Massive Pinion Flange Holding Tool Holder Yoke Wrench Made USA Compatible with Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana 3/8" THICK!
Asin: B07JGJ2LJ6 | Model: MATO'9524 V.2 | PartNumber: MATO'9524 V.2
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Massive Speed System | Manufacturer: Massive Speed System
Dimensions: 1.00 x 6.00 x 5.00 inches | Weight: 2.00 pounds
See On Amazon Similar To Massive Pinion Flange Holding Tool
#1
GEARWRENCH Ball Joint Separator - 3916D
Asin: B003YVWHOE | Model: 3916D | PartNumber: 3916D | Ean: 0082171391606 | UPC: 082171391606
Suitable For Most Cars And Light Trucks (Not Intended For Use On 3/4 Ton Or 1 Ton Trucks).
Slot Is 7/8" Wide By 1-1/4" Deep.
Works On Ball Joints From 1-1/8” To 2-1/8” And 30 To 56Mm In Size.
Adjustable For Different Size Ball Joints.
Features
- Gearwrench's Ball Joint Separator is made for separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles
- Adjustable for different size ball joints
- Suitable for most cars and light trucks (not intended for use on 3/4 ton or 1 ton trucks)
- Works on ball joints from 1-1/8 to 2-1/8 and 30 to 56mm in size
- Slot is 7/8 wide by 1-1/4 Deep
- See more on Amazon...
Brand: GEARWRENCH | Manufacturer: GEARWRENCH
Dimensions: 2.75 x 11.00 x 5.25 inches | Weight: 0.06 pounds
Warranty: Standard Limited Lifetime
See On Amazon #2
Sporthfish Stainless Steel Pinion Yoke Wrench Tool,Suitable for Various Styles of Yokes,Axles,Flanges;Fits for Most Sockets Extra 1/2" Hole;Strength Puller Suitable for loosening nuts flanges
Asin: B095SGS3FC | Model: AVOMARR-002 | PartNumber: AVOMARR-002 | Ean: 6215090058914
【Material】: Made Of High Quality Stainless Steel, Which Is Not Easy To Peel Off, And It Has A High Strength Characteristy. You Can Use This Tool To Handle The Crazy Torque Required To Get Your Job Done..
【Function】: Use A Pinion Wrench While Applying Torque. It Can Even Help You Loosen The Most Stubborn Pinion Nut. Use A Pinion Flange Tool With A Torque Wrench To Tighten The Fixing Bolts And Nuts. Or Used To Set The Bearing Preload. It Can Also Handle Other High-Torque Tasks, Such As Squeezing Sleeves..
【Sophisticated Design】: Usually The Yoke Flange Wrench Has Only One 1/2" Square Socket, But We Consider That You May Need To Use More Than One In The Work, So We Have Added An Additional 1/2" Square Socket. Plus, Our Stainless Steel Material Allows You To Use This Tool For Many Years..
【Size】: There Are A Variety Of Slotted Bolt Styles For 1/4", 5/16" And 3/8" Fasteners. Center Socket Hole Is 2". ("More Size Information Please Refer To Our Second Picture.").
Features
- Fitment : Compatible with most Ford, Dana, AMC and GM yokes. Suitable for almost all pinion gears and companion flanges.
- Size : There are a variety of slotted bolt styles for 1/4, 5/16 and 3/8 fasteners. Center socket hole is 2. (More Size Information Please Refer to Our Second Picture.)
- Material : Made of high quality stainless steel, which is not easy to peel off, and it has a high strength characteristy. You can use this tool to handle the crazy torque required to get your job done.
- Sophisticated Design : Usually the yoke flange wrench has only one 1/2 square socket, but we consider that you may need to use more than one in the work, so we have added an additional 1/2 square socket. Plus, our stainless steel material allows you to use this tool for many years.
- Function : Use a pinion wrench while applying torque. It can even help you loosen the most stubborn pinion nut. Use a pinion flange tool with a torque wrench to tighten the fixing bolts and nuts. Or used to set the bearing preload. It can also handle other high-torque tasks, such as squeezing sleeves.
- See more on Amazon...
