uxcell 1/8" Shank 2.0mm x 8mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood
Asin: B07KFSLCW5 | Model: a18092800ux0262 | PartNumber: a18092800ux0262
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Spiral & Sharp Router Bits: Large Chip Space Design For Fast And Clean Chip Removal. Spiral Sharp Cutting Edges Provide Smooth Cuts And No Burrs For Increased Efficiency, Not Easy To Stick, Precision Ground..
Tips: Upcut Milling Bits Can Direct Chips Up And Away From The Milling Area, Leaving An Unobstructed Path To Prevent Tool Breakage And Extends The Tool Life. Properly Reduce The Cutting Speed And Feed Rate To Prolong The Service Life..
Carbide End Mills: Tungsten Carbide Has Good Wear Resistance, High Strength And Resistance To Cutting Temperatures. Carbide Can Run At Higher Speed Than High-Speed Steel. Chamfered Shank For Ease Of Use.
Wide Applications: Cnc Router Bits Are Suitable For Acrylic, Pvc, Wood, Nylon, Resin, Abs, Mdf, Plywood, Hardwood. Good For 2D Sculpturing, Cutting, Engraving, Slotting, Milling, Etc. Works With Milling And Engraving Machines..
Features
- 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8"; Cutting Diameter: 2.0mm / 0.08"; Cutting Length: 8mm / 0.31"; Overall Length: 38mm / 1.5"; Number of Flutes: 2 Flutes
- Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines.
- Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground.
- Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use
- Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 2.36 x 1.97 inches
See On Amazon Similar To uxcell 1 8 Shank 2.0mm
#1
uxcell H4 Shank 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm 6 Points Hex Socket 6 in 1
Asin: B016E9WJZO | Model: a15052300ux0043 | PartNumber: a15052300ux0043 | Ean: 0712662216513 | UPC: 712662216513
Weight: 27G.
Hex Shank Size: H4.
Main Color: Silver Tone.
Product Name: 6 Point Hex Socket.
Features
- Main Material: Metal; Package Content: 6 x 6 Point Hex Socket
- Product Name: 6 Point Hex Socket
- Weight: 27g
- Main Color: Silver Tone
- Hex Shank Size: H4
- See more on Amazon...
Brand: uxcell | Manufacturer: Uxcell
Dimensions: 0.28 x 1.10 x 0.28 inches | Weight: 0.00 pounds
See On Amazon #2
uxcell Machine Tap 2-56 UNC Thread 2A High Speed Steel Screw Taps Threading Tapping Tool
Asin: B07Y4YHDTF | Model: a19081500ux0004 | PartNumber: a19081500ux0004
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: 2-56 UNC; Class: 2A; Thread Length: 13mm / 0.51 inch; Total Length: 42mm / 1.65 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
Asin: B08ZM5897V | Model: a20102800ux0555 | PartNumber: a20102800ux0555
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell a15091700ux0629 200 Pcs 1/8" x 1/4" Aluminium Round Head Solid Rivets Knurled Shanks (Pack of 200)
Asin: B018HMF6CO | Model: a15091700ux0629 | PartNumber: a15091700ux0629 | Ean: 0712662588696 | UPC: 712662588696
Swelling Of The Shank Occurs Most By The Clinched Head End Of The Rivet..
Solid Rivets Are One Of The Oldest And Most Reliable Types Of Fasteners..
Rivets Can Be Hardened For Some Applications To Improve Strength And Durability..
Solid Rivets Are The Strongest Rivets Used In Fastened Joints..
Features
- Inexpensive alternative to threaded fasteners.
- Solid rivets are the strongest rivets used in fastened joints.
- Swelling of the shank occurs most by the clinched head end of the rivet.
- Rivets can be hardened for some applications to improve strength and durability.
- Solid rivets are one of the oldest and most reliable types of fasteners.
- See more on Amazon...
First Available: 08/20/2018
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell M8 x 1.25 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B097675VWF | Model: a20010400ux0075 | PartNumber: a20010400ux0075
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Features
- Tap Size: M8 x 1.25 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #6
uxcell Upholstery Nails Tacks 16mmx25mm Flat Head Furniture Nails Silver Tone for Furniture Sofa Headboards, 60 Pcs
Asin: B07PK6V56D | Model: a19012700ux0015 | PartNumber: a19012700ux0015
[Easy To Use]: You Can Clamp The Nails With A Plier, Then Use A Rubberized Tack Hammer To Install Them. After Testing, The Nails Can Only Be Nailed Into The Lime Layer On The Surface..
