bolt Pin Screws Are Made Of High-Quality Metal Material, Splash Shield Hardware Is Stable In Structure, Exquisite In Workmanship, Strong And Sturdy..
🔧【Wide Compatibility】 The Engine Access Cover Pin And Bolts Are Compatible With Honda Accord 2014 2015 2016 2017 2018-2020, Honda Crv 2017 2018 2019 2020, Honda Civic 2017 2018 2019 2020, Acura Ilx, Rlx And Tlx..
🔧【Easy To Install】 No Modification Required, Only Requires A Couple Of Tools And Several Minutes Of Your Time To Replacement The Worn Part Directly..
🔧【Practical Set】 You Will Receive 6 Pieces Engine Access Cover Pin For Replacement, Compatible With #90674-Ty2-A01, 2 Pieces Lower Cover Bolt For Replacement, Compatible With #90105-Tba-A00, And 6 Pieces Of Radiator Engine Access Cover Pin Clips..
Features
- IDEAL REPLACEMENT PARTS These lower engine radiator cover bolt pin screws and lower cover bolt fits your car perfectly, ideal substitute for original equipment. Reliable to use for a long time.
- Practical Set You will receive 6 pieces engine access cover pin for replacement, compatible with #90674-TY2-A01, 2 pieces lower cover bolt for replacement, compatible with #90105-TBA-A00, and 6 pieces of radiator engine access cover pin clips.
- Reliable Material The lower engine cover bolt pin screws are made of high-quality metal material, splash shield hardware is stable in structure, exquisite in workmanship, strong and sturdy.
- Easy to install No modification required, only requires a couple of tools and several minutes of your time to replacement the worn part directly.
- Wide Compatibility The engine access cover pin and bolts are compatible with Honda Accord 2014 2015 2016 2017 2018-2020, Honda CRV 2017 2018 2019 2020, Honda Civic 2017 2018 2019 2020, Acura ILX, RLX and TLX.
- See more on Amazon...
Brand: SONGTIY | Manufacturer: SONGTIY
Dimensions: 0.40 x 3.80 x 2.36 Inches
See On Amazon #5
Lantee 100 Pcs Car Front Fender Skirt Push-Type Plastic Nylon Retainer Clips Fasteners Rivets 15 x 12 x 6mm
Asin: B01LWRX0O9 | Model: LTC31 | PartNumber: LTC31 | Ean: 0700697250701 | UPC: 700697250701
Fit Hole Size: 6Mm.
Package Include: 100 Pieces Car Clips.
Replaces: Honda 90683-Sa5-003.
Head Diameter: 15Mm, Stem Length:12Mm.
Features
- Black nylon push in type car clips
- Head Diameter: 15mm, Stem Length:12mm
- Fit Hole Size: 6mm
- Replaces: Honda 90683-SA5-003
- Package Include: 100 pieces car clips
- See more on Amazon...
Brand: Lantee | Manufacturer: Lantee
See On Amazon #6
Rexka 10pcs T25 Fender Liner Splash Shield Bumper Cover Self Tapping Torx Screw Compatible with N90974701 Volkswagon Audi Porsche
Asin: B0B17T1N7V | Ean: 0643375933766 | UPC: 643375933766
Black Phosphate ,14.5Mm Head O.D. M5 X 16Mm.
Meet Or Exceed Oem Specification. Direct Fitment..
Replaces N90974701. Compatible With Atlas, Beetle, Cc, E-Golf, Eos, Golf, Golf Alltrack, Golf R, Golf Sportwagen, Gti, Jetta, Passat, Tiguan, Touareg; Cayenne, Macan; A3, A3 Quattro, A3 Sportback E-Tron, A4, A4 Allroad, A4 Quattro, A5, A5 Quattro, A6, A6 Quattro, A7 Quattro, Allroad, Q3, Q3 Quattro, Q5, Q7, R8, Rs5, Rs7, S3, S4, S5, S6, S7, Sq5, Tt, Tt Quattro.
Center Support Screw, Corner Support Screw, Release Handle Bolt, Center Bracket Bolt, Lower Cover Bolt, Rear Bracket Bolt, Sight Shield Bolt, Sight Shield Nut, Skid Plate Bolt, Support Bolt, Center Grille Bolt, Guide Bolt, Handle Bolt, Lower Cross-Member Bolt, Splash Pan Bolt, Side Support Bolt, Splash Guard Screw, Rocker Molding Bolt, Side Support Screw, Intake Duct Bolt, Grille Assembly Bolt, Insert Bolt, Fender Liner Nut, Mount Bracket Nut, Upper Cover Bolt, Inlet Duct Bolt.
Features
- Other Names: Fender Liner Bolt, Fender Liner Screw, Splash Shield Front Bolt, Bumper Cover Screw, Wheel Opening Molding Bolt, Liner Extension Bolt, Mount Bracket Bolt, Wheelhouse Liner Bolt, Splash Shield Screw, Bumper Cover Bolt, End Cover Bolt, Bracket Bolt, Fog Lamp Assembly Screw, Side Trim Bolt, Rocker Molding Screw, End Cap Bolt, Front Extension Screw, Door Trim Panel Bolt, Door Trim Panel Screw, Wheelhouse Liner Screw, Air Inlet Duct Bolt, Fog Lamp Screw, Grille Screw, Guide Bracket Bolt
- Center Support Screw, Corner Support Screw, Release Handle Bolt, Center Bracket Bolt, Lower Cover Bolt, Rear Bracket Bolt, Sight Shield Bolt, Sight Shield Nut, Skid Plate Bolt, Support Bolt, Center Grille Bolt, Guide Bolt, Handle Bolt, Lower Cross-member Bolt, Splash Pan Bolt, Side Support Bolt, Splash Guard Screw, Rocker Molding Bolt, Side Support Screw, Intake Duct Bolt, Grille Assembly Bolt, Insert Bolt, Fender Liner Nut, Mount Bracket Nut, Upper Cover Bolt, Inlet Duct Bolt
- Black Phosphate ,14.5mm Head O.D. M5 x 16mm
- Replaces N90974701. Compatible with Atlas, Beetle, CC, e-Golf, Eos, Golf, Golf Alltrack, Golf R, Golf SportWagen, GTI, Jetta, Passat, Tiguan, Touareg; Cayenne, Macan; A3, A3 Quattro, A3 Sportback e-tron, A4, A4 allroad, A4 Quattro, A5, A5 Quattro, A6, A6 Quattro, A7 Quattro, allroad, Q3, Q3 Quattro, Q5, Q7, R8, RS5, RS7, S3, S4, S5, S6, S7, SQ5, TT, TT Quattro
- Meet or Exceed OEM Specification. Direct Fitment.