Brand: Sporthfish | Manufacturer: AVOMARR
See On Amazon #3
Astro 605ST ONYX Straight Type Punch/Flange Tool
Asin: B0066LMK7S | Model: 605ST | PartNumber: 605ST | Ean: 7566908077344, 0745227016075, 0013222113700, 5272003724442 | UPC: 745227016075, 013222113700
Every Pull Of The Lever Delivers A Single Punch Or A Single Flange Crimp With Precision Control..
Reduces Metal Fabrication Time In Half.
Forms An Offset Crimped Edge On Sheet Metals For No-Bump Lay Welds.
Features A Rotating Head For Convenient Use.
Features
- Punch designed for easy replacement
- Features a rotating head for convenient use
- Every pull of the lever delivers a single punch or a single flange crimp with precision control.
- Forms an offset crimped edge on sheet metals for no-bump lay welds
- Reduces metal fabrication time in half
- See more on Amazon...
Brand: Astro Pneumatic Tool | Manufacturer: Astro Pneumatic Tool Company
Dimensions: 2.50 x 9.50 x 2.50 inches | Weight: 2.60 Pounds
See On Amazon #4
Mission Automotive Stainless Steel Pinion Yoke Wrench Tool Extra Strength Puller for Loosening Pinion Flange & Nuts Extra 1/2" Hole that Fits Most Sockets Works with Various Style Yokes,Flanges/Axles
Asin: B08MTDB8Z6 | Model: 5257 | PartNumber: 5257 | Ean: 0850020755257 | UPC: 850020755257
Holds The Yoke In Place -- Use The Pinion Wrench While Applying Torque. It Will Help You Loosen Even The Most Stubborn Pinion Nuts. For Leverage, Grab A 1/2” Breaker Bar Or 3/4” Drive Tool.
Additional 1/2" Square Socket -- Other Yoke Flange Wrenches Only Have One And Round Out Over Time. The Problem Is, For Tight Spaces, You Might Need Multiple. To Address This, We Added An Extra 1/2" Square Socket. Plus, Our Stainless Steel Will Prevent Any Rounding. You'll Be Able To Utilize Your Pinion Depth Setting Tool For Years.
Tighten Up -- Use The Pinion Flange Tool With A Torque Wrench To Tighten Retaining Bolts And Nuts. Or For Setting The Bearing Pre-Load. It Can Also Handle Other High Torque Tasks, Like Crush Sleeves.
Compatible With -- Our Pinion Yoke Wrench Is Compatible With Most Ford, Amc, Dana, And Gm Yokes. Fits Almost All Pinion And Companion Flanges. There Are Multiple Slotted Bolt Patterns For 1/4", 5/16" And 3/8" Fasteners. The Center Socket Hole Is 2".
Features
- Extra Strength -- Instead of soft carbon steel that strips out easily, we crafted our flange wrench with Stainless Steel. Utilize this tool to handle the insane amount of torque needed to get the job done
- Compatible With -- Our pinion yoke wrench is compatible with most Ford, AMC, Dana, and GM yokes. Fits almost all pinion and companion flanges. There are multiple slotted bolt patterns for 1/4, 5/16 and 3/8 fasteners. The center socket hole is 2
- Holds The Yoke In Place -- Use the pinion wrench while applying torque. It will help you loosen even the most stubborn pinion nuts. For leverage, grab a 1/2 breaker bar or 3/4 drive tool
- Tighten Up -- Use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. Or for setting the bearing pre-load. It can also handle other high torque tasks, like crush sleeves
- Additional 1/2 Square Socket -- Other yoke flange wrenches only have one and round out over time. The problem is, for tight spaces, you might need multiple. To address this, we added an extra 1/2 square socket. Plus, our stainless steel will prevent any rounding. You'll be able to utilize your pinion depth setting tool for years
- See more on Amazon...
Brand: Mission Automotive | Manufacturer: Mission Automotive
See On Amazon #5
Harmonic Damper Pulley Holding Tool Crankshaft Holder compatible with Toyota Tacoma 4Runner T100 Tundra Pickup
Asin: B07NRGRYM1 | Model: 13 | PartNumber: 13 | Ean: 7426928512150
Nice Design: Unique Two Pins Design Holds The Harmonic Damper Pulley Compatible With Toyota 3.4 Liter V6 Engines For Crank Bolt R&R..