[Convenient]: We Offer You Different Styles, Different Colors And Different Sizes Of Upholstery Nail Tacks For You To Choose From. It Is Easy To Find What You Need And The Item Is Easy To Use..
[Notice]: To Protect Your Hands, It Is Recommended Not To Hold The Nail Directly With Your Hands Since It Probably Jump Or Bend Under Improper Operation. Do Not Use Hammers That Are Too Large And Heavy..
[Multi-Purpose]: Our Decorative Tacks Can Be Used For Various Furniture And Diy Crafts Projects. Not Only For Decorating Upholstery, Sofa, Headboard, Chair, Bench, Stool, Wooden Box, Etc Furniture, But Also For Using On Cork Board Holders For Hanging Lightweight Memos And Pictures..
Features
- [Features]: Head Diameter: 16mm / 0.63inch; Total Length: 25mm / 0.98inch.
- [Multi-purpose]: Our decorative tacks can be used for various furniture and DIY crafts projects. Not only for decorating upholstery, sofa, headboard, chair, bench, stool, wooden box, etc furniture, but also for using on cork board holders for hanging lightweight memos and pictures.
- [Easy to Use]: You can clamp the nails with a plier, then use a rubberized tack hammer to install them. After testing, the nails can only be nailed into the lime layer on the surface.
- [Notice]: To protect your hands, it is recommended not to hold the nail directly with your hands since it probably jump or bend under improper operation. Do not use hammers that are too large and heavy.
- [Convenient]: We offer you different styles, different colors and different sizes of upholstery nail tacks for you to choose from. It is easy to find what you need and the item is easy to use.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 3.94 x 3.94 inches
See On Amazon #7
uxcell Machine Tap 1/4-20 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 2pcs
Asin: B07VFW6S8M | Model: a19050800ux0917 | PartNumber: a19050800ux0917
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: 1/4-20 UNC; Class: 2B; Thread Length: 30mm / 1.18 inch; Shank Side Width: 5mm / 0.2 inch; Total Length: 73mm / 2.87 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell PCB Drill Bits 2.2mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 10 Pcs
Asin: B07ZWDWN3C | Model: a19091500ux0207 | PartNumber: a19091500ux0207
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 2.2mm; cutting edge length: 10.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell PCB Drill Bits 0.2mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 2 Set (20 Pcs)
Asin: B08147C3Q7 | Model: a19091500ux0213 | PartNumber: a19091500ux0213
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.2mm; cutting edge length: 3.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 50pcs M2.5 X 8mm Stainless Steel Phillips Pan Round Head Self Tapping Screws
Asin: B01KXTTSCI | Model: US-SA-AJD-184356 | PartNumber: US-SA-AJD-184356 | Ean: 0602451867449 | UPC: 602451867449
Thread Size: M2.5 X 8Mm / 0.1" X 0.31"(D * L); Head Size: 4 X 1.5Mm / 0.16" X 0.06"(D * T).
Overall Size: 9.5 X 4Mm / 0.37" X 0.16"(L * Max.D); Total Length: 9.5Mm / 0.37".
Drive Type: Phillips; Fastener Type: Self Tapping Screws.
Weight: 13G; Package Content: 50(+/-2%)Pcs X Self Tapping Screws; Main Color: Silver Tone.
Features
- Head Style: Pan Head; Material: Stainless Steel; Product Name: Self Tapping Screw
- Weight: 13g; Package Content: 50(+/-2%)pcs x Self Tapping Screws; Main Color: Silver Tone
- Thread Size: M2.5 x 8mm / 0.1 x 0.31(D * L); Head Size: 4 x 1.5mm / 0.16 x 0.06(D * T)
- Drive Type: Phillips; Fastener Type: Self Tapping Screws
- Overall Size: 9.5 x 4mm / 0.37 x 0.16(L * Max.D); Total Length: 9.5mm / 0.37
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell PCB Drill Bits 1.1mm-2.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSJZXN | Model: a19091500ux0224 | PartNumber: a19091500ux0224
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm; Cutting Edge Length: 10.5mm, 10.5mm, 12mm, 10.5mm, 12mm, 10.5mm, 12mm, 12mm, 12mm, 12mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell M5 x 0.8 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B09766V534 | Model: a20010400ux0071 | PartNumber: a20010400ux0071
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Features
- Tap Size: M5 x 0.8 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #13
uxcell PCB Drill Bits 0.3mm-1.2mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVT1W4L | Model: a19091500ux0227 | PartNumber: a19091500ux0227
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #14
uxcell 10Pcs 2mm Titanium Coat Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07R55MHFM | Model: a19031400ux0501 | PartNumber: a19031400ux0501
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon Board. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- STANDARD: Cutting edge diameter: 2mm / 0.079"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 11.5mm / 0.45"
- MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell PCB Drill Bits 0.15mm-1.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 2 Set (20 Pcs)
Asin: B07ZVSQLSS | Model: a19091500ux0221 | PartNumber: a19091500ux0221
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #16
uxcell Tungsten Carbide Rotary Files 1/8" Shank, Single Cut Ball Shape Rotary Burrs Tool 2mm Dia, for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Engraving, 2pcs
Asin: B07PNPQWZ2 | Model: a19012700ux0194 | PartNumber: a19012700ux0194
Single Cut Design: Single Groove Rotary Files Are More Suitable For The Object Density Is Relatively High, Such As Alloy Steel, Stainless Steel, Hardened Steel.
