uxcell Die Stock Handle Wrench Holder for Metric M7-M9 / 12mm-25mmm OD Round Die
Asin: B07M8PSB1C | Model: a18110600ux0062 | PartNumber: a18110600ux0062
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features: Round Die Holder Is Featured With Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screws Should Be Inserted Into The Slot Of The Die And Tightened..
Applications: The Die Handle Wrench Can Help To Repair Damaged Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies (Not Included)..
Features
- Die Stock: Fit capacity size: M7-M9 / 12mm-25mm. Die stock, also called die handle or die wrench, are use in round dies only. Made of tool steel and alloy steel, chrome plated. Provides high hardness, wear resistance, and heat resistance.
- Applications: The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod when used with round dies (not included).
- Features: Round die holder is featured with adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screw in the middle of the die wrench, and the screws should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 8.27 x 0.39 Inches | Weight: 0.00 Pounds
See On Amazon Similar To uxcell Die Stock Handle Wrench
#1
uxcell Die Stock Handle Wrench Holder for Metric M12-M14 / 24mm-38mm OD Round Die
Asin: B07M98XLJM | Model: a18110600ux0064 | PartNumber: a18110600ux0064
Features: Round Die Holder Is Featured With Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screws Should Be Inserted Into The Slot Of The Die And Tightened..
Applications: The Die Handle Wrench Can Help To Repair Damaged Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies (Not Included)..
Features
- Die Stock: Fit capacity size: M12-M14 / 24mm-38mm. Die stock, also called die handle or die wrench, are use in round dies only. Made of tool steel and alloy steel, chrome plated. Provides high hardness, wear resistance, and heat resistance.
- Applications: The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod when used with round dies (not included).
- Features: Round die holder is featured with adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screw in the middle of the die wrench, and the screws should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 12.60 x 1.57 Inches
See On Amazon #2
uxcell 1/2-28 UNEF Tap and Die Set with 38mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool
Asin: B091CVV6ML | Model: a20112100ux0019 | PartNumber: a20112100ux0019
Special Design: High-Speed Steel Machine Tap Is With High Hardness And Toughness For Wear Resistance. Features Just The Base Substrate Without Any Additional Coatings. With Adjustable Screws, The Die Stock Can Securely Hold Round Dies.
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened..
Application: Can Re-Thread Existing Threads In Hard Materials Like Metal, Or Make New Threads In Soft Material Like Plastic. Used To Process Mild Steel, Aluminum, Stainless Steel, Iron, Cast Iron, Alloy Steel, And Hard Plastics, Etc..
Features
- Tap and Die Set: 1/2-28 UNEF thread tap and round die. 38mm (1-1/2") die stock fits 26mm-38mm / M12-M16 capacity, with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications.
- Application: Can re-thread existing threads in hard materials like metal, or make new threads in soft material like plastic. Used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.
- Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Die Stock Handle Wrench Set, 1/2-28 UNEF Threading Die and 38mm (1-1/2") Holder (Fits: 26mm-38mm OD / M12-M16 Round Dies) Adjustable for Bolt Thread Repair
Asin: B093F9B877 | Model: a20102800ux0101 | PartNumber: a20102800ux0101
Features: The Die Holder Provides Good Wear Resistance For Long Service Life. With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Alloy Tool Steel Die Is Not Loose For Conical Locking Hole And Strong Locking, With Hardness, High Torque, Good Toughness And Wear-Resistance..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Application: The Die Handle Wrench Set Can Help To Process, Correct, Clean Male Threads, Or Repair Damaged Bolts And Threads, Or Just Remove Bolts And Threaded Rod. Great For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die & Wrench Set: Die Wrench: 38mm x 14mm die stock fits 26mm-38mm outside diameter die / M12-M16 thread die, with 5 adjustable screws Round Die: 1/2-28 UNEF threading die with 38mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
- Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell 65mm Round Die Stock Handle Wrench, for Metric M30-M36 / 47mm-65mm Round Die, with Knurled Handle
Asin: B07RXQ3D4S | Model: a18122900ux0400 | PartNumber: a18122900ux0400
Features: Round Die Holder Is Featured With 5 Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Frame Helps To Keep The Cutting Tools In Alignment. Can Ensure That The Threads Are Evenly Spaced And Are Cut To The Specifications Required..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screws Should Be Inserted Into The Slot Of The Die And Tightened..