Satisfaction Guarantee: If You're Not 100% Satisfied With Your Harmonic Tool, Simply Return It For A Full Refund, Guarantee With 1-Year’S Warrant..
Excellent Function：Design To Seat The Pulley Properly, Holds The Pulley Stationary For The Center Bolt To Be Removed, Necessary For Both Removing And Installing..
Durable Material: Made Of High Quality Metal Material, Solid And Durable, Ensures A Long Term Service..
Features
- GREAT FITMENT: Fit for 4 Runner 1996-2002, T100 pickup 1996-1998, Tacoma pickup 1996-2004 and Tundra pickup 2000-2004.
- DURABLE MATERIAL: Made of high quality metal material, solid and durable, ensures a long term service.
- NICE DESIGN: Unique two pins design holds the harmonic damper pulley compatible with Toyota 3.4 liter V6 engines for crank bolt R&R.
- EXCELLENT FUNCTION Design to seat the pulley properly, holds the pulley stationary for the center bolt to be removed, necessary for both removing and installing.
- SATISFACTION GUARANTEE: If you're not 100% satisfied with your harmonic tool, simply return it for a full refund, guarantee with 1-year s warrant.
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #6
8MILELAKE Straight Punch Flange Tool
Asin: B07KS2V3TJ | Ean: 0733810492900 | UPC: 733810492900
Every Pull Of The Lever Delivers A Single Punch Or A Single Flange Crimp With Precision Control..
Suitable For Automotive Sheet Metal, Iron Plate, P-Lastic, Machinery, Etc..
The Internal Dust-Proof Net Structure Effectively Averts Foreign Matter From Entering The Machine Body..
Features A Rotating Head For Convenient Use.
Features
- 2 in 1 pneumatic tool easily punches holes and flanges edges in sheet metal for creating and installing patch panels, replacement panels, or custom sheet metal work.
- Features a rotating head for convenient use
- Every pull of the lever delivers a single punch or a single flange crimp with precision control.
- The internal dust-proof net structure effectively averts foreign matter from entering the machine body.
- Suitable for automotive sheet metal, iron plate, p-lastic, machinery, etc.
- See more on Amazon...
Brand: 8MILELAKE | Manufacturer: freebirdtrading
Dimensions: 1.69 x 4.53 x 2.83 Inches
See On Amazon #7
E-cowlboy Universal Wrench Camshaft Injection Pump Cam Pulley Holder Sprocket Holding Tool for Honda & Toyota
Asin: B07Q1KPDP2 | Model: Universal Wrench | PartNumber: Universal Wrench | Ean: 7426928518541
Function: This Holding Tool Is Used To Hold Camshaft Gears Stationary, Injection Pump, Other Gears And Pulleys For Both Loosening And Tightening Cam Pulley Bolts..
Satisfaction Guarantee: If You're Not 100% Satisfied With This Cam Pulley Holder, Simply Return It For A Full Refund In 30 Days, No Questions Asked Money Back Guarantee With 12 Months’ Warranty.
A Must Have Tool: Detent Grooves On Holding Pins Gives User A Sure Hold To Use As A Counter Holder When Loosening Or Tightening Sprocket Retainer Bolts.
Excellent Design: Made Of High Quality Steel For Durability And Perfect Match, Non-Slip Rubber Grip. Long Handle Enables Technician To Easily Hold The Pulley When Tightening Or Loosening Retaining Nuts And Bolts.
Features
- PERFECT FITMENT: Works on all models with sprocket holes larger than 12mm (1/2") & hole separations from 19mm to 190mm (3/4"-7.5"), such as Audi, Dodge, Ford, GM, Honda, Mazda, Rover,Toyota, Volvo and so on
- EXCELLENT DESIGN: Made of high quality steel for durability and perfect match, non-slip rubber grip. Long handle enables technician to easily hold the pulley when tightening or loosening retaining nuts and bolts
- FUNCTION: This holding tool is used to hold camshaft gears stationary, injection pump, other gears and pulleys for both loosening and tightening cam pulley bolts.
