uxcell 4mm Diamond Drill Bits Hole Saws for Glass Tile Porcelain Marble Ceramic Bottles Pots Brick Pack of 10
Asin: B07MKMXY64 | Model: a18112200ux0229 | PartNumber: a18112200ux0229
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Large Clearance Hole: The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. The Cutting Is Flat And Smooth Without Scratches..
Tips: Use At Low Drilling Speeds And Drilling Pressure. Always Work With Coolant (Water) When Drilling. Not Suited For Concrete Or Depth Beyond About 1/2 Inch. The Hole Should Be Entered Smoothly, And No Side Pressure Is Applied..
Features: Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws. Nickel Plating On These Bits Maximizes Your Tools Life With Great Resistance To Corrosion..
Wide Applications: Suitable For Cutting Accurate Holes On Glass, Ceramic, Tile, Porcelain, Marble, Stone Bottles And Pots. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Features
- Diamond Drill Bits: Electroplated diamond is uniform and more wear-resistant. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- Wide Applications: Suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. Not suitable for drilling tempered glass, plastic and wood.
- Large Clearance Hole: The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. The cutting is flat and smooth without scratches.
- Features: Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. Nickel plating on these bits maximizes your tools life with great resistance to corrosion.
- Tips: Use at low drilling speeds and drilling pressure. Always work with coolant (water) when drilling. Not suited for concrete or depth beyond about 1/2 inch. The hole should be entered smoothly, and no side pressure is applied.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 4mm Diamond Drill Bits
#1
uxcell Straight Shank Twist Drill Bits 4mm High Speed Steel 4341 with 4mm Shank 5 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D111YW | Model: a19102500ux0106 | PartNumber: a19102500ux0106
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 4mm / 0.16"; Shank Diameter : 4mm / 0.16"; Cutting Edge Length: 44mm / 1.73"; Total Length : 75mm / 2.95"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 1mm Diamond Twist Drill Bits High Speed Steel for Glass Sea Shells Stone Tiles 10 Pcs
Asin: B07R76ZZG4
[Applicable Machine] - Widely Used In Rotary Tool Such As Hand Drills, Drill Press, Flex Shafts, Bench Drill And Hanging Mill..
[Notice] - When Drilling, It Is Necessary To Add Cutting Fluid In Time To Lubricate And Cool Down, Which Can Get A Better Drilling Hole Wall, Extends The Service Life And Drilling Accuracy..
[Application] - Suitable For Drilling Small Holes On Glass, Soft Metal, Sea Shells, Jade, Pearls, Drywall And Son On..
[Material] - Diamond Coated High Speed Steel(Hss) Is Made By Spiral Technology, Has Both Toughness And Hardness, Is Not Easy To Break. The Drill Bit Is Sharp, And Is Easy For Chip Removal..
Features
- [SIZE] - 1mm diameter, 11mm length twist drill bit with 0.7mm shank.
- [MATERIAL] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal.
- [APPLICABLE MACHINE] - Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill.
- [APPLICATION] - Suitable for drilling small holes on glass, soft metal, sea shells, jade, pearls, drywall and son on.
- [NOTICE] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 5PCS 15mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain Bottles Pots Brick
Asin: B073LTC6W1 | Model: US-SA-AJD-336568 | PartNumber: US-SA-AJD-336568
Nickel Plated Surface - Nickel Plating Surface Can Extend The Service Life And Enhance The Surface Corrosion Resistance. Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws..
Applications - Perfect For Drilling Glass, Ceramics, Porcelain, Ceramic Tile, Porcelain Tile, Limestone, Slate, Marble, Light Stone And Fiberglass. (Need To Be Used At A Low Speed; Always Use Lubrication (Water) When Processing, Otherwise The Hole Saw Will Burn.).
Special Design - The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Diamond Coated - Diamond Coating Enhances The Drilling Speed, Which Makes The Bit More Sharp.Electroplated Diamond Is Uniform And More Wear-Resistant..
Features
- SIZE - 15mm(6.3-inch) Drilling Diameter, 6.5mm(0.25-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
- NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
- SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
- APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Twist Drill Bit Set 3mm 4mm, HSS (High Speed Steel) 4341 Titanium Nitride Coated Straight Round Shank Drilling Tool, for Stainless Steel Alloy Copper, 10pcs
Asin: B09X9C86BV | Model: f21102900ux0015 | PartNumber: f21102900ux0015
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Tips: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier And Improving Smoothness And Dimensional Accuracy. When Using Hand-Held Electric Drill, The Recommended Speed Is 100-1000Rpm/Min; The Larger The Drilling Diameter, The Slower The Drilling Speed..
