Fastronix 300A 1/2" Severe Duty Battery Disconnect Switch with Face Plate
Asin: B07L2JRHRQ | Ean: 0635414975837 | UPC: 635414975837
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Index Pin To Prevent Rotation After Installation.
Use With Fastronix 404-116 Terminal Covers For A Professional Installation.
Optional Use Smaller Auxiliary Studs Rated To 20A@12Vdc For Indicator Light Or Small Accessory.
Can Be Used In Single Pole Or Dual Pole Configuration.
Features
- 1/2" Copper Main Studs Rated to 300A@12VDC Continuous and 2000A Intermittent
- Can be Used in Single Pole or Dual Pole Configuration
- Index Pin to Prevent Rotation after Installation
- Optional Use Smaller Auxiliary Studs Rated to 20A@12VDC for Indicator Light or Small Accessory
- Use with Fastronix 404-116 Terminal Covers for a Professional Installation
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 2.63 x 5.00 x 2.63 inches | Weight: 0.00 pounds
See On Amazon Similar To Fastronix 300A 1 2 Severe
#1
Pertronix 1281 Ignition Conversion Kit for 8CYL FORD
Asin: B000N2XOHQ | Model: 1281 | PartNumber: 1281 | Ean: 0694342000455 | UPC: 694342000455
Rotating Cobalt Magnets Trigger A Hall Effect Integrated Circuit; No Points To Burn; No Moving Parts To Wear Out..
Epoxy Molding Makes Our Module Impervious To Dirt, Oil, Grease And Moisture..
2:1 Improvement Over "Points" In Current Fall Time For Increased Coil Output..
Features
- Delivers twice the voltage to the spark plugs when used with Pertronix Flame Thrower coils, increasing horsepower, fuel economy, and spark plug life.
- 2:1 improvement over points in current fall time for increased coil output.
- Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
- See more on Amazon...
Brand: Pertronix | Manufacturer: Pertronix
Dimensions: 1.60 x 6.10 x 4.70 inches | Weight: 0.20 Pounds
Warranty: 30 Month Limited Warranty on Ignitor products
See On Amazon #2
Fastronix 500A Ultimate Duty Battery Disconnect Switch with Mounting Bracket and Hardware
Asin: B0C5P74S47
M10 Studs Compatible With 3/8" Wire Terminals.
Use With Fastronix 404-110 Terminal Covers For A Complete Installation.
Use Mounting Bracket As A Template To Mount The Switch In Any Panel Up To 1/2" Thick.
Sealed Internals To Ip66 / Iec529 Standards.
Heavy Duty Handle Can Be Held In Place With Roll Pin (Included) Or #10 Machine Screw (Not Included).
Mounting Bracket And Hardware Included, Mount In 96 Configurations.
Features
- Rated to 500A at 12V / 300A at 24V Continuous Duty 2000A Intermittent at 12V
- Mounting Bracket and Hardware Included, Mount in 96 Configurations
- M10 Studs Compatible with 3/8 Wire Terminals
- Heavy Duty Handle can be Held in Place with Roll Pin (Included) or #10 Machine Screw (Not Included)
- Use Mounting Bracket as a Template to Mount the Switch in any Panel up to 1/2 Thick
- Sealed Internals to IP66 / IEC529 Standards
- Use with Fastronix 404-110 Terminal Covers for a Complete Installation
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 5.70 x 3.60 x 3.50 inches
See On Amazon #3
Fastronix 3/8" 4 Stud Power and Ground Distribution Block with Cover
Asin: B0852RZN89 | Model: 406-260 | PartNumber: 406-260
Nickel Plated Brass Bus-Bar And Stainless Steel Hardware For Increased Current Transfer.
Use With Fastronix 2 And 4 Gauge Quality Copper Lugs (405-013 And 405-113).
Block Is 6.5"X 1.375"X 2" And Rated To 250 Amps At 12Vdc.
3 Additional 20 Amp Screw Terminals On Each Block For Smaller Wires.
Features
- Corrosion Resistant 3/8" Stainless Steel Studs
- 3 Additional 20 Amp Screw Terminals on Each Block for Smaller Wires
- Nickel Plated Brass Bus-Bar and Stainless Steel Hardware for Increased Current Transfer
- Block is 6.5x 1.375x 2 and Rated to 250 Amps at 12VDC
- Use with Fastronix 2 and 4 Gauge Quality Copper Lugs (405-013 and 405-113)
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 2.00 x 6.50 x 1.38 inches
See On Amazon #4
Fastronix Eyelet Style Battery Compression Terminal for 3/8" Stud, 1 and 2 Gauge Cable (2pk)
Asin: B00X33OMCI | Model: 405-002 | PartNumber: 405-002 | Ean: 0638037089301 | UPC: 638037089301
Great For Starter Solenoids Or Junction Blocks.