- A MUST HAVE TOOL: Detent grooves on holding pins gives user a sure hold to use as a counter holder when loosening or tightening sprocket retainer bolts
- SATISFACTION GUARANTEE: If you're not 100% satisfied with this Cam Pulley Holder, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months warranty
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: Bird's wings
Warranty: 1 year warranty
See On Amazon #8
Deluxe Differential Pinion Shaft Lock Nut Bolt Extractor Kit
Asin: B007ZS4I3U | Ean: 0610370902431 | UPC: 610370902431
The Extracting Procedure Can Be Accomplished In Approximately Five Minutes.
Features
- For GM and Ford integral rear ends
- The extracting procedure can be accomplished in approximately five minutes
- See more on Amazon...
Manufacturer: Skyway Tool Center
Dimensions: 1.00 x 12.00 x 1.00 Inches | Weight: 0.00 Pounds
See On Amazon #9
Lkonwee Stainless Steel Pinion Yoke Wrench Tool - Extra Strength Puller for Loosening Pinion Flange and Nuts that Fits Most Sockets - Works with Various Style Yokes, Flanges, or Axles
Asin: B092V3Q5J4 | Ean: 0770619593278 | UPC: 770619593278
Holds The Yoke In Place -- Use The Pinion Wrench While Applying Torque. It Will Help You Loosen Even The Most Stubborn Pinion Nuts. For Leverage, Grab A 1/2” Breaker Bar Or 3/4” Drive Tool.
Is Stainless Steel To Handle Very High Torque -Holds A Sturdy Shape.
Simple Operation For Installation And Removal Of Pinion Yoke.
Tighten Up -- Use The Pinion Flange Tool With A Torque Wrench To Tighten Retaining Bolts And Nuts. Or For Setting The Bearing Pre-Load. It Can Also Handle Other High Torque Tasks, Like Crush Sleeves.
Features
- Compatible With -- Our pinion yoke wrench is compatible with most Ford, AMC, Dana, and GM yokes. Fits almost all pinion and companion flanges. There are multiple slotted bolt patterns for 1/4", 5/16" and 3/8" fasteners.
- Tighten Up -- Use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. Or for setting the bearing pre-load. It can also handle other high torque tasks, like crush sleeves
- Holds The Yoke In Place -- Use the pinion wrench while applying torque. It will help you loosen even the most stubborn pinion nuts. For leverage, grab a 1/2 breaker bar or 3/4 drive tool
- SIMPLE OPERATION for installation and removal of pinion yoke
- Is stainless steel to handle very high torque -Holds a sturdy shape
- See more on Amazon...
Brand: Lkonwee | Manufacturer: Lkonwee
Dimensions: 1.00 x 5.00 x 5.00 Inches | Weight: 0.76 pounds
See On Amazon #10
Kujunpao Pinion Holding Tool Holder Yoke Wrench Compatible with Various Style Yokes, Flanges, or Axles Fit for Most Sockets extra 1/2" Hole
Asin: B095SLB9PK | Model: Kujunpao-0095 | PartNumber: Kujunpao-0095 | Ean: 6092529923308
The Extra 1 / 2 "Square Socket Helps You Use The Yoke Flange Wrench Tool Many Times In A Compact Space.
Please Check Whether Your Model Is Suitable For Our Products Before Purchase. If There Is Any Problem With Our Products, Please Feel Free To Contact Us, We Will Solve The Problem For You At The First Time And Provide You With The Best After-Sales Service..
A Simple Pinion Wrench Tool Helps You Loosen The Stubborn Pinion Nut. In The Process Of Use, You Can Grasp The 1 / 2 "Circuit Breaker Rod Or 3 / 4" Drive Tool As A Lever To Improve Your Work Efficiency..
Made Of High Quality Stainless Steel. Compared With Ordinary Material Wrench, It Can Be Firmly Fixed In The Required Position Without Bending, Prevent Rounding Over Time, And Provide Huge Torque Value..