Applications: The Die Handle Wrench Can Help To Repair Damaged Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies (Not Included). Create Uniform Threads On Different Types Of Screws, Bolts, And Pipes..
Features
- Die Stock: Fit capacity size: M30-M36 / 47mm-65mm. Die stock, also called die handle or die wrench, are use in round dies only. Made of zinc alloy and carbon steel, with non-slip knurled handle
- Applications: The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod when used with round dies (not included). Create uniform threads on different types of screws, bolts, and pipes.
- Features: Round die holder is featured with 5 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. The frame helps to keep the cutting tools in alignment. Can ensure that the threads are evenly spaced and are cut to the specifications required.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screw in the middle of the die wrench, and the screws should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 1/4-20 UNC Tap and Die Set with 20mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool
Asin: B091CRNFXB | Model: a20112100ux0006 | PartNumber: a20112100ux0006
Special Design: High-Speed Steel Machine Tap Is With High Hardness And Toughness For Wear Resistance. Features Just The Base Substrate Without Any Additional Coatings. With Adjustable Screws, The Die Stock Can Securely Hold Round Dies.
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened..
Application: Can Re-Thread Existing Threads In Hard Materials Like Metal, Or Make New Threads In Soft Material Like Plastic. Used To Process Mild Steel, Aluminum, Stainless Steel, Iron, Cast Iron, Alloy Steel, And Hard Plastics, Etc..
Features
- Tap and Die Set: 1/4-20 UNC thread tap and round die. 20mm die stock fits 11mm-20mm / M3-M4 capacity, with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications.
- Application: Can re-thread existing threads in hard materials like metal, or make new threads in soft material like plastic. Used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.
- Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 1pcs Round Die Stock Handle Wrench Holder & 2pcs Round Die 1/4-28 UNF Machine Thread Right Hand
Asin: B0BNXN74DV | Model: f22062300ux1579 | PartNumber: f22062300ux1579
Features Of Die Stock: Die Stock, Also Called Die To Handle Is For Use In Round Dies Only. This Die Stock Is For Use With A 20Mm Outside Diameter Split Die. It Features Screws That Allow You To Compress The Die To Take Off More Material (If The Thread Is Too Tight) And Alternatively A Screw That Allows The Die To Spread Open, Which Allows You To Cut The Damaged Bar..
Package Content: 1 X Round Die Stock, 2Pcs X Round Die..
Features Of Round Die: Round Dies Are Perfect For Re-Threading Existing Threads In Hard Materials Like Metal Or Making New Threads In Softer Materials Such As Plastic. Solid Round Dies Are Suitable For General Purpose Threading. Great For Maintenance And Repair Work. Suitable For Maintenance And Repair Work In The Shop Or Field..
Size Of Round Die: Thread Size: 1/4-28 Unf; Outside Diameter: 20Mm / 0.8"; Thickness: 7Mm / 0.28"..
Features
- Size of Round Die Stock: Fit Die Size: 20*7mm / 0.79*0.275 inch(Dia*W); Fit Capacity Size: M4.5-M6 / 8mm-20mm; Overall Length: 172mm / 6.77 inch; Handle Length: 62mm / 2.44 inch; Handle Diameter: 6.8mm / 0.27 inch.
- Size of Round Die: Thread Size: 1/4-28 UNF; Outside Diameter: 20mm / 0.8; Thickness: 7mm / 0.28.
- Features of Die stock: Die stock, also called die to handle is for use in round dies only. This die stock is for use with a 20mm outside diameter split die. It features screws that allow you to compress the die to take off more material (if the thread is too tight) and alternatively a screw that allows the die to spread open, which allows you to cut the damaged bar.
- Features of Round Die: Round dies are perfect for re-threading existing threads in hard materials like metal or making new threads in softer materials such as plastic. Solid round dies are suitable for general purpose threading. Great for maintenance and repair work. Suitable for maintenance and repair work in the shop or field.