Tips: Requirement Of The Carbide Burrs Rotating Speed Is: 4000-50000 Rpm. Always Ensure Your Burrs Shank Is Well Inserted Into Your Collet And Clamped Down Tightly.
Versatile Use: Widely Used For Metalwork, Tool Making, Model Engineering, Wood Carving, Jewelry Making,Welding, Chamfering, Casting, Deburring, Grinding, Sculpting.
Long Working Life: Made Of Heat-Treated Tungsten Carbide That Hardness Can Be Up To Above Hra85, Sharp And Sturdy, Long Service Life.
Features
- Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 2mm(1/9"). Fits most rotary die grinders
- Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life
- Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel
- Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting
- Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 0.39 x 0.39 inches
See On Amazon #17
uxcell 74pcs Cobalt Drill Bit Set 12 Sizes 1mm-8mm Drilling Dia Twist Drills Round Shank Bits for Steel, Aluminum, Copper, Soft Alloy Steel, Wood, Plastic
Asin: B0CFHFHB9Y
Quick And Clean Drilling: The External Point Angle Design Of This Cobalt Twist Drill Bit Allows For Fast And Efficient Drilling, With Effective Chip Removal To Prevent Clogging, Perfect For A Range Of Materials Including Metal, Wood, And Plastic..
Note: Please Add Coolant When Drilling Continuously At High Speed, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage. To Ensure Optimal Performance And Longevity, It Is Important To Use Proper Drilling Techniques When Using This Cobalt Twist Drill Bit..
Wide Applications: This Cobalt Twist Drill Bit Is Suitable For A Variety Of Drilling Applications, Including Metalworking, Woodworking, And Plastic Fabrication. It Is Great For Use With Harder Materials Such As Stainless Steel, Titanium, Cast Iron, Malleable Iron, And Other Alloys, Wood, And Plastic, And Is Well-Suited For Both Diy And Professional Use..
M35 Twist Drill Bit: Made From M35 Cobalt Material Which Has The Characteristic Of High Hardness And Durability. The Cobalt Material Gives The Bit Superior Wear Resistance And Overall Toughness, Making It Great For Long-Term Use In A Variety Of Drilling Applications..
Features
- 74pcs Drill Bits Include: 10pcs1mm, 10pcs 1.5mm, 10pcs 2mm, 10pcs 2.5mm, 5pcs 3mm, 5pcs 3.2mm, 5pcs 3.5mm, 5pcs 4mm, 5pcs 5mm, 5pcs 6mm, 2pcs 7mm, 2pcs 8mm drilling dia M35 straight round shank twist drills, can accommodate a wide range of drilling needs.
- M35 Twist Drill Bit: Made from M35 cobalt material which has the characteristic of high hardness and durability. The cobalt material gives the bit superior wear resistance and overall toughness, making it great for long-term use in a variety of drilling applications.
- Quick and Clean Drilling: The external point angle design of this cobalt twist drill bit allows for fast and efficient drilling, with effective chip removal to prevent clogging, perfect for a range of materials including metal, wood, and plastic.
- Wide Applications: This cobalt twist drill bit is suitable for a variety of drilling applications, including metalworking, woodworking, and plastic fabrication. It is great for use with harder materials such as stainless steel, titanium, cast iron, malleable iron, and other alloys, wood, and plastic, and is well-suited for both DIY and professional use.
- Note: Please add coolant when drilling continuously at high speed, the working life of the twist drill bits can be largely prolonged by proper usage. To ensure optimal performance and longevity, it is important to use proper drilling techniques when using this cobalt twist drill bit.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 5PCS 1/8" Shank 2.0mm x 15mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood
Asin: B07KFV6791 | Model: a18092800ux0254 | PartNumber: a18092800ux0254
Spiral & Sharp Router Bits: Large Chip Space Design For Fast And Clean Chip Removal. Spiral Sharp Cutting Edges Provide Smooth Cuts And No Burrs For Increased Efficiency, Not Easy To Stick, Precision Ground..