Features
- Compatible with most Ford, AMC, Dana, and GM yokes Various Style Yokes, Flanges, or Axles ,work fit for Most Sockets extra 1/2" Hole
- Made of high quality stainless steel. Compared with ordinary material wrench, it can be firmly fixed in the required position without bending, prevent rounding over time, and provide huge torque value.
- The extra 1 / 2 square socket helps you use the yoke flange wrench tool many times in a compact space
- A simple pinion wrench tool helps you loosen the stubborn pinion nut. In the process of use, you can grasp the 1 / 2 circuit breaker rod or 3 / 4 drive tool as a lever to improve your work efficiency.
- Please check whether your model is suitable for our products before purchase. If there is any problem with our products, please feel free to contact us, we will solve the problem for you at the first time and provide you with the best after-sales service.
- See more on Amazon...
Brand: Kujunpao | Manufacturer: Kujunpao
See On Amazon #11
Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.
Asin: B07Y7VT7KN | Ean: 7426999803416
Application: Harmonic Damper Pulley Tool Holds The Pulley Stationary For The Center Bolt To Be Removed Without An Impact, Great For Timing Belt Replacement; Cam Holding Tool Is Great For Timing Belt Changes, Cam Seal Replacement, Cam Gear Removal, Camshaft Pulleys Installation Etc..
Satisfaction Guarantee: If You're Not 100% Satisfied With Sunluway Cam Pulley Holders, Simply Return It For A Full Refund In 30 Days. Premium Support & 12 - Month Warranty.
A Must-Have Tool Kit: Harmonic Damper Pulley Tool Saves Your Time For The Work On Toyota Timing Belts Or To Remove The Crankshaft Pulley; Crankshaft Pulley Holder Holds The Pulley To Stop It From Spinning While Tightening/Loosening The Bolt.
High Quality: This Tool Kit Is Constructed From High Quality 40Cr Steel To Provide Enough Strength And Durability; And The Powder Coating Is Resistant To Cracking, Abrasion, Rust And Damage Due To Chemical Exposure.
Features
- FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998; Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase )
- HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability; and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure
- APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement; Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc.
- A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley; Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt
- SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12 - Month Warranty
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #12
Pinion Flange Holding Tool Holder Yoke Wrench Compatible with Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana
Asin: B0CTX5YWGZ | Model: 9524 | PartNumber: 9524
Advantages: The Big Gear Flange Fixing Tool Bracket Yoke Wrench Facilitates Quicker And More Efficient Installation Of Ring Gears Or Replacement Of Leaking Pinion Seals. It Significantly Enhances Work Productivity..
Exceptional Service Support: Prior To Purchase, Please Verify Compatibility With Your Model. Should You Encounter Any Issues With Our Products, Don't Hesitate To Reach Out. We're Committed To Promptly Resolving Any Concerns And Providing Top-Notch After-Sales Support..
Package Contents: Each Set Includes A Yoke Wrench Designed To Securely Hold The Tool Bracket For The Big Gear Flange..
Outstanding Design: Crafted From High-Quality Solid 3/8" Thick Steel, This Tool Surpasses Ordinary Wrenches In Durability And Functionality. Its Sturdy Construction Ensures A Secure Grip Without Bending, Allowing For Considerable Torque. Whether You're Removing Or Installing The Nut, It Firmly Holds The Pinion Yoke Or Flange In Place..
Features
- Application: The Pinion Yoke Wrench Tool is specifically designed for Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana.
- Outstanding Design: Crafted from high-quality solid 3/8 thick steel, this tool surpasses ordinary wrenches in durability and functionality. Its sturdy construction ensures a secure grip without bending, allowing for considerable torque. Whether you're removing or installing the nut, it firmly holds the pinion yoke or flange in place.
- Advantages: The Big Gear Flange Fixing Tool Bracket Yoke Wrench facilitates quicker and more efficient installation of ring gears or replacement of leaking pinion seals. It significantly enhances work productivity.
- Package Contents: Each set includes a yoke wrench designed to securely hold the tool bracket for the big gear flange.
- Exceptional Service Support: Prior to purchase, please verify compatibility with your model. Should you encounter any issues with our products, don't hesitate to reach out. We're committed to promptly resolving any concerns and providing top-notch after-sales support.