- See more on Amazon...
Brand: Rexka | Manufacturer: Yongtao
See On Amazon #7
120pcs Retainer Clips Push Type Retainers 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit, Plastic Bumper Push Rivets Fastener with Remover Fit for GMC Ford Toyota Honda Acura (120)
Asin: B09PTY238Q
[Easy Installation] Only Takes Few Second To Install This Bumper Rivets. Remove Your Old Or Broken Rivets With Screw Remover, Press A New One Into The Mounting Hole, The Rivet Will Be Expanded. Very Easy To Use, All Required Tools Are Included, No Need Any Extra Tools..
[What You Receive] Package Includes 120 Pcs (6 Different Sizes: 6.3(1/4"),8(5/16"),9(23/64") To 10 (25/64") , We Offer One-Year Warranty And Satisfaction Guarantee, Welcome To Let Us Know If You Have Any Questions Or Concerns, Our Team Will Respond Asap..
[Please Note] These Rivets Can Only Push To The Mounting Hole Size Between 8Mm To 8.76Mm, Please Measure The Diameter Before Ordering, In Case It Is Not Suitable..
[Widely Use] Ideal For Door Trim, Radiator Shield Yoke, Fender, Bumper, Side Skirt, Grille, Engine Cover, And Splash Shield Retainers. Suitable For Most Brands Of Cars, Trucks, Vehicles, Suvs, Etc..
Features
- [RELIABLE QUALITY] Our rivet is made of premium quality black nylon material, features wear-resistant, anti-corrosion performance, no irritating smells and no toxic. It can be used for a long time that you don't have to worry it will be damaged or bent, the material it adopted can extend the service life.
- [WIDELY USE] Ideal for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover, and splash shield retainers. Suitable for most brands of cars, trucks, vehicles, SUVs, etc.
- [EASY INSTALLATION] Only takes few second to install this bumper rivets. Remove your old or broken rivets with screw remover, press a new one into the mounting hole, the rivet will be expanded. Very easy to use, all required tools are included, no need any extra tools.
- [PLEASE NOTE] These rivets can only push to the mounting hole size between 8mm to 8.76mm, please measure the diameter before ordering, in case it is not suitable.
- [WHAT YOU RECEIVE] Package includes 120 pcs (6 different sizes: 6.3(1/4),8(5/16),9(23/64) to 10 (25/64) , we offer one-year warranty and satisfaction guarantee, welcome to let us know if you have any questions or concerns, our team will respond asap.
- See more on Amazon...
Brand: BLAU GRUN | Manufacturer: BLAU GRUN
See On Amazon #8
Rexka 15 Sets Fender Liner Splash Shield Screw U Nut Kit for Honda Acura 90308-SB2-013 90114-SE0-000 Accord Civic CR-V Crosstour Element Odyssey Passport Pilot Ridgeline S2000 & More Radiator Support
Asin: B0CGPGMRLW
15Pcs Multipurpose Screw. Black E-Coat, #10 X 3/4” M4.8-1.61 X 19Mm Washer O.D.: 16Mm. Replaces Honda Acura 90114-Se0-000,90114-Sz3-000. Other Names: Side Cover Screw, Under Cover Screw, Bumper Cover Screw, Fender Liner Bolt, Access Cover Bolt, Splash Shield Screw, License Frame Screw, Rear Cover Screw, Radiator Support Splash Shield Screw, Screw Tap (5X20).
Fits Acura Cl 1997-1999; Ilx 2013-2021; Ilx Hybrid 2013-2014; Integra 1994-2001; Legend 1988-1995; Mdx 2001, 2003-2006, 2014-2020; Rdx 2007-2012, 2019-2021; Rlx 2014-2020; Rsx 2002-2006; Tl 2002-2008; Tlx 2015-2020; Tsx 2004-2008, 2011-2014..
Fits Honda Accord 1986-1994, 1996-1997, 2003-2017; Accord Coupe 1989-1993, 1996-1997, 2003-2005, 2008-2017; Accord Liftback 1986-1989; Accord Wagon 1991-1997; Civic 1986-1990, 1999-2011, 2014-2023; Civic Coupe 1999-2020; Civic Hatchback 1989-1995, 1997-2000, 2002-2004; Civic Liftback 2022-2023; Civic Wagon 1987-1991; Cr-V 2002-2009, 2017-2023; Cr-Z 2011-2016; Crosstour 2010-2012; Element 2003-2006; Fit 2007-2020; Hr-V 2016-2022; Insight 2010-2014, 2019-2022; Odyssey 2005-2010, 2018-2023; Passport 2019-2023; Pilot 2003-2008, 2016-2022; Prelude 1988-1989, 1991; Ridgeline 2017-2023; S2000 2000-2005, 2008-2009.