- Package Content: 1 X Round Die Stock, 2pcs x Round Die.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell Die Stock Handle Wrench, for Metric M4.5-M6 (Metric) / 3/16"-1/4" (UNC/UNF) / 20mm OD Round Dies, 20mm x 7mm Threading Die Holder with Plastic Handle
Asin: B0CPJCTL7J
Features: Round Die Wrench Is Designed With 4 Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. When Exposed To Liquid Or Moisture, The Ergonomic Plastic Dipped Handle Provides A Secure, Comfortable Grip During Use..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Apply Even And Consistent Pressure While Turning The Die Stock Handle. Tighten The Adjustable Screws Of The Die Stock Firmly Around The Die To Ensure A Secure Grip..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screws Of The Wrench, And The Screws Should Be Inserted Into The Die Groove And Tightened. Apply Cutting Oil Or Lubricant To The Workpiece And Die Before Starting Threading To Get Smoother, Cleaner Threads..
Wide Applications: The Die Handle Wrench Can Accurately Cut, Repair Or Clean External Threads On Rods, Bolts, Screws, Pipes, Shafts, And Other Cylindrical Objects, Or Simply Remove Bolts And Threaded Rods (When Used With Round Dies)..
Features
- Die Stock Wrench: Fit Die Size: M4.5-M6 (Metric) / 3/16"-1/4" (UNC/UNF) / 20mm OD Die; Die Stock Size: 20mm x 7mm / 0.79" x 0.28". The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.
- Wide Applications: The die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).
- Features: Round die wrench is designed with 4 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screws of the wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 4-40 UNC Tap and Die Set with 20mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool
Asin: B091CVJ1F3 | Model: a20112100ux0001 | PartNumber: a20112100ux0001
Special Design: High-Speed Steel Machine Tap Is With High Hardness And Toughness For Wear Resistance. Features Just The Base Substrate Without Any Additional Coatings. With Adjustable Screws, The Die Stock Can Securely Hold Round Dies.
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened..
Application: Can Re-Thread Existing Threads In Hard Materials Like Metal, Or Make New Threads In Soft Material Like Plastic. Used To Process Mild Steel, Aluminum, Stainless Steel, Iron, Cast Iron, Alloy Steel, And Hard Plastics, Etc..
Features
- Tap and Die Set: 4-40 UNC thread tap and round die. 20mm die stock fits 11mm-20mm / M3-M4 capacity, with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications.
- Application: Can re-thread existing threads in hard materials like metal, or make new threads in soft material like plastic. Used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.
- Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 1/2-12 UNS Tap and Die Set with 38mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool
Asin: B091CVRVK3 | Model: a20112100ux0016 | PartNumber: a20112100ux0016
Special Design: High-Speed Steel Machine Tap Is With High Hardness And Toughness For Wear Resistance. Features Just The Base Substrate Without Any Additional Coatings. With Adjustable Screws, The Die Stock Can Securely Hold Round Dies.
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened..
Application: Can Re-Thread Existing Threads In Hard Materials Like Metal, Or Make New Threads In Soft Material Like Plastic. Used To Process Mild Steel, Aluminum, Stainless Steel, Iron, Cast Iron, Alloy Steel, And Hard Plastics, Etc..
Features
- Tap and Die Set: 1/2-12 UNS thread tap and round die. 38mm (1-1/2") die stock fits 26mm-38mm / M12-M16 capacity, with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications.
- Application: Can re-thread existing threads in hard materials like metal, or make new threads in soft material like plastic. Used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.
- Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Round Die Stock Handle Wrench Set, 5/8-18 UNF Threading Die and 38mm (1-1/2") Die Holder (Fits: 26mm-38mm OD Die / M12-M16 Thread Die) Adjustable for Bolt Thread Repair
Asin: B093FB5VL5 | Model: a20102800ux0104 | PartNumber: a20102800ux0104
Features: The Die Holder Provides Good Wear Resistance For Long Service Life. With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Alloy Tool Steel Die Is Not Loose For Conical Locking Hole And Strong Locking, With Hardness, High Torque, Good Toughness And Wear-Resistance..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Application: The Die Handle Wrench Set Can Help To Process, Correct, Clean Male Threads, Or Repair Damaged Bolts And Threads, Or Just Remove Bolts And Threaded Rod. Great For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die & Wrench Set: Die Wrench: 38mm x 14mm die stock fits 26mm-38mm outside diameter die / M12-M16 thread die, with 5 adjustable screws Round Die: 5/8-18 UNF threading die with 38mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
- Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Die Stock Handle Wrench Set, M5 x 0.8 Threading Round Die and 20mm (Fit M3.5-M6 Dies) Holder Adjustable Wrench Hand Tool
Asin: B0B6R9L78K | Model: a22040300ux0327 | PartNumber: a22040300ux0327
Die Stock: Can Help To Repair Broken Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies. With Adjustable Screws, It Can Securely Hold Round Dies And Is Easy To Operate. 45# Carbon Steel Tool Has High Hardness, High Strength And Resistance To Deformation Than Ordinary A3 Steel..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads. Good For Maintenance And Repair Work..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. Necessary Tools For Hand Tapping Operation, Can Improve The Efficiency Of Processing Threads..