- See more on Amazon...
Brand: Rogierra | Manufacturer: Rogierra
See On Amazon #13
ProForm Pinion Depth Setting Tool with Case
Asin: B000630IFI | Model: 66516 | PartNumber: 66516 | Ean: 0037995365166 | UPC: 037995365166
Fit Type: Vehicle Specific.
Country Of Origin : Taiwan.
Package Weight: 2.5 Pounds.
Features
- Package Dimensions: 10.414 H x 23.876 L x 18.541 W (centimetres)
- Package Weight: 2.5 pounds
- Fit type: Vehicle Specific
- Country of Origin : Taiwan
- See more on Amazon...
First Available: 06/05/2012
Brand: ProForm | Manufacturer: Proform
Dimensions: 5.50 x 9.50 x 7.50 inches | Weight: 0.00 pounds
Warranty: 1 Year
See On Amazon #14
Lisle 18000 Universal Camshaft Bearing Tool,Black
Asin: B0002SQZQ8 | Model: 18000 | PartNumber: 18000 | Ean: 0083045180005, 0083045180203, 0814227017136 | UPC: 083045180005, 814227017136, 083045180203
One Complete Low Cost Set That Will Remove Or Insert Camshaft Bearings In Nearly All Engines From Compact Cars To Heavy Trucks..
The Expander Has A Neoprene Sleeve Over Which The Split Driving Plugs Are Mounted & Expanded To Size. This Tool Has Two Sets Of Rubber Sleeves Supplied W/ It For Each Expanding Driver..
Range Of 1.1 25" To 2.69" (28.58 - 68.3Mm). Easy On Bearings..
Includes: Driving Shaft, Driving Shaft Extension, Expander Unit, Five Split Driving Plugs, Two Driving Collars, Centering Cone & Blow Molded Case..
Features
- Drives camshaft bearings smoothly
- Includes: Driving shaft, driving shaft extension, expander unit, five split driving plugs, two driving collars, centering cone & blow molded case.
- One complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks.
- Range of 1.1 25 to 2.69 (28.58 - 68.3mm). Easy on bearings.
- The expander has a neoprene sleeve over which the split driving plugs are mounted & expanded to size. This tool has two sets of rubber sleeves supplied w/ it for each expanding driver.
- See more on Amazon...
Brand: Lisle | Manufacturer: Lisle
Dimensions: 4.00 x 31.30 x 6.90 Inches | Weight: 7.71 pounds
Warranty: Lifetime Warranty - does not cover abuse or misuse
See On Amazon #15
Universal Camshaft and Diesel Injection Pump Sprocket Pulley Counter Holder Cam Pulley Holding Tool Fit for Dodge, Ford, GM, Honda, Mazda, Nissan, Toyota, Volvo etc.
Asin: B07LCF3SNF | Ean: 7426928510828
Applicaton: Great Holding Tool For Timing Belt Changes, Cam Seal Replacement, Cam Gear Removal, Camshaft Pulleys Installation Etc., Also Works On Diesel Injection Pump Or Water Pump.
Satisfaction Guarantee: If You're Not 100% Satisfied With This Cam Pulley Holder, Simply Return It For A Full Refund In 30 Days. Premium Support & 12-Month Warranty.
A Must-Have: Using This Sturdy Tool To Hold Camshaft Sprockets Stationary To Remove The Bolts, Which Will Work Well To Hold The Pulley To Stop It From Spinning While Tightening/Loosening The Bolt.
Heavy-Duty Specialized Wrench: Made Of High Quality Steel For Durability And Perfect Match, Hold The Camshaft Stationary During Removal And Installation Of Sprocket Retaining Nuts And Bolts.