15Pcs Multipurpose U Nut (5Mm), Replaces Honda Acura 90308-Sb2-000, 90308-Sb2-003.Other Names:Fog Light Nut,Valance Panel Nut,Bumper Cover Nut,Radiator Support Splash Shield Nut,Spoiler Nut,Side Body Trim Protector Nut,Fender Liner Nut,Engine Oil Drain Plug Access Cover Nut.
Features
- Honda Acura Fender Liner Radiator Support Splash Shield Screw U Nut Kit
- 15pcs Multipurpose U Nut (5mm), Replaces Honda Acura 90308-SB2-000, 90308-SB2-003.Other Names:Fog Light Nut,Valance Panel Nut,Bumper Cover Nut,Radiator Support Splash Shield Nut,Spoiler Nut,Side Body Trim Protector Nut,Fender Liner Nut,Engine Oil Drain Plug Access Cover Nut
- 15pcs Multipurpose Screw. Black E-Coat, #10 x 3/4 M4.8-1.61 x 19mm Washer O.D.: 16mm. Replaces Honda Acura 90114-SE0-000,90114-SZ3-000. Other Names: Side Cover Screw, Under Cover Screw, Bumper Cover Screw, Fender Liner Bolt, Access Cover Bolt, Splash Shield Screw, License Frame Screw, Rear Cover Screw, Radiator Support Splash Shield Screw, Screw Tap (5X20)
- Fits Honda Accord 1986-1994, 1996-1997, 2003-2017; Accord Coupe 1989-1993, 1996-1997, 2003-2005, 2008-2017; Accord Liftback 1986-1989; Accord Wagon 1991-1997; Civic 1986-1990, 1999-2011, 2014-2023; Civic Coupe 1999-2020; Civic Hatchback 1989-1995, 1997-2000, 2002-2004; Civic Liftback 2022-2023; Civic Wagon 1987-1991; CR-V 2002-2009, 2017-2023; CR-Z 2011-2016; Crosstour 2010-2012; Element 2003-2006; Fit 2007-2020; HR-V 2016-2022; Insight 2010-2014, 2019-2022; Odyssey 2005-2010, 2018-2023; Passport 2019-2023; Pilot 2003-2008, 2016-2022; Prelude 1988-1989, 1991; Ridgeline 2017-2023; S2000 2000-2005, 2008-2009
- Fits Acura CL 1997-1999; ILX 2013-2021; ILX Hybrid 2013-2014; Integra 1994-2001; Legend 1988-1995; MDX 2001, 2003-2006, 2014-2020; RDX 2007-2012, 2019-2021; RLX 2014-2020; RSX 2002-2006; TL 2002-2008; TLX 2015-2020; TSX 2004-2008, 2011-2014.
- See more on Amazon...
Brand: Rexka | Manufacturer: Yongtao
See On Amazon #9
Rexka 50pcs Fender Liner Bumper Cover Tapping Screw Bolt W710763-S901 Compatible with Ford Lincoln Edge Expedition Explorer F-150 Fiesta Flex Taurus Mark LT MKT MKX Navigator N801169-S900
Asin: B07YJ892RX | Ean: 0742377995663 | UPC: 742377995663
Replaces Ford N801169-S900; W710763-S901. Fits Ford : Edge, Expedition, Explorer, F-150, Fiesta, Flex, Taurus; Lincoln: Mark Lt, Mkt, Mkx, Navigator.
Widely Used In Front Bumper, Exterior Trim, And Front Fender.
M4.2 - 1.41 X 22Mm, Hex Size: 5.5Mm, Washer Diameter: 16Mm.
End Cover Screw, Handle, Inside Screw, Lower Molding Screw, Rear Trim Screw, Side Support Screw, Air Deflector Retainer Screw, Lower Deflector Screw, Lower Shield Screw, Side Extension Screw, Lower Grille Screw, Valance Screw, Wheelhouse Liner Screw, Screw.
Features
- Other Names: Splash Shield Screw, Wheel Opening Molding Screw, Fender Liner Screw, Side Molding Screw, Side Reinforced Screw, Bumper Cover Screw, Extension Screw, Valance Panel Screw, Deflector Screw, Wheel Flare Screw, Bumper Cover Bolt, Side Bracket Screw, Upper Shield Screw, Air Deflector Screw
- End Cover Screw, Handle, Inside Screw, Lower Molding Screw, Rear Trim Screw, Side Support Screw, Air Deflector Retainer Screw, Lower Deflector Screw, Lower Shield Screw, Side Extension Screw, Lower Grille Screw, Valance Screw, Wheelhouse Liner Screw, Screw
- Replaces Ford N801169-S900; W710763-S901. Fits Ford : Edge, Expedition, Explorer, F-150, Fiesta, Flex, Taurus; Lincoln: Mark LT, MKT, MKX, Navigator
- M4.2 - 1.41 x 22mm, Hex Size: 5.5mm, Washer Diameter: 16mm
- Widely Used in Front Bumper, Exterior Trim, and Front Fender
- See more on Amazon...
Brand: Rexka | Manufacturer: Yongtao
See On Amazon #10
Rexka 10 Sets Bumper Cover Splash Shield Mud Guard Screw Bolt & Nylon Screw Grommet Nuts for Toyota Lexus 90159-60498 RAV4 Avalon Camry Highlander Prius ES300h GS350
Asin: B0BJV17WZL | Ean: 0658738909722 | UPC: 658738909722
10Pcs Screw Size: M5.5 (#12); Head Size: 14Mm X 16Mm; Stem Length: 10Mm. Replaces Toyota Lexus 90189-06193.
Fits Lexus: Es300h, Es350, Gs F, Gs Turbo, Gs200t, Gs300, Gs350, Gs430, Gs450h, Gs460, Is F, Is Turbo, Is200t, Is250, Is300, Is350, Lfa, Ls430, Ls460, Ls500, Ls500h, Ls600hl, Rc F, Rc Turbo, Rc200t, Rc300, Rc350, Rx330, Rx350, Rx350l, Rx400h, Rx450h, Rx450hl.