Round Die: Suitable For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic. Used For Threading Mild Steel, Aluminum, Stainless Steel, Cast Iron, Alloy Steel And Carbon Steel. Fit For General Purpose Threading..
Features
- Die Stock Wrench Set: 20mm die stock fits M3.5-M6 dies, with adjustable screws. M5 x 0.8 threading round die with 20mm outside diameter, conical locking hole, strong locking and not loose. The round die has good abrasion resistance.
- Round Die: Suitable for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic. Used for threading mild steel, aluminum, stainless steel, cast iron, alloy steel and carbon steel. Fit for general purpose threading.
- Die Stock: Can help to repair broken bolts and threads or just remove bolts and threaded rod when used with round dies. With adjustable screws, it can securely hold round dies and is easy to operate. 45# carbon steel tool has high hardness, high strength and resistance to deformation than ordinary A3 steel.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. Necessary tools for hand tapping operation, can improve the efficiency of processing threads.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads. Good for maintenance and repair work.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Die Stock Handle Wrench Set, 5/8-18 UNF Round Die and 38mm Die Holder (Fits 1/2"-5/8" (UNC/UNF) / Metric M12-M14 / 38mm OD Dies) for Bolt Thread Repair
Asin: B0CQ1WGWYN
Features: Zinc Alloy Steel Die Handle Offers High Hardness, Strength And Durability. Designed With 5 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. 9Sicr Alloy Tool Steel Thread Die Has High Hardness, High Torque, Wear Resistance, And High Tempering Resistance. Conical Lock Hole, Strong Locking Force And No Loosening..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Apply Suitable Cutting Oil Or Lubricant To The Workpiece And Die To Get Smoother, Cleaner Threads. Apply Even And Consistent Pressure While Turning The Die Stock..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Wide Applications: Can Accurately Cut, Repair Or Clean Male Threads On Rods, Bolts, Screws, Pipes And Shafts, Or Just Remove Bolts And Threaded Rods. Suitable For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die Stock Wrench Set Size: Round Die: thread size: 5/8-18 UNF; outside diameter (OD): 38mm / 1.5"; thickness: 10mm / 0.39". Die Stock: fit die size: 1/2"-5/8" (unc/unf) / M12-M14 (metric) / 38mm OD die; die stock size: 38mm x 14mm / 1.5" x 0.55" (D*H). Die stock, also called die handle or die wrench, is use in round dies only.
- Wide Applications: Can accurately cut, repair or clean male threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. Suitable for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: Zinc alloy steel die handle offers high hardness, strength and durability. Designed with 5 adjustable screws, the die stock can securely hold round dies and is easy to operate. 9SiCr alloy tool steel thread die has high hardness, high torque, wear resistance, and high tempering resistance. Conical lock hole, strong locking force and no loosening.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Apply suitable cutting oil or lubricant to the workpiece and die to get smoother, cleaner threads. Apply even and consistent pressure while turning the die stock.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Die Stock Handle Wrench, for Metric M22-M24 (Metric) / 7/8"-1" (UNC/UNF) / 55mm OD Round Dies, 55mm x 18mm Threading Die Holder with Plastic Handle
Asin: B0CPJDCHGV
Features: Round Die Wrench Is Designed With 5 Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. When Exposed To Liquid Or Moisture, The Ergonomic Plastic Dipped Handle Provides A Secure, Comfortable Grip During Use..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Apply Even And Consistent Pressure While Turning The Die Stock Handle. Tighten The Adjustable Screws Of The Die Stock Firmly Around The Die To Ensure A Secure Grip..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screws Of The Wrench, And The Screws Should Be Inserted Into The Die Groove And Tightened. Apply Cutting Oil Or Lubricant To The Workpiece And Die Before Starting Threading To Get Smoother, Cleaner Threads..