Features
- FITMENT: Works on all models with sprocket holes larger than 12mm (1/2") & hole separations from 19mm to 190mm (3/4"-7.5"), fits for Audi, Dodge, Ford, GM, Honda, Mazda, Nissan, Rover, Toyota, Volvo and so on
- HEAVY-DUTY SPECIALIZED WRENCH: Made of high quality steel for durability and perfect match, hold the camshaft stationary during removal and installation of sprocket retaining nuts and bolts
- APPLICATON: Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc., also works on diesel injection pump or water pump
- A MUST-HAVE: Using this sturdy tool to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt
- SATISFACTION GUARANTEE: If you're not 100% satisfied with this Cam Pulley Holder, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #16
Pinion Yoke Wrench Tool -Stainless Steel Extra Strength Puller for Loosening Pinion Flange and Nuts - Extra 1/2" Hole that Fits Most Sockets
Asin: B096KCW3PT | Ean: 6092529921687
【Function】Holds The Yoke In Place,Use A Pinion Wrench While Applying Torque. It Can Help You Loosen The Most Stubborn Pinion Nut.You Also Can Grasp The 1 / 2 "Circuit Breaker Rod Or 3 / 4" Drive Tool As A Lever To Improve Your Work Efficiency..
【Upgrade Design】: Usually The Yoke Flange Wrench Has Only One 1/2" Square Socket, But We Consider That You May Need To Use More Than One During The Work, So We Have Added An Additional 1/2" Square Socket. Plus, Our Stainless Steel Material Allows You To Use This Tool For Many Years..
【Material】Made Of High Quality Stainless Steel, It Can Handle Very High Torque Needed .Compare With Soft Carbon Steel ,This Flange Wrench Not Easy To Bend ,Holds A Original Shape..
【Applicable Size】There Are A Variety Of Slotted Bolt Styles For 1/4", 5/16" And 3/8" Fasteners. The Center Socket Hole Is 2"..
Features
- Compatible with Suitable for most most Ford, Dana, AMC and GM yokes. Fits for almost all pinion and companion flanges.
- Applicable size There are a variety of slotted bolt styles for 1/4, 5/16 and 3/8 fasteners. The center socket hole is 2.
- Function Holds the yoke in place,Use a pinion wrench while applying torque. It can help you loosen the most stubborn pinion nut.you also can grasp the 1 / 2 circuit breaker rod or 3 / 4 drive tool as a lever to improve your work efficiency.
- Material Made of high quality stainless steel, it can handle very high torque needed .Compare with soft carbon steel ,this flange wrench not easy to bend ,holds a original shape.
- Upgrade Design : Usually the yoke flange wrench has only one 1/2 square socket, but we consider that you may need to use more than one during the work, so we have added an additional 1/2 square socket. Plus, our stainless steel material allows you to use this tool for many years.
- See more on Amazon...
Brand: YANWEN | Manufacturer: Topexam
Dimensions: 0.79 x 2.76 x 3.54 inches | Weight: 0.44 Pounds
See On Amazon #17
Differential Pinion Depth Gauge Checker Tool Kit Fit For GM 10-14 Bolt, Ford 7.5'' 8'' 8.8'' 9'', Dana 30-80, And Most Differentials Replace For 11001 Pinion Depth Checker
Asin: B0BTBGGVBF | Model: HI-11001 | PartNumber: HI-11001
Package Include: This Deluxe Pinion Depth Checker Tool Kit Includes 1 Travel Dial Indicator, 3 Extensions With Calibration Tubes, Two Pair Of Hubs That Have Three Diameters Each, 2 Target Plates And 1 Precision Ground Cross Shaft..
Satisfaction Guarantee--100% Satisfaction Guarantee. Please Feel Free To Contact Us If You Have Any Questions About Our Product..
Material: This Pinion Depth Checker Kit Made Of Aluminum Alloy, Steel And Magnet. Sturdy And Durable. Note: Before Attempting Calibration, Carefully Clean All Parts. Any Dirt Can Prevent A Correct Calibration..
Function: The Pinion Depth Checker Kit Is A Very Accurate Method Of Setting Pinion Depth In A Large Number Of Automotive Differentials. Alternative For T&D Machine Products 11001 Deluxe Pinion Depth Checker..
Features
- APPLICATION: This pinion depth checker kit is designed to work on most differentials. Such as compatible with GM 10 bolt & 12 bolt and early GM "B", "P" and "O" and GM 9.5, 10.5, and 14 bolt. For Most Dana axles up to Dana 80. For Ford 7.5'', 8.0'', 8.8'', 9.0''. Fit for Chrysler 8-3/4''.