Meet Or Exceed Oem Specification.
Fits Scion: Im,Tc,Xa,Xd; Toyota: Avalon,Camry,Celica, Corolla, Corolla Im, Echo, Highlander, Mr2 Spyder, Paseo, Prius, Prius C, Rav4, Tacoma, Tercel, Tundra, Yaris.
10Pcs Black E-Coat Phillips Hex Head Screw, M6.1 X 19Mm 16Mm Washer O.D. 10Mm Hex. Replaces Toyota Lexus: 90159-60498,90159-T0034.
Features
- Toyota Lexus Bumper Cover Splash Shield Mud Guard Screws & Nylon Screw Grommets Kit
- 10pcs Black E-Coat Phillips Hex Head Screw, M6.1 x 19mm 16mm Washer O.D. 10mm Hex. Replaces Toyota Lexus: 90159-60498,90159-T0034
- 10pcs Screw Size: M5.5 (#12); Head Size: 14mm x 16mm; Stem Length: 10mm. Replaces Toyota Lexus 90189-06193
- Fits Scion: iM,Tc,xA,xD; Toyota: Avalon,Camry,Celica, Corolla, Corolla iM, Echo, Highlander, MR2 Spyder, Paseo, Prius, Prius C, RAV4, Tacoma, Tercel, Tundra, Yaris
- Fits Lexus: ES300h, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GS430, GS450h, GS460, IS F, IS Turbo, IS200t, IS250, IS300, IS350, LFA, LS430, LS460, LS500, LS500h, LS600hL, RC F, RC Turbo, RC200t, RC300, RC350, RX330, RX350, RX350L, RX400h, RX450h, RX450hL
- Meet or Exceed OEM Specification
- See more on Amazon...
Brand: Rexka | Manufacturer: Yontao
Dimensions: 0.39 x 0.39 x 0.59 inches
See On Amazon #11
100PCS Car Bumper Retainer Clips, Car Plastic Rivets Fasteners Push Retainer Kit, Most Popular Size Car Push Rivet Kit - Bumper Car Clips Expansion Screws Replacement Kit
Asin: B09XHR9J83
[Perfect For What You Need]:Up To 100 Pieces Of Retainer Clips In A Plastic Box, Allows To Freely Diy Your Vehicle Accessories At Anytime You Wanted. It Is Definitely Cheaper Than Going To The Auto Parts Store..
[Convenient To Carry]: Automotive Body Parts Trim There Is A Plastic Box, 6 Compartments Are Convenient, Easy To Carry..
[Package Included]: 20Pcs 6Mm,20Pcs 8Mm,10Pcs 8.1Mm,10Pcs 9.8Mm,20Pcs 6.6*8.8Mm,20Pcs 7.6Mm..
[Feautures]:6 Different Push Pin Rivet For Many Brand Vehicles,Gm Ford Toyota Honda Chrysler..
Features
- [High quality material]:Bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
- [Feautures]:6 different Push pin rivet for many brand vehicles,GM Ford Toyota Honda Chrysler.
- [Perfect for what you need]:Up to 100 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
- [Package included]: 20pcs 6mm,20pcs 8mm,10pcs 8.1mm,10pcs 9.8mm,20pcs 6.6*8.8mm,20pcs 7.6mm.
- [Convenient to carry]: Automotive body parts trim there is a plastic box, 6 compartments are convenient, easy to carry.
- See more on Amazon...
Brand: deemars | Manufacturer: deemars
Dimensions: 1.18 x 8.66 x 3.94 inches | Weight: 0.16 Kilograms
See On Amazon #12
Rexka 20 Sets Bumper Cover Splash Shield Mud Guard Screw Bolt & Nylon Screw Grommet Nuts for Toyota Lexus 90159-60498 RAV4 Avalon Camry Highlander Prius ES300h GS350
Asin: B0BJSYMDLJ | Ean: 0658738909715 | UPC: 658738909715
20Pcs Screw Size: M5.5 (#12); Head Size: 14Mm X 16Mm; Stem Length: 10Mm. Replaces Toyota Lexus 90189-06193.
Fits Lexus: Es300h, Es350, Gs F, Gs Turbo, Gs200t, Gs300, Gs350, Gs430, Gs450h, Gs460, Is F, Is Turbo, Is200t, Is250, Is300, Is350, Lfa, Ls430, Ls460, Ls500, Ls500h, Ls600hl, Rc F, Rc Turbo, Rc200t, Rc300, Rc350, Rx330, Rx350, Rx350l, Rx400h, Rx450h, Rx450hl.
Meet Or Exceed Oem Specification.
Fits Scion: Im,Tc,Xa,Xd; Toyota: Avalon,Camry,Celica, Corolla, Corolla Im, Echo, Highlander, Mr2 Spyder, Paseo, Prius, Prius C, Rav4, Tacoma, Tercel, Tundra, Yaris.
20Pcs Black E-Coat Phillips Hex Head Screw, M6.1 X 19Mm 16Mm Washer O.D. 10Mm Hex. Replaces Toyota Lexus: 90159-60498,90159-T0034.