Titanium Nitride Coating: Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant Than The Regular Black Surface..
Wide Applications: Widely Used For Drilling Stainless Steel, Aluminum Alloy, Iron, Copper, Wood And Plastic. Used On Electric Hand Drill, Drilling Machine And Bench Drill. Drill Metal With High Hardness Or Foreign Substance, The Rotational Speed Should Be Slower Than Normal Drilling..
Features
- Twist Drill Bit: Cutting edge diameter: 3mm / 0.12", 4mm / 0.16", cutting edge length: 27mm / 1.06", 44mm / 1.73". Features high hardness, good toughness, high wear resistance, suitable for most general purpose applications.
- Wide Applications: Widely used for drilling stainless steel, aluminum alloy, iron, copper, wood and plastic. Used on electric hand drill, drilling machine and bench drill. Drill metal with high hardness or foreign substance, the rotational speed should be slower than normal drilling.
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Titanium Nitride Coating: Gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant than the regular black surface.
- Tips: Suitable lubricant is conducive to cutting or cooling, making cutting easier and improving smoothness and dimensional accuracy. When using hand-held electric drill, the recommended speed is 100-1000rpm/min; the larger the drilling diameter, the slower the drilling speed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #5
uxcell 10 Pcs 6mm Diamond Coated Hole Saws Drill Bits for Glass Ceramic Tile Marble Rock Porcelain Bottles Pots Brick
Asin: B073LW7B7K | Model: US-SA-AJD-314586 | PartNumber: US-SA-AJD-314586
Nickel Plated Surface - Nickel Plating Surface Can Extend The Service Life And Enhance The Surface Corrosion Resistance. Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws..
Applications - Perfect For Drilling Glass, Ceramics, Porcelain, Ceramic Tile, Porcelain Tile, Limestone, Slate, Marble, Light Stone And Fiberglass. (Need To Be Used At A Low Speed; Always Use Lubrication (Water) When Processing, Otherwise The Hole Saw Will Burn.).
Special Design - The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Diamond Coated - Diamond Coating Enhances The Drilling Speed, Which Makes The Bit More Sharp.Electroplated Diamond Is Uniform And More Wear-Resistant..
Features
- SIZE - 6mm(1/4-inch) Drilling Diameter, 5.5mm(0.22-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
- NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
- SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
- APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 2.76 inches
See On Amazon #6
uxcell Straight Shank Twist Drill Bits 4.5mm High Speed Steel 4341 with 4.5mm Shank 5 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CXDLC3 | Model: a19102500ux0110 | PartNumber: a19102500ux0110
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 4.5mm / 0.18"; Shank Diameter : 4.5mm / 0.18"; Cutting Edge Length: 45mm / 1.77"; Total Length : 80mm / 3.15"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell Solid Carbide Drill Bits, 4.1mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic 2pcs
Asin: B09WYL2KGS | Model: a22021800ux0596 | PartNumber: a22021800ux0596
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 4.1mm / 0.161"; Flute Length: 25mm / 0.98"; Overall Length: 43mm / 1.69"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 6pcs Jobber Drill Bits 4mm (0.157") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9GFCQH
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 4mm / 0.157"; round shank diameter: 4mm / 0.157"; cutting edge length: 43mm / 1.69"; overall length: 70mm / 2.76"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 21mm, 24mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain 4pcs
Asin: B0BMX7XJGF | Model: f22062300ux1955 | PartNumber: f22062300ux1955
Nickel Plated Surface - The Nickel Plating Surface Can Extend The Service Life And Enhance Surface Corrosion Resistance..
Applications - Perfect For Drilling Glass, Ceramics, Porcelain, Ceramic Tile, Porcelain Tile, Limestone, Slate, Marble, Light Stone And Fiberglass. (Need To Be Used At A Low Speed; Always Use Lubrication (Water) When Processing, Otherwise The Hole Saw Will Burn.).
Special Design - Side Open Can Remove The Waste To Keep The Drill Bit Clean..
Diamond Coated - Diamond Coating Enhances The Drilling Speed, Which Makes The Bit Sharper..
Features
- Size - 21mm Drilling Diameter, 8mm Shank(2pcs); 24mm Drilling Diameter, 8mm Shank(2pcs)
- Diamond Coated - Diamond coating enhances the drilling speed, which makes the bit sharper.