Wide Applications: The Die Handle Wrench Can Accurately Cut, Repair Or Clean External Threads On Rods, Bolts, Screws, Pipes, Shafts, And Other Cylindrical Objects, Or Simply Remove Bolts And Threaded Rods (When Used With Round Dies)..
Features
- Die Stock Wrench: Fit Die Size: M22-M24 (Metric) / 7/8"-1" (UNC/UNF) / 55mm OD Die; Die Stock Size: 55mm x 18mm / 2.17" x 0.71". The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.
- Wide Applications: The die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).
- Features: Round die wrench is designed with 5 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screws of the wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Die Stock Handle Wrench Holder for Metric M4.5-M6 / 8mm-20mm OD Round Die
Asin: B07M8F6TLL | Model: a18110600ux0061 | PartNumber: a18110600ux0061
Features: Round Die Holder Is Featured With Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screws Should Be Inserted Into The Slot Of The Die And Tightened..
Applications: The Die Handle Wrench Can Help To Repair Damaged Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies (Not Included)..
Features
- Die Stock: Fit capacity size: M4.5-M6 / 8mm-20mm. Die stock, also called die handle or die wrench, are use in round dies only. Made of tool steel and alloy steel, chrome plated. Provides high hardness, wear resistance, and heat resistance.
- Applications: The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod when used with round dies (not included).
- Features: Round die holder is featured with adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screw in the middle of the die wrench, and the screws should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 6.30 x 0.79 inches
See On Amazon #15
uxcell 5/8-11 UNC Tap and Die Set with 38mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool
Asin: B091CXD3K3 | Model: a20112100ux0021 | PartNumber: a20112100ux0021
Special Design: High-Speed Steel Machine Tap Is With High Hardness And Toughness For Wear Resistance. Features Just The Base Substrate Without Any Additional Coatings. With Adjustable Screws, The Die Stock Can Securely Hold Round Dies.
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened..
Application: Can Re-Thread Existing Threads In Hard Materials Like Metal, Or Make New Threads In Soft Material Like Plastic. Used To Process Mild Steel, Aluminum, Stainless Steel, Iron, Cast Iron, Alloy Steel, And Hard Plastics, Etc..
Features
- Tap and Die Set: 5/8-11 UNC thread tap and round die. 38mm (1-1/2") die stock fits 26mm-38mm / M12-M16 capacity, with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications.
- Application: Can re-thread existing threads in hard materials like metal, or make new threads in soft material like plastic. Used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.
- Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 20mm Round Die Stock Handle Wrench Holder for Metric M4-M6 / 6mm-20mm Round Die, Zinc Alloy Carbon Steel
Asin: B07SWJFN1Q | Model: a19041000ux0342 | PartNumber: a19041000ux0342
Features: Round Die Holder Is Featured With 4 Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Frame Helps To Keep The Cutting Tools In Alignment. Can Ensure That The Threads Are Evenly Spaced And Are Cut To The Specifications Required..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screws Should Be Inserted Into The Slot Of The Die And Tightened..
Applications: The Die Handle Wrench Can Help To Repair Damaged Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies (Not Included). Create Uniform Threads On Different Types Of Screws, Bolts, And Pipes..
Features
- Die Stock: Fit capacity size: M4-M6 / 6mm-20mm. Die stock, also called die handle or die wrench, are use in round dies only. Made of zinc alloy and carbon steel, it has high hardness and wear resistance.
- Applications: The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod when used with round dies (not included). Create uniform threads on different types of screws, bolts, and pipes.
- Features: Round die holder is featured with 4 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. The frame helps to keep the cutting tools in alignment. Can ensure that the threads are evenly spaced and are cut to the specifications required.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screw in the middle of the die wrench, and the screws should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Die Stock Handle Wrench Set, M15 x 1.5 Threading Round Die and 38mm (Fit M12-M16 Dies) Holder Adjustable Wrench Hand Tool
Asin: B0B6R8TRTN | Model: a22040600ux0757 | PartNumber: a22040600ux0757
Die Stock: Can Help To Repair Broken Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies. With Adjustable Screws, It Can Securely Hold Round Dies And Is Easy To Operate. 45# Carbon Steel Tool Has High Hardness, High Strength And Resistance To Deformation Than Ordinary A3 Steel..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads. Good For Maintenance And Repair Work..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. Necessary Tools For Hand Tapping Operation, Can Improve The Efficiency Of Processing Threads..