Features
- Toyota Lexus Bumper Cover Splash Shield Mud Guard Screws & Nylon Screw Grommets Kit
- 20pcs Black E-Coat Phillips Hex Head Screw, M6.1 x 19mm 16mm Washer O.D. 10mm Hex. Replaces Toyota Lexus: 90159-60498,90159-T0034
- 20pcs Screw Size: M5.5 (#12); Head Size: 14mm x 16mm; Stem Length: 10mm. Replaces Toyota Lexus 90189-06193
- Fits Scion: iM,Tc,xA,xD; Toyota: Avalon,Camry,Celica, Corolla, Corolla iM, Echo, Highlander, MR2 Spyder, Paseo, Prius, Prius C, RAV4, Tacoma, Tercel, Tundra, Yaris
- Fits Lexus: ES300h, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GS430, GS450h, GS460, IS F, IS Turbo, IS200t, IS250, IS300, IS350, LFA, LS430, LS460, LS500, LS500h, LS600hL, RC F, RC Turbo, RC200t, RC300, RC350, RX330, RX350, RX350L, RX400h, RX450h, RX450hL
- Meet or Exceed OEM Specification
- See more on Amazon...
Brand: Rexka | Manufacturer: Yontao
Dimensions: 0.39 x 0.39 x 0.59 inches
See On Amazon #13
Rexka 10pcs Under-Body Shield Screw for Ford
Asin: B0B49P4M15 | Ean: 0643375938112 | UPC: 643375938112
Brand: Rexka | Manufacturer: Yongtao
See On Amazon #14
Rexka 15 Sets M4.2 Universal Fender Liner Engine Splash Shield Hex Head Screw & U Nut Kit for GM Chevy Ford Buick Jeep Chrysler - Multipurpose - Type A
Asin: B0BJT8KY2W | Ean: 0658738909609 | UPC: 658738909609
✔ 10Pcs Multipurpose Spring Type U Nuts Phosphate, #8 Screw Size, Panel Range: .025"-.150", Center Of Hole To Edge: 3/8".
💯 Meet Or Exceed Oem Specification. Direct Fitments.
🚗 This Kit Is Used Universally Across Models Of Gm Ford Chrysler Such As For The Engine Undertray Cover, Wheel Arch Splash Guards, Fender Liner..Etc. Be Sure To Check If This Part Is Correct For You By Using The Provided Image, Part Numbers, Sizes ,And Compatibility Chart Before Purchase..
✔ 10Pcs Multipurpose Phosphate Hex Head Sems Tapping Screws, M4.2-1.41 X 20Mm (#8 X 25/32"), Washer O.D.: 16Mm (5/8"), 7Mm Hex.
Features
- M4.2 Universal Fender Liner Engine Splash Shield Screw & U Nut Kit
- 10pcs Multipurpose Phosphate Hex Head Sems Tapping Screws, M4.2-1.41 x 20mm (#8 x 25/32), Washer O.D.: 16mm (5/8), 7mm Hex
- 10pcs Multipurpose Spring Type U Nuts Phosphate, #8 Screw Size, Panel Range: .025-.150, Center Of Hole To Edge: 3/8
- This Kit is Used Universally Across Models of GM Ford Chrysler Such as for the Engine Undertray Cover, Wheel Arch Splash Guards, Fender Liner..Etc. Be Sure to Check if This Part is Correct for You by Using the Provided Image, Part Numbers, Sizes ,and Compatibility Chart Before Purchase.
- Meet or Exceed OEM Specification. Direct Fitments
- See more on Amazon...
Brand: Rexka | Manufacturer: Yontao
Dimensions: 0.39 x 0.39 x 0.59 Inches
See On Amazon #15
Rexka 15 Sets T30 Engine Splash Shield Guard Undertray Cover Screws Bolt Nut Clip Kit Compatible with Ford Focus Fusion Escape Explorer C-Max Transit Connect Lincoln MKC
Asin: B0BFG9Q7VM | Ean: 0658738905397 | UPC: 658738905397
Other Names(Spring Nut):Reservoir Nut, Side Reinforced Nut, Under Cover Nut, Master Cylinder Nut, Side Support Nut, Cowl Grille Nut, Lower Shield Nut, Reinforced Panel Nut, Reservoir Tank Nut, Side Bracket Nut, Fender Liner Retainer, Ft Fender Liner Nut, Nut - Spring.
15 Pcs Of T30 Torx Drive Head Self-Tapping Screw, Black Phosphate, M5 X 20Mm; 15 Pcs Of Screw Grommet,Light Green Nylon; 15Pcs M5 U Nut.
Fits The Following Cars: C-Max 2013-2018,Fusion 2013-2018, Escape 2013-2018, F-150 2015-2018, Edge 2015-2018, Escort 1985-1990 1995-2001, Focus 2004-2018, Galaxie 1979-1983, Galaxy 2006-2015, Ka 1996-2009, Mondeo 1993-2007, Orion 1985-1993, Scorpio I 1989-1994, Sierra 1982-1993, Fiesta 1989-1996.
Other Names(Nut) :Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut, Under-Body Shield Nut, Lower Shield Nut, Shield Nut, Air Deflector Nut, Front Shield Nut, Lower Deflector Nut, Front Deflector Nut, Reservoir Assembly Nut, Front Deflector U-Nut, Rear Deflector U-Nut, Side Cover Nut, Air Shield Nut, Lower Deflector Retainer Nut, Bumper Cover Retainer, Rear Deflector Retainer, Under Cover Retainer, Exhaust Heat Shield Nut.