- Nickel Plated Surface - The nickel plating surface can extend the service life and enhance surface corrosion resistance.
- Special Design - Side open can remove the waste to keep the drill bit clean.
- Applications - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 2.1mm Diamond Twist Drill Bits High Speed Steel for Glass Sea Shells Stone Tiles 5 Pcs
Asin: B07R658SQS
[Applicable Machine] - Widely Used In Rotary Tool Such As Hand Drills, Drill Press, Flex Shafts, Bench Drill And Hanging Mill..
[Notice] - When Drilling, It Is Necessary To Add Cutting Fluid In Time To Lubricate And Cool Down, Which Can Get A Better Drilling Hole Wall, Extends The Service Life And Drilling Accuracy..
[Application] - Suitable For Drilling Small Holes On Glass, Metal, Sea Shells, Jade, Pearls, Marble, Stones, Drywall And Son On. Due To The Different Hardness Of The Material, The Effect Is Also Different..
[Material] - Diamond Coated High Speed Steel(Hss) Is Made By Spiral Technology, Has Both Toughness And Hardness, Is Not Easy To Break. The Drill Bit Is Sharp, And Is Easy For Chip Removal..
Features
- [SIZE] - 2.1mm diameter, 21mm length twist drill bit with 1.8mm shank.
- [MATERIAL] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal.
- [APPLICABLE MACHINE] - Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill.
- [APPLICATION] - Suitable for drilling small holes on glass, metal, sea shells, jade, pearls, marble, stones, drywall and son on. Due to the different hardness of the material, the effect is also different.
- [NOTICE] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #11
uxcell 16mm Diamond Core Drill Bits Dry or Wet Hole Saws for Hard Concrete Brick Block Masonry Stone Tile Glass
Asin: B091HRTCJQ | Model: a20112600ux0424 | PartNumber: a20112600ux0424
Dry Or Wet Drilling: Can Be Dry Or Wet Drilling. To Prolong The Using Life, It Is Recommended To Be Used With Water For Cooling And Lubrication..
Sharp Cutting Edge: The Core Drill Bits Cut Clean And Fast Holes, And Make Drilling Process Much Easier. Can Be Used On An Electric Hand Drill Or Another Machine, Such As An Angle Grinder, Hex, Or Round Plus Shank..
Large Clearance Hole: Facilitates The Entrance Of Cooling Water And The Escape Of Chips And Other Particles From Drilling To Aid In Faster Cutting And Coring..
Applications: Suitable For Drilling Concrete, Masonry, Hard Brick, Ceramic Tiles, Marble, Stone, Engineering Stone, Brick, Vitrified Tiles, And Other Hard Materials..
Features
- Drilling diameter: 16mm / 0.63"; drilling depth: 10mm / 0.39"; shank size: 9.5mm / 0.37". Non-slip triangle shank fits most electric hand drills and bench drills.
- Applications: Suitable for drilling concrete, masonry, hard brick, ceramic tiles, marble, stone, engineering stone, brick, vitrified tiles, and other hard materials.
- Dry or Wet Drilling: Can be dry or wet drilling. To prolong the using life, it is recommended to be used with water for cooling and lubrication.
- Large Clearance Hole: Facilitates the entrance of cooling water and the escape of chips and other particles from drilling to aid in faster cutting and coring.
- Sharp Cutting Edge: The core drill bits cut clean and fast holes, and make drilling process much easier. Can be used on an electric hand drill or another machine, such as an angle grinder, hex, or round plus shank.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell PCB Drill Bits 0.4mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 2 Set (20 Pcs)
Asin: B07ZVSSQK6 | Model: a19091500ux0217 | PartNumber: a19091500ux0217
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.4mm; cutting edge length: 6.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #13
uxcell Carbide Twist Drill Bits 4mm, DIN K45 Tungsten Carbide AlTiSin Coated Jobber Drill Bits Straight Shank Drilling Cutter for Stainless Steel Alloy Steel
Asin: B09VSTZSMG | Model: a22012300ux0241 | PartNumber: a22012300ux0241
Material: Constructed From Ultra-Fine Din K45 (Iso P10) Tungsten Carbide, The Drill Bit Is Good Toughness, High Hardness And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Used For Precision Cutting Of Alloy Steel, Tool Steel, Stainless Steel, Hardened Steel And Other High-Hardness And Difficult-To-Machine Materials. The Altisin Composite Coating Has High Hardness, High Wear Resistance And High Thermal Stability..