Made From High Quality Cast Copper Which Provides More Strength Than Conventional Copper Lugs.
Includes Two Lugs For 1&2 Gauge Cable With Hole For 3/8" Studs.
Features
- Professional Looking Battery Ends with NO CRIMPING OR SOLDERING
- Includes two lugs for 1&2 gauge cable with hole for 3/8 Studs
- Great for Starter solenoids or Junction Blocks
- Made from High Quality Cast Copper which Provides More Strength than Conventional Copper Lugs
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 0.75 x 2.90 x 0.75 inches
See On Amazon #5
Fastronix Solutions High Current Master Battery Disconnect Switch Kit
Asin: B00Y63TQLG | Model: 930-300 | PartNumber: 930-300 | Ean: 0638037089387 | UPC: 638037089387
Contains #2 3/8" Copper Lugs, Heavy Duty Heat Shrink, And Rubber Terminal Insulators.
Works Great As A Power Disconnect For Rv's When Not In Use.
High Current (180A Continuous/1000A Intermittent) Battery Disconnect Switch With Black On/Off Plate.
Features
- Easy to Use Kit for a Professional Installation
- High Current (180A Continuous/1000A Intermittent) Battery Disconnect Switch with Black On/Off Plate
- Contains #2 3/8 Copper Lugs, Heavy Duty Heat Shrink, and Rubber Terminal Insulators
- Works Great As a Power Disconnect for RV's When Not in Use
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Weight: 1.00 Pounds
See On Amazon #6
Fastronix Aluminum Battery Disconnect Mounting Bracket for 303-001 Switch
Asin: B0CSTGBZVJ | Model: 980-000 | PartNumber: 980-000
Custom Designed Mount Only For The Fastronix 303-001 Battery Disconnect Switch (Switch Is Not Included).
Black Annodized 6061 Aluminum Frame Provides Impeccable Looks And Long Lasting Durability.
Features
- Two 1/4" Mounting Holes for a Secure Connection
- Black Annodized 6061 Aluminum Frame Provides Impeccable Looks and Long Lasting Durability
- Custom Designed Mount ONLY for the Fastronix 303-001 Battery Disconnect Switch (Switch is NOT included)
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 3.20 x 3.00 x 0.50 inches | Weight: 0.22 pounds
See On Amazon #7
Fastronix 175 Amp MEGA/AMG Bolt Down Fuse
Asin: B0CX6PSMWC | Model: 175 Amp | PartNumber: 175 Amp
Features Time Delay Characteristics To Eliminate Worry During Short Duration High Current Events.
Ideal For Alternator Or Vehicle Protection Right From The Battery.
Compatible With Fastronix 500-040 Fuse Holder.
Features
- 175 Amp Rating, Rated to 32 Volts
- Compatible with Fastronix 500-040 Fuse Holder
- Features Time Delay Characteristics To Eliminate Worry During Short Duration High Current Events
- Ideal for Alternator or Vehicle Protection Right from the Battery
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Littelfuse
See On Amazon #8
Fastronix Red and Black Premium Battery Charging Posts with Heavy Duty Mounting Plate
Asin: B07P6D5QSY | Ean: 0037182682403 | UPC: 037182682403
Can Be Mounted In Any Orientation.
Use With Fastronix 404-120 Terminal Covers For A Professional Looking Installation.
Brass Charging Post With Nickel Plated 3/8" Studs.
0.080" Mounting Plate With Three 9/32" Mounting Holes And Terminal Separator.
Features
- Made in the USA!
- 0.080 Mounting Plate with Three 9/32 Mounting Holes and Terminal Separator
- Can be Mounted in ANY Orientation
- Brass Charging Post with Nickel Plated 3/8 Studs
- Use with Fastronix 404-120 Terminal Covers for a Professional Looking Installation
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 3.00 x 5.12 x 3.12 inches
See On Amazon #9
Fastronix 300 Amp Standard ANL Fuse
Asin: B0CYFBMKD1 | Model: 300 Amp | PartNumber: 300 Amp
3000 Amp Interrupt Rating At 32Vdc.
Easily Check Fuse Status Through The Mica Window.
Compatible With Fastronix 500-310 Anl Fuse Holder Kit.
24Kt Gold Plated Conductor.
Pes Plastic Base Material.
Features
- Rated to 300 Amps at 32VDC
- PES Plastic Base Material
- 3000 Amp Interrupt Rating at 32VDC
- 24kt Gold Plated Conductor
- Easily Check Fuse Status Through the Mica Window
- Compatible with Fastronix 500-310 ANL Fuse Holder Kit
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 0.34 x 3.20 x 0.79 inches
See On Amazon
Looking For Something Else?
Search