Features
- Other Names (Screw) :Emblem Screw, Deflector Screw, Fender Liner Screw, Lower Deflector Screw, Lower Shield Screw, Under Cover Screw, Front Shield Screw, Air Deflector Screw, Exhaust Heat Shield Screw, Air Guide Screw, Grille Screw, Screw And Washer Assembly
- Other Names(Nut) :Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut, Under-Body Shield Nut, Lower Shield Nut, Shield Nut, Air Deflector Nut, Front Shield Nut, Lower Deflector Nut, Front Deflector Nut, Reservoir Assembly Nut, Front Deflector U-Nut, Rear Deflector U-Nut, Side Cover Nut, Air Shield Nut, Lower Deflector Retainer Nut, Bumper Cover Retainer, Rear Deflector Retainer, Under Cover Retainer, Exhaust Heat Shield Nut
- Other Names(Spring Nut):Reservoir Nut, Side Reinforced Nut, Under Cover Nut, Master Cylinder Nut, Side Support Nut, Cowl Grille Nut, Lower Shield Nut, Reinforced Panel Nut, Reservoir Tank Nut, Side Bracket Nut, Fender Liner Retainer, Ft Fender Liner Nut, Nut - Spring
- Fits the Following Cars: C-Max 2013-2018,Fusion 2013-2018, Escape 2013-2018, F-150 2015-2018, Edge 2015-2018, Escort 1985-1990 1995-2001, Focus 2004-2018, Galaxie 1979-1983, Galaxy 2006-2015, KA 1996-2009, Mondeo 1993-2007, Orion 1985-1993, Scorpio I 1989-1994, Sierra 1982-1993, Fiesta 1989-1996
- 15 pcs of T30 Torx Drive Head Self-Tapping Screw, Black Phosphate, M5 x 20mm; 15 pcs of Screw Grommet,Light Green Nylon; 15pcs M5 U Nut
- See more on Amazon...
Brand: Rexka | Manufacturer: Yongtao
Dimensions: 0.39 x 1.97 x 1.97 inches
See On Amazon #16
Osilly 100PCS Car Fender Liner Retainer Clips, Nylon Vehicle Screw Grommet, Auto Body Bumper Screw Bolt, OEM#90189-06065, 96706W100, 90189A0002, Compatible with ES300 ES350 RAV4 and More
Asin: B0CX1LM9RZ | Model: Retainer Clips | PartNumber: Retainer Clips
【Easy Installation】: Push Design Allows You To Install It Easily, Just Simply Push It And It Will Be Tight. Great Replacement For Worn Or Damaged Ones, Perfect For Your Car, Won't Come Loose Over Time. Easy To Remove, Not Easy To Scratch Your Car, Using Fastener Remover Can Help You Quickly Remove It..
【Compatibility】: Oem Replacement Part Number Is 90189-06065, 96706W100, 90189A0002. Compatible With 1990-1991 Es250, 1993-2006 Gs300, 2010-On Gx460, 2005-2009 Gx470, 2001-2005 S300, 2008-2011 Lx570, 1999-2003 Rx300, 2004-2006 Rx330, 2007-2011 Rx350, 2006-2011 Rx400h, Sc430, Es300, Es350; Rav4; Tc, Xa, Xb, Xd, Etc..
【Wide Application】: Head Diameter: 20Mm, Stem Length: 18Mm, Hole Size: 8Mm Square. Can Be Used For Bumper, Grill And Radiator Area, Wing Liner Retainer, Reinforcement Plate Retainer, Retainer, Bumper Cover Retainer, Side Shroud Retainer, Package Tray Decorative Pins, Decorative Panel Clips, Etc..
【Practical Function】: You Are Able To Remove The Clip Quickly And Easily Without Damaging It. This Product Brings More Peace Of Mind And Comfort To Your Driving With Its Excellent Performance And Practicality. This Product Has A Beautifully Simple And Comfortable Appearance, And Blends Perfectly With The Vehicle Liner, Which Not Only Enhances The Appearance Of The Vehicle, But Also Helps You To Fix It..
Features
- High Quality Material : This product is made of high quality nylon material, reusable, sturdy and durable, not easy to crack or break during use. With wear-resistant and corrosion-resistant effect, strong and durable, not easy to break or crack, long service life. Strong durability and stability, ensure the stability and safety of your vehicle in various road conditions.
- Practical Function : You are able to remove the clip quickly and easily without damaging it. This product brings more peace of mind and comfort to your driving with its excellent performance and practicality. This product has a beautifully simple and comfortable appearance, and blends perfectly with the vehicle liner, which not only enhances the appearance of the vehicle, but also helps you to fix it.
- Easy Installation : Push design allows you to install it easily, just simply push it and it will be tight. Great replacement for worn or damaged ones, perfect for your car, won't come loose over time. Easy to remove, not easy to scratch your car, using fastener remover can help you quickly remove it.
- Wide Application : Head Diameter: 20mm, Stem Length: 18mm, Hole Size: 8mm Square. Can be used for bumper, grill and radiator area, wing liner retainer, reinforcement plate retainer, retainer, bumper cover retainer, side shroud retainer, package tray decorative pins, decorative panel clips, etc.
- Compatibility : OEM Replacement Part Number is 90189-06065, 96706W100, 90189A0002. Compatible with 1990-1991 ES250, 1993-2006 GS300, 2010-On GX460, 2005-2009 GX470, 2001-2005 S300, 2008-2011 LX570, 1999-2003 RX300, 2004-2006 RX330, 2007-2011 RX350, 2006-2011 RX400H, SC430, ES300, ES350; RAV4; tC, xA, xB, xD, etc.
- See more on Amazon...
Brand: Osilly | Manufacturer: Osilly
Dimensions: 0.30 x 0.20 x 0.20 inches | Weight: 0.01 pounds
See On Amazon #17
Rexka 50pcs T25 Fender Liner Splash Shield Bumper Cover Self Tapping Torx Screw Compatible with N90974701 Volkswagon Audi Porsche
Asin: B0B4B7G6FC | Ean: 0658738903874 | UPC: 658738903874
Black Phosphate ,14.5Mm Head O.D. M5 X 16Mm.
Meet Or Exceed Oem Specification. Direct Fitment..