Features
- Twist Drill Bits: Drilling Diameter: 4mm / 0.157"; Flute Length: 23mm / 0.91"; Overall Length: 45mm / 1.77". Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Used for precision cutting of alloy steel, tool steel, stainless steel, hardened steel and other high-hardness and difficult-to-machine materials. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
- Material: Constructed from ultra-fine DIN K45 (ISO P10) tungsten carbide, the drill bit is good toughness, high hardness and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #14
uxcell 1.2mm Diamond Twist Drill Bits High Speed Steel for Glass Sea Shells Stone Tiles 10 Pcs
Asin: B07R45XKNX
[Applicable Machine] - Widely Used In Rotary Tool Such As Hand Drills, Drill Press, Flex Shafts, Bench Drill And Hanging Mill..
[Notice] - When Drilling, It Is Necessary To Add Cutting Fluid In Time To Lubricate And Cool Down, Which Can Get A Better Drilling Hole Wall, Extends The Service Life And Drilling Accuracy..
[Application] - Suitable For Drilling Small Holes On Glass, Metal, Sea Shells, Jade, Pearls, Marble, Stones, Drywall And Son On. Due To The Different Hardness Of The Material, The Effect Is Also Different..
[Material] - Diamond Coated High Speed Steel(Hss) Is Made By Spiral Technology, Has Both Toughness And Hardness, Is Not Easy To Break. The Drill Bit Is Sharp, And Is Easy For Chip Removal..
Features
- [SIZE] - 1.2mm diameter, 13mm length twist drill bit with 1mm shank.
- [MATERIAL] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal.
- [APPLICABLE MACHINE] - Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill.
- [APPLICATION] - Suitable for drilling small holes on glass, metal, sea shells, jade, pearls, marble, stones, drywall and son on. Due to the different hardness of the material, the effect is also different.
- [NOTICE] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell 10PCS 5/32-inch(4mm) Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain Bottles Pots Brick
Asin: B073LRJ44R | Model: a16121200ux0993 | PartNumber: a16121200ux0993
Nickel Plated Surface - Nickel Plating Surface Can Extend The Service Life And Enhance The Surface Corrosion Resistance. Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws..
Applications - Perfect For Drilling Glass, Ceramics, Porcelain, Ceramic Tile, Porcelain Tile, Limestone, Slate, Marble, Light Stone And Fiberglass. (Need To Be Used At A Low Speed; Always Use Lubrication (Water) When Processing, Otherwise The Hole Saw Will Burn.).
Special Design - The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Diamond Coated - Diamond Coating Enhances The Drilling Speed, Which Makes The Bit More Sharp.Electroplated Diamond Is Uniform And More Wear-Resistant..
Features
- SIZE - 4mm(5/32-inch) Drilling Diameter, 3.5mm(0.14-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
- NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
- SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
- APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 2pcs 22mm Diamond Drill Bit Hole Saw for Glass Tile Marble Fiberglass Ceramic Stone Bottles Pots
Asin: B07FYCLVMW | Model: a18060600ux0202 | PartNumber: a18060600ux0202
Large Clearance Hole: The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. The Cutting Is Flat And Smooth Without Scratches..
Tips: Use At Low Drilling Speeds And Drilling Pressure. Always Work With Coolant (Water) When Drilling. Not Suited For Concrete Or Depth Beyond About 1/2 Inch. The Hole Should Be Entered Smoothly, And No Side Pressure Is Applied..
Features: Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws. Nickel Plating On These Bits Maximizes Your Tools Life With Great Resistance To Corrosion..
Wide Applications: Suitable For Cutting Accurate Holes On Glass, Ceramic, Tile, Porcelain, Marble, Stone Bottles And Pots. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Features
- 22mm Diamond Drill Bits: 2.5mm x 4mm (thickness x height) electroplated diamond is uniform and more wear-resistant. The hole saw achieves high precision and smooth cuts without edge breakage. Made of high-quality alloy steel, with good toughness and high strength.
- Wide Applications: Suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. Not suitable for drilling tempered glass, plastic and wood.
- Large Clearance Hole: The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. The cutting is flat and smooth without scratches.
- Features: Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. Nickel plating on these bits maximizes your tools life with great resistance to corrosion.
