KOLERFLO Hot Water Flow Sensor Switch,AC 110V G3/4 -1/2 Flow Switch for Shower Booster Pump(120W)
Asin: B07JVCNC71 | Model: KF-FS-001 | PartNumber: KF-FS-001 | Ean: 0681013755943 | UPC: 681013755943
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Automatically Turn On Or Turn Off The Pump.
120W Water Flow Switch.
Features
- Specially designed for Kolerflo water pressure pump
- 120W water flow switch
- Automatically turn on or turn off the pump
- See more on Amazon...
Brand: KolerFlo | Manufacturer: KOLERFLO
Dimensions: 1.80 x 4.80 x 2.10 inches | Weight: 0.40 Pounds
See On Amazon Similar To KOLERFLO Hot Water Flow Sensor
#1
KOLERFLO Water Recirculating Pump 3/4 Inch Circulating Water Pump for Water Heater System
Asin: B07D53C4F6 | Ean: 0652054530943 | UPC: 652054530943
Prevent Pipes From Freezing In Winter, Especially For Cold Winter Areas. In Addition, If Your Pipes Pass Through The Floor, The Floor Will Also Become Warm..
Kolerflo Circulation Water Pump Rs15-6 Used In Suitable For City Buildings, Suburban Villas, Houses, Water And Pressurized With Industrial Equipment, Air Conditioning, Boilers, Solar Circulating Water, Hot Water Circulating Warm And So On..
The Circulation Water Pump Features High Efficiency With Low Consumption. High Temperature Resistance, Anti-Fraying, High Flow And Leak-Tightness. Super Silent, Environmental Friendly,Saving Energy, Running Power, Reducing The Waste Of Cold Water And Waiting Time, Suitable For Water Scarce Areas, Such As Desert Areas..
Easy Installation, Only Need A Wrench To Connect The Pump To The Pipeline, Saving You The Cost Of Plumbers; Instant Hot Water, Waiting For 2-3 Minutes In The Past, Now It Takes Only 15 Seconds To Get Hot Water..
Features
- Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft);Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
- Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers; Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water.
- Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
- KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
- See more on Amazon...
Brand: KolerFlo | Manufacturer: KOLERFLO
Dimensions: 4.92 x 5.12 x 5.12 inches | Weight: 5.54 Pounds
See On Amazon #2
RecPro Replacement Tankless Water Heater Water Flow Sensor
Asin: B09K26RZDS | Model: RWH-1 | PartNumber: RWH-1 | Ean: 0193652049432 | UPC: 193652049432
Dimensions: 3" X 1 1/8" X 1 1/8".
3-Pin Connector Installed Directly To Water Heater.
Pins On Either Side To Keep It In Place.
Detects The Presence Of Water Flow To Turn On The Water Heater.
Features
- Tankless Water Heater Water Flow Sensor
- Detects the presence of water flow to turn on the water heater
- Dimensions: 3 x 1 1/8 x 1 1/8
- Pins on either side to keep it in place
- 3-pin connector installed directly to water heater
- See more on Amazon...
Brand: RecPro | Manufacturer: RecPro
See On Amazon #3
HiLetgo G1/2" Water Flow Hall Sensor Switch 1-30L/min 1.75MPa Flow Meter Flowmeter Counter Water Flow Sensor
Asin: B01N2NJQHD
Maximum Operating Current: 15 Ma (Dc 5V).
Load Capacity: 10 Ma (Dc 5V).
Working Voltage Range: Dc 5~18 V.
The Lowest Rated Working Voltage: Dc4.5 5V-24V.
Features
- 1-30L/min 1.75MPa 1/2" Hall Effect Flowmeter Control Water Flow Sensor
- The lowest rated working voltage: DC4.5 5V-24V
- Maximum operating current: 15 mA (DC 5V)
- Working voltage range: DC 5~18 v
- Load capacity: 10 mA (DC 5V)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
Water Flow Sensor, YF-S402 0.3-6L 2 Water Flow Sensor Control Flow Meter G1 / 4 for Water Cooler Liquid Level Sensor
Asin: B07SF5P631 | Ean: 0746771157078 | UPC: 746771157078
Brand: Keenso | Manufacturer: Keenso
Dimensions: 1.57 x 1.57 x 1.57 inches
See On Amazon #5
Upgraded Brass Water Flow Sensor 4 Male Effect Sensor Switch Meter Length for Water Heater/Water Dispenser Effect Sensor
Asin: B0D48XMDZC | Ean: 7629662736626
Wiring: Red-In For Posotive, Yellow-Out For Output, Black-Gnd For Negative..
Brass, All Materials Are In Line- With Rohs- Testing Standards..
Suitable For Water Heater, Water Dispenser, Water.
Waterproof, Heat Resistance-, Pressurresistance, Cold Resistance-, Small Size, Stable And Easy To Install..
Features
- Working range: 1-30L/min, water pressure: 1.75mpa.
- Waterproof, heat resistance-, pressurresistance, cold resistance-, small size, stable and Easy to install.
- Wiring: Red-In for posotive, Yellow-out for output, Black-GND for negative.
- Suitable for water heater, water dispenser, water
- brass, all materials are in line- with ROHS- testing standards.
- See more on Amazon...
Brand: PURPLELILY | Manufacturer: PURPLELILY
See On Amazon #6
Fankerba - 1/2" Water Heater Flow Sensor YF-S201 / Water Flowmeter Hall Switch for Credit Card Machine/Water Dispenser,1-30L/min,High Precision
Asin: B07DCTZ1WK | Ean: 0717410529921 | UPC: 717410529921
Moisture Resistance:Durability:At Normal Temperature, 0.1 Mpa Water Pressure Is Introduced From The Water Inlet To Turn On 1 S, And 0.5 S Is Turned Off.The Test Was Conducted 300,000 Times Without Abnormality..
Cold Resistance:It Is Placed In The Environment Of -20±3℃/-4± 37.4℉ For 48H, And Returns To Normal Temperature For 1-2H Without Abnormality, And The Parts Have No Crack, Slack, Expansion, Deformation, Etc., And The Precision Changes Within 10%..
Heat Resistance:It Is Placed In The Environment Of 80±3℃ /176±37.4℉ For 48H, And Returns To Normal Temperature For 1-2H Without Abnormality, And The Parts Have No Crack, Slack, Expansion, Deformation, Etc., And The Precision Changes Within 10%..
Wiring: Red In Is Connected To The Positive Pole ; Yellow Out Signal Output Line ; Black Gnd Is Connected To The Negative Pole..
Features
- Apply to water heaters, credit card machines, water vending machines, and other flow measurement devices!
- Wiring: Red IN is connected to the positive pole ; Yellow OUT signal output line ; Black GND is connected to the negative pole.
- Moisture resistance:Durability:At normal temperature, 0.1 MPa water pressure is introduced from the water inlet to turn on 1 S, and 0.5 S is turned off.The test was conducted 300,000 times without abnormality.
- Heat resistance:It is placed in the environment of 80 3 /176 37.4 for 48h, and returns to normal temperature for 1-2h without abnormality, and the parts have no crack, slack, expansion, deformation, etc., and the precision changes within 10%.
- Cold resistance:It is placed in the environment of -20 3 /-4 37.4 for 48h, and returns to normal temperature for 1-2h without abnormality, and the parts have no crack, slack, expansion, deformation, etc., and the precision changes within 10%.
- See more on Amazon...
Brand: Fankerba | Manufacturer: FUNUANBANG
See On Amazon
Looking For Something Else?
Search