Replaces N90974701. Compatible With Atlas, Beetle, Cc, E-Golf, Eos, Golf, Golf Alltrack, Golf R, Golf Sportwagen, Gti, Jetta, Passat, Tiguan, Touareg; Cayenne, Macan; A3, A3 Quattro, A3 Sportback E-Tron, A4, A4 Allroad, A4 Quattro, A5, A5 Quattro, A6, A6 Quattro, A7 Quattro, Allroad, Q3, Q3 Quattro, Q5, Q7, R8, Rs5, Rs7, S3, S4, S5, S6, S7, Sq5, Tt, Tt Quattro.
Center Support Screw, Corner Support Screw, Release Handle Bolt, Center Bracket Bolt, Lower Cover Bolt, Rear Bracket Bolt, Sight Shield Bolt, Sight Shield Nut, Skid Plate Bolt, Support Bolt, Center Grille Bolt, Guide Bolt, Handle Bolt, Lower Cross-Member Bolt, Splash Pan Bolt, Side Support Bolt, Splash Guard Screw, Rocker Molding Bolt, Side Support Screw, Intake Duct Bolt, Grille Assembly Bolt, Insert Bolt, Fender Liner Nut, Mount Bracket Nut, Upper Cover Bolt, Inlet Duct Bolt.
Features
- Other Names: Fender Liner Bolt, Fender Liner Screw, Splash Shield Front Bolt, Bumper Cover Screw, Wheel Opening Molding Bolt, Liner Extension Bolt, Mount Bracket Bolt, Wheelhouse Liner Bolt, Splash Shield Screw, Bumper Cover Bolt, End Cover Bolt, Bracket Bolt, Fog Lamp Assembly Screw, Side Trim Bolt, Rocker Molding Screw, End Cap Bolt, Front Extension Screw, Door Trim Panel Bolt, Door Trim Panel Screw, Wheelhouse Liner Screw, Air Inlet Duct Bolt, Fog Lamp Screw, Grille Screw, Guide Bracket Bolt
- Center Support Screw, Corner Support Screw, Release Handle Bolt, Center Bracket Bolt, Lower Cover Bolt, Rear Bracket Bolt, Sight Shield Bolt, Sight Shield Nut, Skid Plate Bolt, Support Bolt, Center Grille Bolt, Guide Bolt, Handle Bolt, Lower Cross-member Bolt, Splash Pan Bolt, Side Support Bolt, Splash Guard Screw, Rocker Molding Bolt, Side Support Screw, Intake Duct Bolt, Grille Assembly Bolt, Insert Bolt, Fender Liner Nut, Mount Bracket Nut, Upper Cover Bolt, Inlet Duct Bolt
- Black Phosphate ,14.5mm Head O.D. M5 x 16mm
- Replaces N90974701. Compatible with Atlas, Beetle, CC, e-Golf, Eos, Golf, Golf Alltrack, Golf R, Golf SportWagen, GTI, Jetta, Passat, Tiguan, Touareg; Cayenne, Macan; A3, A3 Quattro, A3 Sportback e-tron, A4, A4 allroad, A4 Quattro, A5, A5 Quattro, A6, A6 Quattro, A7 Quattro, allroad, Q3, Q3 Quattro, Q5, Q7, R8, RS5, RS7, S3, S4, S5, S6, S7, SQ5, TT, TT Quattro
- Meet or Exceed OEM Specification. Direct Fitment.
- See more on Amazon...
Brand: Rexka | Manufacturer: Yongtao
See On Amazon #18
Rexka 50pcs Bumper Cover Fender Liner Splash Shield Screw Retainer 90103-TA0-000 Compatible with Honda Acura Accord Civic CR-V CR-Z Crosstour Fit HR-V Insight Odyssey Passport Pilot Ridgeline
Asin: B0B49VPPSW | Ean: 0658738902884 | UPC: 658738902884
Other Names/Acura: Wheelhouse Liner Screw, Fender Liner Screw, Rocker Molding Screw, Inner Liner Screw, Lower Cover Screw, Flange Screw, Lower Bracket Screw, Bumper Cover Bolt, Fog Lamp Assembly Screw, Grille Screw, Headlamp Bezel Screw, Lower Trim Screw, Side Cover Screw, Mud Guard Screw, Screw Tap (5X20).
Fits: Acura: Ilx, Mdx, Rdx, Rlx, Tl, Tlx, Tsx, Zdx.
Fits: Honda: Accord, Accord Crosstour, Civic, Clarity, Cr-V, Cr-Z, Crosstour, Fit, Hr-V, Insight, Odyssey, Passport, Pilot, Ridgeline, S2000.
Other Names/Honda: Wheelhouse Liner Screw, Wheel Opening Molding Screw, Wheel Flare Screw, Fog Lamp Assembly Screw, Signal Lamp Assembly Screw, Trim Cover Screw, Hole Cover Screw, Lower Grille Screw, Lower Molding Screw,Backup Lamp Assembly Screw, Blank Cover Screw, Fog Lamp Screw, Outer Grille Screw, Signal Lamp Screw, Spacer Screw, Radiator Support Air Duct Screw, Spoiler Screw, Bumper Cover Support Rail Screw, Quarter Panel Splash Shield Screw, Fog Light Screw, Screw Tap (5X20).
Features
- Meet or Exceed OEM Specifciation.M5-1.81 x 20mm
- Other Names/HONDA: Wheelhouse Liner Screw, Wheel Opening Molding Screw, Wheel Flare Screw, Fog Lamp Assembly Screw, Signal Lamp Assembly Screw, Trim Cover Screw, Hole Cover Screw, Lower Grille Screw, Lower Molding Screw,Backup Lamp Assembly Screw, Blank Cover Screw, Fog Lamp Screw, Outer Grille Screw, Signal Lamp Screw, Spacer Screw, Radiator Support Air Duct Screw, Spoiler Screw, Bumper Cover Support Rail Screw, Quarter Panel Splash Shield Screw, Fog Light Screw, Screw Tap (5X20)
- Other Names/ACURA: Wheelhouse Liner Screw, Fender Liner Screw, Rocker Molding Screw, Inner Liner Screw, Lower Cover Screw, Flange Screw, Lower Bracket Screw, Bumper Cover Bolt, Fog Lamp Assembly Screw, Grille Screw, Headlamp Bezel Screw, Lower Trim Screw, Side Cover Screw, Mud Guard Screw, Screw Tap (5X20)
- Fits: Honda: Accord, Accord Crosstour, Civic, Clarity, CR-V, CR-Z, Crosstour, Fit, HR-V, Insight, Odyssey, Passport, Pilot, Ridgeline, S2000
- Fits: Acura: ILX, MDX, RDX, RLX, TL, TLX, TSX, ZDX
- See more on Amazon...
