JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 21-26mm, 13/16 -1 Aprox. I.D, 10 Foot)
Asin: B07J1H77SX | Model: AV | PartNumber: AV | Ean: 0788536620465, 0742025421919 | UPC: 742025421919, 788536620465
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Under Hood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other under hood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 inches
See On Amazon Similar To JCP USA SlipOver Cool Sleeves
#1
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 28mm, 1-1/8 Aprox. I.D, 10 Foot)
Asin: B01EGVA7RE | Model: B | PartNumber: B | Ean: 0788536625866 | UPC: 788536625866
Better Than Heavy Silicone Tape, Sleeves Are Lightweight & Slide Over Disconnected Wires, Lines Hoses Or Pipe..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Extreme Heat: Able To Withstand Continuous Exposure Of Up To 2000° F & Direct Contact Up To 500° Degrees.
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Outer Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are lightweight & slide over disconnected wires, lines hoses or pipe.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit. Rated for Extreme Heat: Able to withstand continuous exposure of up to 2000 F & Direct contact up to 500 degrees
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 inches
See On Amazon #2
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 11-18mm, 7/16 -3/4 Aprox. I.D, 6 Foot)
Asin: B07J1HV4XN | Model: AV | PartNumber: AV | Ean: 0728584188623, 0742025421971 | UPC: 742025421971, 728584188623
Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Under Hood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other under hood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 13.00 x 2.00 inches | Weight: 0.24 pounds
See On Amazon #3
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 21-26mm, 13/16 -1 Aprox. I.D, 3 Foot)
Asin: B07HZQGPCP | Model: A | PartNumber: A | Ean: 0742025422015, 0788536620489 | UPC: 788536620489, 742025422015
Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 inches
See On Amazon #4
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 14mm, 9/16 Aprox. I.D, 6 Foot)
Asin: B01LZ81Z89 | Model: E | PartNumber: E | Ean: 0728584192262 | UPC: 728584192262
Better Than Heavy Silicone Tape, Sleeves Are Lightweight & Slide Over Disconnected Wires, Lines Hoses Or Pipe..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Extreme Heat: Able To Withstand Continuous Exposure Of Up To 2000° F & Direct Contact Up To 500° Degrees.
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Outer Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are lightweight & slide over disconnected wires, lines hoses or pipe.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit. Rated for Extreme Heat: Able to withstand continuous exposure of up to 2000 F & Direct contact up to 500 degrees
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 inches
See On Amazon #5
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 21-26mm, 13/16 -1 Aprox. I.D, 6 Foot)
Asin: B07J1GDN7G | Model: AV | PartNumber: AV | Ean: 0742025421964, 0788536620472 | UPC: 788536620472, 742025421964
Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Under Hood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other under hood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 inches | Weight: 0.88 pounds
See On Amazon #6
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 18mm, 11/16 Aprox. I.D, 6 Foot)
Asin: B01EGU62CE | Model: ALHS AV | PartNumber: ALHS AV | Ean: 0788536622872 | UPC: 788536622872
Better Than Heavy Silicone Tape, Sleeves Are Lightweight & Slide Over Disconnected Wires, Lines Hoses Or Pipe..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Extreme Heat: Able To Withstand Continuous Exposure Of Up To 2000° F & Direct Contact Up To 500° Degrees.
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Outer Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are lightweight & slide over disconnected wires, lines hoses or pipe.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit. Rated for Extreme Heat: Able to withstand continuous exposure of up to 2000 F & Direct contact up to 500 degrees
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 Inches | Weight: 0.19 Pounds
See On Amazon #7
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 14mm, 9/16 Aprox. I.D, 3 Foot)
Asin: B01LZ81U8K | Model: E | PartNumber: E | Ean: 0728584192279 | UPC: 728584192279
Better Than Heavy Silicone Tape, Sleeves Are Lightweight & Slide Over Disconnected Wires, Lines Hoses Or Pipe..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Extreme Heat: Able To Withstand Continuous Exposure Of Up To 2000° F & Direct Contact Up To 500° Degrees.
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Outer Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are lightweight & slide over disconnected wires, lines hoses or pipe.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit. Rated for Extreme Heat: Able to withstand continuous exposure of up to 2000 F & Direct contact up to 500 degrees
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 inches
See On Amazon #8
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 18mm, 11/16 Aprox. I.D, 3 Foot)
Asin: B01EGUIUPG | Model: A | PartNumber: A | Ean: 0788536626511 | UPC: 788536626511
Better Than Heavy Silicone Tape, Sleeves Are Lightweight & Slide Over Disconnected Wires, Lines Hoses Or Pipe..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Extreme Heat: Able To Withstand Continuous Exposure Of Up To 2000° F & Direct Contact Up To 500° Degrees.
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Outer Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are lightweight & slide over disconnected wires, lines hoses or pipe.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit. Rated for Extreme Heat: Able to withstand continuous exposure of up to 2000 F & Direct contact up to 500 degrees
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 inches
See On Amazon #9
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 43mm, 1-11/16 Aprox. I.D, 6 Foot)
Asin: B077J7LBL6 | Ean: 0742025423807 | UPC: 742025423807
Better Than Heavy Silicone Tape, Sleeves Are Lightweight & Slide Over Disconnected Wires, Lines Hoses Or Pipe..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Extreme Heat: Able To Withstand Continuous Exposure Of Up To 2000° F & Direct Contact Up To 500° Degrees.