Round Die: Suitable For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic. Used For Threading Mild Steel, Aluminum, Stainless Steel, Cast Iron, Alloy Steel And Carbon Steel. Fit For General Purpose Threading..
Features
- Die Stock Wrench Set: 38mm die stock fits M12-M16 dies, with adjustable screws. M15 x 1.5 threading round die with 38mm outside diameter, conical locking hole, strong locking and not loose. The round die has good abrasion resistance.
- Round Die: Suitable for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic. Used for threading mild steel, aluminum, stainless steel, cast iron, alloy steel and carbon steel. Fit for general purpose threading.
- Die Stock: Can help to repair broken bolts and threads or just remove bolts and threaded rod when used with round dies. With adjustable screws, it can securely hold round dies and is easy to operate. 45# carbon steel tool has high hardness, high strength and resistance to deformation than ordinary A3 steel.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. Necessary tools for hand tapping operation, can improve the efficiency of processing threads.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads. Good for maintenance and repair work.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Round Die Stock Handle Wrench Set, 7/16-14 UNC Threading Die and 38mm (1-1/2") Die Holder (Fits: 26mm-38mm OD Die / M12-M16 Thread Die) Adjustable for Bolt Thread Repair
Asin: B093F8ZLGR | Model: a20102800ux0096 | PartNumber: a20102800ux0096
Features: The Die Holder Provides Good Wear Resistance For Long Service Life. With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Alloy Tool Steel Die Is Not Loose For Conical Locking Hole And Strong Locking, With Hardness, High Torque, Good Toughness And Wear-Resistance..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Application: The Die Handle Wrench Set Can Help To Process, Correct, Clean Male Threads, Or Repair Damaged Bolts And Threads, Or Just Remove Bolts And Threaded Rod. Great For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die & Wrench Set: Die Wrench: 38mm x 14mm die stock fits 26mm-38mm outside diameter die / M12-M16 thread die, with 5 adjustable screws Round Die: 7/16-14 UNC threading die with 30mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
- Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 5/16-32 UNEF Tap and Die Set with 25mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool
Asin: B091CWFZBH | Model: a20112100ux0010 | PartNumber: a20112100ux0010
Special Design: High-Speed Steel Machine Tap Is With High Hardness And Toughness For Wear Resistance. Features Just The Base Substrate Without Any Additional Coatings. With Adjustable Screws, The Die Stock Can Securely Hold Round Dies.
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened..
Application: Can Re-Thread Existing Threads In Hard Materials Like Metal, Or Make New Threads In Soft Material Like Plastic. Used To Process Mild Steel, Aluminum, Stainless Steel, Iron, Cast Iron, Alloy Steel, And Hard Plastics, Etc..
Features
- Tap and Die Set: 5/16-32 UNEF thread tap and round die. 25mm die stock fits 16mm-25mm / M7-M8 capacity, with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications.
- Application: Can re-thread existing threads in hard materials like metal, or make new threads in soft material like plastic. Used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.
- Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #20
uxcell 55mm Round Die Stock Handle Wrench Holder,for Metric M24-M27 / 36mm-55mm Round Die
Asin: B07S1SFV3L | Model: a18122900ux0399 | PartNumber: a18122900ux0399
Features: Round Die Holder Is Featured With 5 Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Frame Helps To Keep The Cutting Tools In Alignment. Can Ensure That The Threads Are Evenly Spaced And Are Cut To The Specifications Required..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screws Should Be Inserted Into The Slot Of The Die And Tightened..
Applications: The Die Handle Wrench Can Help To Repair Damaged Bolts And Threads Or Just Remove Bolts And Threaded Rod When Used With Round Dies (Not Included). Create Uniform Threads On Different Types Of Screws, Bolts, And Pipes..
Features
- Die Stock: Fit capacity size: M24-M27 / 36mm-55mm. Die stock, also called die handle or die wrench, are use in round dies only. Made of zinc alloy and carbon steel.
- Applications: The die handle wrench can help to repair damaged bolts and threads or just remove bolts and threaded rod when used with round dies (not included). Create uniform threads on different types of screws, bolts, and pipes.
- Features: Round die holder is featured with 5 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. The frame helps to keep the cutting tools in alignment. Can ensure that the threads are evenly spaced and are cut to the specifications required.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screw in the middle of the die wrench, and the screws should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search