Brand: Rexka | Manufacturer: YongTao
See On Amazon #19
Glarks 160Pcs 12 Sizes Screw Bolt Retainer Car Engine Under Cover Splash Shield Guard Body Bolts Bumper Fender Liner Push Retainer Fastener Rivet Clips with Round Head Self Tapping Screws Assortment
Asin: B0B8MMPPWX
♛【Solid Material】: All The Screws And Bolts Are Made Of High Quality 304 Stainless Steel, Carbon Steel, Steel With Black Zinc Plated And Yellow Zinc Plated. These Materials Ensure High Strength And High Hardness, Strong And Durable, Not Easy To Deform Or Break, Long Service Life..
♛【Wide Application】: These Screws Are Widely Used For Splash Shield, Fender Liner, Bumper Cover, Air Duct, Plastic Trim. Compatible With Audi A3 2006- 2013/ A4 1996- 2016, Volkswagen Cc 09-13, Clarity Electric, Clarity Fuel Cell, Clarity Plug-In Hybrid, Etc..
♛【Chemical Resistance】: Our Screws With Excellent Rust Resistance And Corrosion Resistance Are Chemically Resistant To Gasoline, Engine Oil, Freeze Fluid, Windshield Washer Fluid, Lubrication Oil, Etc. Suitable For Outdoor Use In Harsh Outdoor Environments Like High-Temperature, Cold Weather And High Humidity Areas..
♛【Head Style & Screw Size】: These Bumper Cover Screws Are Most Used Type And Size, Which Head Type Are Flat Head, Round Pan Head, Phillips Head, Hex Washer Head. Screw Length From 16Mm To 40Mm. You Can Choose Them According To You Needs. They Are Suitable For Most Cars..
Features
- Package Included : You will get 12 different type and size fender liner screws, each for 10pcs, 120pcs in total; along with 20pcs m4x20 and 20pcs m4x25 philips round head self tapping screws for your installation. Which are sorted packed in a plastic box can avoid mess and loss.
- Head Style & Screw Size : These bumper cover screws are most used type and size, which head type are flat head, round pan head, phillips head, hex washer head. Screw length from 16mm to 40mm. You can choose them according to you needs. They are suitable for most cars.
- Solid Material : All the screws and bolts are made of high quality 304 stainless steel, carbon steel, steel with black zinc plated and yellow zinc plated. These materials ensure high strength and high hardness, strong and durable, not easy to deform or break, long service life.
- Chemical Resistance : Our screws with excellent rust resistance and corrosion resistance are chemically resistant to gasoline, engine oil, freeze fluid, windshield washer fluid, lubrication oil, etc. Suitable for outdoor use in harsh outdoor environments like high-temperature, cold weather and high humidity areas.
- Wide Application : These screws are widely used for splash shield, fender liner, bumper cover, air duct, plastic trim. Compatible with Audi A3 2006- 2013/ A4 1996- 2016, Volkswagen CC 09-13, Clarity Electric, Clarity Fuel Cell, Clarity Plug-In Hybrid, etc.
- See more on Amazon...
Brand: Glarks | Manufacturer: Glarks
Dimensions: 0.87 x 6.69 x 3.94 inches
See On Amazon #20
GOOACC 50pcs Splash Shield General Purpose Phillips Truss Head Sems Screw for Honda Acura BMW Fender Liner Bumper Cover Screws 90114-SE0-000 90114-SZ3-000 M4.8-1.61x19mm
Asin: B0BZCRYW9K | Model: GRC-311 | PartNumber: GRC-311 | Ean: 0840323904162 | UPC: 840323904162
Material: Black E-Coat.
Package: 50Pcs Splash Shield General Purpose Phillips Truss Head Sems Screw.
Other Names: Side Cover Screw, Under Cover Screw, Bumper Cover Screw, Fender Liner Bolt, Access Cover Bolt, Splash Shield Screw, License Frame Screw, Rear Cover Screw, Radiator Support Splash Shield Screw, Screw Tap (5X20).
Dimension: #10 X 3/4” M4.8-1.61 X 19Mm Washer O.D.: 16Mm.
Features
- Fitment: For Honda 90114-SE0-000 90114-SZ3-000, compatible with Honda Accord, CR-V, CR-Z, Civic, Clarity Electric, Clarity Fuel Cell, Clarity Plug-In Hybrid, Honda Element, Fit, Fit EV, HR-V, Insight, Odyssey, Prelude, S2000
- Dimension: #10 x 3/4 M4.8-1.61 x 19mm Washer O.D.: 16mm
- Material: Black E-Coat
- Other Names: Side Cover Screw, Under Cover Screw, Bumper Cover Screw, Fender Liner Bolt, Access Cover Bolt, Splash Shield Screw, License Frame Screw, Rear Cover Screw, Radiator Support Splash Shield Screw, Screw Tap (5X20)
- Package: 50pcs Splash Shield General Purpose Phillips Truss Head Sems Screw
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 10.00 x 15.00 x 10.00 inches
Warranty: 2 Years Warranty
See On Amazon
Looking For Something Else?
Search