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Outer Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are lightweight & slide over disconnected wires, lines hoses or pipe.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit. Rated for Extreme Heat: Able to withstand continuous exposure of up to 2000 F & Direct contact up to 500 degrees
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 0.04 x 72.00 x 1.69 inches
See On Amazon #10
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 53mm, 2 Aprox. I.D, 3 Foot)
Asin: B01EGVSR5S | Model: JCP-ALHS-D | PartNumber: JCP-ALHS-D | Ean: 0788536622964 | UPC: 788536622964
Better Than Heavy Silicone Tape, Sleeves Are Lightweight & Slide Over Disconnected Wires, Lines Hoses Or Pipe..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Extreme Heat: Able To Withstand Continuous Exposure Of Up To 2000° F & Direct Contact Up To 500° Degrees.
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Outer Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are lightweight & slide over disconnected wires, lines hoses or pipe.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit. Rated for Extreme Heat: Able to withstand continuous exposure of up to 2000 F & Direct contact up to 500 degrees
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 inches | Weight: 0.31 pounds
See On Amazon #11
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 28mm, 1-1/8 Aprox. I.D, 6 Foot)
Asin: B01EGV7WLS | Model: B | PartNumber: B | Ean: 0788536626474 | UPC: 788536626474
Better Than Heavy Silicone Tape, Sleeves Are Lightweight & Slide Over Disconnected Wires, Lines Hoses Or Pipe..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Extreme Heat: Able To Withstand Continuous Exposure Of Up To 2000° F & Direct Contact Up To 500° Degrees.
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Outer Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are lightweight & slide over disconnected wires, lines hoses or pipe.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit. Rated for Extreme Heat: Able to withstand continuous exposure of up to 2000 F & Direct contact up to 500 degrees
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 inches
See On Amazon #12
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 28mm, 1-1/8 Aprox. I.D, 3 Foot)
Asin: B01EGUZB44 | Model: B | PartNumber: B | Ean: 0788536622902 | UPC: 788536622902
Better Than Heavy Silicone Tape, Sleeves Are Lightweight & Slide Over Disconnected Wires, Lines Hoses Or Pipe..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Extreme Heat: Able To Withstand Continuous Exposure Of Up To 2000° F & Direct Contact Up To 500° Degrees.
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Outer Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are lightweight & slide over disconnected wires, lines hoses or pipe.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit. Rated for Extreme Heat: Able to withstand continuous exposure of up to 2000 F & Direct contact up to 500 degrees
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
Dimensions: 3.00 x 6.00 x 1.00 Inches
See On Amazon #13
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 50-70mm 1-31/32'-2-3/4 Aprox. I.D, 10 Foot)
Asin: B07J1MDG1D | Model: AV | PartNumber: AV | Ean: 0742025421889 | UPC: 742025421889
Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Under Hood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other under hood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
See On Amazon #14
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 40-50mm 1-37/64'-1-31/32 Aprox. I.D, 10 Foot)
Asin: B07J1MCQHL | Model: AV | PartNumber: AV | Ean: 0742025421896 | UPC: 742025421896
Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Under Hood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other under hood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
See On Amazon #15
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 40-50mm 1-37/64'-1-31/32 Aprox. I.D, 3 Foot)
Asin: B07J1MCPJS | Model: AV | PartNumber: AV | Ean: 0742025421995 | UPC: 742025421995
Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Under Hood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other under hood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
See On Amazon #16
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 50-70mm 1-31/32'-2-3/4 Aprox. I.D, 3 Foot)
Asin: B07J1H5JJN | Model: AV | PartNumber: AV | Ean: 0742025421988 | UPC: 742025421988
Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Under Hood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other under hood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
See On Amazon #17
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 31-37mm 1-7/32 -1-15/32 Aprox. I.D, 3 Foot)
Asin: B07J1GCH3N | Model: AV | PartNumber: AV | Ean: 0742025422008 | UPC: 742025422008
Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Under Hood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other under hood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
See On Amazon #18
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 31-37mm 1-7/32 -1-15/32 Aprox. I.D, 10 Foot)
Asin: B07J1B28B3 | Model: AV | PartNumber: AV | Ean: 0742025421902 | UPC: 742025421902
Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Under Hood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other under hood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
See On Amazon #19
JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Hook & Loop 11-18mm, 7/16 -3/4 Aprox. I.D, 10 Foot)
Asin: B07J156GWY | Model: AV | PartNumber: AV | Ean: 0742025421926 | UPC: 742025421926
Better Than Heavy Silicone Tape, Sleeves Are Lightweight, Hook And Loop Seam Fastener Makes For An Easy Install, Removal & Adjustment..
Included Is Our Aluminum Termination Tape. Use It To Give A Finished Edge And Seam To Your Sleeve. Secure Your Work. Tape Can Be Cut In Strips To Maximize Coverage.
Reflects Over 90 % Of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable For A Tight Fit. Rated For Moderate Heat: Not Recommended For Use On Or Against Headers, Exhaust Pipes Or Extremely Hot Surfaces (The Melting Point Of The Hook & Loop Fastener Is About 325Fº) Can Be Used In About 90% Of The Under Hood Area When Installed With A Realistic Design Sense In Mind..
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Under Hood Hazards..
Features
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other under hood hazards.
- Better than Heavy Silicone Tape, Sleeves are Lightweight, Hook and Loop Seam Fastener makes for an easy install, removal & adjustment.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, lightweight, Pliable for a tight fit. Rated for MODERATE Heat: Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Hook & Loop fastener is about 325F ) Can be used in about 90% of the under hood area when installed with a realistic design sense in mind.
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
- See more on Amazon...
Brand: JC PERFORMANCE PRODUCTS USA | Manufacturer: JC PERFORMANCE PRODUCTS USA
See On Amazon
Looking For Something Else?
Search