Tips: Upcut Milling Bits Can Direct Chips Up And Away From The Milling Area, Leaving An Unobstructed Path To Prevent Tool Breakage And Extends The Tool Life. Properly Reduce The Cutting Speed And Feed Rate To Prolong The Service Life..
Carbide End Mills: Tungsten Carbide Has Good Wear Resistance, High Strength And Resistance To Cutting Temperatures. Carbide Can Run At Higher Speed Than High-Speed Steel. Chamfered Shank For Ease Of Use.
Wide Applications: Cnc Router Bits Are Suitable For Acrylic, Pvc, Wood, Nylon, Resin, Abs, Mdf, Plywood, Hardwood. Good For 2D Sculpturing, Cutting, Engraving, Slotting, Milling, Etc. Works With Milling And Engraving Machines..
Features
- 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8"; Cutting Diameter: 2.0mm / 0.08"; Cutting Length: 15mm / 0.6"; Overall Length: 38mm / 1.5"; Number of Flutes: 2 Flutes
- Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines.
- Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground.
- Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use
- Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.15 x 1.97 Inches
See On Amazon #19
uxcell End Mill CNC Router Bits, 1/8" 3.175mm Shank 0.2mm x 1mm Titanium Coated Tungsten Carbide Engraving Milling Cutter for PCB Plastic Fiber Wood 4pcs
Asin: B0B2JXFPT8 | Model: a22033000ux0774 | PartNumber: a22033000ux0774
Carbide Tools G05 Tungsten Carbide Tools Has High Hardness (Hrc94.5), Wear Resistance, Good Toughness And Heat Resistance. With Good Milling And Cutting Performance, Carbide Material Can Ensure High Work Efficiency..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Titanium Coating: Titanium Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction. Sharp Cutting Edge Provides Smooth Cutting And No Glitches..
Wide Applications: Suitable For Engraving And Milling Printed Circuit Boards, Pcb, Mdf, Abs, Pvc, Acrylic, Nylon, Plastic, Wood, Fiber Glass, Carbon Fiber, Density Board, Plasterboard, Etc. Use On Cnc Machining Centers, Machine Tools, Precision Engraving Machines And Other Equipment..
Features
- End Mills: Cutting edge diameter: 0.2mm / 0.008"; shank diameter: 3.175mm / 1/8"; cutting edge length: 1mm / 0.04"; overall length: 37mm / 1.46"; milling direction: right hand; style: corn shape. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc. Use on CNC machining centers, machine tools, precision engraving machines and other equipment.
- Carbide Tools G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. Sharp cutting edge provides smooth cutting and no glitches.
- Tips: The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell HSS(High Speed Steel) Extra Long Twist Drill Bits, 2mm Drill Diameter 300mm Length for Hardened Metal Woodwork Plastic Aluminum Alloy 2 Pcs
Asin: B09XVHBB5B | Model: a22031100ux0288 | PartNumber: a22031100ux0288
[Twisted Design]- With The Twisted Design, It Can Improve Cutting Accuracy By Centering The Tip. It Can Avoid Displacement Of The Drill Bit During Work, And At The Same Time Remove Debris And Particles Faster And Easier..
[Note]- Please Keep Cool And Gentle Using, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage..
[Professional And Diy Use]- Suitable For Processing Non-Ferrous Metals, Such As Copper And Aluminum, And Also Suitable For Hard Plastics. When It Cannot Penetrate, Try To Adjust The Rpm. Suitable For Electric Hand Drill, Bench Drill And Machine Tool Equipment..
[Strength And Hardness]- Made Of High-Speed Steel. Hss(High Speed Steel) Enables The Drill Body Harder And Can Keep A Longer Drilling Life..
Features
- [Specifications]- Twist Drill Bits Diameter: 2mm / 0.08-inch; Drill Bit Length:200mm / 7.87-inch; Shank Diameter: 2mm / 0.08-inch; Total Length: 300mm / 11.81-inch; 2 x Straight Shank Twist Drill Bit
- [Strength and Hardness]- Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
- [Twisted Design]- With the twisted design, it can improve cutting accuracy by centering the tip. It can avoid displacement of the drill bit during work, and at the same time remove debris and particles faster and easier.
- [Professional and DIY Use]- Suitable for processing non-ferrous metals, such as copper and aluminum, and also suitable for hard plastics. When it cannot penetrate, try to adjust the RPM. Suitable for electric hand drill, bench drill and machine tool equipment.
- [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search