- FUNCTION: The pinion depth checker kit is a very accurate method of setting pinion depth in a large number of automotive differentials. Alternative for T&D Machine Products 11001 Deluxe Pinion Depth Checker.
- PACKAGE INCLUDE: This deluxe pinion depth checker tool kit includes 1 travel dial indicator, 3 extensions with calibration tubes, two pair of hubs that have three diameters each, 2 target plates and 1 precision ground cross shaft.
- MATERIAL: This pinion depth checker kit made of Aluminum alloy, steel and magnet. Sturdy and durable. Note: Before attempting calibration, carefully clean all parts. Any dirt can prevent a correct calibration.
- Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product.
- See more on Amazon...
Brand: Hihitomorrow
Dimensions: 2.48 x 16.45 x 10.55 Inches
See On Amazon #18
OTC 6883 Pinion Flange Holding Tool for Most Ford, Lincoln, and Mercury Applications
Asin: B0872J58NV | Model: 6883 | PartNumber: 6883 | Ean: 0731413591686 | UPC: 731413591686
Features A 1/2 Inch Square Drive Opening In Handle For Extra Leverage.
Similar To Oe Part Number 303-126; Made In The Usa.
Set Includes: Flange Bar, 2Ea. 5/16 Inch Bolts, Nuts, And Washers, And 2Ea. 3/8 Inch Bolts, Nuts, And Washers.
Fits Most Ford, Lincoln, And Mercury Drive Pinion Flanges.
Features
- OTC's 6883 Pinion Flange Tool is designed to hold drive pinion flanges - universal design with 1/2 inch slots fits flange bolt centerlines up to 2-5/8 inches
- Fits most Ford, Lincoln, and Mercury drive pinion flanges
- Features a 1/2 inch square drive opening in handle for extra leverage
- Set includes: flange bar, 2ea. 5/16 inch bolts, nuts, and washers, and 2ea. 3/8 inch bolts, nuts, and washers
- Similar to OE part number 303-126; made in the USA
- See more on Amazon...
Brand: Robinair | Manufacturer: OTC
Dimensions: 2.00 x 16.50 x 2.00 Inches | Weight: 2.00 Pounds
Warranty: Per Contract with Amazon
See On Amazon #19
Kujunpao Pinion Flange Holding Tool Holder Yoke Wrench Fit for Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana
Asin: B094VM8D6P | Ean: 6092529923346
Advantage：Big Gear Flange Fixing Tool Bracket Yoke Wrench Can Help You Install Ring Gear Better And Faster Or Replace Leaking Pinion Seal, Improve Your Work Efficiency..
Great Service Support:Please Check Whether Your Model Is Suitable For Our Products Before Purchase. If There Is Any Problem With Our Products, Please Feel Free To Contact Us, We Will Solve The Problem For You At The First Time And Provide You With The Best After-Sales Service..
Package Includes：A Set Of Yoke Wrench For Fixing Tool Bracket Of Big Gear Flange.
Excellent Design： Made Of High-Quality Solid 3 / 8 "Thick Steel. Compared With The Wrench Made Of Ordinary Materials, It Can Be Firmly Fixed In The Required Position Without Bending, Providing A Huge Torque Value. When Removing Or Installing The Nut, It Can Fix The Pinion Yoke Or Flange In Place.
Features
- Application Work fit for Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana
- Excellent design Made of high-quality solid 3 / 8 thick steel. Compared with the wrench made of ordinary materials, it can be firmly fixed in the required position without bending, providing a huge torque value. When removing or installing the nut, it can fix the pinion yoke or flange in place
- Advantage Big gear flange fixing tool bracket yoke wrench can help you install ring gear better and faster or replace leaking pinion seal, improve your work efficiency.
- Package includes A set of yoke wrench for fixing tool bracket of big gear flange
- Great Service Support:Please check whether your model is suitable for our products before purchase. If there is any problem with our products, please feel free to contact us, we will solve the problem for you at the first time and provide you with the best after-sales service.
- See more on Amazon...
Brand: Kujunpao | Manufacturer: Kujunpao
See On Amazon
Looking For Something Else?
Search