- Tips: Use at low drilling speeds and drilling pressure. Always work with coolant (water) when drilling. Not suited for concrete or depth beyond about 1/2 inch. The hole should be entered smoothly, and no side pressure is applied.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 2 Pcs High Speed Steel Hex Shank Twist Drill Bit, 4mm Drilling Dia with 1/4 Inch Hex Shank 95mm Length
Asin: B09YTZHQ4P | Model: a22032200ux1033 | PartNumber: a22032200ux1033
135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Dual Coating Of Gold Titanium And Black Nitride For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 4mm / 0.16-inch; Total Length: 95mm / 3.74-inch; Drill Bit Length: 42mm / 1.65-inch; 2 x Twist Drill Bits
- Material: Made of high speed steel with dual coating of gold titanium and black nitride for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Diamond Hole Saw Core Drill Bit, 16mm Diameter 1/4" Hex Shank Sintered Diamond Hole Cutter for Masonry Porcelain Tile Marble Stone 2pcs
Asin: B09Z6PVW6C | Model: a22032400ux0605 | PartNumber: a22032400ux0605
Sintered Diamond: Diamond Grains Are Permanently Sintered To The Cutting Edge From Inside To Outside. Sintered Diamond Has The Sharpening Property But Electroplated Or Brazed Diamond Can Not Be Sharpened..
1/4 Inch Hex Shank: Quick Change 1/4 Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. Fits Most Bench Drills, Hand Electric Drills. Tips: Reduced Drill Speeds, Low Drill Pressure And Increased Use Of Water Lubrication Will Extend Drill Bit Life Considerably..
Features: Large Clearance Hole Facilitates Entrance Of Cooling Water And Escape Of Chips And Other Particles From Drilling. Creates A Precision And Smooth Cut, Less Chipping And Minimizing Breakage..
Wide Applications: Suitable For Drilling Porcelain, Tile, Marble, Stone, Masonry, Brick, Glass. Can Be Dry Or Wet Use. It Is Recommended To Be Used With Water For Cooling And Lubrication To Prolong The Using Life And Increase The Performance..
Features
- Core Drill Bits: Drilling diameter: 16mm / 0.63"; hex shank size: 1/4"; working depth (max .): 43mm / 1.69"; total length: 73mm / 2.87". Provide high efficiency, fast and smooth drilling, but also ensure longer working life.
- Wide Applications: Suitable for drilling porcelain, tile, marble, stone, masonry, brick, glass. Can be dry or wet use. It is recommended to be used with water for cooling and lubrication to prolong the using life and increase the performance.
- Sintered Diamond: Diamond grains are permanently sintered to the cutting edge from inside to outside. Sintered diamond has the sharpening property but electroplated or brazed diamond can not be sharpened.
- Features: Large clearance hole facilitates entrance of cooling water and escape of chips and other particles from drilling. Creates a precision and smooth cut, less chipping and minimizing breakage.
- 1/4 Inch Hex Shank: Quick change 1/4 inch hex shank can be used on power tools more easily and securely. Fits most bench drills, hand electric drills. Tips: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 0.9mm 1.2mm Diamond Twist Drill Bits High Speed Steel for Glass Sea Shells Stone Tiles 4 Pcs
Asin: B0CSK3VMW4
[Application Machine] - Widely Used In Rotary Tool Such As Hand Drills, Drill Press, Flex Shafts, Bench Drill And Hanging Mill..
[Notice] - When Drilling, It Is Necessary To Add Cutting Fluid In Time To Lubricate And Cool Down, Which Can Get A Better Drilling Hole Wall, Extends The Service Life And Drilling Accuracy..
[Application] - Suitable For Drilling Small Holes On Glass, Metal, Sea Shells, Jade, Pearls, Marble, Stones, Drywall And Son On. Due To The Different Hardness Of The Material, The Effect Is Also Different..
[Material] - Diamond Coated High Speed Steel(Hss) Is Made By Spiral Technology, Has Both Toughness And Hardness, Is Not Easy To Break. The Drill Bit Is Sharp, And Is Easy For Chip Removal..
Features
- [Size] - 0.9mm diameter, 11mm length twist drill bit with 0.6mm shank, 1.2mm diameter, 13mm length twist drill bit with 1mm shank.
- [Material] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal.
- [Application Machine] - Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill.
- [Application] - Suitable for drilling small holes on glass, metal, sea shells, jade, pearls, marble, stones, drywall and son on. Due to the different hardness of the material, the effect is also different.
- [Notice] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search